Professional Documents
Culture Documents
TABLE OF CONTENTS
The Basics
Schedule of Basic FA Processes
Hints for Running SQRs, Cobols, and Reports
Navigations and Descriptions for Most Commonly Used Pages
SAP Policy
Setups
Federal Aid Year
Financial Aid Year
Valid Careers for Aid Years
Valid Programs for Aid Year and Career
Valid Terms for Career
School Codes for Institution
Career for School Codes
Financial Aid Defaults
Aid Processing Rule Setup
Term Values Cross Reference
Aid Year Setup
Financial Aid EDI Transactions
ISIR Data Load Parameters
Assign Status to Admit Levels
Define Demographic Data Use
Define Commit Levels
INAS 20XX-20XX Global Options
Maintain ISIR Comment Codes
Setup FA Term
Financial Aid Career Type
Create Budget Categories
Create Budget Items
Create Budget Groups
Budget Formulas
Application Source Ranking
Assign Career/ Budget Assignment
Aggregate Aid Limit
Aggregate Program
Loan Fee Setup
Financial Aid Item Types
Fiscal Item Types
Award Messages
Disbursement Plan Table
Disbursement Split Code
Disbursement Split Code Formulas
Disbursement Global Rules
Define Item Type Rules
Scholarship Packaging
Service Indicators
Summer Applications
Summer Loan Applications
Summer Loan Packaging Query
Summer Loan Packaging
Summer Packaging
Verifying Curriculum
Viewing FA Term Panels
Viewing Registration/Grade Panels VCCS Customization
After the Last Day to Withdraw w/o Academic Penalty (through the end of the semester):
SQRS:
Should be run on the Client to the File
COBOLS
Should be run on the Server to the File
REPORTS CRYSTAL QUERIES
Should be run on the Client to the Window
Can then be printed
You should use the JTCCID Run Control ID for most processes. Some processes,
such as running MILs, updating packaging variables, and updating checklists,
require a specific run control and will be indicated on the process documentation
for each.
** If you should need help with a particular panel, you can click on the Help link.
To check if we received a students ISIR and if any other items are required:
Navigation: Home> Campus Community> Checklists> Person Checklists> Person
Checklist Summary
Click on Search
You will see what checklist items have been completed or are still required and are at
the initiated Item Status. Click on the View link next to the Item you are interested in
for further details, such as when the checklist item was assigned. Typically, it was
assigned approximately 30 days prior to the Due Date that is listed on this page.
If no matching entries are found, then we have not received the students ISIR
from CPS and they will need to contact the federal processor to have our school
code added, assuming they have already filed a FAFSA for the current year.
If a matching entry is found, click to highlight it, and click OK. The following will
result.
As shown above, this students ISIR was suspended since the student was not found in
our database. Most likely, the student has not applied for admission to JTCC and will
need to do so before their ISIR will be loaded.
**Occasionally, a students ISIRs will suspend due to multiple EMPLIDs. If the student
states that they have applied for admission to the College, this might be the case.
You will see which communications we have sent the student on this page. If you
cannot determine the type of communication from the Letter Code, click on the Letter
Details tab or the View link next to the communication you are interested in for further
details.
The students awards will be displayed here. Whether or not the disbursement has
taken place will also be shown here.
If you do not see any awards, and packaging has been completed for the student, it
most likely means that the student was only eligible for loans and has been sent a No
Need Letter.
Your Search Results will be displayed. Click on the Comment Category you are
interested in viewing.
A new window will open, as shown below, providing you with the specific comment
verbiage, who assigned it, and when.
Overview
Created/Revised
Date
Version
SAP Policy
This procedure details the SAP Policy.
10/16/06
Revised N/A
8.9
Federal regulations require each institution that receives Title IV funds to adopt and
administer a policy on Satisfactory Academic Progress (SAP). The elements required for
the policy are contained in the Code of Federal Regulations sections 688.16, 668.32 and
668.34.
To be eligible to receive financial aid at your college, students must make Satisfactory
Academic Progress toward achieving a certificate or degree. Progress is measured by
the students cumulative grade point average and credits earned in relation to those
attempted and the length of the academic program. Satisfactory Academic Progress for
financial aid applicants is evaluated when students apply for financial aid and after each
term is completed. Per federal regulation, all enrollments at your college and all
applicable transfer credits will be considered whether or not aid was awarded or
received. If eligibility for financial aid is suspended for lack of satisfactory academic
progress, a student may appeal this action if extenuating circumstances exist.
The criteria for Satisfactory Academic Progress are as follows:
Completion Rate (67% Rule): Students must earn at least 67% of the credit
hours they attempt. This calculation is performed by dividing the number of credit
hours earned by the number of credit hours attempted. All courses attempted at
your college are included and this evaluation begins when a student has
attempted credits that total 50% or more of their program requirements or 24
credits (whichever comes first). Satisfactory grades are A, B, C, D, P, R, and S.
Unsatisfactory grades are F, I, U, W, and X.
Grade Point Average (GPA Rule): Students must earn at least the minimum
cumulative grade point average, as shown below, once they have attempted a
specified number of credit hours.
Credit Hours Attempted Minimum Required GPA
13 - 23 credit hours
1.50
24 - 29 credit hours
1.75
2.00
* Please note that only courses with grades of A, B, C, D, and F are included in
this calculation. In addition, in order to graduate, a minimum of a 2.0 cumulative
grade point average is required.
Maximum Time (150% Rule): Students must complete their degree or certificate
after they have attempted 150% of their program requirements. Students who
have attempted a number of credits that total 150% or more of their program
requirements have not made satisfactory academic progress. All enrollment
periods at your college and all applicable transfer credits are counted, even
semesters when aid was not received. Developmental courses are not included
in this calculation. Failure of this rule is permanent.
Students who withdraw from courses frequently run the risk of losing their
financial aid eligibility. This is the primary reason that students fail to make
satisfactory academic progress and lose their financial aid eligibility.
Students whose eligibility for financial aid has been suspended for lack of
satisfactory academic progress may appeal the action. The appeal will normally
be granted if, in the judgment of the Financial Aid staff, the student can correct
the deficiency within one to two semesters, and the student has provided
evidence of an unusual mitigating circumstance such as a death in the family, or
a personal illness. Students must complete the SAP Appeal Form (available in
the Financial Aid Office) and it must be submitted with supporting documentation.
The appeal must be received by the Financial Aid Office no later than 15 days
after the date on the letter of notification. Students will be notified in writing of the
results of the appeal within 30 days of receipt of the appeal. A student may only
apply for an appeal once and if approved, it would be valid for one semester only.
Students who lose their eligibility for financial aid due to lack of satisfactory
academic progress and do not qualify for an appeal can regain their eligibility if
they are able to correct their deficiency. This can be accomplished by taking
courses at your college with out-of-pocket funds. It is important to realize that
failure of the 150% Rule is permanent and cannot be corrected unless the
student completes their degree or certificate program and begins a new program.
At that time, only the credits from the previous program that are applicable to the
new program would be considered in the SAP evaluation for the 150% Rule.
The purpose of the above information is to assist students in making informed
decisions regarding their academic career at your college. Any questions
regarding this information should be directed to the Financial Aid Office.
STEP
This procedure details how to review the federal aid year table.
11/7/06
Revised N/A
V8.9
(Shared Table- First Step before you can do any other setups)
Navigation: Setup SACR> Product Related> Financial Aid> Aid Year> Define Federal Aid
Years
Start Date and End Date: Enter the dates that your institution's academic year begins and ends.
Academic Year Start and End dates are reported on the origination record to the COD system.
STEP
Navigation: Set Up SACR, Product Related, Financial Aid, Aid Year, Define Financial Aid
Years, Financial Aid Year
Enter the dates that your institution's academic year begins and ends. Academic Year Start and
End dates are reported on the origination record to the COD system.
STEP
Navigation: Set Up SACR, Product Related, Financial Aid, Aid Year, Valid Careers for Aid
Year
Insert additional rows for all academic careers for this aid year at your institution.
INAS Rule Set Select an Institutional Need Analysis (INAS) rule set to define need analysis
calculation options to associate with this career.
The INAS rule set value allows full flexibility to determine how need analysis is performed. The
INAS Rule Set table is loaded into the system using a data mover script delivered to your
institution each year in a regulatory release.
Select the INAS Rule Set from the available options: CSS Rules, Health Pro (health professional),
or Ugrd/Grad (undergraduate/graduate).
The INAS rule sets are delivered as translate values and should not be changed or altered in any
way. Additional INAS rules sets can be created for your institution by creating additional translate
values.
STEP
Navigation: Set Up SACR, Product Related, Financial Aid, Aid Year, Valid Programs for Aid
Year, Valid Programs for Aid Year and Career
Enter only those programs that require a different need analysis or aid processing rule set than
the installation defaults or the rule sets assigned to the program's career. If none of the academic
programs within a career requires rule sets that differ from the career's rule sets, do not set up
any programs for that career on this page.
For each academic program that you enter on this page, enter only those fields that differ from
the career's value or the installation default value. For example, if the academic program uses the
same INAS rule set as the career, but requires a different aid processing rule set, populate only
the Aid Processing Rule Set field on this page.
Click the Copy button to access the Copy Programs for Aid Year and Career page and copy
program-level defaults from one combination of academic institution, aid year, and career to
another
STEP
Navigation: Set Up SACR, Product Related, Financial Aid, Aid Year, Valid Terms for
Careers
Defining the valid terms for each financial aid career provides the system with general guidelines
for awarding and processing financial aid within the academic year.
Term Select a term for which financial aid is awarded. The available options include only the
terms identified in the Term/Session Table (TERM_TABLE) for the career. After you enter a term
value and exit the field, the Descr and Short Desc fields populate automatically. These values are
defined on the Term Values Table page (TERM_VALUES_XREF).
Award Period Indicates a term or set of terms associated with a period of enrollment for the
purposes of need analysis and awarding. The term's award period supplements the EFC
adjustment calculation as it relates to calculations that are not nine-month calculations. The
Packaging routine uses the award period to apply active or passive mode correctly during
multiple award period processing. It is also used to manage the type of data to extract for the
financial aid notification (FAN) letter.
Academic: Indicates that the term is part of the standard academic year, and is generally
associated with the nine-month EFC calculation. This is the default value.
Non Std (non standard): Indicates that the term is a nonstandard term, such as an intersession or
summer term, and is generally associated with calculations that are other than nine-month EFC
calculations.
Loan Period Start and Loan Period End
The dates that the loan period begins and ends.
Student Records supplies default dates. These dates are required for each term to build a valid
loan period dynamically. The start date should correspond to the first day of instruction for the
term and the end date should correspond to the last day of instruction for the term. When the
Loan Origination record is built, the system calculates the loan period using the earliest loan
period start date and latest loan period end date from the terms contained within the
disbursement plan assigned to the loan award.
You can change period start and end dates at a student's individual loan origination level.
STEP
This table is to ensure your school code is set up for aid year.
11/7/06
Revised N/A
V8.9
Inst. Specific- part of roll over
Navigation: Set Up SACR, Product Related, Financial Aid, Aid Year, School Codes for
Institution, School Codes for Institution
Links an aid year with the Department of Education Title IV school codes for your institution.
STEP
Specify the valid careers that exist for each Title IV school code
at your institution.
Created/Revised 11/7/06
Date
Revised N/A
Version
V8.9
Inst. Specific- part of roll over
Navigation: Set Up SACR, Product Related, Financial Aid, Aid Year, Careers for School
Codes
Aggregate Aid processing uses this information about school codes and careers to track a
student's financial aid history at your institution. The loan system uses this information to create
loan institution records during setup.
Academic Career
Select an academic career that is valid for the displayed aid year and
school code. You can only select academic careers that you have defined as valid for the
displayed aid year on the Valid Careers for Aid Year page.
Copy
Click to access the Copy Careers for School Code page and copy valid careers
from one combination of academic institution, aid year, and school code to another.
STEP
Navigation: Set Up SACR, Install, Financial Aid Installation, Financial Aid Defaults
Set up defaults as shown below:
Select the INAS Rule Set from the available options: CSS Rules, Health Pro (health professional),
or Ugrd/Grad (undergraduate/graduate).
The INAS rule sets are delivered as translate values and should not be changed or altered in any
way. Additional INAS rules sets can be created for your institution by creating additional translate
values.
Pell Calculation Start Enter the load value to use for Pell calculations made before the
student's academic term start date.
Enrollment Current Load: Directs the Pell calculation to use the Current Load value from Financial
Aid Term to determine which Federal Pell Grant disbursement schedule to use when calculating
the student's eligibility for a Pell Grant. The Current Load value uses the number of units that the
student is currently enrolled in, plus the number of units from already completed sessions in the
term to determine the student's load for the term.
Enrollment FA Load: Directs the Pell calculation to use the FA Load value from Financial Aid
Term to determine which Federal Pell Grant disbursement schedule to use when calculating the
student's eligibility for a Pell Grant. The FA Load value uses the number of financial aid eligible
units that the student is enrolled in for the term to determine the student's load.
Full Time: Directs the Pell calculation to always use the full time Federal Pell Grant disbursement
schedule to determine the student's eligibility for a Pell Grant regardless of the student's
enrollment.
Half Time: Directs the Pell calculation to always use the half time Federal Pell Grant
disbursement schedule to determine the student's eligibility for a Pell Grant, regardless of the
student's enrollment.
Pell Calculation Midterm
Enter the load value to use for Pell Grant calculations made on
or after the student's academic term start date but before the student's term census date. The
available values match those for Pell Calculation Start.
Pell Calculation Census
Enter the load value to use for Pell Grant calculations made on
or after the student's term census date. The available values match those for Pell Calculation
Start.
Pell Number of Terms This field represents the term type numerically. If your institution has
semesters, enter 2. If your institution has trimesters or quarters, enter 3. Although this value
should match the TERM_TYPE on the ACAD_CAR_TBL, no automatic cross-check occurs
between the two to ensure that these values correlate. The Packaging routine uses this value to
distribute a Pell Grant properly between terms when making a Pell calculation using the Full Time
or Half Time values.
GAP Item Type
GAP is an artificial figure that instructs the Packaging routine to set aside
an amount of unmet need to be funded later. It prevents full funding to any student to conserve
funds or to allow room to award other types of aid in the future. The GAP financial aid item type
that you enter in this field is used when you assign a GAP packaging rule in a packaging plan.
Select the appropriate GAP financial aid item type that you have created in this field.
Packaging Data Source
Select which application data to use when packaging a student
for financial aid. The system also instructs the Equation Processor which application data to
gather for use in equations.
Fed Only (federal only): This is the default value. Instructs the Packaging routine to gather data
from the ISIR_** records. When Fed Only is selected, students are packaged only if they have
federal application data (ISIR) available. If Fed Only is selected and the student has no ISIR data,
the student is not packaged and the following error message is displayed during packaging:
Student has no ISIR data.
Fed, Inst (federal, institutional): Instructs the Packaging routine to gather federal application data
(ISIR) if available. Otherwise the routine gathers institutional application data (PROFILE or Need
Access). If neither federal nor institutional application data exists for the student, the student is
not packaged and the following error message is displayed during packaging:
'Student has neither ISIR nor Institutional data.
Inst Only (institutional only): Instructs the Packaging routine to gather data from the INST_**
records. When Inst Only is selected students are packaged only if they have institutional
application data (PROFILE, Need Access, or institutional application) available. If Inst Only is
selected and the student has no PROFILE or Need Access data, the student is not packaged and
the following error message is displayed during packaging:
Student has no Institutional data.
Inst, Fed (institutional, federal): Instructs the Packaging routine to gather institutional application
data (PROFILE, Need Access, or institutional application) if available. Otherwise the routine
gathers federal application data (ISIR). If neither institutional nor federal application data exists for
the student, the student is not packaged and the following error message is displayed during
packaging:
Student has neither ISIR nor Institutional data.
Aggregate Source
Select which source for aggregate lifetime totals packaging should
reference when determining lifetime limits Select from the options:
NSLDS: Packaging uses National Student Loan Data System (NSLDS) aggregate history totals
that have been pushed into the PeopleSoft aggregate tables for packaging. NSLDS aggregate
history data can be loaded and pushed directly during ISIR and FAH data loads.
PS: This option is the default value. Packaging uses the existing undergraduate and graduate
totals currently maintained by the institution on the aggregate tables for packaging.
Note: Aggregate Source is either set at the installation default level or individually for each
student on the Packaging Status Summary or award page components.
Inst Application Source (institutional application source)
Enter the institutional application
used when you select Fed, Inst, Inst Only, or Inst, Fed as the Packaging Data Source. You can
select Inst App (institutional application), NA (Need Access), or Profile.
CNAS FM Rule Set (Canadian need analysis system federal methodology rule set)
Enter
the rule set that defines the Canadian need analysis (CNAS) calculation guidelines using federal
methodology.
CNAS IM Rule Set Canadian need analysis system institutional methodology rule set)
Enter
the rule set that defines the Canadian need analysis (CNAS) calculation guidelines using
institutional methodology.
Last Loan Batch Sequence
Enter a new sequence number of the last loan Batch ID code
processed. The system automatically updates this field each time a CommonLine or Direct Loan
transaction file is created You may need to update this if a conflict occurs.
