You are on page 1of 597

BSC6910 GU

V100R016C00
Parameter List
Issue

06

Date

2014/12/30

HUAWEI TECHNOLOGIES CO., LTD.

Copyright Huawei Technologies Co., Ltd. 2014. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei T

Trademarks and Permissions


and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective h

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part
features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the c
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any

The information in this document is subject to change without notice. Every effort has been made in the preparation of this docum
contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express

Huawei Technologies Co., Ltd.


Address:

Huawei Industrial Base


Bantian, Longgang
Shenzhen 518129
People's Republic of China

Website:

http://www.huawei.com

Email:

support@huawei.com

ved.

y any means without prior written consent of Huawei Technologies Co., Ltd.

Co., Ltd.

in this document are the property of their respective holders.

t made between Huawei and the customer. All or part of the products, services and
r the usage scope. Unless otherwise specified in the contract, all statements,
hout warranties, guarantees or representations of any kind, either express or implied.

effort has been made in the preparation of this document to ensure accuracy of the
ment do not constitute a warranty of any kind, express or implied.

Purpose

This document describes the MO parameters of BSC6910. For the details about the parameters re
northbound interface interconnection, see the BSC6910 GSM V100R016 Parameter List and BSC
V100R016 Parameter List.

Intended Audience
This document is intended for:
Network planners
System engineers
Field engineers
Shift operators
Site maintainers
Network operators

Structure
The following table describes the attributes of each parameter.

Parameter Attribute
MO
Parameter ID
Parameter Name
NE
MML Command

Meaning

IsKey
Mandatory
Feature ID
Feature Name
Value Type

Issue 01 (06/12/2015)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd

GUI Value Range

Enumeration Number/Bit

Unit
Actual Value Range

Default Value

Recommended Value

Initial Value Source

Impact
Parameter Relationship

Access

Service Interrupted After Modification

Interruption Scope
Interruption Duration (min)
Caution

Issue 01 (06/12/2015)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd

Validation of Modification
Impact on Radio Network Performance
Introduced in Version
Attribute

Issue 01 (06/12/2015)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd

ument describes the MO parameters of BSC6910. For the details about the parameters related to
und interface interconnection, see the BSC6910 GSM V100R016 Parameter List and BSC6910 UMTS
16 Parameter List.

cument is intended for:


twork planners
stem engineers
ld engineers
ft operators
maintainers
work operators

ributes of each parameter.

Description
Managed object of NE.
A simple character string used for identifying a parameter.
Name of a parameter.
NEs on which the parameter is set.
Man Machine Language (MML) command related to the parameter.

Function of a parameter, protocol that defines the parameter, whether the parameter is out of use in later versions, an
whether the parameter is an advanced parameter.
If the parameter will be out of use, a related description beginning with "Disuse statement" will be provided in the para
meaning.
Advanced parameters are not configured through northbound interfaces. To modify these parameters, contact Huawe
Customer Service Center for technical support.
If parameters meet one of the following conditions, they are treated as advanced parameters:
1. Parameters are temporarily introduced in a new feature or a customized feature to achieve optimal network perform
These parameters will have fixed values and will be deleted after the beta test or test at the customized site.
2. Modifications to these parameters have a great impact on network KPIs or performance.
Normally, modifications of these parameters are not required for features. To achieve optimal network performance, m
parameters must be modified because modification of a single parameter has little effect on the network and even ma
cause accidents, for example, service interruption.
Whether the parameter is used to identify an MO instance.
Whether the parameter is mandatory for creating an MO instance.

ID of the feature that uses the parameter.


Note: Some common parameters and parameters introduced for internal functions do not have corresponding feature
Name of the feature that uses the parameter.

Type of a parameter value. For example, IP Address Type, Compound Type, Enumeration Type, Interval Type, Bit Fie
Type, Character String Type, Wildcard Mask Type, Subnet Mask Type, Password Type, Any Type, BCD Number Type

Issue 01 (06/12/2015)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd

Range of the parameter values displayed on the GUI.


The value of a string parameter cannot contain the following characters:
<>!?\/:;,=+%*"'|
Two or more percent signs (%) or spaces, +++ (start character of an MML message), or --- END (end character of a
message)
NULL or <NULL>, which indicates that an attribute of an MML message is null
Spaces at both ends
Note: The value of the Directory, File Name, and URL parameters can contain a backslash (\) or slash (/).
The
value of anumber
password
parameter to
cannot
contain
following
characters:
Enumeration
corresponding
the GUI
valuethe
of a
parameter
of the enumeration type, or bit position correspo
Symbols
;
,
=
"
'
to the GUI value of a parameter of the bit field type. N/A is filled if the parameter value is not enumeration type or bit f
Key
type.characters: two or more % symbols or spaces, +++ (start character of an MML message), or --- END (end char
an
MML
Note:
Formessage)
a parameter of the bit field type, bit position lists only the bits in use. Bits not in use are set to 0 and not des
in this document.
Unit of a parameter value displayed on the GUI.
Range of the actual values corresponding to the parameter values displayed on the GUI.

Initial value assigned by the system for a parameter. For a mandatory parameter, no default value is available. For a b
parameter, if the value of a sub-parameter is ON, the bit representing the sub-parameter is set to 1; if the value of a s
parameter is OFF, the bit representing the sub-parameter is set to 0. None indicates that no default value is available
Generally, it is displayed on the configuration window of an ADD command but not displayed on the configuration win
a MOD/RMV/DSP/LST/SET command.

Source
for the
initial
configurationfor
of a
parameter.
The initial value source can be:
Parameter
values
recommended
different
scenarios.
Radio planning (Internal planning): The parameter value comes from the radio network plan, facilitating resource
management on the NE.
Radio planning (Negotiation with the peer): The parameter value comes from the radio network plan. The NE nego
this value with the peer device to ensure successful interworking.
Transport planning (Internal planning): The parameter value comes from the transport network plan, facilitating res
management on the NE.
Transport planning (Negotiation with the peer): The parameter value comes from the transport network plan. The
negotiates this value with the peer device to ensure successful interworking.
Equipment planning: The parameter value comes from the equipment plan.
Engineering design: The parameter value comes from the algorithm or function design.
Default/recommended value: The parameter value uses the default or recommended value, where the recommend
value is preferential. The default/recommended value can be used in most scenarios and adjusted for a specific scen
Parameter
impact scope.
N/A:
The parameter
value is not required.

Relationship with other parameters. For example, to use this parameter, you need to set related switches and parame
Whether a parameter has one of the following properties:
Read/Write: The parameter can be added, deleted, or modified.
Read Only: The parameter can be added or deleted only.

Whether the parameter modification interrupts the ongoing services. One of the following comments is provided:
Yes: The modification interrupts the ongoing services.
No (And no impact on the UE in idle mode): The modification does not interrupt the ongoing services, and has no
on the network access of UEs in idle mode.
No (Impact on the UE in idle mode): The modification does not interrupt the ongoing services, but affects the netwo
access of UEs in idle mode.
N/A: This comment is used when a parameter cannot be modified.
Possible interruption scope.
Possible interruption duration (unit: minute).
Cautions to be taken during the modification.

Issue 01 (06/12/2015)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd

How this parameter takes effect and whether the equipment needs to be restarted after the modification. The parame
modification does not impact the equipment means that the parameter takes effect immediately after the modification
Impact of the parameter on radio network performance.
Product version in which the parameter is introduced.
Whether the parameter is a radio parameter, a transport parameter, or an equipment parameter.

Issue 01 (06/12/2015)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd

10

e parameter is out of use in later versions, and

Disuse statement" will be provided in the parameter

. To modify these parameters, contact Huawei

dvanced parameters:
ed feature to achieve optimal network performance.
ta test or test at the customized site.
PIs or performance.
s. To achieve optimal network performance, multiple
er has little effect on the network and even may

al functions do not have corresponding features.

Type, Enumeration Type, Interval Type, Bit Field


Password Type, Any Type, BCD Number Type.

Issue 01 (06/12/2015)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd

11

ML message), or ---

END (end character of an MML

is null

ontain a backslash (\) or slash (/).


cters:
the enumeration type, or bit position corresponding
rameter value is not enumeration type or bit field
of an MML message), or --- END (end character of

n use. Bits not in use are set to 0 and not described

ayed on the GUI.

arameter, no default value is available. For a bit field


e sub-parameter is set to 1; if the value of a subone indicates that no default value is available.
and but not displayed on the configuration window of

e can be:
the radio network plan, facilitating resource

mes from the radio network plan. The NE negotiates

rom the transport network plan, facilitating resource

comes from the transport network plan. The NE


king.
plan.
function design.
recommended value, where the recommended
ost scenarios and adjusted for a specific scenario.
you need to set related switches and parameters.

e of the following comments is provided:

ot interrupt the ongoing services, and has no impact

pt the ongoing services, but affects the network

Issue 01 (06/12/2015)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd

12

e restarted after the modification. The parameter


akes effect immediately after the modification.

n equipment parameter.

Issue 01 (06/12/2015)

Huawei Proprietary and Confidential


Copyright Huawei Technologies Co., Ltd

13

273357673.xlsx

MO

G2GNCELL

06/12/2015

Parameter ID

Parameter Name

BETTERCELLLAS Better Cell HO Valid


TTIME
Time

NE

BSC6910

MML Command

ADD G2GNCELL
MOD G2GNCELL

Meaning

Period during
which the
conditions for
handovers to
a better cell
are met.
According to
the P/N rule,
handovers to
a better cell
can be
triggered
when the
conditions for
handovers to
a better cell
are met for P
seconds
within N
seconds.
This
parameter
specifies P in
the P/N rule.

14597

273357673.xlsx

G2GNCELL

06/12/2015

BETTERCELLSTA Better Cell HO Watch


BSC6910
TTIME
Time

ADD G2GNCELL
MOD G2GNCELL

Period during
which
handovers to
a better cell
are
measured.
According to
the P/N rule,
handovers to
a better cell
can be
triggered
when the
conditions for
handovers to
a better cell
are met for P
seconds
within N
seconds.
This
parameter
specifies N in
the P/N rule.

15597

273357673.xlsx

G2GNCELL BQLASTTIME

G2GNCELL BQSTATTIME

06/12/2015

BQ HO Valid Time

BQ HO Watch Time

BSC6910

BSC6910

ADD G2GNCELL
MOD G2GNCELL

According to
the P/N rule,
if the
conditions for
emergency
BQ handover
are met in P
of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number P.

ADD G2GNCELL
MOD G2GNCELL

According to
the P/N rule,
if the
conditions for
emergency
BQ handover
are met in P
of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number N.

16597

273357673.xlsx

G2GNCELL

06/12/2015

Directed Retry
DRHOLEVRANG
Handover Level
E
Range

BSC6910

ADD G2GNCELL
MOD G2GNCELL

handover
algorithm II,
this
parameter is
used to
calculate the
hysteresis of
handovers
due to
directed retry
using the
following
formula:
Hysteresis of
handovers
due to
directed retry
= Value of
"INTERCELL
HYST" Value of this
parameter.
Handovers
due to
directed retry
to a
neighboring
cell can be
triggered
when the
following
condition is
met:
(Downlink
receive level
of the
neighboring

17597

273357673.xlsx

G2GNCELL

06/12/2015

EDOUTHOOFFSE Enhanced Outgoing


T
Cell Handover Offset

BSC6910

ADD G2GNCELL
MOD G2GNCELL

neighboring
cell can be
triggered
when either
of the
following
condition is
met:
Uplink
receive level
of the serving
cell after
power control
compensatio
n < Value of
"ULEDGETH
RES" + Value
of this
parameter 64
Downlink
receive level
of the serving
cell after
power control
compensatio
n < Value of
"DLEDGETH
RES" + Value
of this
parameter 64
In the case of
Huawei
handover
algorithm II,
handovers to

18597

273357673.xlsx

G2GNCELL HCSLASTTIME

06/12/2015

HCS HO Valid Time

BSC6910

ADD G2GNCELL
MOD G2GNCELL

According to
the P/N rule,
if the
conditions for
the handover
to a different
micro cell
due to fast
movement
are met in P
of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number P.

19597

273357673.xlsx

G2GNCELL HCSSTATTIME

06/12/2015

HCS HO Watch Time BSC6910

ADD G2GNCELL
MOD G2GNCELL

According to
the P/N rule,
if the
conditions for
the handover
to a different
micro cell
due to fast
movement
are met in P
of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number N.

20597

273357673.xlsx

G2GNCELL INTERCELLHYST

06/12/2015

Inter-cell HO
Hysteresis

BSC6910

ADD G2GNCELL
MOD G2GNCELL

Hysteresis
value during
the
handovers
between
cells, This
value is used
to suppress
ping-pong
handovers
between
cells. The
actual value
of this
parameter is
equal to the
GUI value
minus 64.

21597

273357673.xlsx

G2GNCELL NCELLPUNEN

06/12/2015

Neighboring Cell
Penalty Switch

BSC6910

ADD G2GNCELL
MOD G2GNCELL

Whether to
apply penalty
on a
neighboring
cell when the
PBGT
handover,
concentric
cell
handover, or
hierarchical
handover in
handover
algorithm I is
triggered, or
when the
better cell
handover in
handover
algorithm II is
triggered.
This prevents
a call from
experiencing
ping-pong
handovers.

22597

273357673.xlsx

G2GNCELL TALASTTIME

06/12/2015

TA HO Valid Time

BSC6910

ADD G2GNCELL
MOD G2GNCELL

The P/N
criterion must
be met for
triggering a
TA handover.
That is, the
TA handover
can be
triggered only
if P
measuremen
t reports
among N
measuremen
t reports
meet the
triggering
conditions.
This
parameter
corresponds
to P in the
P/N criterion.

23597

273357673.xlsx

G2GNCELL TASTATTIME

06/12/2015

TA HO Watch Time

BSC6910

ADD G2GNCELL
MOD G2GNCELL

The P/N
criterion must
be met for
triggering a
TA handover.
That is, the
TA handover
can be
triggered only
if P
measuremen
t reports
among N
measuremen
t reports
meet the
triggering
conditions.
This
parameter
corresponds
to N in the
P/N criterion.

24597

273357673.xlsx

G2GNCELL ULBQLASTTIME UL BQ HO Last Time

06/12/2015

BSC6910

ADD G2GNCELL
MOD G2GNCELL

Period during
which the
conditions for
handovers
without a
downlink
measuremen
t report.
According to
the P/N rule,
handovers
without a
downlink
measuremen
t report can
be triggered
when the
conditions for
handovers
without a
downlink
measuremen
t report are
met for P
seconds
within N
seconds.
This
parameter
specifies P in
the P/N rule.

25597

273357673.xlsx

G2GNCELL ULBQSTATTIME

06/12/2015

UL BQ HO Static Time BSC6910

ADD G2GNCELL
MOD G2GNCELL

Period during
which the
conditions for
handovers
without a
downlink
measuremen
t report.
According to
the P/N rule,
handovers
without a
downlink
measuremen
t report can
be triggered
when the
conditions for
handovers
without a
downlink
measuremen
t report are
met for P
seconds
within N
seconds.
This
parameter
specifies N in
the P/N rule.

26597

273357673.xlsx

GCELLCHM HALFRATEREPA
TCHH Integration
GAD
CKINGSWITCH

GCELLHOA ACCTHRESLAYE Inter-Layer Load HO


D
R
Access Threshold

06/12/2015

BSC6910

BSC6910

SET
GCELLCHMGAD

Whether to
convert
TCHHs to
TCHFs. If
this
parameter is
set to YES,
TCHHs are
converted to
TCHFs to
reduce
channel
segments
and ensure
that idle
TCHFs are
sufficient. If
this
parameter is
set to NO,
TCHHs are
not converted
to TCHFs.

SET GCELLHOAD

This
parameter is
a cell-level
parameter. If
the traffic
load in this
cell is lower
than the
threshold
specified by
this
parameter,
the cell can
absorb traffic
from
neighboring
cells.

27597

273357673.xlsx

GCELLHOA
BANTIME
D

06/12/2015

Forbidden time after


MAX Times

BSC6910

SET GCELLHOAD

intra-cell
handovers
reaches
"MAXCNTNU
M". If
"INTRACELL
SINUSEREN
" is set to
YES,
specified
MSs in a cell
are not
allowed to
initiate intracell
handovers
due to quality
problems
within the
duration
specified by
this
parameter. If
"INTRACELL
SINUSEREN
" is set to
NO, all MSs
in the cell are
not allowed
to initiate
intra-cell
handovers.
For MSs that
use handover
algorithm I,
intra-cell
handovers
due to quality

28597

273357673.xlsx

GCELLHOA
CONTINTV
D

06/12/2015

Interval for
BSC6910
Consecutive HO Jud.

