Professional Documents
Culture Documents
July 2012
Contents
Standards in numerical order
Index
2
472
Additions and changes, such as new amendments and Standards, revisions and withdrawals,
are given each month in Touchstone, our e-magazine, available to view online from
http://www.standards.co.nz/touchstone.
Standards New Zealand
Radio New Zealand House
155 The Terrace
NZ-Wellington 6001
Postal address:
Private Bag 2439
NZ-Wellington 6020
Tel.
Fax
E-mail
Web
+64 4 498 59 90
+64 4 498 59 94
enquiries@standards.co.nz
www.standards.co.nz
(Withdrawn)
(Withdrawn)
NZSR 11:1965
(Withdrawn)
Vehicles, boats and internal combustion engines - Radio disturbance characteristics Limits and methods of measurement for the protection of offboard receivers
To provide protection for broadcast receivers in the frequency range of 30 MHz to 1 000 MHz when used in the residential
environment. Compliance with this standard may not provide adequate protection for new types of radio transmissions or receivers
used in the residential environment nearer than 10 m to the vehicle, boat or device.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 56 pages
AS/NZS CISPR 12:2009
NZSR 12:1965
(Withdrawn)
Sound and television broadcast receivers and associated equipment - Radio disturbance
characteristics - Limits and methods of measurement
Specifies the generation of electromagnetic energy from sound and television receivers for the reception of broadcast and similar
transmissions and from associated equipment. The frequency range covered extends from 9 kHz to 400 GHz. Identical to, and
reproduced from, CISPR 13, Ed. 5.0 (2009).
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 48 pages
AS/NZS CISPR 13:2012
NZSR 13:1966
(Withdrawn)
NZSR 15:1965
(Withdrawn)
NZS/SMACNA 15d:1985
(Withdrawn)
Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Measuring apparatus
Specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages, currents and fields in
the frequency range 9 kHz to 18 GHz. Identical to and reproduced from CISPR 16-1-1:2005, including Amendment 1.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 76 pages
AS/NZS CISPR 16.1.1:2006
Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated
disturbances
Provides the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9
kHz to 18 GHz.
Joint Australian/New Zealand Standard
$178.40+GST (Members), $223.00+GST (Retail), 104 pages
Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for
30 MHz to 1000 MHz
Specifies the requirements for calibration test sites, used to perform antenna calibrations, as well as the test antenna characteristics,
calibration site verification procedure and site compliance criteria. Identical to and reproduced from CISPR 16-1-5:2003.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 44 pages
AS/NZS CISPR 16.1.5:2004
Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity - Conducted disturbance
measurements
Specifies the methods of measurement of disturbance phenomena in general in the frequency range 9 kHz to 18 GHz and especially
of conducted disturbance phenomena in the frequency range 9 kHz to 30 MHz. Identical to and reproduced from CISPR 16-21:2005.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 72 pages
AS/NZS CISPR 16.2.1:2006
Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity - Measurement of disturbance
power
Provides the methods of measurement of disturbance power using the absorbing clamp in the frequency range 30 MHz to 1 000
MHz. Identical to and reproduced from CISPR 16-2-2:2005.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 48 pages
Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity - Radiated disturbance
measurements
Specifies the methods of measurement of radiated disturbance phenomena in the frequency range 9 kHz to 18 GHz. Identical to
and reproduced from CISPR 16-2-3:2003.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 58 pages
AS/NZS CISPR 16.2.3:2004
Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity - Immunity measurements
Specifies the methods of measurement of immunity to EMC phenomena in the frequency range 9 kHz to 18 GHz. Identical to and
reproduced from CISPR 16-2-4:2003.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 18 pages
AS/NZS CISPR 16.2.4:2004
Specification for radio disturbance and immunity measuring apparatus and methods CISPR technical reports
Provides technical reports and information on the history of CISPR. Identical to and reproduced from CISPR 16.3:2003.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 186 pages
Specification for radio disturbance and immunity measuring apparatus and methods Uncertainties, statistics and limit modelling - Uncertainties in standardised EMC tests
Specifies guidance on the treatment of uncertainties to those who are involved in the development or modification of CISPR
electromagnetic compatibility (EMC) standards. Identical to and reproduced from CISPR 16-4-1:2005.
AS/NZS CISPR 16.4.1:2006
SAA/SNZ HB 18.2:2003
SANZ/SAA HB 18.7:1994
Guidelines for third-party certification and accreditation - Guide 7 Guidelines for drafting of
Standards suitable for use for conformity assessment
SANZ/SAA HB 18.16:1991
Guidelines for third-party certification and accreditation - Part 22: General criteria for
supplier's declaration of conformity
Specifies general criteria for a supplier's declaration of conformity in cases where it is desirable, or necessary, that conformity of a
product, process or service to normative documents be indicated, irrespective of the sector involved. The supplier may then declare
under his/her responsibility the conformity to normative documents. Identical with and reproduced from ISO/IEC Guide 22:1996.
Joint Australian/New Zealand Standard
SAA/SNZ HB 18.22:2003
SANZ/SAA HB 18.23:1991
SANZ/SAA HB 18.25:1991
SANZ/SAA HB 18.27:1991
Guidelines for third-party certification and accreditation - Guide 28 General rules for a
model third-party certification system for products
Identical to ISO/IEC Guide 28:1982.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
SANZ/SAA HB 18.28:1991
SANZ/SAA HB 18.39:1991
SANZ/SAA HB 18.40:1991
Guidelines for third-party certification and accreditation - Guide 42 Guidelines for a stepby-step approach to an international certification system
Identical to ISO/IEC Guide 42:1984.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
SANZ/SAA HB 18.42:1991
Guidelines for third-party certification and accreditation - Guide 44 General rules for ISO or
IEC international third-party certification schemes for products
Identical to ISO/IEC Guide 44:1985.
Joint Australian/New Zealand Standard
SANZ/SAA HB 18.44:1991
SANZ/SAA HB 18.53:1991
SANZ/SAA HB 18.54:1991
SANZ/SAA HB 18.57:1992
Guidelines for third-party certification and accreditation - Guide 58 Calibration and testing
laboratory accreditation systems - General requirements for operation and recognition
Sets out the general requirements for the operation of a system for accreditation of calibration and/or testing laboratories so that the
accreditations granted and the services covered by the accreditations may be recognized at national or international level as
competent and reliable. Identical to ISO/IEC Guide 58:1993.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 12 pages
SAA/SNZ HB 18.58:1993
Guidelines for third-party certification and accreditation - Guide 60 Code of good practice
for conformity assessment
Identical to ISO/IEC Guide 60:1994.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
SAA/SNZ HB 18.60:1995
SAA/SNZ HB18.61:1996
Pipe threads for tubes and fittings where pressure-tight joints are made on the threads
(metric dimensions)
Specifies a range of pipe threads from 1/16 to 6 for pressure-tight joints together with thread forms, dimensions and tolerances, and
designations. Includes appendices for recommended gauging systems and methods of use of gauges. Requirements are given for
jointing threads for taper external threads, taper or parallel internal threads and for long-screw threads for long-screws specified in
BS 1387.
Reprinted incorporating Amendment 6633
Adopted Standard
$192.00+GST (Members), $240.00+GST (Retail), 16 pages
Amendment 1, 1990 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 21:1985
Vehicles, boats and internal combustion engines - Radio disturbance characteristics Limits and methods of measurement for the protection of onboard receivers
Contains limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 2 500 MHz. The
standard applies to any electronic/electrical component intended for use in vehicles, trailers and devices. Identical to and
reproduced from IEC CISPR 25, Ed.3.0(2008) and its Corrigendum 1.
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 80 pages
AS/NZS CISPR 25:2010
MP 25:2002
This publication provides guidance on operating techniques, error detection and correction, and operator maintenance of equipment
for microfilming. Some explanatory material has been included to assist the operator's understanding of the basic theory behind the
laid-down procedures; however, this publication does not purport to deal exhaustively with micrographic technology. A table listing
some frequently encountered defects and their causes is shown in Appendix A.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 16 pages
NZS/ANSI Z26-1:1990
(Withdrawn)
(Withdrawn)
NZCP 28:1962
(Withdrawn)
(Withdrawn)
NZCP 47:1961
(Withdrawn)
NZCP 48:1963
(Withdrawn)
SAA/SNZ HB51:1993
(Withdrawn)
ANZ GOSIP Version 3 - 1993 Government Open Systems Interconnection Profile - ANZ
Overview
Provides an introduction to the Australian/New Zealand Government OSI Profile (GOSIP) Version 3. Includes information relating to
the objectives and structure of GOSIP as well as the GOSIP policy and the relationship between ANZ GOSIP 3 and other OSI
profiles.
The parts that comprise SAA/SNZ HB 55 and NZS 6623 come together in a 50 mm binder or can be purchased separately.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 42 pages
SAA/SNZ HB 55.4:1993
ANZ GOSIP Version 3 - 1993 Government Open Systems Interconnection Profile - ANZ
Implementation Planning Guidelines
Covers the business and technical issues relating to the implementation of GOSIP within existing non-OSI networks.
The parts that comprise SAA/SNZ HB 55 and NZS 6623 come together in a 50 mm binder or can be purchased separately.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 56 pages
SAA/SNZ HB 55.5:1993
SAA/SNZ HB 55.6:1993
ANZ GOSIP Version 3 - 1993 Government Open Systems Interconnection Profile - Network
Management Guidelines
Provides guidance to information technology planners and network managers implementing new networks in the areas of general
network management for data networks including OSI and SNMP, and presents overviews of the role of systems management as it
relates to network management with respect to emerging standards and architectures.
The parts that comprise SAA/SNZ HB 55 and NZS 6623 come together in a 50 mm binder or can be purchased separately.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 78 pages
SAA/SNZ HB 55.8:1995
ANZ GOSIP Version 3 - 1993 Government Open Systems Interconnection Profile - Security
Guidelines
Provides guidance on issues of security policy, system security, OSI security, existing network security, GOSIP security and
planning.
The parts that comprise SAA/SNZ HB 55 and NZS 6623 come together in a 50 mm binder or can be purchased separately.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 54 pages
SAA/SNZ HB 55.9:1995
(Withdrawn)
OSI - Vocabulary
SNZ/SAA MP62:1992
Defines the terms used in the OSI environment. Definitions have been culled from a number of ISO Standards in the OSI area
covering all layers of the basic reference model.