Background Errors Allowed Enter the number of background errors that your institution wants
to allow during background processing before the system terminates the run. You may want to
set this field to a number greater than one. If you do not increase this value, background
processing stops after encountering only one error.
Last Packaging Batch Nbr (last packaging batch number)
The system generates this value
when you run the Mass Packaging process.
Activation Indicators:
Freshman Loan 30 Day Delay Select to ensure loans awarded to first-time, first-year students
are assigned to a disbursement plan with the 30 Day Delay Loan Plan option selected.
Pell Just In Time Institution Select if your institution participates in the Just-In-Time program
for Pell funding. This sets the Just-In-Time flag. When this flag is set, the Pell Disbursement
Outbound process compares the disbursement date to the system date and does not process
outbound records if the process date is more than three days from the disbursement date found
on student award tables. Based on accepted origination and disbursement records, the funds for
the requested disbursement are directly deposited into your institution's account.
FFELP Serial MPN Activation (federal family educational loan program serial master promissory
note activation)
Select to indicate that your institution qualifies for serial master
promissory note (MPN) processing. The field controls the default settings of the Serial MPN fields
in the CommonLine loan destination profile components. Select even if you have groups within
your institution that do not qualify for serial MPN processing based on a regulatory or school
policy.
Audit FA Term Build (audit financial aid term build)
Select if you want the system to write a
row to the audit table if any changes occur to audited fields when you rebuild an FA term. View
changes to the audited fields for a student using the FA Term Field Audits page. If you clear this
check box, you cannot view the FA Term Field Audits page.
STEP
Create aid processing rule sets that you can use to define
defaults at the career and program level that differ from the
installation default values.
Created/Revised 11/7/06
Date
Revised N/A
Version
V8.9
Navigation: Set Up SACR, Product Related, Financial Aid, Aid Year, Aid Processing Rule
Setup
Pell Calc Midterm- Full Time b/c it refers to the start of the term to census
STEP
10
Navigation: Set Up SACR, Product Related, Financial Aid, Aid Year, Term Values Cross
Reference
Set up the Term Values Cross Reference page to process all options except General Aid Year
and Aggregate Aid Limits. Confirm that your records department has set up term values for the
target aid year being created and has also associated each term with the appropriate career in
the Term/Session table. Term values that are set up in Cross Reference that do not exist in
Student Records are not created for the tables being processed. You should verify term setup in
Student Records before you set up your Term Values Cross Reference.
From Term
To Term
STEP
11
Navigation: Set Up SACR, Product Related, Financial Aid, Aid Year, Aid Year Setup
SetID
Institution
Copy From Aid Year
Copy To Aid Year
Override Aid Year
Eff Date
Today
From Table
Select the SetID. In cases in which Institution and SetID are keys, the
system rolls only those rows found that match on both the SetID and
Institution. For example, the Loan Fee Table is keyed by SetID and
Institution, so if you specify SetID = Your Institution = PSUNV, the
system does not create rows for SetID of PSUNV with Institution PSUNV
for the aid year created by the process.
Select the institution to process the source year and copy to the target
year.
Select the source aid year.
Select the target aid year.
Select to override setup tables in the target year for which they might
already be created. When you select this check box, the system rolls
over a new record along with records that have already been rolled over.
If you have updated the tables in the target year either manually or after
you have run the aid year process, and you run aid year rollover again
with this check box selected, the system overwrites the updated target
data with source year data. If the check box is cleared and you have
made changes to the source year data, the system does not roll these
changes forward to the target year if the target table has already been
created.
The Override Aid Year option works differently for budgets. When you
select the Budget Table option and the Override Aid Year is not
activated, the system rolls forward only new rows added in the source
year to the target year. This way, data that has been rolled previously is
preserved, and the system adds new source year data to it.
With the exception of disbursement rules and budgets, the process rolls
forward only the latest effective-dated row from the source year to the
target year. The process rolls over rows to the new aid year using one of
three effective-dated choices, and if applicable, existing sequence,
process, criteria, etc. For disbursement rules and budgets, the process
rolls forward all active rows and always uses the source date as the
effective date. You must manually adjust these dates. For all options, the
process does not rollover inactive rows unless you select the Rollover
Inactive Rows option.
Inserts the current date for all effective dates rows created except for
disbursement rules and budgets.
Inserts the date used in base year rows for all effective-dated rows
created in the target year.
Budget Tables
Disbursement Rules
Packaging
Return of TIV
ISIR
Loan Tables
PELL Payment
PROFILE
Save your rollover options and click Run to run the process FA_AID_YEAR in Process Scheduler.
Carefully review the message log generated by this process. You can access the message log
multiple ways, but only one way provides you with additional detail. Click Process Monitor to
locate the appropriate process instance for the FA_AID_YEAR Application Engine process. Click
Details and then click Message Log. For each process action, you can click Explain to review
additional information about the action taken or the action that you might need to take.
Must run General Aid Year table and Aggregate Aid Limits first. Then the others below.
Check the message log after youve run these processes to ensure that the process in fact ran
correctly.
STEP
12
Navigation: Set Up SACR, Product Related, Financial Aid, File Management, Maintain EDI
Transactions
STEP
13
Define how ISIR data from the CPS is loaded into the system.
11/7/06
Revised N/A
V8.9
Navigation: Set Up SACR, Product Related, Financial Aid, File Management, ISIR Data
Load Parameters
STEP
14
Navigation: Set Up SACR, Product Related, Financial Aid, File Management, Assign Status
to Admit Levels
External data loads, such as the FAFSA, the CSS PROFILE application, and the Access Group
Need Access application, can take into consideration a students admission status and academic
progress. According to your business rules, you decide how to take into account different
academic program statuses during the external data load and which level of student to add to the
database.
Review the admit level associations to familiarize yourself with the academic program status and
the associated admit levels.
The system displays all available academic program status options.
Associated Admit Level
Associate an admit level with each academic program status.
The associated admit level that you select is important to the selections that you make when
setting up your ISIR data load parameters. The associated admit levels are associated with the
student academic program status in Student Records. Options are:
5 - Accepted/Continuing
4 - Admitted
3 - Applied/Pending
2 - Inactive
1 - Has Not Applied
STEP
15
Navigation: Setup SACR, Product Related, Financial Aid, Define Demographic Data Use
Select the appropriate option for each of the fields.
Award Notification process is new to FE FAN. You must insert a
Process Name
new row and select Award Notification as the process name.
Address Usage
Reserved for financial aid processes and is not used for loans.
Perm Addr Usage(permanent address usage) Used to set the permanent address for loan
processing.
Mail Addr Usage(mail address usage) Used for temporary address.
Name Usage
Indicates what name to use for the student or borrower.
Phone Usage
Indicated the type of phone such as business phone or cellular
phone. Used to select phone usage table settings defined in Campus Community setup.
Email Usage
Indicates the type of email address such as home, business, dorm,
campus, or other. Used to select email usage table settings defined in Campus Community setup.
Address Usage Table
Click to access the Address Usage page to define or review
address usages.
Name Usage Table
Click to access the Name Usage page to define or review name
usages.
Phone Usage Table
Click to access the Phone Usage page to define or review phone
usages.
STEP
16
Navigation: Set Up SACR, Product Related, Financial Aid, File Management, Define
Commit Levels
Fin Aid Default Commit Level Enter the default commit level, which indicates to the system
when to save records while processing for any process that does not have a specific commit level
assigned to it on this page. For example, if you enter 50, the system saves the processing after
every 50 records that it processes. If you do not enter a value in this field, the default commit level
is 0, which directs the system to save after each record is processed.
Process Name
Enter or select the process name for which you want to set commit levels.
Insert additional rows for each process for which you want to set a commit level.
Commit Level
Enter a numeric value for the commit level for each process. The commit
level instructs the system when to save records while it is running a process. For example, if you
enter 50, the system saves the processing after every 50 records that it processes.
STEP
17
Define your local policy options. Select the options for the
majority of your student population. You can override local
policy options on a student-by-student basis. The options that
you select affect both your global and institutional INAS
calculations. The system sets the CSS Base Rules/Values by
default. You can enter values for additional INAS rule sets
developed by your institution.
Created/Revised 11/7/06
Date
Revised N/A
Version
V8.9
Navigation: Set Up SACR, Product Related, Financial Aid, Application Processing, INAS
2005 2006 Global Options
INAS Rule Set Select the INAS rule set.
The INAS rule set value enables full flexibility to determine how need analysis is processed for
different academic careers or academic programs; it is linked to a specific academic career or
program through the valid careers for aid year and valid programs for aid year tables. Your
institution can create additional INAS rule sets. The INAS rule set refers to the INAS base rules
delivered with the Financial Aid system. Values are: CSS Rules/Values,
Undergraduate/Graduate, Health Professional
Global
The Global group box defines the parameters that control general processing options related to
methodologies used.
INAS Data Source
Select the INAS data source for the INAS process to use to retrieve
student information. Values are:
Federal: INAS retrieves only federal data.
Institutnl (institutional): INAS retrieves only institutional data.
Both F/I (both federal and institutional): INAS retrieves both sets of data.
INAS Calc Type (INAS calculation type)
Select the INAS calculation type. Values are:
FM (federal methodology).
IM (institutional methodology).
FM & IM (federal methodology and institutional methodology).
Federal
The Federal group box defines how INAS processes federal ISIR data.
Calc Fed Tax - Student (calculate federal tax - student) Select to calculate and display federal
tax for the student as defined by INAS.
Calc Fed Tax - Parent (calculate federal tax - parent) Select to calculate and display federal
tax for the parent as defined by INAS.
Click on FM Budget Durations. Very Important to have FM Budget Durations for Academic
and Non-Standard as shown below:
If student only attends one term then FM Budget Duration should be changed to 5 and 3-change
on ISIR panels.
STEP
18
ISIR Comments- Review delivered ISIR comment codes and set severity levels. DB Match Use
setting can be adjusted to control treatment by the packaging process. This page links the
comment codes with the long description or text defined by the Department of Education.
STEP
SETUP FA TERM
Overview
19
Navigation: Set Up SACR, Product Related, Financial Aid Term, Setup Financial Aid Term,
FA Term Setup
Enter a row for every academic career that you assign.
Select
Select the check box to the left of all the terms to use in the automatic financial aid term build
process when building terms in projection.
Term
Displays all of the terms that you associated with this combination of aid year and academic
career on the Valid Terms for Careers page. If you do not select a term on this page, no FA Term
information is built for the term when building terms in projection. If enrollment data exists for a
term, that term is always built, even if the term is not selected on this page. During packaging, if
your disbursement plan covers a term that does not have FA Term information, the system
generates an error during the validation process.
Session
Displays the default session, such as a regular academic session or an Open Entry/Open Exit
session, as established on the Session Table page in the Term/Session Table component. If your
institution has more than one session for a term, this page displays only the default session.
Weeks of Instruction
Displays the number of weeks of instruction for the default session, established on the Session
Table page in the Term/Session Table component.
Census Dt (census date)
Displays the date used to capture the students enrollment for the term, established in the Census
Date field on the Session Table page in the Term/Session Table component. If no FA census
date is defined for the term on the FA Term Setup page, the financial aid term build process uses
this census date to determine when to stop building terms with projected data and when to
discard all terms built with projected data.
FA Census Dt (financial aid census date)
If you want to stop building terms with projected data, and discard all terms built with projected
data, after a certain date in the term, enter that date in this field. The term can no longer be built
as a projection after the date that you enter in this field, and any projections for that term become
inactive.
Lock
For census date activation. Select to lock certain student enrollment fields as of either the census
date or the financial aid census date. If both dates exist, the financial aid census date is used. If
you run the financial aid term build process on or after the census date, the system does not
change the data in these fields. You can override this lock at the student level on the financial aid
term component. The fields that are locked are FA_LOAD (Financial Aid Load field on the Acad
Level page) and UNT_TAKEN_FA (Taken field in the Term column on the Statistics page) on the
FA Term table. The BUDGET_REQUIRED field (on the Financial Aid Info page) is changed to No
Assign after the census date.
If the term has no census date or financial aid census date, this check box has no effect. If the
check box next to the term is cleared, then the Lock check box has no effect, even if it is selected.
Make sure the Lock is checked.
If the last day to Add/Drop a class is the same as Census you dont need to uncheck the Select
box. If the dates differ from Census, once Census passes, go back and uncheck the Select
boxes.
Never chose the select box so it does not project for Summer.
STEP
20
Navigation: Set Up SACR, Product Related, Financial Aid, Financial Aid Terms, Define
Career Types
When a student has more than one academic career, Financial Aid Term statistics are combined
for all academic careers that have the same financial aid career type. For example, if a student
has two academic careers (undergraduate engineering and undergraduate) and the FA Career
Type field is Undergraduate for both academic careers, Financial Aid Term statistics are
combined for the two academic careers.
If the FA Career Type field is not the same for a student with multiple academic careers, the
academic career primacy rules are used. The term statistics for the academic career with the
higher primacy is used for the FA Term data. The term statistics for the academic career with the
lower primacy are defined as other; you can view these statistics on the FA Term Other Units
page.
The FA Career Type field is located on ACAD_CAR_TBL.
FA Career Type
Select the financial aid career type to associate with the displayed academic career. You have
only one active effective-dated row for each academic career. If you need to change the career
type associated with the academic career, change the value selected in this field. Financial Aid
delivers the following translate values; you can add additional translate values: E: Extended
Education. G: Graduate. P: Professional. U: Undergraduate. This is the default value.
STEP
21
Navigation: Set Up SACR, Product Related, Financial Aid, Budgets, Budget Categories
Category
Enter a four-character code for each budget component. All academic careers share budget
categories.
You must create a tuition budget category called TUIT to select the Match Fees check box on the
Disbursement Rules: Global - Indicators page. When you select this check box, the authorization
process automatically checks for the amount of tuition using the TUIT budget category.
Item Class
The system calculates the federal COA and institutional COA (optional) by totaling the budget
categoriesand, therefore, budget itemsdesignated for each COA. A budget category's item
class designates whether the budget category contributes to the federal and institutional COA or
contributes only to the institutional COA. The federal COA is the sum of budget amounts for
budget categories designated as Federal. The institutional COA is the sum of budget amounts for
budget categories designated as either Federal or Institutional. For example, books are a federal
budget category and counts towards both the federal COA and institutional COA, while a
computer is an institutional budget category and counts only towards the institutional COA. Leave
this field blank if the budget category does not contribute to either the federal or institutional COA.
Pell Category
This field is available only for budget categories with an item class of Federal. The Pell category
associates this budget category (and the category's budget items) to the Pell budget (Pell Annual
COA), the Pell Less Than Half-Time budget (Pell LTHT Annual COA), and Alternate Pell budget
(Alternate Pell Annual COA). If a budget category does not count toward the Pell budget, Pell
LTHT budget or Alternate Pell budget, leave this field blank. Otherwise, select from the following:
Books: Designates the cost of books. Budget items with this Pell category are included in the Pell
COA and Pell LTHT COA calculation.
Child Care: Designates dependent child care costs. Budget items with this Pell category are
included in the Pell COA and Pell LTHT COA (if allowed), and Alternate Pell COA calculation.
Disability: Designates disability-related costs for a student. Budget items with this Pell category
are included in the Pell COA calculation and Alternate Pell COA calculation.
Fees: Designates a fee charged by the institution. Budget items with this Pell category are
included in the Pell COA and Pell LTHT COA calculation.
Housing: Designates housing costs. Budget items with this Pell category are included in the Pell
COA calculation.
Loan Fees: Designates estimated loan fee costs if the student receives loans. Budget items with
this Pell category are included in the Pell COA calculation.
Personal: Designates an estimated amount for miscellaneous personal costs. Budget items with
this Pell category are included in the Pell COA calculation.
Transport: Designates transport costs. Budget items with this Pell category are included in the
Pell COA and Pell LTHT COA calculation.
Tuition: Designates tuition costs only (does not include student activity fees and other types of
fees). Budget items with this Pell category are included in the Pell COA and Pell LTHT COA
calculation and Alternate Pell COA calculation.
Copy Setup Data
Click to access the Copy Budget Category Data page from which you can copy the information
from one combination of academic institution and aid year to another.
STEP
22
Navigation: Set Up SACR, Product Related, Financial Aid, Budgets, Budget Items
You can have multiple budget items for each category. If the budget amounts within a category
differ depending on the type of term, you must create a separate budget item for each term.
FA_UNIT_ANTIC
FA_UNIT_COMPLETED
FA_UNIT_CURRENT
FA_UNIT_IN_PROG
REFUND_PCT
UNIT_TAKEN_FA
UNIT_TAKEN_FA_CL
WEEKS_OF_INSTRUCT
Use the budget multiplier to build budget items on a per unit or per week basis. For example, if
you charge tuition based on the number of units that a student takes, you can enter the per unit
amount as the budget item amount. Then select the Budget Multiplier check box and select a field
that represents units (options include FA units taken, units anticipated, units in progress, and
current units).
The budget multiplier can also reduce the budget item amount for students who are not taking a
full load or who receive a refund. Because these field values are a percentage, they can reduce
the budget item amount. For example, to adjust a books budget item based on the student's
course load, you select the Budget Multiplier check box and select COURSE_LD_PCT as the
multiplier. Full time students would receive 100 percent of the budget item amount, three-quartertime students would receive 75, and so on.
