You are on page 1of 334

Oracle ASAP Cartridge 2.

0 for AG
Communication Systems GTD-5

AG Communication
Systems GTD-5 Cartridge
Guide
Second Edition
August 2008

Copyright and Trademark Information


Copyright 1992, 2008, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of
their respective owners.
This software and related documentation are provided under a license agreement containing restrictions on use
and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license
agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit,
distribute, exhibit, perform, publish or display any part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you
find any errors, please report them to us in writing.
If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of
the U.S. Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data
delivered to U.S. Government customers are "commercial computer software" or "commercial technical data"
pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As
such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license
terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the
Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License
(December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.
This software is developed for general use in a variety of information management applications. It is not
developed or intended for use in any inherently dangerous applications, including applications which may create
a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take
all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of this software. Oracle
Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous
applications.
This software and documentation may provide access to or information on content, products and services from
third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of
any kind with respect to third party content, products and services. Oracle Corporation and its affiliates will not
be responsible for any loss, costs, or damages incurred due to your access to or use of third party content,
products or services.

Contents
1. Cartridge Overview ...................................................................................... 1
Cartridge content ................................................................................................................... 2
Prerequisites ......................................................................................................................... 2
About this guide .................................................................................................................... 2
Services, features, and options ............................................................................................. 3
Hardware and software requirements ................................................................................... 5
Network element (NE) interface ...................................................................................... 5
ASAP version ................................................................................................................. 6
Connecting to the NE ............................................................................................................ 6
Related documentation ......................................................................................................... 6

2. Installing and Testing the Cartridge ........................................................... 7


Downloading the cartridge .................................................................................................... 7
Starting ASAP ....................................................................................................................... 8
Installing the cartridge ........................................................................................................... 8
Uninstalling the cartridge ....................................................................................................... 9
Testing the cartridge installation ........................................................................................... 9
Configuring loopback and live mode parameters ......................................................... 10
Modifying agcs_gtd5_4008_pots_ne_config.xml .......................................................... 11
Testing the installation .................................................................................................. 13

3. Atomic Service Description Layer (ASDL) Commands .......................... 15


Commercial services service pack ...................................................................................... 17
A_AGCS-GTD5_4008_ADD_ACB ............................................................................... 21
A_AGCS-GTD5_4008_ADD_ACB-CLASS .................................................................. 22
A_AGCS-GTD5_4008_ADD_AR .................................................................................. 22
A_AGCS-GTD5_4008_ADD_ATWC ............................................................................ 23
A_AGCS-GTD5_4008_ADD_BLOCK-PC .................................................................... 24
A_AGCS-GTD5_4008_ADD_BLOCK-TCT .................................................................. 25
A_AGCS-GTD5_4008_ADD_CALL-PICKUP ............................................................... 26
A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL ...................................................... 27
A_AGCS-GTD5_4008_ADD_CALLING-NN ................................................................. 27
A_AGCS-GTD5_4008_ADD_CDGG ............................................................................ 28
A_AGCS-GTD5_4008_ADD_CFF-AC .......................................................................... 29
A_AGCS-GTD5_4008_ADD_CFF-BC .......................................................................... 30
A_AGCS-GTD5_4008_ADD_CFF-GRP-AC ................................................................. 31
A_AGCS-GTD5_4008_ADD_CFF-GRP-BC ................................................................. 32
A_AGCS-GTD5_4008_ADD_CFF-UC ......................................................................... 32
A_AGCS-GTD5_4008_ADD_CFV-AC ......................................................................... 33
A_AGCS-GTD5_4008_ADD_CFV-BC ......................................................................... 35
A_AGCS-GTD5_4008_ADD_CFV-GRP-AC ................................................................ 36
A_AGCS-GTD5_4008_ADD_CFV-GRP-BC ................................................................ 36
A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC ........................................................... 37
A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC ........................................................... 38

AG Communication Systems GTD-5 Cartridge Guide

iii

A_AGCS-GTD5_4008_ADD_CFV-UC ......................................................................... 39
A_AGCS-GTD5_4008_ADD_CH .................................................................................. 40
A_AGCS-GTD5_4008_ADD_COT ............................................................................... 41
A_AGCS-GTD5_4008_ADD_CW ................................................................................. 41
A_AGCS-GTD5_4008_ADD_CWO .............................................................................. 43
A_AGCS-GTD5_4008_ADD_DCW .............................................................................. 44
A_AGCS-GTD5_4008_ADD_DP .................................................................................. 44
A_AGCS-GTD5_4008_ADD_DR .................................................................................. 45
A_AGCS-GTD5_4008_ADD_DS .................................................................................. 46
A_AGCS-GTD5_4008_ADD_DTM ............................................................................... 47
A_AGCS-GTD5_4008_ADD_FLAS .............................................................................. 47
A_AGCS-GTD5_4008_ADD_HCMK ............................................................................ 48
A_AGCS-GTD5_4008_ADD_HGRP ............................................................................ 49
A_AGCS-GTD5_4008_ADD_HGRP-MEM ................................................................... 50
A_AGCS-GTD5_4008_ADD_INFO-DIGIT ................................................................... 52
A_AGCS-GTD5_4008_ADD_LDDA ............................................................................. 53
A_AGCS-GTD5_4008_ADD_LINE ............................................................................... 54
A_AGCS-GTD5_4008_ADD_LNR ................................................................................ 56
A_AGCS-GTD5_4008_ADD_LSM ............................................................................... 57
A_AGCS-GTD5_4008_ADD_MWI ............................................................................... 58
A_AGCS-GTD5_4008_ADD_ORG-DDIAL ................................................................... 59
A_AGCS-GTD5_4008_ADD_PARK ............................................................................. 59
A_AGCS-GTD5_4008_ADD_PERM ............................................................................ 60
A_AGCS-GTD5_4008_ADD_PILOT-LINE ................................................................... 61
A_AGCS-GTD5_4008_ADD_RSU ............................................................................... 62
A_AGCS-GTD5_4008_ADD_SC30 .............................................................................. 62
A_AGCS-GTD5_4008_ADD_SC8 ................................................................................ 63
A_AGCS-GTD5_4008_ADD_SCA ............................................................................... 64
A_AGCS-GTD5_4008_ADD_SCF ................................................................................ 65
A_AGCS-GTD5_4008_ADD_SCR ............................................................................... 66
A_AGCS-GTD5_4008_ADD_SCW .............................................................................. 66
A_AGCS-GTD5_4008_ADD_SET-CCF ....................................................................... 67
A_AGCS-GTD5_4008_ADD_SET-TDP ....................................................................... 69
A_AGCS-GTD5_4008_ADD_SNR ............................................................................... 71
A_AGCS-GTD5_4008_ADD_SR-DR ........................................................................... 71
A_AGCS-GTD5_4008_ADD_SSO ............................................................................... 72
A_AGCS-GTD5_4008_ADD_TDP ................................................................................ 73
A_AGCS-GTD5_4008_ADD_TDS ................................................................................ 74
A_AGCS-GTD5_4008_ADD_TEMP-DC ...................................................................... 75
A_AGCS-GTD5_4008_ADD_TRDP ............................................................................. 75
A_AGCS-GTD5_4008_ADD_TWC ............................................................................... 77
A_AGCS-GTD5_4008_ADD_UACL ............................................................................. 78
A_AGCS-GTD5_4008_ADD_UACN ............................................................................. 79
A_AGCS-GTD5_4008_ADD_UANC ............................................................................. 80
A_AGCS-GTD5_4008_ADD_UCD ............................................................................... 81
A_AGCS-GTD5_4008_ADD_UCR ............................................................................... 81
A_AGCS-GTD5_4008_ADD_URCL ............................................................................. 82
A_AGCS-GTD5_4008_ADD_URCN ............................................................................ 83

iv

Oracle Corporation

A_AGCS-GTD5_4008_ADD_URNC ............................................................................ 84
A_AGCS-GTD5_4008_DEL_ACB ................................................................................ 85
A_AGCS-GTD5_4008_DEL_ACB-CLASS ................................................................... 85
A_AGCS-GTD5_4008_DEL_AR .................................................................................. 86
A_AGCS-GTD5_4008_DEL_ATWC ............................................................................. 87
A_AGCS-GTD5_4008_DEL_BLOCK-PC ..................................................................... 87
A_AGCS-GTD5_4008_DEL_BLOCK-TCT ................................................................... 89
A_AGCS-GTD5_4008_DEL_CALL-PICKUP ................................................................ 90
A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL ....................................................... 90
A_AGCS-GTD5_4008_DEL_CALLING-NN .................................................................. 91
A_AGCS-GTD5_4008_DEL_CDGG ............................................................................. 92
A_AGCS-GTD5_4008_DEL_CFF-AC .......................................................................... 93
A_AGCS-GTD5_4008_DEL_CFF-BC .......................................................................... 93
A_AGCS-GTD5_4008_DEL_CFF-GRP-AC ................................................................. 94
A_AGCS-GTD5_4008_DEL_CFF-GRP-BC ................................................................. 95
A_AGCS-GTD5_4008_DEL_CFF-UC .......................................................................... 95
A_AGCS-GTD5_4008_DEL_CFV-AC .......................................................................... 96
A_AGCS-GTD5_4008_DEL_CFV-BC .......................................................................... 96
A_AGCS-GTD5_4008_DEL_CFV-GRP-AC ................................................................. 97
A_AGCS-GTD5_4008_DEL_CFV-GRP-BC ................................................................. 98
A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC ............................................................ 98
A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC ............................................................ 99
A_AGCS-GTD5_4008_DEL_CFV-UC .......................................................................... 99
A_AGCS-GTD5_4008_DEL_CH ................................................................................ 100
A_AGCS-GTD5_4008_DEL_COT .............................................................................. 101
A_AGCS-GTD5_4008_DEL_CW ............................................................................... 101
A_AGCS-GTD5_4008_DEL_CWO ............................................................................. 102
A_AGCS-GTD5_4008_DEL_DCW ............................................................................. 103
A_AGCS-GTD5_4008_DEL_DP ................................................................................ 103
A_AGCS-GTD5_4008_DEL_DR ................................................................................ 104
A_AGCS-GTD5_4008_DEL_DS ................................................................................ 105
A_AGCS-GTD5_4008_DEL_DTM .............................................................................. 105
A_AGCS-GTD5_4008_DEL_FLAS ............................................................................ 106
A_AGCS-GTD5_4008_DEL_HGRP ........................................................................... 107
A_AGCS-GTD5_4008_DEL_ICID .............................................................................. 107
A_AGCS-GTD5_4008_DEL_LDDA ............................................................................ 108
A_AGCS-GTD5_4008_DEL_LINE ............................................................................. 109
A_AGCS-GTD5_4008_DEL_LNR .............................................................................. 110
A_AGCS-GTD5_4008_DEL_MWI .............................................................................. 111
A_AGCS-GTD5_4008_DEL_ORG-DDIAL ................................................................. 111
A_AGCS-GTD5_4008_DEL_PARK ........................................................................... 112
A_AGCS-GTD5_4008_DEL_SC30 ............................................................................ 113
A_AGCS-GTD5_4008_DEL_SC8 .............................................................................. 114
A_AGCS-GTD5_4008_DEL_SCA .............................................................................. 114
A_AGCS-GTD5_4008_DEL_SCF .............................................................................. 115
A_AGCS-GTD5_4008_DEL_SCR .............................................................................. 116
A_AGCS-GTD5_4008_DEL_SCW ............................................................................. 117
A_AGCS-GTD5_4008_DEL_SET-TDP ...................................................................... 117

AG Communication Systems GTD-5 Cartridge Guide

A_AGCS-GTD5_4008_DEL_SNR .............................................................................. 118


A_AGCS-GTD5_4008_DEL_SR-DR .......................................................................... 119
A_AGCS-GTD5_4008_DEL_SSO .............................................................................. 119
A_AGCS-GTD5_4008_DEL_TDP .............................................................................. 120
A_AGCS-GTD5_4008_DEL_TDS .............................................................................. 121
A_AGCS-GTD5_4008_DEL_TEMP-DC ..................................................................... 122
A_AGCS-GTD5_4008_DEL_TRDP ............................................................................ 122
A_AGCS-GTD5_4008_DEL_TWC ............................................................................. 123
A_AGCS-GTD5_4008_DEL_UCD .............................................................................. 124
A_AGCS-GTD5_4008_DEL_UCR .............................................................................. 124
A_AGCS-GTD5_4008_MOD_CID .............................................................................. 125
A_AGCS-GTD5_4008_MOD_DN ............................................................................... 126
A_AGCS-GTD5_4008_MOD_HG-SIZE ..................................................................... 127
A_AGCS-GTD5_4008_MOD_ICID ............................................................................. 127
A_AGCS-GTD5_4008_MOD_INTERCEPT ................................................................ 128
A_AGCS-GTD5_4008_MOD_SCOS .......................................................................... 129
A_AGCS-GTD5_4008_MOD_SUB-GROUP .............................................................. 129
Understanding user exit type XML files ............................................................................. 130

4. Service Definition ..................................................................................... 143


Common Service Description Layer (CSDL) commands .................................................. 144
C_AGCS-GTD5_4008_ADD_ACB ............................................................................. 148
C_AGCS-GTD5_4008_ADD_ACB-CLASS ................................................................ 149
C_AGCS-GTD5_4008_ADD_AR ................................................................................ 150
C_AGCS-GTD5_4008_ADD_ATWC .......................................................................... 151
C_AGCS-GTD5_4008_ADD_BLOCK-PC .................................................................. 152
C_AGCS-GTD5_4008_ADD_BLOCK-TCT ................................................................ 153
C_AGCS-GTD5_4008_ADD_CALL-PICKUP ............................................................. 154
C_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL .................................................... 155
C_AGCS-GTD5_4008_ADD_CALLING-NN ............................................................... 155
C_AGCS-GTD5_4008_ADD_CDGG .......................................................................... 156
C_AGCS-GTD5_4008_ADD_CFF-AC ....................................................................... 157
C_AGCS-GTD5_4008_ADD_CFF-BC ....................................................................... 158
C_AGCS-GTD5_4008_ADD_CFF-GRP-AC .............................................................. 159
C_AGCS-GTD5_4008_ADD_CFF-GRP-BC .............................................................. 160
C_AGCS-GTD5_4008_ADD_CFF-UC ....................................................................... 161
C_AGCS-GTD5_4008_ADD_CFV-AC ....................................................................... 162
C_AGCS-GTD5_4008_ADD_CFV-BC ....................................................................... 163
C_AGCS-GTD5_4008_ADD_CFV-GRP-AC .............................................................. 164
C_AGCS-GTD5_4008_ADD_CFV-GRP-BC .............................................................. 165
C_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC ......................................................... 166
C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC ......................................................... 166
C_AGCS-GTD5_4008_ADD_CFV-UC ....................................................................... 167
C_AGCS-GTD5_4008_ADD_CH ............................................................................... 169
C_AGCS-GTD5_4008_ADD_COT ............................................................................. 170
C_AGCS-GTD5_4008_ADD_CW ............................................................................... 170
C_AGCS-GTD5_4008_ADD_CWO ............................................................................ 172
C_AGCS-GTD5_4008_ADD_DCW ............................................................................ 173

vi

Oracle Corporation

C_AGCS-GTD5_4008_ADD_DP ................................................................................ 173


C_AGCS-GTD5_4008_ADD_DR ............................................................................... 174
C_AGCS-GTD5_4008_ADD_DS ................................................................................ 175
C_AGCS-GTD5_4008_ADD_DTM ............................................................................. 176
C_AGCS-GTD5_4008_ADD_FLAS ............................................................................ 176
C_AGCS-GTD5_4008_ADD_HCMK .......................................................................... 177
C_AGCS-GTD5_4008_ADD_HGRP .......................................................................... 178
C_AGCS-GTD5_4008_ADD_HGRP-MEM ................................................................. 179
C_AGCS-GTD5_4008_ADD_INFO-DIGIT ................................................................. 181
C_AGCS-GTD5_4008_ADD_LDDA ........................................................................... 182
C_AGCS-GTD5_4008_ADD_LINE ............................................................................. 183
C_AGCS-GTD5_4008_ADD_LNR ............................................................................. 185
C_AGCS-GTD5_4008_ADD_LSM ............................................................................. 186
C_AGCS-GTD5_4008_ADD_MWI ............................................................................. 186
C_AGCS-GTD5_4008_ADD_ORG-DDIAL ................................................................. 188
C_AGCS-GTD5_4008_ADD_PARK ........................................................................... 188
C_AGCS-GTD5_4008_ADD_PERM .......................................................................... 189
C_AGCS-GTD5_4008_ADD_PILOT-LINE ................................................................. 190
C_AGCS-GTD5_4008_ADD_RSU ............................................................................. 191
C_AGCS-GTD5_4008_ADD_SC30 ............................................................................ 191
C_AGCS-GTD5_4008_ADD_SC8 .............................................................................. 192
C_AGCS-GTD5_4008_ADD_SCA ............................................................................. 193
C_AGCS-GTD5_4008_ADD_SCF ............................................................................. 194
C_AGCS-GTD5_4008_ADD_SCR ............................................................................. 195
C_AGCS-GTD5_4008_ADD_SCW ............................................................................ 196
C_AGCS-GTD5_4008_ADD_SET-CCF ..................................................................... 196
C_AGCS-GTD5_4008_ADD_SET-TDP ..................................................................... 198
C_AGCS-GTD5_4008_ADD_SNR ............................................................................. 200
C_AGCS-GTD5_4008_ADD_SR-DR ......................................................................... 200
C_AGCS-GTD5_4008_ADD_SSO ............................................................................. 202
C_AGCS-GTD5_4008_ADD_TDP ............................................................................. 202
C_AGCS-GTD5_4008_ADD_TDS ............................................................................. 203
C_AGCS-GTD5_4008_ADD_TEMP-DC .................................................................... 204
C_AGCS-GTD5_4008_ADD_TRDP ........................................................................... 205
C_AGCS-GTD5_4008_ADD_TWC ............................................................................ 206
C_AGCS-GTD5_4008_ADD_UACL ........................................................................... 207
C_AGCS-GTD5_4008_ADD_UACN .......................................................................... 208
C_AGCS-GTD5_4008_ADD_UANC .......................................................................... 210
C_AGCS-GTD5_4008_ADD_UCD ............................................................................. 211
C_AGCS-GTD5_4008_ADD_UCR ............................................................................. 211
C_AGCS-GTD5_4008_ADD_URCL ........................................................................... 212
C_AGCS-GTD5_4008_ADD_URCN .......................................................................... 213
C_AGCS-GTD5_4008_ADD_URNC .......................................................................... 214
C_AGCS-GTD5_4008_DEL_ACB .............................................................................. 215
C_AGCS-GTD5_4008_DEL_ACB-CLASS ................................................................. 216
C_AGCS-GTD5_4008_DEL_AR ................................................................................ 217
C_AGCS-GTD5_4008_DEL_ATWC ........................................................................... 217
C_AGCS-GTD5_4008_DEL_BLOCK-PC ................................................................... 218

AG Communication Systems GTD-5 Cartridge Guide

vii

C_AGCS-GTD5_4008_DEL_BLOCK-TCT ................................................................. 219


C_AGCS-GTD5_4008_DEL_CALL-PICKUP .............................................................. 220
C_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL ..................................................... 221
C_AGCS-GTD5_4008_DEL_CALLING-NN ............................................................... 222
C_AGCS-GTD5_4008_DEL_CDGG .......................................................................... 223
C_AGCS-GTD5_4008_DEL_CFF-AC ........................................................................ 223
C_AGCS-GTD5_4008_DEL_CFF-BC ........................................................................ 224
C_AGCS-GTD5_4008_DEL_CFF-GRP-AC ............................................................... 225
C_AGCS-GTD5_4008_DEL_CFF-GRP-BC ............................................................... 225
C_AGCS-GTD5_4008_DEL_CFF-UC ........................................................................ 226
C_AGCS-GTD5_4008_DEL_CFV-AC ........................................................................ 227
C_AGCS-GTD5_4008_DEL_CFV-BC ........................................................................ 227
C_AGCS-GTD5_4008_DEL_CFV-GRP-AC ............................................................... 228
C_AGCS-GTD5_4008_DEL_CFV-GRP-BC ............................................................... 229
C_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC .......................................................... 229
C_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC .......................................................... 230
C_AGCS-GTD5_4008_DEL_CFV-UC ........................................................................ 230
C_AGCS-GTD5_4008_DEL_CH ................................................................................ 231
C_AGCS-GTD5_4008_DEL_COT .............................................................................. 232
C_AGCS-GTD5_4008_DEL_CW ............................................................................... 232
C_AGCS-GTD5_4008_DEL_CWO ............................................................................ 233
C_AGCS-GTD5_4008_DEL_DCW ............................................................................. 234
C_AGCS-GTD5_4008_DEL_DP ................................................................................ 235
C_AGCS-GTD5_4008_DEL_DR ................................................................................ 235
C_AGCS-GTD5_4008_DEL_DS ................................................................................ 236
C_AGCS-GTD5_4008_DEL_DTM ............................................................................. 237
C_AGCS-GTD5_4008_DEL_FLAS ............................................................................ 237
C_AGCS-GTD5_4008_DEL_HGRP ........................................................................... 238
C_AGCS-GTD5_4008_DEL_ICID .............................................................................. 239
C_AGCS-GTD5_4008_DEL_LDDA ............................................................................ 239
C_AGCS-GTD5_4008_DEL_LINE ............................................................................. 240
C_AGCS-GTD5_4008_DEL_LNR .............................................................................. 242
C_AGCS-GTD5_4008_DEL_MWI .............................................................................. 242
C_AGCS-GTD5_4008_DEL_ORG-DDIAL ................................................................. 243
C_AGCS-GTD5_4008_DEL_PARK ........................................................................... 244
C_AGCS-GTD5_4008_DEL_SC30 ............................................................................ 245
C_AGCS-GTD5_4008_DEL_SC8 .............................................................................. 246
C_AGCS-GTD5_4008_DEL_SCA .............................................................................. 247
C_AGCS-GTD5_4008_DEL_SCF .............................................................................. 247
C_AGCS-GTD5_4008_DEL_SCR .............................................................................. 248
C_AGCS-GTD5_4008_DEL_SCW ............................................................................. 249
C_AGCS-GTD5_4008_DEL_SET-TDP ...................................................................... 250
C_AGCS-GTD5_4008_DEL_SNR .............................................................................. 250
C_AGCS-GTD5_4008_DEL_SR-DR .......................................................................... 251
C_AGCS-GTD5_4008_DEL_SSO ............................................................................. 252
C_AGCS-GTD5_4008_DEL_TDP .............................................................................. 253
C_AGCS-GTD5_4008_DEL_TDS .............................................................................. 253
C_AGCS-GTD5_4008_DEL_TEMP-DC ..................................................................... 254

viii

Oracle Corporation

C_AGCS-GTD5_4008_DEL_TRDP ........................................................................... 255


C_AGCS-GTD5_4008_DEL_TWC ............................................................................. 256
C_AGCS-GTD5_4008_DEL_UCD ............................................................................. 256
C_AGCS-GTD5_4008_DEL_UCR ............................................................................. 257
C_AGCS-GTD5_4008_MOD_CID .............................................................................. 258
C_AGCS-GTD5_4008_MOD_DN ............................................................................... 258
C_AGCS-GTD5_4008_MOD_HG-SIZE ..................................................................... 259
C_AGCS-GTD5_4008_MOD_ICID ............................................................................. 260
C_AGCS-GTD5_4008_MOD_INTERCEPT ............................................................... 261
C_AGCS-GTD5_4008_MOD_SCOS .......................................................................... 262
C_AGCS-GTD5_4008_MOD_SUB-GROUP .............................................................. 262

5. Configuring ASAP to Support Additional NE Instances ...................... 265


Extracting source files ....................................................................................................... 268
Loading a new XML file .............................................................................................. 268

Appendix A: Description of the feature parameters and their options 269


List of features and their options ....................................................................................... 269
Add Line ..................................................................................................................... 323

AG Communication Systems GTD-5 Cartridge Guide

ix

Oracle Corporation

Cartridge Overview
ASAP cartridges are discrete software components that are developed for the ASAP product.
An ASAP cartridge offers specific domain behavior on top of the core ASAP software, and
provides the configuration that supports a set of services on a network element (NE).
An ASAP cartridge is not a stand-alone component, but operates in conjunction with the
ASAP core product. ASAP cartridges offer the following benefits:

Reduced Time to Markettime to market of new services is reduced through simplified


development, implementation, and extension of cartridges on customer sites.
Extendablecartridges can be extended to include additional services and components
that deliver business value, without requiring changes to the original cartridge.
Simplified Effortthe effort and technical knowledge that is required to perform
customizations is reduced.
Ease of Installationcartridges can be installed into an ASAP environment without
interfering with the existing install base.

An ASAP cartridge can be used to configure ASAP to provision the following:

NEs from a specific vendor, such as Nortel or Lucent.


Technologies, such as Asynchronous Transfer Mode (ATM) and Frame Relay switches, or
Internet Protocol (IP) routers.
Services that are supported on the NE, such as ATM, IP Virtual Private Networks (VPN),
Wireless, or Optical.
Cartridges are designed for a specific technology, software load, and service.

An ASAP cartridge supports a particular set of services on an NE. These services are
independent of customer-specific service definitions. Professional Services or systems
integrators can perform extensions to the cartridge to support customer-specific requirements.
For more information on extending a cartridge, refer to the ASAP Cartridge Development
Guide for Service Activation.

AG Communication Systems GTD-5 Cartridge Guide

Chapter 1: Cartridge Overview

Cartridge content
An ASAP cartridge contains the following:

An interface to the NE
A set of scripts, such as State Tables or Java methods
A set of atomic actions in the form of Atomic Service Description Layer (ASDL)
commands
A set of Common Service Description Layer (CSDL) commands that form meaningful
services
Sample work orders
Installation scripts

Prerequisites
System integrators such as managers, designers, programmers, and testers who are responsible
for the adaptation and integration of ASAP-based solutions should use this manual as a
reference. It assumes that readers possess the following skills:

A knowledge of ASAP programming concepts


A good working knowledge of the UNIX operating system
A thorough understanding of service and network provisioning
Familiarity with telecommunications

About this guide


This guide provides a detailed description of the AGCS GTD-5 Cartridge. It contains
overview and technical information to assist with extending and integrating the cartridge into a
customer environment.
The scope of this guide includes ASAP as it pertains to this cartridge. It is not a complete
ASAP reference guide.
For additional ASAP information when using this cartridge, refer to the following supporting
documentation:

ASAP documentation setfor detailed information on the ASAP core product.


ASAP Cartridge Development Guide for Service Activationfor information on how
to extend a cartridge.

The AGCS GTD-5 Cartridge cartridge provides the ASAP service configuration and network
element (NE) interface to activate POTS services on AGCS NEs.

Oracle Corporation

Services, features, and options

Services, features, and options


The following table lists the provisioning services provided in the cartridge:
Table 1: POTS SERVICES
Service

Description

Unidentified Call Rejection

This service adds or deletes unidentified call rejection.

Auto Call Back

This service adds or deletes auto call back, CLASS


version Auto call back.

Automatic recall

This service adds or deletes automatic recall.

Block Translation call types

This service adds or deletes translation call types.

Call Forward

This service adds or deletes various call forwarding fixed, variable, group - all, busy, unanswered

Call Hold

This service adds or deletes call hold.

Call Park

This service adds or deletes call park.

Call Waiting Originating

This service adds or deletes call waiting originating.

Call forward group

This service adds or deletes call forward group.

Call waiting ID

This service adds or deletes call waiting ID, deluxe


call waiting ID.

Call waiting

This service adds or deletes call waiting.

Caller ID block

This service adds or deletes caller id block per call, per


line.

Calling Name, Number.

This service adds or deletes calling number only or


name and number delivery.

Cancel call waiting

This service add or deletes cancel call waiting.

Change Number

This service changes telephone number, remote call


forwarding number.

Customer originated trace

This service adds or deletes customer originated trace.

Data Security

This service adds or deletes data security.

Dial Pulse.

This service adds or deletes dial pulse.

AG Communication Systems GTD-5 Cartridge Guide

Chapter 1: Cartridge Overview

Table 1: POTS SERVICES


Service

Description

Distinctive Ring

This service enables/disables distinctive ring.

Event based billing block

This service adds or deletes event based billing


blocking for automatic busy redial, automatic recall,
customer originated trace, three way calling.

FLAS

This service set the on hook treatment field to FLAS.

Hunt Group

This service adds or deletes hunt group.

Selective call reject

This service adds or deletes selective call reject.

Info digits

This service adds or deletes info digits.

Intra Carrier ID

This service change intra LATA toll carrier.

Last Number Redial

This service adds or deletes last number redial.

Line

This service adds or deletes Line.

Originator Denied Dialing

This service adds or deletes originator denied 10XXX


or 101XXXX dialing

Permanent treatment index

This service sets the permanent treatment index.

Saved Number Redial

This service adds or deletes saved number redial.

Selective Call Acceptance

This service adds or deletes selective call acceptance.

Smart Ring

This service adds or deletes smart ring distinctive


ringing.

Selective Call Forwarding

This service adds or deletes selective call forwarding.

Selective Call Waiting

This service adds or deletes selective call waiting.

Speed Call 30

This service adds or deletes speed call 30.

Speed Call 8

This service adds or deletes speed call 8.

Temporary Disconnect.

This service enables or disables temporary disconnect.

Three way calling

This service adds or deletes three way calling.

Trigger Detection Point.

This service adds or deletes trigger detection point,


call intercept.

Oracle Corporation

Hardware and software requirements

Table 1: POTS SERVICES


Service

Description

Translation Detection Point.

This service adds or deletes translation detection point.

Uniform Call Distribution

This service adds or deletes uniform call distribution.

Usage assignable, Usage recordable

This service adds or deletes usage assignable/


recordable (UACL,UANC,URCL,URCN).

Special Screening on Origination

This service adds or deletes special screening on


origination.

Translation set data

This service adds or deletes translation set data.

Denied termination

This service adds or deletes denied termination


feature.

Control Party for group

This service adds or deletes control party for group


feature.

Intercept

This service modify intercept service name after


deleting a line.

Hardware class mark set

This service adds hardware class mark set feature.

Group for survivability

This service adds group for survivability.

Line supervision method

This service adds line supervision method.

Long distance distinctive ringing and/or distinctive


call waiting tone

This service adds or deletes long distance distinctive


ringing and/or distinctive call waiting tone.

Secondary class of service.

This service modifies SCOS and optionally PCOS of a


line.

Hardware and software requirements


The following sections contain the high-level software and hardware environment
requirements for provisioning POTS services using this cartridge, including:

Network element (NE) interface


ASAP version

Network element (NE) interface


This cartridge operates with the following:

AG Communication Systems GTD-5 Cartridge Guide

Chapter 1: Cartridge Overview

AG Communication Systems' GTD-5 switch, software load 4.0.0.8


Telnet protocol is used for ASAP to access the NE

ASAP version
This cartridge was developed and tested using ASAP 4.7.1.
For more information on the operating environment of this ASAP version, refer to the ASAP
4.7.1 Release Record.

Connecting to the NE
ASAP uses the telnet protocol to access the GTD-5 NE.

Related documentation
This cartridge was developed according to the following Network Element Provisioning
Specifications:

Lucent Technologies GTD-5 EAX Documentation (CD-ROM)

Oracle Corporation

Installing and Testing the Cartridge


This chapter describes the following procedures related to installing and testing the cartridge:

Downloading the cartridge


Installing the cartridge
Uninstalling the cartridge
Testing the cartridge installation

Downloading the cartridge


Before you can install the cartridge, you must use the internet to download the cartridges
TAR file from Oracles Customer Portal.
Use the following instructions to download, then unTAR the TAR file.
To download the TAR file
1. Login to Oracle MetaLink internet home page (http://www.metalink.oracle.com).
2. Download the cartridge patch to your workstation.
To unTAR the TAR file
1. On your workstation, create a repository directorythe naming of which is your choice.
mkdir <repository dir>

2. Untar AGCSGTD5_R2_0_0.xxx.tar
tar xvf AGCSGTD5_R2_0_0.xxx.tar

3. Copy the resulting /AGCS_GTD5_4008 directory and its contents to the repository
directory.
cp -rf /AGCS_GTD5_4008 <repository_dir>

The directory structure in the repository directory should look like the following illustration.
(this illustration describes the minimum required structure; you can enhance this directory
structure with additional directories based on your requirements and deliverables).
<repository_directory>
AGCS_GTD5_4008
/README
/installCartridge

AG Communication Systems GTD-5 Cartridge Guide

Chapter 2: Installing and Testing the Cartridge

/uninstallCartridge
/AGCS_GTD5_4008_POTS_2_0.sar

Starting ASAP
Before installing the cartridge, ensure that ASAP is running.
To start ASAP
1. To start ASAP, execute the following script:
start_asap_sys

2. Ensure the ASAP Daemon (DAM_$ENV_ID) is running by checking the ASAP status
using the ASAP script status.
3. Check whether the WebLogic instance for this ASAP environment is running. If not, start
the WebLogic instance.
The ASAP Administration Guide contains more information on starting ASAP, the ASAP
Daemon, and WebLogic.