Adopted Standard
$56.80+GST (Members), $71.00+GST (Retail), 54 pages
SAA/SNZ HB 62.1:1995
(Withdrawn)
SAA/SNZ HB 62.2:1995
(Withdrawn)
SAA/SNZ HB 66(Int):2000
SAA/SNZ MP 72.93A:1993
(Withdrawn)
SAA/SNZ MP 72.94B:1994
(Withdrawn)
SAA/SNZ MP 72.95A:1995
(Withdrawn)
SAA/SNZ MP 72.95B:1995
(Withdrawn)
SAA/SNZ MP 72.96A:1996
(Withdrawn)
SAA/SNZ MP 72.97A:1997
(Withdrawn)
SAA/SNZ MP72.97B:1997
(Withdrawn)
SAA/SNZ MP 72.98A:1998
(Withdrawn)
NZS 73:1962
(Withdrawn)
Guide for the packing and transport of dangerous goods in transport units
This Handbook deals with sending dangerous goods in transport units for carriage by land and sea throughout New Zealand. It
concentrates on dangerous goods in packages, including small packages, dangerous goods in limited quantities, consumer
commodities and intermediate bulk containers (IBCs). The Handbook was revised in 2008 to keep it aligned with changes made to
NZS 5433:2007. Those changes were carried out to accommodate the revised Land Transport Rule, the UNRTDG latest update, a
review in line with latest practices and technologies, and an update to the Classification section. Other information sources drawn on
for the development of this Handbook have also been updated and that material has been addressed in the 2008 version.
$39.20+GST (Members), $49.00+GST (Retail), 43 pages
SAA/SNZ MP77:1999
(Withdrawn)
SAA/SNZ HB 78:1998
(Withdrawn)
(Withdrawn)
MP 87.1:2008
MP 87.2:2007
(Withdrawn)
(Withdrawn)
NZS/BSAU 110:1965
(Withdrawn)
NZS 127:1949
NZS/ISO 131:1979
(Withdrawn)
NZS 135:1962
(Withdrawn)
CSA B137.8:1977
SAA/SNZ HB 139(Int):1999
(Withdrawn)
IEC 155:1983
(Withdrawn)
NZS 159.1:1954
NZS 160:1968
(Withdrawn)
NZS 164:1959
(Withdrawn)
(Withdrawn)
NZS 177:1969
(Withdrawn)
NZS 198:1967
NZMP 200:1988
(Withdrawn)
NZMP 201:1990
(Withdrawn)
NZS 202:1966
(Withdrawn)
(Withdrawn)
HB 207.3:2005
NZS 211:1961
(Withdrawn)
NZS 212:1963
(Withdrawn)
(Withdrawn)
HB 219:2006
(Withdrawn)
(Withdrawn)
Guidance on the repair and overhaul of electrical equipment for explosive atmospheres
HB 239:2011
Provides guidance for the repair and overhaul of explosion-protected electrical equipment used in hazardous areas, as defined in
AS/NZS 60079.0. It covers equipment with a Group I designation for coal mining, Group II where flammable gases and vapours may
be present, and Group III which includes equipment used in the presence of combustible dusts. It gives details of the methods of
overhaul, repair, examination and the testing required to ensure safety and compliance with the relevant Standards for the different
equipment explosion-protection techniques. It covers the several types of explosion-protection techniques currently in use and
provides guidance for repair and overhaul service facilities.
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 200 pages
NZS 245:1962
(Withdrawn)
organizations will develop (or update current) processes to align with this new Handbook and implement risk management at all
levels within their sport or recreation structures.
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 104 pages
ISO/TR 19121 Geographic information - Imagery and gridded data
SAA/SNZ HB 255:2002
Reviews the manner by which geographic information users and the 19200 series of standards handle imagery and gridded data.
Presents a plan to address the imagery and gridded data in an integrated manner.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 35 pages
Metadata usage in Australian and New Zealand education and training
HB 256:2007
To provide information and practical guidance for the creation and management of online content in the learning, education, training,
educational administration and research environments.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 78 pages
Guide for managing risk in not-for-profit organizations
HB 266:2010
Facilitates the effective management of risk in independent not-for-profit (NFP), non-profit, and non-government organisations.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 62 pages
NZS/ISO 266:1975
(Withdrawn)
NZS/ISO 273:1979
(Withdrawn)
NZS 285:1959
NZS/ISO 286.1:1988
(Withdrawn)
NZS/ISO 286.2:1988
(Withdrawn)
NZS/BS 292.1:1982
(Withdrawn)
NZS/BS 292.2:1982
(Withdrawn)
(Withdrawn)
NZS/BS 302.2:1987
(Withdrawn)
NZS/BS 302.3:1987
(Withdrawn)
NZS/BS 302.4:1987
(Withdrawn)
NZS/BS 302.5:1987
(Withdrawn)
NZS/BS 302.6:1987
(Withdrawn)
NZS/BS 302.7:1989
(Withdrawn)
NZS/BS 302.8:1989
(Withdrawn)
NZS 325:1969
NZS/BS 328.2:1972
(Withdrawn)
NZS/BS 328.3:1983
(Withdrawn)
NZS/BS 328.4:1983
(Withdrawn)
NZS/BS 328.5:1983
(Withdrawn)
NZS/BS 328.6:1992
(Withdrawn)
NZS/BS 328.7:1992
(Withdrawn)
NZS/BS 328.8:1992
(Withdrawn)
NZS 354:1967
(Withdrawn)
IEC 357:1982
(Withdrawn)
NZS/ISO 362:1981
(Withdrawn)
NZS 366:1963
(Withdrawn)
NZS 376.1:1949
(Withdrawn)
NZS 380:1968
(Withdrawn)
IEC 383:1983
(Withdrawn)
NZS/ASTM D390:1986
(Withdrawn)
IEC 400:1987
(Withdrawn)
NZS 405.1:1959
(Withdrawn)
NZS/BS 410:1986
(Withdrawn)
IEC 416:1988
(Withdrawn)
(Withdrawn)
NZS/BS EN 471(Int):1994
NZS/BS 476.4:1970
(Withdrawn)
NZS/BS 476.8:1972
(Withdrawn)
Fire tests on building materials and structures - Method for determination of the fire
resistance of elements of construction (general principles)
General details of test conditions, specimens, apparatus and criteria for fire resistance testing. Appendices give general guidance
information, method for residual loadbearing capacity and operating instructions.
Adopted Standard
$312.00+GST (Members), $390.00+GST (Retail), 40 pages
NZS/BS 476.20:1987
Fire tests on building materials and structures - Methods for determination of the fire
resistance of loadbearing elements of construction
Detailed test requirements for beams, columns, floors and flat roofs and walls.
Adopted Standard
$192.00+GST (Members), $240.00+GST (Retail), 20 pages
NZS/BS 476.21:1987
NZS/BS 476.22:1987
Fire tests on building materials and structures - Methods for determination of the fire
resistance of non-loadbearing elements of construction
Detailed test requirements for partitions, fully insulated, partially insulated and uninsulated doorsets and shutter assemblies, ceiling
membranes and glazed elements.
Adopted Standard
$192.00+GST (Members), $240.00+GST (Retail), 24 pages
NZS 485:1969
(Withdrawn)
NZS 493:1950
(Withdrawn)
NZS 501.1:1957
(Withdrawn)
Gerber method for the determination of fat in milk and milk products - Methods
NZS 501.2:1971
For homogenized and sterilized milk; skim milk, separated milk, buttermilk and whey; cream (using cream and milk butyrometers);
dried milk; and cheese (using cheese and milk butyrometers). Specification for amyl alcohol. Identical to BS 696:Part 2:1969, with
national modifications.
Adopted Standard
$96.00+GST (Members), $120.00+GST (Retail), 28 pages
Amendment A, 1982 $33.60+GST (Members), $42.00+GST (Retail)
NZS/ANSI/NFPA 505:1996
(Withdrawn)
NZS 508:1966
(Withdrawn)
NZS 514:1948
(Withdrawn)
NZS 515:1948
(Withdrawn)
NZS 516:1948
(Withdrawn)
NZS 517:1948
(Withdrawn)
NZS 518:1948
(Withdrawn)
NZS 519:1966
(Withdrawn)
NZS 521:1952
(Withdrawn)
NZS/ISO 525:1986
(Withdrawn)
(Withdrawn)
Welding consumables -Technical delivery conditions for welding filler materials -Type of
product, dimensions, tolerances and markings
Provides requirements for the technical delivery conditions of welding filler materials for fusion welding. Identical to and reproduced
from ISO 544:2003.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
AS/NZS ISO 544:2005
NZS/ANSI/UL 558:1991
(Withdrawn)
NZS/ANSI/UL 583:1991
(Withdrawn)
NZS 584:1950
(Withdrawn)
NZS 588:1958
(Withdrawn)
NZS/ISO 606:1994
(Withdrawn)
NZS/IEC 617.2:1983
(Withdrawn)
NZS/IEC 617.3:1983
(Withdrawn)
NZS/IEC 617.4:1983
(Withdrawn)
NZS/IEC 617.5:1983
(Withdrawn)
NZS/IEC 617.6:1983
(Withdrawn)
NZS/IEC 617.7:1983
(Withdrawn)
NZS/IEC 617.8:1983
(Withdrawn)
NZS/IEC 617.9:1983
(Withdrawn)
NZS/IEC 617.10:1983
(Withdrawn)
NZS/IEC 617.11:1983
(Withdrawn)
NZS/IEC 617.12:1991
NZS/IEC 617.13:1993
NZS 623:1964
(Withdrawn)
NZS 623P:1984
NZS 625:1950
(Withdrawn)
NZS 632:1967
(Withdrawn)
NZS/API 650:1998
Covers material, design, fabrication, erection, and testing requirements for aboveground, vertical, cylindrical, closed- and open-top,
welded steel storage tanks in various sizes and capacities. Applies to tanks with internal pressures approximating atmospheric
pressure, but higher pressure is permitted when additional requirements are met. This standard applies only to tanks whose entire
bottoms are uniformly supported and in non-refrigerated service, with a maximum operating temperature of 90 degrees Celsius.