SET GCELLHOAD

due to quality
problems
initiated by
an MS in a
cell at an
interval
specified by
this
parameter
are
consecutive.
If
"INTRACELL
SINUSEREN
" is set to
NO, the two
intra-cell
handovers
initiated by all
MSs in the
cell at an
interval
specified by
this
parameter
are
consecutive.
When
handover
algorithm I is
used, this
parameter
specifies the
interval
between
intra-cell
handover

29597

273357673.xlsx

GCELLHOA INTERFEREDLEV DLevOffset for


D
OFF
Interfere HO

06/12/2015

BSC6910

SET GCELLHOAD

The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
levels
(including the
correspondin
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR
calls.
The receive
quality
equals the
sum of the

30597

273357673.xlsx

GCELLHOA INTERFEREDLEV OL DL Level Offset for


BSC6910
D
OFFOL
Interference HO

06/12/2015

SET GCELLHOAD

used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the downlink
receive
quality
threshold is
obtained
from the sum
of the values
of the
downlink
receive level
and this
parameter
during the
interference
handover
decision. The
final
threshold is
obtained
from the sum
of the
downlink
receive
quality
threshold and
the value of
"INTERFERE
DLQUALOFF
OL". If
"INTERFER
OFFSWITCH
OL" is set to

31597

273357673.xlsx

GCELLHOA INTERFEREDLQ OL DL Quality Offset


D
UALOFFOL
for Interference HO

06/12/2015

BSC6910

SET GCELLHOAD

When
handover
algorithm II is
used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the downlink
receive
quality
threshold is
obtained
from the sum
of the values
of the
downlink
receive level
and
"INTERFERE
DLEVOFFOL
" during the
interference
handover
decision. The
final
threshold is
obtained
from the sum
of the
downlink
receive
quality
threshold and
the value of
this
parameter. If
"INTERFER

32597

273357673.xlsx

GCELLHOA INTERFEREDQU DQualOffset for


D
ALOFF
Interfere HO

06/12/2015

BSC6910

SET GCELLHOAD

quality at the
current uplink
level.
The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
levels
(including the
correspondin
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR
calls.

33597

273357673.xlsx

GCELLHOA INTERFEREULEV ULevOffset for


D
OFF
Interfere HO

06/12/2015

BSC6910

SET GCELLHOAD

level.
The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
levels
(including the
correspondin
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR
calls.
The receive
quality

34597

273357673.xlsx

GCELLHOA INTERFEREULEV OL UL Level Offset for


BSC6910
D
OFFOL
Interference HO

06/12/2015

SET GCELLHOAD

When
handover
algorithm II is
used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the uplink
receive
quality
threshold is
obtained
from the sum
of the values
of the uplink
level and this
parameter
during the
interference
handover
decision. The
final
threshold is
obtained
from the sum
of the uplink
receive
quality
threshold and
the value of
"INTERFERE
ULQUALOFF
OL". If
"INTERFER
OFFSWITCH
OL" is set to
NO(No), the

35597

273357673.xlsx

GCELLHOA INTERFEREULQ OL UL Quality Offset


D
UALOFFOL
for Interference HO

06/12/2015

BSC6910

SET GCELLHOAD

decision
conditions.
When
handover
algorithm II is
used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the uplink
receive
quality
threshold is
obtained
from the sum
of the values
of the uplink
receive level
and
"INTERFERE
ULEVOFFOL
" during the
interference
handover
decision. The
final
threshold is
obtained
from the sum
of the uplink
receive
quality
threshold and
the value of
this
parameter. If
"INTERFER

36597

273357673.xlsx

GCELLHOA INTERFEREUQU UQualOffset for


D
ALOFF
Interfere HO

06/12/2015

BSC6910

SET GCELLHOAD

threshold for
the receive
quality at the
current uplink
level.
The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
levels
(including the
correspondin
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR

37597

273357673.xlsx

GCELLHOA INTERFEROFFS OL Offset for


D
WITCHOL
Interference HO

06/12/2015

BSC6910

SET GCELLHOAD

parameter is
set to
YES(Yes),
the four
parameters
"INTERFERE
ULEVOFFOL
",
"INTERFERE
DLEVOFFOL
",
"INTERFERE
ULQUALOFF
OL", and
"INTERFERE
DLQUALOFF
OL" are used
for decisions
on handovers
due to
interference
in overlaid
subcells. If
this
parameter is
set to
NO(No), the
four original
parameters
"INTERFERE
ULEVOFF",
"INTERFERE
DLEVOFF",
"INTERFERE
UQUALOFF",
and
"INTERFERE
DQUALOFF"

38597

273357673.xlsx

GCELLHOA LOADHOHYSTAD Cell Edge Shrink


D
APEN
Based on Load

06/12/2015

BSC6910

SET GCELLHOAD

Whether to
adjust cell
coverage
based on cell
load. If this
parameter is
set to
YES(Yes),
the handover
margin is
adjusted
when the
load in the
serving cell is
high,
reducing the
coverage of
the serving
cell from the
aspects of
neighboring
cells at the
same layer.

39597

273357673.xlsx

GCELLHOA
LOADHOPERIOD Load HO Step Period BSC6910
D

06/12/2015

SET GCELLHOAD

"Load HO
Threshold",
all calls in the
serving cell
initiate
handover
requests at
the same
time, which
will suddenly
increase the
load of the
CPU. When
the traffic
volume is
high,
congestion
occurs in the
cell, leading
to call drops.
To resolve
this problem,
the BSC
uses the
hierarchical
load
handover
algorithm to
control the
number of
MSs included
in each level
of handovers.
This
parameter
indicates the
duration of

40597

273357673.xlsx

GCELLHOA
LOADOFFSET
D

06/12/2015

Load HO Bandwidth

BSC6910

SET GCELLHOAD

handovers
can be
performed
only when
the receive
level of the
current
serving cell is
in the range
"Edge HO DL
RX_LEV
Threshold" to
"Edge HO DL
RX_LEV
Threshold" +
"Load HO
Bandwidth".
In handover
algorithm II,
load
handovers
can be
performed
only when
the level
difference
between the
neighboring
cell and the
serving cell is
between
("Inter-cell
HO
Hysteresis" 64) - "Load
HO
Bandwidth"
and ("Inter-

41597

273357673.xlsx

GCELLHOA
MAXCNTNUM
D

06/12/2015

MAX Consecutive HO
BSC6910
Times

SET GCELLHOAD

or equal to
the value of
this
parameter,
intra-cell
handovers
are not
allowed for
the MS within
the duration
specified by
"BANTIME".
If
"INTRACELL
SINUSEREN
" is set to
NO, when
the interval
between two
intra-cell
handovers
initiated by all
MSs in the
cell is less
than
"CONTINTV"
, the two
intra-cell
handovers
are
consecutive.
If the number
of
consecutive
intra-cell
handovers is
greater than
or equal to

42597

273357673.xlsx

GCELLHOA TRIGTHRESLAYE Inter-Layer Load HO


D
R
Start Threshold

06/12/2015

BSC6910

SET GCELLHOAD

Triggering
threshold for
an inter-layer
load-based
handover.
When the
load in the
serving cell is
higher than
or equal to
the threshold
specified by
this
parameter,
an inter-layer
load-based
handover is
triggered. If
this
parameter is
set to 0, the
inter-layer
load-based
handover
algorithm
does not take
effect.

43597

273357673.xlsx

GCELLHOB AMRF2HHOQUAL AMR F-H HO Quality


ASIC
THFINE
Thres. Fine Tune

06/12/2015

BSC6910

SET
GCELLHOBASIC

during AMR
TCHF-toTCHH
handovers.
This
parameter
works with
"AMRFULLT
OHALFHOQ
UALTHRESH
". AMR
TCHF-toTCHH
handovers
can be
triggered
when both of
the following
conditions
are met:
Uplink
receive
signal quality
<= Value of
"AMRFULLT
OHALFHOQ
UALTHRESH
" + Value of
"AMRF2HHO
QUALTHFIN
E" x 0.1
Downlink
receive
signal quality
<= Value of
"AMRFULLT
OHALFHOQ

44597

273357673.xlsx

GCELLHOB AMRFULLTOHAL
AMR F-H Ho Allowed BSC6910
ASIC
FHOALLOW

06/12/2015

SET
GCELLHOBASIC

Whether to
enable the
algorithm for
load- and
quality-based
AMR TCHFto-TCHH
handovers.

45597

273357673.xlsx

AMRFULLTOHAL
GCELLHOB
AMR F-H Ho ATCB
FHOATCBADJST
ASIC
Adjust Step
EP

06/12/2015

BSC6910

SET
GCELLHOBASIC

With "F-H Ho
Period" and
the duration
for triggering
handover
from full rate
to half rate,
this
parameter
determines
the current
ATCB offset
by which to
choose the
MSs to
undergo
handover
from full rate
to half rate.
ATCB offset
= (duration
for triggering
handover
from full rate
to half
rate/"F-H Ho
Period" + 1) x
"AMR F-H Ho
ATCB Adjust
Step"

46597

273357673.xlsx

AMRFULLTOHAL
GCELLHOB
AMR F-H Ho ATCB
FHOATCBTHRES
ASIC
Threshold
H

06/12/2015

BSC6910

SET
GCELLHOBASIC

Threshold for
the AdapTive
Cell Border
(ATCB)
during AMR
TCHF-toTCHH
handovers.
AMR TCHFto-TCHH
handovers
can be
triggered
when the
following
condition is
met:
ATCB of an
AMR full-rate
call >= Value
of this
parameter ATCB offset
If the call is
initiated in an
overlaid
subcell, its
ATCB
excludes the
ATCB offset
in the
overlaid
subcell.

47597

273357673.xlsx

AMRFULLTOHAL
GCELLHOB
AMR F-H Ho Pathloss
FHOPATHADJST
BSC6910
ASIC
Adjust Step
EP

06/12/2015

SET
GCELLHOBASIC

With "F-H Ho
Period" and
the duration
for triggering
handover
from full rate
to half rate,
this
parameter
determines
the current
path loss
offset by
which to
choose the
MSs to
undergo
handover
from full rate
to half rate.
Path loss
offset =
(duration for
triggering
handover
from full rate
to half
rate/"F-H Ho
Period" + 1) x
"AMR F-H Ho
Pathloss
Adjust Step"

48597

273357673.xlsx

AMRFULLTOHAL
GCELLHOB
AMR F-H Ho Pathloss
FHOPATHTHRES
BSC6910
ASIC
Threshold
H

06/12/2015

SET
GCELLHOBASIC

Threshold for
the path loss
during AMR
TCHF-toTCHH
handovers.
AMR TCHFto-TCHH
handovers
can be
triggered
when the
following
condition is
met:
Path loss of
an AMR fullrate call <=
Value of this
parameter +
Path loss
offset
If the call is
initiated in an
overlaid
subcell, its
path loss
includes the
path loss
offset in the
overlaid
subcell.

49597

273357673.xlsx

AMRFULLTOHAL
GCELLHOB
AMR F-H Ho Qual.
FHOQUALTHRES
ASIC
Threshold
H

GCELLHOB AMRFULLTOHAL AMR F-H Traffic


ASIC
FHOTHRESH
Threshold

06/12/2015

BSC6910

BSC6910

SET
GCELLHOBASIC

Quality
threshold for
the AMR
handover
from full rate
to half rate. If
the uplink
and downlink
receive
quality levels
of an AMR
full rate call
are both
equal to or
less than
"AMRFULLT
OHALFHOQ
UALTHRESH
"+
"AMRF2HHO
QUALTHFIN
E"*0.1, the
AMR call is
handed over
from full rate
to half rate.

SET
GCELLHOBASIC

Threshold for
the load in a
cell during
AMR TCHFto-TCHH
handovers.
AMR TCHFto-TCHH
handover
decisions can
be made
when the cell
load is higher
than this
threshold.

50597

273357673.xlsx

GCELLHOB AMRH2FHOQUAL AMR H-F HO Quality


ASIC
FINE
Thres. Fine Tune

06/12/2015

BSC6910

SET
GCELLHOBASIC

during AMR
TCHH-toTCHF
handovers.
This
parameter
works with
"AMRHALFT
OFULLHOQ
UALTHRESH
". AMR
TCHH-toTCHF
handovers
can be
triggered
when one of
the following
conditions is
met:
Uplink
receive
signal quality
>= Value of
"AMRHALFT
OFULLHOQ
UALTHRESH
" + Value of
"AMRH2FHO
QUALFINEE"
x 0.1
Downlink
receive
signal quality
>= Value of
"AMRHALFT
OFULLHOQ

51597

273357673.xlsx

AMRHALFTOFUL
GCELLHOB
AMR H-F Ho ATCB
LHOATCBTHRES
ASIC
Threshold
H

06/12/2015

BSC6910

SET
GCELLHOBASIC

Threshold for
the AdapTive
Cell Border
(ATCB)
during AMR
TCHH-toTCHF
handovers.
AMR TCHHto-TCHF
handovers
can be
triggered
when the
ATCB of an
AMR halfrate call is
less than or
equal to this
threshold.
If the call is
initiated in an
overlaid
subcell, its
ATCB
excludes the
ATCB offset
in the
overlaid
subcell.

52597

273357673.xlsx

AMRHALFTOFUL
GCELLHOB
AMR H-F Ho Pathloss
LHOPATHTHRES
BSC6910
ASIC
Threshold
H

06/12/2015

SET
GCELLHOBASIC

Threshold for
the path loss
during AMR
TCHH-toTCHF
handovers.
AMR TCHHto-TCHF
handovers
can be
triggered
when the
following
condition is
met:
Path loss of
an AMR halfrate call >=
Value of this
parameter +
Path loss
offset
If the call is
initiated in an
overlaid
subcell, its
path loss
includes the
path loss
offset in the
overlaid
subcell.

53597

273357673.xlsx

GCELLHOB AMRHALFTOFUL Allow AMR H-F


ASIC
LHOQUALALLOW Quality-based HO

06/12/2015

BSC6910

SET
GCELLHOBASIC

Whether to
enable the
algorithm for
quality-based
AMR TCHHto-TCHF
handovers.
Even if the
cell load
does not
reach the
threshold,
TCHH-toTCHF
handover
decisions can
be made
when this
parameter is
set to
YES(Yes).

54597

273357673.xlsx

AMRHALFTOFUL
GCELLHOB
AMR H-F Ho Qual.
LHOQUALTHRES
ASIC
Threshold
H

06/12/2015

BSC6910

SET
GCELLHOBASIC

Quality
threshold for
the AMR
handover
from half rate
to full rate. If
the uplink or
downlink
receive
quality level
of an AMR
half rate call
is equal to or
greater than
"AMRHALFT
OFULLHOQ
UALTHRESH
"+
"AMRH2FHO
QUALFINE"*
0.1, the AMR
call is
handed over
from half rate
to full rate.

55597

273357673.xlsx

GCELLHOB AMRHALFTOFUL AMR H-F Traffic


ASIC
LHOTHRESH
Threshold

GCELLHOB BETTERCELLHO Better Cell Handover


ASIC
EN
Enable

06/12/2015

BSC6910

BSC6910

SET
GCELLHOBASIC

When
"AMRFULLT
OHALFHOAL
LOW" is set
to YES and
the load of a
cell is lower
than this
threshold, a
decision on
AMR H-F
handovers is
made. When
"IBCAIIHRPri
Sw" is set to
YES and the
load of a cell
is lower than
this
threshold, do
not enable
the IBCA II
half-rate
TCHH
allocation
optimization
function.

SET
GCELLHOBASIC

Whether to
enable the
algorithm for
the handover
to a better
cell

56597

273357673.xlsx

GCELLHOB EDGEHOHYSTE Low Hysteresis


ASIC
N
Allowed for Edge HO

06/12/2015

BSC6910

SET
GCELLHOBASIC

HO
Hysteresis".F
or an MS
with high
receive level,
the receive
level of the
neighboring
cell must be
greater than
or equal to
the receive
level of the
serving cell
plus
"INTERCELL
HYST".In the
overlaid
subcell of a
concentric
cell, the BSC
regards an
MS as a lowlevel MS
after
detecting that
the downlink
receive level
of the MS is
less than the
value of
"DLEDGETH
RES". In
other
scenarios,
the BSC
regards an
MS as a low-

57597

273357673.xlsx

GCELLHOB
EDGELAST
ASIC

GCELLHOB
EDGESTAT
ASIC

06/12/2015

Handover Algorithm II
BSC6910
Edge HO Valid Time

Handover Algorithm II
BSC6910
Edge HO Watch Time

SET
GCELLHOBASIC

According to
the P/N rule,
if the
conditions for
edge
handover are
met in P of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number P.

SET
GCELLHOBASIC

According to
the P/N rule,
if the
conditions for
edge
handover are
met in P of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number N.

58597

273357673.xlsx

GCELLHOB F2HHOLOADSTF F-H HO Load Band


ASIC
SWITCH
Optimization Allowed

GCELLHOB FULLTOHALFHO F-H ATCB Offset


ASIC
ATCBOFFSET
Overlay

06/12/2015

BSC6910

BSC6910

SET
GCELLHOBASIC

handover
based on the
load.
If the cell
load is less
than
"AMRFULLT
OHALFHOT
HRESH"-"Ful
lToHalfHoLoa
dStf" or if the
cell load is
less than
"NOAMRFUL
LTOHALFTH
RESH"-"FullT
oHalfHoLoad
Stf", an AMR
or non-AMR
TCHF-TCHH
handover is
stopped.
If the cell
load is more
than
"AMRHALFT
OFULLHOTH
RESH"+"Full
ToHalfHoLoa
dStf" or if the
cell load is
less than
"NOAMRHAL
FTOFULLTH
RESH"+"Full
ToHalfHoLoa
dStf", an
AMR or non-

SET
GCELLHOBASIC

ATCB
threshold for
the overlaid
subcell,
which is
equal to the
sum of
TCHF-TCHH
handover
ATCB
threshold and
the value of
this
parameter.