Installing the cartridge


Run the installation script installCartridge to install the cartridge. You will find this script
under /AGCS_GTD5_4008. The script executes the following tasks:

Configures the AGCS GTD-5 Cartridge-specific NE using the SACT.


Deploys the AGCS GTD-5 Cartridge service model (only if the AGCS GTD-5 Cartridge
service model is not yet deployed) using the Service Activation Deployment Tool
(SADT).
Copies the AGCS GTD-5 Cartridge-specific jar files and the cpp library file to the ASAP
environment.
Loads the sample work orders to the SRP database.

For information on the SACT and the SADT, refer to the ASAP Administration Guide.
To install the cartridge
1. Run the installCartridge script from /AGCS_GTD5_4008. At the prompt, type:
installCartridge AGCS_GTD5_4008_POTS_2_0.sar

2. The script prompts you for the values of the following WebLogic login parameters:

WebLogic Hostname
WebLogic HTTP Port
WebLogic Login User ID
WebLogic Login Password

Oracle Corporation

Uninstalling the cartridge

The script loads the NEP-NE configuration and the CSDL-ASDL configuration to the
SARM database, and loads sample work orders to the SRP database. The script also copies
the cartridge-specific jar files and cpp library file to the ASAP environment.
3. Restart ASAP to upload the cartridge configuration into ASAP.

Uninstalling the cartridge


Run the uninstallation script uninstallCartridge to uninstall the AGCS GTD-5 Cartridge. This
script is located under AGCS_GTD5_4008. The script executes the following tasks:

Unconfigures AGCS GTD-5 Cartridge-specific NEs using the SACT.


Undeploys the AGCS GTD-5 Cartridge service model (only if the AGCS GTD-5
Cartridge service model is already deployed) using the Service Activation Deployment
Tool (SADT).
Removes the AGCS GTD-5 Cartridge-specific jar files and cpp library file from the ASAP
environment.

For more information on the SACT and the SADT, refer to the ASAP Administration Guide.
To uninstall the cartridge
1. Run the uninstallCartridge script from /AGCS_GTD5_4008. At the prompt, type
uninstallCartridge AGCS_GTD5_4008_POTS_2_0.<timestamp>.sar

2. The script prompts you for the values of the following parameters:

WebLogic Hostname
WebLogic HTTP Port
WebLogic Login User ID
WebLogic Login Password

The script unloads the NEP-NE configuration and CSDL-ASDL configuration from SARM
database. It also removes the cartridge specific jar files and cpp library file from the ASAP
environment.

Testing the cartridge installation


To test this cartridge installation, you need to know about the network element (NE), services,
and basic ASAP configuration. You may need to perform adjustments to provision a service
for a specific NE, network, or connectivity configuration.
You can test the cartridge installation using one of the following methods:

Loopback modedoes not actually connect to or send commands to the NE.


Live modeconnects to and sends commands to a live NE.

AG Communication Systems GTD-5 Cartridge Guide

Chapter 2: Installing and Testing the Cartridge

Configuring loopback and live mode parameters


Sets the following variables to test the cartridge in loopback or live testing modes.

Loopback mode
Sets the following parameter to test the cartridge in loopback mode.
Table 2: Loopback Mode Parameter Settings
Configuration Variable
LOOPBACK_ON

Parameter Settings
1 (default setting)

Location
ASAP.cfg

Live mode
Sets the following parameter to test the cartridge in live mode.
Table 3: Live Mode Parameter Settings
Configuration Variable
LOOPBACK_ON

Parameter Settings
0

Location
ASAP.cfg

Communication parameters
The following are the list of parameters for the sample NE configuration XML used by SACT.
Table 4: Communication parameters in ne_config XML
Parameters

Default Value

Description

HOST_IPADDR

141.239.14.71

The IP Address of Server.

PORT

23

Port number.

HOST_USERID

z775379

User id for Login.

HOST_PASSWORD

123456mm

Password to login.

READ_TIMEOUT

30

Read timeout in seconds.

LOGIN_PROMPT

login:

Login Prompt.

PASSWORD_PROMPT

Password:

Password prompt.

10

Oracle Corporation

Testing the cartridge installation

Table 4: Communication parameters in ne_config XML


Parameters

Default Value

Description

PROMPT

Provisioning Prompt.

ACCESS_GUARD

Flag to turn on or off Access Guard


gateway.

DESTINATION_ID

MILNHICODS1

Destination Identification number.

DESTINATION_PROMPT

Destination:

Destination Prompt.

RESPONSELOG

TRUE

Flag to turn on or off response


logging.

OPEN_TIMEOUT

20

Connection timeout in seconds.

Modifying agcs_gtd5_4008_pots_ne_config.xml
Use the following procedure to modify agcs_gtd5_4008_pots_ne_config.xml.
To modify agcs_gtd5_4008_pots_ne_config.xml
1. Create a new source directory under /AGCS_GTD5_4008. You can give this directory any
appropriate, meaningful name you want to.
mkdir <new_source_directory>

2. Copy AGCS_GTD5_4008_POTS_2_0.sar to this new source directory.


cp AGCS_GTD5_4008_POTS_2_0.sar ./<new_source_directory>

3. Change directory to <new_source_directory>.


cd <new_source_directory>

4. Un-jar AGCS_GTD5_4008_POTS_2_0.sar This extracts the contents of the sar file (see
Figure 1 on page 12 for an example of the resulting file structure).
jar xvf AGCS_GTD5_4008_POTS_2_0.sar

5. Edit <new_source_directory>/AGCS_GTD5_4008/common/application_config/
agcs_gtd5_4008_pots_ne_config.xml in with the appropriate changes.
6. Create a new sar file at the <new_source_directory> level.
CreateSar $PWD

AG Communication Systems GTD-5 Cartridge Guide

11

Chapter 2: Installing and Testing the Cartridge

7. Uninstall the cartridge using AGCS_GTD5_4008_POTS_2_0.sar in /AGCS_GTD5_4008


(That is, use the original sar file that you copied in Step 2 abovesee Uninstalling the
cartridge on page 9 for uninstallation instructions).
8. After you uninstall the cartridge, rename the sar file in /AGCS_GTD5_4008 so you have a
backup copy of it.
9. Copy the new sar file from <new_source_directory> to /AGCS_GTD5_4008.
10. Reinstall the cartridge (see Installing the cartridge on page 8 for installation
instructions).

Figure 1: File Structure of the Un-Jared .sar File

12

Oracle Corporation

Testing the cartridge installation

Testing the installation


The following procedure describes the steps required to test the cartridge installation in
loopback mode. We recommend that you perform the initial cartridge installation test in
loopback mode.
To test in loopback mode
1. Stop ASAP by typing the following command at the UNIX prompt:
stop_asap_sys

2. Ensure loop back mode is on. See Loopback mode on page 10 for a description of how
to set the loop back parameter to On.
3. Start ASAP by typing:
start_asap_sys

4. Send the sample work orders through the SRP Emulator by typing:
run_suite $SRP <ctrl_password> <suite name>

You can locate the suite names in /AGCS_GTD5_4008/sample_wo by typing:


grep

SUITE * | grep -v END

A list of all available suites appears.


To see the sample work orders, refer to Viewing the sample work orders, below.
For more information on the SRP Emulator, refer to the ASAP Administration Guide.
5. Verify the status of the sample work orders by typing:
asap_utils l

All successful work orders return the 104 state.


To view the sample work orders provided with this cartridge, refer to the AGCS GTD-5
Cartridge cartridge source.

Viewing the sample work orders


You find the sample work orders under the sample_wo directory in the sar file. The following
procedure describes how to view the sample work orders.
To view the sample work orders
1. If necessary, create a repository directory under /AGCS_GTD5_4008, copy the sar file to
the new directory and un-jar the sar file, as described by Step 1 through Step 4 in
Modifying agcs_gtd5_4008_pots_ne_config.xml on page 11.
2. Locate and view the sample work order files under /AGCS/GTD5_4008/POTS/
sample_wo.

AG Communication Systems GTD-5 Cartridge Guide

13

Chapter 2: Installing and Testing the Cartridge

14

Oracle Corporation

Atomic Service Description Layer (ASDL)


Commands
ASDL commands represent a set of atomic actions that ASAP can perform on a network
element (NE). ASAP can combine ASDLs to create meaningful services (CSDLs) within a
cartridge.
This chapter presents detailed information on the ASDL parameters that we provide with this
cartridge. The following table lists and describes the type of parameter information that is
included.
Table 5: ASDL parameter information
Item

Description

Parameter Name

Identifies the parameter that is configured for the stated service.

Description

Describes the parameter.

Range

Describes or lists the range of values that can be used to satisfy this
parameter.

Default Value

Configures a default value for the parameter and not mandatory for the
upstream system to provide a value.

AG Communication Systems GTD-5 Cartridge Guide

15

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 5: ASDL parameter information


Item
Type

Description
Indicates one of the following parameter types:

SScalar, specifies the parameter label transmitted on the ASDL


command. Scalar parameters are conventional name-value pair
parameters.
CCompound, specifies the base name of the compound
parameter transmitted on the ASDL command. A compound
parameter contains structures or arrays of information that are
represented by a particular structure name or compound parameter
name. Each compound parameter can contain a large number of
elements. If you use compound parameters, you only require a
single entry in the ASAP translation tables to call the compound
parameter and all its associated parameter elements.
IIndexed, identifies a parameter that contains a sequential
numerical index value to tell the SARM that it should execute the
same operation (for example, an ASDL command) for all
occurrences of that index. Consequently, if there are several
options on a particular CSDL command (OPT1, OPT2, OPT3,
etc.), you can specify the OPT parameter as an indexed parameter.
When you specify the OPT parameter as an indexed parameter, the
SARM generates several occurrences of that same ASDL
command and each command has a different value for the option
being transmitted to the NEP.

For more information on parameter types, refer to the ASAP


Developers Reference.
Class

Indicates one of the following parameter classifications:

RRequired scalar parameter


OOptional scalar parameter
CRequired compound parameter
NOptional compound parameter
MMandatory indexed parameter
IOptional indexed parameter
SParameter count

For a detailed description of the Required and Optional parameter classifications, refer to the
ASAP Administration Guide.

16

Oracle Corporation

Commercial services service pack

Commercial services service pack


The AGCS GTD-5 Cartridge provides the following ASDL commands to support POTS
service on AGCS NEs:

A_AGCS-GTD5_4008_ADD_ACB
A_AGCS-GTD5_4008_ADD_ACB-CLASS
A_AGCS-GTD5_4008_ADD_AR
A_AGCS-GTD5_4008_ADD_ATWC
A_AGCS-GTD5_4008_ADD_BLOCK-PC
A_AGCS-GTD5_4008_ADD_BLOCK-TCT
A_AGCS-GTD5_4008_ADD_CALL-PICKUP
A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL
A_AGCS-GTD5_4008_ADD_CALLING-NN
A_AGCS-GTD5_4008_ADD_CDGG
A_AGCS-GTD5_4008_ADD_CFF-AC
A_AGCS-GTD5_4008_ADD_CFF-BC
A_AGCS-GTD5_4008_ADD_CFF-GRP-AC
A_AGCS-GTD5_4008_ADD_CFF-GRP-BC
A_AGCS-GTD5_4008_ADD_CFF-UC
A_AGCS-GTD5_4008_ADD_CFV-AC
A_AGCS-GTD5_4008_ADD_CFV-BC
A_AGCS-GTD5_4008_ADD_CFV-GRP-AC
A_AGCS-GTD5_4008_ADD_CFV-GRP-BC
A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC
A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC
A_AGCS-GTD5_4008_ADD_CFV-UC
A_AGCS-GTD5_4008_ADD_CH
A_AGCS-GTD5_4008_ADD_COT
A_AGCS-GTD5_4008_ADD_CW
A_AGCS-GTD5_4008_ADD_CWO
A_AGCS-GTD5_4008_ADD_DCW
A_AGCS-GTD5_4008_ADD_DP
A_AGCS-GTD5_4008_ADD_DR
A_AGCS-GTD5_4008_ADD_DS
A_AGCS-GTD5_4008_ADD_DTM
A_AGCS-GTD5_4008_ADD_FLAS

AG Communication Systems GTD-5 Cartridge Guide

17

Chapter 3: Atomic Service Description Layer (ASDL) Commands

18

A_AGCS-GTD5_4008_ADD_HCMK
A_AGCS-GTD5_4008_ADD_HGRP
A_AGCS-GTD5_4008_ADD_HGRP-MEM
A_AGCS-GTD5_4008_ADD_INFO-DIGIT
A_AGCS-GTD5_4008_ADD_LDDA
A_AGCS-GTD5_4008_ADD_LINE
A_AGCS-GTD5_4008_ADD_LNR
A_AGCS-GTD5_4008_ADD_LSM
A_AGCS-GTD5_4008_ADD_MWI
A_AGCS-GTD5_4008_ADD_ORG-DDIAL
A_AGCS-GTD5_4008_ADD_PARK
A_AGCS-GTD5_4008_ADD_PERM
A_AGCS-GTD5_4008_ADD_PILOT-LINE
A_AGCS-GTD5_4008_ADD_RSU
A_AGCS-GTD5_4008_ADD_SC30
A_AGCS-GTD5_4008_ADD_SC8
A_AGCS-GTD5_4008_ADD_SCA
A_AGCS-GTD5_4008_ADD_SCF
A_AGCS-GTD5_4008_ADD_SCR
A_AGCS-GTD5_4008_ADD_SCW
A_AGCS-GTD5_4008_ADD_SET-CCF
A_AGCS-GTD5_4008_ADD_SET-TDP
A_AGCS-GTD5_4008_ADD_SNR
A_AGCS-GTD5_4008_ADD_SR-DR
A_AGCS-GTD5_4008_ADD_SSO
A_AGCS-GTD5_4008_ADD_TDP
A_AGCS-GTD5_4008_ADD_TDS
A_AGCS-GTD5_4008_ADD_TEMP-DC
A_AGCS-GTD5_4008_ADD_TRDP
A_AGCS-GTD5_4008_ADD_TWC
A_AGCS-GTD5_4008_ADD_UACL
A_AGCS-GTD5_4008_ADD_UACN
A_AGCS-GTD5_4008_ADD_UANC
A_AGCS-GTD5_4008_ADD_UCD
A_AGCS-GTD5_4008_ADD_UCR
A_AGCS-GTD5_4008_ADD_URCL

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_URCN
A_AGCS-GTD5_4008_ADD_URNC
A_AGCS-GTD5_4008_DEL_ACB
A_AGCS-GTD5_4008_DEL_ACB-CLASS
A_AGCS-GTD5_4008_DEL_AR
A_AGCS-GTD5_4008_DEL_ATWC
A_AGCS-GTD5_4008_DEL_BLOCK-PC
A_AGCS-GTD5_4008_DEL_BLOCK-TCT
A_AGCS-GTD5_4008_DEL_CALL-PICKUP
A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL
A_AGCS-GTD5_4008_DEL_CALLING-NN
A_AGCS-GTD5_4008_DEL_CDGG
A_AGCS-GTD5_4008_DEL_CFF-AC
A_AGCS-GTD5_4008_DEL_CFF-BC
A_AGCS-GTD5_4008_DEL_CFF-GRP-AC
A_AGCS-GTD5_4008_DEL_CFF-GRP-BC
A_AGCS-GTD5_4008_DEL_CFF-UC
A_AGCS-GTD5_4008_DEL_CFV-AC
A_AGCS-GTD5_4008_DEL_CFV-BC
A_AGCS-GTD5_4008_DEL_CFV-GRP-AC
A_AGCS-GTD5_4008_DEL_CFV-GRP-BC
A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC
A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC
A_AGCS-GTD5_4008_DEL_CFV-UC
A_AGCS-GTD5_4008_DEL_CH
A_AGCS-GTD5_4008_DEL_COT
A_AGCS-GTD5_4008_DEL_CW
A_AGCS-GTD5_4008_DEL_CWO
A_AGCS-GTD5_4008_DEL_DCW
A_AGCS-GTD5_4008_DEL_DP
A_AGCS-GTD5_4008_DEL_DR
A_AGCS-GTD5_4008_DEL_DS
A_AGCS-GTD5_4008_DEL_DTM
A_AGCS-GTD5_4008_DEL_FLAS
A_AGCS-GTD5_4008_DEL_HGRP
A_AGCS-GTD5_4008_DEL_ICID

AG Communication Systems GTD-5 Cartridge Guide

19

Chapter 3: Atomic Service Description Layer (ASDL) Commands

20

A_AGCS-GTD5_4008_DEL_LDDA
A_AGCS-GTD5_4008_DEL_LINE
A_AGCS-GTD5_4008_DEL_LNR
A_AGCS-GTD5_4008_DEL_MWI
A_AGCS-GTD5_4008_DEL_ORG-DDIAL
A_AGCS-GTD5_4008_DEL_PARK
A_AGCS-GTD5_4008_DEL_SC30
A_AGCS-GTD5_4008_DEL_SC8
A_AGCS-GTD5_4008_DEL_SCA
A_AGCS-GTD5_4008_DEL_SCF
A_AGCS-GTD5_4008_DEL_SCR
A_AGCS-GTD5_4008_DEL_SCW
A_AGCS-GTD5_4008_DEL_SET-TDP
A_AGCS-GTD5_4008_DEL_SNR
A_AGCS-GTD5_4008_DEL_SR-DR
A_AGCS-GTD5_4008_DEL_SSO
A_AGCS-GTD5_4008_DEL_TDP
A_AGCS-GTD5_4008_DEL_TDS
A_AGCS-GTD5_4008_DEL_TEMP-DC
A_AGCS-GTD5_4008_DEL_TRDP
A_AGCS-GTD5_4008_DEL_TWC
A_AGCS-GTD5_4008_DEL_UCD
A_AGCS-GTD5_4008_DEL_UCR
A_AGCS-GTD5_4008_MOD_CID
A_AGCS-GTD5_4008_MOD_DN
A_AGCS-GTD5_4008_MOD_HG-SIZE
A_AGCS-GTD5_4008_MOD_ICID
A_AGCS-GTD5_4008_MOD_INTERCEPT
A_AGCS-GTD5_4008_MOD_SCOS
A_AGCS-GTD5_4008_MOD_SUB-GROUP

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_ACB
Adds the auto call back feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addACB.
Table 6: A_AGCS-GTD5_4008_ADD_ACB
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

ACB_ACBB

Unrestricted automatic callback.

Y/N

ACB_ACBC

Semi-restricted automatic callback.

Y/N

MML commands
CHAN DN [DN] [ACBB|ACBC]

Note: ACBB is used if ACB_ACBB is set to Y.ACBC is used if ACB_ACBC is set to Y.

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

21

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_ACB-CLASS
Adds the CLASS - auto call back feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addACB_CLASS.
Table 7: A_AGCS-GTD5_4008_ADD_ACB-CLASS
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] ACBD

Output parameters
None.

A_AGCS-GTD5_4008_ADD_AR
Adds the automatic recall feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addAR.
Table 8: A_AGCS-GTD5_4008_ADD_AR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

22

Oracle Corporation

Commercial services service pack

Table 8: A_AGCS-GTD5_4008_ADD_AR
Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

ARC_TYPE

Type of automatic recalling.


ARCB or ARCC.

MML commands
CHAN DN [DN] ARCB|ARCC

Output parameters
None.

A_AGCS-GTD5_4008_ADD_ATWC
Adds the always available usage sensitive three-way calling feature. It is implemented by the
Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addATWC.
Table 9: A_AGCS-GTD5_4008_ADD_ATWC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] ATWC

AG Communication Systems GTD-5 Cartridge Guide

23

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Output parameters
None.

A_AGCS-GTD5_4008_ADD_BLOCK-PC
Adds the prefix call blocking feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addBLOCK_PC.
Table 10: A_AGCS-GTD5_4008_ADD_BLOCK-PC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

BIDD

Block 011+ dialing.

BIE3

Block 01+ dialing.

BZMS

Block 0- dialing.

BZZM

Block 00- dialing.

B0PS

Block 0+ dialing.

B1PS

Block 1+ dialing.

BLKP

Block prefix calls.

MML commands
CHAN DN [DN] BLKP[.BIDD[.BIE3[.BZMS[.BZZM[.BOPS[.B1PS]]]]]]
if BLKP is set, options are omitted.

Output parameters
None.

24

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_BLOCK-TCT
Adds the translation call type blocking feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addBLOCK_TCT.
Table 11: A_AGCS-GTD5_4008_ADD_BLOCK-TCT
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

B556

Block 556 calls.

Y/N

B700

Block 700 calls.

Y/N

B900

Block 900 calls.

Y/N

B976

Block 976 calls.

Y/N

BLDA

Block local directory assistance Y/N


calls.

BLKT

Block translation call type calls. Y/N

MML commands
CHAN DN [DN] BLKT[.B556[.B700[.B900[.B976[.BLDA]]]]]
if BLKT is set, options are omitted.

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

25

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_CALL-PICKUP
Adds the call pickup - directed or group or extended feature to a line. It is implemented by the
Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCALL_PICKUP.
Table 12: A_AGCS-GTD5_4008_ADD_CALL-PICKUP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

PICK_TYPE

Type of call-pickup:

PICK_GROUP

GEN=General group call


pickup
DIRG=Directed group call
pickup
XGEN=Extended general
call pickup
DIRD=Directed call pickup
based on dialing plan
SOHO=Small office/home
office pickup

General call pickup group


assigned.

MML commands
CHAN DN [DN] PICK.[DIRD|DIRG|GEN]

Output parameters
None.

26

Oracle Corporation

0 - 4095

Commercial services service pack

A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL
Adds the caller ID block per line feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCALLER_ID_BLK_PL.
Table 13: A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] CNDB

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CALLING-NN
Adds the calling name and number delivery. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCALLING_NN.
Table 14: A_AGCS-GTD5_4008_ADD_CALLING-NN
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

27

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 14: A_AGCS-GTD5_4008_ADD_CALLING-NN


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

CLND

Calling name delivery.

Y/N

CNDE

Calling number delivery.

Y/N

MML commands
CHAN DN [DN] [CLND] [CNDE]

Note: One of CLND and CNDE should be set to Y.

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CDGG
Adds the control party for the group features. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCDGG.
Table 15: A_AGCS-GTD5_4008_ADD_CDGG
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

28

Oracle Corporation

Commercial services service pack

MML commands
CHAN DN [DN] CDGG

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CFF-AC
Adds the call forward fixed all calls feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_AC.
Table 16: A_AGCS-GTD5_4008_ADD_CFF-AC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

DAFI_ACT

Y/N
Specifies whether call
forwarding can be activated by a
customer-dialed code.

DAFI_REM

The type of call forwarding


assigned.

normal REM
remote RCF

DAFI_REM_NUM

The maximum number of


simultaneous calls to forward.

0 - 255

DAFI_TODA

Specifies whether call


Y/N
forwarding all calls fixed can be
activated by time of day/day of
week basis.

AG Communication Systems GTD-5 Cartridge Guide

29

Chapter 3: Atomic Service Description Layer (ASDL) Commands

MML commands
CHAN DN [DN] DAFI.<DAFI_ACT>.<DAFI_REM><DAFI_REM_NUM>.DAFI_TODA

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CFF-BC
Adds the call forward fixed busy feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_BC.
Table 17: A_AGCS-GTD5_4008_ADD_CFF-BC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

DBFI_ACT

Y/N
Specifies whether call
forwarding can be activated by a
customer-dialed code.

DBFI_REM

The type of call forwarding


assigned.

normal REM
remote RCF

DBFI_REM_NUM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

DBFI_TODA

Y/N
Specifies whether the call
forwarding all calls fixed feature
can be activated by time of day/
day of week basis.

30

Oracle Corporation

Commercial services service pack

MML commands
CHAN DN [DN] DBFI.<DBFI_ACT>.<DBFI_REM><DBFI_REM_NUM>.DBFI_TODA

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CFF-GRP-AC
Adds the call forward group fixed all calls feature. It is implemented by the Java method
com.metasolv.cartridge.os.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_GRP_AC.
Table 18: A_AGCS-GTD5_4008_ADD_CFF-GRP-AC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

DAFG_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DAFG_REM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

MML commands
CHAN HGRP[HGRP] DAFG.<DAFG_ACT>.<DAFG_REM>

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

31

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_CFF-GRP-BC
Adds the call forward group fixed busy calls feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_GRP_BC.
Table 19: A_AGCS-GTD5_4008_ADD_CFF-GRP-BC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

DBFG_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DBFG_REM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

MML commands
CHAN HGRP[HGRP] DBFG.<DBFG_ACT>.<DBFG_REM>

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CFF-UC
Adds the call forward fixed unanswered. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_UC.
Table 20: A_AGCS-GTD5_4008_ADD_CFF-UC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

32

Oracle Corporation

Commercial services service pack

Table 20: A_AGCS-GTD5_4008_ADD_CFF-UC


Parameter Name

Description

Range

Default
Value

Type

Class

NXX

Exchange of the DN.

LINE

Line of the DN.

DNFI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DNFI_NAT

Prevents subscriber from


changing the number of rings.

DNFI_RING

Number of seconds the device is 0 - 60


rung before the call is
forwarded.

DNFI_REM

Maximum number of
simultaneous calls that can be
forwarded.

Y/N,
Y=NAT,
N=VNA
T

0 - 255

MML commands
CHAN DN [DN] DNFI.<DNFI_ACT>.<DNFI_REM>.<DNFI_NAT><DNFI_RING>

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CFV-AC
Adds the call forward variable all calls feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_AC.
Table 21: A_AGCS-GTD5_4008_ADD_CFV-AC
Parameter Name
MCLI

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

AG Communication Systems GTD-5 Cartridge Guide

33

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 21: A_AGCS-GTD5_4008_ADD_CFV-AC


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

DAVI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DAVI_REM

Type of call forwarding


assigned.

normal REM
remote RCF

DAVI_REM_NUM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

DAVI_TODA

Y/N
Specifies whether call
forwarding all calls fixed can be
activated by time of day/day of
week basis.

MML commands
CHAN DN [DN] DAVI.<DAVI_ACT>.<DAVI_REM><DAVI_REM_NUM>.DAVI_TODA

Output parameters
None.

34

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_CFV-BC
Adds the call forward variable busy calls feature to a line. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_BC.
Table 22: A_AGCS-GTD5_4008_ADD_CFV-BC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

DBVI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DBVI_REM

Maximum number of
simultaneous calls that can be
forwarded.

DBVI_TODA

Y/N
Specifies whether call
forwarding all calls fixed can be
activated by time of day/day of
week basis.

0 - 255

MML commands
CHAN DN [DN] DBVI.<DBVI_ACT>.<DBVI_REM>.DBVI_TODA

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

35

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_CFV-GRP-AC
Adds the call forward group all calls variable feature to a line. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRP_AC.
Table 23: A_AGCS-GTD5_4008_ADD_CFV-GRP-AC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

DAVG_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DAVG_REM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

MML commands
CHAN HGRP [HGRP] DAVG.<DAVG_ACT>.<DAVG_REM>

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CFV-GRP-BC
Adds the call forward group variable busy calls feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRP_BC.
Table 24: A_AGCS-GTD5_4008_ADD_CFV-GRP-BC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

DBVG_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

36

Oracle Corporation

Commercial services service pack

Table 24: A_AGCS-GTD5_4008_ADD_CFV-GRP-BC


Parameter Name
DBVG_REM

Description
Maximum number of
simultaneous calls that can be
forwarded.

Range

Default
Value

0 - 255

Type
S

Class
R

MML commands
CHAN HGRP[HGRP] DBVG.<DBVG_ACT>.<DBVG_REM>

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC
Adds the call forward group shared variable busy calls feature. It is implemented by the Java
method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRPSH_BC.
Table 25: A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

DBVS_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DBVS_REM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

MML commands
CHAN HGRP[HGRP] DBVS.<DVFS_ACT>.<DVFS_REM>

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

37

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC
Adds the call forward group shared variable unanswered calls feature. It is implemented by the
Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRPSH_UC.
Table 26: A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

DNVS_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DNVS_REM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

DNVS_NAT

Prevents subscriber from


changing the number of rings.

Y/N,
Y=NAT,
N=VNA
T

DNVS_RING

The number of rings provided


before the call is forwarded.

0 - 60

MML commands
CHAN HGRP[HGRP] DBVS.<DNVS_ACT>.<DNVS_REM>.<DNVS_NAT><DNVS_RING>

Output parameters
None.

38

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_CFV-UC
Adds the call forward variable unanswered calls feature to a line. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_UC.
Table 27: A_AGCS-GTD5_4008_ADD_CFV-UC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

DNVI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DNVI_NAT

Prevents subscriber from


changing the number of rings.

DNVI_RING

Number of seconds the device is 0 - 60


rung before the call is
forwarded.

DNVI_REM

Maximum number of
simultaneous calls that can be
forwarded.

Y/N,
Y=NAT,
N=VNA
T

0 - 255

MML commands
CHAN DN [DN] DNVI.<DNVI_ACT>.<DNVI_REM>.<DNVI_NAT><DNVI_RING>

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

39

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_CH
Adds the call hold feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCH.
Table 28: A_AGCS-GTD5_4008_ADD_CH
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

HOLD_METHOD

Flip flop by Digit method


(DIGIT) or Flip flop by Flash
metod (FLASH)

MML commands
if HOLD_METHOD is DIGIT,
CHAN DN [DN] FFBD
if HOLD_METHOD is FLASH
CHAN DN [DN] FFBF

Output parameters
None.

40

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_COT
Adds the customer originated trace feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCOT.
Table 29: A_AGCS-GTD5_4008_ADD_COT
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] COTR

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CW
Adds the call waiting feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCW.
Table 30: A_AGCS-GTD5_4008_ADD_CW
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

41

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 30: A_AGCS-GTD5_4008_ADD_CW


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

CWT_CWCJ

Call waiting with call join.

Y/N

CWT_CWD1

Call waiting deluxe type 1.

Y/N

CWT_CWD2

Call waiting deluxe type 2.

Y/N

CWT_CWD3

Call waiting deluxe type 3.

Y/N

CWT_CWD4

Call waiting deluxe type 4.

Y/N

CWT_CWD5

Call waiting deluxe type 5.

Y/N

CWT_CWID

Calling identity delivery on call Y/N


waiting.

CWT_CWJI

Call waiting with call join and


calling identity delivery on call
waiting.

Y/N

CWT_CWT

Call waiting terminating/


additional call offering.

Y/N

CW_ID_CODE

Specifies whether the call


waiting cancellation is allowed.

Y/N

CWDD_ANNO

Route to call waiting deluxe


default announcement.

Y/N

CWDD_FORW

Forward to call forwarding on


no answer digits.

Y/N

CWDD_RING

Continue ringing.

Y/N

MML commands
CHAN DN [DN]
[CWCJ|CWD1|CWD2|CWD3|CWD4|CWD5|CWID|CWJI|CWT].[CODE|NCOD].[ANNO|FORW|RING]

42

Oracle Corporation

Commercial services service pack

Output parameters
None.

A_AGCS-GTD5_4008_ADD_CWO
Adds the call waiting originating feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCWO.
Table 31: A_AGCS-GTD5_4008_ADD_CWO
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

CWO_CODE

Specifies whether the call


waiting feature is code
controlled.

Y/N

MML commands
if CWO_CODE is Y,
CHAN DN [DN] CWO.CODE
otherwise
CHAN DN [DN] CWO.NCOD

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

43

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_DCW
Adds the distinctive call waiting feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDCW.
Table 32: A_AGCS-GTD5_4008_ADD_DCW
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] DRCW

Output parameters
None.

A_AGCS-GTD5_4008_ADD_DP
Adds the dial pulse feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDP.
Table 33: A_AGCS-GTD5_4008_ADD_DP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

44

Oracle Corporation

Commercial services service pack

Table 33: A_AGCS-GTD5_4008_ADD_DP


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] SPTD

Output parameters
None.