Adopted Standard
$1012.80+GST (Members), $1266.00+GST (Retail), 194 pages
NZS/ISO 668:1988
IEC 669.1:1981
(Withdrawn)
NZS 696.2:1966
(Withdrawn)
NZS 697:1960
(Withdrawn)
NZS 726:1968
(Superseded by BS 507:1985)
NZS 733:1966
NZS 734:1965
(Withdrawn)
NZS 743:1950
(Withdrawn)
NZS/BS 750:1984
NZS/IEC 751:1983
(Withdrawn)
NZS 755:1968
(Withdrawn)
(Withdrawn)
NZS 773:1967
(Withdrawn)
NZS/ISO 780:1985
(Withdrawn)
Specification for design and construction of ferrous piping installations for and in
connection with land boilers
For pipework connecting land steam boilers to prime movers or industrial plant, and for all ancillary steam and water services with
pipe fittings forming part of such installations. For pipes of any bore, where pressure exceeds 3.5 bar, and over 250 mm bore in
steam service at pressure up to and including 3.5 bar.
Adopted Standard
$512.00+GST (Members), $640.00+GST (Retail), 128 pages
Enquiry case 806/8, 1993
NZS/BS 806:1993
IEC 817:1984
(Withdrawn)
NZS/ISO 830:1981
NZS/IEC 833:1987
(Withdrawn)
(Withdrawn)
NZS 841:1964
(Withdrawn)
NZS 843:1951
(Withdrawn)
NZS 844:1951
(Withdrawn)
NZS/BS 853:1990
(Withdrawn)
NZS 878:1951
(Withdrawn)
NZS 899:1968
(Withdrawn)
NZS 902:1966
(Withdrawn)
NZS 904:1966
(Withdrawn)
NZS/BS EN 906:1996
(Withdrawn)
NZS 910:1965
(Withdrawn)
NZS 914:1951
(Withdrawn)
NZS/ISO 917:1989
(Withdrawn)
NZS 918:1965
(Withdrawn)
NZS/BS 969:1982
(Withdrawn)
Specification for wrought steels for mechanical and allied engineering purposes - General
inspection and testing procedures and specific requirements for carbon, carbon
manganese, alloy and stainless steels
Requirements for steelmaking and general testing procedures for the release of steel in the form of blooms, billets, slabs, bars, rods
and forgings used in the as-rolled, as-forged, annealed or normalized condition.
Adopted Standard
$312.00+GST (Members), $390.00+GST (Retail), 62 pages
Amendment 1, 1992 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 970.1:1991
NZS/BS 970.2:1988
(Withdrawn)
NZS/BS 970.3:1991
(Withdrawn)
NZS/BS 970.4:1970
(Withdrawn)
NZS 973:1965
(Withdrawn)
NZS 974:1951
(Withdrawn)
NZS 975:1966
(Withdrawn)
AS/NZS 999:1999
Information and documentation - Guidelines for the content, organization and presentation
of indexes
Provides guidelines for the content, organization and presentation of indexes. These apply to indexes of books, periodicals, reports,
patent documents and other written or printed documents, and also to non-print materials, such as electronic documents, films,
sound recordings, video recording, graphic material, maps and three-dimensional objects. This Standard is identical with and has
been reproduced from ISO 999:1996.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 47 pages
Railway rolling stock material - Rough-rolled tyres for tractive and trailing stock. Quality
requirements
Specifies requirements for the manufacture and supply of rough-rolled tyres for tractive and trailing stock of unalloyed steels.
Adopted Standard
$131.43+GST (Members), $164.29+GST (Retail), 17 pages
NZS/ISO 1005.1:1994
Railway rolling stock material - Tyres, wheel centres and tyred wheels for tractive and
trailing stock. Dimensional, balancing and assembly requirement
Specifies the dimensional requirements, surface roughness and, as appropriate, the permissible residual static unbalance for tyres,
wheel centres and tyred wheels in the various degrees of finish. Also the manufacturing requirements for tyred wheels.
Adopted Standard
$131.43+GST (Members), $164.29+GST (Retail), 17 pages
NZS/ISO 1005.2:1986
Railway rolling stock material - Axles for tractive and trailing stock. Quality requirements
NZS/ISO 1005.3:1982
Requirements for the manufacture and supply of axles for tractive and trailer stock of unalloyed and alloyed steels.
Adopted Standard
$94.29+GST (Members), $117.86+GST (Retail), 10 pages
Railway rolling stock material - Rod or forged wheel centres for tyred wheels for tractive
and trailing stock. Quality requirements
Specifies requirements for the manufacture and supply of rolled or forged wheel centres for tractive and trailing stock, which are
suitable for tyring and are made of unalloyed steels.
Adopted Standard
$94.29+GST (Members), $117.86+GST (Retail), 9 pages
NZS/ISO 1005.4:1986
Railway rolling stock material - Solid wheels for tractive and trailing stock. Technical
delivery conditions
Requirements for the manufacture and supply of rolled, forged or cast solid wheels for tractive and trailing stock of unalloyed steels.
Adopted Standard
$154.29+GST (Members), $192.86+GST (Retail), 21 pages
NZS/ISO 1005.6:1994
Railway rolling stock material - Wheelsets for tractive and trailing stock. Quality
requirements
Requirements for the assembly by press fitting or shrink fitting onto axles of solid wheels, wheel centres, wheel centres complete
with tyres, axle-mounted brake discs, dynamo pulleys, gear wheels, chain wheels and any other components specified by the
purchaser into complete wheelsets. Also specifies the dimensions and tolerances of the completed assembly and the conditions of
inspection and supply.
Adopted Standard
$122.86+GST (Members), $153.57+GST (Retail), 15 pages
NZS/ISO 1005.7:1982
NZS/BS 1006:1990
(Withdrawn)
NZS 1011:1964
(Withdrawn)
NZS 1013:1963
(Withdrawn)
AS/NZS 1015:2011
Establishes voluntary guidelines for the storage of non-current physical records. Storage refers to the records management function
of storing physical records, which are no longer in active use, for future retrieval and preservation. Within this context, this Standard
addresses issues relating to systems, processes, facilities, equipment and devices used for storing records that are no longer in
current use. This Standard covers all types of storage media, e.g. paper, audio visual material, micro-forms and machine readable
formats, but excludes electronic records on networks, hard-drives or in data centres.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
The control of undesirable static electricity
AS/NZS 1020:1995
Provides recommendations relating to safe control of electrostatic charges generated incidentally by processes or activities. Its
purpose is to assist in reducing fire, explosion and nuisance aspects associated with static electricity. It outlines conditions under
which the presence of static causes a hazard and recommends methods for its safe dissipation or mitigation. Appendices provide
information on the hazards caused by static electricity in the vicinity of flammable mixtures, and on minimum ignition energies for a
range of chemicals, and give examples of solving problems resulting from static electricity.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 80 pages
NZS 1021:1965
NZS 1023:1953
(Withdrawn)
NZS/AS 1023.1:1985
(Withdrawn)
NZS/AS 1023.2:1989
(Withdrawn)
Electric cables - Impregnated paper insulated - For working voltages up to and including
19/33 (36) kV
Specifies requirements for non-draining mass-impregnated paper insulated and lead alloy sheathed cables for working voltages up
to and including 19/33 (36) kV.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 47 pages
AS/NZS 1026:2004
NZS/AS 1029.1:1985
(Withdrawn)
NZS/AS 1029.2:1982
(Withdrawn)
NZS 1034:1953
(Withdrawn)
AS/NZS 1044:1995
Methods for the analysis of iron and steel - Sampling iron and steel for chemical analysis
AS/NZS 1050.1:1996
Describes methods for sampling and sample preparation for the determination of the chemical composition of pig iron, cast iron and
steel. Procedures are described for use with both liquid and solid metal.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 38 pages
Methods for the analysis of iron and steel - Determination of carbon content - Gravimetric
method
Specifies a gravimetric method for the determination of carbon content between 0.05 percent and 4.5 percent in all types of iron and
steel.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 1050.2:1994
Methods for the analysis of iron and steel - Determination of tin content - Flame atomic
absorption spectrometric method
Specifies a flame atomic absorption spectrometric method for the determination of tin content of iron and steel. The sample is
digested in acid, the tin extracted into trioctyl phosphine oxide in 4-methylpentan-2-one (MIBK) and then aspirated into a nitrous
oxide/acetylene flame of an atomic absorption spectrometer. The absorption is measured at 235.5 nm.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 1050.6:1995
Methods for the analysis of iron and steel - Determination of manganese content Spectrophotometric method
Specifies a spectrophotometric method for the determination of manganese content between 0.01 percent and 2 percent in all types
of iron and steel.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 1050.8:1994
Methods for the analysis of iron and steel - Determination of manganese in iron and steel Titrimetric method
This method sets out a titrimetric method, using the permanganate ion formed by oxidation, for the determination of the manganese
content of iron and steel. The method covers the range 0.50 percent to 15 percent manganese and is applicable to all grades of iron
and steel.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 1050.14:1994
Methods for the analysis of iron and steel - Determination of sulphur - Infrared absorption
method after combustion in an induction furnace
Specifies an infrared absorption method after combustion of the test portion at high temperature in a current of pure oxygen using a
high frequency induction furnace. The method can be used for the determination of sulphur content between 0.002 percent and 0.10
percent in steel. This standard is identical with and reproduced from ISO 4935:1989.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 1050.16:1994
Methods for the analysis of iron and steel - Determination of phosphorus Spectrophotometric method
Specifies a spectrophotometric method for the determination of the phosphorus content of iron and steel. The method is applicable to
the determination of phosphorus contents between 0.005 percent and 2.0 percent, provided that the following elements are not
present in amounts greater than that specified: niobium 1 percent, tantalum 1 percent, titanium 2 percent, tungsten 11 percent,
zirconium 1 percent.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 1050.18:1994
Methods for the analysis of iron and steel - Determination of magnesium content - Flame
atomic absorption spectrometric method
Specifies a flame atomic absorption spectrometric method for the determination of magnesium content between 0.010 percent and
0.25 percent in all types of iron and steel.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 1050.20:1994
Methods for the analysis of iron and steel - Determination of cobalt content Spectrophotometric method
Specifies a spectrophotometric method for the determination of cobalt content up to 12 percent in all grades of iron and steel
containing less than 10.0 percent copper. The sample is dissolved in acid and nitroso-R-salt added. This forms a red-brown
chromophore which is measured spectrophotometrically at 580 nm.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 1050.21:1994
AS/NZS 1050.24:1994
Methods for the analysis of iron and steel - Determination of aluminium content Spectrophotometric method
Specifies a spectrophotometric method for the determination of aluminium content in the range of 0.002 percent to 1.4 percent
aluminium in all types of iron and steel. The method uses a mercury cathode, followed by solvent extraction to separate interfering
elements, with alizarin red S to produce a chromogen which is measured at a wavelength of 490 nm.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
Methods for the analysis of iron and steel - Silicon in iron and steel - Spectrophotometric
method
Specifies a spectrophotometric method using reduced beta-silicomolybdate complex, for the determination of the total silicon content
of iron and steel. The method covers the range 0.005 percent to 5.0 percent silicon and is applicable to all grades of iron and steel.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 1050.26:1994
Methods for the analysis of iron and steel - Determination of titanium content Spectrophotometric method
Specifies a spectrophotometric method using diantipyryl-methane as a chromogen, measured spectrophotometrically at 390 nm. The
method can be used for the determination of titanium content between 0.005 percent and 1.20 percent in steel.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 1050.27:1994
Methods for the analysis of iron and steel - Vanadium in steel - Potentiometric method
AS/NZS 1050.28:1994
Specifies a potentiometric method for the determination of vanadium in both low and high alloy steels containing 0.003 percent to
2.00 percent vanadium.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Methods for the analysis of iron and steel - Determination of boron content - Curcumin
spectrophotometric method
Specifies a spectrophotometric method for the determination of boron content between 0.0005 percent and 0.01 percent in steel.