59597

273357673.xlsx

GCELLHOB FULLTOHALFHO
F-H Ho Duration
ASIC
DURATION

06/12/2015

BSC6910

SET
GCELLHOBASIC

Duration of
the handover
from full rate
to half rate. If
the cell load
is greater
than the
preset
threshold, the
calls that
meet the
conditions for
the handover
from full rate
to half rate
are handed
over from full
rate to half
rate in this
duration.

60597

273357673.xlsx

GCELLHOB FULLTOHALFHOL
F-H Ho Last Time
ASIC
ASTTIME

GCELLHOB FULLTOHALFHO F-H Pathloss Offset


ASIC
PATHOFFSET
Overlay

06/12/2015

BSC6910

BSC6910

SET
GCELLHOBASIC

According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHF-TCHH
handovers,
such
handovers
are triggered.
This
parameter
specifies the
number P.

SET
GCELLHOBASIC

Threshold of
path loss for
TCHF-TCHH
handovers in
overlaid
subcells,
which is
equal to the
difference
between path
loss for
TCHF-TCHH
handovers
and this
parameter.

61597

273357673.xlsx

GCELLHOB FULLTOHALFHO
F-H Ho Period
ASIC
PERIOD

06/12/2015

BSC6910

SET
GCELLHOBASIC

AMR TCHFto-TCHH
handovers.
When the
cell load is
higher than
the threshold
specified by
"AMRFULLT
OHALFHOT
HRESH" or
"NOAMRFUL
LTOHALFTH
RESH", the
calls that
meet the
conditions for
AMR TCHFto-TCHH
handovers
can be
handed over
from a TCHF
to a TCHH
within the
period
specified by
"FULLTOHAL
FHODURATI
ON". This
parameter is
also used to
specify the
bandwidth for
handovers at
each
hierarchy

62597

273357673.xlsx

GCELLHOB FULLTOHALFHO
F-H Ho Stat. Time
ASIC
STATTIME

06/12/2015

BSC6910

SET
GCELLHOBASIC

According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHF-TCHH
handovers,
such
handovers
are triggered.
This
parameter
specifies the
number N.

63597

273357673.xlsx

GCELLHOB FullToHalfHoLoad TCHF-TCHH HO Load


BSC6910
ASIC
Stf
Hysteresis

06/12/2015

SET
GCELLHOBASIC

RESH",
"AMRHALFT
OFULLHOTH
RESH" and
"NOAMRHAL
FTOFULLTH
RESH"to
prevent pingpong
handovers.
If the cell
load is less
than
"AMRFULLT
OHALFHOT
HRESH"-"Ful
lToHalfHoLoa
dStf" or if the
cell load is
less than
"NOAMRFUL
LTOHALFTH
RESH"-"FullT
oHalfHoLoad
Stf", an AMR
or non-AMR
TCHF-TCHH
handover is
stopped.
If the cell
load is more
than
"AMRHALFT
OFULLHOTH
RESH"+"Full
ToHalfHoLoa
dStf" or if the

64597

273357673.xlsx

GCELLHOB HALFTOFULLATC H-F ATCB Offset


ASIC
BOFFSET
Overlay

06/12/2015

BSC6910

SET
GCELLHOBASIC

Difference
between the
ATCB
threshold in
an overlaid
subcell and
that in an
underlaid
subcell
during AMR
TCHH-toTCHF
handovers.

65597

273357673.xlsx

GCELLHOB HALFTOFULLHO
H-F Ho Duration
ASIC
DURATION

06/12/2015

BSC6910

SET
GCELLHOBASIC

Period of
AMR TCHHto-TCHF
handovers.
When the
cell load is
lower than
the threshold
specified by
"AMRFULLT
OHALFHOT
HRESH" or
"NOAMRFUL
LTOHALFTH
RESH", the
calls that
meet the
conditions for
AMR TCHHto-TCHF
handovers
can be
handed over
from a TCHH
to a TCHF
within the
period
specified by
this
parameter.

66597

273357673.xlsx

GCELLHOB HALFTOFULLHO
H-F Ho Last Time
ASIC
LASTTIME

06/12/2015

BSC6910

SET
GCELLHOBASIC

According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHH-TCHF
handovers,
such
handovers
are triggered.
This
parameter
specifies the
number P.

67597

273357673.xlsx

GCELLHOB HALFTOFULLHO H-F Pathloss Offset


ASIC
PATHOFFSET
Overlay

06/12/2015

BSC6910

SET
GCELLHOBASIC

Path loss
difference
between the
overlaid and
underlaid
subcells.

68597

273357673.xlsx

GCELLHOB HALFTOFULLHO
H-F Ho Stat. Time
ASIC
STATTIME

06/12/2015

BSC6910

SET
GCELLHOBASIC

According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHH-TCHF
handovers,
such
handovers
are triggered.
This
parameter
specifies the
number N.

69597

273357673.xlsx

GCELLHOB
HOPRIOMODEN HO Priority Adjustment BSC6910
ASIC

06/12/2015

SET
GCELLHOBASIC

handover
priority in
handover
algorithm II. If
this
parameter is
set to
YES(Yes), an
edge
handover
using
handover
algorithm II is
not an
emergency
handover,
cell level,
priority, and
load are
considered in
an
emergency
handover,
and a better
cell handover
takes
precedence
over an
emergency
handover. If
this
parameter is
set to
NO(No), the
handover
priority in
handover

70597

273357673.xlsx

GCELLHOB INTERFERELAST Interfere HO Valid


ASIC
TIME
Time

06/12/2015

BSC6910

SET
GCELLHOBASIC

The
triggering of
interference
handovers
must meet
the P/N
criteria, that
is, when P
out of N
measuremen
t reports
meet the
condition for
interference
handovers, a
concentric
circle
handover is
triggered.
This
parameter
corresponds
to the P in
the P/N
criteria.

71597

273357673.xlsx

GCELLHOB INTERFERESTAT Interfere HO Static


ASIC
TIME
Time

06/12/2015

BSC6910

SET
GCELLHOBASIC

The
triggering of
interference
handovers
must meet
the P/N
criteria, that
is, when P
out of N
measuremen
t reports
meet the
condition for
interference
handovers, a
concentric
circle
handover is
triggered.
This
parameter
corresponds
to the N in
the P/N
criteria.

72597

273357673.xlsx

GCELLHOB
INTERFHOEN
ASIC

06/12/2015

Interference HO
Allowed

BSC6910

SET
GCELLHOBASIC

Whether to
allow the
interference
handover
algorithm.
Interference
handovers
are triggered
when the
receive
quality level
is greater
than the
expected
receive
quality
threshold
based on the
current
receive level.
That is,
handovers
are required
when the
MSs are
subject to all
kinds of radio
interferences.

73597

273357673.xlsx

GCELLHOB INTRACELLFHOP Intra-cell F/H Load


ASIC
TSWITCH
Control Optimization

06/12/2015

BSC6910

SET
GCELLHOBASIC

Whether to
optimize load
control
method for
TCHF-TCHH
handovers. If
this
parameter is
set to YES,
the number
of MSs
involved in a
TCHF-TCHH
handover is
accurately
determined
based on the
load range. If
this
parameter is
set to NO,
the number
of MSs
involved in a
TCHF-TCHH
handover is
accurately
determined
based on the
signal level
band range.

74597

273357673.xlsx

Non-AMR F-H HO
GCELLHOB NOAMRF2HHOQ
Quality Thres. Fine
ASIC
UALTHFINE
Tune

06/12/2015

BSC6910

SET
GCELLHOBASIC

during nonAMR TCHFto-TCHH


handovers.
This
parameter is
used with
"NOAMRFUL
LTOHALFHO
QUALTHRES
H". Non-AMR
TCHF-toTCHH
handovers
can be
triggered
when both of
the following
conditions
are met:
Uplink
receive
signal quality
<= Value of
"NOAMRFUL
LTOHALFHO
QUALTHRES
H" + Value of
"NOAMRF2H
HOQUALTH
FINE" x 0.1
Downlink
receive
signal quality
<= Value of
"NOAMRFUL
LTOHALFHO

75597

273357673.xlsx

GCELLHOB NOAMRFULLTOH Non-AMR F-H Ho


ASIC
ALFHOALLOW
Allowed

06/12/2015

BSC6910

SET
GCELLHOBASIC

Whether to
allow nonAMR voice FH handover.

76597

273357673.xlsx

NOAMRFULLTOH
GCELLHOB
Non-AMR F-H Ho
ALFHOATCBADJ
ASIC
ATCB Adjust Step
STEP

06/12/2015

BSC6910

SET
GCELLHOBASIC

Decides the
offset of the
current ATCB
together with
other two
parameters:
"F-H Ho
Period" and
period of
triggering a
F-H
handover,
thus
selecting
target users
for F-H
handovers.
ATCB offset
= (Period of
triggering a
F-H
handover /
"F-H Ho
Period" + 1) *
"Non-AMR FH Ho ATCB
Adjust Step".

77597

273357673.xlsx

NOAMRFULLTOH
GCELLHOB
Non-AMR F-H Ho
ALFHOATCBTHR
ASIC
ATCB Threshold
ESH

06/12/2015

BSC6910

SET
GCELLHOBASIC

Threshold for
the AdapTive
Cell Border
(ATCB)
during nonAMR TCHFto-TCHH
handovers.
Non-AMR
TCHF-toTCHH
handovers
can be
triggered
when the
following
condition is
met:
ATCB of a
non-AMR
full-rate call +
ATCB offset
>= Value of
this
parameter

78597

273357673.xlsx

NOAMRFULLTOH
GCELLHOB
Non-AMR F-H Ho
ALFHOPATHADJ
ASIC
Pathloss Adjust Step
STEP

06/12/2015

BSC6910

SET
GCELLHOBASIC

Decides the
current path
cost offset
together with
other two
parameters:
"F-H Ho
Period" and
period of
triggering a
F-H
handover,
thus
selecting
target users
for F-H
handovers.
Path cost
offset =
(Period of
triggering a
F-H
handover /
"F-H Ho
Period" + 1) *
"Non-AMR FH Ho
Pathloss
Adjust Step".

79597

273357673.xlsx

NOAMRFULLTOH
GCELLHOB
Non-AMR F-H Ho
ALFHOPATHTHR
ASIC
Pathloss Threshold
ESH

06/12/2015

BSC6910

SET
GCELLHOBASIC

Threshold for
the path loss
during nonAMR TCHFto-TCHH
handovers.
Non-AMR
TCHF-toTCHH
handovers
can be
triggered
when the
following
condition is
met:
Path loss of
an AMR fullrate call <=
Value of this
parameter +
Path loss
offset.

80597

273357673.xlsx

NOAMRFULLTOH
GCELLHOB
Non-AMR F-H Ho
ALFHOQUALTHR
ASIC
Qual. Threshold
ESH

06/12/2015

BSC6910

SET
GCELLHOBASIC

Quality
threshold for
non-AMR FH handovers.
When the
uplink
receive
quality and
downlink
receive
quality of a
user are both
equal to or
less than
"NOAMRFUL
LTOHALFHO
QUALTHRES
H" +
"NOAMRF2H
HOQUALTH
FINE"*0.1, a
F-H
handover can
be triggered
for the user.

81597

273357673.xlsx

GCELLHOB NOAMRFULLTOH Non-AMR F-H Traffic


ASIC
ALFTHRESH
Threshold

06/12/2015

BSC6910

SET
GCELLHOBASIC

Threshold for
the load in a
cell during
non-AMR
TCHF-toTCHH
handovers.
Non-AMR
TCHF-toTCHH
handover
decisions can
be made
when the cell
load is higher
than this
threshold.

82597

273357673.xlsx

Non-AMR H-F HO
GCELLHOB NOAMRH2FHOQ
Quality Thres. Fine
ASIC
UALFINE
Tune

NOAMRHALFTOF
GCELLHOB
Non-AMR H-F Ho
ULLHOATCBTHR
ASIC
ATCB Threshold
ESH

06/12/2015

BSC6910

BSC6910

SET
GCELLHOBASIC

during nonAMR TCHHto-TCHF


handovers.
This
parameter is
used with
"NOAMRHAL
FTOFULLHO
QUALTHRES
H". Non-AMR
TCHH-toTCHF
handovers
can be
triggered
when either
of the
following
conditions is
met:
Uplink
receive
signal quality
>= Value of
"NOAMRHAL
FTOFULLHO
QUALTHRES
H" + Value of
"NOAMRH2F
HOQUALFIN
E" x 0.1
Downlink
receive
signal quality
>= Value of
"NOAMRHAL
FTOFULLHO

SET
GCELLHOBASIC

When the
ATCB value
of non-AMR
half rate
voice is equal
to or less
than this
threshold, the
condition for
non-AMR HF handovers
is met.

83597

273357673.xlsx

NOAMRHALFTOF
GCELLHOB
Non-AMR H-F Ho
ULLHOPATHTHR
ASIC
Pathloss Threshold
ESH

NOAMRHALFTOF
GCELLHOB
Allow Non-AMR H-F
ULLHOQUALALL
ASIC
Quality-based HO
OW

06/12/2015

BSC6910

BSC6910

SET
GCELLHOBASIC

When the
path loss
value of nonAMR half
rate voice is
no smaller
than this
threshold, the
condition for
non-AMR HF handovers
is met.

SET
GCELLHOBASIC

Whether to
trigger nonAMR H-F
handovers
according to
the uplink
and downlink
receive
quality.

84597

273357673.xlsx

NOAMRHALFTOF
GCELLHOB
Non-AMR H-F Ho
ULLHOQUALTHR
ASIC
Qual. Threshold
ESH

06/12/2015

BSC6910

SET
GCELLHOBASIC

AMR TCHHto-TCHF
handovers.
This
parameter is
used with
"NOAMRHAL
FTOFULLHO
QUALTHRES
H". Non-AMR
TCHH-toTCHF
handovers
can be
triggered
when either
of the
following
conditions is
met:
Uplink
receive
signal quality
>= Value of
"NOAMRHAL
FTOFULLHO
QUALTHRES
H" + Value of
"NOAMRH2F
HOQUALFIN
E" x 0.1
Downlink
receive
signal quality
>= Value of
"NOAMRHAL
FTOFULLHO
QUALTHRES

85597

273357673.xlsx

GCELLHOB NOAMRHALFTOF Non-AMR H-F Traffic


ASIC
ULLTHRESH
Threshold

GCELLHOB
PATHLOSSHOEN Pathloss Ho. Enable
ASIC

06/12/2015

BSC6910

BSC6910

SET
GCELLHOBASIC

When
"NOAMRFUL
LTOHALFHO
ALLOW" is
set to YES
and the load
of a cell is
lower than
this
threshold, a
decision on
non-AMR HF handovers
is made.
When
"IBCAIIHRPri
Sw" is set to
ON and the
load of a cell
is lower than
this
threshold, do
not enable
the IBCA II
half-rate
TCHH
allocation
optimization
function.

SET
GCELLHOBASIC

Whether to
perform path
loss-based
sorting in a
better cell
handover
algorithm.

86597

273357673.xlsx

GCELLHOE
ULQUALIMIT
MG

GCELLHOFI
INITUPFILEN
TPEN

06/12/2015

UL Qual. Threshold

Initial Increment
Filtering Allowed

BSC6910

BSC6910

An
emergency
handover
due to bad
quality is
triggered
SET GCELLHOEMG when the
uplink
receive
quality is not
smaller than
"UL Qual.
Threshold".

SET
GCELLHOFITPEN

filtering
algorithm is
enabled. If
this
parameter is
set to
YES(Yes),
the initial
incremental
filtering
algorithm is
enabled
when a call
accesses a
new channel,
and the timer
specified by
"TCHHOMINI
NTV" or
"SDHOMININ
TV" is
enabled
simultaneous
ly with
incremental
filtering. If
this
parameter is
set to
NO(No), the
initial
incremental
filtering
algorithm is
disabled.
This
parameter is

87597

273357673.xlsx

GCELLHOFI INTERFEREHOP Penalty Time on


TPEN
ENTIME
Interfere HO

BSC6910

GCELLHOFI LOADHOPENTIM Penalty Time on Load


BSC6910
TPEN
E
HO

06/12/2015

SET
GCELLHOFITPEN

Period in
which
interference
handovers
are not
allowed after
a successful
or failed
interference
handover is
performed.

SET
GCELLHOFITPEN

After a load
handover
succeeds,
the BSC
punishes the
former
serving cell
during
"Penalty
Time on
Load HO" by
subtracting
"Penalty
Value on
Load HO"
from the
receive level
of the former
serving cell,
thus avoiding
ping-pong
handovers.