A_AGCS-GTD5_4008_ADD_DR
Enables the distinctive Ring feature on a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDR.
Table 34: A_AGCS-GTD5_4008_ADD_DR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
CHAN HGRP[HGRP_NUM] SUBG2

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

45

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_DS
Adds the data security. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDS.
Table 35: A_AGCS-GTD5_4008_ADD_DS
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

DS_DAD

Data line security assigned at all Y/N


times.

DS_BDAD

Data line security assigned with Y/N


the option to deactivate the
feature for the duration of one
call by dialing a code.

DS_CDAD

Data line security normally


Y/N
inactive but can be activated for
the duration of one call by
dialing a code.

MML commands
CHAN DN [DN] [DAD|BDAD|CDAD]

Output parameters
None.

46

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_DTM
Adds the denied termination feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDTM.
Table 36: A_AGCS-GTD5_4008_ADD_DTM
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] DTM

Output parameters
None.

A_AGCS-GTD5_4008_ADD_FLAS
Sets the on hook treatment field. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addFLAS.
Table 37: A_AGCS-GTD5_4008_ADD_FLAS
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

47

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 37: A_AGCS-GTD5_4008_ADD_FLAS


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] FLAS

Output parameters
None.

A_AGCS-GTD5_4008_ADD_HCMK
Adds a hardware classmark set. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addHCMK.
Table 38: A_AGCS-GTD5_4008_ADD_HCMK
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

HCMK_DIGIT

HCMK digit.

HCMK_VALUE

HCMK value.

48

Oracle Corporation

Commercial services service pack

MML commands
CHAN DN [DN] [HCMKxxxx/='name']

Output parameters
None.

A_AGCS-GTD5_4008_ADD_HGRP
Adds an hunt group. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addHGRP.
Table 39: A_AGCS-GTD5_4008_ADD_HGRP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

ALT_ROUTE

Alternate route.

LINK

Link.

SCOS

Secondary class of service.

MJAT

Major alarm.

MNAT

Minor alarm.

PCOS

Primary class of service.

RELS

Release.

CSNK

Charge sink. Required, if the


SCOS is not provided.

RSNK

Selective Route Sink.

SIZE

Size.

SSNK

Screen Sink.

RSU_DIGIT

RSU digit.

BILLING_DN

Billing directory number.

BILLING_NPA

Area code of billing DN.

AG Communication Systems GTD-5 Cartridge Guide

49

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 39: A_AGCS-GTD5_4008_ADD_HGRP


Parameter Name

Description

Range

Default
Value

Type

Class

BILLING_NXX

Exchange of billing DN.

BILLING_LINE

Line of billing DN.

OPT

Other optional parameters.

HCMK_DIGIT

HCMK digit.

HCMK_VALUE

HCMK value.

BGRP

Business group number.

MML commands
ADD HGRP[HGRP_NUM] ALT/LINK SCOS MJATxxx MNATxxx pcos rels rsnk SIZExxxx
RSUxx BN [BILLING_DN] HCMK[xxxx/='name'] BGRP[BGRP] +OPT
or
ADD HGRP[HGRP_NUM] ALT/LINK CSNKxxx SSNKxxx MJATxxx MNATxxx pcos rels rsnk
SIZExxxx RSUxx BN [BILLING_DN] HCMK[xxxx/='name'] +OPT

Output parameters
None.

A_AGCS-GTD5_4008_ADD_HGRP-MEM
Adds an hunt group member. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addHGRP_MEM.
Table 40: A_AGCS-GTD5_4008_ADD_HGRP-MEM
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

50

Oracle Corporation

Commercial services service pack

Table 40: A_AGCS-GTD5_4008_ADD_HGRP-MEM


Parameter Name

Description

Range

Default
Value

Type

Class

NXX

Exchange of the DN.

LINE

Line of the DN.

HGRP_NUM

Hunt group number.

LEN

Line equipment number.

CDDC

Called party disconnect.


Required, if the SCOS is not
provided.

CGDC

Calling party disconnect.


Required, if the SCOS is not
provided.

CGND

Calling number determination.


Required, if the SCOS is not
provided.

CSNK

Charge sink. Required, if the


SCOS is not provided.

CSOU

Charge source. Required, if the


SCOS is not provided.

DPV

Digital pad value index.

DTYP

Device type.

HGM

Hunt group member.

INFO

Info digits.

PCOS

Primary class of service.

SCOS

Secondary class of service.

PERM

Permanent treatment index.

RING

Ring.

RSOU

Selective route source.

SSNK

Screen sink.

AG Communication Systems GTD-5 Cartridge Guide

51

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 40: A_AGCS-GTD5_4008_ADD_HGRP-MEM


Parameter Name

Description

Range

Default
Value

Type

Class

SSOU

Screen source.

TDS

Translation data set.

OPT

Other optional parameters.

HCMK_DIGIT

HCMK digit.

HCMK_VALUE

HCMK value.

BGRP

Business group number or


Logical conference number.

SUB_GRP

Sub group.

MML commands
ADD DN [DN] LINExxx [SCOS | cddc cgdc cgnd CSNKxxx CSOUxxx] DPVxx dtyp
HGM[HGRP_NUM].[HGM] INFO pcos PERMxx RING RSOUxxx SSNKxxx SSOUxxx TDSxxxx
HCMK[xxxx/='name'] BGRP[BGRP].SUB_GRP +OPT

Note: [HGM] will be the member number of the line added. [HGRP_NUM] is the hunt group
number to which the member is added.

Output parameters
None.

A_AGCS-GTD5_4008_ADD_INFO-DIGIT
Adds the info digits. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addINFO_DIGIT.
Table 41: A_AGCS-GTD5_4008_ADD_INFO-DIGIT
Parameter Name
MCLI

52

Oracle Corporation

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

Commercial services service pack

Table 41: A_AGCS-GTD5_4008_ADD_INFO-DIGIT


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

INFO_DIGIT

Information digit.

0 - 63

MML commands
CHAN DN [DN] INFO<INFO_DIGIT>

Output parameters
None.

A_AGCS-GTD5_4008_ADD_LDDA
Adds the long distance distinctive ringing and/or distinctive call waiting tone. It is
implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addLDDA.
Table 42: A_AGCS-GTD5_4008_ADD_LDDA
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

53

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 42: A_AGCS-GTD5_4008_ADD_LDDA


Parameter Name

Description

Range

Default
Value

Type

Class

LINE

Line of the DN.

LDDA_DRIN

Long distance distinctive


Y/N
alerting active. DRIN will be
sent when LDDA_DRIN=Y and
NDRI will be sent when
LDDA_DRIN=N.

LDDA_DTON

Long distance distinctive call


waiting tone active.

DTON,
NDTO
or
ODTO

MML commands
CHAN DN [DN] LDDA.[DRIN|NDRI].[ DTON|NDTO|ODTO]

Note: DRIN will be sent when LDDA_DRIN=Y and NDRI will be sent when
LDDA_DRIN=N.

Output parameters
None.

A_AGCS-GTD5_4008_ADD_LINE
Adds a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addLINE.
Table 43: A_AGCS-GTD5_4008_ADD_LINE
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

54

Oracle Corporation

Commercial services service pack

Table 43: A_AGCS-GTD5_4008_ADD_LINE


Parameter Name

Description

Range

Default
Value

Type

Class

NXX

Exchange of the DN.

LINE

Line of the DN.

LEN

Line equipment number.

PCOS

Primary class of service.

SCOS

Secondary class of service.

CDDC

Called party disconnect.


Required, if the SCOS is not
provided.

CGDC

Calling party disconnect.


Required, if the SCOS is not
provided.

CGND

Calling number determination.


Required, if the SCOS is not
provided.

CSNK

Charge sink. Required, if the


SCOS is not provided.

CSOU

Charge source. Required, if the


SCOS is not provided.

INFO

Info digits.

RSOU

Selective route source.

SSNK

Screen sink.

SSOU

Screen source.

TDS

Translation data set.

HCMK_DIGIT

HCMK digit.

HCMK_VALUE

HCMK value.

OPT

Other options.

AG Communication Systems GTD-5 Cartridge Guide

55

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 43: A_AGCS-GTD5_4008_ADD_LINE


Parameter Name

Description

Range

Default
Value

Type

Class

BGRP

Business group number or


Logical conference number.

SUB_GRP

Sub group.

MML commands
ADD DN [DN] [SCOS | cddc cgdc cgnd CSNKxxx CSOUxxx] INFOxx pcos RSOUxxx
SSNKxxx SSOUxxx TDSxxxx HCMK[xxxx/='name'] BGRP[BGRP].[SUB_GRP] +OPT

Output parameters
None.

A_AGCS-GTD5_4008_ADD_LNR
Adds the last number redial feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addLNR.
Table 44: A_AGCS-GTD5_4008_ADD_LNR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] RND

56

Oracle Corporation

Commercial services service pack

Output parameters
None.

A_AGCS-GTD5_4008_ADD_LSM
Adds the line supervision method. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addLSM.
Table 45: A_AGCS-GTD5_4008_ADD_LSM
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

LSM_TYPE

LSM type.

MML commands
CHAN DN [DN] [LSM_TYPE]

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

57

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_MWI
Adds the message waiting - shutter dial tone, visual, audible. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addMWI.
Table 46: A_AGCS-GTD5_4008_ADD_MWI
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MWI_AUDIBLE

Specifies whether audible MWI Y/N


is allowed.

MWI_VISUAL

Specifies whether allow visual


MWI is allowed.

Y/N

MWI_BOTH

Specifies whether both audible


and visual MWI are allowed.

Y/N

MWI_PRA

Set periodic ringing.


0 = No alert
1 = 15-minute alert
2 = 30-minute alert
3 = 45-minute alert
4 = 60-minute alert

0-4

MML commands
CHAN DN [DN] MWIM.PRAA.ARMW
MWIM = MWIA if MWI_AUDIBLE is Y
= MWIV if MWI_VISUAL is Y
= MWIB if MWI_BOTH is Y
PRAA = PRA<MWI_PRA>

58

Oracle Corporation

Commercial services service pack

Output parameters
None.

A_AGCS-GTD5_4008_ADD_ORG-DDIAL
Adds the originator denied 10XXX or 101XXXX dialing feature to a line. It is implemented
by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addORG_DDIAL.
Table 47: A_AGCS-GTD5_4008_ADD_ORG-DDIAL
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] DCXR

Output parameters
None.

A_AGCS-GTD5_4008_ADD_PARK
Adds the call park feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addPARK.
Table 48: A_AGCS-GTD5_4008_ADD_PARK
Parameter Name
MCLI

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

AG Communication Systems GTD-5 Cartridge Guide

59

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 48: A_AGCS-GTD5_4008_ADD_PARK


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] PARK

Output parameters
None.

A_AGCS-GTD5_4008_ADD_PERM
Sets the permanent treatment index feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addPERM.
Table 49: A_AGCS-GTD5_4008_ADD_PERM
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

PERM_ID

Permanent treatment index.

60

Oracle Corporation

0 - 15

Commercial services service pack

MML commands
CHAN DN [DN] PERM<PERM_INDEX>

Output parameters
None.

A_AGCS-GTD5_4008_ADD_PILOT-LINE
Adds a pilot line to an hunt group. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addPilotLine.
Table 50: A_AGCS-GTD5_4008_ADD_PILOT-LINE
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

HGRP_NUM

Hunt group number.

MML commands
ADD DN [DN] HGRP[HGRP_NUM]

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

61

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_RSU
Adds a group for survivability. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addRSU.
Table 51: A_AGCS-GTD5_4008_ADD_RSU
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

RSU_DIGIT

RSU digit.

MML commands
CHAN HGRP [DN] RSUxx

Output parameters
None.

A_AGCS-GTD5_4008_ADD_SC30
Adds the speed call 30 feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSC30.
Table 52: A_AGCS-GTD5_4008_ADD_SC30
Parameter Name
MCLI

62

Oracle Corporation

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

Commercial services service pack

Table 52: A_AGCS-GTD5_4008_ADD_SC30


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

SC3_F

Speed call 30 fixed.

Y/N

SC3_V

Speed call 30 variable.

Y/N

MML commands
CHAN DN [DN] SC3F|SC3V

Output parameters
None.

A_AGCS-GTD5_4008_ADD_SC8
Adds the speed call 8 feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSC8.
Table 53: A_AGCS-GTD5_4008_ADD_SC8
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

63

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 53: A_AGCS-GTD5_4008_ADD_SC8


Parameter Name

Description

LINE

Line of the DN.

SC8_F

Speed call 8 fixed.

SC8_V

Speed call 8 variable.

Range

Default
Value

Type

Class

Y/N

Y/N

MML commands
CHAN DN [DN] SC8F|SC8V

Output parameters
None.

A_AGCS-GTD5_4008_ADD_SCA
Adds the selective call acceptance feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSCA.
Table 54: A_AGCS-GTD5_4008_ADD_SCA
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] SCAI

64

Oracle Corporation

Commercial services service pack

Output parameters
None.

A_AGCS-GTD5_4008_ADD_SCF
Adds the selective call forwarding feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSCF.
Table 55: A_AGCS-GTD5_4008_ADD_SCF
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

DSVI_ACT

Y/N
Specifies whether call
forwarding can be activated by a
customer-dialed code.

DSVI_REM

Maximum number of
simultaneous calls that can be
forwarded.

DSVI_TODA

Y/N
Call forwarding all calls fixed
can be activated by time of day/
day of week basis.

DSVI_ESCF

Enhanced selective call


forwarding.

0 - 255

Y/N

MML commands
CHAN DN [DN] DSVI.<DSVI_ACT>.<DSVI_REM>.DSVI_TODA.[ESCF|NESF]

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

65

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_SCR
Adds the selective call reject feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSCR.
Table 56: A_AGCS-GTD5_4008_ADD_SCR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] SCRI

Output parameters
None.

A_AGCS-GTD5_4008_ADD_SCW
Adds the selective call waiting feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSCW.
Table 57: A_AGCS-GTD5_4008_ADD_SCW
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

66

Oracle Corporation

Commercial services service pack

Table 57: A_AGCS-GTD5_4008_ADD_SCW


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] SECW

Output parameters
None.

A_AGCS-GTD5_4008_ADD_SET-CCF
Sets the custom calling feature on a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSET_CCF.
Table 58: A_AGCS-GTD5_4008_ADD_SET-CCF
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number. Must


include HRGP_NUM or either
DN or NPA (if 10-digit switch),
NXX, and LINE.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

67

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 58: A_AGCS-GTD5_4008_ADD_SET-CCF


Parameter Name

Description

Range

Default
Value

Type

Class

FWD_DN

Forward Directory Number.


Must include either DN or NPA
(if 10-digit switch), NXX, and
LINE

FWD_NPA

Area code of the FWD_DN.

FWD_NXX

Exchange of the FWD_DN.

FWD_LINE

Line of the FWD_DN.

CCF_DDAF

Specifies whether call


forwarding all calls fixed is
enabled.

Y/N

CCF_DBYF

Specifies whether shared call


forwarding, busy line fixed
digits is enabled.

Y/N

CCF_DANF

Specifies whether sall


forwarding no answer, fixed is
enabled.

Y/N

CCF_DBGF

Specifies whether group call


Y/N
forwarding busy line fixed digits
is enabled.

CCF_DGDF

Specifies whether group call


forwarding all calls fixed digits
is enabled.

Y/N

CCF_MWIA

Specifies whether the message


waitng indicator is enabled.

Y/N

MML commands
SET CCF DN [DN] MWIA=[ACTI|DEAC]DDAF=[FWD_DN] DBYF=[FWD_DN] DANF=[FWD_DN]
SET CCF HGRP [HGRP_NUM] DANF=[FWD_DN] DBYF=[FWD_DN] DDAF=[FWD_DN]
DGDF=[FWD_DN] DBGF=[FWD_DN]

Output parameters
None.

68

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_SET-TDP
Sets one or more triggers for AIN interaction. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSET_TDP.
Table 59: A_AGCS-GTD5_4008_ADD_SET-TDP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

CTYPE

Call Type:

DATA data
VOIC voice
VODA both voice and data

AG Communication Systems GTD-5 Cartridge Guide

69

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 59: A_AGCS-GTD5_4008_ADD_SET-TDP


Parameter Name
TTYPE

Description

Range

Trigger Type:

Default
Value

Type

Class

FSAV - Facility selected


and available trigger
OAAU - Origination
attempt authorized trigger
OBSY - Originating called
party busy trigger
OHD - Off-hook delay
trigger
OHI - Off-hook immediate
trigger
ONAN - Originating no
answer trigger
TBSY - Terminating busy
trigger
TMAT - Termination
attempt trigger
TNAN - Terminating no
answer trigger

TINDEX

Trigger index.

1 - 255

TACI

Specifies whether the trigger is


active.

Y/N

MML commands
SET TDP DN [DN] <CTYPE> <TTYPE>.<TINDEX>.<TACI>

Output parameters
None.

70

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_SNR
Adds the saved number redial feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSNR.
Table 60: A_AGCS-GTD5_4008_ADD_SNR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] RNS

Output parameters
None.

A_AGCS-GTD5_4008_ADD_SR-DR
Adds the smart ring distinctive ringing feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSR_DR.
Table 61: A_AGCS-GTD5_4008_ADD_SR-DR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

71

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 61: A_AGCS-GTD5_4008_ADD_SR-DR


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

SEC_DN

Secondary directory number.


Must include either SEC_DN or
SEC_NPA (if 10-digit switch),
SEC_NXX, and SEC_LINE, or
HGRP_NUM.

SEC_NPA

Area code of the SEC_DN.

SEC_NXX

Exchange of the SEC_DN.

SEC_LINE

Line of the SEC_DN.

DRNG

Distinctive ringing class.

1/2/3

MML commands
CHAN DN [DN] DRDN=[SEC_DN] DRG<DRNG>

Output parameters
None.

A_AGCS-GTD5_4008_ADD_SSO
Adds the special screening on origination feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSSO.
Table 62: A_AGCS-GTD5_4008_ADD_SSO
Parameter Name
MCLI

72

Oracle Corporation

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

Commercial services service pack

Table 62: A_AGCS-GTD5_4008_ADD_SSO


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN]SSO

Output parameters
None.

A_AGCS-GTD5_4008_ADD_TDP
Adds the trigger detection point provisioning. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addTDP.
Table 63: A_AGCS-GTD5_4008_ADD_TDP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

73

Chapter 3: Atomic Service Description Layer (ASDL) Commands

MML commands
CHAN DN [DN] TDP

Output parameters
None.

A_AGCS-GTD5_4008_ADD_TDS
Adds the translation set data. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addTDS.
Table 64: A_AGCS-GTD5_4008_ADD_TDS
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

TDS_DIGIT

TDS digit.

MML commands
CHAN DN [DN] TDSxx

Output parameters
None.

74

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_TEMP-DC
Enables a temporary disconnect feature on a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addTEMP_DC.
Table 65: A_AGCS-GTD5_4008_ADD_TEMP-DC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] TPD

Output parameters
None.

A_AGCS-GTD5_4008_ADD_TRDP
Adds a translation detection point. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addTRDP.
Table 66: A_AGCS-GTD5_4008_ADD_TRDP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

75

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 66: A_AGCS-GTD5_4008_ADD_TRDP


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

TCT_AFR

Automatic flexible routing.

Y/N

TCT_CUAC

Customized access code.

Y/N

TCT_CUIC

Customized intercom.

Y/N

TCT_DIG3

Three-digit trigger.

Y/N

TCT_DIG4

Four-digit trigger.

Y/N

TCT_DIG5

Five-digit trigger.

Y/N

TCT_DIG6

Six-digit trigger.

Y/N

TCT_DIG8

Eight-digit trigger.

Y/N

TCT_DIGA

Ten-digit trigger.

Y/N

TCT_LNP

Local number portability


trigger.

Y/N

TCT_N11

N11 trigger.

Y/N

TCT_VERT

Vertical service code trigger.

Y/N

TRDP_INDEX

The trigger criteria index.

1 - 255

TACI

Specifies whether the trigger is


active.

Y/N

MML commands
SET TRDP DN [DN] VOIC.tct.index.taci

Output parameters
None.

76

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_TWC
Adds the three way calling feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addTWC.
Table 67: A_AGCS-GTD5_4008_ADD_TWC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

TWC_REST

Specifies whether 3-way calling


is to be restricted.

TWC_TMET

TCOM = Restrict
completely.
TDGR = Last in Group
(Hunt groups only).
TNON = No restrictions.
TONT = No TWC, only call
transfer.

TDIS - Transfer on disconnect


or explicit request. TEXP Transfer on explicit request
only.

MML commands
CHAN DN [DN] TWC[.<TWC_REST>][.<TWC_TMET>]

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

77

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_UACL
Adds the various usages assignable feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addUACL.
Table 68: A_AGCS-GTD5_4008_ADD_UACL
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

UACL_ACBC

Specifies whether Usage


Assignable Auto-callback is
enabled.

Y/N

UACL_ARCC

Specifies whether Usage


Assignable Auto-recall is
enabled.

Y/N

UACL_COTR

Specifies whether Usage


Assignable Call Trace is
enabled.

Y/N

MML commands
CHAN DN [DN] UACL[.ACBC[.ARCC[.COTR]]]

Output parameters
None.

78

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_UACN
Adds the usage assignable calling name/number feature to a line. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addUACN.
Table 69: A_AGCS-GTD5_4008_ADD_UACN
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

UACN_CNAB

Specifies whether calling name


delivery blocking is enabled.

Y/N

UACN_CNAM

Specifies whether calling name


delivery usage assignable is
enabled.

Y/N

UACN_CNDB

Y/N
Specifies whether calling
number delivery blocking usage
assignable is enabled.

UACN_CNDE

Specifies whether calling


number delivery usage
assignable is enabled.

Y/N

MML commands
CHAN DN [DN] UACN.CNAB.CNAM.CNDB.CNDE

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

79

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_ADD_UANC
Adds various assignable usages to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addUANC.
Table 70: A_AGCS-GTD5_4008_ADD_UANC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

UANC_CSMI

Specifies whether VMS call


screening usage is assignable.

Y/N

UANC_CLJ

Specifies whether call join


subscription is assignable.

Y/N

UANC_DND

Specifies whether the do not


disturb subscription is
assignable.

Y/N

UANC_WUP

Specifies whether the wake-up/


reminder subscription is
assignable.

Y/N

UANC_TWC

Specifies whether three-way


calling usage is assignable.

Y/N

MML commands
CHAN DN [DN] UANC[.CSMI[.DND[.TWC|.NTWC[.WUPR]]]]

Output parameters
None.

80

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_ADD_UCD
Adds the uniform call distribution. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addUCD.
Table 71: A_AGCS-GTD5_4008_ADD_UCD
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
CHAN HGRP [HGRP_NUM] UCD

Output parameters
None.

A_AGCS-GTD5_4008_ADD_UCR
Adds an unidentified call rejection feature to a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addUCR.
Table 72: A_AGCS-GTD5_4008_ADD_UCR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] UCRI

AG Communication Systems GTD-5 Cartridge Guide

81

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Output parameters
None.

A_AGCS-GTD5_4008_ADD_URCL
Adds various recordable usages. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addURCL.
Table 73: A_AGCS-GTD5_4008_ADD_URCL
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

URCL_ACBC

Specifies whether automatic


call-back calling usage is
recordable.

Y/N

URCL_ARCC

Specifies whether automatic


recall usage is recordable.

Y/N

URCL_COTR

Specifies whether customer


originated trace usage is
recordable.

Y/N

URCL_CWDC

Specifies whether call waiting


deluxe conference usage is
recordable.

Y/N

URCL_UCRI

Specifies whether unidentified


call rejection usage is
assignable.

Y/N

82

Oracle Corporation

Commercial services service pack

MML commands
CHAN DN [DN] URCL[.ACBC[.ARCC[.COTR[.CWDC[.UCRI]]]]]

Output parameters
None.

A_AGCS-GTD5_4008_ADD_URCN
Adds the various recordable usages. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addURCN.
Table 74: A_AGCS-GTD5_4008_ADD_URCN
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

URCN_CLND

Specifies whether calling name


delivery usage is recordable.

Y/N

URCN_CNAB

Specifies whether the calling


name delivery blocking usage is
recordable.

Y/N

URCN_CNDB

Y/N
Specifies whether the calling
number delivery blocking usage
is recordable.

URCN_CNDE

Specifies whether the calling


number delivery usage is
recordable.

Y/N

MML commands
CHAN DN [DN] URCN[.CLND[.CNAB[.CNDB[.CNDE]]]]

AG Communication Systems GTD-5 Cartridge Guide

83

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Output parameters
None.

A_AGCS-GTD5_4008_ADD_URNC
Adds the various recordable usages. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addURNC.
Table 75: A_AGCS-GTD5_4008_ADD_URNC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

URNC_CLJN

Call join usage recordable.

Y/N

URNC_CSMI

VMS call screening usage


recordable.

Y/N

URNC_DND

Do not disturb usage recordable. Y/N

URNC_TWC

Three way calling usage


recordable.

Y/N

URNC_WUPR

Wake-up or remainder usage


recordable.

Y/N

MML commands
CHAN DN [DN] URNC [.CSMI|NCSM[.CLJN|NCLJ[.DND|NCND [.TWC| NTWC[.WUPR|
NWUP]]]]]

Output parameters
None.

84

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_DEL_ACB
Deletes the auto call back feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delACB.
Table 76: A_AGCS-GTD5_4008_DEL_ACB
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NACB

Output parameters
None.

A_AGCS-GTD5_4008_DEL_ACB-CLASS
Deletes the CLASS - auto call back feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delACB_CLASS.
Table 77: A_AGCS-GTD5_4008_DEL_ACB-CLASS
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

85

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 77: A_AGCS-GTD5_4008_DEL_ACB-CLASS


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NCBD

Output parameters
None.

A_AGCS-GTD5_4008_DEL_AR
Deletes the automatic recall feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delAR.
Table 78: A_AGCS-GTD5_4008_DEL_AR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NARC

86

Oracle Corporation

Commercial services service pack

Output parameters
None.

A_AGCS-GTD5_4008_DEL_ATWC
Deletes the always available usage sensitive three-way calling feature. It is implemented by
the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delATWC.
Table 79: A_AGCS-GTD5_4008_DEL_ATWC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NATW

Output parameters
None.

A_AGCS-GTD5_4008_DEL_BLOCK-PC
Deletes the prefix call blocking feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delBLOCK_PC.
Table 80: A_AGCS-GTD5_4008_DEL_BLOCK-PC
Parameter Name
MCLI

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

AG Communication Systems GTD-5 Cartridge Guide

87

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 80: A_AGCS-GTD5_4008_DEL_BLOCK-PC


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

BIDD

Do not Block 011+ dialing?

BIE3

Do not Block 01+ dialing?

BZMS

Do not Block 0- dialing?

BZZM

Do not Block 00- dialing?

B0PS

Do not Block 0+ dialing?

B1PS

Do not Block 1+ dialing?

BLKP

Do not Block prefix calls

MML commands
CHAN DN [DN] BLKP.[NBID.[NBIE.[NBZM.[NBZZ.[NB0P.[NB1P]]]]]]

Output parameters
None.

88

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_DEL_BLOCK-TCT
Deletes the translation call type blocking feature from a line. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delBLOCK_TCT.
Table 81: A_AGCS-GTD5_4008_DEL_BLOCK-TCT
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

B556

Do not Block 556 calls.

Y/N

B700

Do not Block 700 calls.

Y/N

B900

Do not Block 900 calls.

Y/N

B976

Do not Block 976 calls.

Y/N

BLDA

Do not block local directory


assistance calls.

Y/N

BLKT

Do not block translation call


type calls.

Y/N

MML commands
CHAN DN [DN] BLKT[.N556[.N700[.N900[.N976[.NLDA]]]]]

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

89

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_DEL_CALL-PICKUP
Deletes the call pickup - directed or group or extended feature from a line. It is implemented
by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCALL_PICKUP.
Table 82: A_AGCS-GTD5_4008_DEL_CALL-PICKUP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NPIC

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL
Deletes the caller ID block per line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCALLER_ID_BLK_PL.
Table 83: A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

90

Oracle Corporation

Commercial services service pack

Table 83: A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NCND

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CALLING-NN
Deletes the calling name and number delivery. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCALLING_NN.
Table 84: A_AGCS-GTD5_4008_DEL_CALLING-NN
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

CLND

Calling name delivery.

Y/N

CNDE

Calling number delivery.

Y/N

AG Communication Systems GTD-5 Cartridge Guide

91

Chapter 3: Atomic Service Description Layer (ASDL) Commands

MML commands
CHAN DN [DN] [NNAD] [NCAN]

Note: One of CLND and CNDE should be set to Y.

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CDGG
Deletes the control party for group features. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCDGG.
Table 85: A_AGCS-GTD5_4008_DEL_CDGG
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NCGG

Output parameters
None.

92

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_DEL_CFF-AC
Deletes the call forward fixed all calls feature from a line. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFF_AC.
Table 86: A_AGCS-GTD5_4008_DEL_CFF-AC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NAFI

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CFF-BC
Deletes the call forward fixed busy feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFF_BC.
Table 87: A_AGCS-GTD5_4008_DEL_CFF-BC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

93

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 87: A_AGCS-GTD5_4008_DEL_CFF-BC


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NBFI

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CFF-GRP-AC
Deletes the call forward group fixed all calls feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFF_GRP_AC.
Table 88: A_AGCS-GTD5_4008_DEL_CFF-GRP-AC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
CHAN HGRP[HGRP] NAFG

Output parameters
None.

94

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_DEL_CFF-GRP-BC
Deletes the call forward group fixed busy calls feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFF_GRP_BC.
Table 89: A_AGCS-GTD5_4008_DEL_CFF-GRP-BC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
CHAN HGRP[HGRP] NBFG

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CFF-UC
Deletes the call forward fixed - unanswered calls feature from a line. It is implemented by the
Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFF_UC.
Table 90: A_AGCS-GTD5_4008_DEL_CFF-UC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NNFI

AG Communication Systems GTD-5 Cartridge Guide

95

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CFV-AC
Deletes the call forward variable all calls feature from a line. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_AC.
Table 91: A_AGCS-GTD5_4008_DEL_CFV-AC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NAVI

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CFV-BC
Deletes the call forward variable Busy calls feature from a line. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_BC.
Table 92: A_AGCS-GTD5_4008_DEL_CFV-BC
Parameter Name
MCLI

96

Oracle Corporation

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

Commercial services service pack

Table 92: A_AGCS-GTD5_4008_DEL_CFV-BC


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NBVI

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CFV-GRP-AC
Deletes the call forward group all feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_GRP_AC.
Table 93: A_AGCS-GTD5_4008_DEL_CFV-GRP-AC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
CHAN HGRP[HGRP_NUM] NAVG

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

97

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_DEL_CFV-GRP-BC
Deletes the call forward group variable Busy calls feature. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_GRP_BC.
Table 94: A_AGCS-GTD5_4008_DEL_CFV-GRP-BC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
CHAN HGRP[HGRP] NBVG

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC
Deletes the call forward group shared variable busy calls feature. It is implemented by the Java
method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_GRPSH_BC.
Table 95: A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
CHAN HGRP[HGRP] NBVS

Output parameters
None.

98

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC
Deletes the call forward group shared variable unanswered calls feature. It is implemented by
the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_GRPSH_UC.
Table 96: A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
CHAN HGRP[HGRP] NNVS

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CFV-UC
Deletes the call forward variable unanswered calls feature from a line. It is implemented by the
Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_UC.
Table 97: A_AGCS-GTD5_4008_DEL_CFV-UC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

99

Chapter 3: Atomic Service Description Layer (ASDL) Commands

MML commands
CHAN DN [DN] NNVI

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CH
Deletes the call hold feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCH.
Table 98: A_AGCS-GTD5_4008_DEL_CH
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NHLD

Output parameters
None.

100

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_DEL_COT
Deletes the customer originated trace feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCOT.
Table 99: A_AGCS-GTD5_4008_DEL_COT
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NCOT

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CW
Deletes the call waiting feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCW.
Table 100: A_AGCS-GTD5_4008_DEL_CW
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

101

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 100: A_AGCS-GTD5_4008_DEL_CW


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NCWT

Output parameters
None.

A_AGCS-GTD5_4008_DEL_CWO
Deletes the call waiting originating feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCWO.
Table 101: A_AGCS-GTD5_4008_DEL_CWO
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NCWO

102

Oracle Corporation

Commercial services service pack

Output parameters
None.

A_AGCS-GTD5_4008_DEL_DCW
Deletes the distinctive call waiting feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delDCW.
Table 102: A_AGCS-GTD5_4008_DEL_DCW
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NDRC

Output parameters
None.