This standard is technically identical with and reproduced from ISO 10153:1991.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 10 pages
AS/NZS 1050.30:1994
Methods for the analysis of iron and steel - Determination of niobium content - PAR
spectrophotometric method
Specifies a PAR spectrometric method for the determination of niobium content between 0.005 percent and 1.3 percent in steel.
This standard is technically identical with and reproduced from ISO 9441:1988.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 1050.31:1994
Methods for the analysis of iron and steel - Determination of carbon content - Infrared
method
Specifies an infrared method for the determination of carbon in iron and steel after combustion in oxygen using high frequency
induction heating. The method is applicable to all types of iron and steel with carbon content in the range 0.002 percent to 4.5
percent carbon.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 1050.32:1994
Methods for the analysis of iron and steel - Determination of copper content - Flame atomic
absorption spectrometric method
Specifies a flame atomic absorption spectrometric method for the determination of copper content between 0.004 percent and 0.50
percent in steel. This standard is identical with and reproduced from ISO 4943:1985.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 1050.37:1994
AS/NZS 1050.38:1994
Methods for the analysis of iron and steel - Determination of vanadium content - Flame
atomic absorption spectrometric method
Specifies a flame atomic absorption spectrometric method for the determination of vanadium content between 0.005 percent and 1.0
percent in steel. This standard is identical with and reproduced from ISO 9647:1989.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
Methods for the analysis of iron and steel - Determination of chromium content - Flame
atomic absorption spectrometric method
Specifies a flame atomic absorption spectrometric method for the determination of chromium content between 0.002 percent and 2.0
percent in non-alloy and low alloy steel. The procedure involves dissolution of a test portion in acid and determination of the atomic
absorption of the chromium spectral line, measured at either 357.9 nm or 425.4 nm in a flame atomic absorption spectrometer. This
standard is identical with and reproduced from ISO 10138:1991.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 10 pages
AS/NZS 1050.39:1994
AS/NZS 1052.1:1995
AS/NZS 1052.2:1999
AS/NZS 1053:1999
NZSS 1055:1953
NZSS 1056:1952
(Withdrawn)
Storage water heaters - Daily energy consumption calculations for electric types
AS/NZS 1056.4:1997
Sets out a method for calculating the energy consumption of electric storage water heaters fitted with electric resistance heating
units. This Standard is not applicable to gas water heaters, solar water heaters, heat-exchangers or heat-pumps. The Standard is
based on known performance characteristics of electric storage water heaters under static conditions (i.e. standing heat losses with
no deliver) and using an energy delivery of 37.7 MJ per day (equivalent to a volume of 200 L of water raised in temperature by 45
degrees C).
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 29 pages
Stretchers for ambulance purposes
NZS 1057:1967
Applies to the manufacture of the following types of stretchers suitable for general ambulance work: Type 1, a wooden bearer
collapsible stretcher with fixed, sliding or folding handles, and Type 2, a tubular steel (or suitable metal alloy) frame fixed stretcher
with telescopic or fixed handles.
Reprinted to append Amendment 1:1978
$39.20+GST (Members), $49.00+GST (Retail), 16 pages
Amendment 1, 1978 $33.60+GST (Members), $42.00+GST (Retail)
Sunglasses and fashion spectacles
AS/NZS 1067:2003
Proposes a specification of physical properties for sunglasses and sunglass lenses of nominal plano power, and which are not
prescription lenses, intended for protection against solar radiation for general use, for social and domestic purposes, including road
use and driving.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 50 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
NZS 1069:1966
NZS/ISO 1074:1975
(Withdrawn)
NZS/AS 1100.301 Supplement 1:1986 Technical drawing - Architectural drawing - Architectural drawings
Gives typical drawings illustrating the use of conventions specified in the Standard. This Supplement should be read in conjunction
with the Standard.
Adopted Standard
$27.20+GST (Members), $34.00+GST (Retail), 6 pages
Technical drawing - Engineering survey and engineering survey design drawing
NZS/AS 1100.401:1984
Sets out recommendations for the preparation of survey plans for engineering works and the illustration of proposed, designed and
executed engineering works based on such survey plans. The first two sections, taken with Part 101 of NZS/AS 1100, provide a
common language for the interdisciplinary communications of information by means of engineering survey and engineering survey
design drawings. Section 3 provides symbols and abbreviations for use on special purpose drawings such as identification of details
for a specific utility.
Adopted Standard
$135.70+GST (Members), $169.63+GST (Retail), 57 pages
Amendment 1, 1984 $33.60+GST (Members), $42.00+GST (Retail)
NZS/AS 1100.401 Supplement 1:1984 (Withdrawn)
NZS/AS 1100.401 Supplement 2:1984 (Withdrawn)
NZS/AS 1100.401 Supplement 3:1984 (Withdrawn)
NZS/AS 1100.401 Supplement 4:1984 (Withdrawn)
Technical drawing - Structural engineering drawing
AS/NZS 1100.501:2002
Sets out requirements and recommendations for structural engineering drawings to obtain common practice for the representation of
structures and components, including reinforced and prestressed concrete, structural steel, timber and masonry. The methods form
a basis for more detained rules for specific applications. It adds to the requirements of AS 1100.101-1992 Technical drawing, Part
101: General principles.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 31 pages
NZS/AS 1100.501 Supplement 1:1986 (Superseded by AS/NZS 1100.501:2002)
NZS/AS 1101.3:1987
(Withdrawn)
AS/NZS 1102.104:1997
Provides symbols for basic passive components such as resistors, capacitors and inductors, ferrite cores, magnetic storage
matrices, piezoelectric crystals, electret and delay lines. Based on but not equivalent to and reproduced from IEC 60617-4:1996.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Graphical symbols for electrotechnical documentation - Semiconductors and electron
tubes
Provides symbols for semiconductor devices and electron tubes. This Standard is technically equivalent to and reproduced from IEC
60617-5:1996.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 49 pages
AS/NZS 1102.105:1997
AS/NZS 1102.112:1995
Graphical symbols for electrotechnical documentation - Binary logic elements
Provides symbols for logic functions and their usage. The symbols have been prepared with a view to electrical applications but may
also be applied to non-electrical systems. This standard is identical with and reproduced from IEC 60617-12:1991.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 170 pages
Graphical symbols for electrotechnical documentation - Analogue elements
AS/NZS 1102.113:1995
Provides symbols to represent functions and devices for operating and producing analogue quantities. This standard is identical with
and reproduced from IEC 60617-13:1993.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 31 pages
NZS/AS 1103.1:1973
NZS/AS 1103.3:1989
NZS/AS 1103.4:1992
NZS/AS 1103.5:1978
NZS/AS 1103.6:1981
NZS/AS 1103.7:1984
NZS/AS 1103.8:1986
NZS 1106:1954
(Withdrawn)
AS/NZS 1110:1995
(Withdrawn)
AS/NZS 1111:1996
(Withdrawn)
AS/NZS 1112:1996
(Withdrawn)
NZSS 1121:1953
(Withdrawn)
NZS 1123:1953
(Withdrawn)
NZS/BS 1123.1:1987
(Withdrawn)
NZS 1125:1953
(Withdrawn)
(Withdrawn)
NZS/AS 1128:1972
(Withdrawn)
Wool - Determination by the Airflow Method of the mean fibre diameter of core samples of
raw wool
Sets out a method for the determination of the mean fibre diameter of wool fibres sampled from bales of raw wool by coring, using
cutters of nominal diameter from 12mm to 25 mm. This standard is identical with and reproduced from IWTO-28-93.
