Professional Documents
Culture Documents
Integrated Design: Light and compact, GPS antenna and mainframe are integrated
design with key components all built-in. The whole mainframe is highly sealed,
waterproof, dustproof, and shock-proof.
2.
3.
4.
Technical Parameters:
GPS signal: 12 parallel channels + L1 C / A code
Positioning accuracy: 1m (1)
Data transmission: standard NMEA-0183 data output format
Data communication: RS-232 interface, baud rate 4800 ~ 57600bps
Voltage: DC 9 ~ 36V, 0.5A wide voltage input, it suits for the unstable voltage on board.
Mainframe power consumption: 1W
Volume: 184.5mm 87.5mm
Weight: 0.5Kg
Working temperature: -40 ~ 70
Storage temperature: -50 ~ 80
Mainframe
Data Cable
Power Supply
Front View
Bottom View
As shown above, there is only one data transfer interface at the bottom (big
six-pin Lemo socket).
Note:
1. After installed the data transfer interface of K2 satellite station, we have to do waterproof
maintance.
2. The installing position of K2 satellite station should be 2 meters higher than the fence on
the boat top, meanwhile far away from other high-frequency antennas, such as
high-frequency phone antenna, high frequency radar.
3-pin
connector
Data
power
transmission
Serial port
As shown above, the data cable is used for connecting mainframe, power supply and PC,
and supply power and transmit data to the mainframe. It is formed with a big six-pin
Lemo port, three-pin power connector, and a serial data transmission port.
Power Supply
Power Indicator light
Power key
3-pin
power
output
plughole
K2 Connection Diagram
the port and data format again until rows of GGA data come out with latitude and
longitude data.
Chapter 3
Features:
Split-type design: GPS antenna and mainframe is split design, and mainframe can be
placed in the cockpit, which makes checking become more convenient. GPS antenna and
beacon antenna adopt two-in-one design and without grounding wires.
High-precision: Positioning Accuracy: 0.5 m (CEP).
Light compartment transmission: adopting photoelectric isolation to prevent optical
interference from the computer, or RS-485 long-distance transmission.
Wide Voltage: 8-36V wide DC power supply, 12V battery power supply,
24V marine
Technical Parameters:
12-channels GPS receiver
Dual-channel automatic search beacon
Frequency range: 283.5KHz325KHz
Operating distance: marine 500km, land 200km
Standard NMEA-0183 data output format
Optoelectronic isolation RS-232/RS-485 interface, baud rate 4800 57600bps
DC power supply voltage: 8V36V
Power Consumption: 2W
Volume: 19cmX16cmX5cm
Weight: 0.5kg
Operating Temperature: -30 70
Ip64 defenses
Power button: Press this button for 1 second to turn on/off the mainframe.
4 LED lights:
Power led: When K3 Mainframe is on, the power led (red) is lighted. When there is
insufficient power, it blinks. Under the circumstance, please replace the power supply as
soon as possible.
Satellite led: After K3 mainframe is turned on, satellite receiving board begins to work,
and satellite led is not on. When satellite receiving board lock satellite, the led is
on(green).
Beacon led: After K3 mainframe is turned on, beacon begins to work. When beacon board
receives beacon signal, the led is on(blue).
Differential led: when satellite led and beacon led are on simultaneously, the main board
proceed to resolve. When the differential solution is resolved, the led is on(green).
Shown above: there are three ports in the back of K3 marine beacon machine, separately is
data transmission port(COM), power supply port, satellite or differential two-in-one
antenna port.
Data transmission port: it is mainly used for data transfer after
K3 marine beacon
receives the data, and is formed with a big five pin LEMO socket.
Power supply port: it is mainly used to supply power for K3, and is formed with a five pin
Remo (LEMO) socket. Supply voltage :8-36V, 12V DC recommended.
Satellite / Differential two-in-one antenna port: mainly used to transfer the received
satellite signal and differential signal to the mainboard, is formed with a screw port.
10
K3 marine beacon shell is made of aluminum alloy, it can effectively prevent the
mainframe from salination and oxidation in damp environment. Front and back panel is
protected by the industrial-grade silicone, the host can effectively sealed to prevent from
corrosion of internal components.
For the convenience of fixed, K3 marine beacon leaves four self-tapping screw holes on
the shell surrounding, easy to fix on the any position of the wood on board (horizontal
boards or vertical boards).
11
2. Confirm the PC-COM port whether it is occupied by other connection procedures. Such
as: RTK handheld Microsoft Active Sync, total station connection procedures.
KC-5
12
T-1500
13
Tool
Satellite
Coordinate
Satellite
informatio
differential
14
1)
Toolbar: Includes connecting GPS, configuring GPS, satellite tracking, base station setting
and mobile station setting, beacon, manual configuration, exit. (Details please see the next
section)
2)
Enter
3)
Finishing the above settings, we go to the NAV370/380 software when you see
DGPS signals from beacon receiver.
15
16
17
18
Communication Parameters:
Interface: photoelectric isolation RS-485 port;
Baud Rate: 4800-38400, default is 19200;
Data Format: standard NMEA 0183 output format
Physical Parameters:
Volume: 50cm19cm13cm;
Weight: 1.3kg;
Mainframe Power Supply/Data Port: 6 cores
Environment Parameters:
Work temperature: -32C74C
Storage temperature: -40C85C
Humidity: 100% without blocks;
Defenses: IP67.
K7 adopting the latest integrated design, integrated mainframe and antenna, built-in OEM
main-board, dual GPS antenna, electronic gyro and tilt sensors. Adopting single
19
mainframe dual antenna orientation, it can provide the location and orientation of the boat
accurately, matching the navigation software can achieve dredging and orientation
function. Communication is compatible with original products' accessory, like: BRS485
transferable box, TRS485 cable.
I, Hardware Connection
1. Mainframe Installation: install the integrated antenna mainframe on the proper position
of the boat, use the TRS485 cable to connect the 6 CORE of the mainframe, and then
connect with the BRS485 transferable box. Connection diagram as follows:
2. Notes: if the mainframe is installed in the open air, it should be fixed well.
Integrated
K7
mainframe
TRS485power/
data cable
R
PC with Hynav software
BRS485Transferable box
S
2
3
12V
storage
battary
2
adjustable
20
2. HyNav Marine Software use: baseline distance must be set 0.35m, others please
reference to the HyNav Marine Software introduction
21