A_AGCS-GTD5_4008_DEL_DP
Deletes the dial pulse. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delDP.
Table 103: A_AGCS-GTD5_4008_DEL_DP
Parameter Name
MCLI

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

AG Communication Systems GTD-5 Cartridge Guide

103

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 103: A_AGCS-GTD5_4008_DEL_DP


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] SPTC

Output parameters
None.

A_AGCS-GTD5_4008_DEL_DR
Disables the distinctive ring. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delDR.
Table 104: A_AGCS-GTD5_4008_DEL_DR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
CHAN HGRP[HGRP_NUM] SUBG1

Output parameters
None.

104

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_DEL_DS
Deletes the data security. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delDS.
Table 105: A_AGCS-GTD5_4008_DEL_DS
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NDAD

Output parameters
None.

A_AGCS-GTD5_4008_DEL_DTM
Deletes the denied termination feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delDTM.
Table 106: A_AGCS-GTD5_4008_DEL_DTM
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

105

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 106: A_AGCS-GTD5_4008_DEL_DTM


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NDTM

Output parameters
None.

A_AGCS-GTD5_4008_DEL_FLAS
Unsets the on hook treatment field. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delFLAS.
Table 107: A_AGCS-GTD5_4008_DEL_FLAS
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NONH

106

Oracle Corporation

Commercial services service pack

Output parameters
None.

A_AGCS-GTD5_4008_DEL_HGRP
Deletes an hunt group. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delHGRP.
Table 108: A_AGCS-GTD5_4008_DEL_HGRP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
DELE HGRP[HGRP_NUM]

Output parameters
None.

A_AGCS-GTD5_4008_DEL_ICID
Deletes the Intra LATA PIC. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delICID.
Table 109: A_AGCS-GTD5_4008_DEL_ICID
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

107

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 109: A_AGCS-GTD5_4008_DEL_ICID


Parameter Name

Description

LINE

Range

Default
Value

Line of the DN.

Type
S

Class
O

MML commands
CHAN DN [DN] NICI

Output parameters
None.

A_AGCS-GTD5_4008_DEL_LDDA
Deletes the long distance distinctive ringing and/or distinctive call waiting tone. It is
implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delLDDA.
Table 110: A_AGCS-GTD5_4008_DEL_LDDA
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NLDD

Output parameters
None.

108

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_DEL_LINE
Deletes a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delLINE.
Table 111: A_AGCS-GTD5_4008_DEL_LINE
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

DLSM

One of the following:

TDLI

No originations allowed
(DL)
Originations allowed to
select terminations (LI)

One of the following:

Changed number intercept


(CN)
Vacant number (VN)
Intercept center (IC)
Unused directory number
study (US)

BGRP

Business group number or


Logical conference number.

LLNP

One of the following:

Left by LNP number


pooling (LLNP)
Not left by LNP number
pooling (NLLN)

AG Communication Systems GTD-5 Cartridge Guide

109

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 111: A_AGCS-GTD5_4008_DEL_LINE


Parameter Name

Description

PORT

Ported out.

Range

Default
Value

Y/N

Type
S

Class
O

MML commands
DELE DN [DN] <DLSM> <TDLI> <BGRP> <LLNP> <PORT>

Output parameters
None.

A_AGCS-GTD5_4008_DEL_LNR
Deletes the last number redial feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delLNR.
Table 112: A_AGCS-GTD5_4008_DEL_LNR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NRND

Output parameters
None.

110

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_DEL_MWI
Deletes the message waiting - shutter dial tone or visual or audible ring feature from a line. It
is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delMWI.
Table 113: A_AGCS-GTD5_4008_DEL_MWI
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NMWI

Output parameters
None.

A_AGCS-GTD5_4008_DEL_ORG-DDIAL
Deletes the originator denied 10XXX or 101XXXX dialing feature. It is implemented by the
Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delORG_DDIAL.
Table 114: A_AGCS-GTD5_4008_DEL_ORG-DDIAL
Parameter Name
MCLI

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

AG Communication Systems GTD-5 Cartridge Guide

111

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 114: A_AGCS-GTD5_4008_DEL_ORG-DDIAL


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NDCX

Output parameters
None.

A_AGCS-GTD5_4008_DEL_PARK
Deletes the call park feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delPARK.
Table 115: A_AGCS-GTD5_4008_DEL_PARK
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

112

Oracle Corporation

Commercial services service pack

MML commands
CHAN DN [DN] NPAR

Output parameters
None.

A_AGCS-GTD5_4008_DEL_SC30
Deletes the speed call 30 feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSC30.
Table 116: A_AGCS-GTD5_4008_DEL_SC30
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

SC3_F

Speed call 30 fixed.

Y/N

SC3_V

Speed call 30 variable.

Y/N

MML commands
CHAN DN [DN] NS3F|NS3V

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

113

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_DEL_SC8
Deletes the speed call 8 feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSC8.
Table 117: A_AGCS-GTD5_4008_DEL_SC8
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

SC8_F

Speed call 8 fixed.

Y/N

SC8_V

Speed call 8 variable.

Y/N

MML commands
CHAN DN [DN] NS8F|NS8V

Output parameters
None.

A_AGCS-GTD5_4008_DEL_SCA
Deletes the selective call acceptance feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSCA.
Table 118: A_AGCS-GTD5_4008_DEL_SCA
Parameter Name
MCLI

114

Oracle Corporation

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

Commercial services service pack

Table 118: A_AGCS-GTD5_4008_DEL_SCA


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NSCA

Output parameters
None.

A_AGCS-GTD5_4008_DEL_SCF
Deletes the selective call forwarding feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSCF.
Table 119: A_AGCS-GTD5_4008_DEL_SCF
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

115

Chapter 3: Atomic Service Description Layer (ASDL) Commands

MML commands
CHAN DN [DN] NSVI

Output parameters
None.

A_AGCS-GTD5_4008_DEL_SCR
Deletes the selective call reject. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSCR.
Table 120: A_AGCS-GTD5_4008_DEL_SCR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NSCR

Output parameters
None.

116

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_DEL_SCW
Deletes the selective call waiting feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSCW.
Table 121: A_AGCS-GTD5_4008_DEL_SCW
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NSCW

Output parameters
None.

A_AGCS-GTD5_4008_DEL_SET-TDP
Clears the AIN trigger. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSET_TDP.
Table 122: A_AGCS-GTD5_4008_DEL_SET-TDP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

117

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 122: A_AGCS-GTD5_4008_DEL_SET-TDP


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CLEA TDP DN [DN]

Output parameters
None.

A_AGCS-GTD5_4008_DEL_SNR
Deletes the saved number redial feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSNR.
Table 123: A_AGCS-GTD5_4008_DEL_SNR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NRNS

118

Oracle Corporation

Commercial services service pack

Output parameters
None.

A_AGCS-GTD5_4008_DEL_SR-DR
Deletes the smart ring distinctive ringing feature from a line. It is implemented by the Java
method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSR_DR.
Table 124: A_AGCS-GTD5_4008_DEL_SR-DR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NDRD NDRG

Output parameters
None.

A_AGCS-GTD5_4008_DEL_SSO
Deletes the special screening on the origination feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSSO.
Table 125: A_AGCS-GTD5_4008_DEL_SSO
Parameter Name
MCLI

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

AG Communication Systems GTD-5 Cartridge Guide

119

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 125: A_AGCS-GTD5_4008_DEL_SSO


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN]NSSO

Output parameters
None.

A_AGCS-GTD5_4008_DEL_TDP
Deletes the trigger detection point. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delTDP.
Table 126: A_AGCS-GTD5_4008_DEL_TDP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

120

Oracle Corporation

Commercial services service pack

MML commands
CHAN DN [DN] NTDP

Output parameters
None.

A_AGCS-GTD5_4008_DEL_TDS
Deletes the translation set data. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delTDS.
Table 127: A_AGCS-GTD5_4008_DEL_TDS
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
N/A

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

121

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_DEL_TEMP-DC
Disables a temporary disconnect feature. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delTEMP_DC.
Table 128: A_AGCS-GTD5_4008_DEL_TEMP-DC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NTPD

Output parameters
None.

A_AGCS-GTD5_4008_DEL_TRDP
Deletes a translation detection point. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delTRDP.
Table 129: A_AGCS-GTD5_4008_DEL_TRDP
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

122

Oracle Corporation

Commercial services service pack

Table 129: A_AGCS-GTD5_4008_DEL_TRDP


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CLEA TRDP DN [DN]

Output parameters
None.

A_AGCS-GTD5_4008_DEL_TWC
Deletes the three way calling feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delTWC.
Table 130: A_AGCS-GTD5_4008_DEL_TWC
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

MML commands
CHAN DN [DN] NTWC

AG Communication Systems GTD-5 Cartridge Guide

123

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Output parameters
None.

A_AGCS-GTD5_4008_DEL_UCD
Deletes the uniform call distribution. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delUCD.
Table 131: A_AGCS-GTD5_4008_DEL_UCD
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

MML commands
CHAN HGRP [HGRP_NUM] NUCD

Output parameters
None.

A_AGCS-GTD5_4008_DEL_UCR
Deletes an unidentified call rejection feature from a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delUCR.
Table 132: A_AGCS-GTD5_4008_DEL_UCR
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

124

Oracle Corporation

Commercial services service pack

Table 132: A_AGCS-GTD5_4008_DEL_UCR


Parameter Name

Description

LINE

Range

Default
Value

Line of the DN.

Type
S

Class
O

MML commands
CHAN DN [DN] NUCI

Output parameters
None.

A_AGCS-GTD5_4008_MOD_CID
Changes an inter LATA toll carrier. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modCID.
Table 133: A_AGCS-GTD5_4008_MOD_CID
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

CID

Intra carrier ID.

MML commands
CHAN DN [DN] CID[CID]

Output parameters
None.

AG Communication Systems GTD-5 Cartridge Guide

125

Chapter 3: Atomic Service Description Layer (ASDL) Commands

A_AGCS-GTD5_4008_MOD_DN
Changes a telephone number. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modDN.
Table 134: A_AGCS-GTD5_4008_MOD_DN
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

NEW_DN

New directory number. Must


include either NEW_DN or
NEW_NPA (if 10-digit switch),
NEW_NXX, and NEW_LINE,
or HGRP_NUM.

NEW_NPA

Area code of the new DN.

NEW_NXX

Exchange of the new DN.

NEW_LINE

Line of the new DN.

MML commands
CHAN DN [DN] TO [NEW_DN]

Output parameters
None.

126

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_MOD_HG-SIZE
Changes the hunt group size. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modHG_SIZE.
Table 135: A_AGCS-GTD5_4008_MOD_HG-SIZE
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

HGRP_NUM

Hunt group number.

SIZE

New size of the group.

MML commands
CHAN HGRP[HGRP] SIZE[SIZE]

Output parameters
None.

A_AGCS-GTD5_4008_MOD_ICID
Changes the intra LATA toll carrier. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modICID.
Table 136: A_AGCS-GTD5_4008_MOD_ICID
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

ICID

Inter Carrier ID.

AG Communication Systems GTD-5 Cartridge Guide

127

Chapter 3: Atomic Service Description Layer (ASDL) Commands

MML commands
CHAN DN [DN] ICID[ICID]

Output parameters
None.

A_AGCS-GTD5_4008_MOD_INTERCEPT
Modifies an intercept. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modINTERCEPT.
Table 137: A_AGCS-GTD5_4008_MOD_INTERCEPT
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

INTERCEPT_NAME

Intercept name.

MML commands
CHAN DN [DN] [INTERCEPT_NAME]

Output parameters
None.

128

Oracle Corporation

Commercial services service pack

A_AGCS-GTD5_4008_MOD_SCOS
Modifies the SCOS and optionally PCOS on a line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modSCOS.
Table 138: A_AGCS-GTD5_4008_MOD_SCOS
Parameter Name

Description

Range

Default
Value

Type

Class

MCLI

Remote network element name.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

SCOS

Secondary class of service.

PCOS

Primary class of service.

MML commands
CHAN DN [DN] <SCOS> [PCOS]

Output parameters
None.

A_AGCS-GTD5_4008_MOD_SUB-GROUP
Changes the subgroup on a Line. It is implemented by the Java method
com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modSubGroup.
Table 139: A_AGCS-GTD5_4008_MOD_SUB-GROUP
Parameter Name
MCLI

Description
Remote network element name.

Range

Default
Value

Type
S

Class
R

AG Communication Systems GTD-5 Cartridge Guide

129

Chapter 3: Atomic Service Description Layer (ASDL) Commands

Table 139: A_AGCS-GTD5_4008_MOD_SUB-GROUP


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

NPA

Area code of the DN.

NXX

Exchange of the DN.

LINE

Line of the DN.

BGRP

Business group number or


Logical conference number.

SUB_GRP

Sub group.

MML commands
CHAN DN [DN] BGRP[BGRP].[SUB_GRP]

Output parameters
None.

Understanding user exit type XML files


User exit types allow cartridge developers and systems administrators to map ASDL exit
codes to one of the predefined base exit types. Base exit types determine the product behavior.
Cartridges map return codes and status values from a network element to a user defined exit
type.
Regular expressions (regex) are used to perform pattern searches on responses from network
elements. The pattern is stored in "tbl_user_err" in the SARM database. The user exit type
contains a regex pattern that is applied at runtime.
Regular expressions enable users to associate a series of responses to a specific base type. For
example, a regular expression "6." can identify a pattern where any response with the character
"6" followed by any number of characters will translate to base type of FAIL. Regular
expressions can also allow very specific searches within a response from a network element.
Regular expressions are typically compiled before being executed. Compilation produces a
binary version of the expression and ensures that the syntax of the regular expression is
correct. This compilation occurs using SACT\SADT when user exit types are deployed into

130

Oracle Corporation

Understanding user exit type XML files

ASAP. If the syntax is deemed to be incorrect during compilation, SADT displays an error
message and the deployment of the user exit type will fail.
For more information on pattern matching, refer to the ASAP Developer Reference and the
ASAP Administration Guide.
Several different messages can occur while the user enters service orders. The switch provides
error messages when the user enters a service order sequence. The switch also provides error
messages when the user confirms a service order.
> CHF $ 7224272 1 SCA $ ACT $
This Local DN is not Unique
Please Use the Full National DN
7224272
*** Error ***

To configure the ASDL exit type for each error message, you can edit the error messages and
the corresponding User defined ASDL Exit type mapped in the cartridge service model
<?xml version="1.0" encoding="UTF-8"?>
<serviceModel xmlns="http://www.metasolv.com/ServiceActivation/2003/
ServiceModel" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.metasolv.com/ServiceActivation/2003/
ServiceModel
D:\XSD\ServiceModel.xsd">
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*Broken pipe((?s).)*</searchPattern>
<userType>GTD5_IOEXCEPT</userType>
<baseType>MAINTENANCE</baseType>
<description>Broken Pipe.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*Connection to the network element lost((?s).)*
</searchPattern>
<userType>GTD5_IOEXCEPT</userType>
<baseType>MAINTENANCE</baseType>
<description>The connection to the network element lost.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>

AG Communication Systems GTD-5 Cartridge Guide

131

Chapter 3: Atomic Service Description Layer (ASDL) Commands

</neDescriptor>
<searchPattern>((?s).)*EU011((?s).)*</searchPattern>
<userType>GTD5_INVALID_NUMBER</userType>
<baseType>FAIL</baseType>
<description>Numeric parameter has invalid digit.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU020((?s).)*</searchPattern>
<userType>GTD5_OPT_PARM_MISSNG</userType>
<baseType>FAIL</baseType>
<description>Optional parameter missing.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU039((?s).)*</searchPattern>
<userType>GTD5_DUMP2DEV_PROGRS</userType>
<baseType>FAIL</baseType>
<description>Dump to device in progress.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU085((?s).)*</searchPattern>
<userType>GTD5_MEM_COMP_PROGRS</userType>
<baseType>FAIL</baseType>
<description>Memory compatction in progress.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU101((?s).)*</searchPattern>
<userType>GTD5_REQ_PARM_MISSNG</userType>
<baseType>FAIL</baseType>
<description>Required parameter was not provided.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>

132

Oracle Corporation

Understanding user exit type XML files

<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU102((?s).)*</searchPattern>
<userType>GTD5_OPT_PARM_REQRD</userType>
<baseType>FAIL</baseType>
<description>Due to data entered in the input command, a field that is
usually optional is now required.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU103((?s).)*</searchPattern>
<userType>GTD5_OPT_NOT_ALLOWED</userType>
<baseType>FAIL</baseType>
<description>An entry for an optional field is not allowed within the
context defined by other data in the command. </description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU104((?s).)*</searchPattern>
<userType>GTD5_PARM_VAL_INCRCT</userType>
<baseType>FAIL</baseType>
<description>Parameter has incorrect value.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU105((?s).)*</searchPattern>
<userType>GTD5_ENTRY_ALRDY_FND</userType>
<baseType>FAIL</baseType>
<description>The input command is an attempt to initialize data that
has already been defined. </description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU106((?s).)*</searchPattern>

AG Communication Systems GTD-5 Cartridge Guide

133

Chapter 3: Atomic Service Description Layer (ASDL) Commands

<userType>GTD5_ENTRY_NOT_FOUND</userType>
<baseType>FAIL</baseType>
<description>Attempted to change parameter that has not been added.
</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU107((?s).)*</searchPattern>
<userType>GTD5_INVLD_STATE</userType>
<baseType>FAIL</baseType>
<description>A device must be precut before it can be cutover. A device
cannot be deleted if its current status is not precut. The status of
a device cannot be changed from precut to precut, or from cutover to
cutover.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU108((?s).)*</searchPattern>
<userType>GTD5_LEN_ALRDY_ASGND</userType>
<baseType>FAIL</baseType>
<description>LEN already assigned.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU109((?s).)*</searchPattern>
<userType>GTD5_SUBEQ_INV_STATE</userType>
<baseType>FAIL</baseType>
<description>Superordinate equipment cannot be changed from cutover to
precut or from precut to unequipped without first changing subordinate
equipment to precut from cutover or unequipped from precut.
</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU110((?s).)*</searchPattern>
<userType>GTD5_PARM_INCOMPTBLE</userType>

134

Oracle Corporation

Understanding user exit type XML files

<baseType>FAIL</baseType>
<description>Feature is not compatible with existing features, or
feature has prerequisite that is not met.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU111((?s).)*</searchPattern>
<userType>GTD5_NON_EXIST_LINE</userType>
<baseType>FAIL</baseType>
<description>Attempted to add a feature to a non-existent line.
</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU112((?s).)*</searchPattern>
<userType>GTD5_PARMS_MUTU_EXCL</userType>
<baseType>FAIL</baseType>
<description>No more than one of the fields designated by quote marks
may be input on the command.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU113((?s).)*</searchPattern>
<userType>GTD5_PARM_INCORRECT</userType>
<baseType>FAIL</baseType>
<description>Parameter sent was incorrect.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU114((?s).)*</searchPattern>
<userType>GTD5_DN_ALRDY_EXIST</userType>
<baseType>FAIL</baseType>
<description>Attempted to add DN that already exists.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>

AG Communication Systems GTD-5 Cartridge Guide

135

Chapter 3: Atomic Service Description Layer (ASDL) Commands

<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU116((?s).)*</searchPattern>
<userType>GTD5_SUCCESS</userType>
<baseType>SUCCEED</baseType>
<description>Attempted to change the value of a parameter to the
already-existing value.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU118((?s).)*</searchPattern>
<userType>GTD5_REQ_PARM_MISSNG</userType>
<baseType>FAIL</baseType>
<description>Required parameter was not provided.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU120((?s).)*</searchPattern>
<userType>GTD5_RM_MEM_B4_GSIZE</userType>
<baseType>FAIL</baseType>
<description>An attempt was made to modify the parameters for a
syndrome that is not currently implemented in the system.
</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU121((?s).)*</searchPattern>
<userType>GTD5_ACT_DACT_DENIED</userType>
<baseType>FAIL</baseType>
<description>Activation or deactivation has been denied.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU122((?s).)*</searchPattern>

136

Oracle Corporation

Understanding user exit type XML files

<userType>GTD5_GSIZE_INSUFFICE</userType>
<baseType>FAIL</baseType>
<description>An attempt to add a member of a device group was made
without having enough space allocated in that device group. On the
corresponding device group command, increase the device group size
parameter</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU123((?s).)*</searchPattern>
<userType>GTD5_SEQ_NOT_CMPTBLE</userType>
<baseType>FAIL</baseType>
<description>An assignment has been made to the superordinate
equipment that is not compatible with the assignment being made on this
command. </description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU124((?s).)*</searchPattern>
<userType>GTD5_FEAT_NOTPROV_DN</userType>
<baseType>FAIL</baseType>
<description>An attempt to enter digits for a custom calling feature
was made without specifying that the Directory Number had this custom
calling feature.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU125((?s).)*</searchPattern>
<userType>GTD5_DN_NOT_EXIST</userType>
<baseType>FAIL</baseType>
<description>Attempted to delete DN that does not exist.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU126((?s).)*</searchPattern>
<userType>GTD5_SUBORD_MUST_UNQ</userType>

AG Communication Systems GTD-5 Cartridge Guide

137

Chapter 3: Atomic Service Description Layer (ASDL) Commands

<baseType>FAIL</baseType>
<description>Superordinate equipment cannot be deleted without first
deleting the subordinate equipment.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU127((?s).)*</searchPattern>
<userType>GTD5_TCUS_CONSEQ_ORD</userType>
<baseType>FAIL</baseType>
<description>TCUs must be assigned in consecutive order.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU128((?s).)*</searchPattern>
<userType>GTD5_SUPEQ_NOT_CTOVR</userType>
<baseType>FAIL</baseType>
<description>The subordinate equipment cannot be cutover without first
cutting over the superordinate equipment.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU129((?s).)*</searchPattern>
<userType>GTD5_SUBEQ_NOT_EQUIP</userType>
<baseType>FAIL</baseType>
<description>The required subordinate equipment is not equipped.
</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU130((?s).)*</searchPattern>
<userType>GTD5_MAX_DIGIT_EXCED</userType>
<baseType>FAIL</baseType>
<description>The identified parameter is limited to some number of
digit positions.</description>
</userDefinedExitType>
<userDefinedExitType>

138

Oracle Corporation

Understanding user exit type XML files

<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU144((?s).)*</searchPattern>
<userType>GTD5_ENTRY_NUM_EXCED</userType>
<baseType>FAIL</baseType>
<description>Number of entries exceeds size limit.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU148((?s).)*</searchPattern>
<userType>GTD5_TABLE_FULL</userType>
<baseType>FAIL</baseType>
<description>Some tables have maximums and one of them in support of
this command is full.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU601((?s).)*</searchPattern>
<userType>GTD5_JOB_ABORTED</userType>
<baseType>FAIL</baseType>
<description>A lack of system resources caused the job to abort.
</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU857((?s).)*</searchPattern>
<userType>GTD5_NO_PIPE_AVAILBL</userType>
<baseType>FAIL</baseType>
<description>A lack of system resources caused the job to abort.
</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>

AG Communication Systems GTD-5 Cartridge Guide

139

Chapter 3: Atomic Service Description Layer (ASDL) Commands

<searchPattern>((?s).)*EU858((?s).)*</searchPattern>
<userType>GTD5_BAD_PIPE</userType>
<baseType>FAIL</baseType>
<description>It is not possible to communicate with the device over a
pipe system. This can be caused by a processor being Out-Of-Service,
resources not being available to transfer the data, or time-out periods
being in effect. </description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*EU936((?s).)*</searchPattern>
<userType>GTD5_ACT_REQ_EXCEEDS</userType>
<baseType>FAIL</baseType>
<description>The command failed because too many jobs are active.
</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*JOB ID does not match((?s).)*</searchPattern>
<userType>GTD5_JOBID_NOT_MATCH</userType>
<baseType>FAIL</baseType>
<description>JOB ID from the NE does not match assigned JOB ID.
</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*OK DONE((?s).)*</searchPattern>
<userType>GTD5_SUCCESS</userType>
<baseType>SUCCEED</baseType>
<description>The NE command succeeded.</description>
</userDefinedExitType>
<userDefinedExitType>
<neDescriptor>
<softwareLoad>4008</softwareLoad>
<technology>GTD5</technology>
<neVendor>AGCS</neVendor>
</neDescriptor>
<searchPattern>((?s).)*Prov Prompt TimeOut:((?s).)*</searchPattern>
<userType>GTD5_TIMEOUT</userType>
<baseType>FAIL</baseType>

140

Oracle Corporation

Understanding user exit type XML files

<description>Timed out in provisioning prompt.</description>


</userDefinedExitType>
</serviceModel>

AG Communication Systems GTD-5 Cartridge Guide

141

Chapter 3: Atomic Service Description Layer (ASDL) Commands

142

Oracle Corporation

Service Definition
The AGCS GTD-5 Cartridge guide contains a set of CSDLs that map to one or more ASDL
commands. You can also create additional CSDLs that map to existing and newly-created
ASDLs. An upstream system can assemble any of these CSDL commands onto a work order
for provisioning.
This chapter presents detailed information on the CSDL parameters that we provide in this
cartridge. The following table lists and describes the type of parameter information that is
included.
Table 140: ASDL parameter information
Item

Description

Parameter Name

Identifies the parameter that is configured for the stated service.

Description

Describes the parameter.

Range

Describes or lists the range of values that can be used to satisfy this
parameter.

Default Value

Configures a default value for the parameter and not mandatory for the
upstream system to provide a value.

AG Communication Systems GTD-5 Cartridge Guide

143

Chapter 4: Service Definition

Table 140: ASDL parameter information


Item
Type

Description
Indicates one of the following parameter types:

SScalar, specifies the parameter label transmitted on the ASDL


command. Scalar parameters are conventional name-value pair
parameters.
CCompound, specifies the base name of the compound parameter
transmitted on the ASDL command. A compound parameter contains
structures or arrays of information that are represented by a particular
structure name or compound parameter name. Each compound
parameter can contain a large number of elements. If you use compound
parameters, you only require a single entry in the ASAP translation
tables to call the compound parameter and all its associated parameter
elements.
IIndexed, identifies a parameter that contains a sequential numerical
index value to tell the SARM that it should execute the same operation
(for example, an ASDL command) for all occurrences of that index.
Consequently, if there are several options on a particular CSDL
command (OPT1, OPT2, OPT3, etc.), you can specify the OPT
parameter as an indexed parameter. When you specify the OPT
parameter as an indexed parameter, the SARM generates several
occurrences of that same ASDL command and each command has a
different value for the option being transmitted to the NEP.

For more information on parameter types, refer to the ASAP Developers


Reference.
Class

Indicates one of the following parameter classifications:

RRequired scalar parameter


OOptional scalar parameter
CRequired compound parameter
NOptional compound parameter
MMandatory indexed parameter
IOptional indexed parameter
SParameter count

For a detailed description of the Required and Optional parameter classifications, refer to the
ASAP Administration Guide.

Common Service Description Layer (CSDL)


commands
This cartridge provides the following CSDL Commands:

144

Oracle Corporation

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_ADD_ACB
C_AGCS-GTD5_4008_ADD_ACB-CLASS
C_AGCS-GTD5_4008_ADD_AR
C_AGCS-GTD5_4008_ADD_ATWC
C_AGCS-GTD5_4008_ADD_BLOCK-PC
C_AGCS-GTD5_4008_ADD_BLOCK-TCT
C_AGCS-GTD5_4008_ADD_CALL-PICKUP
C_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL
C_AGCS-GTD5_4008_ADD_CALLING-NN
C_AGCS-GTD5_4008_ADD_CDGG
C_AGCS-GTD5_4008_ADD_CFF-AC
C_AGCS-GTD5_4008_ADD_CFF-BC
C_AGCS-GTD5_4008_ADD_CFF-GRP-AC
C_AGCS-GTD5_4008_ADD_CFF-GRP-BC
C_AGCS-GTD5_4008_ADD_CFF-UC
C_AGCS-GTD5_4008_ADD_CFV-AC
C_AGCS-GTD5_4008_ADD_CFV-BC
C_AGCS-GTD5_4008_ADD_CFV-GRP-AC
C_AGCS-GTD5_4008_ADD_CFV-GRP-BC
C_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC
C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC
C_AGCS-GTD5_4008_ADD_CFV-UC
C_AGCS-GTD5_4008_ADD_CH
C_AGCS-GTD5_4008_ADD_COT
C_AGCS-GTD5_4008_ADD_CW
C_AGCS-GTD5_4008_ADD_CWO
C_AGCS-GTD5_4008_ADD_DCW
C_AGCS-GTD5_4008_ADD_DP
C_AGCS-GTD5_4008_ADD_DR
C_AGCS-GTD5_4008_ADD_DS
C_AGCS-GTD5_4008_ADD_DTM
C_AGCS-GTD5_4008_ADD_FLAS
C_AGCS-GTD5_4008_ADD_HCMK
C_AGCS-GTD5_4008_ADD_HGRP
C_AGCS-GTD5_4008_ADD_HGRP-MEM
C_AGCS-GTD5_4008_ADD_INFO-DIGIT

AG Communication Systems GTD-5 Cartridge Guide

145

Chapter 4: Service Definition

146

C_AGCS-GTD5_4008_ADD_LDDA
C_AGCS-GTD5_4008_ADD_LINE
C_AGCS-GTD5_4008_ADD_LNR
C_AGCS-GTD5_4008_ADD_LSM
C_AGCS-GTD5_4008_ADD_MWI
C_AGCS-GTD5_4008_ADD_ORG-DDIAL
C_AGCS-GTD5_4008_ADD_PARK
C_AGCS-GTD5_4008_ADD_PERM
C_AGCS-GTD5_4008_ADD_PILOT-LINE
C_AGCS-GTD5_4008_ADD_RSU
C_AGCS-GTD5_4008_ADD_SC30
C_AGCS-GTD5_4008_ADD_SC8
C_AGCS-GTD5_4008_ADD_SCA
C_AGCS-GTD5_4008_ADD_SCF
C_AGCS-GTD5_4008_ADD_SCR
C_AGCS-GTD5_4008_ADD_SCW
C_AGCS-GTD5_4008_ADD_SET-CCF
C_AGCS-GTD5_4008_ADD_SET-TDP
C_AGCS-GTD5_4008_ADD_SNR
C_AGCS-GTD5_4008_ADD_SR-DR
C_AGCS-GTD5_4008_ADD_SSO
C_AGCS-GTD5_4008_ADD_TDP
C_AGCS-GTD5_4008_ADD_TDS
C_AGCS-GTD5_4008_ADD_TEMP-DC
C_AGCS-GTD5_4008_ADD_TRDP
C_AGCS-GTD5_4008_ADD_TWC
C_AGCS-GTD5_4008_ADD_UACL
C_AGCS-GTD5_4008_ADD_UACN
C_AGCS-GTD5_4008_ADD_UANC
C_AGCS-GTD5_4008_ADD_UCD
C_AGCS-GTD5_4008_ADD_UCR
C_AGCS-GTD5_4008_ADD_URCL
C_AGCS-GTD5_4008_ADD_URCN
C_AGCS-GTD5_4008_ADD_URNC
C_AGCS-GTD5_4008_DEL_ACB
C_AGCS-GTD5_4008_DEL_ACB-CLASS

Oracle Corporation

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_AR
C_AGCS-GTD5_4008_DEL_ATWC
C_AGCS-GTD5_4008_DEL_BLOCK-PC
C_AGCS-GTD5_4008_DEL_BLOCK-TCT
C_AGCS-GTD5_4008_DEL_CALL-PICKUP
C_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL
C_AGCS-GTD5_4008_DEL_CALLING-NN
C_AGCS-GTD5_4008_DEL_CDGG
C_AGCS-GTD5_4008_DEL_CFF-AC
C_AGCS-GTD5_4008_DEL_CFF-BC
C_AGCS-GTD5_4008_DEL_CFF-GRP-AC
C_AGCS-GTD5_4008_DEL_CFF-GRP-BC
C_AGCS-GTD5_4008_DEL_CFF-UC
C_AGCS-GTD5_4008_DEL_CFV-AC
C_AGCS-GTD5_4008_DEL_CFV-BC
C_AGCS-GTD5_4008_DEL_CFV-GRP-AC
C_AGCS-GTD5_4008_DEL_CFV-GRP-BC
C_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC
C_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC
C_AGCS-GTD5_4008_DEL_CFV-UC
C_AGCS-GTD5_4008_DEL_CH
C_AGCS-GTD5_4008_DEL_COT
C_AGCS-GTD5_4008_DEL_CW
C_AGCS-GTD5_4008_DEL_CWO
C_AGCS-GTD5_4008_DEL_DCW
C_AGCS-GTD5_4008_DEL_DP
C_AGCS-GTD5_4008_DEL_DR
C_AGCS-GTD5_4008_DEL_DS
C_AGCS-GTD5_4008_DEL_DTM
C_AGCS-GTD5_4008_DEL_FLAS
C_AGCS-GTD5_4008_DEL_HGRP
C_AGCS-GTD5_4008_DEL_ICID
C_AGCS-GTD5_4008_DEL_LDDA
C_AGCS-GTD5_4008_DEL_LINE
C_AGCS-GTD5_4008_DEL_LNR
C_AGCS-GTD5_4008_DEL_MWI

AG Communication Systems GTD-5 Cartridge Guide

147

Chapter 4: Service Definition

C_AGCS-GTD5_4008_DEL_ORG-DDIAL
C_AGCS-GTD5_4008_DEL_PARK
C_AGCS-GTD5_4008_DEL_SC30
C_AGCS-GTD5_4008_DEL_SC8
C_AGCS-GTD5_4008_DEL_SCA
C_AGCS-GTD5_4008_DEL_SCF
C_AGCS-GTD5_4008_DEL_SCR
C_AGCS-GTD5_4008_DEL_SCW
C_AGCS-GTD5_4008_DEL_SET-TDP
C_AGCS-GTD5_4008_DEL_SNR
C_AGCS-GTD5_4008_DEL_SR-DR
C_AGCS-GTD5_4008_DEL_SSO
C_AGCS-GTD5_4008_DEL_TDP
C_AGCS-GTD5_4008_DEL_TDS
C_AGCS-GTD5_4008_DEL_TEMP-DC
C_AGCS-GTD5_4008_DEL_TRDP
C_AGCS-GTD5_4008_DEL_TWC
C_AGCS-GTD5_4008_DEL_UCD
C_AGCS-GTD5_4008_DEL_UCR
C_AGCS-GTD5_4008_MOD_CID
C_AGCS-GTD5_4008_MOD_DN
C_AGCS-GTD5_4008_MOD_HG-SIZE
C_AGCS-GTD5_4008_MOD_ICID
C_AGCS-GTD5_4008_MOD_INTERCEPT
C_AGCS-GTD5_4008_MOD_SCOS
C_AGCS-GTD5_4008_MOD_SUB-GROUP

C_AGCS-GTD5_4008_ADD_ACB
Adds the auto call back feature to a line.
Table 141: C_AGCS-GTD5_4008_ADD_ACB
Parameter Name
ACB_ACBB

148

Oracle Corporation

Description
Unrestricted automatic callback.