88597

273357673.xlsx

GCELLHOFI LOADHOPENVAL Penalty Value on Load


BSC6910
TPEN
UE
HO

06/12/2015

SET
GCELLHOFITPEN

After a load
handover
succeeds,
the BSC
punishes the
former
serving cell
during
"Penalty
Time on
Load HO" by
subtracting
"Penalty
Value on
Load HO"
from the
receive level
of the former
serving cell,
thus avoiding
ping-pong
handovers.

89597

273357673.xlsx

GCELLHOFI LoadHoPunishInh Load HO Penalty


TPEN
eritSwitch
Optimization

06/12/2015

BSC6910

SET
GCELLHOFITPEN

Whether to
enable
penalty
inheritance
for loadbased
handovers.
With the
handover
penalty
inheritance
function, the
penalty list
will be
transferred to
the target cell
along with a
call
handover.

90597

273357673.xlsx

GCELLHOFI
NCell Filter Length for
NSIGSTRFLTLEN
BSC6910
TPEN
SDCCH Level

06/12/2015

SET
GCELLHOFITPEN

For the
purpose of
accurately
reflecting the
radio
environment
of a network,
filtering is
performed on
the
measured
values in
several
consecutive
measuremen
t reports.
This
parameter
indicates the
number of
measuremen
t reports
received on
signaling
channels
used for the
filtering of
neighboring
cell signal
strength.

91597

273357673.xlsx

GCELLHOFI TASIGSTRFLTLE TA Filter Length for


TPEN
N
SDCCH Level

06/12/2015

BSC6910

SET
GCELLHOFITPEN

When the
network
receives
measuremen
t reports, the
measuremen
t values in
several
straight
measuremen
t reports are
filtered to
reflect the
radio
operating
environment
for the sake
of accuracy.
This
parameter
specifies the
number of
measuremen
t reports
sampled for
filtering the
TA on the
signaling
channel.

92597

273357673.xlsx

GCELLHOIU ENUTOOLOADINI IniLev for EnUtoO


O
LEV
Load HO

06/12/2015

BSC6910

SET GCELLHOIUO

Initial signal
level used to
compute the
handover
zone for an
MS during
the
hierarchical
load-based
handover
from the
underlaid
subcell to the
overlaid
subcell of the
enhanced
concentric
cell.

93597

273357673.xlsx

GCELLHOIU IUOOlPowerComp Overlaid Level Power


BSC6910
O
Policy
Compensate Policy

06/12/2015

SET GCELLHOIUO

concentric
cell. When
this
parameter is
set to
TCHMAXPO
WER, the
BSC
compensates
for the level
of the
overlaid
subcell using
the maximum
TCH transmit
power. When
this
parameter is
set to
ULBCCHPO
WER, the
BSC
compensates
for the level
of the
overlaid
subcell using
the BCCH
level of the
underlaid
subcell for an
enhanced
concentric
cell or using
the sum of
maximum
TCH transmit
power and

94597

273357673.xlsx

GCELLHOIU UOLOADOPTSWI OL/UL Load Control


O
TCH
Optimization

06/12/2015

BSC6910

SET GCELLHOIUO

underlaid
subcell. If this
parameter is
set to YES,
the number
of MSs to be
handed over
is accurately
determined
based on the
load range
when loadbased
handovers
are
performed
between
overlaid and
underlaid
subcells in an
enhanced
concentric
cell. If this
parameter is
set to NO,
the number
of MSs is
determined
based on the
signal level
band range
when loadbased
handovers
are
performed
between
overlaid and

95597

273357673.xlsx

IsKey

NO

06/12/2015

Mandatory

NO

Feature ID

GBFD510501

Feature Name

HUAWEI II
Handover

Value Type

Interval Type

GUI Value Range

1~32

96597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~32

97597

273357673.xlsx

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~16

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~16

06/12/2015

98597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

0~128

99597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

0~127

100597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~16

101597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~16

102597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD118106
GBFD510501

HUAWEI I
Handover
Dynamic Power
Sharing
HUAWEI II
Handover

Interval Type

0~127

103597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

104597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~16

105597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~16

106597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~8

107597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~8

108597

273357673.xlsx

NO

NO

GBFD113402
GBFD115504

NO

NO

GBFD510501

06/12/2015

Dynamic
Adjustment
Between FR and
HR
Enumeration Type NO(No), YES(Yes)
AMR FR/HR
Dynamic
Adjustment

HUAWEI II
Handover

Interval Type

0~100

109597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

1~200

110597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

1~200

111597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

-30~30

112597

273357673.xlsx

NO

06/12/2015

NO

GBFD113201
GBFD510501

Concentric Cell
HUAWEI II
Handover

Interval Type

-30~30

113597

273357673.xlsx

NO

06/12/2015

NO

GBFD113201
GBFD510501

Concentric Cell
HUAWEI II
Handover

Interval Type

-30~30

114597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

-30~30

115597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

-30~30

116597

273357673.xlsx

NO

06/12/2015

NO

GBFD113201
GBFD510501

Concentric Cell
HUAWEI II
Handover

Interval Type

-30~30

117597

273357673.xlsx

NO

06/12/2015

NO

GBFD113201
GBFD510501

Concentric Cell
HUAWEI II
Handover

Interval Type

-30~30

118597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

-30~30

119597

273357673.xlsx

NO

06/12/2015

NO

GBFD113201
GBFD510501

Concentric Cell
HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

120597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

121597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

1~255

122597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

0~63

123597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

1~20

124597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~100

125597

273357673.xlsx

NO

06/12/2015

NO

GBFD113402
GBFD510501

Dynamic
Adjustment
Between FR and
Interval Type
HR
HUAWEI II
Handover

0~9

126597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601

HUAWEI I
Handover

Enumeration Type NO(No), YES(Yes)

127597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~255

128597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

-63~255

129597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~255

130597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~255

131597

273357673.xlsx

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~7

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~100

06/12/2015

132597

273357673.xlsx

NO

06/12/2015

NO

GBFD113402
GBFD510501

Dynamic
Adjustment
Between FR and
Interval Type
HR
HUAWEI II
Handover

0~9

133597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

-63~255

134597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~255

135597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601

HUAWEI I
Handover

Enumeration Type NO(No), YES(Yes)

136597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601

HUAWEI I
Handover

Interval Type

0~7

137597

273357673.xlsx

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

NO

NO

GBFD510501

HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

06/12/2015

0~100

138597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

139597

273357673.xlsx

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~32

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~32

06/12/2015

140597

273357673.xlsx

NO

NO

GBFD113402

NO

NO

GBFD510501

06/12/2015

Dynamic
Adjustment
Enumeration Type OFF(Off), ON(On)
Between FR and
HR

HUAWEI II
Handover

Interval Type

0~255

141597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~600

142597

273357673.xlsx

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~32

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~255

06/12/2015

143597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~600

144597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~32

145597

273357673.xlsx

NO

06/12/2015

NO

GBFD113402
GBFD510501

Dynamic
Adjustment
Between FR and
Interval Type
HR
HUAWEI II
Handover

0~100

146597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~255

147597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~600

148597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~32

149597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~255

150597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~32

151597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

152597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~16

153597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

1~16

154597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

155597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

156597

273357673.xlsx

NO

06/12/2015

NO

GBFD113402
GBFD510501

Dynamic
Adjustment
Between FR and
Interval Type
HR
HUAWEI II
Handover

0~9

157597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

158597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~255

159597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

-63~255

160597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~255

161597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~255

162597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~7

163597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~100

164597

273357673.xlsx

NO

NO

GBFD113402
GBFD510501

NO

NO

GBFD510501

06/12/2015

Dynamic
Adjustment
Between FR and
Interval Type
HR
HUAWEI II
Handover

0~9

HUAWEI II
Handover

-63~255

Interval Type

165597

273357673.xlsx

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

NO

NO

GBFD510501

HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

06/12/2015

0~255

166597

273357673.xlsx

NO

06/12/2015

NO

GBFD510501

HUAWEI II
Handover

Interval Type

0~7

167597

273357673.xlsx

NO

NO

GBFD510501

HUAWEI II
Handover

Interval Type

NO

NO

GBFD510501

HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

06/12/2015

0~100

168597

273357673.xlsx

NO

NO

GBFD110601
GBFD510501

NO

NO

GBFD510501

06/12/2015

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

HUAWEI II
Handover

Enumeration Type NO(No), YES(Yes)

0~70

169597

273357673.xlsx

NO

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

0~255

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

0~255

170597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

0~63

171597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Enumeration Type OFF(Off), ON(On)

172597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

1~31

173597

273357673.xlsx

NO

06/12/2015

NO

GBFD110601
GBFD510501

HUAWEI I
Handover
HUAWEI II
Handover

Interval Type

1~31

174597

273357673.xlsx

NO

06/12/2015

NO

GBFD113201

Concentric Cell

Interval Type

0~63

175597

273357673.xlsx

NO

06/12/2015

NO

GBFD113201

Concentric Cell

TCHMAXPOWER(Tc
h Max Power),
Enumeration Type
ULBCCHPOWER(Un
derlaid BCCH Power)

176597

273357673.xlsx

NO

06/12/2015

NO

GBFD113201

Concentric Cell

Enumeration Type NO(No), YES(Yes)

177597

273357673.xlsx

Enumeration Number/Bit

N/A

06/12/2015

Unit

480ms

Actual Value Range

480~15360

Default Value

178597

273357673.xlsx

N/A

06/12/2015

480ms

480~15360

179597

273357673.xlsx

N/A

470ms;
480ms

480~7680(TCH);470~752
0(SDCCH)

N/A

470ms;
480ms

480~7680(TCH);470~752
0(SDCCH)

06/12/2015

180597

273357673.xlsx

N/A

06/12/2015

dB

0~128

72

181597

273357673.xlsx

N/A

06/12/2015

None

-64~63

64

182597

273357673.xlsx

N/A

06/12/2015

0.5s

0.5~8

183597

273357673.xlsx

N/A

06/12/2015

0.5s

0.5~8

184597

273357673.xlsx

N/A

06/12/2015

dB

-64~63

68

185597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

NO(No)

186597

273357673.xlsx

N/A

06/12/2015

470ms;
480ms

480~7680(TCH);470~752
0(SDCCH)

187597

273357673.xlsx

N/A

06/12/2015

470ms;
480ms

480~7680(TCH);470~752
0(SDCCH)

188597

273357673.xlsx

N/A

06/12/2015

470ms;
480ms

480~3840(TCH);470~376
0(SDCCH)

189597

273357673.xlsx

N/A

06/12/2015

470ms;
480ms

480~3840(TCH);470~376
0(SDCCH)

190597

273357673.xlsx

NO~0, YES~1

None

NO, YES

N/A

None

0~100

06/12/2015

NO(No)

100

191597

273357673.xlsx

N/A

06/12/2015

1~200

20

192597

273357673.xlsx

N/A

06/12/2015

1~200

193597

273357673.xlsx

N/A

06/12/2015

dB

-30~30

194597

273357673.xlsx

N/A

06/12/2015

dB

-30~30

195597

273357673.xlsx

N/A

06/12/2015

dB

-30~30

10

196597

273357673.xlsx

N/A

06/12/2015

dB

-30~30

197597

273357673.xlsx

N/A

06/12/2015

dB

-30~30

198597

273357673.xlsx

N/A

06/12/2015

dB

-30~30

-10

199597

273357673.xlsx

N/A

06/12/2015

dB

-30~30

200597

273357673.xlsx

N/A

06/12/2015

dB

-30~30

201597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

NO(No)

202597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

NO(No)

203597

273357673.xlsx

N/A

06/12/2015

1~255

10

204597

273357673.xlsx

N/A

06/12/2015

dB

0~63

25

205597

273357673.xlsx

N/A

06/12/2015

None

1~20

206597

273357673.xlsx

N/A

06/12/2015

None

0~100

207597

273357673.xlsx

N/A

06/12/2015

None

0~9

208597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

NO(No)

209597

273357673.xlsx

N/A

06/12/2015

dB

0~255

210597

273357673.xlsx

N/A

06/12/2015

dB

-63~255

20

211597

273357673.xlsx

N/A

06/12/2015

dB

0~255

212597

273357673.xlsx

N/A

06/12/2015

dB

0~255

100

213597

273357673.xlsx

N/A

None

0~7

N/A

0~100

06/12/2015

75

214597

273357673.xlsx

N/A

06/12/2015

None

0~9

215597

273357673.xlsx

N/A

06/12/2015

dB

-63~255

216597

273357673.xlsx

N/A

06/12/2015

dB

0~255

108

217597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

NO(No)

218597

273357673.xlsx

N/A

06/12/2015

None

0~7

219597

273357673.xlsx

N/A

0~100

NO~0, YES~1

None

NO, YES

06/12/2015

15

YES(Yes)

220597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

NO(No)

221597

273357673.xlsx

N/A

470ms;
480ms

480~15360(TCH);470~15
040(SDCCH)

N/A

470ms;
480ms

480~15360(TCH);470~15
040(SDCCH)

06/12/2015

222597

273357673.xlsx

OFF~0, ON~1

None

OFF, ON

N/A

dB

0~255

06/12/2015

OFF(Off)

20

223597

273357673.xlsx

N/A

06/12/2015

0~600

224597

273357673.xlsx

N/A

480ms

480~15360

N/A

dB

0~255

06/12/2015

10

225597

273357673.xlsx

N/A

06/12/2015

0~600

226597

273357673.xlsx

N/A

06/12/2015

480ms

480~15360

227597

273357673.xlsx

N/A

06/12/2015

None

0~100

10

228597

273357673.xlsx

N/A

06/12/2015

dB

0~255

20

229597

273357673.xlsx

N/A

06/12/2015

0~600

230597

273357673.xlsx

N/A

06/12/2015

480ms

480~15360

231597

273357673.xlsx

N/A

06/12/2015

dB

0~255

10

232597

273357673.xlsx

N/A

06/12/2015

480ms

480~15360

233597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

NO(No)

234597

273357673.xlsx

N/A

06/12/2015

470ms;
480ms

480~7680(TCH);470~752
0(SDCCH)

235597

273357673.xlsx

N/A

06/12/2015

470ms;
480ms

480~7680(TCH);470~752
0(SDCCH)

236597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

YES(Yes)

237597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

NO(No)

238597

273357673.xlsx

N/A

06/12/2015

None

0~9

239597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

NO(No)

240597

273357673.xlsx

N/A

06/12/2015

dB

0~255

241597

273357673.xlsx

N/A

06/12/2015

dB

-63~255

30

242597

273357673.xlsx

N/A

06/12/2015

dB

0~255

243597

273357673.xlsx

N/A

06/12/2015

dB

0~255

95

244597

273357673.xlsx

N/A

06/12/2015

None

0~7

245597

273357673.xlsx

N/A

06/12/2015

0~100

85

246597

273357673.xlsx

N/A

None

0~9

N/A

dB

-63~255

06/12/2015

14

247597

273357673.xlsx

N/A

dB

0~255

NO~0, YES~1

None

NO, YES

06/12/2015

103

NO(No)

248597

273357673.xlsx

N/A

06/12/2015

None

0~7

249597

273357673.xlsx

N/A

0~100

NO~0, YES~1

None

NO, YES

06/12/2015

25

NO(No)

250597

273357673.xlsx

N/A

None

0~70

NO~0, YES~1

None

NO, YES

06/12/2015

55

NO(No)

251597

273357673.xlsx

N/A

0~255

15

N/A

0~255

10

06/12/2015

252597

273357673.xlsx

N/A

06/12/2015

dB

0~63

63

253597

273357673.xlsx

OFF~0, ON~1

06/12/2015

None

OFF, ON

OFF(Off)

254597

273357673.xlsx

N/A

06/12/2015

470ms;
480ms

480~14880(TCH);470~14
570(SDCCH)

255597

273357673.xlsx

N/A

06/12/2015

470ms;
480ms

480~14880(TCH);470~14
570(SDCCH)

256597

273357673.xlsx

N/A

06/12/2015

dB

0~63

63

257597

273357673.xlsx

TCHMAXPOWER~0,
ULBCCHPOWER~1

06/12/2015

None

TCHMAXPOWER,
ULBCCHPOWER

ULBCCHPOWER(Unde
rlaid BCCH Power)

258597

273357673.xlsx

NO~0, YES~1

06/12/2015

None

NO, YES

NO(No)

259597

273357673.xlsx

Recommended Value

Initial Value Source

06/12/2015

Radio Planning (Internal


planning)

Impact

Cell

Parameter Relationship

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:BETTERCELL
HOEN] is set to YES. The
following condition must be met:
[G2GNCELL:BETTERCELLSTATT
IME] >=
[G2GNCELL:BETTERCELLLAST
TIME].

260597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:BETTERCELL
HOEN] is set to YES. The
following condition must be met:
[G2GNCELL:BETTERCELLSTATT
IME] >=
[G2GNCELL:BETTERCELLLAST
TIME].

261597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:BQHOEN]
is set to YES. The following
condition must be met:
[G2GNCELL:BQSTATTIME] >=
[G2GNCELL:BQLASTTIME].

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:BQHOEN]
is set to YES. The following
condition must be met:
[G2GNCELL:BQSTATTIME] >=
[G2GNCELL:BQLASTTIME].

