You are on page 1of 6

Backup OC EF Protection Relay (Distribution) - Technical Data Check List

Relay Make

REYROLLE

Relay Type

Argus - 7SR11

Relay Complete Part No.

7SR1103-1HA12-1CA0

Software Version

2436H80003R1

Software version Release date

27-Apr-09

Hardware Version

7SR1103-1HA12-1CA0-BB

Hardware Version Release date

27-Apr-09

Date of product First launch

27-Apr-09

No of Years in Service (minimum=2yrs)

17 months

No of times software upgraded after first launch of this harware version

No of units in service in middle east (other than DEWA)

416

MTBF for specific Relay Hardware Version

2 fail out of 2396 units

MTBF for specific Protection communication Module

0 fail out of 2396 units

Factory warranty period offered (min 5years)?

Yes

S.
No.

Function

Parameter

Yes / No

O/C - 50

Does the relay have 3phase DMT O/C (50) with 2 independent
stages?

Yes

O/C - 51

Does the relay have 3phase IDMT O/C (51) ?

Yes

E/F - 50G

Does the relay have DMT E/F elements (50G) with 2 independent
stages?

Yes

E/F - 51G

Does the relay have IDMT E/F elements (51G) ?

Yes

Does the relay have negative sequence DMT O/C with 2


Negative Seq. Over current-46
independent stages?

Yes

Negative Seq. Over current-46 Does the relay have negative sequence IDMT O/C?

Yes

Breaker Fail Protection - 50BF

Does the relay have Breaker Fail Protection with 2 stage timer?

Yes

Analog Inputs

Does the relay have minimum 4 Current elements?

Yes

Analog Inputs

how many measuring inputs does the relay have?

10

Analog Inputs

Does the relay have residual (caculated) 3Io and Measured 3Io?

Yes

11

Analog Inputs

Are the measured and calculated 3Io independent?

Yes

12

Binary Input & Outputs

Does the relay have Programable Binary inputs & Binary Outputs?

Yes

13

CT Supervision

Does the relay have CT Supervision Function?

Yes

Over current

Does the IDMT characteristic comply with IEC 60255-3 or BS 142


section 3.5.2 standards?

Yes

14

DEWA/TPD/PCS

Comments

Also available as a single pole relay.


Depending on version (4 current + 3 Volts)

Page 1 of 6

Backup OC EF Protection Relay (Distribution) - Technical Data Check List

S.
No.

Function

Parameter

Yes / No

DEWA/TPD/PCS

Comments

15

Over current

Does the Relay have selectable normal inverse, very inverse and
extremely inverse characteristics?

Yes

16

Over current

Does the IDMTL Characteristic have a 20xPMS or 30xPMS


characteristic?

No

17

Over current

Is the PMS setting range for OC & EF (I>) IDMTL : 0.1In10In in


steps of 0.01? Define range and increments of 51OC, 51EF

No

18

Over current

Is the TMS setting range for OC & EF (t>) IDMTL Characteristic:


0.012.00, in steps of 0.01? Define range and increments of 51OC,
51EF

19

Over current

Is the high-set setting range for OC & EF (I>> & I>>>): 0.1In20In,
in steps of 0.1? Define range and increments of 50OC-stage1,
50OC-stage2, 50EF-stage-1, 50EF-stage-2

20

Over current

Is the high set delay setting range for OC & EF (t>> & t>>>)
0.0010.00 sec, in steps of 0.01? Define range and increments of
50OC-stage1, 50OC-stage2, 50EF-stage-1, 50EF-stage-2

21

Over current

Is the highest OCEF maximum operating time <30mS at 2x setting?

22

Over current

What is the maximum high set operating time at 5 x Setting?

23

Over current

Is the dropout ratio >95% for over current?

Yes

24

Over current

Is dropout ratio >95% for high set over current?

Yes

25

Negative Sequence OC

Is the PMS setting range for Negative Sequence OC (I>) IDMT :


0.1In10In in steps of 0.01? Define range and increments

26

Negative Sequence OC

27

Negative Sequence OC

28

Negative Sequence OC

Is the high set delay setting range for Negative Sequence OC (t>> &
t>>>) 0.0010.00 sec, in steps of 0.01? Define range and
increments of 50I2-stage1, 50I2-stage-2

29

High Impedance REF

Is Capable of high impedance REF?

Yes

Depending on model

30

Circuit Breaker Fail

Is Phase current check configurable at least between (0.05-2In)?

Yes

0.05..2

31

Circuit Breaker Fail

Is Phase current check reset time <30ms?

Yes

32

Circuit Breaker Fail

Is Neutral Current check configurable at least between (0.05-2In)?