Reprinted to append Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 38 pages
Amendment 1, 1997 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 1997 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 1998 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 1133:1996
Wool - Determination of wool base and vegetable matter base of core samples of raw wool
AS/NZS 1134:1999
Sets out the procedure to be used for determination of the wool base and vegetable matter base from which the commercial yields of
classed growers' lots, interiors, bulk classed lots and deliveries are calculated. Applicable to core samples only and covers all forms
of raw wool. This Standard is identical with and has been reproduced from IWTO-19-98.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 49 pages
NZS/AS 1136.1:1988
(Withdrawn)
BS 1142:1989
(Withdrawn)
NZS 1153.2:1972
(Withdrawn)
NZS 1153.3:1969
(Withdrawn)
NZS 1153.4:1965
(Withdrawn)
NZS/ISO 1155:1978
(Withdrawn)
NZS 1157:1969
(Withdrawn)
NZS/BS 1157:1975
(Withdrawn)
NZSS 1158:1965
(Withdrawn)
AS/NZS 1158.1.3:1997
Road lighting - Computer procedures for the calculation of light technical parameters for
Category V and Category P lighting
Specifies the computer-based design procedures applicable to Categories V and P lighting for the calculation of light technical
parameters (LTPs), as required, for the design or evaluation of road lighting in accordance with the requirements of AS/NZS
1158.1.1 and AS/NZS 1158.3.1. The source code of one computer program, designated SAA STAN, together with a shell program
designated STANSHELL, are given for the calculation of the LTPs for Category V lighting on straight sections of road. This source
code and shell program are available on a CD ROM provided in a pocket inside the back cover of this Standard.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 56 pages
Amendment 1, 2008 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 1158.2:2005
AS/NZS 1158.3.1:2005
AS/NZS 1158.4:2009
Specifies performance requirements for the lighting of uncontrolled pedestrian (zebra) crossings. The requirements may also be
applied to other forms of pedestrian crossings, e.g. signalised crossings, where the lighting of such crossings is specifically
designed.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 32 pages
Road lighting - Tunnels and underpasses
AS/NZS 1158.5:2007
Specifies performance and design requirements for lighting schemes for tunnels and underpasses. It also specifies the luminaire
data and other design data that is needed to facilitate the lighting design and the assessment of compliance with the requirements of
this Standard.
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 56 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
Road lighting - Luminaires
AS/NZS 1158.6:2010
Sets out the requirements for the design, construction, performance and testing of road lighting luminaires to ensure that they will be
suitable for the operating and environmental conditions to which they will be subjected in service. Road lighting luminaires must
withstand, and be capable of operating under, adverse conditions, including the effects of salt spray, industrially contaminated
atmospheres, fog, smoke, dust storms, snow, ultraviolet radiation, driving rain, wind and traffic-induced vibration.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 52 pages
NZS/AS 1161:1984
(Withdrawn)
NZS/ISO 1161:1984
Provides background material to the requirements of AS/NZS 1170.3, Snow and ice actions. Clause by clause, it gives the origins of
requirements, departures from previous practice and explanations with examples to illustrate their applications. Common problems
for design are also discussed.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 68 pages
Structural design actions - Earthquake actions - New Zealand
NZS 1170.5:2004
Provides procedures for the determination of earthquake actions on structures in New Zealand. It gives the requirements for
verification procedures, site hazard determination, the evaluation of structural characteristics, structural analysis for earthquake
action effects, the determination and limits for deformations and the seismic design of parts of structures. It is to be applied in
conjunction with AS/NZS 1170 parts 0, 1, 2 and 3. Appendices cover aspects of ultimate limit state design and the requirements for
material specific structural design standards that are able to be used in conjunction with NZS 1170.5.
$108.80+GST (Members), $136.00+GST (Retail), 80 pages
NZS 1170.5 Supplement 1:2004 Structural design actions - Earthquake actions - New Zealand Commentary
Provides background to the various provisions in NZS 1170.5:2004, suggests approaches that may satisfy the intent of the Standard
and, if appropriate, describes differences between this and previous editions of the Standard. References are provided for further
reading and these are given at the end of each section of the Commentary.
$108.80+GST (Members), $136.00+GST (Retail), 76 pages
NZS/AS 1178:1986
(Withdrawn)
NZS/ISO 1180:1983
(Withdrawn)
NZS 1185:1953
(Withdrawn)
NZS 1187:1969
(Withdrawn)
NZSS 1188:1954
Specifies dimensions and material requirements for conductor and enamel covering of rectangular aluminium winding wires intended
to be used for windings of electrical equipment.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
Winding wires - Test methods
AS/NZS 1194.5:1996
Specifies test methods for round and rectangular copper and aluminium winding wires in standards AS/NZS 1194 Parts 1 to 4, where
relevant.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 41 pages
BS 1196:1989
(Withdrawn)
Pressure equipment
AS/NZS 1200:2000
Sets out basic requirements and good practice for the design, materials, manufacture, examination, testing, installation, conformity
assessment, commissioning, operation, inspection, maintenance, repair, alteration and disposal of pressure equipment (boilers,
pressure vessels and pressure piping) but excluding gas cylinders. Includes detailed requirements for various pressure equipment by
direct reference to a range of Australian, New Zealand and other Standards.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 42 pages
NZS 1201:1970
(Withdrawn)
NZSS 1212:1966
NZS 1214:1969
NZS 1215:1969
(Withdrawn)
(Withdrawn)
NZS 1227.3:1966
(Withdrawn)
NZS 1229:1966
(Withdrawn)
(Withdrawn)
PVC-U pipes and fittings for stormwater and surface water applications
AS/NZS 1254:2010
Outlines minimum requirements for the manufacture and performance of PVC-U pipes and fittings for stormwater applications for use
by manufacturers, specifiers and purchasers of such products.
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$90.40+GST (Members), $113.00+GST (Retail), 44 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
NZS 1256:1955
(Withdrawn)
NZS 1257:1958
(Withdrawn)
PVC-U pipes and fittings for drain, waste and vent application
AS/NZS 1260:2009
Specifies requirements for PVC-U pipes and fittings for sewer, drain, waste and vent applications above ground or below ground and
is intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. The Standard includes
requirements for both plain and structured wall pipes and fittings. Pipes manufactured to this Standard should be used and installed
in accordance with AS/NZS 2032, AS/NZS 2566.1, AS/NZS 2566.2, AS/NZS 3500.2, AS/NZS 3500.5, WSA 02 and WSA 06.
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 64 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
NZS/AS 1264:1985
(Withdrawn)
(Withdrawn)
NZS/ISO 1275:1984
(Withdrawn)
AS/NZS 1276.1:1999
(Withdrawn)
(Withdrawn)
NZS 1300:1965
Methods of test for pulp and paper - Methods of test for pulp and paper Method 001s: Basic
density of pulpwood
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 8 pages
AS/NZS 1301.001s:2002
AS/NZS 1301.002s:2004
Methods of test for pulp and paper - Preparation of wood samples for chemical analysis
Methods of test for pulp and paper - Solubility of wood in boiling water
AS/NZS 1301.004s:2007
Sets out a method to be used to determine the proportion of material in wood which is soluble in boiling water.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
NZS/AS 1301.5s:1987
(Withdrawn)
Methods of test for pulp and paper - Halse lignin in wood and pulp
NZS/AS 1301.P6rp:1978
Describes the Halse procedure for determining the acid insoluble lignin in wood or pulp. The sample is treated with cold 38 percent
hydrochloric acid and cold concentrated sulphuric acid after first being treated to remove constituents which may interfere with the
lignin determination.
Adopted Standard
$27.20+GST (Members), $34.00+GST (Retail), 2 pages
Methods of test for pulp and paper - Determination of moisture in wood chips
AS/NZS 1301.010s:2007
Prescribes the oven-drying method for the determination of moisture content of wood chips. This revision has been made to remove
the distillation method for determination of moisture content.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 12 pages
NZS/AS 1301.P10rp:1986
Methods of test for pulp and paper - Klason lignin in wood and pulp
AS/NZS 1301.11s:2005
Allows an alternative filtration apparatus and removes references to the use of benzene as a solvent.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 12 pages
Methods of test for pulp and paper - Organic solvent extractives in wood, pulp and paper
AS/NZS 1301.012s:2003
This Standard prescribes the procedure to be used in determining organic solvent extractives in wood, pulp and paper.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 4 pages
Methods of test for pulp and paper - Sampling of wood chips for testing
AS/NZS 1301.013rp:2007
Provides guidelines and recommendations for the sampling of wood chips intended for the production of wood pulps.
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 16 pages
Methods of test for pulp and paper - Size classification of wood chips
AS/NZS 1301.014rp:2002
This standard describes the apparatus and procedure for size classification of wood chips intended for the production of wood pulps.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Methods of test for pulp and paper - Determination of moisture in pulp for calculation of
the delivered mass of a shipment
Details the procedure for the determination of the moisture content of baled sheet pulp irrespective of the quantity of moisture
present. The method is based on the "Rules" accepted by the British and Scandinavian Association.
Adopted Standard
$27.20+GST (Members), $34.00+GST (Retail), 8 pages
NZS/AS 1301.P200m:1977
(Superseded)
Methods of test for pulp and paper - Laboratory processing of pulp - Lampen mill method
NZS/AS 1301.P202s:1980
The Lampen mill is used as a laboratory beater for the processing of both hardwood and softwood pulps. This method sets out a
standard procedure for its use. Processing of the pulp in the mill is a preliminary step in the preparation of test sheets for testing the
physical properties of pulp.
Adopted Standard
$27.20+GST (Members), $34.00+GST (Retail), 3 pages
Methods of test for pulp and paper - Forming handsheets for physical testing of pulp
AS/NZS 1301.203s:2007
Prescribes the procedure to be used for making handsheets from samples of pulp for subsequent physical testing according to
AS/NZS 1301.208s.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Methods of test for pulp and paper - Estimation of dirt and shives in pulp
AS/NZS 1301.204rp:2006
Provides for the estimation of visible dirt and shives in both fully bleached and unbleached pulps including pulp from waste paper, in
sheet form. It is also suitable for mechanical pulp.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
Methods of test for pulp and paper - Freeness of pulp
AS/NZS 1301.206s:2002
To revise the method to include data which has recently become available on the use of freeness correction factors.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
Methods of test for pulp and paper - Determination of stock concentration
AS/NZS 1301.207s:2007
Specifies a method for determining the stock concentration of aqueous pulp suspensions. lt is used in laboratory procedures for the
determination of other pulp properties and is referred to in a range of other ISO Standards where pulp suspensions are involved.