Range
Y/N

Default
Value

Type
S

Class
O

Common Service Description Layer (CSDL) commands

Table 141: C_AGCS-GTD5_4008_ADD_ACB


Parameter Name

Description

ACB_ACBC

Semi-restricted automatic callback.

DN

Range

Default
Value

Y/N

Type

Class

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 142: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_ACB

A_AGCS-GTD5_4008_ADD_ACB

C_AGCS-GTD5_4008_ADD_ACB-CLASS
Adds the CLASS-auto call back feature to a line.
Table 143: C_AGCS-GTD5_4008_ADD_ACB-CLASS
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

149

Chapter 4: Service Definition

Table 143: C_AGCS-GTD5_4008_ADD_ACB-CLASS


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 144: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_ACB-CLASS

A_AGCS-GTD5_4008_ADD_ACB-CLASS

C_AGCS-GTD5_4008_ADD_AR
Adds the automatic recall feature to a line.
Table 145: C_AGCS-GTD5_4008_ADD_AR
Parameter Name

Description

ARC_TYPE

Type of automatic recalling.

DN

Range

Type

Class

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

150

Oracle Corporation

ARCB
or
ARCC.

Default
Value

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 146: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_AR

A_AGCS-GTD5_4008_ADD_AR

C_AGCS-GTD5_4008_ADD_ATWC
Adds an always available usage sensitive three-way calling feature.
Table 147: C_AGCS-GTD5_4008_ADD_ATWC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 148: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_ATWC

ASDL
A_AGCS-GTD5_4008_ADD_ATWC

AG Communication Systems GTD-5 Cartridge Guide

151

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_BLOCK-PC
Adds the prefix call blocking feature to a line.
Table 149: C_AGCS-GTD5_4008_ADD_BLOCK-PC
Parameter Name

Description

Range

Default
Value

Type

Class

B0PS

Block 0+ dialing.

B1PS

Block 1+ dialing.

BIDD

Block 011+ dialing.

BIE3

Block 01+ dialing.

BLKP

Block prefix calls.

BZMS

Block 0- dialing.

BZZM

Block 00- dialing.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 150: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_BLOCK-PC

152

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_ADD_BLOCK-PC

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_ADD_BLOCK-TCT
Adds the translation call type blocking feature to a line.
Table 151: C_AGCS-GTD5_4008_ADD_BLOCK-TCT
Parameter Name

Description

Range

Default
Value

Type

Class

B556

Block 556 calls.

Y/N

B700

Block 700 calls.

Y/N

B900

Block 900 calls.

Y/N

B976

Block 976 calls.

Y/N

BLDA

Block local directory assistance Y/N


calls.

BLKT

Block translation call type calls. Y/N

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 152: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_BLOCK-TCT

ASDL
A_AGCS-GTD5_4008_ADD_BLOCK-TCT

AG Communication Systems GTD-5 Cartridge Guide

153

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_CALL-PICKUP
Adds the call pickup - directed, group or extended feature to a line.
Table 153: C_AGCS-GTD5_4008_ADD_CALL-PICKUP
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

PICK_GROUP

General call pickup group


assigned.

PICK_TYPE

Type of call-pickup:

0 - 4095

GEN=General group call


pickup
DIRG=Directed group call
pickup
XGEN=Extended general
call pickup
DIRD=Directed call pickup
based on dialing plan
SOHO=Small office/home
office pickup

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 154: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_CALL-PICKUP

154

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_ADD_CALL-PICKUP

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL
Adds a caller ID block per line.
Table 155: C_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 156: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL

A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL

C_AGCS-GTD5_4008_ADD_CALLING-NN
Adds the calling name and number delivery feature to a line.
Table 157: C_AGCS-GTD5_4008_ADD_CALLING-NN
Parameter Name

Description

Range

Default
Value

Type

Class

CLND

Calling name delivery.

Y/N

CNDE

Calling number delivery.

Y/N

AG Communication Systems GTD-5 Cartridge Guide

155

Chapter 4: Service Definition

Table 157: C_AGCS-GTD5_4008_ADD_CALLING-NN


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 158: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CALLING-NN

A_AGCS-GTD5_4008_ADD_CALLING-NN

C_AGCS-GTD5_4008_ADD_CDGG
Adds the control party for the group features.
Table 159: C_AGCS-GTD5_4008_ADD_CDGG
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

156

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 159: C_AGCS-GTD5_4008_ADD_CDGG


Parameter Name

Description

NXX

Range

Default
Value

Exchange of the DN.

Type
S

Class
O

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 160: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CDGG

A_AGCS-GTD5_4008_ADD_CDGG

C_AGCS-GTD5_4008_ADD_CFF-AC
Adds the call forward fixed all calls feature to a line.
Table 161: C_AGCS-GTD5_4008_ADD_CFF-AC
Parameter Name

Description

Range

Default
Value

Type

Class

DAFI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DAFI_REM

The type of call forwarding


assigned.

normal REM
remote RCF

DAFI_REM_NUM

The maximum number of


simultaneous calls to forward.

0 - 255

DAFI_TODA

Specifies whether call


Y/N
forwarding all calls fixed can be
activated by time of day/day of
week basis.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

AG Communication Systems GTD-5 Cartridge Guide

157

Chapter 4: Service Definition

Table 161: C_AGCS-GTD5_4008_ADD_CFF-AC


Parameter Name

Description

Range

Default
Value

Type

Class

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 162: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CFF-AC

A_AGCS-GTD5_4008_ADD_CFF-AC

C_AGCS-GTD5_4008_ADD_CFF-BC
Adds the call forward fixed busy feature to a line.
Table 163: C_AGCS-GTD5_4008_ADD_CFF-BC
Parameter Name

Description

Range

Default
Value

Type

Class

DBFI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DBFI_REM

The type of call forwarding


assigned.

normal REM
remote RCF

DBFI_REM_NUM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

158

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 163: C_AGCS-GTD5_4008_ADD_CFF-BC


Parameter Name

Description

Range

Default
Value

Type

Class

DBFI_TODA

Specifies whether the call


Y/N
forwarding all calls fixed feature
can be activated by time of day/
day of week basis.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 164: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CFF-BC

A_AGCS-GTD5_4008_ADD_CFF-BC

C_AGCS-GTD5_4008_ADD_CFF-GRP-AC
Adds the call forward group fixed all calls feature.
Table 165: C_AGCS-GTD5_4008_ADD_CFF-GRP-AC
Parameter Name
DAFG_ACT

Description

Range

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

Default
Value

Type
S

Class
R

AG Communication Systems GTD-5 Cartridge Guide

159

Chapter 4: Service Definition

Table 165: C_AGCS-GTD5_4008_ADD_CFF-GRP-AC


Parameter Name

Description

DAFG_REM

Maximum number of
simultaneous calls that can be
forwarded.

HGRP_NUM
NE_ID_AGCS-GTD5

Range

Default
Value

0 - 255

Type

Class

Hunt group number.

Remote network element name.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 166: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CFF-GRP-AC

A_AGCS-GTD5_4008_ADD_CFF-GRP-AC

C_AGCS-GTD5_4008_ADD_CFF-GRP-BC
Adds the call forward group fixed busy calls feature.
Table 167: C_AGCS-GTD5_4008_ADD_CFF-GRP-BC
Parameter Name

Description

Range

Default
Value

Type

Class

DBFG_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DBFG_REM

Maximum number of
simultaneous calls that can be
forwarded.

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

160

Oracle Corporation

0 - 255

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 168: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CFF-GRP-BC

A_AGCS-GTD5_4008_ADD_CFF-GRP-BC

C_AGCS-GTD5_4008_ADD_CFF-UC
Adds the call forward fixed unanswered feature to a line.
Table 169: C_AGCS-GTD5_4008_ADD_CFF-UC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

DNFI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DNFI_NAT

Prevents subscriber from


changing the number of rings.

Y/N,
Y=NAT,
N=VNA
T

DNFI_REM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

DNFI_RING

Number of seconds the device


rung before the call is
forwarded.

0 - 60

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

161

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 170: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CFF-UC

A_AGCS-GTD5_4008_ADD_CFF-UC

C_AGCS-GTD5_4008_ADD_CFV-AC
Adds the call forward variable all calls feature to a line.
Table 171: C_AGCS-GTD5_4008_ADD_CFV-AC
Parameter Name

Description

Range

Default
Value

Type

Class

DAVI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DAVI_REM

Type of call forwarding


assigned.

normal REM
remote RCF

DAVI_REM_NUM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

DAVI_TODA

Y/N
Specifies whether call
forwarding all calls fixed can be
activated by time of day/day of
week basis.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

162

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 171: C_AGCS-GTD5_4008_ADD_CFV-AC


Parameter Name

Description

NXX

Range

Default
Value

Exchange of the DN.

Type
S

Class
O

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 172: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CFV-AC

A_AGCS-GTD5_4008_ADD_CFV-AC

C_AGCS-GTD5_4008_ADD_CFV-BC
Adds the call forward variable busy calls feature to a line.
Table 173: C_AGCS-GTD5_4008_ADD_CFV-BC
Parameter Name

Description

Range

Default
Value

Type

Class

DBVI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DBVI_REM

Maximum number of
simultaneous calls that can be
forwarded.

DBVI_TODA

Specifies whether call


Y/N
forwarding all calls fixed can be
activated by time of day/day of
week basis.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

0 - 255

AG Communication Systems GTD-5 Cartridge Guide

163

Chapter 4: Service Definition

Table 173: C_AGCS-GTD5_4008_ADD_CFV-BC


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 174: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CFV-BC

A_AGCS-GTD5_4008_ADD_CFV-BC

C_AGCS-GTD5_4008_ADD_CFV-GRP-AC
Adds the call forward group all calls feature to a line.
Table 175: C_AGCS-GTD5_4008_ADD_CFV-GRP-AC
Parameter Name

Description

Range

Default
Value

Type

Class

DAVG_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DAVG_REM

Maximum number of
simultaneous calls that can be
forwarded.

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

164

Oracle Corporation

0 - 255

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 176: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CFV-GRP-AC

A_AGCS-GTD5_4008_ADD_CFV-GRP-AC

C_AGCS-GTD5_4008_ADD_CFV-GRP-BC
Adds the call forward group variable busy calls feature.
Table 177: C_AGCS-GTD5_4008_ADD_CFV-GRP-BC
Parameter Name

Description

Range

Default
Value

Type

Class

DBVG_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DBVG_REM

Maximum number of
simultaneous calls that can be
forwarded.

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

0 - 255

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 178: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_CFV-GRP-BC

ASDL
A_AGCS-GTD5_4008_ADD_CFV-GRP-BC

AG Communication Systems GTD-5 Cartridge Guide

165

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC
Adds the call forward group shared variable busy calls feature.
Table 179: C_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC
Parameter Name

Description

Range

Default
Value

Type

Class

DBVS_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DBVS_REM

Maximum number of
simultaneous calls that can be
forwarded.

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

0 - 255

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 180: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC

A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC

C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC
Adds call forward group shared variable unanswered calls feature.
Table 181: C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC
Parameter Name
DNVS_ACT

166

Oracle Corporation

Description

Range

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

Default
Value

Type
S

Class
O

Common Service Description Layer (CSDL) commands

Table 181: C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC


Parameter Name

Description

Range

Default
Value

Type

Class

DNVS_NAT

Prevents subscriber from


changing the number of rings.

Y/N,
Y=NAT,
N=VNA
T

DNVS_REM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

DNVS_RING

The number of rings provided


before the call is forwarded.

0 - 60

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 182: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC

A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC

C_AGCS-GTD5_4008_ADD_CFV-UC
Adds the call forward variable unanswered calls feature to a line.
Table 183: C_AGCS-GTD5_4008_ADD_CFV-UC
Parameter Name
DN

Description
Directory number. Must include
either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

Range

Default
Value

Type
S

Class
O

AG Communication Systems GTD-5 Cartridge Guide

167

Chapter 4: Service Definition

Table 183: C_AGCS-GTD5_4008_ADD_CFV-UC


Parameter Name

Description

Range

Default
Value

Type

Class

DNVI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DNVI_NAT

Prevents subscriber from


changing the number of rings.

Y/N,
Y=NAT,
N=VNA
T

DNVI_REM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

DNVI_RING

Number of seconds the device is 0 - 60


rung before the call is
forwarded.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 184: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_CFV-UC

168

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_ADD_CFV-UC

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_ADD_CH
Adds the call hold feature to a line.
Table 185: C_AGCS-GTD5_4008_ADD_CH
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

HOLD_METHOD

Flip flop by digit method


(DIGIT) or Flip flop by Flash
metod (FLASH)

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 186: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_CH

ASDL
A_AGCS-GTD5_4008_ADD_CH

AG Communication Systems GTD-5 Cartridge Guide

169

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_COT
Adds the customer originated trace feature to a line.
Table 187: C_AGCS-GTD5_4008_ADD_COT
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 188: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_COT

A_AGCS-GTD5_4008_ADD_COT

C_AGCS-GTD5_4008_ADD_CW
Adds the Call Waiting feature to a line.
Table 189: C_AGCS-GTD5_4008_ADD_CW
Parameter Name

Description

Range

Default
Value

Type

Class

CWDD_ANNO

Route to call waiting deluxe


default announcement.

Y/N

CWDD_FORW

Forward to call forwarding on


no answer digits.

Y/N

170

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 189: C_AGCS-GTD5_4008_ADD_CW


Parameter Name

Description

Range

Default
Value

Type

Class

CWDD_RING

Continue ringing.

Y/N

CWT_CWCJ

Call waiting with call join.

Y/N

CWT_CWD1

Call waiting deluxe type 1.

Y/N

CWT_CWD2

Call waiting deluxe type 2.

Y/N

CWT_CWD3

Call waiting deluxe type 3.

Y/N

CWT_CWD4

Call waiting deluxe type 4.

Y/N

CWT_CWD5

Call waiting deluxe type 5.

Y/N

CWT_CWID

Calling identity delivery on call Y/N


waiting.

CWT_CWJI

Call waiting with call join and


calling identity delivery on call
waiting.

Y/N

CWT_CWT

Call waiting terminating/


additional call offering.

Y/N

CW_ID_CODE

Specifies whether the call


waiting cancellation is allowed.

Y/N

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

171

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 190: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_CW

A_AGCS-GTD5_4008_ADD_CW

C_AGCS-GTD5_4008_ADD_CWO
Adds the call waiting originating feature to a line.
Table 191: C_AGCS-GTD5_4008_ADD_CWO
Parameter Name

Description

CWO_CODE

Specifies whether the call


waiting feature is code
controlled.

DN

Range

Default
Value

Y/N

Type

Class

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 192: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_CWO

172

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_ADD_CWO

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_ADD_DCW
Adds the distinctive call waiting feature to a line.
Table 193: C_AGCS-GTD5_4008_ADD_DCW
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 194: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_DCW

A_AGCS-GTD5_4008_ADD_DCW

C_AGCS-GTD5_4008_ADD_DP
Adds the dial pulse feature to a line.
Table 195: C_AGCS-GTD5_4008_ADD_DP
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

173

Chapter 4: Service Definition

Table 195: C_AGCS-GTD5_4008_ADD_DP


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 196: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_DP

A_AGCS-GTD5_4008_ADD_DP

C_AGCS-GTD5_4008_ADD_DR
Enables the distinctive ring feature to a line.
Table 197: C_AGCS-GTD5_4008_ADD_DR
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 198: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_DR

174

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_ADD_DR

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_ADD_DS
Adds the data security.
Table 199: C_AGCS-GTD5_4008_ADD_DS
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

DS_BDAD

Data line security assigned with Y/N


an option, to deactivate the
feature for the duration of one
call by dialing a code.

DS_CDAD

Data line security normally


Y/N
inactive but can be activated for
the duration of one call by
dialing a code.

DS_DAD

Data line security assigned at all Y/N


times.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 200: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_DS

ASDL
A_AGCS-GTD5_4008_ADD_DS

AG Communication Systems GTD-5 Cartridge Guide

175

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_DTM
Adds the denied termination feature.
Table 201: C_AGCS-GTD5_4008_ADD_DTM
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 202: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_DTM

A_AGCS-GTD5_4008_ADD_DTM

C_AGCS-GTD5_4008_ADD_FLAS
Sets the on hook treatment field.
Table 203: C_AGCS-GTD5_4008_ADD_FLAS
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

176

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 203: C_AGCS-GTD5_4008_ADD_FLAS


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 204: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_FLAS

A_AGCS-GTD5_4008_ADD_FLAS

C_AGCS-GTD5_4008_ADD_HCMK
Adds a hardware classmark set.
Table 205: C_AGCS-GTD5_4008_ADD_HCMK
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

HCMK_DIGIT

HCMK digit.

HCMK_VALUE

HCMK value.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

177

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 206: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_HCMK

A_AGCS-GTD5_4008_ADD_HCMK

C_AGCS-GTD5_4008_ADD_HGRP
Adds an hunt group.
Table 207: C_AGCS-GTD5_4008_ADD_HGRP
Parameter Name

Description

Range

Default
Value

Type

Class

ALT_ROUTE

Alternate route.

BGRP

Business group number.

BILLING_DN

Billing directory number.

BILLING_LINE

Line of billing DN.

BILLING_NPA

Area code of billing DN.

BILLING_NXX

Exchange of billing DN.

CSNK

Charge sink. Required, if the


SCOS is not provided.

HCMK_DIGIT

HCMK digit.

HCMK_VALUE

HCMK value.

HGRP_NUM

Hunt group number.

LINK

Link.

MJAT

Major alarm.

MNAT

Minor alarm.

NE_ID_AGCS-GTD5

Remote network element name.

OPT

Other optional parameters.

178

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 207: C_AGCS-GTD5_4008_ADD_HGRP


Parameter Name

Description

Range

Default
Value

Type

Class

PCOS

Primary class of service.

RELS

Release.

RSNK

Selective route sink.

RSU_DIGIT

RSU digit.

SCOS

Secondary class of service.

SIZE

Size.

SSNK

Screen sink.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 208: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_HGRP

A_AGCS-GTD5_4008_ADD_HGRP

C_AGCS-GTD5_4008_ADD_HGRP-MEM
Adds an hunt group member.
Table 209: C_AGCS-GTD5_4008_ADD_HGRP-MEM
Parameter Name

Description

Range

Default
Value

Type

Class

BGRP

Business group number or


Logical conference number.

CDDC

Called party disconnect.


Required, if the SCOS is not
provided.

CGDC

Calling party disconnect.


Required, if the SCOS is not
provided.

AG Communication Systems GTD-5 Cartridge Guide

179

Chapter 4: Service Definition

Table 209: C_AGCS-GTD5_4008_ADD_HGRP-MEM


Parameter Name

Description

Range

Default
Value

Type

Class

CGND

Calling number determination.


Required, if the SCOS is not
provided.

CSNK

Charge sink. Required, if the


SCOS is not provided.

CSOU

Charge source. Required, if the


SCOS is not provided.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

DPV

Digital pad value index.

DTYP

Device type.

HCMK_DIGIT

HCMK digit.

HCMK_VALUE

HCMK value.

HGM

Hunt grop member.

HGRP_NUM

Hunt group number.

INFO

Info digits.

LEN

Line equipment number.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

OPT

Other optional parameters.

PCOS

Primary class of service.

PERM

Permanent treatment index.

180

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 209: C_AGCS-GTD5_4008_ADD_HGRP-MEM


Parameter Name

Description

Range

Default
Value

Type

Class

RING

Ring.

RSOU

Selective route source.

SCOS

Secondary class of service.

SSNK

Screen sink.

SSOU

Screen source.

SUB_GRP

Sub group.

TDS

Translation data set.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 210: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_HGRP-MEM

A_AGCS-GTD5_4008_ADD_HGRP-MEM

C_AGCS-GTD5_4008_ADD_INFO-DIGIT
Adds the info digits.
Table 211: C_AGCS-GTD5_4008_ADD_INFO-DIGIT
Parameter Name

Description

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

INFO_DIGIT

Information digit.

LINE
NE_ID_AGCS-GTD5

Range

Default
Value

Type

Class

Line of the DN.

Remote network element name.

0 - 63

AG Communication Systems GTD-5 Cartridge Guide

181

Chapter 4: Service Definition

Table 211: C_AGCS-GTD5_4008_ADD_INFO-DIGIT


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 212: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_INFO-DIGIT

A_AGCS-GTD5_4008_ADD_INFO-DIGIT

C_AGCS-GTD5_4008_ADD_LDDA
Adds the long distance distinctive ringing and/or distinctive call waiting tone.
Table 213: C_AGCS-GTD5_4008_ADD_LDDA
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LDDA_DRIN

Long distance distinctive


Y/N
alerting active. DRIN will be
sent when LDDA_DRIN=Y and
NDRI will be sent when
LDDA_DRIN=N.

LDDA_DTON

Long distance distinctive call


waiting tone active.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

182

Oracle Corporation

DTON,
NDTO
or
ODTO

Common Service Description Layer (CSDL) commands

Table 213: C_AGCS-GTD5_4008_ADD_LDDA


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 214: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_LDDA

A_AGCS-GTD5_4008_ADD_LDDA

C_AGCS-GTD5_4008_ADD_LINE
Adds a line.
Table 215: C_AGCS-GTD5_4008_ADD_LINE
Parameter Name

Description

Range

Default
Value

Type

Class

BGRP

Business group number or


Logical conference number.

CDDC

Called party disconnect.


Required, if the SCOS is not
provided.

CGDC

Calling party disconnect.


Required, if the SCOS is not
provided.

CGND

Calling number determination.


Required, if the SCOS is not
provided.

CSNK

Charge sink. Required, if the


SCOS is not provided.

AG Communication Systems GTD-5 Cartridge Guide

183

Chapter 4: Service Definition

Table 215: C_AGCS-GTD5_4008_ADD_LINE


Parameter Name

Description

Range

Default
Value

Type

Class

CSOU

Charge source. Required, if the


SCOS is not provided.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

HCMK_DIGIT

HCMK digit.

HCMK_VALUE

HCMK value.

INFO

Info digits.

LEN

Line equipment number.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

OPT

Other options.

PCOS

Primary class of service.

RSOU

Selective route source.

SCOS

Secondary class of service.

SSNK

Screen sink.

SSOU

Screen source.

SUB_GRP

Sub group.

TDS

Translation data set.

184

Oracle Corporation

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 216: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_LINE

A_AGCS-GTD5_4008_ADD_LINE

C_AGCS-GTD5_4008_ADD_LNR
Adds the last number redial feature to a line.
Table 217: C_AGCS-GTD5_4008_ADD_LNR
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 218: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_LNR

ASDL
A_AGCS-GTD5_4008_ADD_LNR

AG Communication Systems GTD-5 Cartridge Guide

185

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_LSM
Adds a line supervision method.
Table 219: C_AGCS-GTD5_4008_ADD_LSM
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

LSM_TYPE

LSM type.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 220: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_LSM

A_AGCS-GTD5_4008_ADD_LSM

C_AGCS-GTD5_4008_ADD_MWI
Adds the message waiting - shutter dialtone, visual, audible feature to a line.
Table 221: C_AGCS-GTD5_4008_ADD_MWI
Parameter Name
DN

186

Description
Directory number. Must include
either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

Oracle Corporation

Range

Default
Value

Type
S

Class
O

Common Service Description Layer (CSDL) commands

Table 221: C_AGCS-GTD5_4008_ADD_MWI


Parameter Name

Description

Range

Default
Value

Type

Class

LINE

Line of the DN.

MWI_AUDIBLE

Specifies whether audible MWI Y/N


is allowed.

MWI_BOTH

Specifies whether both audible


and visual MWI are allowed.

Y/N

MWI_PRA

Set periodic ringing.

0-4

Y/N

0 = No alert
1 = 15-minute alert
2 = 30-minute alert
3 = 45-minute alert
4 = 60-minute alert

MWI_VISUAL

Specifies whether allow visual


MWI is allowed.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 222: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_MWI

ASDL
A_AGCS-GTD5_4008_ADD_MWI

AG Communication Systems GTD-5 Cartridge Guide

187

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_ORG-DDIAL
Adds the originator denied 10XXX or 101XXXX dialing feature.
Table 223: C_AGCS-GTD5_4008_ADD_ORG-DDIAL
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 224: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_ORG-DDIAL

A_AGCS-GTD5_4008_ADD_ORG-DDIAL

C_AGCS-GTD5_4008_ADD_PARK
Adds the call park feature to a line.
Table 225: C_AGCS-GTD5_4008_ADD_PARK
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

188

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 225: C_AGCS-GTD5_4008_ADD_PARK


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 226: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_PARK

A_AGCS-GTD5_4008_ADD_PARK

C_AGCS-GTD5_4008_ADD_PERM
Sets the permanent treatment index.
Table 227: C_AGCS-GTD5_4008_ADD_PERM
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

PERM_ID

Permanent treatment index.

0 - 15

AG Communication Systems GTD-5 Cartridge Guide

189

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 228: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_PERM

A_AGCS-GTD5_4008_ADD_PERM

C_AGCS-GTD5_4008_ADD_PILOT-LINE
Adds a pilot line to an hunt group.
Table 229: C_AGCS-GTD5_4008_ADD_PILOT-LINE
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

HGRP_NUM

Hunt group number.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 230: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_PILOT-LINE

190

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_ADD_PILOT-LINE

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_ADD_RSU
Adds a group for survivability.
Table 231: C_AGCS-GTD5_4008_ADD_RSU
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

RSU_DIGIT

RSU digit.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 232: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_RSU

A_AGCS-GTD5_4008_ADD_RSU

C_AGCS-GTD5_4008_ADD_SC30
Adds the speed call 30.
Table 233: C_AGCS-GTD5_4008_ADD_SC30
Parameter Name
DN

Description
Directory number. Must include
either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

Range

Default
Value

Type
S

Class
O

AG Communication Systems GTD-5 Cartridge Guide

191

Chapter 4: Service Definition

Table 233: C_AGCS-GTD5_4008_ADD_SC30


Parameter Name

Description

Range

Default
Value

Type

Class

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

SC3_F

Speed call 30 fixed.

Y/N

SC3_V

Speed call 30 variable.

Y/N

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 234: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_SC30

A_AGCS-GTD5_4008_ADD_SC30

C_AGCS-GTD5_4008_ADD_SC8
Adds the speed call 8.
Table 235: C_AGCS-GTD5_4008_ADD_SC8
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

192

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 235: C_AGCS-GTD5_4008_ADD_SC8


Parameter Name

Description

Range

Default
Value

Type

Class

SC8_F

Speed call 8 fixed.

Y/N

SC8_V

Speed call 8 variable.

Y/N

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 236: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_SC8

A_AGCS-GTD5_4008_ADD_SC8

C_AGCS-GTD5_4008_ADD_SCA
Adds the selective call acceptance feature to a line.
Table 237: C_AGCS-GTD5_4008_ADD_SCA
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

193

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 238: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_SCA

A_AGCS-GTD5_4008_ADD_SCA

C_AGCS-GTD5_4008_ADD_SCF
Adds the selective call forwarding feature to a line.
Table 239: C_AGCS-GTD5_4008_ADD_SCF
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

DSVI_ACT

Specifies whether call


Y/N
forwarding can be activated by a
customer-dialed code.

DSVI_ESCF

Enhanced selective call


forwarding.

Y/N

DSVI_REM

Maximum number of
simultaneous calls that can be
forwarded.

0 - 255

DSVI_TODA

Call forwarding all calls fixed


Y/N
can be activated by time of day/
day of week basis.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

194

Oracle Corporation

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 240: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_SCF

A_AGCS-GTD5_4008_ADD_SCF

C_AGCS-GTD5_4008_ADD_SCR
Adds the selective call reject feature to a line.
Table 241: C_AGCS-GTD5_4008_ADD_SCR
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 242: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_SCR

ASDL
A_AGCS-GTD5_4008_ADD_SCR

AG Communication Systems GTD-5 Cartridge Guide

195

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_SCW
Adds the selective call waiting feature to a line.
Table 243: C_AGCS-GTD5_4008_ADD_SCW
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 244: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_SCW

A_AGCS-GTD5_4008_ADD_SCW

C_AGCS-GTD5_4008_ADD_SET-CCF
Sets the custom calling feature.
Table 245: C_AGCS-GTD5_4008_ADD_SET-CCF
Parameter Name
CCF_DANF

196

Oracle Corporation

Description
Specifies whether call
forwarding no answer, fixed is
enabled.

Range
Y/N

Default
Value

Type
S

Class
O

Common Service Description Layer (CSDL) commands

Table 245: C_AGCS-GTD5_4008_ADD_SET-CCF


Parameter Name

Description

Range

Default
Value

Type

Class

CCF_DBGF

Specifies whether group call


Y/N
forwarding busy line fixed digits
is enabled.

CCF_DBYF

Specifies whether shared call


forwarding, busy line fixed
digits is enabled.

Y/N

CCF_DDAF

Specifies whether call


forwarding all calls fixed is
enabled.

Y/N

CCF_DGDF

Specifies whether group call


forwarding all calls fixed digits
is enabled.

Y/N

CCF_MWIA

Specifies whether the message


waitng indicator is enabled.

Y/N

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

FWD_DN

Forward directory number. Must


include either DN or NPA (if
10-digit switch), NXX, and
LINE

FWD_LINE

Line of the FWD_DN.

FWD_NPA

Area code of the FWD_DN.

FWD_NXX

Exchange of the FWD_DN.

HGRP_NUM

Hunt group number. Must


include HRGP_NUM or either
DN or NPA (if 10-digit switch),
NXX, and LINE.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

AG Communication Systems GTD-5 Cartridge Guide

197

Chapter 4: Service Definition

Table 245: C_AGCS-GTD5_4008_ADD_SET-CCF


Parameter Name

Description

Range

Default
Value

Type

Class

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 246: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_SET-CCF

A_AGCS-GTD5_4008_ADD_SET-CCF

C_AGCS-GTD5_4008_ADD_SET-TDP
Sets one or more triggers for AIN intraction.
Table 247: C_AGCS-GTD5_4008_ADD_SET-TDP
Parameter Name
CTYPE

Description
Call Type:

Range

Default
Value

Type

Class

DATA data
VOIC voice
VODA both voice and data

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

198

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 247: C_AGCS-GTD5_4008_ADD_SET-TDP


Parameter Name

Description

Range

Default
Value

Type

Class

TACI

Specifies whether the trigger is


active.

