Professional Documents
Culture Documents
Disclaimer
• We spared no efforts to make sure that the information in this manual is correct and
Electronics Ltd.
• Gembird Electronics makes no warranties for damages resulting from corrupted or lost
Thank you for buying the Gembird® wireless optical mouse! This manual will help you
install and use it properly.
MUSW is a RF wireless optical mouse set with USB interface with the following main
features:
o Receiver is the battery charger at the same time
o Reliable digital radio technology
o Operational range 1.5 meters
o Battery saving mode for longer battery life
Package contents
Please check the following package contents of your Wireless optical mouse:
o 1 x Wireless optical mouse
o 1 x Mouse stand (receiver) with AC-DC power adapter
o 2 x AAA NiMH rechargeable batteries
o 1 x CD-ROM with software driver for the programmable buttons
Wireless optical mouse
Receiver installation
CAUTION:
Windows 98 or higher or Macintosh OS 8.6 or higher
are required for the USB installation.
Receiver indicato rs
Your mouse can be setup to work with 2 different Radio frequency channels (optional) and
multiple security IDs. In this way you can have several wireless mice installed in the same
room without interference to each other. To change the channel and/or security ID follow
the steps below:
1. Press the Connect button on the receiver, Connect indicator will flash.
2. Press the Connect button at the bottom of the mouse.
Note:
1. The Connect LED will be lighted up when the connection is established.
2. You will have to follow the same connection procedure whenever you need to replace
batteries.
Wireless optical mouse
The mouse uses two AAA size Ni-MH rechargeable batteries. After installation of the fresh
batteries, it is recommended to charge them (place the mouse on the charging stand) for
15 hours to prolong their life. Please, make sure the Charge indicator is ON when you
charge the mouse.
If you feel the wireless mouse does not work smoothly, then the most probable reason is
that the batteries should be rechar ged. Please, put the mouse on the stand to charge them.
Normally it takes 12 hours to get the batteries fully charged.
NOTE: Some computers turn the power of the USB port off in the sleep mode. In this case
the battery won’t be charged. Therefore you would have to k eep your computer always ON
to charge the mouse.
Software Installation
The supplied driver lets you program the mouse buttons and works under Win95, Win98,
Win98/ SE, Win 2000 and Win XP. Please, insert the CD into the CD-ROM drive of your
computer. The driver will be installed automatically if the auto-run is enabled in your
computer, otherwise you can manually launch the installation by double clicking the file
Wireless optical mouse
“setup.exe” on the CD. Then follow the on-screen instructions to finish the setup.
A small mouse icon will appear in the Windows system tray after the installation.
Double-click on the icon to change the mouse settings.
Troubleshooting