262597

273357673.xlsx

72

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLBASICPARA:DIRECTRYE
N] is set to YES. 2.
[G2GNCELL:INTERCELLHYST]
together determine the direct retry
handover hysteresis.

263597

273357673.xlsx

64

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter is used with
"DLEDGETHRES" or
"ULEDGETHRES" to determine
handovers to the edge of a
neighboring cell only if both
"Enhanced Outgoing Cell
Handover Offset" and "EDGE HO
Allowed" are set to YES(Yes).
2. This parameter is used with
"LEVHOHYST" and "HOTHRES"
to determine handovers to a better
neighboring cell only if "Enhanced
Outgoing Cell Handover Offset" is
set to YES(Yes) and
"HOCTRLSWITCH" is set to
HOALGORITHM2(Handover
algorithm II).

264597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:QCKMVHOEN]
is set to YES(Yes).
The parameter value must meet
the following requirement:
[G2GNCELL:HCSSTATTIME] >=
[G2GNCELL:HCSLASTTIME].

265597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:QCKMVHOEN]
is set to YES(Yes).
The parameter value must meet
the following requirement:
[G2GNCELL:HCSSTATTIME] >=
[G2GNCELL:HCSLASTTIME].

266597

273357673.xlsx

68(in densely populated urban Radio Planning (Internal


areas);72(in the suburbs)
planning)

06/12/2015

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
When
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM1(Handover
algorithm I),
[G2GNCELL:INTERCELLHYST]
should be set within the range of
64-127.When
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II),
[G2GNCELL:INTERCELLHYST]
should be set within the range of
0-127.

267597

273357673.xlsx

NO(No)

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
1. If "HOCTRLSWITCH" in the
"SET GCELLHOBASIC" command
is set to HOALGORITHM1, and
"PBGTHOEN", "LEVHOEN",
"CONHOEN" are set to YES, this
parameter is valid.
2. If "HOCTRLSWITCH" in the
"SET GCELLHOBASIC" command
is set to HOALGORITHM2, and
"BETTERCELLHOEN" is set to
YES, this parameter is valid.

268597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:TAHOEN]
is set to YES. The following
condition must be met:
[G2GNCELL:TASTATTIME] >=
[G2GNCELL:TALASTTIME].

269597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:TAHOEN]
is set to YES. The following
condition must be met:
[G2GNCELL:TASTATTIME] >=
[G2GNCELL:TALASTTIME].

270597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOEMG:NODLMRHOEN]
is set to YES(Yes).
The parameter value must meet
the following requirement:
[G2GNCELL:ULBQSTATTIME] >=
[G2GNCELL:ULBQLASTTIME].

271597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[G2GNCELL:NCELLTYPE] is set
to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOEMG:NODLMRHOEN]
is set to YES(Yes).
The parameter value must meet
the following requirement:
[G2GNCELL:ULBQSTATTIME] >=
[G2GNCELL:ULBQLASTTIME].

272597

273357673.xlsx

Default/Recommended
Value

NO(No)

100

06/12/2015

Radio Planning (Internal


planning)

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes),
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
and
[GCELLCHMGAD:TCHLOADOPT
SWITCH] is set to ON(On).

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II).

273597

273357673.xlsx

20

06/12/2015

Radio Planning (Internal


planning)

Cell

-Others:
1. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is valid when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES or
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to a value other than
NO.
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is valid only when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES.
2. This parameter is used with
[GCELLHOAD:CONTINTV] and
[GCELLHOAD:MAXCNTNUM] to
prevent frequent intra-cell
handovers.

274597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Others:
1. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is valid when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES or
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to a value other than
NO.
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is valid only when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES.
2. This parameter is used with
[GCELLHOAD:BANTIME] and
[GCELLHOAD:MAXCNTNUM] to
prevent frequent intra-cell
handovers.

275597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] and
[GCELLHOBASIC:INTERFHOEN]
are both set to YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.

276597

273357673.xlsx

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
[GCELLHOBASIC:INTERFHOEN]
is set to YES, and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] is set to YES.

277597

273357673.xlsx

10

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
[GCELLHOBASIC:INTERFHOEN]
is set to YES, and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] is set to YES.

278597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] and
[GCELLHOBASIC:INTERFHOEN]
are both set to YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.

279597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] and
[GCELLHOBASIC:INTERFHOEN]
in this command are both set to
YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.

280597

273357673.xlsx

-10

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTERFHOEN]
and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] in this command are
both set to YES(Yes).

281597

273357673.xlsx

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTERFHOEN]
and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] in this command are
both set to YES(Yes).

282597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] and
[GCELLHOBASIC:INTERFHOEN]
in this command are both set to
YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.

283597

273357673.xlsx

NO(No)

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] set to HOALGORITHM2 and
[GCELLHOBASIC:INTERFHOEN]
is set to YES.

284597

273357673.xlsx

NO(No)

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:LoadHoEn] is
set to YES(Yes).

285597

273357673.xlsx

10("HOCTRLSWITCH" in
"SET GCELLHOBASIC" is set
to
Radio Planning (Internal
HOALGORITHM1);5("HOCTR
planning)
LSWITCH" in "SET
GCELLHOBASIC" is set to
HOALGORITHM2)

06/12/2015

Cell

-Others:
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is used with
[GCELLHOAD:LOADHOPERIOD],
[GCELLHOAD:LOADHOSTEP],
[GCELLHOAD:LOADOFFSET],
and
[GCELLHOBASIC:DLEDGETHRE
S] to determine the scope of
hierarchical load-based
handovers.
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is used with
[GCELLHOAD:LOADHOPERIOD],
[GCELLHOAD:LOADHOSTEP],
[GCELLHOAD:LOADOFFSET],
and [G2GNCELL:EDGEHOHYST]
or
[G2GNCELL:INTERCELLHYST]
to determine the scope of
hierarchical load-based
handovers.

286597

273357673.xlsx

25("HOCTRLSWITCH" in
"SET GCELLHOBASIC" is set
to
Radio Planning (Internal
HOALGORITHM1);8("HOCTR
planning)
LSWITCH" in "SET
GCELLHOBASIC" is set to
HOALGORITHM2)

06/12/2015

Cell

-Others:
This parameter is valid only when
[GCELLHOBASIC:LOADHOEN] is
set to YES.
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
the default value of this parameter
is 25. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
the default value of this parameter
is 8.
The value of this parameter must
be greater than or equal to the
value of
[GCELLHOAD:LOADHOSTEP].

287597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Others:
1. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is valid when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES or
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to a value other than
NO.
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is valid only when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES.
2. This parameter is used with
[GCELLHOAD:CONTINTV] and
[GCELLHOAD:BANTIME] to limit
the frequency of intra-cell
handovers.

288597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II).

289597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter works with
"AMRFULLTOHALFHOQUALTHR
ESH". If
"AMRFULLTOHALFHOQUALTHR
ESH" and
"AMRF2HHOQUALTHFINE" are
set to 3 and 0, respectively, the
quality threshold is 3.0.
2. The following requirement must
be met:
"AMRFULLTOHALFHOQUALTHR
ESH" x 10 +
"AMRF2HHOQUALTHFINE" <=
70.

290597

273357673.xlsx

NO(No)

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOEMG:HOCTRLSWITC
H] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes). This
parameter is valid only if
[GCELLHOEMG:HOCTRLSWITC
H] is set to
HOALGORITHM1(Handover
algorithm I) and
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to
HOBASECAPANDQUAL(HOBAS
ECAPANDQUAL).

291597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES.
This parameter is invalid if Huawei
handover algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES.

292597

273357673.xlsx

20

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES.

293597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES.
This parameter is invalid if Huawei
handover algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES.

294597

273357673.xlsx

100

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES.

295597

273357673.xlsx

Radio Planning (Internal


planning)

75

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES.

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW],
[GCELLPSCHM:PDCHREFORMI
NG], or
[GCELLCHMGAD:HALFRATEREP
ACKINGSWITCH] is set to YES.

296597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter works with
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALTHRESH]. If this
parameter is set to 0 and
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALTHRESH] is set to 3,
the quality threshold is 3.0.
2. The following condition must be
met:
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALTHRESH] x 10 +
[GCELLHOBASIC:AMRH2FHOQU
ALFINE] <= 70.

297597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes).

298597

273357673.xlsx

108

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes).

299597

273357673.xlsx

NO(No)

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOEMG:HOCTRLSWITC
H] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes). This
parameter is valid only if
[GCELLHOEMG:HOCTRLSWITC
H] is set to
HOALGORITHM1(Handover
algorithm I) and
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to
HOBASECAPANDQUAL(HOBAS
ECAPANDQUAL).

300597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes).

301597

273357673.xlsx

15

YES(Yes)

06/12/2015

Radio Planning (Internal


planning)

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES or
[GCELLIBCAII:IBCAIIHRPriSwitch
] is set to ON.

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.

302597

273357673.xlsx

NO(No)

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.

303597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:FRINGEHOEN]
is set to YES. The following
condition must be met:
[GCELLHOBASIC:EDGESTAT] >=
[GCELLHOBASIC:EDGELAST].

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:FRINGEHOEN]
is set to YES. The following
condition must be met:
[GCELLHOBASIC:EDGESTAT] >=
[GCELLHOBASIC:EDGELAST].

304597

273357673.xlsx

OFF(Off)

Engineering Design

20

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid when
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to ON.

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes).

305597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is invalid if Huawei
handover algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES. This
parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES(Yes)
and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to NO(No).

306597

273357673.xlsx

10

06/12/2015

Radio Planning (Internal


planning)

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes). The following condition
must be met:
[GCELLHOBASIC:FULLTOHALFH
OSTATTIME] >=
[GCELLHOBASIC:FULLTOHALFH
OLASTTIME].

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes).

307597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
The value of this parameter must
be smaller than or equal to the
value of
[GCELLHOBASIC:FULLTOHALFH
ODURATION]. This parameter is
invalid if Huawei handover
algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES. This
parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes).

308597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes). The following condition
must be met:
[GCELLHOBASIC:FULLTOHALFH
OSTATTIME] >=
[GCELLHOBASIC:FULLTOHALFH
OLASTTIME].

309597

273357673.xlsx

10 Engineering Design

06/12/2015

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid when
[GCELLHOBASIC:F2HHOLOADS
TFSWITCH] is set to ON.

310597

273357673.xlsx

20

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes). This parameter is valid
only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] or
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
YES(Yes).

311597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is invalid if Huawei
handover algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES. This
parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] is set to YES(Yes)
and
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
NO(No). This parameter is valid
only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes) and
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
NO(No).

312597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes). This parameter is valid
only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] or
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
YES(Yes). The following condition
must be met:
[GCELLHOBASIC:HALFTOFULLH
OSTATTIME] >=
[GCELLHOBASIC:HALFTOFULLH
OLASTTIME].

313597

273357673.xlsx

10

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes). This parameter is valid
only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] or
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
YES(Yes).

314597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:AMRFULLTOH
ALFHOALLOW] or
[GCELLHOBASIC:AMRHALFTOF
ULLHOQUALALLOW] is set to
YES(Yes). This parameter is valid
only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] or
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
YES(Yes). The following condition
must be met:
[GCELLHOBASIC:HALFTOFULLH
OSTATTIME] >=
[GCELLHOBASIC:HALFTOFULLH
OLASTTIME].

315597

273357673.xlsx

NO(No)

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II).

316597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:INTERFHOEN]
is set to YES and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The following condition must be
met:
[GCELLHOBASIC:INTERFEREST
ATTIME] >=
[GCELLHOBASIC:INTERFERELA
STTIME].

317597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:INTERFHOEN]
is set to YES and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The following condition must be
met:
[GCELLHOBASIC:INTERFEREST
ATTIME] >=
[GCELLHOBASIC:INTERFERELA
STTIME].

318597

273357673.xlsx

YES(Yes)

06/12/2015

Radio Planning (Internal


planning)

Cell

-Others:
This parameter is valid only if
either of the following conditions is
met: 1.
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM1(Handover
algorithm I). 2.
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes).

319597

273357673.xlsx

NO(No)

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes) and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.

320597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter works with
[GCELLHOBASIC:NOAMRFULLT
OHALFHOQUALTHRESH]. If this
parameter is set to 0 and
[GCELLHOBASIC:NOAMRFULLT
OHALFHOQUALTHRESH] is set
to 3, the quality threshold is 3.0.
2. The following condition must be
met:
[GCELLHOBASIC:NOAMRFULLT
OHALFHOQUALTHRESH] x 10 +
[GCELLHOBASIC:NOAMRF2HHO
QUALTHFINE] <= 70.

321597

273357673.xlsx

NO(No)

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes). This
parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM1(Handover
algorithm I) and
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to
HOBASECAPANDQUAL(HOBAS
ECAPANDQUAL).

322597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes). This parameter is
invalid if Huawei handover
algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES.

323597

273357673.xlsx

30

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES.

324597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to
YES(Yes). This parameter is
invalid if Huawei handover
algorithm II is used and
[GCELLHOBASIC:INTRACELLFH
OPTSWITCH] is set to YES.

325597

273357673.xlsx

95

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES.

326597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES.

327597

273357673.xlsx

85

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW],
[GCELLPSCHM:PDCHREFORMI
NG], or
[GCELLCHMGAD:HALFRATEREP
ACKINGSWITCH] is set to YES.

328597

273357673.xlsx

Radio Planning (Internal


planning)

14

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
1. This parameter works with
[GCELLHOBASIC:NOAMRFULLT
OHALFHOQUALTHRESH]. If this
parameter is set to 0 and
[GCELLHOBASIC:NOAMRFULLT
OHALFHOQUALTHRESH] is set
to 3, the quality threshold is 3.0.
2. The following condition must be
met:
[GCELLHOBASIC:NOAMRFULLT
OHALFHOQUALTHRESH] x 10 +
[GCELLHOBASIC:NOAMRF2HHO
QUALTHFINE] <= 70.

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES.

329597

273357673.xlsx

103

NO(No)

06/12/2015

Radio Planning (Internal


planning)

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES.

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes). This
parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM1(Handover
algorithm I) and
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to
HOBASECAPANDQUAL(HOBAS
ECAPANDQUAL).

330597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] or
[GCELLHOBASIC:NOAMRHALFT
OFULLHOQUALALLOW] is set to
YES.

331597

273357673.xlsx

25

NO(No)

06/12/2015

Radio Planning (Internal


planning)

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
HOALGORITHM1.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:NOAMRFULLT
OHALFHOALLOW] is set to YES
or
[GCELLIBCAII:IBCAIIHRPriSwitch
] is set to ON.

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:BETTERCELL
HOEN] is set to YES.

332597

273357673.xlsx

55

NO(No)

06/12/2015

Radio Planning (Internal


planning)

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:BQHOEN] is
set to YES or
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOEMG:NODLMRHOEN]
is set to YES.

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOCTRL:BTSMESRPTP
REPROC] is set to
BSC_Preprocessing(BSC
preprocessing).

333597

273357673.xlsx

15

10

06/12/2015

Radio Planning (Internal


planning)

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOFITPEN:HOCTRLSWI
TCH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOBASIC:INTERFHOEN]
is set to YES.

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOFITPEN:HOCTRLSWI
TCH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:LoadHoEn]
is set to YES.

334597

273357673.xlsx

63

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOFITPEN:HOCTRLSWI
TCH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:LoadHoEn]
is set to YES.

335597

273357673.xlsx

OFF(Off)

06/12/2015

Engineering Design

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:LoadHoEn]
is set to YES.

336597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOFITPEN:HOCTRLSWI
TCH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.

337597

273357673.xlsx

06/12/2015

Radio Planning (Internal


planning)

Cell

is not equal to 80, the value of


[GCELLHOAD:ABCWaitMaxTime]
must be greater than five times the
maximum value of the following
filters:
[GCELLHOFITPEN:SIGSTRFLTL
EN],
[GCELLHOFITPEN:SIGQUAFLTL
EN],
[GCELLHOFITPEN:DATASTRFLT
LEN],
[GCELLHOFITPEN:DATAQUAFLT
LEN],
[GCELLHOFITPEN:TAFLTLEN],
and
[GCELLHOFITPEN:TASIGSTRFL
TLEN]. If
[GCELLCHMGAD:IBCAALLOWE
D] is set to Yes, the value of
[GCELLHOAD:ABCWaitMaxTime]
must be greater than five times the
value of
[GCELLCHMGAD:IBCAASSWAIT
MEASURERPTTIME]. If
[GCELLHOAD:SDCCHWaitMREn]
is set to Yes, the value of
[GCELLHOAD:ABCWaitMaxTime]
must be greater than that of
[GCELLHOAD:SDCCHWaitMRTim
eLen].
-Parameter relationship with
conditions:
This parameter is valid only when
[GCELLHOFITPEN:HOCTRLSWI
TCH] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:

338597

273357673.xlsx

63

06/12/2015

Radio Planning (Internal


planning)

Cell

-Parameter relationship with


conditions:
This parameter is valid only when
[GCELLHOIUO:HOCTRLSWITCH
] is set to HOALGORITHM2.
The parameter will be set with
NULL when it is invalid.
-Others:
This parameter is valid only when
[GCELL:IUOTP] is set to
Concentric_cell and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.