Y/N

TINDEX

Trigger index.

1 - 255

TTYPE

Trigger Type:

FSAV - Facility selected


and available trigger
OAAU - Origination
attempt authorized trigger
OBSY - Originating called
party busy trigger
OHD - Off-hook delay
trigger
OHI - Off-hook immediate
trigger
ONAN - Originating no
answer trigger
TBSY - Terminating busy
trigger
TMAT - Termination
attempt trigger
TNAN - Terminating no
answer trigger

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 248: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_SET-TDP

ASDL
A_AGCS-GTD5_4008_ADD_SET-TDP

AG Communication Systems GTD-5 Cartridge Guide

199

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_SNR
Adds the saved number redial feature to a line.
Table 249: C_AGCS-GTD5_4008_ADD_SNR
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 250: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_SNR

A_AGCS-GTD5_4008_ADD_SNR

C_AGCS-GTD5_4008_ADD_SR-DR
Adds the smart ring distinctive ringing feature to a line.
Table 251: C_AGCS-GTD5_4008_ADD_SR-DR
Parameter Name

Description

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

DRNG

Distinctive ringing class.

200

Oracle Corporation

Range

1/2/3

Default
Value

Type

Class

Common Service Description Layer (CSDL) commands

Table 251: C_AGCS-GTD5_4008_ADD_SR-DR


Parameter Name

Description

Range

Default
Value

Type

Class

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

SEC_DN

Secondary directory number.


Must include either SEC_DN or
SEC_NPA (if 10-digit switch),
SEC_NXX, and SEC_LINE, or
HGRP_NUM.

SEC_LINE

Line of the SEC_DN.

SEC_NPA

Area code of the SEC_DN.

SEC_NXX

Exchange of the SEC_DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 252: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_SR-DR

ASDL
A_AGCS-GTD5_4008_ADD_SR-DR

AG Communication Systems GTD-5 Cartridge Guide

201

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_SSO
Adds the special screening on origination.
Table 253: C_AGCS-GTD5_4008_ADD_SSO
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 254: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_SSO

A_AGCS-GTD5_4008_ADD_SSO

C_AGCS-GTD5_4008_ADD_TDP
Adds the trigger detection point provisioning.
Table 255: C_AGCS-GTD5_4008_ADD_TDP
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

202

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 255: C_AGCS-GTD5_4008_ADD_TDP


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 256: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_TDP

A_AGCS-GTD5_4008_ADD_TDP

C_AGCS-GTD5_4008_ADD_TDS
Adds a translation data set.
Table 257: C_AGCS-GTD5_4008_ADD_TDS
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

TDS_DIGIT

TDS digit.

AG Communication Systems GTD-5 Cartridge Guide

203

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 258: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_TDS

A_AGCS-GTD5_4008_ADD_TDS

C_AGCS-GTD5_4008_ADD_TEMP-DC
Enables a temporary disconnect feature on a line.
Table 259: C_AGCS-GTD5_4008_ADD_TEMP-DC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 260: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_TEMP-DC

204

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_ADD_TEMP-DC

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_ADD_TRDP
Adds a translation detection point.
Table 261: C_AGCS-GTD5_4008_ADD_TRDP
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

TACI

Specifies whether the trigger is


active.

Y/N

TCT_AFR

Automatic flexible routing.

Y/N

TCT_CUAC

Customized access code.

Y/N

TCT_CUIC

Customized intercom.

Y/N

TCT_DIG3

Three-digit trigger.

Y/N

TCT_DIG4

Four-digit trigger.

Y/N

TCT_DIG5

Five-digit trigger.

Y/N

TCT_DIG6

Six-digit trigger.

Y/N

TCT_DIG8

Eight-digit trigger.

Y/N

TCT_DIGA

Ten-digit trigger.

Y/N

TCT_LNP

Local number portability


trigger.

Y/N

TCT_N11

N11 trigger.

Y/N

TCT_VERT

Vertical service code trigger.

Y/N

AG Communication Systems GTD-5 Cartridge Guide

205

Chapter 4: Service Definition

Table 261: C_AGCS-GTD5_4008_ADD_TRDP


Parameter Name

Description

TRDP_INDEX

The trigger criteria index.

Range

Default
Value

1 - 255

Type
S

Class
R

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 262: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_TRDP

A_AGCS-GTD5_4008_ADD_TRDP

C_AGCS-GTD5_4008_ADD_TWC
Adds the three way calling feature to a line.
Table 263: C_AGCS-GTD5_4008_ADD_TWC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

206

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 263: C_AGCS-GTD5_4008_ADD_TWC


Parameter Name

Description

TWC_REST

Range

Default
Value

Specifies whether 3-way calling


is to be restricted.

TWC_TMET

Type

Class

TCOM = Restrict
completely
TDGR = Last in Group
(Hunt groups only)
TNON = No restrictions
TONT = No TWC, only call
transfer
TDIS - Transfer on
disconnect or explicit
request.
TEXP - Transfer on explicit
request only.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 264: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_TWC

A_AGCS-GTD5_4008_ADD_TWC

C_AGCS-GTD5_4008_ADD_UACL
Adds the various usages assignable.
Table 265: C_AGCS-GTD5_4008_ADD_UACL
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

207

Chapter 4: Service Definition

Table 265: C_AGCS-GTD5_4008_ADD_UACL


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

UACL_ACBC

Specifies whether usage


assignable auto-callback is
enabled.

Y/N

UACL_ARCC

Specifies whether usage


assignable auto-recall is
enabled.

Y/N

UACL_COTR

Specifies whether usage


assignable call trace is enabled.

Y/N

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 266: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_UACL

A_AGCS-GTD5_4008_ADD_UACL

C_AGCS-GTD5_4008_ADD_UACN
Adds the usage assignable calling name/number.
Table 267: C_AGCS-GTD5_4008_ADD_UACN
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

208

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 267: C_AGCS-GTD5_4008_ADD_UACN


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

UACN_CNAB

Specifies whether calling name


delivery blocking is enabled.

Y/N

UACN_CNAM

Specifies whether calling name


delivery usage assignable is
enabled.

Y/N

UACN_CNDB

Specifies whether calling


Y/N
number delivery blocking usage
assignable is enabled.

UACN_CNDE

Specifies whether calling


number delivery usage
assignable is enabled.

Y/N

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 268: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_UACN

ASDL
A_AGCS-GTD5_4008_ADD_UACN

AG Communication Systems GTD-5 Cartridge Guide

209

Chapter 4: Service Definition

C_AGCS-GTD5_4008_ADD_UANC
Adds the various assignable usages.
Table 269: C_AGCS-GTD5_4008_ADD_UANC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

UANC_CLJ

Specifies whether call join


subscription is assignable.

Y/N

UANC_CSMI

Specifies whether VMS call


screening usage is assignable.

Y/N

UANC_DND

Specifies whether the do not


disturb subscription is
assignable.

Y/N

UANC_TWC

Specifies whether three-way


calling usage is assignable.

Y/N

UANC_WUP

Specifies whether the wake-up/


reminder subscription is
assignable.

Y/N

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 270: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_ADD_UANC

210

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_ADD_UANC

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_ADD_UCD
Adds the uniform call distribution feature to a line.
Table 271: C_AGCS-GTD5_4008_ADD_UCD
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 272: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_UCD

A_AGCS-GTD5_4008_ADD_UCD

C_AGCS-GTD5_4008_ADD_UCR
Adds an unidentified call rejection feature to a line.
Table 273: C_AGCS-GTD5_4008_ADD_UCR
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

211

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 274: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_UCR

A_AGCS-GTD5_4008_ADD_UCR

C_AGCS-GTD5_4008_ADD_URCL
Adds the various recordable usages.
Table 275: C_AGCS-GTD5_4008_ADD_URCL
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

URCL_ACBC

Specifies whether automatic


call-back calling usage is
recordable.

Y/N

URCL_ARCC

Specifies whether automatic


recall usage is recordable.

Y/N

URCL_COTR

Specifies whether customer


originated trace usage is
recordable.

Y/N

URCL_CWDC

Specifies whether call waiting


deluxe conference usage is
recordable.

Y/N

212

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 275: C_AGCS-GTD5_4008_ADD_URCL


Parameter Name

Description

URCL_UCRI

Specifies whether unidentified


call rejection usage is
assignable.

Range

Default
Value

Y/N

Type
S

Class
O

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 276: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_URCL

A_AGCS-GTD5_4008_ADD_URCL

C_AGCS-GTD5_4008_ADD_URCN
Adds the various recordable usages.
Table 277: C_AGCS-GTD5_4008_ADD_URCN
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

URCN_CLND

Specifies whether calling name


delivery usage is recordable.

Y/N

URCN_CNAB

Specifies whether the calling


name delivery blocking usage is
recordable.

Y/N

AG Communication Systems GTD-5 Cartridge Guide

213

Chapter 4: Service Definition

Table 277: C_AGCS-GTD5_4008_ADD_URCN


Parameter Name

Description

Range

Default
Value

Type

Class

URCN_CNDB

Specifies whether the calling


Y/N
number delivery blocking usage
is recordable.

URCN_CNDE

Specifies whether the calling


number delivery usage is
recordable.

Y/N

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 278: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_URCN

A_AGCS-GTD5_4008_ADD_URCN

C_AGCS-GTD5_4008_ADD_URNC
Adds the various recordable usages.
Table 279: C_AGCS-GTD5_4008_ADD_URNC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

URNC_CLJN

Call join usage recordable.

214

Oracle Corporation

Y/N

Common Service Description Layer (CSDL) commands

Table 279: C_AGCS-GTD5_4008_ADD_URNC


Parameter Name

Description

Range

Default
Value

Type

Class

URNC_CSMI

VMS call screening usage


recordable.

Y/N

URNC_DND

Do not disturb usage recordable. Y/N

URNC_TWC

Three way calling usage


recordable.

Y/N

URNC_WUPR

Wake-up or remainder usage


recordable.

Y/N

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 280: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_ADD_URNC

A_AGCS-GTD5_4008_ADD_URNC

C_AGCS-GTD5_4008_DEL_ACB
Deletes the auto call back feature from a line.
Table 281: C_AGCS-GTD5_4008_DEL_ACB
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

215

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 282: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_ACB

A_AGCS-GTD5_4008_DEL_ACB

C_AGCS-GTD5_4008_DEL_ACB-CLASS
Deletes the CLASS - auto call back feature from a line.
Table 283: C_AGCS-GTD5_4008_DEL_ACB-CLASS
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 284: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_ACB-CLASS

216

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_DEL_ACB-CLASS

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_AR
Deletes the automatic recall feature from a line.
Table 285: C_AGCS-GTD5_4008_DEL_AR
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 286: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_AR

A_AGCS-GTD5_4008_DEL_AR

C_AGCS-GTD5_4008_DEL_ATWC
Deletes the always available usage sensitive three-way calling feature.
Table 287: C_AGCS-GTD5_4008_DEL_ATWC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

217

Chapter 4: Service Definition

Table 287: C_AGCS-GTD5_4008_DEL_ATWC


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 288: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_ATWC

A_AGCS-GTD5_4008_DEL_ATWC

C_AGCS-GTD5_4008_DEL_BLOCK-PC
Deletes the prefix call blocking feature from a line.
Table 289: C_AGCS-GTD5_4008_DEL_BLOCK-PC
Parameter Name

Description

Range

Default
Value

Type

Class

B0PS

Do not Block 0+ dialing?

B1PS

Do not Block 1+ dialing?

BIDD

Do not Block 011+ dialing?

BIE3

Do not Block 01+ dialing?

BLKP

Do not Block prefix calls

BZMS

Do not Block 0- dialing?

BZZM

Do not Block 00- dialing?

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

218

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 289: C_AGCS-GTD5_4008_DEL_BLOCK-PC


Parameter Name

Description

Range

Default
Value

Type

Class

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 290: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_BLOCK-PC

A_AGCS-GTD5_4008_DEL_BLOCK-PC

C_AGCS-GTD5_4008_DEL_BLOCK-TCT
Deletes the translation call type blocking feature from a line.
Table 291: C_AGCS-GTD5_4008_DEL_BLOCK-TCT
Parameter Name

Description

Range

Default
Value

Type

Class

B556

Do not Block 556 calls.

Y/N

B700

Do not Block 700 calls.

Y/N

B900

Do not Block 900 calls.

Y/N

B976

Do not Block 976 calls.

Y/N

BLDA

Do not block local directory


assistance calls.

Y/N

BLKT

Do not block translation call


type calls.

Y/N

AG Communication Systems GTD-5 Cartridge Guide

219

Chapter 4: Service Definition

Table 291: C_AGCS-GTD5_4008_DEL_BLOCK-TCT


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 292: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_BLOCK-TCT

A_AGCS-GTD5_4008_DEL_BLOCK-TCT

C_AGCS-GTD5_4008_DEL_CALL-PICKUP
Deletes the call pickup - directed, group, or extended feature from a line.
Table 293: C_AGCS-GTD5_4008_DEL_CALL-PICKUP
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

220

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 293: C_AGCS-GTD5_4008_DEL_CALL-PICKUP


Parameter Name
NXX

Description

Range

Default
Value

Exchange of the DN.

Type
S

Class
O

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 294: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CALL-PICKUP

A_AGCS-GTD5_4008_DEL_CALL-PICKUP

C_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL
Deletes the caller ID block per line.
Table 295: C_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

221

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 296: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL

A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL

C_AGCS-GTD5_4008_DEL_CALLING-NN
Deletes the calling name and number delivery.
Table 297: C_AGCS-GTD5_4008_DEL_CALLING-NN
Parameter Name

Description

Range

Default
Value

Type

Class

CLND

Calling name delivery.

Y/N

CNDE

Calling number delivery.

Y/N

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 298: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_CALLING-NN

222

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_DEL_CALLING-NN

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_CDGG
Deletes the control party for the group features.
Table 299: C_AGCS-GTD5_4008_DEL_CDGG
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 300: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CDGG

A_AGCS-GTD5_4008_DEL_CDGG

C_AGCS-GTD5_4008_DEL_CFF-AC
Deletes the call forward fixed all calls.
Table 301: C_AGCS-GTD5_4008_DEL_CFF-AC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

223

Chapter 4: Service Definition

Table 301: C_AGCS-GTD5_4008_DEL_CFF-AC


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 302: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CFF-AC

A_AGCS-GTD5_4008_DEL_CFF-AC

C_AGCS-GTD5_4008_DEL_CFF-BC
Deletes the call forward fixed busy.
Table 303: C_AGCS-GTD5_4008_DEL_CFF-BC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

224

Oracle Corporation

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 304: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CFF-BC

A_AGCS-GTD5_4008_DEL_CFF-BC

C_AGCS-GTD5_4008_DEL_CFF-GRP-AC
Deletes the call forward group fixed all calls feature.
Table 305: C_AGCS-GTD5_4008_DEL_CFF-GRP-AC
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 306: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CFF-GRP-AC

A_AGCS-GTD5_4008_DEL_CFF-GRP-AC

C_AGCS-GTD5_4008_DEL_CFF-GRP-BC
Deletes the call forward group fixed busy calls feature.
Table 307: C_AGCS-GTD5_4008_DEL_CFF-GRP-BC
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

AG Communication Systems GTD-5 Cartridge Guide

225

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 308: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CFF-GRP-BC

A_AGCS-GTD5_4008_DEL_CFF-GRP-BC

C_AGCS-GTD5_4008_DEL_CFF-UC
Deletes the call forward fixed - unanswered calls.
Table 309: C_AGCS-GTD5_4008_DEL_CFF-UC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 310: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_CFF-UC

226

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_DEL_CFF-UC

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_CFV-AC
Deletes the call forward variable all calls feature from a line.
Table 311: C_AGCS-GTD5_4008_DEL_CFV-AC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 312: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CFV-AC

A_AGCS-GTD5_4008_DEL_CFV-AC

C_AGCS-GTD5_4008_DEL_CFV-BC
Deletes the call forward variable busy calls feature from a line.
Table 313: C_AGCS-GTD5_4008_DEL_CFV-BC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

227

Chapter 4: Service Definition

Table 313: C_AGCS-GTD5_4008_DEL_CFV-BC


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 314: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CFV-BC

A_AGCS-GTD5_4008_DEL_CFV-BC

C_AGCS-GTD5_4008_DEL_CFV-GRP-AC
Deletes the call forward group all calls feature from a line.
Table 315: C_AGCS-GTD5_4008_DEL_CFV-GRP-AC
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 316: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_CFV-GRP-AC

228

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_DEL_CFV-GRP-AC

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_CFV-GRP-BC
Deletes the call forward group variable busy calls feature.
Table 317: C_AGCS-GTD5_4008_DEL_CFV-GRP-BC
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 318: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CFV-GRP-BC

A_AGCS-GTD5_4008_DEL_CFV-GRP-BC

C_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC
Deletes the call forward group shared variable busy calls feature.
Table 319: C_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 320: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC

ASDL
A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC

AG Communication Systems GTD-5 Cartridge Guide

229

Chapter 4: Service Definition

C_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC
Deletes the call forward group shared variable unanswered calls feature.
Table 321: C_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 322: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC

A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC

C_AGCS-GTD5_4008_DEL_CFV-UC
Deletes the call forward variable unanswered calls feature from a line.
Table 323: C_AGCS-GTD5_4008_DEL_CFV-UC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

230

Oracle Corporation

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 324: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CFV-UC

A_AGCS-GTD5_4008_DEL_CFV-UC

C_AGCS-GTD5_4008_DEL_CH
Deletes the call hold feature from a line.
Table 325: C_AGCS-GTD5_4008_DEL_CH
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 326: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_CH

ASDL
A_AGCS-GTD5_4008_DEL_CH

AG Communication Systems GTD-5 Cartridge Guide

231

Chapter 4: Service Definition

C_AGCS-GTD5_4008_DEL_COT
Deletes the customer originated trace feature from a line.
Table 327: C_AGCS-GTD5_4008_DEL_COT
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 328: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_COT

A_AGCS-GTD5_4008_DEL_COT

C_AGCS-GTD5_4008_DEL_CW
Deletes the call waiting feature from a line.
Table 329: C_AGCS-GTD5_4008_DEL_CW
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

232

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 329: C_AGCS-GTD5_4008_DEL_CW


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 330: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CW

A_AGCS-GTD5_4008_DEL_CW

C_AGCS-GTD5_4008_DEL_CWO
Deletes the call waiting originating feature from a line.
Table 331: C_AGCS-GTD5_4008_DEL_CWO
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

233

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 332: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_CWO

A_AGCS-GTD5_4008_DEL_CWO

C_AGCS-GTD5_4008_DEL_DCW
Deletes the distinctive call waiting feature from a line.
Table 333: C_AGCS-GTD5_4008_DEL_DCW
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 334: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_DCW

234

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_DEL_DCW

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_DP
Deletes the dial pulse.
Table 335: C_AGCS-GTD5_4008_DEL_DP
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 336: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_DP

A_AGCS-GTD5_4008_DEL_DP

C_AGCS-GTD5_4008_DEL_DR
Disables the distinctive ring.
Table 337: C_AGCS-GTD5_4008_DEL_DR
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

AG Communication Systems GTD-5 Cartridge Guide

235

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 338: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_DR

A_AGCS-GTD5_4008_DEL_DR

C_AGCS-GTD5_4008_DEL_DS
Deletes the data security.
Table 339: C_AGCS-GTD5_4008_DEL_DS
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 340: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_DS

236

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_DEL_DS

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_DTM
Deletes the denied termination feature.
Table 341: C_AGCS-GTD5_4008_DEL_DTM
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 342: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_DTM

A_AGCS-GTD5_4008_DEL_DTM

C_AGCS-GTD5_4008_DEL_FLAS
Unsets the on hook treatment field.
Table 343: C_AGCS-GTD5_4008_DEL_FLAS
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

237

Chapter 4: Service Definition

Table 343: C_AGCS-GTD5_4008_DEL_FLAS


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 344: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_FLAS

A_AGCS-GTD5_4008_DEL_FLAS

C_AGCS-GTD5_4008_DEL_HGRP
Deletes an hunt group.
Table 345: C_AGCS-GTD5_4008_DEL_HGRP
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 346: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_HGRP

238

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_DEL_HGRP

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_ICID
Deletes the Intra LATA PIC.
Table 347: C_AGCS-GTD5_4008_DEL_ICID
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 348: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_ICID

A_AGCS-GTD5_4008_DEL_ICID

C_AGCS-GTD5_4008_DEL_LDDA
Deletes the long distance distinctive ringing and/or distinctive call waiting tone.
Table 349: C_AGCS-GTD5_4008_DEL_LDDA
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

239

Chapter 4: Service Definition

Table 349: C_AGCS-GTD5_4008_DEL_LDDA


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 350: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_LDDA

A_AGCS-GTD5_4008_DEL_LDDA

C_AGCS-GTD5_4008_DEL_LINE
Deletes a line.
Table 351: C_AGCS-GTD5_4008_DEL_LINE
Parameter Name

Description

Range

Default
Value

Type

Class

BGRP

Business group number or


Logical conference number.

DLSM

One of the following:

No originations allowed
(DL)
Originations allowed to
select terminations (LI)

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

240

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 351: C_AGCS-GTD5_4008_DEL_LINE


Parameter Name
LLNP

Description

Range

Default
Value

One of the following:

Type

Class

Left by LNP number


pooling (LLNP)
Not left by LNP number
pooling (NLLN)

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

PORT

Ported out.

TDLI

One of the following:

Y/N

Changed number intercept


(CN)
Vacant Number (VN)
Intercept center (IC)
Unused directory number
study (US)

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 352: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_LINE

ASDL
A_AGCS-GTD5_4008_DEL_LINE

AG Communication Systems GTD-5 Cartridge Guide

241

Chapter 4: Service Definition

C_AGCS-GTD5_4008_DEL_LNR
Deletes the last number redial feature from a line.
Table 353: C_AGCS-GTD5_4008_DEL_LNR
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 354: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_LNR

A_AGCS-GTD5_4008_DEL_LNR

C_AGCS-GTD5_4008_DEL_MWI
Deletes the message waiting - shutter dialtone, visual, or audible ring feature from a line.
Table 355: C_AGCS-GTD5_4008_DEL_MWI
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

242

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 355: C_AGCS-GTD5_4008_DEL_MWI


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 356: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_MWI

A_AGCS-GTD5_4008_DEL_MWI

C_AGCS-GTD5_4008_DEL_ORG-DDIAL
Deletes the originator denied 10XXX or 101XXXX dialing feature from a line.
Table 357: C_AGCS-GTD5_4008_DEL_ORG-DDIAL
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

243

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 358: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_ORG-DDIAL

A_AGCS-GTD5_4008_DEL_ORG-DDIAL

C_AGCS-GTD5_4008_DEL_PARK
Deletes a call park.
Table 359: C_AGCS-GTD5_4008_DEL_PARK
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 360: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_PARK

244

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_DEL_PARK

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_SC30
Deletes the speed call 30.
Table 361: C_AGCS-GTD5_4008_DEL_SC30
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

SC3_F

Speed call 30 fixed.

Y/N

SC3_V

Speed call 30 variable.

Y/N

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 362: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_SC30

ASDL
A_AGCS-GTD5_4008_DEL_SC30

AG Communication Systems GTD-5 Cartridge Guide

245

Chapter 4: Service Definition

C_AGCS-GTD5_4008_DEL_SC8
Deletes the speed call 8.
Table 363: C_AGCS-GTD5_4008_DEL_SC8
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

SC8_F

Speed call 8 fixed.

Y/N

SC8_V

Speed call 8 variable.

Y/N

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 364: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_SC8

246

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_DEL_SC8

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_SCA
Deletes the selective call acceptance feature from a line.
Table 365: C_AGCS-GTD5_4008_DEL_SCA
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 366: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_SCA

A_AGCS-GTD5_4008_DEL_SCA

C_AGCS-GTD5_4008_DEL_SCF
Deletes the selective call forwarding feature from a line.
Table 367: C_AGCS-GTD5_4008_DEL_SCF
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

247

Chapter 4: Service Definition

Table 367: C_AGCS-GTD5_4008_DEL_SCF


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 368: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_SCF

A_AGCS-GTD5_4008_DEL_SCF

C_AGCS-GTD5_4008_DEL_SCR
Deletes the selective call reject feature from a line.
Table 369: C_AGCS-GTD5_4008_DEL_SCR
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

248

Oracle Corporation

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 370: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_SCR

A_AGCS-GTD5_4008_DEL_SCR

C_AGCS-GTD5_4008_DEL_SCW
Deletes the selective call waiting feature from a line.
Table 371: C_AGCS-GTD5_4008_DEL_SCW
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 372: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_SCW

ASDL
A_AGCS-GTD5_4008_DEL_SCW

AG Communication Systems GTD-5 Cartridge Guide

249

Chapter 4: Service Definition

C_AGCS-GTD5_4008_DEL_SET-TDP
Clears the AIN trigger.
Table 373: C_AGCS-GTD5_4008_DEL_SET-TDP
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 374: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_SET-TDP

A_AGCS-GTD5_4008_DEL_SET-TDP

C_AGCS-GTD5_4008_DEL_SNR
Deletes the saved number redial feature from a line.
Table 375: C_AGCS-GTD5_4008_DEL_SNR
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

250

Oracle Corporation

Common Service Description Layer (CSDL) commands

Table 375: C_AGCS-GTD5_4008_DEL_SNR


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 376: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_SNR

A_AGCS-GTD5_4008_DEL_SNR

C_AGCS-GTD5_4008_DEL_SR-DR
Deletes the smart ring distinctive ringing feature from a line.
Table 377: C_AGCS-GTD5_4008_DEL_SR-DR
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

AG Communication Systems GTD-5 Cartridge Guide

251

Chapter 4: Service Definition

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 378: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_SR-DR

A_AGCS-GTD5_4008_DEL_SR-DR

C_AGCS-GTD5_4008_DEL_SSO
Deletes the special screening on origination.
Table 379: C_AGCS-GTD5_4008_DEL_SSO
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 380: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_SSO

252

Oracle Corporation

ASDL
A_AGCS-GTD5_4008_DEL_SSO

Common Service Description Layer (CSDL) commands

C_AGCS-GTD5_4008_DEL_TDP
Deletes a trigger detection point.
Table 381: C_AGCS-GTD5_4008_DEL_TDP
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 382: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_TDP

A_AGCS-GTD5_4008_DEL_TDP

C_AGCS-GTD5_4008_DEL_TDS
Removes a translation data set.
Table 383: C_AGCS-GTD5_4008_DEL_TDS
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

AG Communication Systems GTD-5 Cartridge Guide

253

Chapter 4: Service Definition

Table 383: C_AGCS-GTD5_4008_DEL_TDS


Parameter Name

Description

Range

Default
Value

Type

Class

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 384: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_TDS

A_AGCS-GTD5_4008_DEL_TDS

C_AGCS-GTD5_4008_DEL_TEMP-DC
Disables a temporary disconnect.
Table 385: C_AGCS-GTD5_4008_DEL_TEMP-DC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

254

Oracle Corporation

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 386: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_TEMP-DC

A_AGCS-GTD5_4008_DEL_TEMP-DC

C_AGCS-GTD5_4008_DEL_TRDP
Deletes a translation detection point.
Table 387: C_AGCS-GTD5_4008_DEL_TRDP
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 388: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_TRDP

ASDL
A_AGCS-GTD5_4008_DEL_TRDP

AG Communication Systems GTD-5 Cartridge Guide

255

Chapter 4: Service Definition

C_AGCS-GTD5_4008_DEL_TWC
Deletes the three way calling feature.
Table 389: C_AGCS-GTD5_4008_DEL_TWC
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 390: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_TWC

A_AGCS-GTD5_4008_DEL_TWC

C_AGCS-GTD5_4008_DEL_UCD
Deletes the uniform call distribution feature.
Table 391: C_AGCS-GTD5_4008_DEL_UCD
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

256

Oracle Corporation

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 392: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_DEL_UCD

A_AGCS-GTD5_4008_DEL_UCD

C_AGCS-GTD5_4008_DEL_UCR
Deletes an unidentified call rejection feature from a line.
Table 393: C_AGCS-GTD5_4008_DEL_UCR
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 394: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_DEL_UCR

ASDL
A_AGCS-GTD5_4008_DEL_UCR

AG Communication Systems GTD-5 Cartridge Guide

257

Chapter 4: Service Definition

C_AGCS-GTD5_4008_MOD_CID
Changes an inter LATA toll carrier.
Table 395: C_AGCS-GTD5_4008_MOD_CID
Parameter Name

Description

Range

Default
Value

Type

Class

CID

Intra carrier ID.

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 396: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_MOD_CID

A_AGCS-GTD5_4008_MOD_CID

C_AGCS-GTD5_4008_MOD_DN
Changes a telephone number.
Table 397: C_AGCS-GTD5_4008_MOD_DN
Parameter Name
DN

258

Description
Directory number. Must include
either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

Oracle Corporation

Range

Default
Value

Type
S

Class
O

Common Service Description Layer (CSDL) commands

Table 397: C_AGCS-GTD5_4008_MOD_DN


Parameter Name

Description

Range

Default
Value

Type

Class

LINE

Line of the DN.

NEW_DN

New directory number. Must


include either NEW_DN or
NEW_NPA (if 10-digit switch),
NEW_NXX, and NEW_LINE,
or HGRP_NUM.

NEW_LINE

Line of the new DN.

NEW_NPA

Area code of the new DN.

NEW_NXX

Exchange of the new DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 398: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_MOD_DN

A_AGCS-GTD5_4008_MOD_DN

C_AGCS-GTD5_4008_MOD_HG-SIZE
Changes the size of an hunt group.
Table 399: C_AGCS-GTD5_4008_MOD_HG-SIZE
Parameter Name

Description

Range

Default
Value

Type

Class

HGRP_NUM

Hunt group number.

NE_ID_AGCS-GTD5

Remote network element name.

AG Communication Systems GTD-5 Cartridge Guide

259

Chapter 4: Service Definition

Table 399: C_AGCS-GTD5_4008_MOD_HG-SIZE


Parameter Name

Description

SIZE

Range

Default
Value

New size of the group.

Type
S

Class
R

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 400: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_MOD_HG-SIZE

A_AGCS-GTD5_4008_MOD_HG-SIZE

C_AGCS-GTD5_4008_MOD_ICID
Changes an intra LATA toll carrier.
Table 401: C_AGCS-GTD5_4008_MOD_ICID
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

ICID

Inter Carrier ID.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

260

Oracle Corporation

Common Service Description Layer (CSDL) commands

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 402: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_MOD_ICID

A_AGCS-GTD5_4008_MOD_ICID

C_AGCS-GTD5_4008_MOD_INTERCEPT
Modifies an intercept.
Table 403: C_AGCS-GTD5_4008_MOD_INTERCEPT
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

INTERCEPT_NAME

Intercept name.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 404: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_MOD_INTERCEPT

ASDL
A_AGCS-GTD5_4008_MOD_INTERCEPT

AG Communication Systems GTD-5 Cartridge Guide

261

Chapter 4: Service Definition

C_AGCS-GTD5_4008_MOD_SCOS
Modifies the SCOS and optionally PCOS on a line.
Table 405: C_AGCS-GTD5_4008_MOD_SCOS
Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

PCOS

Primaray class of service.

SCOS

Secondary class of service.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 406: CSDL to ASDL Mapping
CSDL

ASDL

C_AGCS-GTD5_4008_MOD_SCOS

A_AGCS-GTD5_4008_MOD_SCOS

C_AGCS-GTD5_4008_MOD_SUB-GROUP
Changes the sub group on a line.
Table 407: C_AGCS-GTD5_4008_MOD_SUB-GROUP
Parameter Name
BGRP

262

Oracle Corporation

Description
Business group number or
Logical conference number.

Range

Default
Value

Type
S

Class
O

Common Service Description Layer (CSDL) commands

Table 407: C_AGCS-GTD5_4008_MOD_SUB-GROUP


Parameter Name

Description

Range

Default
Value

Type

Class

DN

Directory number. Must include


either DN or NPA (if 10-digit
switch), NXX, and LINE, or
HGRP_NUM.

LINE

Line of the DN.

NE_ID_AGCS-GTD5

Remote network element name.

NPA

Area code of the DN.

