Professional Documents
Culture Documents
WARNING
For safety reasons, this kit must be installed by an authorized BRP dealer.
This kit is designed for specific applicable models only (authorized BRP dealers will confirm
model(s)). It is not recommended for units other than the one (those) for which it was sold.
This instruction sheet MUST be given to the purchaser.
WARNING
Should removal of a locking device (e.g. lock tabs, self-locking fasteners, etc.) be required when
undergoing disassembly/assembly, always replace with a new one.
Torque wrench tightening specifications must strictly be adhered to.
Always wear EYE PROTECTION AND APPROPRIATE GLOVES when using power tools.
Unless otherwise specified, engine must be OFF when performing any operation on the vehicle.
Always be aware of parts that can move, such as wheels, transmission components, etc.
Some components may be HOT. Always wait for engine to cool down before performing work.
The following symbols may be used in this document:
Symbol
Description
WARNING
CAUTION:
NOTE:
FASTENER
SIZE
8.8 Grade
10.9 Grade
12.9 Grade
M4
1.5 2 Nm
(13 18 lbfin)
2.5 3 Nm
(22 27 lbfin)
3.5 4 Nm
(31 35 lbfin)
4 5 Nm
(35 44 lbfin)
M5
3 3.5 Nm
(27 31 lbfin)
4.5 5.5 Nm
(40 47 lbfin)
7 8.5 Nm
(62 75 lbfin)
8 10 Nm
(71 89 lbfin)
M6
6.5 8.5 Nm
(58 75 lbfin)
8 12 Nm
(71 106 lbfin)
10.5 15 Nm
(93 133 lbfin)
16 Nm (142 lbfin)
M8
15 Nm (11 lbfft)
40 Nm (30 lbfft)
M10
29 Nm (21 lbfft)
48 Nm (35 lbfft)
61 Nm (45 lbfft)
M12
52 Nm (38 lbfft)
85 Nm (63 lbfft)
M14
85 Nm (63 lbfft)
NOTE: The illustrations in this document show typical construction of the different assemblies and
may not reproduce the full detail or exact shape of the parts; however, they represent parts that have
the same or similar function.
NOTE: Installation time is approximately 0.1 hour (Without rear aluminium rack (P/N 715 000 242).
NOTE: Installation time is approximately 0.3 hour (With rear aluminium rack (P/N 715 000 242).
Printed in Canada. (vsi2008-025 en DL/DM)
Instruction
2007 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.
and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.
1/3
PARTS TO BE INSTALLED
PARTS TO BE INSTALLED
ITEM
P1
P2
P3
P/N
280 100 139
391 302 000
250 000 122
DESCRIPTION
Rear Bag
Flat Washer
M6 Screw
QTY
1
6
2
INSTRUCTIONS
Model(s): Renegade without rear aluminium
rack (P/N 715 000 242)
vsi2008-025-004_a
vsi2008-025-001_a
vsi2008-025-006_a
vsi2008-025-002_a
vsi2008-025-007_a
vsi2008-025-003_a
2/3
INSTRUCTIONS
vsi2008-025-010_a
vsi2008-025-011_a
Warning Label
This product come with the following warning
fabric label containing important information.
vsi2008-025-008_a
vsi2008-025-012_en
vsi2008-025-009_a
3/3