Pell Annual Amount
Available only for budget categories assigned to a Pell category on the Create Budget Categories
page. Enter the annualnot termPell budget for this item. .
The budget multiplier does not affect the Pell annual amount..
Pell Less Half Annual Amount
Available only for budget categories assigned to a Pell category on the Create Budget Categories
page. Enter the annualnot termPell budget for this item. Displays the Pell amount for less
than half-time enrollment.
Copy Setup Data
Click to access the Copy Budget Item Data page and copy the information on this page from one
combination of academic institution, aid year, and budget item category to another.
STEP
22
Navigation: Set Up SACR, Product Related, Financial Aid, Budgets, Budget Formulas,
Budget Formula Groups
Inst COA (institutional cost of attendance)
Displays the sum of all budget items assigned to this budget group that have an item class of
Federal or Institutional. The Packaging routine uses this COA during awarding if you designate
institutional methodology as the packaging methodology at the financial aid item type level.
Fed COA (federal cost of attendance)
Displays the sum of all budget items assigned to this budget group that have an item class of
Federal. The Packaging routine uses this COA during awarding if you designate federal
methodology as the packaging methodology at the financial aid item type level.
Pell COA (Pell cost of attendance)
Displays the sum of all Pell amounts from the budget items assigned to this budget group. The
Packaging routine uses this COA when awarding Pell Grants.
Pell LTHT (Pell less than half-time)
Displays the sum of all Pell amounts from the budget items assigned to this budget group. The
Packaging routine uses this COA when awarding Pell Grants for students enrolled less than halftime.
Category and Item Code
Select the budget category and item code to assign to this group.
Amount
Displays the appropriate budget item amount. You can override this amount for this budget group
only. This is a per term amount.
Pell Amount
Displays the appropriate budget item amount for the Pell budget. You can override this amount
for this budget group only. This is an annual amount.
LHT Pell Amount (less than half-time Pell amount)
Displays the less than half-time Pell amount.
Currency
Displays the correct currency type for the Amount and Pell Amount fields. You can change the
currency.
Item Class
Indicates whether the budget category contributes to the federal and institutional COA or
contributes only to the institutional COA.
STEP
BUDGET FORMULAS
Overview
23
Navigation: Set Up SACR, Product Related, Financial Aid, Budgets, Budget Formulas
Formula Detail
Budget Item Code
Select the budget item for which you are defining a formula.
Budget Multiplier
Selected if you selected it on the Create Budget Items page. The
multiplier field that you selected also appears.
Copy Setup Data
Click to access the Copy Budget Formula Data page and copy setup
data from the Budget Formula page from one academic institution, aid year, and budget category
combination to another.
Note. If you select STDNT_GROUP as the field name, use the Budget Formula Groups page to
specify field values and operations for the STDNT_GROUP criteria.
Formula Definition
Create a budget formula to define a students eligibility for this item. For example, if the student
must be an undergraduate, the field name would be ACAD_CAREER, the operation would be =
(equals), and the field value would be UGRD.
Field Name
A set of predefined fields that enable you to compose selection criteria to assign
budget items. The Values for Field Name subtopic lists the available values.
Operation Indicates the relationship between the field name and its field value used to select
students. The Available Operations subtopic describes the functions of the available values.
Field Value
Select a field value that indicates the required value of the field from Field Name.
The system displays only field values related to the selected field name.
AND/OR
Select an AND/OR connector to indicate that other field names, statements, or
criteria must be included in this formula. For example, a student must be an undergraduate AND
have full time enrollment for a book allowance; the graduate student must be a graduate AND be
enrolled in Fall OR Spring terms to be eligible for a study trip allowance. If you create conditional
statements, the system only processes simple OR statements. Each conditional statement must
be mutually exclusive.
Note. Do not select an AND/OR connector in the last row of your formula.
Designate the student groups applicable to the formula in progress. For example, you can have
special awarding considerations for your student athletes who are also honor students.
**Use this page only if you indicate the field name STDNT_GROUP within the Formula Definition
group box on the Budget Formula page.
Operation Enter the relationship between the student group and its value.
Field Value
Enter the value for the student group.
AND/OR Select an AND/OR connector to include more than one student group in the criteria
statement. For example, the student must be an athlete AND an honor student. Do not select an
AND/OR connector in the last row of your formula.
STEP
24
Navigation: Set Up SACR, Product Related, Financial Aid, Budgets, Application Source
Rank
The system displays the academic institution, aid year, and source rank type.
Status
Award Period
Source Ranking
Rank your preference for source data. The system selects the lowest
number first, and if that application does not exist for the student, the
system searches for the next ranked item.
STEP
25
Navigation: Set Up SACR, Product Related, Financial Aid, Budgets, Budget Assignment
If you have not set up generic budget groups to use with background processing, you must list
each budget category individually. During background budget assignment, the system assigns
the appropriate budget item and amount to each student using the budget formulas or trees that
you set up for each budget item.
Setup up Budget assignments for fall spring and summer
Bdgt Group
Category
Error Type
If you have established generic budget groups for batch budget processing, enter
the budget group code. The page automatically displays the budget categories
that you assigned to this budget group.
Enter the budget category to assign to the selected terms budget. Make sure
that the category is valid for the selected term. For example, a summer term
might not include housing costs, while a fall term includes housing costs.
Select the action to take when the system encounters an error in assigning a
value to a student for this budget category. Options are:
None: The system does not take any action when it encounters an error.
Skip: The system skips the record for which it encountered the error and does
not assign a value to that record.
Stop: The system stops all processing when it encounters an error.
Warning: The system warns you of the error but continues processing. No budget
item is assigned to the student for the budget category for which the system
encountered the error. The student receives a zero dollar amount for that budget
category and a warning that the student failed the budget assignment criteria for
that budget category.
For example, you might assign the child care budget category a Skip error type,
because not all students are parents and, therefore, would not be eligible for a
dependent child care allowance. You might assign the fees budget category a
Stop type because all students need to have a particular fee amount in their
budgets. You might assign a Warning for the books budget category based on
the student's career. If the career does not match the book criteria defined in the
budget assignment setup, the system does not assign a book budget item and
displays a warning. You can then reevaluate the assignment criteria to ensure
correct definition.
Processing Rule
Select whether a formula, tree, or other assigned possibilitiessuch as
tuition calculationsdetermine the amount assigned to the student for
this budget category. Options are:
Formula: The system uses a budget formula to determine the budget
item amount assigned to the student.
Tree: The system uses a budget tree to determine the budget item
amount assigned to the student. When you select this option, a Name
field appears and displays the name of the tree used to define the budget
category.
Tuition: The system calculates the student's tuition budget item amount
by running the tuition calculation routine. The tuition calculation routine
can be run either by Student Financials or Financial Aid; the Use
Actual/Projected Tuition check box on the Create Budget Run Controls
page specifies which tuition calculation routine to use.
Description
You can edit the default description to specify how the rule is used. This can be
different from the description on the Create Budget Categories page. For
example, the book budget category might have a description of Books on the
Create Budget Categories page, but be listed as Book Allowance Fall 2002 on
this page.
Comments
The default value is the budget category description, but you can edit the
description to provide more information about the processing of this budget
category.
Use the top set of scroll arrows to view rows with different effective dates. Use the middle set of
scroll arrows to view different terms. Use the bottom set of scroll arrows to view additional budget
categories for a specific term and budget group combination.
STEP
26
Create aggregate aid limits for annual and aggregate aid limits
to meet your business processing rules.
Created/Revised 11/7/06
Date
Revised N/A
Version
V8.9
Shared Table
Navigation: Set Up SACR, Product Related, Financial Aid, Awards, Aggregate Aid
Limits
Warning! Since financial aid item type information is shared across the VCCS database,
you must use the same aggregate area for all financial aid item types for the same type
of aid. For example, if you have separate subsidized Stafford financial aid item types for
graduates and undergraduates, both subsidized Stafford financial aid item types must
point to the same subsidized Stafford aggregate area. You have the option to associate
an aggregate area to one or many financial aid item types. If you have multiple
institutions, coordinate aggregate areas and aid types to ensure aid limits are calculated
correctly for students who may be receiving aid from multiple institutions.
You must define a single aggregate area for each distinct type of federal aidStafford
subsidized loan, Stafford unsubsidized loan, Perkins Loan, SEOG, and Pell Grant.
Pell Aggregate
Aggregate Program If this aggregate area belongs to the federal Stafford program
select the appropriate aggregate program. Aggregate program limits link aggregate
areas together to enable you to combine limits between subsidized and unsubsidized
Stafford loan aggregate area limits.
Source
Select the funding source. You can select Federal, Institutnl
(institutional), Other, Private, or State. The value you enter here must match the source
of the financial aid item type. If it does not, you cannot associated this aggregate area
with the financial aid item type, because the aggregate area does not appear as an
option in the Aggregate Area field on the FA Item Type 1 page.
Federal ID
This field is available only if you select Federal as the Source. Select the
value that identifies the type of federal aid the aggregate area tracks. Options are: HEAL
(Health Education Assistance Loan), HPSL (Health Profession Student Loan), LDS,
Nursing Ln (nursing loan), PCL (Primary Care Loan), Pell Grant, Perkins Ln (Perkins
loan), PLUS (Parent Loan for Undergraduate Students), SEOG (Federal Student
Education Opportunity Grant), Subsidized, Unsubsidized, or Work Study.
Financial Aid Type Select the value that identifies the type of financial aid this
aggregate area tracks.
Pell Grant
Select to activate Pell-only processing rules if you are defining a Pell
Grant aggregate area. This check box is only available if you select Grant as the
financial aid type.
Loan Program
Select the type of loan program tracked by the aggregate area. This
field is only available if you select Loan as the financial aid type.
Loan Interest Attribute
Indicates whether the government pays the interest on the
loan. This field is only available if you select Loan as the financial aid type.
Subsidized: The government pays the interest on the loan while the student is in school,
during the six-month grace period, and during any deferment periods.
Unsub (unsubsidized): The government does not pay the interest on the loan.
Undergrad Lifetime (undergraduate lifetime)
Enter the maximum amount of this
type of aggregate aid the student can receive during her undergraduate career. Optional
for many aggregates but should be defined and used in accordance with the
requirements for a particular source of funding. This field is mandatory for the following
federal aggregate areas: Perkins, subsidized Stafford, and unsubsidized Stafford.
Graduate Lifetime Enter the maximum amount of this type of aggregate aid the
student can receive during her graduate career. Optional for many aggregate areas but
should be defined and used in accordance with the requirements for a particular source
of funding. This field is mandatory for the following federal aggregate areas: Perkins,
subsidized Stafford, and unsubsidized Stafford. The Grad Limit Rule determines whether
undergraduate aid counts toward this graduate lifetime amount.
Failure to establish undergraduate and graduate lifetime limits for Perkins, subsidized
Stafford, and unsubsidized Stafford aggregate areas can result in the Packaging routine
awarding more than the lifetime maximum amounts the student is eligible to receive.
Max Terms (maximum terms)
Enter the maximum number of terms that the
student can receive this type of aggregate aid during her lifetime, regardless of career.
Optional for most aggregate areas but should be defined and used in accordance with
the requirements of a particular source of funding. This field is currently not used in
processing.
Grad Limit Rule (graduate limit rule)
Identifies whether the graduate lifetime
amount should be calculated as distinct from or cumulative with the undergraduate
amount.
Cumulative: The student's undergraduate amount of this aggregate aid is counted
towards the graduate limit. For example, you use a cumulative graduate limit rule when a
student is eligible for up to 40,000.00 USD in Perkins loans for both undergraduate and
graduate careers, only 20,000.00 USD of which can be awarded during the
undergraduate career.
If the student received the full 20,000.00 USD during her undergraduate enrollment, she
may not receive more than 20,000.00 USD in her graduate enrollmenttotaling
40,000.00 USD between her undergraduate and graduate enrollments. No student
receives more than 40,000.00 USD during undergraduate and graduate enrollments.
Total graduate amounts on the various aggregate summary pages will reflect
undergraduate accumulations if the aggregate area is defined as cumulative.
Distinct: The undergraduate and graduate limits are tracked separately. For example,
you use a distinct graduate limit rule when a student is eligible for up to 20,000.00 USD
as an undergraduate and up to 40,000.00 USD as a graduate, for a total of 60,000.00
USD.
Aggregate Level
List each aggregate level that has an annual aggregate limit.
Aggregate levels and their accompanying definitions come from the Aggregate Level
Cross-Reference page.
Aggregate levels are not required for aggregate areas if the item type source is not
Federal. Where the item type source is Federal, aggregate levels are required for
aggregate areas that require limitsPell, SEOG, Perkins, subsidized Stafford, and
unsubsidized Stafford. Consequently, you can keep track of a student's aggregate aid in
a non-federal program without establishing aggregate levels.
Aggregate Limit
Enter the maximum amount of aggregate aid that can be awarded
while the student is at the associated academic level within a particular aid year. This
aggregate limit can set the award amount returned by the Packaging process. This field
is optional for most aggregate areas. This field is mandatory for the following federal
aggregate areas: Pell, SEOG, Perkins, subsidized Stafford, and unsubsidized Stafford.
Failure to establish undergraduate and graduate (annual) aggregate limits for Pell,
SEOG, Perkins, subsidized Stafford, and unsubsidized Stafford can result in the
Packaging routine awarding more than the federally mandated maximum annual limit the
student is eligible to receive.
Cumulative Limit Enter the maximum amount of aggregate aid that can be awarded
while the student is at the associated aggregate level. By entering a value here the
system will implore cumulative aggregate level checking. Entering a value will allow
aggregate level limits across aid years. For example, the federal Perkins loan program
sets a limit of $8,000.00 USD for any student who has not completed two academic
years of undergraduate work. In the example of the federal Perkins loan, aggregate
levels U0, U1, U2 all would have a cumulative limit set to $8,000.00 USD and annual
aggregate limits set to $4,000.00 USD.
Max Terms (maximum terms)
This field is not currently used for processing. The
maximum number of terms that the student can receive this type of aggregate aid during
her lifetime, regardless of career.
Multi-Pass Processing mid-year level change
Check this field if you would like to
have awarding and packaging automatically determine increased aid eligibility if multiple
grade levels are present for the student.
STEP
AGGREGATE PROGRAM
Overview
27
Navigation: Set Up SACR, Product Related, Financial Aid, Awards, Aggregate Programs
STEP
28
Navigation: Set up SACR, Product Related, Financial Aid, Awards, Loan Fee Setup
**Since there are CURRENTLY no loan fees, this does not need to be set up.
If fees are assessed by lenders or guarantors then you do need to set this up. It gets tied to the
FA Item Type set up for each loan item type.
Select the value that indicates the purpose of the loan fee. Be sure to
select RRebate if the loan fee is an interest rebate, used for the Direct
Loan interest rebate.
Loan Fee Option
Select the value that indicates how the amount of the loan fee is
determined.
Flat: The loan fee is a flat amount. If you select this value, you must select a Loan Fee Rule and
enter the Loan Fee Amount.
Percentage: The amount of the loan fee is a percentage of the students award amount. If you
select this value, you must indicate the percentage in the Loan Fee Percent field.
Loan Fee Rule
This field is available only if you select Flat in the Loan Fee Option field.
The loan fee rule determines how the Packaging routine distributes the
loan fee amount among disbursements.
All in 1st Disbursement: The entire loan fee amount is subtracted from the first disbursement.
Weighted Across Disbursements: The loan fee amount is split among the disbursements
according to the disbursement split code percentages.
Loan fee options and loan fee rules are delivered with the system as translate values that cannot
be modified in any way. The Packaging routine bases certain calculations on these values and
changing them would have unforeseen consequences.
Loan Fee Percent
This field is available only if you select Percentage in the Loan Fee
Option field. The loan fee amount is this percentage of the total award
amount.
Loan Fee Amount
This field is available only if you select Flat in the Loan Fee Option field.
Enter the total loan fee amount.
STEP
29
Navigation: Set Up SACR, Product Related, Financial Aid, Awards, Financial Aid Item
Types
Specific Student Financials set them up once, and FA sets them up every year.
Click the description of the item type to access the Item Type Detail page and view information
from the item type table including the effective date and minimum and maximum transaction
amounts.
Financial Aid Type
Source
Federal ID
STEP
30
Navigation: Set Up SACR, Product Related, Financial Aid, Awards, Fiscal Item Types,
Assign Fiscal Limits
Budgeted Max to Offer
Budgeted Max to Accept
Highest Max to Offer
The maximum source of funding you can offer for this financial
aid item type.
The maximum source of funding that can be accepted for this
financial aid item type.
The sum of all the highest offer amounts from each student who
received this financial aid item type award. If a student were
initially offered 500.00 USD, then 500.00 USD would be added to
this sum. If the student was later offered 800.00 USD, then
500.00 USD would be subtracted and 800.00 USD would be
added to the sum because it is the highest amount offered to the
student. This amount enables you to know what your maximum
total offer amount is for this financial aid item type.
The sum of all the highest accepted amounts from each student
who received this item type award. This amount enables you to
know what your maximum total accepted amount is for this
financial aid item type.
