Professional Documents
Culture Documents
MITSUMI
Monolithic IC MM3111
Outline
This IC is an audio power amp that can operate at low voltage. Operating supply voltage supports 3V and 5V
power amp, making it ideal for applications such as mobile phones and other portable communication
devices. It is equipped with the capability to provide continuous supply of 1W (Ave) output against 8 load
from a 5V single power supply with 2% high harmonic distortion (THD+N). MM3111 does not require an
output coupling capacitor, so that applications can be configured with the minimum number of external parts.
It also includes a shutdown function and can operate with low power consumption when a mute signal is
inputted into the SHUTDOWN pin. It also includes a thermal runaway protection function (thermal shutdown)
to allow a gain to be set with an external resistor.
Features
1. Operating supply voltage
2. Operating ambient temperature
3. Current consumption (no-load)
4. Current consumption during Power Save
5. Maximum output power
6. PSRR
7. No output coupling capacitor required
8. SHUTDOWN pin for both Power Save and mute
9. Thermal shutdown function
10. Mounted in a small package
VSOP-8B (0.65 mm pitch)
Package
VSOP-8B
Pin Assignment
VSOP-8B
(TOP VIEW)
1
2
3
4
5
6
7
8
SHUTDOWN
BIAS
IN (+)
IN (-)
OUT (+)
VDD
GND
OUT (-)
Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
Block Diagram
20k
6
VDD
20k
4
IN (-)
0.33F
20k
OUT (+)
20k
8
OUT (-)
IN (+)
BIAS
2
1F
BIAS
7 GND
SHUTDOWN
1
Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.
MITSUMI
Symbol
Ratings
Units
Storage temperature
TaSTG
-65~+150
Input voltage
VIN max.
-0.3~VDD+0.3
Supply voltage
VDD
Allowable loss
Pd
0.34 (alone)
Ratings
Units
Symbol
2.0~5.5
VDD
Supply voltage
1.8=Movement
guarantee
Operating temperature
TOPR
-40~+85
Symbol
Measurement conditions
Current consumption 1
IDD1
VIN=0V, No load
mA
Current consumption 2
IDD2
VIN=0V, RL=8
10
mA
IPS
SHUTDOWN=0V
PO
THD+N=2%
Ripple rejection
PSRR
VOFF
THD+N
THD
0.1
Current consumption 1
IDD1
VIN=0V, No load
3.5
mA
Current consumption 2
IDD2
VIN=0V, RL=8
4.5
mA
IPS
SHUTDOWN=0V
PO
THD+N=1%
Ripple rejection
PSRR
VOFF
THD+N
THD
0.1
Current consumption 1
IDD1
VIN=0V, No load
2.6
mA
IPS
SHUTDOWN=0V
PO
THD+N=1%
0.2
THD+N
THD
0.08
Ripple rejection
PSRR
44
dB
When VDD=5V
0.8
1.0
66
dB
-50
50
mV
%
When VDD=3V
0.28
0.31
62
dB
-50
50
mV
When VDD=2.6V
2
Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.
The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.