339597

273357673.xlsx

ULBCCHPOWER(Underlaid
BCCH Power)

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if all of
the following conditions are met:
1.
[GCELLPWRBASIC:PWRCTRLS
W] is set to PWR3 and
[GCELLPWR3:PWRCTRLOPTIMI
ZEDEN] is set to YES.
2.
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
3.
[GCELLOTHEXT:PCHOCMPCON]
is set to YES.

340597

273357673.xlsx

NO(No)

06/12/2015

Default/Recommended
Value

Cell

-Others:
This parameter is valid only if
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes) and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.

341597

273357673.xlsx

Access

Service Interrupted After Modification

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

Interruption Scope

N/A

342597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

343597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

344597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

345597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

346597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

347597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

348597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

349597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

350597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

351597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

352597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

353597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

354597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

355597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

356597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

357597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

358597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

359597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

360597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

361597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

362597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

363597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

364597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

365597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

366597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

367597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

368597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

369597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

370597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

371597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

372597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

373597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

374597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

375597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

376597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

377597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

378597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

379597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

380597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

381597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

382597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

383597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

384597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

385597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

386597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

387597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

388597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

389597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

390597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

391597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

392597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

393597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

394597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

395597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

396597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

397597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

398597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

399597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

400597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

401597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

402597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

403597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

404597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

405597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

406597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

407597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

408597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

409597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

410597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

411597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

412597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

413597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

414597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

415597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

N/A

Read & Write No (And no impact on the UE in idle mode)

N/A

06/12/2015

416597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

417597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

418597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

419597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

420597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

421597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

422597

273357673.xlsx

Read & Write No (And no impact on the UE in idle mode)

06/12/2015

N/A

423597

273357673.xlsx

Interruption Duration (min)

N/A

06/12/2015

Caution

None

Validation of Modification

The parameter modification has


no impact on the equipment.

424597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

425597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

426597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

427597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

428597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

429597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

430597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

431597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

432597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

433597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

434597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

435597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

436597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

437597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

438597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

439597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

440597

273357673.xlsx

N/A

06/12/2015

None

N/A

441597

273357673.xlsx

N/A

06/12/2015

None

N/A

442597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

443597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

444597

273357673.xlsx

N/A

06/12/2015

None

N/A

445597

273357673.xlsx

N/A

06/12/2015

None

N/A

446597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

447597

273357673.xlsx

N/A

06/12/2015

None

N/A

448597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

449597

273357673.xlsx

N/A

06/12/2015

If the value of
"Current HO
Control
Algorithm" in
"SET
GCELLHOB
ASIC" is
changed, the
The parameter modification has
value of this
no impact on the equipment.
parameter is
automatically
changed to
the default
value
correspondin
g to the
algorithm.

450597

273357673.xlsx

N/A

06/12/2015

If the value of
"Current HO
Control
Algorithm" in
"SET
GCELLHOB
ASIC" is
changed, the
The parameter modification has
value of this
no impact on the equipment.
parameter is
automatically
changed to
the default
value
correspondin
g to the
algorithm.

451597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

452597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

453597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

454597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

455597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

456597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

457597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

458597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

459597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

460597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

461597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

462597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

463597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

464597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

465597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

466597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

467597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

468597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

469597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

470597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

471597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

472597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

473597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

474597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

475597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

476597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

477597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

478597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

479597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

480597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

481597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

482597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

483597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

484597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

485597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

486597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

487597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

488597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

489597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

490597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

491597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

492597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

493597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

494597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

495597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

496597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

497597

273357673.xlsx

N/A

None

The parameter modification has


no impact on the equipment.

N/A

None

The parameter modification has


no impact on the equipment.

06/12/2015

498597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

499597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

500597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

501597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

502597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

503597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

504597

273357673.xlsx

N/A

06/12/2015

None

The parameter modification has


no impact on the equipment.

505597

273357673.xlsx

Impact on Radio Network Performance

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.
If this parameter is set to a small value,
unnecessary handovers are triggered.

06/12/2015

Introduced in Version

BSC6910 V100R015C00

Attribute

Radio

506597

273357673.xlsx

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.

06/12/2015

BSC6910 V100R015C00

Radio

507597

273357673.xlsx

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.
If this parameter is set to a small value,
unnecessary handovers are triggered.

BSC6910 V100R015C00

Radio

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.

BSC6910 V100R015C00

Radio

06/12/2015

508597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

509597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

510597

273357673.xlsx

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, causing call drops or more handovers.
If this parameter is set to a small value,
congestion occurs in macro cells.

06/12/2015

BSC6910 V100R015C00

Radio

511597

273357673.xlsx

If this parameter is set to a large value,


congestion occurs in macro cells.
If this parameter is set to a small value,
handovers cannot be performed in a timely
manner, causing call drops or more handovers.

06/12/2015

BSC6910 V100R015C00

Radio

512597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

513597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

514597

273357673.xlsx

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, causing call drops.
If this parameter is set to a small value,
unnecessary handovers are triggered.

06/12/2015

BSC6910 V100R015C00

Radio

515597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

516597

273357673.xlsx

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, causing call drops.
If this parameter is set to a small value,
unnecessary handovers are triggered.

06/12/2015

BSC6910 V100R015C00

Radio

517597

273357673.xlsx

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
handovers cannot be performed in a timely
manner, causing call drops.

06/12/2015

BSC6910 V100R015C00

Radio

518597

273357673.xlsx

If this parameter is set to YES, sufficient idle


TCHFs are ensured, but the number of intra-cell
handovers increases. If this parameter is set to
NO, radio network performance is not affected.

BSC6910 V100R015C00

Radio

If this parameter is set to a small value, MSs are


unlikely to hand over to the cell by performing
inter-layer load-based handovers. If this
parameter is set to a large value, MSs are likely
to hand over to the cell by performing inter-layer
load-based handovers.

BSC6910 V100R015C00

Radio

06/12/2015

519597

273357673.xlsx

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, causing call drops.
If this parameter is set to a small value,
handovers are performed frequently.

06/12/2015

BSC6910 V100R015C00

Radio

520597

273357673.xlsx

If this parameter is set to a small value, intra-cell


handover penalties become ineffective, causing
frequent handovers.
If this parameter is set to a large value, intra-cell BSC6910 V100R015C00
handover penalties are performed frequently. As a
result, handovers cannot be performed in a timely
manner, causing call drops.

06/12/2015

Radio

521597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

522597

273357673.xlsx

The smaller the value of this parameter, the


smaller the number of downlink interference
handovers. The larger the value of this parameter, BSC6910 V100R015C00
the larger the number of downlink interference
handovers.

06/12/2015

Radio

523597

273357673.xlsx

The smaller the value of this parameter, the larger


the number of downlink interference handovers.
BSC6910 V100R015C00
The larger the value of this parameter, the smaller
the number of downlink interference handovers.

06/12/2015

Radio

524597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

525597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

526597

273357673.xlsx

The smaller the value of this parameter, the


smaller the number of uplink interference
handovers. The larger the value of this parameter, BSC6910 V100R015C00
the larger the number of uplink interference
handovers.

06/12/2015

Radio

527597

273357673.xlsx

The smaller the value of this parameter, the larger


the number of uplink interference handovers. The
BSC6910 V100R015C00
larger the value of this parameter, the smaller the
number of uplink interference handovers.

06/12/2015

Radio

528597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

529597

273357673.xlsx

If this parameter is set to YES(Yes), underlaid


and overlaid subcells use their own interference
handover offsets to control the impact of
BSC6910 V100R015C00
interference handovers on the handover success
rate and call drop rate.

06/12/2015

Radio

530597

273357673.xlsx

If this parameter is set to YES(Yes), the TCH


congestion rate and the number of ping-pong
handovers decrease when intra-BSC load-based
BSC6910 V100R015C00
handovers occur. If this parameter is set to
NO(No), radio network performance is not
affected.

06/12/2015

Radio

531597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

532597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

533597

273357673.xlsx

If this parameter is set to a small value,


handovers are not performed in a timely manner,
leading to call drops or deteriorating the speech BSC6910 V100R015C00
quality. If this parameter is set to a large value,
unnecessary handovers are performed.

06/12/2015

Radio

534597

273357673.xlsx

If this parameter is set to a small value, the interlayer load-based handover is likely to trigger in
the serving cell and MSs are likely to hand over to
BSC6910 V100R015C00
a neighboring cell of a low layer. If this parameter
is set to a large value, the inter-layer load-based
handover is unlikely to trigger in the serving cell.

06/12/2015

Radio

535597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

536597

273357673.xlsx

If this switch is turned on, AMR FR calls can be


switched into AMR HR calls to relieve the network
congestion, but the number of handovers
increases and the voice quality deteriorates; if this
BSC6910 V100R015C00
switch is turned off, AMR FR calls cannot be
switched into AMR HR calls, that is, network
congestion cannot be relieved through the
handover from TCHF to TCHH.

06/12/2015

Radio

537597

273357673.xlsx

If this parameter is set to a large value, the


handover margin increases in a short period and
many MSs are handed over from TCHFs to
TCHHs, deteriorating the speech quality.
If this parameter is set to a small value, the
BSC6910 V100R015C00
handover margin is enlarged slowly and it takes a
long time to initiate a TCHF-TCHH handover. As a
result, network congestion cannot be relieved in a
timely manner.

06/12/2015

Radio

538597

273357673.xlsx

If this parameter is set to a large value, only MSs


in the center of the cell can meet the handover
condition. Therefore, the network congestion
cannot be relieved in a timely manner.
BSC6910 V100R015C00
If this parameter is set to a small value, MSs at
the edge of the cell can also meet the handover
condition, deteriorating the voice quality.

06/12/2015

Radio

539597

273357673.xlsx

If this parameter is set to a large value, the


handover margin increases in a short period and
many MSs are handed over from TCHFs to
TCHHs, deteriorating the speech quality.
If this parameter is set to a small value, the
BSC6910 V100R015C00
handover margin is enlarged slowly and it takes a
long time to initiate a TCHF-TCHH handover. As a
result, network congestion cannot be relieved in a
timely manner.

06/12/2015

Radio

540597

273357673.xlsx

If this parameter is set to a large value, MSs at


the edge of the cell can also meet the handover
condition, deteriorating the voice quality.
If this parameter is set to a small value, only MSs BSC6910 V100R015C00
in the center of the cell can meet the handover
condition. therefore, the network congestion
cannot be relieved in time.

06/12/2015

Radio

541597

273357673.xlsx

If this parameter is set to a large value, MSs with


poor quality can also meet the handover
condition, deteriorating the voice quality.
If this parameter is set to a small value, little MSs BSC6910 V100R015C00
can meet the handover condition. Therefore,
network congestion cannot be relieved in a timely
manner.

Radio

If this parameter is set to a large value, calls


cannot be handed over to TCHHs in a short
period when the traffic volume is increased
greatly. Therefore, network congestion cannot be
BSC6910 V100R015C00
relieved in a timely manner. If this parameter is
set to a small value, calls are handed over to
TCHHs unnecessarily, causing MOS loss of the
customer.

Radio

06/12/2015

542597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

543597

273357673.xlsx

If this parameter is set to a large value, only MSs


in the center of the cell use the TCHHs, leading to
a waste of timeslots and network congestion
cannot be relieved in a timely manner. If this
BSC6910 V100R015C00
parameter is set to a small value, MSs at the
edge of the cell and with poor quality also cannot
be handed over to TCHFs, deteriorating the voice
quality.

06/12/2015

Radio

544597

273357673.xlsx

If this parameter is set to a large value, MSs at


the edge of the cell and with poor quality also
cannot be handed over to TCHFs, deteriorating
the voice quality. If this parameter is set to a small
BSC6910 V100R015C00
value, only MSs in the center of the cell use
TCHHs, leading to a waste of timeslots and
network congestion cannot be relieved in a timely
manner.

06/12/2015

Radio

545597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

546597

273357673.xlsx

If this parameter is set to a large value,


handovers cannot be triggered even if the receive
signal quality is poor, deteriorating the voice
quality.
BSC6910 V100R015C00
If this parameter is set to a small value,
handovers are triggered when the receive signal
quality is favorable. Therefore, congestion is
difficult to relieve.

06/12/2015

Radio

547597

273357673.xlsx

If this parameter is set to a small value, there are


half-rate calls when load is light, decreasing the
MOS value unnecessarily. If this parameter is set BSC6910 V100R015C00
to a large value, HR-to-FR handovers occur when
load is heavy, causing congestion.

Radio

None

Radio

06/12/2015

BSC6910 V100R015C00

548597

273357673.xlsx

If this parameter is set to YES(Yes), the BSC


triggers a handover for an MS with low receive
level in a timely manner, decreasing the call drop BSC6910 V100R015C00
rate. If this parameter is set to NO(No), wireless
performance does not deteriorate.

06/12/2015

Radio

549597

273357673.xlsx

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.
If this parameter is set to a small value,
unnecessary handovers are triggered.

BSC6910 V100R015C00

Radio

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.

BSC6910 V100R015C00

Radio

06/12/2015

550597

273357673.xlsx

None

BSC6910 V100R015C00

Radio

The smaller the value of this parameter, the


poorer the voice quality.
The larger the value of this parameter, the more
difficult the congestion to relieve.

BSC6910 V100R015C00

Radio

06/12/2015

551597

273357673.xlsx

If this parameter is set to a small value, the


duration of an AMR TCHF-TCHH handover is
short after the handover is triggered. Therefore,
few MSs can be handed over from TCHFs to
TCHHs, and the congestion relieving capability
decreases.
BSC6910 V100R015C00
If this parameter is set to a large value, the
duration of an AMR TCHF-TCHH handover is
long after the handover is triggered. Therefore,
the MSs on the edge of the cell are handed over
from TCHFs to TCHHs, deteriorating the voice
quality.

06/12/2015

Radio

552597

273357673.xlsx

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, causing congestion.
If this parameter is set to a small value,
unnecessary handovers are triggered.

BSC6910 V100R015C00

Radio

If this parameter is set to a large value,


handovers cannot be performed in a timely
BSC6910 V100R015C00
manner, causing congestion. If this parameter is
set to a small value, the voice quality deteriorates.

Radio

06/12/2015

553597

273357673.xlsx

If this parameter is set to a small value, the


handover zone is enlarged in a short time, and
therefore many MSs are handed over from
TCHFs to TCHHs.
If this parameter is set to a large value, the
BSC6910 V100R015C00
handover zone is enlarged slowly and it takes a
long time to initiate a TCHF-TCHH handover.
Therefore, and the congestion relieving capability
decreases.

06/12/2015

Radio

554597

273357673.xlsx

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
handovers cannot be performed in a timely
manner, causing congestion.

06/12/2015

BSC6910 V100R015C00

Radio

555597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

556597

273357673.xlsx

If this parameter is set to a large value, only an


MS close to the overlaid subcell can be assigned
TCHHs. Therefore, timeslots are wasted.
If this parameter is set to a small value, an MS of
BSC6910 V100R015C00
bad quality on the edge of the overlaid subcell
cannot be handed over from TCHH to TCHF.
Therefore, the voice quality of the call
deteriorates.

06/12/2015

Radio

557597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

558597

273357673.xlsx

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, affecting voice quality.
If this parameter is set to a small value,
unnecessary handovers are triggered.

06/12/2015

BSC6910 V100R015C00

Radio

559597

273357673.xlsx

If this parameter is set to a large value, only MSs


in the center area of the overlaid subcell can be
assigned TCHHs. Therefore, timeslots are wasted
and the congestion relieving capability decreases.
BSC6910 V100R015C00
If this parameter is set to a small value, MSs on
the edge of the overlaid subcell also use TCHHs.
Therefore, the voice quality of the call
deteriorates.

06/12/2015

Radio

560597

273357673.xlsx

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
handovers cannot be performed in a timely
manner, affecting voice quality.

06/12/2015

BSC6910 V100R015C00

Radio

561597

273357673.xlsx

If this parameter is set to YES(Yes), the number


of better cell handovers increases, but the
number of bad quality (BQ) handovers
decreases. If this parameter is set to NO(No),
radio network performance is not affected.

06/12/2015

BSC6910 V100R015C00

Radio

562597

273357673.xlsx

If this parameter is set to a large value,


handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.
If this parameter is set to a small value,
unnecessary handovers are triggered.

06/12/2015

BSC6910 V100R015C00

Radio

563597

273357673.xlsx

If this parameter is set to a large value,


unnecessary handovers are triggered.
If this parameter is set to a small value,
handovers cannot be performed in a timely
manner, affecting voice quality or causing call
drops.

06/12/2015

BSC6910 V100R015C00

Radio

564597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

565597

273357673.xlsx

If this parameter is set to YES, intra-cell loadbased TCHF-TCHH handover is controlled


accurately to avoid ping-pong handovers arising
from intra-cell load adjustment.

06/12/2015

BSC6910 V100R015C00

Radio

566597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

567597

273357673.xlsx

If this parameter is set to YES, FR calls can be


switched into HR calls to relieve the network
congestion, but the number of handovers
increases and the voice quality deteriorates; if this
BSC6910 V100R015C00
parameter is set to NO, FR calls cannot be
switched into HR calls, that is, network
congestion cannot be relieved through the
handover from TCHF to TCHH.