The sum of the reduced offer amounts from each student for this
financial aid item type. If a student is offered 800.00 USD for this
item type and later the offer is reduced to 600.00 USD, then
200.00 USD is added to the sum. If the award is reduced again
for the student, then the additional reduction amount is added to
the sum.
The sum of the reduced accept amounts from each student for
this financial aid item type.
Enter comments regarding a fund for informational use by your financial aid staff.
STEP
AWARD MESSAGES
Overview
31
Navigation: Set Up SACR, Product Related, Financial Aid, Awards, Award Messages
Code
Enter the four-character code that identifies the award message. This field is
alphanumeric, and you can use less than four characters for the code.
Description Enter the text of the award message. The message in this field is printed on the
students FAN letter.
STEP
32
Create disbursement plans, by aid year, that you offer for each
career at your institution. Disbursement Plans are high level
structural schemes possible within an academic career.
Created/Revised 11/7/06
Date
Revised N/A
Version
V8.9
Plan
Enter a two-character code (alphanumeric) for the disbursement plan. You should
use sequential numeric codes (such as 01, 02, 03) rather than skipping numbers
(02, 01, 03).
Description Enter descriptions that easily distinguish one plan from another for easy
identification.
30 Day Delay Loan Plan
Select to indicate that the associated disbursement plan has a
30-day delay for the first loan disbursement. A first-time freshman receiving a
loan cannot receive the first disbursement for the loan until 30 days into the term.
You need to establish a separate disbursement plan for this instance. Review the
setup for the 30-day rule for your institution on the Financial Aid Defaults page.
STEP
35
Navigation: Set Up SACR, Product Related, Financial Aid, Awards, Disbursement Split
Code
Disbursement split codes put a label to various disbursement schemes that instruct the system
how to divide an award disbursement amount among terms. For example, if your institution has
three terms, you would want one split code to split disbursements equally among the three terms.
You usually have more than one split code per disbursement plan depending on the business
practices of your institution and the needs of your financial aid office. You will define the
distribution percentages to these split codes further in the Disbursement Split Code Formula
setup. You can configure all disbursements on a individual award basis, however, it is better to for
you to define most of the schemes in advance.
Split Code Enter a two-character code for the split code you are defining for this disbursement
plan. You can define the split code with numbers or characters.
Description Enter a description that distinguishes one plan from another for easy identification.
For example, a split code of "Two Semesters" could indicate disbursements should be split in
twoone for fall term and one for spring term.
STEP
36
Navigation: Set Up SACR, Product Related, Financial Aid, Awards, Disbursement Split Cd
Formula
Split code formulas define what percentage of the award should be disbursed for each
disbursement ID for each Disbursement Plan and Split Code combination. Define the split code
formula for each split code you have defined for your institution.
Even Split Option
Choose a value in this field to split the award amount equally among all
terms or equally among all disbursements in a term, instead of manually splitting the award using
percentages. This field affects how disbursement-protected awards are distributed when they are
modified.
(None): Indicates you do not want to use an even split option. You must enter the percentage of
the total award each disbursement ID should receive in the Percentage field. The total of all
percentages entered must equal 100.00. If you select an even split option, you cannot enter any
values in the Percentage fields.
Invalid value: Do not use.
Even across disbs by Term (even across disbursements by term): The Packaging routine
adheres to equal term target amounts and spreads that terms disbursements evenly among all
disbursement IDs in the term. For example, the students award is 3,000.00 USD for three terms
and there are two disbursement IDs per term. The term target amount is 1,000.00 USD for each
term and 500.00 USD for each disbursement ID in the term.
Even among first disb by Term (even among first disbursement by term): The award amount is
distributed evenly among the terms within the disbursement plan. Regardless of the number of
disbursements in the term, the amount is distributed in the first disbursement of each term. For
example, the students award is 3,000.00 USD for three terms and there are two disbursement
IDs per term. The term target amount is 1,000.00 USD for each term and the first disbursement
ID of that term only.
Total Disbursement The sum of the percentages you have entered. Your percentages must
add up to 100% for the entire year.
Percentage
This field is not available if you select an Even Split Option. Select the
percentage of the total award you want to disburse for the given disbursement ID. Your
percentages should match the description of your split codes. For example, for a two-semester
disbursement plan, if your split code is set up for a 40/60 split between terms, the percentages for
each semester would be 40% for the fall disbursement ID and 60% for the spring disbursement
ID.
Fall/Spring
STEP
37
Navigation: Set Up SACR, Product Related, Financial Aid, Disbursement, Define Global
Rules
Because these global disbursement rules apply to a particular career, you might want to include
the career as part of the description and short description.
Select the reasons that you want disbursement to be held. The authorization process verifies
each of the items that you select.
Review Complete
Select to require that an institutional review must be completed before
disbursement. The authorization process requires that the Review Status field on the Financial
Aid Status page have a value of Complete.
Package Complete
Select to require that packaging must be completed before
disbursement. The authorization process requires that the Aid Processing Status field on the
Financial Aid Status page have a value of Packaging Completed.
Verification Complete
Select to require that the Department of Education's federal
verification must be completed before disbursement. The authorization process requires that the
Verification Flag field on the Financial Aid Status page have a value of Complete or Not Required.
Post Disb Reduction Control Select to activate post disbursement reduction control, which
causes award reductions that cause authorization failures for current terms to be handled like
those for previous terms if money had been previously disbursed. For example, assume that a
disbursement has been made after which the award is changed for the current term. If this check
box is selected, and authorization of the financial aid item type subsequent to the change fails,
the lesser of the disbursed amount or the awarded amount is authorized for disbursement for the
current term. The lesser of the disbursed amount or awarded amount is authorized for
disbursement in previous terms regardless of whether this box is selected. If you select this check
box, the Post Disb Red Ctrl Census Dt check box becomes unavailable.
The disbursement authorization routine determines current term and prior term using the current
date and term end dates. If the current date is before the term end date, that term is the current
term. If the current date is after the term end date, that term is a prior term.
Post Disb Red Ctrl Census Dt
Select to use the same rules as the Post Disb Reduction
Control check box except only award changes that occur after the census date for the term are
evaluated. The disbursement authorization process uses the same census date as the Financial
Aid Term build process. The Census Date Locking page, reached from the FA Term page,
displays the census date used. If you select this check box, Post Disb Reduction Control
becomes unavailable.
Hold If Withdrawn
Select to require that disbursement is held when a student has
withdrawn from the institution. If a student withdraws, you might want to reduce the student's
financial aid award and manually disburse online. The authorization process searches Financial
Aid Term records for withdrawal information.
Honor Disbursement Hold
Select to require the authorization process to honor any
disbursement hold that has been entered on the Financial Aid Status page if the financial aid item
type matches the disbursement hold type. The types of awards that can be held are Fed Aid
(federal aid), Institut. (institutional), and Loan Hold. Funds are not authorized for disbursement if a
disbursement hold exists.
Must Meet Satisfactory Prog (must meet satisfactory progress)
Select to require that
the Satisfactory Academic Progress field on the Financial Aid Status page have a value of Meets
SAP or Probation.
Hold If No Enrollment Data
Select to require that the student have the current FA Term
record for the award build from enrollment data in Student Recordsnot projection datafor
disbursements to be authorized. The rule verifies whether the FA Term build source is Term. For
example, if you select this check box and the student has never enrolled in any classes for the
term, no funds are disbursed. The same option is available for financial aid item type
disbursement rules. Selecting it here enforces the rule for all students and all of their awards in
the career for which this global disbursement rule applies. This rule should be used in conjunction
with the Hold if Withdrawn and Minimum Units rules to insure that the student is still enrolled for
the current term.
Match Fees
Select to require that the tuition-related fees on the student's account
match the amount calculated in the student's budget to disburse funds. The fees in the student's
account are based on the financial aid item types that belong to the FA-BUDGET item grouping
(used by the tuition calculation process). This amount is compared to the financial aid budget fees
that belong to the TUIT budget category.
Tolerance Amt (tolerance amount)
This field appears when you select the Match Fees
check box. Enter the largest amount by which the fee and budget item amounts can differ. If the
difference between a fee and a budget item is smaller than or equal to the amount entered in this
field, the disbursement is authorized; otherwise, the disbursement is held.
STEP
38
Navigation: Set Up, Product Related, Financial Aid, Disbursement, Define Item Types
Rules
Indicators
Select the reasons that you want disbursement to be held. The authorization process verifies
each of the items that have been selected.
Official Fed EFC
Select to require that an official Expected Family
Contribution (EFC) must be in the latest ISIR data prior to disbursement.
NSLDS Loan Year Match
Select to require that the loan year information on
the budget term table match the student's NSLDS Loan year on the Financial Aid Term.
Bdgt/Term Level Match (budget/term level match)
Select to require that the student's level
on the budget term table must match the student's level on the Financial Aid Term before a
disbursement can be made.
Loan Entrance Intervw Req (loan entrance interview requirement)
Select to have the
authorization process determine if a student must complete loan entrance counseling for awards
of this item type. The authorization process checks the students NSLDS history for a prior
Stafford, Direct, or Supplemental Loan for Student (SLS) loan. If the system finds a record, it
authorizes the item type for disbursement. If no prior loan history exists, the student is assumed
to be a new borrower, and the Loan Entrance Interview Status field in the Packaging Status
Summary component is checked for the student's current status. When an item type fails
authorization because of the loan entrance counseling requirement, the following messages can
appear: The student is a first time borrower if the current Loan Entrance Interview Status is
blank, or Loan Interview is required to authorize the loan if the current Loan Entrance Interview
Status is Inst Req (Institution Required)
To control how this disbursement rule is carried out, use the Loan Entrance Interview Status field
on the Financial Aid Status page. Setting this field to Complete or Pending Resolution allows the
disbursement to pass this requirement.
You can select this check box only for Direct Loan and FFEL financial aid item types.
Awd Career Match Term Career (award career matches term career) Select to prevent
disbursement if the career used when making the award is not the career that is in Financial Aid
Term data.
Hold Disb Fed Overaward (hold disbursement federal overaward)
Select to prevent
disbursement of this financial aid item type if a federal overaward exists.
Hold Disb Inst Overaward (hold disbursement institutional overaward) Select to prevent
disbursement of this financial aid item type if an institutional overaward exists.
Authorize to Fee Assessment Select to require that the disbursed amount for the financial aid
item type cannot be greater than the balance on the student's account for the term. If selected,
the amount disbursed for the financial aid item type is not greater than the balance on the
student's account.
For this feature to work, you must set up the predelivered item grouping named FA-BUDGET in
Student Financials. Item groupings are set up on the Item Groupings component (Set Up SACR,
Product Related, Student Financials, Item Types, Item Type Group). You must assign the
appropriate item tree and tree nodes that contain the charge item types that you want the rule to
count.
FFELP Tolerance Amt (FFELP tolerance amount)
Enter the acceptable difference between
the authorized amount and the net disbursement amount for the financial aid item type. If the
authorized amount is greater than the net disbursed amount, the system calculates the
difference. If this difference is greater than the FFELP tolerance amount, the system displays an
error during disbursement authorization.
If you leave this field at the default setting (zero), the loan disbursement amount must match the
net disbursement amount from the student's package. Generally, you should set this field to a
large value (such as 1,000.00 USD) if FFELP loan increases are common. The authorization
process never authorizes an amount greater than the amount of any loan check. In addition,
disbursements for loans processed electronically using CommonLine are updated to match the
approved disbursement amounts from the lender if an electronic guarantee is received and
processed by the school.
Review Complete, Package Complete, Verification Complete, Post Disb Reduction Control, Post
Disb Red Ctrl - Census Dt, Hold If Withdrawn, Honor Disbursement Hold, Must Meet Satisfactory
Prog, Hold If No Enrollment Data, Match Fees, and Tolerance Amt
These fields have the
same description as the fields on the Disbursement Rules: Global - Indicators page.
Load Level Rules
Choose whether the three enrollment load-dependent fields in this group box use the default FA
Load enrollment load or the student's current load. Both values can be viewed on the student's
Financial Aid Term record.
Bdgt/Term Load Match (budget/term load match)
Select to require that the academic load
in the budget term table match the student's Financial Aid Term FA Load enrollment load
information. You can also use the current load from the student's Financial Aid Term record.
Disbursement Proration Rule Select a disbursement proration rule if awards of this financial
aid item type should be prorated based upon the student's Financial Aid Term FA Load value.
This rule is used to disburse fractional award amounts to students based on fractional academic
loads. For example, a student who is enrolled three-quarters time would receive only 75 percent
of the scheduled disbursement amount. These rules are set up on the Disbursement Proration
Rules page. You can also use the current load from the student's Financial Aid Term record.
STEP
38
Navigation: Set Up SACR, Product Related, Financial Aid, Disbursement, Create User Edit
Messages
Edit Message Type
Displays the categorized edit message. This field is currently for
statistical purposes only and does not control any processing. Values include Error, Informational,
and Warning.
Edit Message Code
Enter a code, up to six characters long, used to represent this error
message. Enter any code, but consider that it should be meaningful for those who will use the
code, because it appears on the Message Detail page in the authorization and disbursement
components if the financial aid item type fails authorization.
STEP
40
Navigation: Set Up SACR, Product Related, Financial Aid, Disbursement, Create Proration
Rules
** Highly discouraged to use for PELL!!! You could use them for other aid not being disbursed
through PSoft, however youd have to reduce the accepted award to what was actually set in the
proration rule. There is really no point in using this. Budgeted item types may be skewed.
Select an enrollment value to include in the proration rule. Insert additional rows to add all valid
FA Load values for your institution. If a students enrollment does not match any of the values that
you select on this page, the system generates an error message when you run the authorization
process. FA Load values are defined in the PeopleSoft Enterprise Student Records Level/Load
Rules component.
STEP
PACKAGING PLANS
Overview
40
Navigation: Set Up SACR, Product Related, Financial Aid, Awards, Packaging Plan
Processing Order
When the Mass Packaging process has many packaging plans to
evaluate during a run, the processing order determines the sequence in which the selected
packaging plans are reviewed. The Mass Packaging routine processes the packaging plan with
the lowest processing order number first.
Pell Grant specific
Select to designate this packaging plan as a Pell-only repackaging plan.
When selected, you can only enter Pell Grant financial aid item types for the packaging rule (item
type only, no gap or related item group) on the Packaging Rules 1 page.
Award Period Select the award period the packaging plan spans. The packaging plan's award
period is particularly important during multiple award period processing.
Academic: The packaging rules in this packaging plan apply to the academic award period. If
existing awards have disbursement plan/split code combinations that indicate they belong to the
academic award period, the existing awards are reevaluated and may be changed or canceled. If
the disbursement plan/split code combinations indicate the existing awards belong to the nonstandard award period, the existing awards are not reevaluated. If the disbursement plan/split
code combinations indicate the existing awards belong to the both award periods, only the portion
of the existing awards that belong to the academic award period are reevaluated.
Both: The packaging rules in this packaging plan apply to the both award periods. All existing
awards are reevaluated and may be changed or canceled.
Non Std (non-standard): The packaging rules in this packaging plan apply to the non-standard
award period. If existing awards have disbursement plan/split code combinations that indicate
they belong to the non-standard award period, the existing awards are reevaluated and may be
changed or canceled. If the disbursement plan/split code combinations indicate the existing
awards belong to the academic award period, the existing awards are not reevaluated. If the
disbursement plan/split code combinations indicate the existing awards belong to the both award
periods, only the portion of the existing awards that belong to the non-standard award period are
reevaluated.
Description For reference, you may want to include the career that uses this packaging plan in
the description for easy identification.
Selection Criteria
Select an equation that determines which students are selected for
evaluation with this packaging plan during a Mass Packaging run. You set up these equations
with the Equation Engine.
Equation Detail
This field appears only if you enter an equation in the Selection Criteria
field. Click to access the Equation Summary page and view the selected equation written as an
algebraic expression.
Copy
Click to access the Copy Package Plan Data page and copy packaging plan ID
information from one combination of institution, aid year, academic career, packaging plan,
effective date, and processing order to another.
The packaging target is defined either as a percentage of the student's financial need or a
specific dollar amount or both. For example, the target could be to award students up to 75% of
their FM need or up to 12,000.00 USD, or to award 75% of their FM need up to 12,000.00 USD.
When you populate this page, the packaging plan evaluates the student's FM need. The
packaging plan then attempts to award students up to the target amount. You can also establish
award amount limits for this packaging plan that are more restrictive than those defined at the
financial aid item type level.
FM Packaging Target
% of Total Need
Enter the percentage of the students FM need you want this packaging
plan to meet.
Disable Percentage
Select if you want the packaging target to be determined by a maximum
amount only. Clear if you want to use a maximum amount as well as a percentage to determine
the packaging target. If you are not entering a maximum amount, you must clear this check box.
When you combine % of Total Need with Maximum Amount you can indicate, for example, that
the packaging plan is to meet 80% of FM need but only up to a maximum of 5,000.00 USD.
Maximum Amount
Enter the maximum amount of financial aid to be awarded by this
packaging plan.
Select Constant to use a specific, constant dollar amount as the packaging target.
Select Equation to invoke an equation to determine the dollar amount to be used as the FM
packaging target. The available options in this field include all the equations that you have
created using the Equation Engine.