Identical to and reproduced from ISO 4119:1995.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
Methods of test for pulp and paper - Physical testing of pulp handsheets
AS/NZS 1301.208s:2007
Prescribes the procedures to be used for the determination of certain physical properties of handsheets made from any kind of
papermaking pulp. For accurate and reproducible results the procedure for forming and conditioning the handsheets in AS/NZS
1301.203s is used.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 20 pages
Methods of test for pulp and paper - Laboratory processing of pulp - PFI mill method
AS/NZS 1301.209s:2003
This standard sets out a procedure for the use of the PFI mill. Information on care and maintenance of the mill is given in annex A.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 9 pages
Methods of test for pulp and paper - Alkali solubility of pulp
AS/NZS 1301.210s:2002
This standard is identical to and reproduced from ISO 692:1982.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 3 pages
AS/NZS 1301.214s:2007
Methods of test for pulp and paper - Equipment for preparation of handsheets
Describes the equipment used for the preparation of laboratory sheets of pulp for the purpose of carrying out subsequent physical
tests on these sheets to assess the relevant properties of the pulp itself.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 20 pages
Methods of test for pulp and paper - Removal of latency
AS/NZS 1301.215s:2007
Sets out a method for the removal of latency from all high yield pulps that have been produced at elevated temperature and cooled
before the concentration is reduced. The method involves disintegration at low consistency and elevated temperature followed by
rapid cooling to an even lower consistency. To ensure rapid cooling, the use of ice is recommended.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
Methods of test for pulp and paper - Tearing resistance of paper
AS/NZS 1301.400s:1998
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
Methods of test for pulp and paper - Statistical monitoring of test systems
AS/NZS 1301.402rp:2005
Clarifies the objectives and the procedures for monitoring and controlling either a single test system or two or more test systems
which are to be maintained in agreement with each other.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 12 pages
Methods of test for pulp and paper - Bursting strength of paper
AS/NZS 1301.403s:2006
Prescribes the procedure to be used for the determination of bursting strength of paper by means of a burst tester. It is applicable to
paper sheet materials which have a mean bursting strength less than 1100 kPa.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Methods of test for pulp and paper - Tensile strength of paper and board (constant rate of
loading method)
This Standard is identical with and has been reproduced from ISO 1924 - 1:1992.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 1301.404s:1998
Methods of test for pulp and paper - Grammage of non-creped paper and board
AS/NZS 1301.405s:2004
Identical to and reproduced from ISO 536:1995.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 4 pages
Methods of test for pulp and paper - Bending quality of paperboard
NZS/AS 1301.P406m:1986
Gives a measure of the bending quality of paperboards; the results obtained give an indication of the creasing requirements of a
paperboard during its conversion. The severity of creasing required to obtain a rupture-free fold is taken as a measure of bending
quality.
Adopted Standard
$27.20+GST (Members), $34.00+GST (Retail), 3 pages
Methods of test for pulp and paper - Ring crush test
AS/NZS 1301.407s:1997
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
Methods of test for pulp and paper - Water absorptiveness of paper and paperboard (Cobb
test)
Provides a method for those concerned with determining the water absorptiveness of sized paper and board, including corrugated
fibreboard, under standard.
Joint Australian/New Zealand Standard
AS/NZS 1301.411s:2004
Methods of test for pulp and paper - Sampling paper, board and pulp for testing
AS/NZS 1301.417s:1992
Specifies a method of obtaining a representative sample of a lot of paper, board or pulps for test purposes.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
Methods of test for pulp and paper - Ash content of wood, pulp, paper and board
AS/NZS 1301.418s:1994
Prescribes procedures for the determination of ash content of wood, pulp, paper and board. The revision includes a change to the
ashing temperature. There are optional temperatures for paper and board, and the selection of temperature will depend on the
purpose of the test. It is common practice to incorporate calcium carbonate into certain papers and boards. A temperature of 900
degrees C will decompose calcium carbonate to calcium oxide, a temperature of 520 degrees C will leave calcium carbonate
undecomposed. The user will choose one of these temperatures depending on which form of calcium is required in the residue. The
ashing temperature for wood and pulp is now 925 degrees C plus or minus 25 degrees C to bring it into line with the high
temperature ashing of paper.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
Methods of test for pulp and paper - Water vapour transmission rate of paper
AS/NZS 1301.419s:2004
Identical to and reproduced from ISO 2528:1995.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 11 pages
Methods of test for pulp and paper - Gurley air permeance of paper
AS/NZS 1301.420s:2006
Specifies the Gurley method of determining the air permeance of paper and board. It is applicable to papers and boards which have
air permeances between 0.1 m/(Pa.s) and 100 m/(Pa.s). Based on ISO 5636-5:2003 with national modifications.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 20 pages
Methods of test for pulp and paper - Determination of pH of aqueous extracts - Cold
extraction method
Specifies a method for the determination of the pH-value defined by the electrolytes extractable by cold water from a sample of
paper, board or pulp.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
AS/NZS 1301.421:2008
Methods of test for pulp and paper - Determination of the pH value of aqueous extracts of
paper, board and pulp - Hot extraction method
Method applies to an extract of the whole paper or board. Surface-treated papers or boards may yield quite a different pH for an
extract of the surface layer from that of the whole paper or board.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 12 pages
AS/NZS 1301.422s:2007
AS/NZS 1301.423:2008
Methods of test for pulp and paper - Folding strength of paper - Kohler-Molin method
Prescribes the procedure to be used to determine the folding strength of paper, measured as either folding endurance or the mean of
the number of double folds, using a Kohler-Molin folding strength tester.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 16 pages
Methods of test for pulp and paper - Determination of titanium dioxide in paper,
paperboard, pigments and fillers
Describes procedures for qualitative and quantitative determinations of titanium dioxide in paper, paperboard, pigments and fillers.
The method is not suitable for determination of total titanium because the solution procedure does not dissolve all titanium
compounds.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 12 pages
AS/NZS 1301.424s:2006
NZS/AS 1301.P425ts:1973
(Withdrawn)
Methods of test for pulp and paper - Determination of thickness and apparent bulk density
or apparent sheet density
Specifies two methods of measuring the thickness of paper and board and of calculating the apparent sheet density from the
thickness determinations. This Standard is based on ISO 534:1988 and incorporates amendments which provide that the ISO
preferred pressure between the faces be mandatory and allow the Standard to be applied to corrugated fibreboard.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 1301.426s:1994
NZS/AS 1301.427s:1988
AS/NZS 1301.436s:2005
Methods of test for pulp and paper - Measurement of diffuse reflectance factor
Specifies the equipment and describes the general procedure for measuring diffuse reflectance factor as required for the evaluation
of the physical correlates of specific appearance properties of pulp, paper and paperboard. Diffuse reflectance factor (R) is the ratio,
expressed as a percentage, of the radiant (luminous) flux reflected by a body within a specified cone, to that reflected by the perfect
reflecting diffuser under the same conditions of viewing and diffuse illumination.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
Methods of test for pulp and paper - Tensile strength of wetted paper and paperboard
AS/NZS 1301.437s:2007
Specifies methods for the determination of the wet strength of paper and paperboard by measuring its tensile strength after it has
been immersed in water for a specified period.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Methods of test for pulp and paper - Bursting strength of board
AS/NZS 1301.438s:1997
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 14 pages
Methods of test for pulp and paper - Bendtsen roughness of paper and paperboard
AS/NZS 1301.439s:2007
Specifies a method for the determination of the roughness of paper and board using the Bendtsen apparatus. Identical to ISO
8791.2:1990.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Methods of test for pulp and paper - Bendsten air permeance of paper and board
NZS/AS 1301.440s:1991
Sets out the procedure for measuring the air permeance of paper and board by means of the Bendsten air permeance tester.
Adopted Standard
$27.20+GST (Members), $34.00+GST (Retail), 7 pages
Methods of test for pulp and paper - Sheffield roughness of paper and board
AS/NZS 1301.441s:1998
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 13 pages
Methods of test for pulp and paper - Water absorption of solid fibreboard (total immersion)
AS/NZS 1301.442s:1998
This Standard is technically equivalent to and has been reproduced from ISO 5637:1989.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Methods of test for pulp and paper - Boiling water resistance of paperboard
AS/NZS 1301.443s:2005
Describes the procedure to be used when measuring the boiling water resistance of paperboard. It is applicable in particular to the
testing of plaster linerboard for use in the manufacture of plasterboard and is derived from the plasterboard manufacturing process.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
Methods of test for pulp and paper - Corrugated fibreboard - Determination of edgewise
crush resistance (Unwaxed edge method)
The objective of this Standard is to provide a method for those concerned with determining the edgewise crush resistance of
corrugated fibreboard. A modified adoption of ISO 3037:1994.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 3 pages
AS/NZS 1301.444s:2004
Methods of test for pulp and paper - Measurement of diffuse blue reflectance factor
(brightness) of pulp, paper and paperboard
Sets out a method to measure the diffuse blue reflectance factor (brightness) of pulp, paper and paperboard.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
AS/NZS 1301.446s:2005
Methods of test for pulp and paper - Sheffield air permeance of paper and board
AS/NZS 1301.447s:1998
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
Methods of test for pulp and paper - Tensile strength of paper and paperboard (constant
rate of elongation method)
Describes a method for measuring the tensile strength of paper at constant rate of elongation. The tensile force applied to the test
piece and its elongation are measured continuously during the test and the results are used to determine tensile energy absorption.
Stretch at break may also be determined if required.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 1301.448s:2007
Methods of test for pulp and paper - Description of crush testing equipment
AS/NZS 1301.449s:1997
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
Methods of test for pulp and paper - Compression strength of paper and board - Short
span test
Specifies a method for the determination of the compressive strength in the machine and cross directions of paper and board using a
short span compression tester. Identical to and reproduced from ISO 9895:1989.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 1301.450rp:2006
AS/NZS 1301.452rp:2006
Methods of test for pulp and paper - Bending resistance of paper and board - Constant rate
of deflection
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 1301.453s:1998
Methods of test for pulp and paper - Determination of opacity (paper backing) - Diffuse
reflectance method
Prescribes the method for determining the opacity (paper backing) of paper. Opacity (paper backing) is the property that governs the
extent to which one sheet of paper visually obscures printed matter on underlying sheets of paper.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
AS/NZS 1301.454s:2006
AS/NZS 1301.455s:1993
Methods of test for pulp and paper - Colour measurement with a diff/0 degrees geometry
tristimulus reflectometer
Specifies method for measuring colour of paper and board by diffuse reflectance method. Confined to non-fluorescent papers and
boards.