Yes

0.05 to 2.5 in steps of 0.01

0.00 to 20.00 in steps of 0.01 (all)

Yes

0.00 to 20.00 in steps of 0.01 (all)

No

35mS +/- 10mS


25mS +/- 10mS

0.05, 0.06.2.5

Is the TMS setting range for Negative Sequence OC (t>) IDMTL


Characteristic: 0.012.00, in steps of 0.01? Define range and
increments
Is the high-set setting range for Negative Sequence OC (I>> &
I>>>): 0.1In20In, in steps of 0.1? Define range and increments of
50I2-stage1, 50I2-stage-2

0.025, 0.05.1.6

0.05, 0.064

0..14400mS

0.05..2
Page 2 of 6

Backup OC EF Protection Relay (Distribution) - Technical Data Check List

S.
No.

Function

Parameter

Yes / No

33

Circuit Breaker Fail

Is Neutral current check reset time <30ms?

34

Circuit Breaker Fail

Is drop off to pickup ratio >=95%?

Yes

35

Circuit Breaker Fail

Does the CBF have external initiate capability?

Yes

36

Circuit Breaker Fail

If the protection element initiating CBF resets does the CBF reset
even if the current check elements are measuring current?

Yes

37

Current elements

Is the Over Load Capacity of current element: 100In for 1 sec, 30In
for 10sec, 3In continuous and 250In for 1 cycle?

No

38

Terminal

Are the Current terminals suitable for ring type lug connections?

Yes

39

Data Storage

Does the IED trigger event & disturbance records automatically on


tripping?

Yes

40

Data Storage

Can the disturbance recorder trigger on staters and trip


simultaneously?

Yes

41

Data Storage

Does the relay record the settings together with the disturbance
record?

No

42

Data Storage

Is the time tagging of event & disturbance records 1ms resolution?

Yes

DEWA/TPD/PCS

Comments
<100% I op

1A
5A
1s
100A 350A
1 Cycle 700A 2500A
Continuous 3x In

If fault trigger is set

43

Data Storage

Does the IED store 500 event records?

Yes

1000 events /records

44

Data Storage

Is the length of disturbance recorder 5 sec?

Yes

Upto 10 sec

45

Data Storage

Does the disturbance recorder function have adjustable Waveform


Length, Post fault& pre fault setting?

Yes

46

Data Storage

Does the disturbances & event-logging function record all function


starts, trip, binary input, and outputs with time stamp?

Yes

47

Data Storage

Does the IED record all phase, neutral current angles and
frequency?

Yes

48

Data Storage

Does the event logging function record password entry and setting
changes?

Yes

49

Data Storage

Do the event and disturbance recorders retain all data after


switching OFF the DC supply?

Yes

50

Communication Interface

Is the setting change access level protected with a password?

Yes

51

Communication Interface

Is it possible to change the protection settings from the front panel


keypad?

Yes

52

Communication Interface

Is it possible to read the protection settings from the front display?

Yes

Page 3 of 6

Backup OC EF Protection Relay (Distribution) - Technical Data Check List

S.
No.

Function

Parameter

Yes / No

DEWA/TPD/PCS

Comments

53

Communication Interface

Does the IED have separate password access for Control &
Protection functions?

Yes

54

Communication Interface

Does the IED have at least 4 programmable LEDs?

Yes

55

Communication Interface

Does the IED have configurable labels for each LED?

Yes

56

Communication Interface

Does the IED have device a healthy LED?

Yes

57

Communication Interface

Does the IED have a programmable default display?

Yes

58

Communication Interface

Does the IED display measured values of Ia, Ib, Ic, I1, I2, I neutral in
Secondary Amps or primary Amps

Yes

59

Communication Interface

Does the IED automatically display record number, current in faulty


& healthy phases, neutral current, and date & time, on tripping?

Yes

60

Communication Interface

Is it possible to PC interface for parameterization through Front


panel RS232 /RS485 port/Optical Fibers/RJ45?

61

Binary Input

How many Opto inputs does the offered relay have? (Minimum
Binary Inputs required =3

62

Binary Input

Are the Inputs are Independent? Define How many Inputs are
independent & Combined

63

Binary Input

Is the minimum Binary input Pickup voltage >70V?

64

Binary Input

What is the binary input pickup time?

65

Binary Input

Are Binary inputs provided with adjustable D Bounce time?

66

Binary Output

How many Outputs does the offered relay have? (Minimum Binary
Outputs required =8)

5 or 8 depending on model

67

Binary Output

Are the outputs are Independent? Define How many outputs are
independent & Combined

5 Independent (2 C/O) 3 Combined

68

Binary Output

Is the output Pulse duration settable?

Yes

69

Binary Output

Are the outputs programmable for latch or unlatch?

Yes

70

Binary Output

Are the outputs capable of direct CB tripping?