Equation Detail
This link is available once you have selected an equation. Click to view
the Equation Summary page.
FM Packaging Target Limit
Follow Item Type Limits
Select to invoke the financial aid item type limits established on
the FA Item Type 4 page.
Override at Plan Level for
Select to establish award amount limits that differ from those at
the financial aid item type level for financial aid item types in a specific meet need/cost category.
The meet need/cost categories you can choose from in this field are Conditional, Cost Only, No
Effect, and Special Need/Cost.
Maximum Amount
Enter the new packaging plan-specific limit for those financial aid item
types you specified in the Override at Plan Level for field.
Select Constant to use a specific, constant dollar amount as the limit.
Select Equation to use an equation to determine the dollar amount used as the limit. The
available options are all the equations that you have created using the Equation Engine.
Equation Detail
This link is available once you have selected an equation. Click to view
the Equation Summary page.
STEP
42
Navigation: Set Up SACR, Product Related, Financial Aid, Awards, Award Adjustment
Reasons
Create or modify award adjustment reasons. Can be used on a student by student basis.
However, need to test to make sure that the reason doesnt show up on the FAN every time.
STEP
43
Summer:
Spring:
Fall:
STEP
44
Navigation: Set Up SACR, Product Related, Financial Aid, Pell Grants, Pell Payment, Pell
Payment Setup
**** - 5 is the Standard, if you are ready to disburse early, you can change it to -30. But you will
have to go back and change it to -5 after you disburse so that your next term does not go out
early.
Pell ID Reporting
Select to identify an institution. After the Pell ID reporting number is
defined for the institution, any school that you associate with your institution such as an off-site
campus is associated with your main institution.
TG Number
Enter your TG identification number. This number corresponds to your Student
Aid Internet Gateway (SAIG) mailbox and identifies your school as a destination point.
Software Provider ID Enter the ID provided by COD. This is not a required field.
Institution Type
Select from: 5 years, 4 years, Less than 1 yr, Less than 2 yrs, Less than
yrs, Less than 4 yrs
Academic Calendar
This field is not required. You can save the page without having to enter
data. Select from:
Clock Hour: Measures academic progress by clock hours.
Crdt Hr NS (credit hour nonstandard term): Nonstandard academic terms and measures progress
by credit hours or units. Financial Aid does not support this Pell calculation.
Credit Hr w/o Trm (credit hour without term): Does not use terms and measures academic
progress by credit hours. Financial Aid does not support this Pell calculation.
Quarter: Standard term quarters and measures academic progress by quarter hours.
Semester: Standard term semesters and measures academic progress by semester hours.
Trimester: Standard term trimesters and measures academic progress by semester or trimester
hours.
Payment Methodology
This field is not required. You can save the page without having
to enter data. Values are: Formula 1, Formula 2, Formula 3, Formula 4, Formula 5, (none)
Enter Contact Information and check the boxes on 2nd tab as shown below:
record. The disbursement process does not pick up a students disbursement record until the
student has been paid through PeopleSoft Enterprise Student Financials.
Payment Period Start Date Req (payment period start date required) Select to indicate that
the institution is ineligible. You cannot process a disbursement request unless the process date is
equal to or greater than the reported disbursement date.
STEP
PELL ID ATTENDING
Overview
45
Navigation: Set Up SACR, Product Related, Financial Aid, Pell Grants, Pell ID Attending
Assign a Pell ID for individual campuses to maintain separate statistics for each campus.
Individual campuses or schools must use the main institution's Pell ID for reporting Pell
information.
Attended Pell ID
Select the code assigned to the institution by the Department of
Education. This is the attending ID for which the student is enrolled. Origination records are
pulled from each campus for every student.
Description
Enter a description for that site.
Campus
Select the campus that coincides with the ID and description.
Common School ID
Enter the eight-digit number assigned by the Department of Education.
The system uses this identifier in conjunction with the SFA Common School ID. In cases where
the reporting school and attending school are the same, it will be identical.
STEP
46
Navigation: Set Up SACR, Product Related, Financial Aid, Pell Grants, Pell Comment Code
This page defines the Pell Comment Codes from the Department of Education.
Pell Comment Codes Indicates identification number assigned to a specific Pell comment.
Description
Displays an explanation of the Pell comment code.
Severity Level Select one of the following severity levels to indicate the action that you want the
system to take.
0 - Ignore: The system disregards the message.
1 - Action Required: The institution's Pell processor is required to take action to resolve the issue.
Copy Pell Command Code
Click to access the Copy Pell Comment Codes page where you
can copy the setup data from one aid year to another.
STEP
47
Set up your file transfer for each type of file you will transfer in
and out of the system.
Created/Revised 11/7/06
Date
Revised N/A
Version
V8.9
Navigation: VCCS Custom Menu, VCCS General Processes, File Transfer Setup
Custom Setup
*****Setup for every process for the following file types:
ISIR Files
Pell Files
Loan Files
Correction Files
You will not have to make any changes once they are set up.
However, for loans, you will have to look at what the file is being called from the UNIX and
you will have to change it to match the name of this file.
STEP
48
SAP PARAMETERS
Overview
Created/Revised
Date
Version
Navigation: VCCS Custom Menu, VCCS Financial Aid, VCCS SAP Parameters
Click on VC SAP Parms (defaults to VC SAP GPA Table). Developmental and 67% requirements
are on this tab.
Click on VC SAP GPA Table tab. GPA requirement and 150% rule are on this tab.
STEP
49
Navigation: VCCS Custom Menu, VCCS Financial Aid, VCCS CL Output File Dest
STEP
50
Navigation: VCCS Custom Menu, VCCS Financial Aid, VCCS Checklist Items
Setup for MILs
Reference the ISIR comments every year from the DOE so that you can update your checklist
items
STEP
51
Define how your school processes loans for the academic year.
You can define loan processes for each academic career of
your institution.
Created/Revised 11/7/06
Date
Revised N/A
Version
V8.9
Navigation: Set Up SACR, Product Related, Financial Aid, Loans, Define Loan Institutions
FFELP/Direct Participant Select if the loan institution can originate FFELP or direct loans, or
both. Alternative loans are not affected by this setting.
DL Disclosure Print (direct lending disclosure print)
For direct lending.
DL SchCd (direct lending school code) If your institution processes direct loans, enter your
direct lending school code. This field is hidden if your school does not participate in the direct
lending program.
SSN Source (social security number source)
For direct loan and COD processing. Select the
source of the student's Social Security Number, such as from PeopleSoft Enterprise Campus
Community Fundamentals.
COD Full Participant
Select if your institution is a full participant for common origination
and disbursement.
DL Serial MPN Activation (direct loan serial master promissory note activation) Select if the
loan institution that you are defining uses the direct loan serial master promissory note. This field
is hidden if your school does not participate in the direct lending program.
EDE Special School (electronic data express special school)
For direct loans. Select to set an
identification prompt on the origination file. This is for schools approved by the Department of
Education for special consideration for direct loan processing by the Loan Origination Center
(LOC). Usually the default rate for the school must be lower than 10%.
Cntact Nbr (contact number) Enter contact information for each financial aid administrator in
charge of loan processing. Assign a contact number for each entry.
Institution Address
Click to access the Loan Institution Address Information page.
Loan Institution Contact Click to access the Loan Institution Contact Information page and
update the address, mailbox type, and mailbox identification.
Click on the Loan Destination Default Tab. Set up default parameters for loan destination.
The order in which the system chooses the loan destination for the student is as follows: Current
Promissory Note, Current Year Originations, Check Prior Year Originations, Check NSLDS for
Guarantor, Default Destination.
Loan Program Values are: Alternative, Direct, FFELP, Health, Perkins, State, University
Current Prom Note (current promissory note) and Current Year Originations The loan
origination process always performs these steps.
Check Prior Year's Origination and Check NSLDS for Guarantor
Select to have the
system perform these steps.
Default Destination
If nothing results from the first four search methods, the system uses
this default destination. The field allows you to select from the CommonLine 4 loan destination
profile numbers. Selecting the Use CRC Destination (common record commonline destination)
check box allows the selection of CRC loan destination profile numbers.
Use CRC Destination
Select to use CRC destination.
STEP
52
Define the types of loans that your institution uses in the loan
origination processes.
Created/Revised 11/7/06
Date
Revised N/A
Version
V8.9
Navigation: Set Up SACR, Product Related, Financial Aid, Loans, Create Loan Types
When you set up a loan financial aid item type, you include specific conditions for processing the
loan. You must complete the Loan Type Table page to complete the setup.
Processing
Loan Category
Select from: Alt Loan (alternative loan), PLUS, Sub/Unsub
(subsidized/unsubsidized), Subsidized, Unsubsidized
Loan Program Select from: Alternative, Direct, FFELP, Health, Perkins, State, University
For example, to set up Stafford loans processed through CommonLine, you might specify the
loan category as Sub/Unsub and the loan program as FFELP. To set up an alternative loan
program processed through CommonLine, specify the loan category as Alt Loan (alternative
loan), and the loan program as Alternative.
Loan Refund Indicator
Select from:
Borrower: Select to have the borrower of the loan receive any refunds or overage. For example,
the borrower would be a parent or guardian for a PLUS loan.
Student: Select to have the student to receive any refunds from the loan.
You can override this field at the loan application level. Note that additional setup is required in
Student Financials to generate refunds to the proper recipient.
Requirements
The system enforces the selected requirements during loan validation when utilizing the
corresponding loan edit.
Loan References Required
Enter reference information on the Promissory Note Plus and
Promissory Note Alt pages and Loan Origination components (SFA_CRC_ORIG). Enter the
number of references required in the Nbr Ref Rq (number of references required) field.
Loan Cosigner Required
If you select this check box, enter the number of cosigners
required in the Nbr Csg Rq (number cosigners required) field.
Cosigner Required Amount Enter the minimum loan amount that requires a cosigner. Enter
cosigner information on the Promissory Note Plus and Promissory Note Alt pages and Loan
Origination components (SFA_CRC_ORIG). Note that this requirement is enforced by the loan
servicer and not the loan validation process.
Loan Fee Rate Enter the loan fee rate to print on the promissory note for this loan type. Ensure
that the loan fee rate matches the loan fee setup for the item type that you associate with this
loan type.
Loan Item Types
SetID Select a setID and an item type. You can associate multiple item types with the same loan
type. You cannot share item types across multiple loan types. For example, to define FFELP
Stafford loans, enter the subsidized and unsubsidized item types.
The system displays the loan fee, description, loan fee amount, loan fee type, and loan fee
percent for the item type selected. These values are associated with the item type when you set
up the financial aid item type on the Loan Fee Table page.
the prior loan information to derive the new loan's destination. This optional feature can be set up
in the Loan Institution setup page.
Alternative Loan Type Cd (alternative loan type code) The system uses this code to notify loan
agencies about the type of alternative loan. Alternative loan codes are assigned by NCHELP.
NSLDS Loan Type
Select a loan type to translate the NSLDS loan type that is
defined in the NSLDS tables.
The Direct Loan Options tab only for Direct Loans. You do not need to touch this tab
unless you are a direct lending institution.
STEP
53
Navigation: Set Up SACR, Product Related, Financial Aid, Loans, Maintain Loan Transfer
ID
EC Transaction ID (electronic commerce transaction identification)
Select the electronic
commerce transaction identification from the available options.
Loan Action Type
This field is not used for CommonLine.
In/Out
Indicates whether the file is inbound or outbound.
Batch Yr (batch year)
Enter the last digit of the appropriate aid year.
Batch ID
Always enter 4P This is a CommonLine 4 requirement.
FA EDI Source Entity Cd (FA EDI source entity code) Identify the appropriate code for your
institution. For most institutions, the source entity code is FATP.
FA EDI Source Business Unit The system populates this field after you select an EDI source
entity code. The default value should be FABU. This field enables EDI Manager to retrieve and
generate the appropriate file structure.
FA EDI Destination Entity Cd (FA EDI destination entity code) Identify the appropriate code for
the loan destination. For most institutions, the source destination code is LDST.
STEP
54
Navigation: Set Up SACR, Product Related, Financial Aid, Loans, Maintain Action Code
Table
The Loan Action Codes page allows you to view loan action codes and messages and their
descriptions. This is a system definition table used for file processing.
STEP
COMMONLINE 4
Overview
55
Navigation: Set Up SACR, Product Related, Financial Aid, Loans, CommonLine 4, Create
Loan Destinations
Normally, a loan destination includes a lender, a guarantor, and a servicer. CommonLine requires
that you define at a minimum a guarantor for the destination.
Loan Destination Profile
Loan Program Create a loan destination profile for each participant that receives the physical
loan origination files. Select from: Alternative, FFELP, Health, Perkins, State, University
Tolerance
Used for CommonLine 96 loans processing. This field is no longer used for
current loan processing.
Description For a FFELP loan, enter a description that best describes the destination.
Destination Components
Guarantor ID, Lender ID, and Servicer ID
Select any combination of the guarantor, lender,
and servicer, but note that one of them must be the guarantor. This is a CommonLine
requirement. Select the Ovrd (override) check box to save the page without designating all three
components.
After you select an ID and press TAB to move to the next field. The system displays the office of
education code and branch. If you are defining a loan destination for the direct lending loan
program, you should only select a servicer ID.
Ovrd (override)
Select this check box to be able to save the page without having to
designate all three components.
Physical Destination Select the destination to receive the loan application. Values are:
Lender, Servicer, Guarantor
Contact Order
Pre-Guarantee Contact, Pre-Disbursement Contact, and Post Disbursement Contact
Identifies the loan agency that should be contacted based on
the state of the students loan application. Select a guarantor, lender, or servicer. These fields are
for information only and are not used by the loan processes.
Valid Category Process Level
Assign the process level when you originate a loan.
Loan Category
Identify the loan category that the loan destination will process. Values
are: Alt Loan (alternative loan), PLUS, Subsidized, Unsub
Track PN (track promissory note)
Select to indicate how the presence of an application or
promissory note determines the process level. The loan origination process checks for an
application or promissory note in the Promissory Note Alt, Promissory Note Plus, and
CommonLine PNote Stafford pages.components. For example, if you are originating a
combination Stafford loan (subsidized or unsubsidized) and you have received the promissory
note prior to originating the loan, you would select the check box to originate the loan with the
process level of Guarantee Only. However, if you are originating without an application or
promissory note, you can set Print and Guarantee as your process level.
Proc Level (process level)
Select the loan processing level that the loan destination
performs for the corresponding loan category. Select from:
Direct: Select for direct loans.
Guarantee Only: Select to have the service provider guarantee the loans only.
Guarantee and Print Appl: Select to have the service provider guarantee the loan and print and
mail a promissory note to the borrower.
Manual: Select if the borrower wants to use a lender unable to take electronic applications using
CommonLine.
Print and Guarantee: Select to have the service provider print and mail a promissory note to the
borrower and guarantee the resulting loan after receipt of the promissory note.
School Cert request: Select if the loan destination participates in school certification request
processing.
Pre Disbursement Destination and Post Disbursement Destination Designate the loan
agency to receive change transaction records when a loan adjustment occurs before or after the
receipt of loan funds by the school.
When you define a valid loan category and processing level on the Loan Dest Profile page, it
matches those parameters to a default edit profile defined in the Loan Edits Default page and
automatically attaches them to the loan destination. Use this page to add, delete, or adjust the
default values.
The upper portions of this page display profile information from the Loan Dest Profile page.
Equation Name Select an equation name for the edit statement. Edit statements are set up on
the Loan Edits/Messages page.
Loan Requirement Status
DisplaysOptional, Recommended, or Required.
Loan Edit Activated Select to enforce an edit. For example, a loan destination might require a
signed promissory note for all loans before the start of the loan period, but might not require one
after the loan period begins. If you clear this check box, the system does not look for a signed
promissory note in validation.
STEP
56
Navigation: Set Up SACR, Product Related, Financial Aid, Loans, CommonLine 4, Maintain
Loan Edits
This page comes preloaded with updated edit error messages as needed. New loan edits created
with the Equation Engine must be added to this page for the loan validation process to use them.
Use the Equation field to select an Equation Engine equation.
The Loan Orig Edit Errors (loan origination edit errors) page in the Originate Loan component
displays any edit errors encountered during the loan origination process.
STEP
57
Create loan validation edit sets that are used when constructing
loan destination profile records. Loan edit default sets are
logical sets of edits that can be carried out based on aid year,
loan program, loan category and process level. After they are
added to a loan destination, you can further modify the edit sets
to function according to the loan destinations business rules.
Created/Revised 11/7/06
Date
Revised N/A
Version
V8.9
STEP
58
Created/Revised
Date
Version
10/16/06
Revised N/A
V8.9
If you have received anything relating to the ISIR/verification process that we did not
specifically request from a student:
Navigation: Home> Campus Community> Checklists> Person Checklists>
Checklist Management- Person
Enter the ID and click Search. You can change your Search By selection and conduct
an Advanced Search if you do not have the students ID. When the results appear, click
on the ISIR function row for the desired Checklist Code Aid Year.
Click on the Checklist Management 2 tab
After the following row appears, click on the spyglass next to the Item field for a list of
possible options.
Click on the letter code that coincides with your college (to narrow your search). Click
Lookup. The following will result. Click on the desired Checklist Item Code.