Technically equivalent to ISO/DP 5631.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Methods of test for pulp and paper - Determination of conductivity of aqueous extracts of
paper, board and pulps
Specifies a method for the determination of the conductivity of aqueous extracts of paper, board or pulp, these extracts having been
prepared by a hot or a cold method.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 13 pages
AS/NZS 1301.456s:2006
Methods of test for pulp and paper - Determination of moisture content in paper, board and
pulps
Applies to paper products and pulps that do not contain any appreciable quantity of material other than water which will escape from
the paper at the temperature specified for the test.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
AS/NZS 1301.457s:2006
Methods of test for pulp and paper - Glue bond strength of wetted corrugated fibreboard
AS/NZS 1301.458rp:2004
Provides a means of measuring the strength after wetting of the glue bonds of corrugated fibreboard.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 5 pages
Methods of test for pulp and paper - Zero-span wet tensile strength of pulp
AS/NZS 1301.459rp:2006
Provides a method to assess the tensile strength of pulp fibres while minimizing the impact of fibre network and fibre bonding
interactions upon the measurement. Based on ISO 15361:2000 with national modifications.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
Methods of test for pulp and paper - Statistical concepts used in pulp and paper testing
AS/NZS 1301.460s:2007
Provides procedures and concepts to be used in the calculation and interpretation of test results obtained by methods described in
other parts of AS/NZS 1301.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 32 pages
Methods of test for pulp and paper - Scuffing resistance of linerboard
AS/NZS 1301.461rp:2002
Sets out a method to determine the scuffing resistance of linerboard.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Methods of test for pulp and paper - Measurement of diffuse blue reflectance factor (ISO
brightness) of pulp, paper and paperboard
Specifies a method for measuring the diffuse blue reflectance factor (ISO brightness) of pulps, papers and boards. Is identical with
and has been reproduced from ISO 2470:1999.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 20 pages
AS/NZS 1301.462s:2005
Methods of test for pulp and paper - Equipment for measurement of diffuse reflectance
factor
Specifies the equipment for measuring the diffuse reflectance factor of pulp, paper and board and the procedures for calibrating that
equipment. Is identical with and has been reproduced from ISO 2469:1994.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
AS/NZS 1301.464s:2005
AS/NZS 1301.466s:2005
Methods of test for pulp and paper - Preparation of laboratory sheets for the measurement
of diffuse blue reflectance factor (ISO brightness)
Specifies two procedures for the preparation of laboratory sheets prior to measuring the diffuse blue reflectance factor (ISO
brightness). Is identical with and has been reproduced from ISO 3688:1999.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Methods of test for pulp and paper - Compression resistance of fibreboard boxes (cases)
AS/NZS 1301.800s:2006
Prescribes the apparatus and test procedure to be followed when assessing the compression resistance of unfilled fibreboard cases
in any desired direction. The testing of filled cases is prescribed in AS 2582.3 - 2003. In New Zealand the term case is used instead
of box.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 12 pages
NZS 1302:1962
Prestressing anchorages
AS/NZS 1314:2003
This Standard covers the design, manufacture and methods for testing prototypes of prestressing anchorages, for establishing
performance for use in prestressed concrete.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 23 pages
Safety signs for the occupational environment
NZS/AS 1319:1994
Provides for signs using a system of coded shapes and colours with symbols which pictorially describe hazards (i.e. signs for
conveying safety instructions without relying on any text message), and signs with text (words and numerals) messages (including
recommendations for multi-lingual signs); accident prevention tags are also covered. The signs are classified as regulatory; caution
(warning); emergency-related information (including fire signs). All standard symbolic (pictorial) signs are reproduced in colour and
examples are included, also in colour, of text-type signs. Photometric and colorimetric properties of the sign materials are dealt with,
and recommendations on styles and sizes of sign lettering are included.
Adopted Standard
$135.70+GST (Members), $169.63+GST (Retail), 40 pages
Glued laminated structural timber - Performance requirements and minimum production
requirements
Specifies product requirements for the timber used, the type of adhesive and the strength of the load in both end and lamination
joints. It also gives methods for establishing properties of completed structural pieces so that product may be assigned to a stress
grade. Methods of test are given to measure the strength of a glued joint.
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 40 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 1328.1:1998
Glued laminated structural timber - Guidelines for AS/NZS 1328: Part 1 for the selection,
production and installation of glued laminated structural timber
Intended for use in conjunction with AS/NZS 1328.1, this Standard provides detailed guidance for production of gluelam. A set of
stress grades is given for design purposes to simplify the use and installation of graded material. Guidelines are also provided for
quality control, third party certification and for establishing structural properties.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 23 pages
AS/NZS 1328.2:1998
NZS 1331:1962
(Withdrawn)
Additional guidance is provided for manufacturers and dispensers of prescription lenses on the requirements for production of
prescription personal eye protectors.
Reprinted to append Amendment 1:1997
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 36 pages
Amendment 1, 1997 $33.60+GST (Members), $42.00+GST (Retail)
Personal eye-protection - Eye and face protectors - Vocabulary
AS/NZS 1337.0(Int):2010
Provides terms and definitions for eye and face protectors. Additional terms specifically used in AS/NZS 1337.1 that are not defined
in this Interim Standard continue to be defined in AS/NZS 1337.1.
Interim Standard - Expires 26 May 2012
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 64 pages
Personal eye-protection - Eye and face protectors for occupational applications
AS/NZS 1337.1:2010
Specifies minimum requirements for non-prescription eye and face protectors and associated oculars designed to provide protection
for the eyes and faces of persons in industrial undertakings against common industrial hazards such as flying particles and
fragments, dusts, splashing materials and molten metals, harmful gases, vapours and aerosols.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$178.40+GST (Members), $223.00+GST (Retail), 108 pages
Amendment 1, 2012 $34.40+GST (Members), $43.00+GST (Retail)
Eye and face protection - Part 4: Filters and eye protectors against laser radiation (laser
eye-protectors)
Specifies performance requirements, test methods, marking requirements, selection and use of personal eye-protectors against laser
radiation in the spectral range 180 nm to 1000 micrometre. Identical to and reproduced from EN 207:2009.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 36 pages
AS/NZS 1337.4:2011
Eye and face protection - Part 5: Eye protectors for adjustment work on lasers and laser
systems (laser adjustment eye-protectors)
Specifies performance requirements, test methods, marking requirements, selection and use of laser adjustment filters and eyeprotectors against laser radiation in the spectral range 400 nm to 700 nm. Identical to and reproduced from EN 208:2009.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
AS/NZS 1337.5:2011
Personal eye protection - Part 6: Prescription eye protectors against low and medium
impact
Specifies minimum requirements for eye protectors fitted with prescription lenses intended to provide low or medium impact eye
protection from flying particles and fragments in occupational situations. It does not apply to eye protectors in which the prescription
lenses are fitted behind plano protective lenses.
Joint Australian/New Zealand Standard
$61.60+GST (Members), $77.00+GST (Retail), 20 pages
AS/NZS 1337.6:2012
Filters for eye protectors - Part 1: Filters for protection against radiation generated in
welding and allied operations
Specifies requirements for filters used in eye protectors intended to provide protection against radiation of high intensity emitted
during welding and allied operations. It specifies the shade numbers and the transmittance requirements of the filters and applies to
filters made of glass or other materials for absorption of radiation.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 32 pages
AS/NZS 1338.1:2012
Filters for eye protectors - Part 2: Filters for protection against ultraviolet radiation
AS/NZS 1338.2:2012
Specifies requirements for filters used in eye protection against ultraviolet radiation. It provides a system of designating code
numbers and shade numbers for filters and specifies the transmittance requirements for such filters.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 16 pages
Filters for eye protectors - Part 3: Filters for protection against infra-red radiation
AS/NZS 1338.3:2012
Specifies requirements for filters used in eye protection against infra-red radiation. It provides a system of designating code numbers
and shade numbers and specifies the transmittance requirements for such filters. Guidance on the selection of filters is given in
Appendix A.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
NZS 1340:1970
BS 1347:1986
(Withdrawn)
NZS/AS 1349:1986
(Withdrawn)
NZS 1353:1958
(Withdrawn)
Rotating electrical machines - General requirements - Three-phase cage induction motors High efficiency and minimum energy performance standards requirements
Applies to three-phase cage induction motors with ratings from 0.73 kW and up to but not including 185 kW. The scope covers
motors of rated voltages up to 1100 V a.c. It specifies the minimum efficiency values that a motor shall meet, and also the minimum
efficiency values that a motor shall meet in order to be designated high efficiency. Two methods of measurement are prescribed
(Method A and Method B) for determination of efficiency. Only one method need be applied.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 20 pages
AS/NZS 1359.5:2004
Rotating electrical machines - General requirements - Methods for determining losses and
efficiency - Three-phase cage induction motors
Specifies internationally aligned test methods for determining losses and efficiency of three-phase cage induction motors. This
Standard prescribes two test methods: Method 1, involving torque measurements applicable to motors of all kW ratings and Method
2, without torque measurements, applicable to motors of up to 200 kW rating.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 17 pages
AS/NZS 1359.102.3:2000
(Withdrawn)
(Withdrawn)
Coaxial cable and optical fibre systems or the RF distribution of analog and digital
television and sound signals in single and multiple dwelling installations
Provides specifications and requirements for the cabling of a range of premises and buildings generally referred to in this Standard
as dwellings, for distribution of analog and digital services such as free-to-air TV and sound, subscription or pay TV, or in-house
video systems via RF distribution. Such distributed services may include an interactive path.
Joint Australian/New Zealand Standard
$200.00+GST (Members), $250.00+GST (Retail), 160 pages
AS/NZS 1367:2007
Conversion factors
AS/NZS 1376:1996
Provides basic conversion information for use in converting from imperial and other non-SI units to the International System of Units
(SI).
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 29 pages
NZS 1379:1960
Textile floor coverings - Metric units and commercial tolerances for measurement
AS/NZS 1385:2007
Sets out the basic metric units and commercial tolerances for textile floor coverings.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 8 pages
Specification for screwed and socketed steel tubes and tubulars and for plain end steel
tubes suitable for welding or for screwing to BS 21 pipe threads
Applicable to tubes of nominal size DN8 to DN150 in light, medium and heavy thicknesses.
Reprinted incorporating Amendment 1
Adopted Standard
$192.00+GST (Members), $240.00+GST (Retail), 24 pages
Amendment 1, 1989 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 1387:1985
(Withdrawn)
NZS/BS 1400:1985
(Withdrawn)
Cranes, hoists and winches - Part 10: Mobile elevating work platforms
Addresses the requirements for mobile elevating work platforms (MEWPs) in general and, in addition, those intended for specific
applications such as use near live electrical conductors, or operation in orchards where specific design requirements are necessary
to address the risks associated with the intended use. Additional requirements are also specified for portable MEWPs.