NXX

Exchange of the DN.

SUB_GRP

Sub group.

Mapping to ASDLs
The following table illustrates the CSDL to ASDL mapping for this service.
Table 408: CSDL to ASDL Mapping
CSDL
C_AGCS-GTD5_4008_MOD_SUB-GROUP

ASDL
A_AGCS-GTD5_4008_MOD_SUB-GROUP

AG Communication Systems GTD-5 Cartridge Guide

263

Chapter 4: Service Definition

264

Oracle Corporation

Configuring ASAP to Support Additional NE


Instances
You can configure ASAP to support the AGCS - NEP configuration using the Service
Activation Configuration Tool (SACT). Refer to the ASAP Administration Guide for more
information.
Below is an example of the Activation.Configuration.XML file for the AGCS GTD-5
Cartridge Guide.
<?xml version="1.0" encoding="UTF-8"?>
<activationConfig xmlns="http://www.metasolv.com/ServiceActivation/
2003/ActivationConfig" xmlns:xsi="http://www.w3.org/2001/XMLSchemainstance" xsi:schemaLocation="http://www.metasolv.com/ServiceActivation/2003/ActivationConfig
D:\XSD\ActivationConfig.xsd">
<connectionPool name="GTD5POOL">
<device name="AGCSGTD5_telnet_dev1">
<environment>MY_ASAP_SYS</environment>
<lineType>TELNET_CONNECTION</lineType>
</device>
</connectionPool>
<element name="AGCS-GTD5_4008-HOST">
<technology>AGCS-GTD5</technology>
<softwareLoad>4008</softwareLoad>
<nepServerName>$NEP</nepServerName>
<primaryPool>GTD5POOL</primaryPool>
<maximumConnections>5</maximumConnections>
<dropTimeout>2</dropTimeout>
<spawnThreshold>1</spawnThreshold>
<killThreshold>0</killThreshold>
<routingElement name="AGCS-GTD5_4008-HOST">
<atomicService/>
</routingElement>
<communicationParameter>
<label>HOST_IPADDR</label>
<value>
<value>127.0.0.1</value>
</value>
<description>The IP Address of Server</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>PORT</label>
<value>

AG Communication Systems GTD-5 Cartridge Guide

265

Chapter 5: Configuring ASAP to Support Additional NE Instances

<value>23</value>
</value>
<description>Port number</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>HOST_USERID</label>
<value>
<value>USER</value>
</value>
<description>User id for Login</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>HOST_PASSWORD</label>
<value>
<value>PASSWORD</value>
</value>
<description>Password for Login</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>OPEN_TIMEOUT</label>
<value>
<value>20</value>
</value>
<description>Connection Timeout in Seconds.</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>READ_TIMEOUT</label>
<value>
<value>30</value>
</value>
<description>Read Timeout in Seconds.</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>LOGIN_PROMPT</label>
<value>
<value>login:</value>
</value>
<description>Login Prompt.</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>PASSWORD_PROMPT</label>
<value>
<value>Password:</value>
</value>
<description>Password prompt.</description>

266

Oracle Corporation

<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>PROMPT</label>
<value>
<value>;</value>
</value>
<description>Provisioning Prompt</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>ACCESS_GUARD</label>
<value>
<value>Y</value>
</value>
<description>Flag to turn on or off Access Guard gateway.
</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>DESTINATION_ID</label>
<value>
<value>DEST1</value>
</value>
<description>Destination Identification number.
</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>DESTINATION_PROMPT</label>
<value>
<value>Destination:</value>
</value>
<description>Destination Prompt</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
<communicationParameter>
<label>RESPONSELOG</label>
<value>
<value>TRUE</value>
</value>
<description>Flag to turn on or off response logging.
</description>
<deviceName>COMMON_DEVICE_CFG</deviceName>
<lineType>TELNET_CONNECTION</lineType>
</communicationParameter>
</element>
</activationConfig>

AG Communication Systems GTD-5 Cartridge Guide

267

Chapter 5: Configuring ASAP to Support Additional NE Instances

Extracting source files


Before you can access an XML file to modify it, you must extract it from the sar file. Use the
following procedure to extract source files from the sar file.
To extract source files
1. If necessary, create a repository directory under
/AGCS_GTDF_4008, copy the .sar file to the new directory and un-jar the sar file, as
described by Step 1 through Step 4 in Modifying agcs_gtd5_4008_pots_ne_config.xml
on page 11.
2. After you un-jar the sar file, you can access the XML files.

Loading a new XML file


When you finish modifying an XML, you must create a new sar file, then restart the cartridge
using the new file.
Follow the instructions in Modifying agcs_gtd5_4008_pots_ne_config.xml on page 11 for
directions on how to load a new XML file.

268

Oracle Corporation

Appendix A: Description of the feature


parameters and their options
List of features and their options
Table 409: List of features and their options
Feature

Options

Description

AACB

CBAC

Attendant call blocking active.

AACB

CBNA

Attendant call blocking not active


(output only).

ACA

ACA

Annoyance call flash activation.

ACA

NACA

No annoyance call alarm.

ACBC

ACBB

Automatic call-back calling, no


restriction.

ACBC

ACBC

Automatic call-back calling,


restricted to calling within the
business group (input on SUBG
only).

ACBC

NACB

No automatic call-back calling.

ACBD

ACBD

CLASS version automatic call-back


calling allowed.

ACBD

NCBD

Non-CLASS version automatic


call-back calling allowed.

ACC

ACC

Annoyance call code activation.

ACC

NACC

No annoyance call code activation.

ACD

ACD

Annoyance call digit activation.

AG Communication Systems GTD-5 Cartridge Guide

269

Table 409: List of features and their options


Feature

Options

Description

ACD

NACD

No annoyance call digit activation.

ACDA

FDAA

Fixed call forwarding all calls


active (output only).

ACDA

NDAA

Call forwarding all calls not active


(output only).

ACDA

VDAA

Variable call forwarding all calls


active (output only).

ACDB

FDBA

Fixed call forwarding busy line


active (output only).

ACDB

NDBA

Call forwarding busy line not active


(output only).

ACDB

VDBA

Variable call forwarding busy line


active (output only).

ACDN

FDNA

Fixed call forwarding no answer


active (output only).

ACDN

NDNA

Call forwarding no answer not


active (output only).

ACDN

VDNA

Variable call forwarding no answer


active (output only).

ACDS

FDSA

Fixed selective call forwarding


active (output only).

ACDS

NDSA

Selective call waiting not active


(output only).

ACDS

VDSA

Selective call forwarding active


(output only).

ACLK

CLAC

Call lock active (output only).

ACLK

CLNA

Call lock not active (output only).

ACND

DBAC

Calling number delivery blocking


active (output only).

270

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

ACND

DBNA

Calling number delivery blocking


not active (output only).

ACO

ACO

Annoyance call originator.

ACO

NACO

Not an annoyance call originator.

ACRF

CFAC

Call curfew active (output only).

ACRF

CFNA

Call curfew not active (output only)

ACSM

CSAC

VMS call screening active (output


only).

ACSM

CSNA

VMS call screening not active


(output only).

ACT

ACT

Annoyance call terminator.

ACT

NACT

Not an annoyance call terminator.

ACWT

BCWA

Selective and terminating call


waiting active (output only).

ACWT

NCWA

Call waiting not active (output


only).

ACWT

SCWA

Selective call waiting active (output


only).

ACWT

TCWA

Call waiting terminating active


(output only).

ADAL

DAAC

Distinctive alerting active (output


only).

ADAL

DANA

Distinctive alerting not active


(output only).

ADN

ADN

Associate directory number.

ADND

DDAC

Do not disturb active (output only)

ADND

DDNA

Do not disturb not active (output


only).

AG Communication Systems GTD-5 Cartridge Guide

271

Table 409: List of features and their options


Feature

Options

Description

ALN

ALN

Class A line.

ALN

NALN

Not a class A line.

ALRT

ABBV

Abbreviated alerting.

ALRT

ALRT

Alerting pattern.

ALRT

DELA

Delayed alerting

ALRT

NALD

No alerting with display.

ALRT

NALR

No alerting without display.

ALRT

NORM

Normal alerting.

AMAO

NACR

No authorization code recording.

AMAO

RACT

Record as an account code.

AMAO

RAUT

Record as an authorization code.

AMEM

AMEM

AIOD group member number.

AMWI

MWAC

Message waiting indication active


(output only).

AMWI

MWNA

Message waiting indication not


active (output only).

AMWP

MPAC

Message waiting periodic ringing


active (output only).

AMWP

MPNA

Message waiting periodic ringing


not active (output only).

ARCC

ARCB

Automatic recall calling.

ARCC

ARCC

Automatic recall calling, intragroup


(input on SUBG only).

ARCC

NARC

No automatic recall calling.

ARNE

ARNE

Automatic recall with name


exception.

272

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

ARNE

NRNE

No automatic recall with name


exception.

ASCT

NSCT

Selective call termination not active


(output only).

ASCT

SCAA

Selective call acceptance active


(output only).

ASCT

SCRA

Selective call rejection active


(output only).

ASIM

SMAC

SimulRing active (output only).

ASIM

SMNA

SimulRing not active (output only).

ATCB

ATCB

Attendant call blocking allowed


(input on SUBG only).

ATCB

NATC

No attendant call blocking (input on


SUBG only).

ATCN

TCAC

Talking calling name with voice


activated (output only).

ATCN

TCNA

Talking calling name with voice not


activated (output only).

ATWC

ATWC

Always available usage sensitive


three-way calling.

ATWC

NATW

No always available usage sensitive


three-way calling.

AUTH

AUTH

Authorization code required.

AUTH

LCDN

Local directory number.

AUTH

NAUT

No authorization code required.

AWIS

WISA

Who's calling active for specified


DN (output only).

B110

B110

110 bps rate allowed for both


origination and termination.

AG Communication Systems GTD-5 Cartridge Guide

273

Table 409: List of features and their options


Feature

Options

Description

B110

N110

110 bps rate not allowed.

B110

O110

110 bps rate allowed for origination


only.

B110

T110

110 bps rate allowed for


termination only.

B12C

B12C

1200 bps rate allowed for both


origination and termination.

B12C

N12C

1200 bps rate not allowed.

B12C

O12C

1200 bps rate allowed for


origination only.

B12C

T12C

1200 bps rate allowed for


termination only.

B150

B150

150 bps rate allowed for both


origination and termination.

B150

N150

150 bps rate not allowed.

B150

O150

150 bps rate allowed for origination


only.

B150

T150

150 bps rate allowed for


termination only.

B19K

B19K

19.2K bps rate allowed for both


origination and termination.

B19K

N19K

19.2K bps rate not allowed.

B19K

O19K

19.2K bps rate allowed for


origination only.

B19K

T19K

19.2K bps rate allowed for


termination only.

B24C

B24C

2400 bps rate allowed for both


origination and termination.

B24C

N24C

2400 bps rate not allowed.

274

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

B24C

O24C

2400 bps rate allowed for


origination only.

B24C

T24C

2400 bps rate allowed for


termination only.

B300

B300

300 bps rate allowed for both


origination and termination.

B300

N300

300 bps rate not allowed.

B300

O300

300 bps rate allowed for origination


only.

B300

T300

300 bps rate allowed for


termination only.

B36C

B36C

3600 bps rate allowed for both


origination and termination.

B36C

N36C

3600 bps rate not allowed.

B36C

O36C

3600 bps rate allowed for


origination only.

B36C

T36C

3600 bps rate allowed for


termination only.

B48C

B48C

4800 bps rate allowed for both


origination and termination.

B48C

N48C

4800 bps rate not allowed.

B48C

O48C

4800 bps rate allowed for


origination only.

B48C

T48C

4800 bps rate allowed for


termination only.

B48K

B48K

48K bps rate allowed for both


origination and termination.

B48K

N48K

48K bps rate not allowed.

B48K

O48K

48K bps rate allowed for


origination only.

AG Communication Systems GTD-5 Cartridge Guide

275

Table 409: List of features and their options


Feature

Options

Description

B48K

T48K

48K bps rate allowed for


termination only.

B50B

B50B

50 bps rate allowed for both


origination and termination.

B50B

N50B

50 bps rate not allowed.

B50B

O50B

50 bps rate allowed for origination


only.

B50B

T50B

50 bps rate allowed for termination


only.

B56K

B56K

56K bps rate allowed for both


origination and termination.

B56K

N56K

56K bps rate not allowed.

B56K

O56K

56K bps rate allowed for


origination only.

B56K

T56K

56K bps rate allowed for


termination only.

B600

B600

600 bps rate allowed for both


origination and termination.

B600

N600

600 bps rate not allowed.

B600

O600

600 bps rate allowed for origination


only.

B600

T600

600 bps rate allowed for


termination only.

B64K

B64K

64K bps rate allowed for both


origination and termination.

B64K

N64K

64K bps rate not allowed.

B64K

O64K

64K bps rate allowed for


origination only.

B64K

T64K

64K bps rate allowed for


termination only.

276

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

B72C

B72C

7200 bps rate allowed for both


origination and termination.

B72C

N72C

7200 bps rate not allowed

B72C

O72C

7200 bps rate allowed for


origination only.

B72C

T72C

7200 bps rate allowed for


termination only.

B75B

B75B

75 bps rate allowed for both


origination and termination.

B75B

N75B

75 bps rate not allowed.

B75B

O75B

75 bps rate allowed for origination


only.

B75B

T75B

75 bps rate allowed for termination


only.

B96C

B96C

9600 bps rate allowed for both


origination and termination.

B96C

N96C

9600 bps rate not allowed.

B96C

O96C

9600 bps rate allowed for


origination only.

B96C

T96C

9600 bps rate allowed for


termination only.

BAL

LDDL

Loaded loop.

BAL

LNGL

Long loop.

BAL

NRMB

Normal balance.

BCE

AUTO

Automatic.

BCE

BCE

Bridged Call Exclusion.

BCE

MANL

Manual.

AG Communication Systems GTD-5 Cartridge Guide

277

Table 409: List of features and their options


Feature

Options

Description

BCHN

NBCH

Number of B-channels not


applicable.

BGRP

BGRP

Business group number.

BGRP

LCN

Logical conference number.

BLKP

B0PS

Block 0+ calls.

BLKP

B1PS

Block 1+ calls.

BLKP

BIDD

Block 011+ calls.

BLKP

BIE3

Block 01+ calls.

BLKP

BLKP

Block prefix calls.

BLKP

BZMS

Block 0- calls.

BLKP

BZZM

Block 00- calls.

BLKP

NB0P

No blocking of 0+ calls.

BLKP

NB1P

No blocking of 1+ calls.

BLKP

NBIE

No blocking of 01+ calls.

BLKP

NBZM

No blocking of 0- calls.

BLKP

NBZZ

No blocking of 00- calls.

BLKT

B556

Block 556 calls.

BLKT

B700

Block 700 calls.

BLKT

B900

Block 900 calls.

BLKT

B976

Block 976 calls.

BLKT

BLDA

Block local directory assistance


calls.

BLKT

BLKT

Block translation call type calls.

BLKT

N556

No blocking of 556 calls.

BLKT

N700

No blocking of 700 calls.

278

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

BLKT

N900

No blocking of 900 calls.

BLKT

N976

No blocking of 976 calls.

BLKT

NBLD

No blocking of local directory


assistance calls.

BLKU

BLKU

Block user-defined call type calls.

BLKU

BLU1

Block user-defined call type 1 calls.

BLKU

BLU2

Block user-defined call type 2 calls.

BLKU

BLU3

Block user-defined call type 3 calls.

BLKU

BLU4

Block user-defined call type 4 calls.

BLKU

BLU5

Block user-defined call type 5 calls.

BLKU

NBL1

No blocking of user-defined call


type 1 calls.

BLKU

NBL2

No blocking of user-defined call


type 2 calls.

BLKU

NBL3

No blocking of user-defined call


type 3 calls.

BLKU

NBL4

No blocking of user-defined call


type 4 calls.

BLKU

NBL5

No blocking of user-defined call


type 5 calls.

CARN

CARN

Centralized announcement routing


number.

CARN

SFAC

Special feature announcement code


DN.

CBGG

CBGG

Control party for business group


group features.

CBGG

NBGG

Not a control party for business


group group features.

AG Communication Systems GTD-5 Cartridge Guide

279

Table 409: List of features and their options


Feature

Options

Description

CBGS

CBGS

Control party for business group


shared features.

CBGS

NCBG

Not a control party for business


group shared features.

CCLG

CCLG

Code call digit string length.

CDDC

CDBG

Called party control if in the same


business group.

CDDC

CDPT

Called party control.

CDDC

CDUS

Called party supervision uncertain.

CDDC

FR

CAMA forced release.

CDDC

JC

Joint control.

CDDC

ROCG

Calling party release only.

CDDC

TR

Timed release.

CDGG

CDGG

Control party for device group


group features.

CDGG

NCGG

Not a control party for device group


group features.

CDGS

CDGS

Control party for device group


shared features.

CDGS

NCDG

Not a control party for hunt group


shared features.

CDOU

CDOU

Carrier designation source.

CF16

CF16

Conference calling 16.

CF16

NC16

No conference calling 16.

CF24

CF24

Conference calling 24.

CF24

NC24

No conference calling 24.

CFC8

CFC8

Conference calling 8.

280

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

CFC8

NCF8

No conference calling 8.

CFMM

CFMM

Meet-me conference calling (input


on SUBG only).

CFMM

NCMM

No meet-me conference calling


(input on SUBG only).

CGDC

CGBG

Calling party control if in the same


business group.

CGDC

CGC

Calling party control.

CGDC

CGR

Calling party release.

CGDC

CGRO

Calling party release only.

CGDC

CGSU

Calling party supervision uncertain.

CGND

AID

Found in AIOD receiver.

CGND

ANI

Found in ANI receiver.

CGND

BGN

Found in business group data.

CGND

CNSS

Calling number from SETUP


message and passed screening.

CGND

DGN

Stored in device group data.

CGND

NCGN

No calling number stored.

CGND

ONI

Found in ONI receiver.

CGND

QZB

Found by QZ codes.

CGND

RNXB

Found in business group RNX data.

CGND

RNXO

Office code from business group


RNX data.

CGND

STOR

Stored with line data.

CGNN

ONCN

Actual calling/billing number.

CGNN

ONDD

Calling number from device data.

AG Communication Systems GTD-5 Cartridge Guide

281

Table 409: List of features and their options


Feature

Options

Description

CGNN

ONGD

Calling number from device group


data.

CGNN

ONNA

Calling number not available.

CGNN

ONSS

Originating number from the


SETUP message and passed
screening.

CHAR

CL5B

Five-bit character length (output


only).

CHAR

CL6B

Six-bit character length (output


only).

CHAR

CL7B

Seven-bit character length (output


only).

CHAR

CL8B

Eight-bit character length (output


only).

CID

CID

Pre subscribed interLATA carrier


identification number.

CID

NCID

Originator not pre subscribed to any


interLATA carrier.

CLCK

CLCK

Call lock assigned.

CLCK

NCLC

Call lock not assigned.

CNAM

CLND

Calling name delivery.

CNAM

NNAD

No calling name delivery.

CNDB

CNDB

Calling number delivery blocking.

CNDB

NCND

No calling number delivery


blocking.

CNDE

CNDE

Calling number delivery.

CNDE

NCAN

No calling number delivery.

CNVT

CNVT

Compensation verification test


allowed.

282

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

CNVT

NCNV

Compensation verification test not


allowed.

CODA

CODA

Code calling access.

CODA

NCDA

No code call access.

COTR

COTR

Customer originated trace.

COTR

NCOT

No customer originated trace.

CPPI

CPPI

Code call, paging, public address


index.

CRIX

CRIX

Carrier restriction index.

CSI

CSI

Customer service index (output


only).

CSMI

CSMI

VMS call screening.

CSMI

KFTP

Keep forwarded-to party.

CSMI

NCSM

No VMS call screening.

CSMI

NKFT

Do not keep forwarded-to party.

CSNK

CSNK

Charge sink.

CSOU

CSOU

Charge source.

CTYP

CTYP

Call type.

CTYP

DDT

Data call type, default DN on the


line.

CTYP

DPK

Packet call type, default DN on the


line.

CTYP

DT

Data call types.

CTYP

DVC

Voice call type, default DN on the


line.

CTYP

NDT

Data call type, not applied.

AG Communication Systems GTD-5 Cartridge Guide

283

Table 409: List of features and their options


Feature

Options

Description

CTYP

NPK

Packet call type, not applied.

CTYP

NVC

Voice call type, not applied.

CTYP

PK

Packet call type.

CTYP

VC

Voice call types.

CUAC

CUAC

Customized access code access


allowed.

CUAC

NCUA

No customized access code access.

CURF

CURF

Call curfew.

CURF

NCUR

No call curfew.

CURF

NTOD

No call curfew time-of-day/day-ofweek assigned.

CURF

TODA

Call curfew time-of-day/day-ofweek assigned.

CUSM

CUSM

Line can use silent monitoring


(input on SUBG only).

CUSM

NCUS

Cannot use silent monitor (input on


SUBG only).

CWO

CODE

Code-controlled call waiting.

CWO

CWO

Call waiting originating.

CWO

NCOD

Call waiting is not code controlled.

CWO

NCWO

No call waiting originating.

CWT

ANNO

Route to call waiting deluxe default


announcement.

CWT

CODE

Code-controlled call waiting.

CWT

CWCJ

Call waiting with call join.

CWT

CWD1

Call waiting deluxe type 1.

284

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

CWT

CWD2

Call waiting deluxe type 2.

CWT

CWD3

Call waiting deluxe type 3.

CWT

CWD4

Call waiting deluxe type 4.

CWT

CWD5

Call waiting deluxe type 5.

CWT

CWID

Calling identity delivery on call


waiting.

CWT

CWJI

Call waiting with call join and


calling identity delivery on call
waiting.

CWT

CWT

Call waiting terminating/additional


call offering.

CWT

FORW

Forward to call forwarding on no


answer digits.

CWT

NCOD

Not code controlled.

CWT

NCWT

No call waiting terminating.

CWT

RING

Continue ringing.

CWT

TECI

Talking call waiting enhancement


for calling identity delivery on call
waiting.

CWT

TECJ

Talking call waiting enhancement


with call join.

CWT

TED2

Talking call waiting enhancement


for call waiting deluxe type 2.

CWT

TED5

Talking call waiting enhancement


for call waiting deluxe type 5.

CWT

TEIJ

Talking call waiting enhancement


for calling identity delivery on call
waiting with call join.

CWT

TKCE

Talking call waiting enhancement.

AG Communication Systems GTD-5 Cartridge Guide

285

Table 409: List of features and their options


Feature

Options

Description

CWT

TKCI

Talking call waiting with calling


identity delivery.

CWT

TKCJ

Talking call waiting with call join.

CWT

TKCW

Talking call waiting.

CWT

TKD2

Talking call waiting with caller ID


for call waiting deluxe type 2.

CWT

TKD5

Talking call waiting with caller ID


for call waiting deluxe type 5.

CWT

TKIJ

Talking call waiting with call join


on calling identity delivery.

CXFR

CXFR

Conference transfer.

CXFR

TCOM

Restrict completely

CXFR

TDGR

Restrict to last device in the group.

CXFR

TDIS

Transfer on disconnect or explicit


request.

CXFR

TEXP

Transfer on explicit request only.

CXFR

TIGR

Restrict to within the same business


subgroup.

CXFR

TNON

No restrictions.

DAD

BDAD

Code-controlled and regular data


security device.

DAD

CDAD

Code-controlled data security


feature.

DAD

DAD

Data line security assigned at all


times.

DAD

NDAD

Not a data security device.

DAFI

ACTI

Call forwarding can be activated by


subscriber.

286

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

DAFI

DAFI

Call forwarding all calls fixed.

DAFI

NACT

Call forwarding always active.

DAFI

NAFI

No call forwarding all calls fixed.

DAFI

NTOD

Call forwarding all calls fixed


cannot be activated by time-of-day/
day-of-week basis.

DAFI

RCF

Maximum number of remote calls


forwarded out of the office.

DAFI

REM

Maximum number of normal calls


forwarded out of the office.

DAFI

TODA

Call forwarding all calls fixed can


be activated by time-of-day/ day-ofweek basis.

DAVI

ACTI

Call forwarding can be activated by


subscriber.

DAVI

DAVI

Call forwarding all calls variable.

DAVI

NACT

Call forwarding always active.

DAVI

NAVI

No call forwarding all calls


variable.

DAVI

NTOD

Call forwarding all calls variable


cannot be activated by time-of-day/
day-of-week basis.

DAVI

RCF

Maximum number of remote calls


forwarded out of the office

DAVI

REM

Maximum number of normal calls


forwarded out of the office.

DAVI

TODA

Call forwarding all calls variable


can be activated by time-of-day/
day-of-week basis.

DBFI

ACTI

Call forwarding can be activated by


subscriber.

AG Communication Systems GTD-5 Cartridge Guide

287

Table 409: List of features and their options


Feature

Options

Description

DBFI

DBFI

Call forwarding busy line fixed.

DBFI

NACT

Call forwarding always active.

DBFI

NBFI

No call forwarding busy line fixed.

DBFI

NTOD

Call forwarding busy line fixed


cannot be activated by time-of-day/
day-of-week basis.

DBFI

REM

Maximum number of normal calls


forwarded out of the office.

DBFI

TODA

Call forwarding busy line fixed can


be activated by time-of-day day-ofweek basis.

DBVI

ACTI

Call forwarding can be activated by


subscriber.

DBVI

DBVI

Call forwarding busy line variable.

DBVI

NACT

Call forwarding always active.

DBVI

NBVI

No call forwarding busy line


variable.

DBVI

NTOD

Call forwarding busy line variable


cannot be activated by time-of-day/
day-of-week basis.

DBVI

REM

Maximum number of normal calls


forwarded out of the office.

DBVI

TODA

Call forwarding busy line variable


can be activated by time-of-day/
day-of-week basis.

DCXR

DCXR

Originator denied 10XXX or


101XXXX dialing.

DCXR

NDCX

Originator not denied 10XXX or


101XXXX dialing.

DDRI

DDRI

Distinctive ringing applied to


business group (output only).

288

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

DDRI

NDDR

Distinctive ringing not applied to


business group (output only).

DDTR

DDTR

Dialed digits trigger (output only)


(Refer to Note 129 in the
COMMAND FIELDS AND
NOTES - DN section.).

DELA

BROQ

Ringback and off-hook queuing


allowed.

DELA

NODQ

No ringback or off-hook queuing


allowed.

DELA

OFHQ

Off-hook queuing allowed.

DELA

RINQ

Ringback queuing allowed.

DLSM

DL

No originations allowed.

DLSM

LI

Originations allowed to select


terminations.

DMVI

DMVI

Manual call forwarding.

DMVI

NMVI

No manual call forwarding.

DMVI

REM

Maximum number of normal calls


forwarded out of the office.

DND

DND

Do not disturb.

DND

NDND

No do not disturb.

DNFI

ACTI

Call forwarding can be activated by


subscriber.

DNFI

DNFI

Call forwarding no answer fixed.

DNFI

NACT

Call forwarding always active.

DNFI

NAT

Call forwarding no answer timing.

DNFI

NNFI

No call forwarding no answer fixed.

DNFI

NRSH

No ring cycle short.

AG Communication Systems GTD-5 Cartridge Guide

289

Table 409: List of features and their options


Feature

Options

Description

DNFI

NTOD

Call forwarding no answer fixed


cannot be activated by time-of-day/
day-of-week basis.

DNFI

REM

Maximum number of normal calls


forwarded out of the office.

DNFI

RSHR

Ring cycle short.

DNFI

TODA

Call forwarding no answer fixed


can be activated by time-of-day
day-of-week basis.

DNFI

VNAT

Subscriber can update no answer


timing.

DNVI

ACTI

Call forwarding can be activated by


subscriber.

DNVI

DNVI

Call forwarding no answer variable.

DNVI

NACT

Call forwarding always active.

DNVI

NAT

Call forwarding no answer timing.

DNVI

NNVI

No call forwarding no answer


variable.

DNVI

NTOD

Call forwarding no answer variable


cannot be activated by time of- day/
day-of-week basis.

DNVI

REM

Maximum number of normal calls


forwarded out of the office.

DNVI

TODA

Call forwarding no answer variable


can be activated by time-of-day/
day-of-week basis.

DNVI

VNAT

Subscriber can update no answer


timing.

DO

DO

Line denied origination.

DO

NDO

Line not denied origination.

290

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

DPV

DPV

Digital pad value index.

DRCW

DRCW

Distinctive ringing/call waiting.

DRCW

NDRC

No distinctive ringing/call waiting.

DRCW

NTOD

Distinctive ringing/call waiting


cannot be activated by time-of-day/
day-of-week basis.

DRCW

TODA

Distinctive ringing/call waiting can


be activated by time-of-day/ day-ofweek basis.

DRDN

DRDN

Distinctive ringing directory


number.

DRDN

NDRD

No distinctive ringing directory


number.

DREC

DREC

Full-detail call recording.

DREC

NDRE

No full-detail call recording.

DRNG

DRG1

Distinctive ringing class 1.

DRNG

DRG2

Distinctive ringing class 2.

DRNG

DRG3

Distinctive ringing class 3.

DRNG

NDRG

No distinctive ringing type.

DSR2

DSR2

Smart call 2.

DSR2

DSR3

Smart call 3.

DSR2

NDSR

No smart call 2 or smart call 3.

DSVI

DSVI

Selective call forwarding variable


individual.

DSVI

ESCF

Enhanced selective call forwarding.

DSVI

NESF

No enhanced selective call


forwarding.

AG Communication Systems GTD-5 Cartridge Guide

291

Table 409: List of features and their options


Feature

Options

Description

DSVI

NSVI

No selective call forwarding


variable individual.

DSVI

NTOD

Selective call forwarding variable


cannot be activated by time-of-day/
day-of-week basis.

DSVI

REM

Maximum number of normal calls


forwarded out of the office

DSVI

TODA

Selective call forwarding variable


can be activated by time-of-day/
day-of-week basis.

DTM

DTM

Denied termination.

DTM

NDTM

No denied termination.

DTTI

DTTI

Denied termination test indicator.

DTTI

NDTI

No denied termination test


indicator.

DTYP

ALIN

Multiplexed line module frame


(XLMF) line.

DTYP

BRIL

BRI line on a GTD-5 EAX.

DTYP

BRIT

BRI terminal on a GTD-5 EAX.

DTYP

BRRL

BRI line on a Remote Digital


Terminal (RDT).

DTYP

BRRT

BRI terminal on a RDT.

DTYP

CPCC

Hardware identifier of customerprovided equipment (output only).

DTYP

DLIN

Direct digital interface (DDI) line


hardware identity.

DTYP

LINE

Hardware location of the line.

DTYP

MLPA

Hardware location of a maintenance


loop around trunk (output only).

292

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

DTYP

MXU

MXU processor type.

DTYP

RALT

Remote digital terminal (RDT)


analog line termination.

DTYP

RLU

RLU processor type.

DTYP

RSU

RSU processor type.

DTYP

TCU

TCU processor type.

DTYP

TERM

BRI terminal number.

DUPL

DUPL

Full duplex modem or Data Adapter


(output only).

DUPL

HDPL

Half duplex modem or Data


Adapter (output only).

EKTS

EKTS

Electronic key telephone service


DN.

EKTS

NEKT

Not an EKTS DN.

EMER

EMER

Emergency directory number.

EMER

NEMR

Non-emergency directory number.

ENGC

ENGC

Engineering Session Required.

ENGC

NENG

No engineering session required.

EXMT

NZO

Only nonzero fields.

EXMT

SHOR

Most pertinent information.

EXOV

EXOV

Executive override (input on SUBG


only).

EXOV

NEXV

No executive override (input on


SUBG only).

FBSY

FBSY

Forced busy.

FBSY

NFBY

No forced busy.

AG Communication Systems GTD-5 Cartridge Guide

293

Table 409: List of features and their options


Feature

Options

Description

FLIO

FLIA

Inhibit flash always.

FLIO

FLII

Inhibit flash if intragroup.

FLIO

NFLI

No flash inhibiting.

FLRO

FLRA

Repeat flash always.

FLRO

FLRI

Repeat flash if intragroup. call.

FLRO

NFLR

No flash repeating.

FRES

FRES

Fully restricted business line (input


on SUBG only)

FRES

NFRE

Not a fully restricted business line


(input on SUBG only).

FSTT

FSTT

Voice call type of first DN added to


a BRI EKTS terminal (output only).

FWDR

FWDR

Forward disconnect required.

FWDR

NFWD

No forward disconnect required.

