Professional Documents
Culture Documents
com
Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specification
( V ) Final Specification
Module
Model Name
B140XW02 V1 (3A)
Note
Customer
Date
Sony
Checked &
Approved by
Date
B140XW02 V1
Approved by
Date
Bonnie Chen
07/10/2009
Prepared by
Date
Jonken Fan
07/10/2009
1 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Contents
+DQGOLQJ3UHFDXWLRQV
*HQHUDO'HVFULSWLRQ
2.1 General Specification...........................................................................................................................5
2.2 Optical Characteristics.........................................................................................................................6
)XQFWLRQDO%ORFN'LDJUDP
$EVROXWH0D[LPXP5DWLQJV
4.1 Absolute Ratings of TFT LCD Module .............................................................................................12
4.2 Absolute Ratings of Environment......................................................................................................12
(OHFWULFDO&KDUDFWHULVWLFV
5.1 TFT LCD Module..............................................................................................................................13
5.2 Backlight Unit....................................................................................................................................15
6LJQDO,QWHUIDFH&KDUDFWHULVWLF
6.1 Pixel Format Image............................................................................................................................16
6.2 The Input Data Format ......................................................................................................................17
6.3 Integration Interface Requirement ....................................................................................................18
6.4 Interface Timing.................................................................................................................................20
3DQHO5HOLDELOLW\7HVW
7.1 Vibration Test.....................................................................................................................................23
7.2 Shock Test..........................................................................................................................................23
7.3 Reliability Test ...................................................................................................................................23
0HFKDQLFDO&KDUDFWHULVWLFV
8.1 LCM Outline Dimension ...................................................................................................................24
6KLSSLQJDQG3DFNDJH
9.1 Shipping Label Format.......................................................................................................................26
9.2 Carton Package..................................................................................................................................27
9.3 Shipping Package of Palletizing Sequence ........................................................................................27
$SSHQGL[(',''HVFULSWLRQ
B140XW02 V1
2 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electronic breakdown.
B140XW02 V1
4 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
2. General Description
B140XW02 V1 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel,
a driver circuit, and LED backlight system. The screen format is intended to support the 16:9
HD, 1366(H) x768(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight
driving circuit. All input signals are LVDS interface compatible.
B140XW02 V1 is designed for a display unit of notebook style personal computer and
industrial machine.
Items
condition:
Unit
Specifications
Screen Diagonal
[mm]
354, 14.0(13.97)
Active Area
[mm]
309.399 x 173.952
Pixels H x V
Pixel Pitch
0.2265 x 0.2265
Pixel Format
Display Mode
Normally White
[cd/m2]
Luminance Uniformity
Contrast Ratio
500 typ
Response Time
[ms]
8 typ / 16 Max
[Volt]
+3.3 typ.
Power Consumption
[Watt]
Weight
Physical Size
Include bracket
[mm]
Electrical Interface
Glass Thickness
Surface Treatment
B140XW02 V1
Length
Width
Thickness
Min.
319.9
204.6
-
Typ.
320.4
205.1
-
Max.
320.9
205.6
3.6
1 channel LVDS
[mm]
0.5
Glare, Hardness 3H,
Reflection 4.3%
5 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B140XW02 V1
11 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Symbol
Min
Max
Unit
Conditions
Vin
-0.3
+4.0
[Volt]
Note 1,2
Symbol
Min
Max
Unit
o
Conditions
Operating Temperature
TOP
+50
[ C]
Note 4
Operation Humidity
HOP
95
[%RH]
Note 4
Storage Temperature
TST
-20
+60
[ C]
Note 4
Storage Humidity
HST
95
[%RH]
Note 4
Note 1: At Ta (25
Note 2: Permanent damage to the device may occur if exceed maximum values
Note 3: LED specification refer to section 5.2
Note 4: For quality performance, please refer to AUO IIS (Incoming Inspection Standard).
Twb=39C
Operating Range
B140XW02 V1
Storage Range
12 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows;
The power specification are measured under 25
Symble
VDD
PDD
IDD
IRush
VDDrp
Parameter
Logic/LCD Drive
Voltage
VDD Power
IDD Current
Min
Typ
Max
Units
Note
3.0
3.3
3.6
[Volt]
[Watt]
[mA]
Note 1
1
333
Inrush Current
Allowable
Logic/LCD Drive
Ripple Voltage
2000
[mA]
Note 2
100
[mV]
p-p
Note 1
Note 1 : Maximum Measurement Condition Black Pattern at 3.3V driving voltage. (Pmax=V3.3 x I black)
Note 2
Measure Condition
3.3V
90%
10%
0V
0.5ms
13 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Condition
Min
Max
Unit
100
[mV]
-100
[mV]
VID
100
600
Vcm
Differential Input
Common Mode Voltage
1.125
1.375
Vth
Vtl
[mV]
[V]
B140XW02 V1
14 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Symbol
Min
Typ
Max
Units
Condition
PLED
3.5
[Watt]
(Ta=25 ), Note 1
Vin =12V
N/A
12,000
Hour
LED Life-Time
(Ta=25 ), Note 2
I F=20 mA
Note 1: Calculator value for reference PLED = VF (Normal Distribution) * I F (Normal Distribution) / Efficiency
Note 2: The LED life-time define as the estimated time to 50% degradation of initial luminous.