After being brought back to this page, change the Status of the Item to Completed and
enter the appropriate date(s) as prompted.
When complete, click Save. You will get a message in the upper right hand corner of
the page letting you know that the information has been Saved.
10/16/06
Revised N/A
V8.9
If you have received a loan document, a special circumstance form, a SAP appeal form,
or any other item that is not related to verification:
Navigation: Home> Financial Aid> View Packaging Status Summary
Click on the Add a New Checklist icon, which will open up a new window.
Enter the code, related to your college, under the Checklist Code and click Lookup. Click
the desired Checklist Code
Click the Add a communication icon, which will open up a new window.
You will be provided with your Search Results. Click on the communication you are
interested in assigning.
The Comm Key will become populated with your communication selection.
Click on SAVE. You will receive a message in the upper right hand corner verifying that
your communication assignment has been SAVED.
Close out of this window completely.
Assigning a Checklist:
Navigation: Home> Financial Aid> View Packaging Status Summary
Click the Add a checklist icon, which will open a new window
Enter the code, related to your college, in the Checklist Code field and click on Lookup.
You will be provided with your Search Results. Click on the desired checklist code.
Your Checklist Code will now be populated with your selection. Change the Status to
Completed and click on the Checklist Management 2 tab.
Change the Status to Completed and click SAVE. You will receive a message in the
upper right hand corner when the action is SAVED.
ADJUSTING AWARDS
Overview
Created/Revised
Date
Version
Once you have determined the new annual amount for the award you wish to change,
populate the fields as shown below.
Since this award is a Custom Split, the following window will automatically open. If it
does not and you want to adjust the split of the award to something other than an even
split, click on the Disbursement link.
Click on Validate
You will receive the following message when the validation is complete.
If you receive the additional message shown here, you will want to investigate how the
award amount was adjusted by the validation process. If you dont agree with how it
was adjusted, do NOT proceed with the below step. Instead, rectify the problem and reaward the student.
Click OK.
Click on Post
You will receive the following message when the posting is complete. Click OK.
Once confirmed and ready to disburse, send Pell Disbursements to COD. Check/adjust
Disbursement Request Offset on the Pell Payment Setup page to ensure that the
number of days prior is acceptable.
Overawards:
Run Overaward Report and resolve any overawards before originating loans and
disbursing any aid
Loans:
Adjust any loans that appeared on the overaward report
Send out loan originations to ECMC after all entrance counseling sessions have ended
and students who did not attend have had their loan canceled.
Revised FANs:
Run new FANs with insert about proration and paying possible balance due
Authorization and Disbursement:
Until disbursement begins to occur in PS for scholarships, disburse Foundation and
Local/Private Scholarships outside of PS and then fake the disbursements in PS
(advising Leon in the Business Office not to post batches)
Run Authorization process for all other item types, other than FSL. FSL item types
should only be run once EFTs have started to arrive for the term.
Fix those that have failed, if applicable, using the VCCS Authorization Failure Report.
Run Disbursement process for all authorized item types after verifying with the Business
Office that we have sufficient funds
Run Disbursement process for Pell only after COD has sent back Disbursement
Acknowledgement and the Business Office has confirmed that we have received the
increase in our authorization in GAPS.
Cleanup of non-enrolled students:
Run a query to capture students with an FA Load of N for the current term to ensure
that their budget for that term has been deleted and their EFC has been adjusted
accordingly. Pell eligible students have already been cleaned up and can be ignored on
this query.
*You can select one or more terms and you can select one or more item types. If you
leave the fields blank, it will run for all. If you want to run for more than one item type or
more than one term, simply insert a row by clicking the Add icon in the appropriate field.
Navigate to the below (Home> VCCS Custom Menu> VCCS Financial Aid> VCCS
Authorization Failure Report) to find the students who failed authorization. You need
to select the Academic Institution, Aid Year, and Term, and have the capability of sorting
the report as desired.
The following report will be produced. You can print this report and follow up with the
various conditions if appropriate.
Once you have resolved all issues relevant on this report, the Authorize Disbursements
process (Step 1) must be run again to capture those adjusted students. Once this has
been completed, you would need to run the VCCS Authorization Failure Report again to
make sure the adjusted students no longer appear on the report. If any further
adjustments are made after viewing the Authorization Failure Report a second time, you
must start over with Step 1 once again. In lieu of this, you can manually authorize any
student you resolve an issue for by navigating to Go, Administer Financial Aid, Package
and Disburse Aid, Use, Disburse Aid and clicking the green check mark next to the item
type you want to authorize. If a student should not have failed authorization but you
cannot fix the issue in PS, you can use the Disburse Aid w/Override navigation located
directly below the above navigation, check the Override Authorization box, and click the
green check mark.
Once satisfied with the VCCS Authorization Failure Report and the students you have
manually authorized, you can then proceed with disbursing aid to Student Financials.
You would only want to disburse aid for item types that you have the funds for. Pell and
Loan Originations and Disbursements must be completed before they can be disbursed
to SF. The system will allow Pell disbursements without the acknowledgment of funds
from COD but the Business Office will not proceed with disbursement unless they have
the authorized funds in their federal allocation to do so, therefore, you must wait until
they have the appropriate funds before disbursing in PS. Federal Stafford Loan funds
must be recorded in the system per student before disbursement can occur in PS.
Enter the appropriate Institution, Aid Year, Term, and Item Type
* Student Financials prefers that we disburse item types to them one by one so this
process would need to be run for each item type separately. All loan item types can be
disbursed together by inserting a row (click the + icon) for each new item type with your
cursor in the item type box.
Click on the Run button
Run the process on the Server to the File and click OK
Check for results on the Process Monitor
**Be sure to go back and run Step 2 for all other financial aid item types you are
interested in disbursing since you most likely ran it the first time for one item type
only.
You can monitor your fund expenditures by fiscal item type as shown below.
Navigation: Setup SACR> Product Related> Financial Aid> Awards> Fiscal Item
Types
Enter the SetID, Aid Year, and Item Type you are interested in and hit enter
You can view how much you have awarded and disbursed here.
AWARDING LOANS
Overview
Created/Revised
Date
Version
V8.9
2 - Check the students aggregate data, whether or not they have a federal
overpayment, and their loan default status
Navigation: Home> Financial Aid> Awards> View NSLDS Loan Data
Click on the NSLDS Additional Information tab to check on the federal overpayment
status.
As you can see on the above 2 panels, the student has not reached their aggregate loan
limit, does not have a loan default, and does not have an outstanding federal
overpayment. Therefore, she is federally eligible for loans.
3 Check how many credits the student is registered for, what their current GPA is, and
what their grade level is
Navigation: Home> VCCS Custom Menu>VCCS Student Records> VCCS Student
Inquiry
5 - Determine the students dependency status and what their class level is
Navigation: Home> Financial Aid> Awards>Award Processing> Assign Awards to
a Student
Click on the Term Summary tab
Ensure that you are looking at the appropriate term when viewing the Dependency
Status and Academic Level. If not, scroll to the correct one.
6 - Determine how much and what type of loan a student is eligible for
Click on the second panel tab Need Summary
The Need Summary panel will show you how much need the student has left to qualify
for a Subsidized Loan. It will also show you how much of the cost of attendance is
unmet so that you do not over-award the student.
In this case, the student is eligible for the full $2625 in a Subsidized Loan and $4000 in
an Unsubsidized Loan, assuming she did not request less on the loan application.
Click on the + icon to insert a new row for your Subsidized Loan.
Populate as follows and click on the + icon again to enter your Unsubsidized Loan.
Note: If you do not know the Item Type numbers, you can click on the spyglass next to
that field for a list of possible values to select from.
Click on Validate
You will receive the following message when the Validation process is complete and the
award amounts were NOT validated. You will need to investigate the Message link that
will be provided to the right of the awards that were affected to find out why the awards
did not validate before posting the awards. Do NOT post the awards if you are not
satisfied with the outcome. Click OK.
If the awards were appropriately validated, you will receive the following message. Click
OK.
Verify that the award amounts still appear as you entered them and then click Post.
You will receive the following message when the posting of the awards is complete.
Click OK.
Created/Revised
Date
Version
Step 1:
Navigation: Main Menu>Financial Aid>Budgets>Assign Budgets>Select Students
Enter the Institution and Aid Year
Click on Run
You will be brought back to the run control page. Click the Process Monitor link.
Check the Run Status of your process, which should hopefully go from Queued to
Initiated to Processing to Success. Click on the Details link next to the Run Status
if you would like further information about the results of your process. After doing so,
clicking on the Message Log and/or View Log/Trace link will provide such details. You
would normally want to do this if the process errored out or if you wanted more specific
information regarding how many students were processed.
Proceed with running Steps 2-4 of the Budget Build Processes in the same manner as
above (process run control is displayed here but not the process monitor results)
Step 2:
Navigation: Assign Budgets>Process Formula
Enter the Institution and Aid Year
Click on Run
Check the Process Monitor for results
Step 3:
Navigation: Assign Budgets>Process Tuition
Enter the Institution and Aid Year
Click on Run
Check the Process Monitor for results
Step 4:
Navigation: Assign Budgets>Move Budget to Students
Enter the Institution and Aid Year
Click on Run
Check the Process Monitor for results
For Step * - you first need to change your budget assign run control for the Aid
Year you are running the budget processes for before actually running this last
step.
Navigation: Setup SACR>Product Related>Financial Aid>Budgets>Budget
Assignment Run Control
Enter the following and hit enter
Click on View All, change all 3 terms as follows, and click on SAVE.
Step 5:
Navigation: Assign Budgets>Move Budget to Students>Maintain Budget Work
Table
Enter the Institution and Aid Year
Click on Run
Check the Process Monitor for results
When this process is completed, you will need to go back and change your run control
setup back to the following for all 3 terms and SAVE.
Navigation: Setup, Budget Assign Run Control
Click on View All, change all 3 terms back to the below, and click SAVE.
Created/Revised
Date
Version
The following will result. Click on the Detail link to view the budget that was built for
each term selected.
View the specific information here. Click OK to return to the main page.
When the budget has been moved, the Move Budget button will grey out.
** You can also alter a budget at the following navigation.
Main Menu>Financial Aid>Budget> Maintain Term Budgets
Created/Revised
Date
Version
Navigation: Main Menu > Financial Aid> Package and Disburse Aid, Use,
Packaging Status Summary
Change the Aid Application Status to Canceled and click on SAVE.
CANCELING AWARDS
Overview
Created/Revised 10/5/06
Revised N/A
Date
V8.9
Version
Navigation: Main Menu, Administer Financial Aid, Package and Disburse Aid, Use,
Award Entry
Step 1: Canceling the award(s)
Once you have determined the award you wish to cancel, populate the fields as shown
below.
The award amount(s) will automatically change to 0 after you enter a C in the Action
field.
Click OK.
Click OK.
Created/Revised
Date
Version
10/16/06
Revised N/A
V8.9
You can scroll to the previous ISIR received by clicking on Previous in List if you
should wish to view the information on a prior ISIR received.
This screen provides you with basic information regarding the ISIR such as when it was
loaded or suspended, if the student was selected for verification, their dependency
status, their admit level, and their EFC. You would want to view the most recent ISIR for
the most up to date information.
Step 2: How to view the ISIR information in detail:
Note: If you know for sure that we have a students ISIR, you can skip Step 1.
Navigation: Home>Financial Aid>Federal Application Data
Enter the students EMPLID or SSN and click Search
You can click on each tab to view the ISIR information. Scrolling down will allow you to
view prior ISIR information but your most recent ISIR data will appear first.
The following panel tab will give you the students EFC.
The following panel is a good screen for determining possible problems with the ISIR
although the MIL process will have already captured this information and communicated
it to the student.
Created/Revised
Date
Version
Aid Processing Status will tell you where a student is at in the process. Applied means
the student has not been packaged yet and is not set to be. No Electronic Application
means the student has not filed the FAFSA yet but has been manually Aid Year
Activated (for a checklist or communication to be assigned or a scholarship to be
awarded). Packaging Completed means that the student has been packaged and their
awards can be viewed by clicking the Financial Aid Awarded link. Ready for Counselor
Review means that there is something unique about the student and a further review
must take place before packaging can occur. Ready for Packaging means the student
is set to be packaged with the next group.
Review Status will tell you if the students review is Complete or Incomplete.
Verification Flag will tell you if ED verification is Complete, Not Required, Pending, or
Required.
Satisfactory Academic Progress will tell you if a students SAP Status is Meets SAP,
Not Meet, Probation, or Undetermined.
Loan Entrance & Exit Interview Status will tell you if it is Complete, Pending or Inst
Req. If it is not determined for the student, it will be blank.
You can also check on the following links:
You can also assign a communication, checklist, or comment from this page by clicking
on the appropriate icon. A new page will open in doing this.
The ISIR Load Date you enter will capture ISIRs you loaded from that date forward. It
will default to todays date. It is recommended that you run this process every time
an ISIR load is completed. A new Checklist Code should be created for each new
aid year.
You will be brought back to your run control page. Click on the Process Monitor link to
check on the status of your process.
When the status becomes Success for the Process Name of VFCKLASN, click on the
Details link.
The first page of your report will provide you with a list of checklist items that were
waived or cancelled by the process. This is for informational purposes only and nothing
further needs to be done with this list.
The second page of the report provides you with information regarding how many
checklists and checklist items were created by the process or already existed prior to the
process being executed. It also summarizes the waived and canceled items from the
first page of this report. This is for informational purposes as well.
Close out this window when you have finished viewing this information.
Scroll to the bottom of the Process Monitor and click on Go back to 1. VCCS-MIL
Checklist Assign.
You will be brought back to your run control page. Click on the Process Monitor link to
check on the status of your process.
When the status becomes Success for the Process Name of VFCKLASS, click on the
Details link.
The first page of the report will provide you with the students who have completed
overall checklists but now have incomplete checklist items. These need to be reviewed
to ensure that they are followed up on by the students if they have already been
awarded.
The remainder of the report provides you with a list of students who have all items
complete and are ready to be setup for packaging on the Packaging Status Summary.
This can either be accomplished manually or with a mass change.
You will be brought back to your run control page. Click on the Process Monitor link to
check on the status of your process.
When the status becomes Success for the Process Name of VFMILINI, click on the
Details link.
This report will indicate how many students were assigned an Initial MIL and how many
were assigned a Follow-up MIL.
Click the Run pushbutton to execute this process and follow the same instructions as
outlined in Step 3 (if desired).
Once all of these steps have been completed, you will need to run your MILs and
Follow-up MILs (if applicable).
See Running MILs in Group
Overview
CONDUCTING A SEARCH/MATCH
This procedure details how to conduct a search/match.
Created/Revised
Date
Version
10/5/06
Revised N/A
V8.9
Explanation
The Search/Match function is used to locate an individuals ID number when the
individuals ID number is unknown and must be performed prior to creating any new
records in the Student Information System. Using the Search/Match will minimize
duplicate or multiple records. Duplicate and multiple records can also be minimized
by following using the preferred search criteria outlined at the end of this document.
When finding a match, investigate and verify as much personally identifiable
information as possible (i.e., birth date, social security number, mailing address,
etc.). Additionally you will want to verify the individuals enrollment/relationship by
using the Student Inquiry 3 Component.
Navigation: Student Admissions > Application Entry > Search/Match
Or
Campus Community > Personal Information > Search/Match
Step 1:
To access the VCCS Standard Search, leave all fields blank and click
Step 2:
Search/Match
Search Result Code: The Search Result Code determines how the system will
display IDs retrieved by the Search/Match and should always be
VXCS_STANDARD.
To set the Search Result Code field to the default value of VXCS_STANDARD,
click on
, select VXCS_STANDARD, and click
.
First Name Search: Enter the individuals first name or first letter(s) of the
individuals first name. Tab out of the field.
Last Name Search: Enter the individuals last name or first letter(s) of the
individuals last name. If the individual has a hyphenated last name it is not
necessary to enter the hyphen. Tab out of the field.
Date of Birth: Enter the individuals complete date of birth if known. The correct
format for the birth date is MM/DD/YY. For all years prior to 1950 you must enter
the full year. Tab out of the field.
National ID: Enter the individuals social security number or assigned dummy
number. Tab out of the field.
Middle Name: Enter the individuals middle name or initial. Tab out of the field.
Note: It is necessary to tab out of the Search/Match Data field(s). Tabbing out of
these fields causes the Search button to be activated.
Step 3:
Click Search.
The word Processing will flash on the page.
When the Search is complete, the system transfers you to the Search
Results page.
Search Results
Number of IDs Found: Displays the number of IDs that met the search criteria.
Search Order Number: Indicates the search order number at which results were
found. The lower the number, the more restrictive the search and the greater the
change of having found duplicate IDs.
Click this button to carry the ID to the ID field of the search box on the
pages that you subsequently access so that you do not need to remember the ID.
Enter the entire Social Security Number without hyphens in the National ID
field.
Click
. This is the most restrictive search than can be used and will
return only the individual associated with that Social Security Number.
If a match is not found using the Social Security number, follow the guidelines
in the Preferred Search Criteria 2. Do not stop your search if no match is
found using the Social Security number. The individual may be in the Student
Information System with a different Social Security number, a dummy
assigned number or without a social security number.