Yes

71

Binary Output

If static outputs are offered - what is the leakage current?

72

Binary Output

What is the continuous rating per contact @ 70oC

5A

73

Binary Output

What is 1 second rating per contact?

20A for 0.5 second

74

Self monitoring

Does the watchdog monitor the I/O board?

No

75

Self monitoring

Does watchdog operation disable communication?

No

76

Self monitoring

Does the watchdog send a SCADA alarm through the internal SCS
connection?

No

9 LED's

Front USB port plus rear RS485 only

Yes

Min 3 Max 6 depending on model


3 Independent + 3 Combined

Yes
<9mS or <20mS to energise output

Yes

014400mS

Page 4 of 6

Backup OC EF Protection Relay (Distribution) - Technical Data Check List

S.
No.

Function

Parameter

Yes / No

77

Self monitoring

Does the relay watchdog block all protection functions, inputs &
outputs?

No

78

General

Are all protection settings stored in nonvolatile memory?

Yes

79

General

Does the IED have at least 2 setting groups?

Yes

80

General

Can the active setting group be switched through a binary input?

Yes

81

General

Does the IED comply with IEC 60255-11 for AC Ripple voltage?

Yes

82

General

Can the IED withstand an interruption of the DC supply of up to


40ms?

Yes

83

General

Does the relay filter DC components from measured Current?

Yes

84

General

Does the relay filter Transients from measured Current?

Yes

85

General

Does the relay filter non-system frequencies from measured


Current?

Yes

86

Software

Is the relay software included with this offer? If not list the price for
50 users.

Yes

87

Software

Is the software compatible with "Windows7" ?

Yes

88

Insulation test

Does the IED comply with IEC 60255-5 and IEC 60870-2-1 for
insulation test?

Yes

89

Insulation test

Do all AC & DC terminals (except communication terminals)


withstand 2.5kV rms, 50Hz for 1 min?

Yes

90

Insulation test

Can auxiliary voltage and binary input terminals withstand 3.5kV


DC?

Yes

91

EMC test for immunity

Does the IED comply with IEC 60255-22-1 class III for high
frequency test?

Yes

DEWA/TPD/PCS

Comments

4 Setting groups

IEC 60255-5

Page 5 of 6

Backup OC EF Protection Relay (Distribution) - Technical Data Check List

S.
No.

Function

Parameter

Yes / No

Comments

92

EMC test for immunity

Does the IED comply with IEC 60255-22-2 and IEC 61000-4-2 class
IV for electrostatic discharge test?

Yes

IEC 60255-22-2

93

EMC test for immunity

Does the IED comply with IEC 60255-22-4 and IEC 61000-4-5 class
IV for fast transient disturbance?

Yes

IEC 60255-22-4

94

EMC test for immunity

Does the IED comply with IEC 61000-4-8 class IV, IEC 60255-6 for
withstanding the power system frequency magnetic field?

Yes

IEC 60255-6

95

EMC test for noise emission

Does the IED comply with IEC-CISPR 22 - interference field


strength?

Not tested

96

EMC test for noise emission

Does the IED comply with IEC 61000-3-2 - harmonic current?

Not tested

97

EMC test for noise emission

Does the IED comply with IEC 61000-3-3 for Voltage fluctuation and
flicker?

Not tested

98

Vibration and shock stress

Does the IED comply with IEC 60255-21-1 class II, IEC 60068-2-6
for withstanding oscillation?

Yes

IEC 60255-21-1

99

Vibration and shock stress

Does the IED comply with IEC 60255-21-2 class I, IEC 60068-2-27
for withstanding Shock?

Yes

IEC 60255-21-2

100 Vibration and shock stress

Does the IED comply with IEC 60255-21-3 class I, IEC 60068-3-3
for withstanding Semi vibration ?

Yes

IEC 60255-21-3

101 Climatic stress

Does the IED comply with IEC 60255-6 and Permissible permanent
ambient operating temperature upto 60C?

55C

102 Climatic stress

Does the IED operate correctly under relative humidity 95%?

93% humidity

103 Performance

Has the device ever caused a false Trip due to hardware or


software failure?

104 Performance

If Yes to the above how many times?

Programmable LEDs
1
2
3
4

DEWA/TPD/PCS

No

OC Trip
EF Trip
Negative Seq O/C Trip
50BF Trip

Notes:
1. The manufacturer shall provide the above information for DEWA approval process.
2. Non-conformance with the mandatory requirements shall disqualify the relay.
3. All items must be clearly answered.
4. Discrepancies with information provided may lead to disqualification.
5. List of end users with contact details is to be enclosed.
6. Provide reference details of technical manuals for all detailed explanation / clarifications
Page 6 of 6

You might also like