Professional Documents
Culture Documents
A PROJECT REPORT
Submitted by
UPADHYAY RAKSHITA R. (100800109012)
MISTRY TRUSHA J.
(110803109001)
CERTIFICATE
This is to certify that the dissertation entitled PLC AND HMI BASED STENTER
MACHINE has been carried out by UPADHYAY RAKSHITA R . & MISTRY
TRUSHA J. under my guidance in fulfilment of the Degree of Bachelor of Engineering
in Electrical engineering (8th Semester) of Gujarat Technological University,
Ahmedabad during the academic year 2014.
Date:
Internal Guide:
MAYURI TAHILRAMANI
UJJAVAL PATEL
Asst. Professor
H.O.D(ELECTRICAL)
VIER (kotambi)
VIER (kotambi)
Signature _____________
Signature_____________
External Guide:
ISHAN K. SHETH
Mega switchgears
Signature _______
ii
ACKNOWLEDGMENT
We hereby get the opportunity to express our gratitude towards all people whose
contribution was very much important for establishment of our project.
First of all, We are thankful to Assistant Professor MAYURI TAHILRAMANI ,
Dept. of Electrical, VADODARA INSTITUTE OF ENGINEERING for her valuable,
precious guidance and active support during the Dissertation work. We heartily thankful to
her for his time to time suggestions and the clarity of the concepts of the topic helped us a lot
during this study.
We are also thankful to our external guide ISHAN SHETH of MEGA
SWITCHGEAR, who kept an eye on our progress of work and always was available when
we needed his advice also providing all possible facilities to overcome problems during our
work. He gave us guidance about how to start learning and how to continue. Without him we
are sure not to learn these all things so quickly and deeply.
UPADHYAY RAKSHITA R.
(100800109012)
MISTRY TRUSHA J.
(110803109001)
iii
SELF-DECLARATION CERTIFICATE
We have defined our project based on inputs at Mega Switchgear and each of us will
make significant efforts to make attempt to solve the challenges. We will attempt the
project work at my college or at any location under the direct and consistent
monitoring of ISHAN SHETH. We shall adopt all ethical practices to share credit
amongst all the contributors based on their contributions during the project work.
(We will work on the project work under the direct and consistent monitoring of
Industry mentors and Faculty Guides)
We have not purchased the solutions developed by any 3rd party directly and the
efforts are made by me/us under the guidance of guides. The project work is not
copied from any previously done projects directly.
The project work submitted by me/us is prepared by me/us and I/we fully understand
the contents. We will make best efforts to solve the problems given by the user/
industry. If the project is in relay model (kho-kho) we will share credits with the
initial contributors.
Mega switchgears to the best of my knowledge are a genuine industry, engaged in
the professional service organizations. We understand and accept that the above
declaration if found to be untrue, it can result in punishment /cancellation of project
definition to me/we including failure in the subject of project work.
1.
2.
Date:
Place: VADODARA
iv