Parameter
Symbol
Min
Typ
Max
Units
VLED
7.0
12.0
21.0
[Volt]
2.5
5.5
[Volt]
0.8
[Volt]
VLED_EN
Define as
2.5
5.5
[Volt]
Connector
Interface
VPWM_EN
Remark
0.8
[Volt]
FPWM
100
20K
Hz
Duty
--
100
(Ta=25 )
15 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B140XW02 V1
16 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Signal Name
R5
R4
R3
R2
R1
R0
Description
Red Data 5 (MSB)
Red Data 4
Red Data 3
Red Data 2
Red Data 1
Red Data 0 (LSB)
Red-pixel Data
Each red pixel's brightness data consists of
these 6 bits pixel data.
Red-pixel Data
G5
G4
G3
G2
G1
G0
Green
Green
Green
Green
Green
Green
Data
Data
Data
Data
Data
Data
5 (MSB)
4
3
2
1
0 (LSB)
B5
B4
B3
B2
B1
B0
Green-pixel Data
Blue Data 5 (MSB)
Blue Data 4
Blue Data 3
Blue Data 2
Blue Data 1
Blue Data 0 (LSB)
RxCLKIN
Blue-pixel Data
Data Clock
DE
Display Timing
VS
HS
Vertical Sync
Horizontal Sync
Green-pixel Data
Each green pixel's brightness data consists of
these 6 bits pixel data.
Blue-pixel Data
Each blue pixel's brightness data consists of
these 6 bits pixel data.
Note: Output signals from any system shall be low or High-impedance state when VDD is off.
B140XW02 V1
17 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Manufacturer
IPEX or compatible
B140XW02 V1
B140XW02 V1
Pin
Signal
NC
VDD
PowerSupply,3.3V(typical)
VDD
PowerSupply,3.3V(typical)
DVDD
DDC 3.3Vpower
NC
No Connection (Reserve)
SCL
DDC Clock
SDA
DDC Data
Rin0-
Rin0+
10
GND
Ground
11
Rin1-
12
Rin1+
13
GND
Ground
14
Rin2-
15
Rin2+
16
GND
Ground
17
ClkIN-
18
ClkIN+
19
GND
20
NC
No Connection (Reserve)
21
NC
No Connection (Reserve)
22
GND
23
NC
Description
No Connection (Reserve)
Ground
Ground
No Connection (Reserve)
18 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
24
NC
No Connection (Reserve)
25
GND
26
NC
No Connection (Reserve)
27
NC
No Connection (Reserve)
28
GND
29
NC
No Connection (Reserve)
30
NC
No Connection (Reserve)
31
VLED_GND
LED Ground
32
VLED_GND
LED Ground
33
VLED_GND
LED Ground
34
NC
No Connection (Reserve)
35
PWM
36
LED_EN
37
NC
38
VLED
39
VLED
40
VLED
GroundShield
GroundShield
6LJQDO3LQ
6LJQDO3LQ
Note1: Input signals shall be low or High-impedance state when VDD is off.
B140XW02 V1
19 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Parameter
Symbol
Min.
Typ.
Max.
Unit
Frame Rate
60
Hz
Clock frequency
1/ T Clock
72
MHz
Period
TV
780
803
1023
Active
T VD
Blanking
T VB
12
35
255
Period
TH
1406
1494
2047
Active
T HD
Blanking
T HB
Vertical
Section
Horizontal
Section
T Line
768
T Clock
1366
40
128
681
TCLOCK
DOTCLK
Input
Data
Invaild
Data
Pixel
1
Pixel
2
Pixel
3
Pixel
N-1
Pixel
N
Invaild
Data
Pixel
1
DE
THB
THD
TH
DE
TVB
TVD
TV
B140XW02 V1
20 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Min.
Typ.
Max.
T1
0.5
10
T2
50
T3
50
T4
400
T5
200
T6
200
T7
10
Units
ms
Note:If T3,T5,T6 couldnt match above specifications, must request T3+T5+T6 > 200ms at least
B140XW02 V1
21 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
LED on/off sequence is as follows. Interface signals are also shown in the chart.
Values
Symbol
Min
Typ
Max
T1
10
---
---
T2
10
---
---
T4
---
---
T5
10
---
---
Unit
ms
B140XW02 V1
22 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
8. Mechanical Characteristics
24 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Note: Prevention IC damage, IC positions not allowed any overlap over these areas.
B140XW02 V1
25 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
Model name
H/W
B140XW02 V1
26 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
www.panelook.com
B140XW02 V1
27 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com