GND

GND

Ground start line.

GND

NGND

Loop start line.

HADM

HADM

Hotel administrative line.

HADM

NHAD

Not a hotel administrative line.

HGM

HGM

Hunt group member.

HGRP

HGRP

Hunt group.

HLDX

HLDX

Exclusive call hold (input on SUBG


only).

HLDX

NLDX

No exclusive call hold (input on


SUBG only).

HOLD

FFBD

Flip-flop by digit method.

HOLD

FFBF

Flip-flop by flash method.

294

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

HOLD

IHLD

ISDN call hold.

HOLD

NHLD

No call hold.

HPC

HPC

High probability of completion


capability.

HPC

NHPC

Not a high probability of


completion capability.

ICID

ICID

Pre subscribed intraLATA carrier


identification number.

ICID

NICI

Originator not pre subscribed to any


intraLATA carrier.

ICOM

ICOM

Intercom group number.

ICOM

NICM

No intercom group.

IDDD

IDDD

Pre subscribed international carrier


identification number.

IDDD

NIDD

Originator not pre subscribed to any


international carrier.

INFO

INFO

Information digit class.

ISAA

ISAA

In-session activation active


(output only).

ISAD

ISAD

In-session activation denial


assigned.

ISAD

NISD

In-session activation denial not


assigned.

ISP

ISP

Internet service provider index.

ISP

NISP

No internet service provider index.

JIPI

JIPI

Jurisdiction information parameter


index.

LANG

EFBS

English followed by Spanish.

AG Communication Systems GTD-5 Cartridge Guide

295

Table 409: List of features and their options


Feature

Options

Description

LANG

ENGL

English.

LANG

SPAN

Spanish.

LDDA

DRIN

Distinctive ringing for long distance


calls.

LDDA

DTON

Distinctive call waiting tone for


long distance calls.

LDDA

LDDA

Long distance distinctive alerting.

LDDA

NDRI

No distinctive ringing for long


distance calls.

LDDA

NDTO

No distinctive call waiting tone for


long distance calls.

LDDA

NLDD

No long distance distinctive


alerting.

LDDA

ODTO

Distinctive call waiting tone for


long distance calls only.

LLNP

LLNP

Left by LNP number pooling.

LLNP

NLLN

Not left by LNP number pooling.

LNPP

LNPP

LNP number pooling permitted.

LNPP

NLNP

LNP number pooling not permitted.

LNRN

LNRN

Local network routing number.

LOAD

LOAD

Loaded line.

LOAD

NONL

Not a loaded line.

LSM

NSUP

No supervision allowed.

LSM

POH

Pulsed off-hook.

LSM

RBA

Reverse battery answer.

LSM

RBH

Reverse battery hangup.

296

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

LSM

RBPA

Reverse battery pulsed answer.

LSM

SOH

Sustained off-hook.

LSM

TWP

Third wire pulsed.

LTT

LT

Line test type.

LTT

LTT

Line test type.

MASS

MASS

Mass activation group and member.

MCSR

MCSR

Multiple call setup restricted.

MCSR

NMCS

Multiple call setups not allowed.

MESS

MESS

Mass activation message.

MLR

MLR

Multilevel toll restriction (input on


SUBG only).

MLR

NMLR

No multilevel toll restriction (input


on SUBG only).

MLSG

MLSG

Multiline set group.

MNLM

MNLM

Maintenance loop-around member


(output only).

MNOC

ASCE

Ascending.

MNOC

DESC

Descending.

MNOC

MNOC

Maximum number of calls.

MNWC

MNWC

Maximum number of waiting calls.

MRS

MRS

Message rate line.

MRS

NMRS

Not a message rate line.

MSLG

MSLG

Multiset line group.

MTYP

TYPA

MXU manufacturing type 914A


(output only).

AG Communication Systems GTD-5 Cartridge Guide

297

Table 409: List of features and their options


Feature

Options

Description

MTYP

TYPB

MXU manufacturing type 914E


(output only).

MTYP

TYPS

MXU manufacturing type Series 5


FPI (output only).

MWGC

MWGC

Message waiting group controller.

MWGC

NMWG

Not a message waiting group


controller.

MWIM

ARMW

Abbreviated ringing message


waiting indication.

MWIM

MWIA

Audible message waiting


indication.

MWIM

MWIB

Both audible and visual message


waiting indication.

MWIM

MWIV

Visual message waiting indication.

MWIM

NARM

No abbreviated ringing message


waiting indication.

MWIM

NMWI

No message waiting indication.

MWIM

NPRA

No alerting.

MWIM

PRA1

15-minute alerting.

MWIM

PRA2

30-minute alerting.

MWIM

PRA3

45-minute alerting.

MWIM

PRA4

60-minute alerting.

NAD

MAPA

Map all features from the primary


DN when adding an associate DN.

NAD

NAD2

Smart call 1 (one DRDN).

NAD

NAD4

Smart call (up to three DRDNs).

NAD

NADN

No smart call.

298

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

NAD

NFEA

No features, Designer Smart Call


not assigned.

NAD

NMAP

No mapping of primary DN
features when adding an associate
DN.

NDL

NDL

Nondial line.

NDL

NNDL

No nondial service.

OARI

OARI

Originating announcement route


index.

OAV

NOAV

Originating announcement not


valid.

OAV

OAV

Originating announcement valid.

ONHT

EOPW

Recognize emergency service


bureau (ESB) operator wink.

ONHT

FLAS

Recognize hookswitch flash.

ONHT

NONH

Normal on-hook treatment.

OSE

NOSE

No originating service evaluation


study.

OSE

OSE

Originating service evaluation


study active.

OTA

NOTA

No originating traffic study on


answer.

OTA

OTA

Originating traffic study on answer


active.

OTN

NOTN

No originating traffic study on no


answer.

OTN

OTN

Originating traffic study no answer


active.

PADO

NPAD

No pad override.

AG Communication Systems GTD-5 Cartridge Guide

299

Table 409: List of features and their options


Feature

Options

Description

PADO

PADO

Pad override.

PAGE

NPAG

No paging access.

PAGE

PAGE

Paging access.

PARK

NPAR

No call park.

PARK

PARK

Call park.

PCOS

BMLH

BRI multiline hunt group member.

PCOS

BSPT

BRI DN.

PCOS

CBS

Common battery service.

PCOS

CCC

Coin prepay (DT second) with


combined receiving.

PCOS

CCD

Coin prepay (DT first) with


combined receiving.

PCOS

CCS

Coin semi-postpay with combined


receiving.

PCOS

CDC

Coin prepay (DT second) with dial


pulse receiving.

PCOS

CDD

Coin prepay (DT first) with dial


pulse receiving.

PCOS

CDS

Coin semi-postpay with dial pulse


receiving.

PCOS

CTC

Coin prepay (DT second) with


DTMF receiving.

PCOS

CTD

Coin prepay (DT first) with DTMF


receiving.

PCOS

CTS

Coin semi-postpay with DTMF


receiving.

PCOS

DATC

Data line with combined receiving.

PCOS

DATD

Data line with dial pulse receiving.

300

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

PCOS

DATT

Data line with DTMF receiving.

PCOS

DICT

Dictation line (output only).

PCOS

DMLH

Digital data line hunt group


member.

PCOS

DSPT

Digital data line.

PCOS

DTXC

DTWX with combined receiving.

PCOS

DTXD

DTWX with dial pulse receiving.

PCOS

DTXT

DTWX with DTMF receiving.

PCOS

EPS

Emergency protection service.

PCOS

ESBL

Emergency service.

PCOS

FIRE

Fire fighters' conference.

PCOS

FPHN

Featurephone.

PCOS

HMC

Hotel/motel with combined


receiving.

PCOS

HMD

Hotel/motel with dial pulse


receiving.

PCOS

HMT

Hotel/motel with DTMF receiving.

PCOS

INWC

INWATS with combined receiving.

PCOS

INWD

INWATS with dial pulse receiving.

PCOS

INWT

INWATS with DTMF receiving.

PCOS

LAMN

Maintenance loop-around member


(output only).

PCOS

MBLC

Mobile line with combined


receiving.

PCOS

MBLD

Mobile line with combined


receiving.

AG Communication Systems GTD-5 Cartridge Guide

301

Table 409: List of features and their options


Feature

Options

Description

PCOS

MBLT

Mobile line with combined


receiving.

PCOS

MLHC

Multiline hunt group member with


combined receiving.

PCOS

MLHD

Multiline hunt group member with


dial pulse receiving.

PCOS

MLHI

Multiline hunt group DDI line.

PCOS

MLHT

Multiline hunt group member with


DTMF receiving.

PCOS

MPTC

Multiparty with combined


receiving.

PCOS

MPTD

Multiparty with dial pulse


receiving.

PCOS

MPTT

Multiparty with DTMF receiving.

PCOS

PBXC

PABX line with combined


receiving.

PCOS

PBXD

PABX line with dial pulse


receiving.

PCOS

PBXI

PABX DDI line.

PCOS

PBXT

PABX line with DTMF receiving.

PCOS

PMLH

Packet multiline hunt group


member.

PCOS

PSEU

Pseudo directory number.

PCOS

RADN

Remote access directory number.

PCOS

SPTC

Single-party with combined


receiving.

PCOS

SPTD

Single-party with dial pulse


receiving.

PCOS

SPTI

Single-party DDI line.

302

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

PCOS

SPTT

Single-party with DTMF receiving.

PCOS

SWD

Switched direct line (output only).

PCOS

TPTC

Two-party with combined


receiving.

PCOS

TPTD

Two-party with dial pulse


receiving.

PCOS

TPTT

Two-party with DTMF receiving.

PCOS

TSTC

Test line with combined receiving.

PCOS

TSTD

Test line with dial pulse receiving.

PCOS

TSTT

Test line with DTMF receiving.

PCOS

VMLH

Digital voice line hunt group


member.

PCOS

VSPT

Digital voice line.

PCOS

WATC

WATS line with combined


receiving.

PCOS

WATD

WATS line with dial pulse


receiving.

PCOS

WATT

WATS line with DTMF receiving.

PERM

PERM

Permanent treatment index.

PICK

DIRD

Directed call pickup based on


dialing plan.

PICK

DIRG

Directed group call pickup.

PICK

GEN

General call pickup.

PICK

NPIC

No call pickup allowed.

PICK

PICK

Call pickup allowed.

PICK

SOHO

Small office/home office line call


management.

AG Communication Systems GTD-5 Cartridge Guide

303

Table 409: List of features and their options


Feature

Options

Description

PICK

XGEN

Extended general call pickup.

PIKD

NPKD

Line cannot be picked up.

PIKD

PIKD

Line can be picked up.

PKCS

PKCS

Packet class of service.

PLAN

PLAN

Service class plan name.

PLAN

PLNM

Service class plan name no


mapping.

PORT

PORT

Ported out.

PRDN

NPRD

No packet replacement DN.

PRDN

PRDN

Packet replacement DN.

PREF

NPRE

No preferential hunting.

PREF

PREF

Preferential hunting index.

PRIO

PRIO

Queuing priority.

PTIN

PTIN

Ported in (output only).

PTY

PTY

Party identity.

PUBA

NPUB

No public address access.

PUBA

PUBA

Public address access.

RACC

NRAC

No account code required.

RACC

RACC

Account code required.

RBC

RBC

Remote busy control point.

RBC

RLU

Remote line unit.

RBC

RSU

Remote switching unit.

RBC

TCU

Time switch and peripheral control


unit.

RBPC

COR

Control point for originations.

304

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

RBPC

COTM

Control point for originations and


terminations.

RBPC

CTM

Control point for terminations.

RBPC

NC

No control point.

RBPC

NS

No sense point.

RBPC

RBPC

Remote busy point configuration.

RBPC

SOR

Sense point for originations.

RBPC

SOTM

Sense point for originations and


terminations.

RBPC

STM

Sense point for terminations.

RBS

RBS

Remote busy sense point.

RBS

RLU

Remote line unit.

RBS

RSU

Remote switching unit.

RBS

TCU

Time switch and peripheral control


unit.

RCFA

RCFA

Remote call forwarding DN


assigned to AMA study index
(output only).

RCFT

RCFT

Remote call forwarding DN


assigned to TDA study index
(output only).

REM2

NSIM

No remote activation of SimulRing.

REM2

REM2

Remote activation of individual


features extension.

REM2

SIMR

Remote activation of SimulRing.

REMI

CURF

Remote activation of call curfew.

REMI

DAFI

Remote activation of call


forwarding all calls fixed.

AG Communication Systems GTD-5 Cartridge Guide

305

Table 409: List of features and their options


Feature

Options

Description

REMI

DAVI

Remote activation of call


forwarding all calls variable.

REMI

DBFI

Remote activation of call


forwarding busy line fixed.

REMI

DBVI

Remote activation of call


forwarding busy line variable.

REMI

DNFI

Remote activation of call


forwarding no answer fixed.

REMI

DNVI

Remote activation of call


forwarding no answer variable.

REMI

DSVI

Remote activation of selective call


forwarding variable individual.

REMI

NAFI

No remote activation of call


forwarding all calls fixed.

REMI

NAVI

No remote activation of call


forwarding all calls variable.

REMI

NBFI

No remote activation of call


forwarding busy line fixed

REMI

NBVI

No remote activation of call


forwarding busy line variable.

REMI

NCUR

No remote activation of call curfew.

REMI

NNFI

No remote activation of call


forwarding no answer fixed.

REMI

NNVI

No remote activation of call


forwarding no answer variable.

REMI

NS3V

No remote activation of speed call


30 variable.

REMI

NS8V

No remote activation of speed call 8


variable.

REMI

NSCA

No remote activation of selective


call acceptance individual.

306

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

REMI

NSCR

No remote activation of selective


call rejection individual.

REMI

NSVI

No remote activation of selective


call forwarding variable individual.

REMI

REMI

Remote activation of individual


features.

REMI

SC3V

Remote activation of speed call 30


variable.

REMI

SC8V

Remote activation of speed call 8


variable.

REMI

SCAI

Remote activation of selective call


acceptance individual.

REMI

SCRI

Remote activation of selective call


rejection individual.

REMO

REMO

Remote multiplexed line module


frame (output only).

REMO

RLU

Remote line unit (output only).

REMO

RSU

Remote switching unit (output


only).

REV

NREV

Reverting calls not allowed.

REV

REV

Revertive calls allowed.

RGND

NRGN

Remove ground on hangup.

RGND

RGND

Remove ground on release.

RING

CDED

Coded ringing on single party lines.

RING

DCAN

Four-party coded ringing with


double revertive burst.

RING

MFR

Multifrequency ringing.

RING

MNUS

Polarity of the line is minus (-).

AG Communication Systems GTD-5 Cartridge Guide

307

Table 409: List of features and their options


Feature

Options

Description

RING

NCDE

No coded ringing on single party


lines.

RING

PLUS

Polarity of the line is plus (+).

RING

PO42

Post `42 coded ringing.

RING

PR42

Pre `42 coded ringing.

RING

Ring side.

RING

RING

Ringing parameters.

RING

SCAN

Four-party coded ringing with


revertive burst.

RING

SIMP

Superimposed ringing.

RING

SING

Single-party ringing in
superimposed offices.

RING

Tip side.

RMTD

RMAF

Remote access to features.

RMTD

RMUF

Remote activation of features.

RND

NRND

No repeat number dialed.

RND

RND

Last number redial.

RNS

NRNS

No repeat number saved.

RNS

RNS

Saved number redial.

RONI

NRON

Not a revertive ONI line.

RONI

RONI

Revertive calls on ONI lines.

ROP

NROP

No release on permanent.

ROP

ROP

Release on permanent.

ROTL

ROTL

Remote office test line group and


member number.

ROU

NROU

Routine not allowed.

308

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

ROU

ROU

Routine allowed.

RPDN

RPDN

Remember pooled DN; indicates


the DN is no longer controlled by
the switch because its number was
included in an LNP Number
Pooling block (output only).

RSOU

RSOU

Selective route source.

RSUG

RSUG

Superordinate RSU group (output


only).

SC3F

NS3F

No speed call 30 fixed.

SC3F

SC3F

Speed call 30 fixed.

SC3V

NS3V

No speed call 30 variable.

SC3V

SC3V

Speed call 30 variable.

SC8F

NS8F

No speed call 8 fixed.

SC8F

SC8F

Speed call 8 fixed.

SC8V

NS8V

No speed call 8 variable.

SC8V

SC8V

Speed call 8 variable.

SCAI

NSCA

No selective call acceptance


individual.

SCAI

SCAI

Selective call acceptance


individual.

SCNS

ASNS

Selective call acceptance no


solicitors feature assigned and
active (output only) Refer to Note
255.

SCNS

DSNS

Selective call acceptance no


solicitors feature assigned but not
active (output only) Refer to Note
255.

AG Communication Systems GTD-5 Cartridge Guide

309

Table 409: List of features and their options


Feature

Options

Description

SCRI

NSCR

No selective call rejection


individual.

SCRI

SCRI

Selective call rejection individual.

SECW

NSCW

No selective call waiting.

SECW

SECW

Selective call waiting.

SFF

ACSF

Access the special feature.

SFF

ACWF

Answer a call with the special


feature.

SFT

APC

Administrative processor complex.

SFT

BRIV

BRI verification operating


engineering test call.

SFT

CACC

Code calling access.

SFT

CLTD

Test call.

SFT

D16C

Dial 16-port conference.

SFT

D24C

Dial 24-port conference.

SFT

D8C

Dial 8-port conference.

SFT

FTU

Facility test unit.

SFT

JACK

JACK connection.

SFT

M16C

Meet me 16-port conference.

SFT

M24C

Meet me 24-port conference.

SFT

M8C

Meet me 8-port conference.

SFT

NSYC

Test call nonsynchronous.

SFT

PACC

Paging access.

SFT

PADS

Public address access.

SFT

PRTA

PORTA test call.

310

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

SFT

PTCC

Test call PTC connect.

SFT

PTCO

Test call PTC outpulse.

SFT

RSU

Remote switching unit.

SFT

RTLT

Test call ROTL.

SFT

SYNC

Test call synchronous (output only).

SFT

T100

Test call 100.

SFT

T102

Test call 102.

SFT

T103

Test call 103.

SFT

TBER

Loop-around bit error rate (BER)


test.

SFT

TDL

Test call DP/DTMF test set.

SFT

TL10

Test call 102 low.

SFT

TOPL

Test call open line.

SFT

TPBY

Test call permanent busy.

SFT

UNA

Universal night answer.

SFT

VRAC

Variable recorder announcer group


connect.

SFT

XJCK

Extended JACK.

SIMR

NSIM

No SimulRing.

SIMR

SIMR

SimulRing.

SMON

NSMO

No silent monitoring allowed (input


on SUBG only).

SMON

SMON

Silent monitoring allowed (input on


SUBG only).

SNDT

CNDT

Common battery survivable nondial


type.

AG Communication Systems GTD-5 Cartridge Guide

311

Table 409: List of features and their options


Feature

Options

Description

SNDT

ENDT

Emergency protection survivable


nondial type.

SNDT

FNDT

Fire fighters' conference survivable


nondial type.

SNDT

NNDT

Not a survivable nondial line.

SNDT

SNDT

Switched direct destination.

SRO

HAN

Repeat hangup.

SRO

HANT

Repeat hangup with tone.

SRO

NSRO

No supervision reporting.

SRO

SRBT

Supervision repeating by tone.

SSNK

SSNK

Screen sink.

SSO

NSSO

No special screening on origination.

SSO

SSO

Special screening on origination.

SSOU

SSOU

Screen source.

STAT

CUT

Cutover line status.

STDS

STDS

Survivable RSU translation data


set.

STOP

NSTO

No stop-bits (output only).

STOP

ST01

One stop-bit (output only).

STOP

ST02

Two stop-bits (output only).

STOP

ST15

One and one-half stop-bits (output


only).

STPR

NSTP

No station priority entry (input on


SUBG only).

STPR

STPR

Station priority entry (input on


SUBG only).

312

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

STWC

NSTW

No survivable RSU three-way


calling.

STWC

STWC

Survivable three-way calling.

SUPY

RLU

Remote line unit.

SUPY

RSU

Remote switching unit.

SUPY

SUPY

Supervisory point.

SUPY

TCU

Time switch and peripheral control


unit.

SWLN

SWLN

Switched line (output only).

SYCA

ASYC

Asynchronous transmission.

SYCA

BSYC

Both synchronous and


asynchronous transmission.

SYCA

NSYN

No transmission.

SYCA

SYCA

Synchronous transmission.

Sxxxx

Sxxxx

SCOS index.

TAS

ARNM

Automatic recall with name.

TAS

MSGD

Message delivery SPSN.

TAS

TCRT

Talking calling name with voice recorded name SPSN.

TAS

TCTT

Talking calling name with voice synthesized voice SPSN.

TAS

TCWT

Talking call waiting SPSN.

TAS

WISO

Who's calling SPSN.

TASI

TASI

Telecom application server


application index.

TCA

TCA

Terminal call appearance.

AG Communication Systems GTD-5 Cartridge Guide

313

Table 409: List of features and their options


Feature

Options

Description

TCCI

NTCI

No toll control code feature.

TCCI

TCCI

Toll control code feature.

TCNV

TCNO

Talking calling name with voice not


assigned.

TCNV

TCNR

Talking calling name with voice recorded name.

TCNV

TCNT

Talking calling name with voice synthesized voice.

TDA

TDA

Traffic data administration index


(output only).

TDLI

CN

Changed number intercept.

TDLI

IC

Intercept center.

TDLI

US

Unused directory number study


(output only) (refer to TRAFFIC
DATA ADMINISTRATION in
Part 9).

TDLI

VN

Vacant number.

TDO

TDO

Treatment for denied origination


index.

TDP

NTDP

Trigger detection point


provisioning not allowed.

TDP

TDP

Trigger detection point


provisioning allowed.

TDS

TDS

Translation data set.

TEMP

NTPD

Not temporarily disconnected.

TEMP

TPD

Temporarily disconnected line.

TERM

TWSZ

Termination with seizure only.

TERM

WORB

Termination with ringing without


ringback.

314

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

TERM

WRNG

Termination with ringing.

TIME

TIME

Metallic connection interval.

TMPN

BTMP

Featurephone subscriber database


business group template number.

TMPN

GTMP

Featurephone subscriber database


general template number.

TMPN

ITMP

Featurephone subscriber database


individual template image in
common memory.

TMPN

NTMP

No Featurephone subscriber
database template in memory.

TNOC

TNOC

Number of call appearances on


terminal.

TRIP

NTRP

No pretrip testing.

TRIP

TRIP

Pretrip testing.

TSE

NTSE

No terminating service evaluation


study.

TSE

TSE

Terminating service evaluation


study active.

TSOU

TSOU

Traffic source.

TSPI

DTSP

Generic TSPID.

TSPI

GTSP

Generic terminal service profile


identifier.

TSPI

NTSP

No terminal service profile


identifier.

TSPI

XTSP

Explicit TSPID.

TTA

NTTA

No terminating traffic study on


answer.

AG Communication Systems GTD-5 Cartridge Guide

315

Table 409: List of features and their options


Feature

Options

Description

TTA

TTA

Terminating ticket study on answer


active.

TTN

NTTN

No terminating traffic study on no


answer.

TTN

TTN

Terminating ticket study no answer


active.

TWC

NTWC

No three-way calling.

TWC

TATT

Restricted to attendant only (input


on SUBG only).

TWC

TCOM

Restrict completely.

TWC

TDGR

Restrict to last device in group.

TWC

TDIS

Transfer on disconnect or explicit


request.

TWC

TEXP

Transfer on explicit request only.

TWC

TIGR

Restricted to inside the group (input


on SUBG only).

TWC

TNON

No restrictions.

TWC

TOGR

Restricted to outside the group


(input on SUBG only).

TWC

TONT

Transfer only with no three-way


call allowed.

TWC

TWC

Three-way calling.

UACD

DAVI

Call forwarding all calls variable


usage assignable.

UACD

DSVI

Selective call forwarding variable


usage assignable.

UACD

NAFI

Call forwarding all calls fixed


subscription assignable.

316

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

UACD

NAVI

Call forwarding all calls variable


subscription assignable.

UACD

NSVI

Selective call forwarding variable


subscription assignable.

UACL

ACBC

Automatic call-back calling usage


assignable.

UACL

ARCC

Automatic recall usage assignable.

UACL

COTR

Customer originated trace usage


assignable.

UACL

NACB

Automatic call-back calling


subscription assignable.

UACL

NARC

Automatic recall subscription


assignable.

UACL

NCOT

Customer originated trace


subscription assignable.

UACL

NCWD

Call waiting deluxe conference


subscription assignable.

UACL

NUCR

Unidentified call rejection


subscription assignable.

UACL

UCRI

Unidentified call rejection usage


assignable.

UACN

CLND

Calling name delivery usage


assignable.

UACN

CNDB

Calling number delivery blocking


usage assignable.

UACN

CNDE

Calling number delivery usage


assignable.

UACN

NCAN

Calling number delivery


subscription assignable.

UACN

NCNA

Calling name delivery blocking


subscription assignable.

AG Communication Systems GTD-5 Cartridge Guide

317

Table 409: List of features and their options


Feature

Options

Description

UACN

NCND

Calling number delivery blocking


subscription assignable.

UACN

NNAD

Calling name delivery subscription


assignable.

UANC

CSMI

VMS call screening usage


assignable.

UANC

NCLJ

Call join subscription assignable.

UANC

NCSM

VMS call screening subscription


assignable.

UANC

NDND

Do not disturb subscription


assignable.

UANC

NTWC

Three-way calling subscription


assignable.

UANC

NWUP

Wake-up/reminder subscription
assignable.

UANC

TWC

Three-way calling usage


assignable.

UASL

DRCW

Distinctive ringing/call waiting


usage assignable.

UASL

NDRC

Distinctive ringing/call waiting


subscription assignable.

UASL

NSCA

Selective call acceptance


subscription assignable.

UASL

NSCR

Selective call rejection subscription


assignable.

UASL

NSCW

Selective call waiting subscription


assignable.

UASL

SCAI

Selective call acceptance usage


assignable.

UASL

SCRI

Selective call rejection usage


assignable.

318

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

UASL

SECW

Selective call waiting usage


assignable.

UCIA

UCIA

Unidentified call rejection


individual active (output only)
Refer to Note 132.

UCRI

NUCI

Unidentified call rejection


individual not assigned.

UCRI

UCRI

Unidentified call rejection


individual assigned.

URCD

DAFI

Call forwarding all calls fixed usage


recordable.

URCD

DAVI

Call forwarding all calls variable


usage recordable.

URCD

DSVI

Selective call forwarding variable


usage recordable.

URCD

NAFI

Call forwarding all calls fixed


subscription not recordable.

URCD

NAVI

Call forwarding all calls variable


subscription not recordable.

URCD

NSVI

Selective call forwarding variable


subscription not recordable.

URCL

ACBC

Automatic call-back calling usage


recordable.

URCL

ARCC

Automatic recall usage recordable.

URCL

COTR

Customer originated trace usage


recordable.

URCL

CWDC

Call waiting deluxe conference


usage recordable.

URCL

NACB

Automatic call-back calling


subscription not recordable.

AG Communication Systems GTD-5 Cartridge Guide

319

Table 409: List of features and their options


Feature

Options

Description

URCL

NARC

Automatic recall subscription not


recordable.

URCL

NCOT

Customer originated trace


subscription not recordable.

URCL

NCWD

Call waiting deluxe conference


subscription not recordable.

URCL

NUCR

Unidentified call rejection


subscription not recordable.

URCL

UCRI

Unidentified call rejection usage


recordable.

URCN

CLND

Calling name delivery usage


recordable.

URCN

CNAB

Calling name delivery blocking


usage recordable.

URCN

CNDB

Calling number delivery blocking


usage recordable.

URCN

CNDE

Calling number delivery usage


recordable.

URCN

NCAN

Calling number delivery


subscription not recordable.

URCN

NCNA

Calling name delivery blocking


subscription not recordable.

URCN

NCND

Calling number delivery blocking


subscription not recordable.

URCN

NNAD

Calling name delivery subscription


not recordable.

URNC

CLJN

Call join usage recordable.

URNC

CSMI

VMS call screening usage


recordable.

URNC

DND

Do not disturb usage recordable.

320

Oracle Corporation

List of features and their options

Table 409: List of features and their options


Feature

Options

Description

URNC

NCLJ

Call join subscription not


recordable.

URNC

NCSM

VMS call screening subscription


not recordable.

URNC

NDND

Do not disturb subscription not


recordable.

URNC

NTWC

Three-way calling subscription not


recordable.

URNC

NWUP

Wake-up/reminder subscription not


recordable.

URNC

TWC

Three-way calling usage


recordable.

URNC

WUPR

Wake-up/reminder usage
recordable.

URSL

DRCW

Distinctive ringing/call waiting


usage recordable.

URSL

NDRC

Distinctive ringing/call waiting


subscription not recordable.

URSL

NSCA

Selective call acceptance


subscription not recordable.

URSL

NSCR

Selective call rejection subscription


not recordable.

URSL

NSCW

Selective call waiting subscription


not recordable.

URSL

SCAI

Selective call acceptance usage


recordable.

URSL

SCRI

Selective call rejection usage


recordable.

URSL

SECW

Selective call waiting usage


recordable.

AG Communication Systems GTD-5 Cartridge Guide

321

Table 409: List of features and their options


Feature

Options

Description

USCI

USCI

TDA unused directory number


study index (output only).

VACC

NVAC

No vertical service code access.

VACC

VACC

Vertical service code access


allowed.

VACL

VACL

Validated code length.

VMST

NVMS

No voice message system index for


VMS DN.

VMST

VMST

Voice message system for VMS


DN.

VSLE

VSL1

Visual screening list editing type 1.

VSLE

VSL2

Visual screening list editing type 2.

WISC

NWIS

Who's calling not assigned.

WISC

WISC

Who's calling assigned.

WUPR

NWUP

No wake-up/reminder.

WUPR

WUPR

Wake-up/reminder assigned.

XCID

NXCD

No unassisted carrier identification


number.

XCID

XCID

Unassisted carrier identification for


coin phone pre subcriptions

XLNS

XLNS

Translation sink index.

ZONE

NZON

No zone digit required.

ZONE

ZONE

Zone digit required.

322

Oracle Corporation

List of features and their options

Add Line
List of optional parameters for ADD_LINE service
Table 410: List of optional parameters for ADD_LINE service
Parameter label
OPT[n].FEATURE

Parameter Value

Description

One of the following:ACA ACBC Feature Name.


ACBD ACC ACD ACO ACT ADN
ALN ALRT AMAO ARCC ARNE
ATWC AUTH B110 B12C B150
B19K B24C B300 B36C B48C
B48K B50B B56K B600 B64K
B72C B75B B96C BAL BCE
BCMK BGRP BLKP BLKT BLKU
CBGG CBGS CDOU CF16 CF24
CFC8 CGNN CID CLCK CNAM
CNDB CNDE CNVT CODA
COTR CRIX CSMI CTYP CUAC
CURF CWO CWT CXFR DAD
DAFI DAVI DBFI DBVI DCXR
DELA DMVI DND DNFI DNVI
DO DPV DRCW DRDN DREC
DRNG DSR2 DSVI DTM DTTI
DTYP EKTS ENGC FBSY FCMK
FLIO FLRO FWDR GND HLDX
HOLD ICID ICOM IDDD ISAD
JIPI LANG LDDA LIKE LNPP
LNRN LOAD LSM LTT MASS
MCSR MESS MLSG MNOC
MNWC MRS MSLG MWGC
MWIM NAD NDL ONHT

AG Communication Systems GTD-5 Cartridge Guide

323

Table 410: List of optional parameters for ADD_LINE service


Parameter label

Parameter Value

Description

OSE OTA OTN PAGE PARK


PERM PICK PIKD PKCS PLAN
PRIOX PTY PUBA RACC RBC
RBPC RBS REM2 REMI REV
RGND RING RMTD RND RNS
RONI ROP ROU SC3F SC3V
SC8F SC8V SCAI SCRI SECW
SIMR SNDT SRO SSO STDS
STWC SUPY S SYCA TCA TASI
TCCI TCNV TDO TDP TERM
TMPN TNOC TRIP TSE TSOU
TSPI TTA TTN TWC UACD
UACL UACN UANC UASL UCD
UCRI URCD URCL URCN URNC
URSL VACC VACL VMST VSLE
WISC WUPR XCID
OPT[n].OPTVALUE

324

Oracle Corporation

Please refer to List of features and Feature option.


their options for the possible
option values for the given feature.

You might also like