06/12/2015

Radio

568597

273357673.xlsx

If this parameter is set to a large value, the


handover margin increases in a short period and
many MSs are handed over from TCHFs to
TCHHs, deteriorating the speech quality.
If this parameter is set to a small value, the
BSC6910 V100R015C00
handover margin is enlarged slowly and it takes a
long time to initiate a TCHF-TCHH handover. As a
result, network congestion cannot be relieved in a
timely manner.

06/12/2015

Radio

569597

273357673.xlsx

If this parameter is set to a large value, only MSs


in the center of the cell can meet the handover
condition. Therefore, network congestion cannot
be relieved in a timely manner.
BSC6910 V100R015C00
If this parameter is set to a small value, MSs at
the edge of the cell can also meet the handover
condition, deteriorating the voice quality.

06/12/2015

Radio

570597

273357673.xlsx

If this parameter is set to a large value, the


handover margin increases in a short period and
many MSs are handed over from TCHFs to
TCHHs, deteriorating the speech quality.
If this parameter is set to a small value, the
BSC6910 V100R015C00
handover margin is enlarged slowly and it takes a
long time to initiate a TCHF-TCHH handover. As a
result, network congestion cannot be relieved in a
timely manner.

06/12/2015

Radio

571597

273357673.xlsx

If this parameter is set to a large value, only MSs


in the center of the cell can meet the handover
condition. Therefore, network congestion cannot
be relieved in a timely manner.
BSC6910 V100R015C00
If this parameter is set to a small value, MSs at
the edge of the cell can also meet the handover
condition, deteriorating the voice quality.

06/12/2015

Radio

572597

273357673.xlsx

If this parameter is set to a large value, MSs with


poor quality can also meet the handover
condition, deteriorating the voice quality.
If this parameter is set to a small value, little MSs BSC6910 V100R015C00
can meet the handover condition. Therefore,
network congestion cannot be relieved in a timely
manner.

06/12/2015

Radio

573597

273357673.xlsx

If this parameter is set to a large value, calls


cannot be handed over to TCHHs in a short
period when the traffic volume is increased
greatly. Therefore, network congestion cannot be
BSC6910 V100R015C00
relieved in a timely manner. If this parameter is
set to a small value, calls are handed over to
TCHHs unnecessarily, causing MOS loss of the
customer.

06/12/2015

Radio

574597

273357673.xlsx

None

BSC6910 V100R015C00

Radio

If this parameter is set to a large value, only MSs


in the center of the cell use TCHHs, leading to a
waste of timeslots and network congestion cannot
be relieved in a timely manner. If this parameter is BSC6910 V100R015C00
set to a small value, MSs at the edge of the cell
and with poor quality also cannot be handed over
to the TCHF, deteriorating the voice quality.

Radio

06/12/2015

575597

273357673.xlsx

If this parameter is set to a large value, MSs at


the edge of the cell and with poor quality also
cannot be handed over to the TCHFs,
deteriorating the voice quality. If this parameter is
BSC6910 V100R015C00
set to a small value, only MSs in the center of the
cell use TCHHs, leading to a waste of timeslots
and the network congestion cannot be relieved in
a timely manner.

Radio

None

Radio

06/12/2015

BSC6910 V100R015C00

576597

273357673.xlsx

If this parameter is set to a large value, handover


cannot be triggered even when the quality is poor,
deteriorating the voice quality. If this parameter is
BSC6910 V100R015C00
set to a small value, handover is triggered even
when the quality is favorable. As a result, network
congestion cannot be relieved in a timely manner.

06/12/2015

Radio

577597

273357673.xlsx

If this parameter is set to a large value,


handovers can be triggered when the network is
overloaded, causing congestion.
BSC6910 V100R015C00
If this parameter is set to a small value, there are
half-rate calls when the network load is low,
decreasing the mean opinion score (MOS).

Radio

None

Radio

06/12/2015

BSC6910 V100R015C00

578597

273357673.xlsx

If this parameter is set to a large value, handover


cannot be performed when the uplink voice
quality is poor, leading to call drops. If this
BSC6910 V100R015C00
parameter is set to a small value, unnecessary
handovers are performed, deteriorating the voice
quality.

Radio

If this parameter is set to YES(Yes), in a scenario


where downlink measurement reports are lost
continuously, handovers due to quality problems
are triggered more quickly, the number of
BSC6910 V100R015C00
handovers increases, and the call drop rate
decreases. If this parameter is set to NO(No),
radio network performance is not affected.

Radio

06/12/2015

579597

273357673.xlsx

If this parameter is set to a large value and if


interference is strong after handovers are
successful, call drops occur. If this parameter is
set to a small value, handovers are performed
frequently, increasing the signaling load.

BSC6910 V100R015C00

Radio

If this parameter is set to a large value, the MS is


unlikely to be handed over back to the source
cell, leading to call drops due to no suitable
neighboring cells.
BSC6910 V100R015C00
If this parameter is set to a small value, the MS is
likely to be handed over back to the source cell,
leading to ping-pong handovers.

Radio

06/12/2015

580597

273357673.xlsx

If this parameter is set to a large value, the MS is


unlikely to be handed over back to the source
cell, leading to call drops due to no suitable
neighboring cells.
BSC6910 V100R015C00
If this parameter is set to a small value, the MS is
likely to be handed over back to the source cell,
leading to ping-pong handovers.

06/12/2015

Radio

581597

273357673.xlsx

If this parameter is set to ON the possibility of


ping-pong effect is reduced when load-based
handovers and other types of handovers are
performed.

06/12/2015

BSC6910 V100R015C00

Radio

582597

273357673.xlsx

The value of this parameter should be smaller


than "NCELLFLTLEN" because the signaling
BSC6910 V100R015C00
channel seizure duration is shorter than the traffic
channel seizure duration for the MS.

06/12/2015

Radio

583597

273357673.xlsx

None

06/12/2015

BSC6910 V100R015C00

Radio

584597

273357673.xlsx

If this parameter is set to a large value,


congestion in the underlaid subcell is difficult to
relieve;If this parameter is set to a small value, a
large number of calls are handed over from the
BSC6910 V100R015C00
underlaid subcell to the overlaid subcell
simultaneously, causing congestion in the
overlaid subcell and handover failures.

06/12/2015

Radio

585597

273357673.xlsx

Setting this parameter to TCHMAXPOWER


decreases the call drop rate for MSs in the
overlaid subcell and the number of overlaid-tounderlaid handovers.

06/12/2015

BSC6910 V100R016C00

Radio

586597

273357673.xlsx

If this parameter is set to YES, intra-cell loadbased handovers between overlaid and underlaid
BSC6910 V100R015C00
subcells are precisely controlled to avoid pingpong handovers due to intra-cell load adjustment.

06/12/2015

Radio

587597

MO
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL

Parameter ID
BETTERCELLLASTTIME
BETTERCELLSTATTIME
BQLASTTIME
BQSTATTIME
DRHOLEVRANGE
EDOUTHOOFFSET
HCSLASTTIME
HCSSTATTIME
TALASTTIME
TASTATTIME
ULBQLASTTIME
ULBQSTATTIME

Parameter Name
Better Cell HO Valid Time
Better Cell HO Watch Time
BQ HO Valid Time
BQ HO Watch Time
Directed Retry Handover Level Rang
Enhanced Outgoing Cell Handover O
HCS HO Valid Time
HCS HO Watch Time
TA HO Valid Time
TA HO Watch Time
UL BQ HO Last Time
UL BQ HO Static Time

GCELLCHMGHALFRATEREPACKINGSWITCH

TCHH Integration

GCELLHOADACCTHRESLAYER
GCELLHOADINTERFEREDLEVOFF
GCELLHOADINTERFEREDLEVOFFOL
GCELLHOADINTERFEREDLQUALOFFOL
GCELLHOADINTERFEREDQUALOFF
GCELLHOADINTERFEREULEVOFF
GCELLHOADINTERFEREULEVOFFOL
GCELLHOADINTERFEREULQUALOFFOL
GCELLHOADINTERFEREUQUALOFF

Inter-Layer Load HO Access Thresho


DLevOffset for Interfere HO
OL DL Level Offset for Interference
OL DL Quality Offset for Interferenc
DQualOffset for Interfere HO
ULevOffset for Interfere HO
OL UL Level Offset for Interference
OL UL Quality Offset for Interferenc
UQualOffset for Interfere HO

GCELLHOADINTERFEROFFSWITCHOL
GCELLHOADLOADHOHYSTADAPEN
GCELLHOADTRIGTHRESLAYER
GCELLHOBABETTERCELLHOEN
GCELLHOBAEDGEHOHYSTEN
GCELLHOBAEDGELAST
GCELLHOBAEDGESTAT
GCELLHOBAHOPRIOMODEN
GCELLHOBAINTERFERELASTTIME
GCELLHOBAINTERFERESTATTIME
GCELLHOBAINTRACELLFHOPTSWITCH
GCELLHOBAPATHLOSSHOEN
GCELLHOEMULQUALIMIT
GCELLHOFITINITUPFILEN
GCELLHOFITINTERFEREHOPENTIME
GCELLHOFITLOADHOPENTIME
GCELLHOFITLOADHOPENVALUE
GCELLHOFITLoadHoPunishInheritSwitch
GCELLHOFITNSIGSTRFLTLEN
GCELLHOFITTASIGSTRFLTLEN
GCELLHOIU ENUTOOLOADINILEV
GCELLHOIU IUOOlPowerCompPolicy
GCELLHOIU UOLOADOPTSWITCH

OL Offset for Interference HO


Cell Edge Shrink Based on Load
Inter-Layer Load HO Start Threshold
Better Cell Handover Enable
Low Hysteresis Allowed for Edge HO
Handover Algorithm II Edge HO Vali
Handover Algorithm II Edge HO Wat
HO Priority Adjustment
Interfere HO Valid Time
Interfere HO Static Time
Intra-cell F/H Load Control Optimizat
Pathloss Ho. Enable
UL Qual. Threshold
Initial Increment Filtering Allowed
Penalty Time on Interfere HO
Penalty Time on Load HO
Penalty Value on Load HO
Load HO Penalty Optimization
NCell Filter Length for SDCCH Level
TA Filter Length for SDCCH Level
IniLev for EnUtoO Load HO
Overlaid Level Power Compensate Po
OL/UL Load Control Optimization

NE
MML Command Meaning
IsKey
Mandatory Feature ID Feature Name Value Type
ADD G2GNCELL
BSC6910
Period during NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
ADD G2GNCELL
BSC6910
Period during NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
ADD G2GNCELL
According to the P/N rule, if the conditions for emergency BQ handover are met in P of N measurem
BSC6910
NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
This
parameter
number
P. for emergency BQ handover are met in P of N measurem
ADD G2GNCELL
According
to thespecifies
P/N rule,the
if the
conditions
BSC6910
NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
This parameter specifies the number N. GBFD-110601HUAWEI I Handover
ADD G2GNCELL
BSC6910
Difference
bet
N
O
NO
Interval
Typeof "ULEDGETHRES
Uplink receive level of the serving cell after
power control compensation
< Value
MOD
G2GNCELL
GBFD-510501
Handover
ADD G2GNCELL
GBFD-110601HUAWEI
HUAWEI II
I Handover
BSC6910
Downlink receive
NO level of the
NO
serving cell after power control compensation
Interval<Type
Value of "DLEDGETHR
MOD
G2GNCELL
GBFD-510501
HUAWEI
Handover
ADD G2GNCELL
According
toofthe
P/N rule,
if the conditions
forhandovers
the handover
to
a IIdifferent
micro cell
to fast
move
In
the
case
Huawei
handover
algorithm
II,
to
a
better
neighboring
cell due
can be
triggered
BSC6910
NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
This
parameter
number
P. for the handover to a different micro cell due to fast move
ADD G2GNCELL
According
to thespecifies
P/N rule,the
if the
conditions
BSC6910
NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
This parameter specifies the number N.
ADD G2GNCELL
BSC6910
The P/N crite NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
ADD G2GNCELL
BSC6910
The P/N crite NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
ADD G2GNCELL
BSC6910
Period duringNO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
ADD G2GNCELL
BSC6910
Period duringNO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL

BSC6910

SET GCELL Whether to coNO

BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910

SET GCELL
SET GCELL
SET GCELL
SET GCELL
SET GCELL
SET GCELL
SET GCELL
SET GCELL
SET GCELL

NO

GBFD-113402Dynamic Adjustment Between FR and HR


Enumeration
GBFD-115504AMR FR/HR Dynamic Adjustment

This parameter
NO
GBFD-51050
HUAWEI II HaInterval Type
"RXQUALn"
(1
<= n <= 12):NO
used for non-AMR
FR calls.
The receive quality
NO equals the
NO sum of theGBFD-51050
value of "RXQUALn"
HUAWEIand
II Hathe
Interval
corresponding
Type
quality offset
GBFD-113201Concentric Cell
2
<=
n
<=
12
Downlink receNO
NO
Interval Type
HUAWEI
Handover
Downlink receive quality threshold offset GBFD-510501
GBFD-113201
for overlaid subcells
Concentric
in II
a Cell
concentric cell during the interfere
NO
Interval Type
"RXQUALn"
(1
<=
n <= 12):IINO
used
forand
non-AMR
FR calls.
When
handover
algorithm
is used
GBFD-510501
"INTERFEROFFSWITCHOL"
HUAWEI II Handover
is set to YES(Yes), the downl
The receive quality
NO
NO
sumforofnon-AMR
theGBFD-51050
value FR
of "RXQUALn"
HUAWEIand
II Hathe
Interval
corresponding
Type
quality offset
"RXQUALn"
(1
<= nequals
<= 12):the
used
calls.
2
<=receive
n <= 12quality
NO equals the
NO sum of theGBFD-51050
HUAWEIand
II Hathe
Interval
Type
The
value of "RXQUALn"
corresponding
quality offset
Uplink
level offset for overlaid subcells
GBFD-113201
in a concentric
Concentric
cell Cell
during the interference handover d
2 <= n receive
<= 12 NO
NO
Interval Type
When
algorithm
II is used
"INTERFEROFFSWITCHOL"
HUAWEI
II Cell
Handover
is set
YES(Yes),
the uplink
Uplink handover
receive quality
threshold
offsetand
forGBFD-510501
GBFD-113201
overlaid subcells
Concentric
in a concentric
celltoduring
the interference
NO
NO
Interval
Type
"RXQUALn"
(1 <=
n <= 12):II used
forand
non-AMR
FR calls.
When
handover
algorithm
is used
GBFD-510501
"INTERFEROFFSWITCHOL"
HUAWEI II Handover
is set to YES(Yes), the uplink
The receive quality
NO equals the
NO sum of theGBFD-51050
value of "RXQUALn"
HUAWEIand
II Hathe
Interval
corresponding
Type
quality offset
2 <= n <= 12

BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910

GBFD-113201Concentric Cell
SET GCELL Whether to usNO
NO
Enumeration
GBFD-510501HUAWEI II Handover
SET GCELL Whether to adj
NO
NO
GBFD-51050 HUAWEI II HaEnumeration
SET GCELL Triggering thr NO
NO
GBFD-51050 HUAWEI II HaInterval Type
SET GCELLHWhether
ena
NO
GBFD-51050 HUAWEI II HaEnumeration
When thistoparameter
is set NO
to YES:
SET GCELLHFor an MS with
NOlow receiveNO
GBFD-51050
HUAWEI
II HaEnumeration
level, the receive
level of the
neighboring
cell must be greater than or eq
According to the P/N rule,
the
conditions for edge handover are met in P of N measurement report
is setifNO
to
NO:
SET GCELLHWhen this parameter
NO
GBFD-51050 HUAWEI II HaInterval Type
This
parameter
number
P. for edge handover are met in P of N measurement report
According
to thespecifies
P/N rule,the
if the
conditions
SET GCELLH
NO
NO
GBFD-51050 HUAWEI II HaInterval Type
This parameter specifies the number N.
SET GCELLHWhether to adj
NO
NO
GBFD-51050 HUAWEI II HaEnumeration
SET GCELLHThe triggeringNO
NO
GBFD-51050 HUAWEI II HaInterval Type
SET GCELLHThe triggeringNO
NO
GBFD-51050 HUAWEI II HaInterval Type
SET GCELLHWhether to opNO
NO
GBFD-51050 HUAWEI II HaEnumeration
SET GCELLHWhether to per
NO
NO
GBFD-51050 HUAWEI II HaEnumeration
GBFD-110601HUAWEI I Handover
SET GCELL An emergencyNO
h
NO
Interval Type
GBFD-510501HUAWEI II Handover
SET GCELLHWhether the in
NO
NO
GBFD-51050 HUAWEI II HaEnumeration
GBFD-110601HUAWEI I Handover
SET GCELLHPeriod in whicNO
NO
Interval Type
GBFD-510501
Handover
GBFD-110601HUAWEI
HUAWEI II
I Handover
SET GCELLHAfter a load NO
NO
Interval Type
GBFD-510501
Handover
GBFD-110601HUAWEI
HUAWEI II
I Handover
SET GCELLHAfter a load NO
NO
Interval Type
GBFD-510501
Handover
GBFD-110601HUAWEI
HUAWEI II
I Handover
SET GCELLHWhether to ena
NO
NO
Enumeration
GBFD-510501
Handover
GBFD-110601HUAWEI
HUAWEI II
I Handover
SET GCELLHFor the purpos
NO
NO
Interval Type
GBFD-510501
Handover
GBFD-110601HUAWEI
HUAWEI II
I Handover
SET GCELLHWhen the netw
NO
NO
Interval Type
GBFD-510501HUAWEI II Handover
SET GCELLHInitial signal NO
NO
GBFD-11320 Concentric CeInterval Type
SET GCELLHLevel compens
NO
NO
GBFD-11320 Concentric CeEnumeration
SET GCELLHWhether to opNO
NO
GBFD-11320 Concentric CeEnumeration