Enter the Birth Date (MMDDYY or MMDDYYYY for 1950 and earlier). Do not
enter slashes in the Birth Date.
Enter the First Name and Last Name. The name field is not case-sensitive
and will change all characters to upper case for the search. For First Name
and Last Name, enter all characters for an exact match. Enter partial names
(at least 4 characters) only if unsure about the spelling of the name. Partial
names will yield all students with those characters in their names.
Click
If a match is not found using the Birth Date, First Name and Last Name,
follow the guidelines in the Preferred Search Criteria 3. Do not stop your
search if no match is found using this data. The individual you are
searching for may be in the Student Information System with a different
name or birth date.
Enter the First Name and Last Name. The name field is not case-sensitive
and will change all characters to upper case for the search. For First Name
and Last Name, enter all characters for an exact match. Enter partial names
(at least 4 characters) only if unsure about the spelling of the name. Partial
names will yield all students with those characters in their names.
Click
If no match is found using the First Name and Last Name, the individual may
not exist in the Student Information System.
10/5/06
Revised N/A
V8.9
Ensure that the Citizenship Status is Alien Permanent. If not, change it, and click OK.
Check the following 2 boxes and click on the Correct Student Household tab
Overview
Created/Revised
Date
Version
CREATING COMMENTS
This procedure details how to create comments for a
student.
10/16/06
Revised N/A
V8.9
Step 1:
Navigation: Home> Financial Aid> View Packaging Status Summary
Click the Add Comments icon which will open a new window.
Populate the Comment Category and type your Comments. Once completed, click on
SAVE and close out of this new window.
Created/Revised
Date
Version
V8.9
Overview
Overview
Navigation:
Step 1
Step 2
The first setup page will be displayed. Click on VC SAP Parms folder tab
if the following page isnt displayed.
Step 3
Step 4
Step 5
Dev Hrs. Limit (Development Hours Limit). Enter the maximum number
of developmental hours a student is allowed to take. Currently, 29 credit
hours.
Step 6
ESL Hrs. Limit. Enter the maximum number of ESL hours a student is
allowed to take.
Step 7
Step 8
COMA GPA Hours. Enter the minimum number of hours which when
achieved a student must have at least a specific COMA GPA as specified
Step 10
VGAP GPA. Enter the minimum GPA a student must have in order to
receive the VGAP Grant. Currently, this should be set to 2.0, the
requirement for renewal students.
Step 11
Step 12
Step 13
Step 12
Click on the VC SAP GPA Table folder tab to display the following page.
Step 13
Step 14
Plan Hours
ALL eligible academic plans for financial aid need to be setup. This is
set up by aid year.
Click on the + sign to insert rows and the sign to delete rows. Clicking
on the search glass will allow you to select the Academic Plan from a
drop down list.
Step 15
Created/Revised
Date
Version
Step 1:
Navigation: Main Menu> Financial Aid>Financial Aid Term>Create FA Term Driver
Records
Use the your run control
Populate the Academic Institution, the Aid Year, and the Driver Creation Option
* The Driver Creation Option should be Both Updates and Projections through the last
day to add a class for the Spring Semester. After that time, it should be Update Only.
Click OK
Click on the Process Monitor link to check on the status of the process.
Check the Run Status of your process, which should hopefully go from Processing to
Success by clicking the Refresh button. Click on the Details link next to the Run
Status if you would like further information about the results of your process. After
doing so, clicking on the Message Log and/or View Log/Trace link will provide such
details. You would normally want to do this if the process errored out or if you wanted
more specific information regarding how many students were processed.
Scroll down and click on the Go Back to 1. Create FA Term Driver Recs link.
Step 2:
Navigation: Home> Financial Aid>Financial Aid Term>Build FA Term in Batch
Populate the Academic Institution and the Aid Year
Click OK
As with the first step of the process, check the Run Status of your process, which
should hopefully go from Processing to Success by clicking the Refresh button. Click
on the Details link next to the Run Status if you would like further information about the
results of your process. After doing so, clicking on the Message Log and/or View
Log/Trace link will provide such details. You would normally want to do this if the
process errored out or if you wanted more specific information regarding how many
students were processed.
Overview
Created/Revised
Date
Version
10/5/06
Revised N/A
V8.9
When the below page is displayed, select the appropriate Server Name and click
OK.
When you are brought back to your run control page, click on the Process Monitor link.
Note the Run Status of your process, which will hopefully be displayed as Success.
The results of your report should be printed in order to proceed with Step 2. Click on the
printer icon to do so. If there arent any students on the report, you do not need to
proceed with Step 2.
Close out this window entirely when you are finished viewing/printing the report.
Bring back up this page by clicking Return and then click OK.
As you will see, the amount of the Overaward will be listed here and needs to be
resolved.
Follow the steps listed in Adjusting Awards or Canceling Awards to eliminate the
overaward situation.
ISIR CORRECTIONS/VERIFICATION
This procedure details how to make corrections to a
students ISIR and complete the verification process.
Created/Revised 10/5/06
Revised N/A
Date
V8.9
Version
Overview
Step 1:
Navigation: Home>Financial Aid>Federal Application Data>Correct 2005-2006
ISIR records
Navigate as shown above and check the comments tab under the Assumptions/School
Code tab to see what issues need to be resolved.
You may also want to check the Items for Review and Reject Reasons tabs.
Step 2:
Go to first panel tab and insert a row by hitting clicking the + button
Once you add a row, the Effective Date changes to the date you are making the
correction(s), the EFC Status is changed to Unofficial and the Correction Status is
set to Pending.
Once you have completed all of your corrections, change the Correction Status to
Send.
Then you will need to click on the INAS calculator which recalculates the EFC based on
your changes and also saves all changes made.
Click Save.
You may now complete the process by creating outbound files and moving them to the
staging tables to send to CPS. (See ISIR Correction Export
Process)
Step 3:
Navigation: Home> Financial Aid> View Packaging Status Summary
Update the ED Verification Status and Inst Review Status to Complete, the ED
Verification Status Code to Verified (or Tolerance, when applicable), and the Package
Status to Package. Manually evaluate and update SAP status (for now).
You will also need to click on the following:
Need Summary to ensure that the student has a budget and need.
Database Matches to ensure the student meets the eligibility criteria
TERM to ensure that FA term has successfully built
Financial Aid Award to ensure that the student has not already been awarded
*** If no changes were made on a students record when verification was performed,
Step 3 must still be completed so the student will be captured in the next group of mass
packaging.
Click OK.
Step 2:
Navigation: Home> Financial Aid> Awards> Mass Packaging> Assign Plans
Click OK
Check the Process Monitor for results
Click on Details
In-state plan:
Step 3:
Navigation: Home> Financial Aid> Awards> Mass Packaging> Process Mass
Packaging
Simulation should always be selected first so you can determine if there are problems
with the students records or with the packaging equations and/or plans.
Click Run
Click OK.
Check the Process Monitor for your results
Click on Details
Click on View Log/Trace, then Message Log to view results.
View the Results of the students who were packaged in simulation by scrolling through
them individually. Click on Message to see why they werent awarded that particular
item type. Make changes to students records according to error messages (if actually
necessary and if possible)
Step 4:
Navigation: Home> Financial Aid> Awards> Mass Packaging> Process Mass
Packaging
When satisfied with results in simulation, go back and run the final process LIVE.
Click Run
Click OK.
Check the Process Monitor for your results
Click on Details
Click on View Log/Trace, then Message Log to view results.
If you want to find the students you actually packaged after you run the process LIVE,
you can go to the following panel.
Navigation: Home> Financial Aid> Awards> Mass Packaging> View Mass
Packaging Details
View the Results of the students who were packaged in simulation by scrolling through
them individually. Click on Message to see why they werent awarded that particular
item type. Make changes to students records according to error messages (if actually
necessary and if possible)
The ISIR Load Date you enter will capture ISIRs you loaded from that date forward. It
will default to todays date. It is recommended that you run this process every time
an ISIR load is completed. A new Checklist Code should be created for each new
aid year.
Click the Run pushbutton
You will be brought back to your run control page. Click on the Process Monitor link to
check on the status of your process.
When the status becomes Success for the Process Name of VFCKLASN, click on the
Details link.
The first page of your report will provide you with a list of checklist items that were
waived or cancelled by the process. This is for informational purposes only and nothing
further needs to be done with this list.
The second page of the report provides you with information regarding how many
checklists and checklist items were created by the process or already existed prior to the
process being executed. It also summarizes the waived and canceled items from the
first page of this report. This is for informational purposes as well.
Close out this window when you have finished viewing this information.
Scroll to the bottom of the Process Monitor and click on Go back to 1. VCCS-MIL
Checklist Assign.
You will be brought back to your run control page. Click on the Process Monitor link to
check on the status of your process.
When the status becomes Success for the Process Name of VFCKLASS, click on the
Details link.
The first page of the report will provide you with the students who have completed
overall checklists but now have incomplete checklist items. These need to be reviewed
to ensure that they are followed up on by the students if they have already been
awarded.
The remainder of the report provides you with a list of students who have all items
complete and are ready to be setup for packaging on the Packaging Status Summary.
This can either be accomplished manually or with a mass change.
Scroll to the bottom of the Process Monitor and click on Go back to 2. VCCS-MIL
Chcklst Status Upd.
You will be brought back to your run control page. Click on the Process Monitor link to
check on the status of your process.
When the status becomes Success for the Process Name of VFMILINI, click on the
Details link.
This report will indicate how many students were assigned an Initial MIL and how many
were assigned a Follow-up MIL.
Step 4: Follow-up MIL Communication ***No longer done at JTCC effective 04/05
This process assigns follow-up MIL communications. This is determined by your setup,
which is currently set to produce another MIL after 30 days has passed from the Initial
MIL with a maximum of 2 MILs (1 Initial and 1 Follow-up). It can be set up so students
applications are canceled after the maximum number of MILs has been reached but that
will not be the case at JTCC.
Navigation: VCCS Custom Menu> VCCS Financial Aid> 4. VCCS Follow-Up MIL
Communic
Populate the following fields
Click the Run pushbutton to execute this process and follow the same instructions as
outlined in Step 3 (if desired).
Once all of these steps have been completed, you will need to run your MILs and
Follow-up MILs (if applicable).
See Running MILs in Group in the Process Documentation
Checklist Step 2: Setup all of your checklist items, starting with one for the aid year
application checklist and one for your aid year ISIR as shown below.
Navigation: Campus Community > Checklists > Setup Checklists> Checklist Item
Table
*A new application checklist and a new ISIR checklist must be created with each
new aid year. The remainder of the checklist steps below must be completed for
these 2 items with each new year as well.
Continue setting up your checklist items (as shown below) entering the descriptions as
you would like for them to appear on your MILs. These are not aid year specific and can
be used with each new aid year.
Checklist Step 3: Add all of the checklist items you created to the Checklist Function
Item Table
Navigation: Campus Community > Checklists > Setup Checklists > Checklist
Function Item Table
Checklist Step 4: Create a Checklist Table for all of your checklist items
Navigation: Campus Community > Checklists > Setup Checklists > Checklist
Table
*Your aid year application checklist should not have a tracking group and should
include the aid year appropriate ISIR item code, which was setup in Step 2.
*The rest of your checklist items should have the tracking group populated, which
was setup in Step 1.
Checklist Step 5: Setup the Checklist 3C Groups for each of your checklist items
Navigation: Campus Community > Checklists > Setup Checklists > Checklist 3C
Groups
Checklist Step 6: Setup your Checklist Items under the VCCS Custom Menu for use in
the MIL processes according to the ISIR Comment Codes. Items that are not Aid Year
Specific (such as a Social Security Card) should be left unchecked in that column.
Navigation: VCCS Custom Menu > VCCS Financial Aid > VCCS Checklist Items
COMMUNICATIONS
Communication Step 1: Setup the Standard Letter Table for the Initial MIL and the
Follow-up MIL.
Navigation: Campus Community > Communications > Setup Communications >
Standard Letter Table CS
*These setups are not aid year specific and the same ones can be used with each
new aid year.
Communication Step 2: Setup the Communication Context Table for the Initial MIL and
the Follow-up MIL.
Navigation: Campus Community > Communications > Setup Communications >
Communication Context Table
Communication Step 3: Setup the Communication Category Table for the Initial MIL and
the Follow-up MIL.
Navigation: Campus Community > Communications > Setup Communications>
Communication Category Table
Communication Step 4: Setup the Communication 3C Groups for the Initial MIL and the
Follow-up MIL.
Navigation: Campus Community > Communications > Setup Communications>
Communication 3C Groups
Communication Step 5: Setup the Communication Speed Key Table for the Initial MIL
and the Follow-up MIL under the ISIR Administrative Function.
Navigation: Campus Community > Communications > Setup Communications >
Communication Speed Key Table
Communication Step 6: Add the Initial MIL and the Follow-up MIL to your User Defaults
under the ISIR Administrative Function.
Navigation: Setup SACR> User Defaults
You will be able to verify that your TG Number is listed before further checking the file.
Click on Header and Trailer Data to locate the TG Number.
Write down the SSN and EC Queue Instance of each student whose load status is
suspended with a suspend reason of 1-Stud Not Found (Max Match) or 5 Record
Add Level.
Repeat this process for all Queue Instances you have just loaded.
Step 2: You must then find out if the student has a program/plan at JTCC and if so,
what their EMPLID is.
Navigation: Home> Records and Enrollment> Career and Program Information>
Student Program/Plan
Enter the students National ID (SSN) and click Search
If no matching entries are found, then the students ISIR suspended as it should have.
The following will appear if the students ISIR suspended due to multiple EMPLIDs:
As you will see, this student has multiple EMPLIDs. The ISIR load did not know which
EMPLID to load the ISIR to so it suspended it.
You will need to check both EMPLIDs to determine if one belongs to your college.
Click OK on the first one to view the program/plan
If your college is attached to this EMPLID, take note of the EMPLID since you will need it
to go back and manually load the ISIR to it.
Step 3: Go to the Suspense Management panel to manually load the ISIRs, which had
your colleges EMPLIDs.
Navigation: Home> Financial Aid> File Management> ISIR Import> 20XX-20XX
Suspense Management.
Enter the EC Queue Instance and Students Social Security Number, and click Search.
Click Search.
Enter the EMPLID you noted from the previous screen and check the ID Lock box.
Click the Process ISIR button.
After a few moments, you will see that the students ISIR Load Status has changed from
Suspended to Loaded.
You will also note that their admit level has changed from Not Found to
Accepted/Continuing.
Now that the students ISIR has loaded, one of the following will occur:
1) They will be captured in the Checklist Assign Process and sent a Missing
Information Letter indicating the checklist item(s) that will be required prior to
packaging. If the student has not been placed into a curriculum at JTCC as of
yet, they will be notified of this in their MIL.
2) They will be captured for packaging if their ISIR is clean and no checklist items
are required and they have already been placed in a curriculum.
** You must now complete the Reviewing Suspended ISIRs process as well.
If it does not and appears as shown below, proceed with the remaining instructions for
this step.
Delete the Budget Group field and click the icon next to each item code to delete each
row.
You will receive the following message each time you click the icon. Click OK.
When you are finished, the page should look like the following.
Click SAVE.
Populate the below according to which term(s) the student attended or will be attending
Term(s) Enrolled
Academic
Non-standard
Summer Only
Spring/Summer
Fall/Summer
Fall/Spring/Summer
0
5
4
9
3
3
3
3 Should not need to be done
The Need Summary will reflect the EFC based on the number of months selected.
Once populated, hit the file icon to save, and click Transmission and select Now.
Once the transmission is complete, you will receive the below message. Click File and
select Close.
Click on the Activity Log icon to view the files you have received from CPS and/or COD
Step 2: Copying your file to the PROD_IN college share drive to be transferred into
PeopleSoft
Navigation: G:\IAM\Data\0506 Pell Files (or whichever year you are processing)
Right click on your file and select Copy
Navigate to the PROD_IN folder on ut21, right click inside this location, and select
Paste
Right click on the file, select Rename, and rename the file as per your FTP setup in
PeopleSoft (i.e. FAPELLCOD.DAT)
Step 3: Running the File Transfer Process to move your file from the PROD_IN folder to
the UNIX (to be imported into PeopleSoft)
The following setup must be completed prior to running this step.
Navigation: Home > VCCS Custom Menu > VCCS General Processes > Setup >
File Transfer Setup
Click the Process Monitor link to view the status of your process
Click the Refresh pushbutton until the Run Status for this process changes to
Success.
Once the Run Status changes to Success, click on the Details link. If the Run Status
changes to Error, the same process should be followed to determine the cause of the
error.
If the file transfer process (FTP) was successful, the following message will be
displayed. If not, there will be a reason for the process resulting in an error and this
should be detailed.
Step 4: Importing the file from the UNIX into the PS staging area
Navigation: Financial Aid > File Management> COD Full Participant> Import COD
Response Data
Populate as follows and click the Run pushbutton
Click the Process Monitor link to check on the status of the process
Click the Refresh pushbutton until the Run Status of the process changes to Success.
There should be a message displayed that the file was processed successfully
Click OK
Scroll to the bottom of this page and click on the Go back to COD File Inbound link
Step 5: Import the file from the staging area into the database
Navigation: Financial Aid > File Management> Pell Grants> Import Pell Phase-In
Data
Check the Pell Disbursement Acknowledgment box, assuming that is the only file you
are importing. Click the Run pushbutton to execute the process.