GUI Value
Enumeration
Range
Number/Bit
Unit Actual Value Range
Default Value
Recommended
Initial
Value
Value SourceImpact
1~32
N/A
480ms
480~15360
4
4 Radio Planning
Cell
1~32
N/A
480ms
480~15360
6
6 Radio Planning
Cell
1~16
N/A
470ms; 480m480~7680(TC
1
1 Radio Planning
Cell
1~16
N/A
470ms; 480m480~7680(TC
1
1 Radio Planning
Cell
0~128
N/A
dB
0~128
72
72 Radio Planning
Cell
0~127
N/A
None
-64~63
64
64 Radio Planning
Cell
1~16
N/A
0.5s
0.5~8
2
2 Radio Planning
Cell
1~16
N/A
0.5s
0.5~8
3
3 Radio Planning
Cell
1~16
N/A
470ms; 480m480~7680(TC
1
1 Radio Planning
Cell
1~16
N/A
470ms; 480m480~7680(TC
1
1 Radio Planning
Cell
1~8
N/A
470ms; 480m480~3840(TC
1
1 Radio Planning
Cell
1~8
N/A
470ms; 480m480~3840(TC
1
1 Radio Planning
Cell

NO(No), YES(NO~0, YES~1None

NO, YES

0~100
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30

0~100
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30

N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A

None
dB
dB
dB
dB
dB
dB
dB
dB

NO(No)

NO(No)

100
0
0

0
0
10

0
0

0
0
-10

0
0

0
0

Default/Reco Cell

100 Radio Planning


Cell
Radio Planning
Cell
Default/Reco Cell
10 Default/Reco Cell
Radio Planning
Cell
Radio Planning
Cell
-10 Default/Reco Cell
Default/Reco Cell
Radio Planning
Cell

NO(No), YES(NO~0, YES~1None


NO, YES
NO(No)
NO(No)
Default/Reco Cell
NO(No), YES(NO~0, YES~1None
NO, YES
NO(No)
NO(No)
Default/Reco Cell
0~100
N/A
None
0~100
0
0
Radio Planning
Cell
NO(No), YES(NO~0, YES~1None
NO, YES
YES(Yes)
YES(Yes)
Radio Planning
Cell
NO(No), YES(NO~0, YES~1None
NO, YES
NO(No)
NO(No)
Default/Reco Cell
1~32
N/A
470ms; 480m480~15360(T
1
1 Radio Planning
Cell
1~32
N/A
470ms; 480m480~15360(T
1
1 Radio Planning
Cell
NO(No), YES(NO~0, YES~1None
NO, YES
NO(No)
NO(No)
Default/Reco Cell
1~16
N/A
470ms; 480m480~7680(TC
2
2 Radio Planning
Cell
1~16
N/A
470ms; 480m480~7680(TC
3
3 Radio Planning
Cell
NO(No), YES(NO~0, YES~1None
NO, YES
NO(No)
NO(No)
Default/Reco Cell
NO(No), YES(NO~0, YES~1None
NO, YES
NO(No)
NO(No)
Radio Planning
Cell
0~70
N/A
None
0~70
55
55 Radio Planning
Cell
NO(No), YES(NO~0, YES~1None
NO, YES
NO(No)
NO(No)
Default/Reco Cell
0~255
N/A
s
0~255
15
15 Radio Planning
Cell
0~255
N/A
s
0~255
10
10 Radio Planning
Cell
0~63
N/A
dB
0~63
63
63 Radio Planning
Cell
OFF(Off), ONOFF~0, ON~1None
OFF, ON
OFF(Off)
OFF(Off)
Engineering Cell
1~31
N/A
470ms; 480m480~14880(T
2
2 Radio Planning
Cell
1~31
N/A
470ms; 480m480~14880(T
2
2 Radio Planning
Cell
0~63
N/A
dB
0~63
63
63 Radio Planning
Cell
TCHMAXPOWER
TCHMAXPOW
None
TCHMAXPOW
ULBCCHPOWER
ULBCCHPOWER
Default/Reco Cell
NO(No), YES(NO~0, YES~1None
NO, YES
NO(No)
NO(No)
Default/Reco Cell

Parameter
Relationship
Service
Access
After
Interruption
Modification
Interruption
Scope Duration
Caution
Validation
Impact
of Modification
on Radio Network
Performance
This parameter
is
validInterrupted
only when [G2GNCELL:NCELLTYPE]
is set to(min)
HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If this parameter is set to a large
The
parameter
Read
will
be
&
WriteNo
set
with
(And
NULL
no
when
im
N/A
it
is
invalid.
N/A
None
The
parameter
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If
If this
this parameter
parameter is
is set
set to
to a
a smal
large
-Others:
The
parameter
Read
will
be
&
WriteNo
set
with
(And
NULL
no
when
im
N/A
it
is
invalid.
N/A
None
The
parameter
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If
this
parameter
is
set
to
a
If this parameter is set to a smal
large
-Others:
Read
& WriteNo
(And
no
imN/A
None
The parameter
The
will
be
set
with
NULL
when
it is invalid. N/A
This parameter
parameter
is valid
only
when
[G2GNCELL:NCELLTYPE]
is set to
HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If
this
parameter
is
set
to
a
smal
If
this
parameter
is
set
to
a
large
-Others:
Read
&
WriteNo
(And
no
im
N/A
N/A
None
The
parameter
The
parameter
will
be
set
with
NULL
when
it
is
invalid.
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If this parameter
is set to a smal
-Others:
The
parameter
Read
will be
& WriteNo
set with (And
NULLno
when
imN/A
it is invalid. N/A
None
The parameter
None
The parameter will be set with NULL when it is invalid.
-Others:
Read
& WriteNo
imN/A
None
The parameter
None
The
parameter
will be
set with (And
NULLno
when
it is invalid. N/A
-Others:
If this parameter is set to a large
-Others:
Read
& WriteNo
imN/A
None
The parameter
The parameter
will be
set with (And
NULLno
when
it is invalid. N/A
If
is
to a
If this
this parameter
parameter
is set
set
a smal
large
This
parameter
is valid
only if [GCELLHOBASIC:HOCTRLSWITCH]
is set to HOALGORITHM2(Handover
algorithm
II)toand
[GC
-Others:
Read
&
WriteNo
(And
no
im
N/A
N/A
None
The
parameter
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If
this
parameter
is
set
to
a
smal
If
this
parameter
is
set
to
a
large
This
parameter
is valid
only
if [GCELLHOBASIC:HOCTRLSWITCH]
is set to HOALGORITHM2(Handover
algorithm II) and [GC
Read
& WriteNo
(And
no
imN/A
None
The parameter
The parameter
will
be
set
with
NULL
when
it is invalid. N/A
This
parameter
is valid
only
when
[G2GNCELL:NCELLTYPE]
is set to
HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If this parameter
is set to a smal
-Others:
Read
& WriteNo
imN/A
None
The parameter
None
The
will
set
NULL
when
itit is
The parameter
parameter
will be
be
set with
with (And
NULLno
when
is invalid.
invalid. N/A
If this parameter is set to a large
-Others:
-Others:
Read
& WriteNo
imN/A
None
The parameter
The parameter
will be
set with (And
NULLno
when
it is invalid. N/A
If
is
to a
If this
this parameter
parameter
is set
set
a smal
large
This
parameter
is valid
only if [GCELLHOBASIC:HOCTRLSWITCH]
is set to HOALGORITHM2(Handover
algorithm
II)toand
[GC
-Others:
Read
& WriteNo
(And no imN/A
N/A
None
The parameter
If this parameter is set to a smal
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC

-Others:
This
parameter is
valid only if
[GCELLHOB
ASIC:INTRA
CELLHOEN]
is set to
YES(Yes),
[GCELLHOB
ASIC:HOCT Read & WriteNo (And no imN/A
RLSWITCH]
is set to
HOALGORI
THM2, and
[GCELLCH
MGAD:TCH
LOADOPTS
WITCH] is
set to
ON(On).

N/A

None

The parameter
If this parame

-Others:
Read & WriteNo (And no imN/A
N/A
None
The parameter
If this parame
-Others:
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II).
1. This parameter
Readis&valid
WriteNo
only if(And
[GCELLHOBASIC:HOCTRLSWITCH]
no imN/A
N/A
None
is set to HOALGORITHM2(Handover
The parameter
None
algorithm II) and [G
-Others:
2. This parameter
is
used
with
"RXQUALn"
to
determine
the
interference
handover
threshold.
Read & WriteNo (And no imN/A
N/A
None
N/A
The smaller th
This
parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2, [GCELLHOBASIC:INTERFHOE
-Others:
Read & WriteNo (And no imN/A
N/A
None
N/A
The smaller th
-Others:
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2, [GCELLHOBASIC:INTERFHOE
1. This parameter
Readis&valid
WriteNo
only if(And
[GCELLHOBASIC:HOCTRLSWITCH]
no imN/A
N/A
None
is set to HOALGORITHM2(Handover
The parameter
None
algorithm II) and [G
-Others:
2.
with if(And
"RXQUALn"
the interference
handover
threshold.
Readis
WriteNo
no imN/Ato determine
N/A
None
The
parameter
None
1. This
This parameter
parameter
is&used
valid
only
[GCELLHOBASIC:HOCTRLSWITCH]
is set
to HOALGORITHM2(Handover
algorithm II) and [G
-Others:
2. This parameter
is
used
with
"RXQUALn"
to
determine
the
interference
handover
threshold.
Read & WriteNo (And no imN/A
N/A
None
N/A
The smaller th
This
parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC
-Others:
Read & WriteNo (And no imN/A
N/A
None
N/A
The smaller th
-Others:
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC
1. This parameter
Readis&valid
WriteNo
only if(And
[GCELLHOBASIC:HOCTRLSWITCH]
no imN/A
N/A
None
is set to HOALGORITHM2(Handover
The parameter
None
algorithm II) and [G
2. This parameter is used with "RXQUALn" to determine the interference handover threshold.

-Others:
Read & WriteNo (And no imN/A
N/A
None
N/A
If this parame
This
parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] set to HOALGORITHM2 and [GCELLHOBASIC:INTERFHO
-Others:
Read & WriteNo (And no imN/A
N/A
None
The parameter
If this param
This
parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC
-Others:
Read & WriteNo
(And no imN/A
N/A
None
The parameter
If this parame
-Parameter
relationship
withifconditions:
This parameter
is valid only
[GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II).
Read
& WriteNo
(And
no imN/A
N/A
Noneis set to HOALGORITHM2.
The parameter
None
This parameter
is valid
only when
[GCELLHOBASIC:HOCTRLSWITCH]
-Others:
The parameter
will
be
set
with
NULL
when
it
is
invalid.
Read
& WriteNo
(And
no imN/A
N/A
Noneis set to HOALGORITHM2.
The parameter
If this parame
This parameter
parameter
is valid
valid
only ifwhen
[GCELLHOBASIC:HOCTRLSWITCH]
This
is
only
[GCELLHOBASIC:HOCTRLSWITCH]
is set to HOALGORITHM2.If this parameter is set to a large
The
parameter
Read
will
be
&
WriteNo
set
with
(And
NULL
no
when
im
N/A
it
is
invalid.
N/A
None
The
parameter
This parameter is valid only when [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2.
If
If this
this parameter
parameter is
is set
set to
to a
a smal
large
-Others:
The parameter
Read
will be
& WriteNo
set with (And
NULLno
when
imN/A
it is invalid. N/A
None
The parameter
If
this
parameter
is
set
to
a
smal
-Others:
-Others:
Read
& WriteNo
(And
no imN/A
N/A
Noneis set to HOALGORITHM2.
The parameter
If this parame
This parameter
parameter
is valid
valid
only ifwhen
[GCELLHOBASIC:HOCTRLSWITCH]
This
is
only
[GCELLHOBASIC:HOCTRLSWITCH]
is set to HOALGORITHM2(Handover
algorithm
II).
If this parameter is set to a large
The
Read
will
be
& WriteNo
set
with
(And
NULL
no
when
imN/A
it is invalid. N/A
Noneis set to HOALGORITHM2.
The parameter
This parameter
parameter
is valid
only
when
[GCELLHOBASIC:HOCTRLSWITCH]
If
If this
this parameter
parameter is
is set
set to
to a
a smal
large
-Others:
Read
& WriteNo
imN/A
None
The parameter
The parameter
will be
set with (And
NULLno
when
it is invalid. N/A
If
this
parameter
is
set
to
a
smal
-Others:
-Others:
Read
& WriteNo
(And
no imN/A
N/A
Noneis set to HOALGORITHM2.
The parameter
If this parame
This
parameter
is
valid
only
when
[GCELLHOBASIC:HOCTRLSWITCH]
This parameter is valid only if [GCELLHOBASIC:INTRACELLHOEN] is set to YES(Yes) and [GCELLHOBASIC:HOCTRLSWITC
The parameter
will be
set with (And
NULLno
when
it is invalid. N/A
Read
& WriteNo
imN/A
None
The parameter
None
-Others:
Read & WriteNo (And no imN/A
N/A
None
The parameter
If this parame
This
parameter is valid only if [GCELLHOBASIC:BQHOEN] is set to YES or [GCELLHOBASIC:HOCTRLSWITCH] is set to HOA
-Others:
Read
&
WriteNo
(And
no
im
N/A
N/A
None
The
parameter
If this parame
This
[GCELLHOFITPEN:HOCTRLSWITCH]
to HOALGORITHM2.
This parameter
parameter is
is valid
valid only
only when
if [GCELLHOBASIC:HOCTRLSWITCH]
is set is
toset
HOALGORITHM2(Handover
algorithm II) and [GC
The
will
be
set
with
NULL
when
it is invalid. N/A
Read
& WriteNo
(And
no
imN/A
None is set toThe
parameter
If this parame
This parameter
parameter
is valid
only
when
[GCELLHOFITPEN:HOCTRLSWITCH]
HOALGORITHM2.
If this parameter is set to a large
-Others:
The
will
be
set
with
NULL
when
it is invalid. N/A
Read
& WriteNo
(And
no
imN/A
None is set toThe
parameter
This parameter
parameter
is valid
only
when
[GCELLHOFITPEN:HOCTRLSWITCH]
HOALGORITHM2.
If
If this
this parameter
parameter is
is set
set to
to a
a smal
large
-Others:
The parameter
will be
set with (And
NULLno
when
it is invalid. N/A
Read
& WriteNo
imN/A
None
The parameter
If
this
parameter
is
set
to
a
smal
-Others:
Read
& WriteNo
(And
no imN/A
N/A
None is set toThe
parameter
If this param
This
parameter
is
valid
only
when
[GCELLHOFITPEN:HOCTRLSWITCH]
HOALGORITHM2.
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2 and [GCELLHOBASIC:LoadHo
The
parameter
will be
set
with
NULLno
when
it is invalid. N/A
Read
& WriteNo
(And
imN/A
None
The parameter
The value of
-Parameter
relationship
with
conditions:
-Others:
This
Read
is
& WriteNo
only
(And
[GCELLHOFITPEN:HOCTRLSWITCH]
no imN/A
N/A
None
is to
setHOALGORITHM2.
toThe
HOALGORITHM2.
parameter
None
This parameter
parameter
is valid
valid
only when
when
[GCELLHOIUO:HOCTRLSWITCH]
is set
The
parameter
will
be
set
with
NULL
when
it
is
invalid.
The
Read
will
be
& WriteNo
set
with
(And
NULL
no
when
imN/A
it is invalid.
N/A are met: None
The parameter
If this parame
This parameter
parameter
is valid
only
if all
of the
following
conditions
-Others:
1.
[GCELLPWRBASIC:PWRCTRLSW]
Read & WriteNo (And no im
isN/A
set to PWR3N/A
and [GCELLPWR3:PWRCTRLOPTIMIZEDEN]
None
The parameter
Setting this
is set to YES.
-Others:
2. [GCELLHOBASIC:HOCTRLSWITCH]
is
set
to
HOALGORITHM2.
Read & WriteNo (And no imN/A
N/A
None
The parameter
If this parame
This parameter is valid only if [GCELLHOBASIC:INTRACELLHOEN] is set to YES(Yes) and [GCELLHOBASIC:HOCTRLSWITC

Introduced in Version
Attribute
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio

BSC6910 V1 Radio

BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio

BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio

You might also like