Click the Process Monitor link to check on the status of the process
Click the Refresh pushbutton until the Run Status of the process changes to Success.
Below you will find your Queue Instance (which you should record for a later part of this
process) and how many records were processed and/or skipped.
Click Return
Click OK
Scroll to the bottom and click on the Go back to Pell Process In link
You can scroll through each student here. All Action Codes should be A (Accepted). If
you find any other Action Codes, resolution with COD or a revision to the affected
students Pell award on the Award Entry page will be required.
If there is a great deal of students in your batch and you do not want to scroll through
them one by one, you can run a report to find any other Action Codes.
Navigation: Financial Aid >Pell Payments >Origination Reports > Originations by
Action Code
You would need to run separately for each Action Code other than Accepted.
Click on the Run pushbutton
Populate as follows and click OK. Ensure that the Server Name is set to PSNT, which is
required for crystal reports.
Click the Refresh pushbutton until the Run Status of the process changes to Success.
Click the Details link after the Run Status becomes Success.
If there are any students on the below report, follow up with COD. If not, proceed with
running the report for the other Action Codes.
Click on the Activity Log icon and the following will appear
You will see your Origination Acknowledgment here, along with any other files you have
received from CPS and COD.
Step 2: Locating and moving your file to be imported into the UNIX and PeopleSoft
Locate your file (G:\IAM\Data\0506 Pell Files), right click on it, and select Copy
(Note: You will have 2 files only the crpg file needs to be imported into PeopleSoft.
Ignore the crrc file as that is simply a receipt from COD.)
Navigate to the PROD_IN folder on ut21, right click inside this location, and select
Paste
Right click on the file, select Rename, and rename the file as per your FTP setup in
PeopleSoft (i.e. FAPELLCOD.DAT)
Step 3: Running the File Transfer Process to move your file from the PROD_IN folder to
the UNIX (to be imported into PeopleSoft)
The following setup must be completed prior to running this step.
Navigation: Home > VCCS Custom Menu > VCCS General Processes > File
Transfer Setup
Click the Process Monitor link to view the status of your process
Click the Refresh pushbutton until the Run Status for this process changes to
Success.
Once the Run Status changes to Success, click on the Details link. If the Run Status
changes to Error, the same process should be followed to determine the cause of the
error.
If the file transfer process (FTP) was successful, the following message will be
displayed. If not, there will be a reason for the process resulting in an error and this
should be detailed.
Step 4: Importing the file from the UNIX into the PS staging area
Navigation: Financial Aid > File Management> COD Full Participant> Import COD
Response Data
Populate as follows and click the Run pushbutton
Click the Process Monitor link to check on the status of the process
Click the Refresh pushbutton until the Run Status of the process changes to Success.
There should be a message displayed that the file was processed successfully.
Click OK
Scroll to the bottom of this page and click on the Go back to COD File Inbound link
Step 5: Import the file from the staging area into the database
Navigation: Financial Aid > File Management> Pell Grants> Import Pell Phase-In
Data
Check the Pell Origination Acknowledgment box, assuming that is the only file you are
importing. Click the Run pushbutton to execute the process.
Click the Process Monitor link to check on the status of the process
Click the Refresh pushbutton until the Run Status of the process changes to Success.
Below you will find your Queue Instance (which you should record for a later part of this
process) and how many records were processed and/or skipped.
Click Return
Click OK
Scroll to the bottom and click on the Go back to Pell Process In link
You can scroll through each student here. All Action Codes should be either A
(Accepted) or C (Corrected). If you find any Action Codes of R (Rejected) or D
(Duplicate), resolution with COD is required.
If there is a great deal of students in your batch and you do not want to scroll through
them one by one, you can run a report to find any Rejected or Duplicate Action Codes.
Navigation: Financial Aid > Pell Payments > Origination Reports > Originations by
Action Cd
You would need to run this report twice once with the Action Code set to Rejected
and once with the Action Code set to Duplicate.
Click on the Run pushbutton
Populate as follows and click OK. Ensure that the Server Name is set to PSNT, which is
required for crystal reports.
Click the Refresh pushbutton until the Run Status of the process changes to Success.
If there are any students on the below report, follow up with COD. If not, proceed with
running the report a second time for the Duplicate Action Code.
* You can now proceed with sending your disbursement request to COD. See Pell
Step 3 Sending Disbursements.
Overview
Created/Revised
Date
Version
Step 1: Isolating students who did not receive any aid in the mass packaging process
Navigation: Financial Aid, Awards, Mass Packaging, View Mass Packaging Details
Click Search and then click your last group of AYINSTATE.
Scroll through to the first person who did not receive any aid. All such students should
continue below the first person you find. If you have not ready ensured that these
students should not have received any aid, do so now by checking the eligibility/need
panel. These students should have EFCs that are close to or exceed their Cost of
Attendance.
Write down the EMPLIDs of all students who have not received any aid.
Hit the Return to Search pushbutton to return to the Mass Packaging Details list. You
will now need to go through the AYOUTSTATE group for students that were not
awarded any aid. The following will appear.
Follow the same process as done with the AYINSTATE group shown above.
Then click the Add a New Communication icon, which will open up a new window.
Select FIN AID as the Department and make sure the Comm Cmplt box is NOT checked
Hit the File icon to SAVE
After this step is completed for the first student, you can close this window and bring
back up your other open PS panel (Packaging Status Summary) and repeat Steps 2 & 3
for each of the remaining students one at a time.
Step 4: Print your letters after Steps 2 & 3 are completed for all students on your list
Navigation: Campus Community> Communications> Letter Generation
Populate the below as follows. Most of the information should be there already. Be sure
that your ID Selection is All IDs and your Letter Code is the code you created for No
Need Letters.
Hit the second panel tab (Date Parameters) and the following will appear
Populate as follows if not already filled in as such. Make sure to choose the relevant
date range. The From Date should be changed to what the To Date was. The To
Date should be changed to todays date.
Hit the last panel tab (Checklist Parameters) and the following will appear
Hit the File icon to SAVE when all 3 panels are completed.
Click the Run pushbutton to run the process.
Open your No Need Letter in Microsoft Word from where you have it saved.
Click on the Merge to New Document icon
Your letters will appear and need to be printed and mailed. There is no need to save
them when you close out of Microsoft Word.
Overview
The process analyzes students academic data and identifies those students that are not
maintaining satisfactory academic progress with federal, state and institutional policies.
After students are identified as not meeting user specified parameters, the program will
set flags so as to provide an audit trail of exactly where the student was deficient. The
program will also generate various checklists and communications so that appropriate
notices can be sent to students to inform them of where they are deficient. Also, the
program will set the Satisfactory Academic Progress field to the appropriate value on the
Packaging Status summary panel. Reports of the outcome of the condition tests
performed by the program are provided for information and monitoring purposes.
The Common SAP process is designed to run on demand by each institution, by aid
year. Before running the SAP Process, each institution should ensure that any student
on SAP Probation is designated as such (in the Packaging Summary, Satisfactory
Academic Progress flag) in the aid year for which the process is being run. The process
will find students with the calculated (or specified) active FA Term, and analyze data
obtained from the FA Term and Student Career Term utilizing the SAP Process
Parameters as specified by the end user.
The Common SAP Process will analyze students for six different conditions. At the end
of each analysis, the program will post the appropriate results in the Packaging
Variables designated for SAP. The program will also assign the appropriate checklists
and communications for each condition. And finally, the program will set or reset the
Satisfactory Academic Progress field appropriately on the Packaging Status Summary
page.
The Common SAP process will utilize a Run Control specific to Institution and Aid Year.
That Run Control will link to a SAP Parameters panel group for user set parameters.
Before running this process, be sure you have setup the SAP Parameters for your
Institution. See VCCS SAP Parameters document.
Navigation:
Step 1 After selecting Add or Update a Run Control Record, the run control page will be
displayed.
Step 2 Academic Institution The Institution will default from the operator definition
table. The Institution description will be displayed. Clicking the search glass will allow
you to select an Institution from a drop down list.
Step 3 Aid Year The Aid Year will default from the operator definition table. The Aid
Year description will be displayed. Clicking the search glass will allow you to select an
Aid Year from a drop down list.
Step 4 Letter Code Enter the Letter Code for FA SAP failure letter. Clicking the search
glass will allow you to select a Letter Code from a drop down list.
Step 5 Letter Code Development Enter the Letter Code for FA Development Letter.
Clicking the search glass will allow you to select a Letter Code from a drop down list.
Step 6 Term Override To override the current term Click the Term Override check box if
you want to override the default FA Term for the current semester. A Term To Use edit
box will be displayed for you to enter a Term to Use. Enter a term to Use. Clicking the
search glass will allow you to select a Term from a drop down list. Note: This should
only be used to evaluate past terms for a single student.
Step 7 No Database Updates Click the No Database Update check box if you want to
run the process, but not update the database with Checklists and Communications.
Step 8 Probation Only/No Database Updates Click the Probation Only check box if
you want to run the process for students with a current SAP status of Probation. Note:
When selecting Probation Only students, the database is not updated regardless if
the No Database Update check box is checked or not.
Step 9 Include No App Received Click the Include No App Received checkbox if you
want to include students where the Processing Status is No Electronic Application for
the aid year.
Step 10 Students for SAP The SAP process can be run for all FA term activated
students or student emplids can be entered to limit students processed.
Run for All Students
To process all students FA term activated, dont enter any student emplids.
Step 11 Run the SAP Process Run the College SAP process by clicking on the Run
push button. The following page will be displayed.
Step 12 Make sure Server Name=PSUNX, *Type=Web and *Format=PDF. Click the OK
push button to continue.
Step 13 The process can be monitored by clicking the Process Monitor link from the Run
control page.
Step 14 Once the process shows success on the process monitor, click Details. Reports
can be viewed by clicking on View Log/Trace.
Click on vfcolsap_#####.PDF.
This will bring up a Summary/Status Change Report showing the SAP results on the
students.
Scroll down to the Status change report. This will show the results of the SAP process
for those students.
Also, you can click on Trace File in this Report/Find View. This will bring up a detailed
description of how the student(s) failed SAP.
At this point, you can either update the students record manually, or you can run the
process again in Update Mode. You will want to run the process in update mode if you
wish to generate SAP failure letters. Please see the Creating/Assigning SAP
Communications document.
SCHOLARSHIP PACKAGING
This procedure details how to package a student with a
Overview
scholarship.
Created/Revised 10/5/06
Revised N/A
Date
V8.9
Version
Step 1: Ensure that the student is Aid Year Activated
If we have an ISIR on file for a student, they will be aid year activated. If we do not, you
will have to manually aid year activate the student.
Navigation: Home> Financial Aid> Manage Financial Aid Years
The below screenshot demonstrates a student who has been aid year activated for the
Aid Year 2007 since it is pre-filled.
If you do not see the Aid Year you are interested in, simply click the + icon, which will
provide you with a new row to enter it.
Enter the new Aid Year and click on SAVE.
If the fields become filled for the interested term(s), proceed to Step 3. If nothing
happens, the student is NOT in a curriculum for the Aid Year you are interested in and
will need their FA term manually forced as shown below.
Populate the following fields beginning with the first term you would like to build.
Please note that the campus can be found under the VCCS Student Records
Program/Plan panel for the student.
Populate the Financial Aid Load based on the students actual enrollment. Use Full-time
if the student is not enrolled.
Click on FA Term
Populate the Financial Aid Load based on the students actual enrollment. Use Full-time
if the student is not enrolled.
Click Save.
When the budget is built, click on the View All link and once all rows are displayed, you
can view the budget that was built for each term by clicking on the Detail link next to
each term.
When satisfied with the budget, click on the Move Budget button.
Take note of the Package Status of the student before proceeding since you will have to
change it back when you are finished if it is not already at Completed.
Enter the Scholarship by selecting B as the Action, selecting either Foundation or
Local/Private Scholarship as the Item Type, and the amount awarded under Offered.
The Disbursement Plan and Split Code will default to FS (Fall/Spring) and EV (Even).
You will need to Validate and Post Awards before changing this, if it is not an even split.
Click on the Validate pushbutton
Click OK to the following message
To change the split of the award to Fall Only (for example), enter a B in the Action box
and change the Offered/Accepted amount to the new amount. Then Click on the
Disbursement link.
Click the Custom Split box and revise the Offered amounts as desired.
Click OK to the following message. If you receive a different message, do not proceed
with the next step (posting the awards).
Step 5: Resetting the students packaging status if no other aid has been awarded and
the Package Status was not already at Completed before you awarded the scholarship.
Navigation: Home>Financial Aid>View Packaging Status Summary
You will now need to set the Aid Processing Status back to what it was prior to posting
the scholarship in Step 4. If the student has not been awarded any other types of aid,
you will need to reset the status back to either Applied if they have an ISIR on file but
still need other checklist items before they can be awarded or No Electronic Application
if there is no ISIR on file and you had to aid year activate the student yourself. You will
also need to set their Aid Packaging Method back to Not Pkgd. In this way, staff will
not get confused and think the student has already been evaluated for federal and state
funds. If the students Aid Processing Status was at Completed prior to
awarding the scholarship, this step can be skipped.
Click on SAVE
Final Step If you had to manually build FA Term for the student, save a list of the
students you built for future use.
** You will need to monitor these students and if they are eventually placed into an
academic curriculum for the specific term they were awarded a scholarship for, you will
then need to go back and rebuild their FA term the usual way. This would be
accomplished by un-checking all of the override boxes, saving the panel, and then
clicking the Build pushbutton. In doing this, you will see that FA term will build on its
own for the terms involved.
You can add a specific comment here. Click on SAVE when you are finished.
The next panel you navigate to will display the indicator. There will be a red star for a
positive indicator and a red circle with a line through it for a negative indicator.
SUMMER APPLICATIONS
Overview
Overview
Created/Revised
Date
Version
Overview
Created/Revised
Date
Version
Important
Information
Click on the HTML or Excel link (depending on how you want to view your results)
When the following window appears, enter the following fields. The below example is for
Summer 20XX fields.
Step 1 (Verifying Scholarship Status): Ensure that the Scholarship Status is set to
Evaluated. If not, do NOT proceed with this process since this means that their grant
evaluation for summer has not occurred yet.
Step 2 (FA Term): Once a student has registered, verify that FA term for the summer
term has been built.
Step 3 (Budget): Verify that the students budget has been built for the summer term.
Step 4 (EFC): Verify the EFC is correct based on the terms enrolled.
Term(s) Enrolled
Academic
Non-standard
Summer Only
Spring/Summer
Fall/Summer
Fall/Spring/Summer
0
5
4
9
3
3
3
3
SUMMER PACKAGING
Overview
Created/Revised
Date
Version
Important
Information
Step 1 (FA Term): Once a student has registered, manually build FA term for the
summer term, if not already done by the mass process. Verify that the students FA
Load is accurate for all terms enrolled (fall/spring/summer).
Step 2 (Budget): Manually build summer budget, if not already done by the mass
process. Verify that the students budget is accurate for all terms enrolled
(fall/spring/summer).
Step 3 (EFC): Adjust EFC on ISIR data corrections panel to include 3-month summer
EFC. Verify that the budget duration is correct for the academic period as well.
Term(s) Enrolled
Academic
Non-standard
Summer Only
Spring/Summer
Fall/Summer
Fall/Spring/Summer
0
5
4
9
3
3
3
3 Should not need to be done
Step 9 (Completing Service Indicator Checklist Item): Set the Item Status of the
Service Indicator Checklist Item to Completed and SAVE.
Scenario #2:
The following is a screen shot of a student who has applied to JTCC but has not been
placed into a curriculum. This student is not eligible for financial aid.
Scenario #3:
The following is a screen shot of a student who has neither applied to JTCC nor been
placed into a curriculum. This student is not eligible for financial aid.
***Other scenarios may exist but these should be the main three that will be
encountered.
The first panel (FA Term) will provide you the students program, campus info, etc.
Some of this information will be carried over to the remaining 5 panels.
The Build Info link will tell you if the student has been packaged based on the full-time
assumption or based on their actual registration. The following will appear:
The Source will be Program if packaging was based on the full-time assumption for
that term. It will be Term if packaging was based on actual enrollment for the term. It
is important to remember that all students are awarded based on a projected full-time
enrollment (regardless of whether or not they are actual enrolled for less) if they are
packaged prior to the end of the add/drop period for the term. After that time, they are
awarded based on their actual enrollment.
Click the Return link to go back to FA Term
The second (Acad Level) and third (Statistics) panels will provide you with the students
enrollment status and academic level. If the student is not registered, it will default to
full-time until either the student registers or it is adjusted to no units because the student
failed to register.
The fourth panel (Financial Aid Info) provides you with NSLDS loan information
The fifth panel (Records/Term Info) provides you with information on each term.
The sixth panel (Withdrawal Info) provides you with more specific information on a
students withdrawal. This panel will not display any information if your colleges Student
Records area does not utilize the Term Withdrawal function. Therefore, it will not reveal
any withdrawal information.
Click on the Prg/Pln/Dg tab to view the students curriculum. You can see all of the
programs by selecting View All.