Joint Australian/New Zealand Standard
$220.00+GST (Members), $275.00+GST (Retail), 176 pages
AS/NZS 1420:1996
(Superseded)
AS/NZS 1428.4.1:2009
Electric cables - Polymeric insulated - For working voltages 1.9/3.3 (3.6) kV up to and
including 19/33 (36) kV
Specifies the requirements for cross-linked polyethylene (XLPE) and ethylene propylene rubber (EPR) insulated, individually
screened single-core and three-core cables for fixed installations for electricity supply, with or without armour.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 44 pages
AS/NZS 1429.1:2006
Electric cables - Polymeric insulated - For working voltages above 19/33 (36) kV up to and
including 87/150 (170) kV
Specifies requirements for the construction and testing of single-core cross-linked polyethylene (XLPE) insulated cables for fixed
installations for electricity supply.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 36 pages
AS/NZS 1429.2:2009
NZS/AS 1431.1:1989
(Withdrawn)
NZS/AS 1431.2:1989
(Withdrawn)
NZS/AS 1431.7:1989
(Withdrawn)
NZS/BS 1435.1:1987
(Withdrawn)
NZS/ISO 1436:1991
(Withdrawn)
NZS/AS 1453:1973
(Withdrawn)
Methods of test for plastics pipes and fittings - Method for determining the dimensions of
pipes and fittings
Sets out a method for determining the dimensions of plastics pipes and fittings, i.e. outside diameter, wall thickness, length,
squareness of pipe ends, internal length, mouth diameter and root diameter of sockets.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 1462.1:2006
Methods of test for plastics pipes and fittings - Method for determining the flattening
properties of plastics pipes and fittings
Sets out a method for determining the flattening properties of plastics pipes and fittings.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 1462.2:2006
Methods of test for plastics pipes and fittings - Method for determining the impact
characteristics of pipes
Specifies a method for determining the impact characteristics of plastic pipes when subjected to multiple impacts at 20 degrees C or
0 degrees C, as appropriate.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 1462.3:1998
Methods of test for plastics pipes and fittings - Method for determining reversion of plastic
pipes
Sets out the method for determining the degree of residual extrusion stress in plastic pipes by immersion in a heat transfer medium
or exposure in a hot air oven. Temperatures of test, times of immersion/exposure and specifications for degree of residual stress
shall be as specified in the relevant product standard.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 9 pages
AS/NZS 1462.4:2002
Methods of test for plastics pipes and fittings - Vicat softening temperature
AS/NZS 1462.5:2002
Provides a method of test to determine the Vicat softening temperature of thermoplastics pipes and fittings. It is applicable to
thermoplastics materials for which it is possible to measure the temperature at which their rate of softening becomes rapid.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 5 pages
Methods of test for plastics pipes and fittings - Thermoplastics pipes, fittings and
assemblies for the transport of fluids under pressure - Resistance to internal pressure
Providesd requirements for the determination of the resistance to pressure of pipes, fittings or assemblies. Describes the method for
pressurising the different test pieces considered as well as the testing procedure and the test report.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
AS/NZS 1462.6:2008
Methods of test for plastics pipes and fittings - Method of testing the leaktightness of
assemblies
Specifies a method for testing the leaktightness of assemblies of plastics pipes and fittings with elastomeric sealing-ring socket joints
or inspection openings, which may be subjected to diametric distortion and /or angular deflection.
AS/NZS 1462.8:2008
AS/NZS 1462.10:1998
Methods of test for plastics pipes and fittings - Method 11: Method for high temperature
stress-relief testing of fittings
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 1462.11:1996
Methods of test for plastics pipes and fittings - Method for the determination of elastomeric
seal joint contact width and pressure
Sets out a procedure for determining the contact width and contact pressure profile of an elastomeric seal joint. It allows for both
spigot-mounted and socket-mounted elastomeric seal joints.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 1462.13:2006
Methods of test for plastics pipes and fittings - Method 14: Method for determination of the
light transmission of pipe
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 1462.14:1996
Methods of test for plastics pipes and fittings - Method 15: Method for determination of
vinyl chloride monomer content
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 1462.15:1996
Methods of test for plastics pipes and fittings - Method for high temperature testing of pipe
AS/NZS 1462.16:2006
Sets out the procedure for testing the matrix of PVC and ABS pipes by using high temperatures.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
Methods of test for plastics pipes and fittings - C-ring test for fracture toughness of PVC
pipes
Specifies a method for establishing the minimum fracture toughness of unplasticized (vinyl chloride) (PVC-U) pressure pipes.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 16 pages
AS/NZS 1462.19:2006
Methods of test for plastics pipes and fittings - Method 20: Method for determination of
long-term failure stress of PVC moulding compounds
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 1462.20:1996
Methods of test for plastics pipes and fittings - Method 21: Method for determination of
bond strength
This Method sets out a procedure for determining the bond strength between the inner and outer walls of hollow profile structured
wall pipe.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 1462.21:1997
AS/NZS 1462.22:1997
Methods of test for plastics pipes and fittings - Method 22: Method for determination of
pipe stiffness
This Method sets out a procedure for determining the pipe stiffness of plastics pipes with structured walls.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Methods of test for plastics pipes and fittings - Method for determination of ring flexibility
AS/NZS 1462.23:2006
Sets out a procedure for determining the ring flexibility of plastics pipes with structured walls.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
Methods of test for plastics pipes and fittings - Determination of slow-crack-growth of PE
(polyethylene) resins - Notched, constant ligament-stress (NCLS) method
Sets out a method to determine the susceptibility of polyethylene resins to slow-crack-growth under a constant ligament-stress in an
accelerating environment.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 8 pages
AS/NZS 1462.25:2005
Methods of test for plastics pipes and fittings - Method 26: Determination of weathering
resistance of plastics pipes for external storage
This Standard sets out a method for determining the weathering resistance, including resistance to ultraviolet radiation of plastics
pipes and fittings.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Amendment 1, 2003 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 1462.26:2003
Methods of test for plastics pipes and fittings - Method 27: Determination of toluene
extract of carbon black
This Standard sets out a method for determining the toluene extract of carbon black.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 1462.27:2003
Methods of test for plastics pipes and fittings - Method 28: Method for the assessment of
the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and
compounds
This Standard describes a method with two procedures for the assessment of pigment or carbon black particle and agglomerate size
and degree of dispersion in polyolefin pipes, fittings and compounds. The method is applicable to polyolefin pipes and fittings, as well
as raw material in pellet form, with the choice of procedure to be determined by the referring specification. The method is applicable
to carbon black pigmented polyolefin pipes, fittings and compounds with a carbon black content of less than 3%. Identical to and
reproduced from ISO 18553:2002.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 9 pages
AS/NZS 1462.28:2003
Methods of test for plastics pipes and fittings - Plastics piping and ducting systems Determination of the long-term hydrostatic strength of thermoplastics materials in pipe
form by extrapolation
Sets out a method for estimating the long-term hydrostatic strength of thermoplastics materials by statistical extrapolation. Based on
ISO 9080:2003 with national modifications.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 36 pages
AS/NZS 1462.29:2006
AS/NZS 1486:1993
Information technology - Programming languages - Fortran 90
Specifies the form and establishes the interpretation of programs in the Fortran language and consists of the specification of the
language. This standard is identical with and reproduced from ISO/IEC 1539:1991.
Joint Australian/New Zealand Standard
$200.00+GST (Members), $250.00+GST (Retail), 369 pages
NZS/ASTM F1487(Int):2001
NZS/ISO 1496.2:1988
NZS/ISO 1496.5:1977
NZS/ISO 1496.6C:1977
NZS 1499:1965
(Withdrawn)
NZS/BS 1502:1982
(Withdrawn)
NZS/BS 1503:1989
(Withdrawn)
NZS/BS 1504:1976
(Withdrawn)
Methods for fire tests on building materials, components and structures - Test for
flammability of materials
Describes procedures for preparing and determining flammability index of thin sheet or woven materials of pliable nature which are
combustible and do not melt readily or shrink away from an igniting flame. The index is determined according to a speed factor, heat
factor and spread factor.
Reprinted to incorporate Amendment 1:1993
Adopted Standard
$43.53+GST (Members), $54.41+GST (Retail), 12 pages
Amendment 1, 1993 $33.60+GST (Members), $42.00+GST (Retail)
NZS/AS 1530.2:1993
Methods for fire tests on building materials, components and structures - Simultaneous
determination of ignitability, flame propagation, heat release and smoke release
Describes a single test method for grading building materials on the basis of ignition tendency, flame spread, heat development and
tendency to produce smoke. Apparatus, test procedure, indices for grading and mounting procedures for specimen materials are
provided.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 30 pages
AS/NZS 1530.3:1999
NZS/AS 1530.4:1990
(Withdrawn)
Methods for fire tests on building materials, components and structures - Smoke control
door and shutter assemblies - Ambient and medium temperature leakage test procedure
Sets out test procedures for a method of test for determining the smoke leakage through doors and shutters. This Standard is based
on but not equivalent to ISO/CD 5925-1.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
AS/NZS 1530.7:1998
(Withdrawn)
AS/NZS 1546.1:2008
On-site domestic wastewater treatment units - Septic tanks
Covers the manufacture of septic tanks and their associated fittings for the treatment of domestic wastewater only.
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 73 pages
On-site domestic wastewater treatment units - Waterless composting toilets
AS/NZS 1546.2:2008
Covers the requirements of waterless composting toilets which are intended primarily as stand-alone units for residential use but
may be suitable for non-residential applications.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 51 pages
On-site domestic wastewater treatment units - Aerated wastewater treatment systems
AS/NZS 1546.3:2008
Sets out performance requirements, design requirements, means of compliance, and specifications for testing aerated wastewater
treatment systems (AWTS) and associated fittings. Also provides guidance on installation, operation, and maintenance
requirements.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 31 pages
On-site domestic wastewater management
AS/NZS 1547:2012
Provides the requirements for treatment units and their land application systems to achieve sustainable and effective on-site
domestic wastewater management, and to protect public health and the environment. It sets out the performance objectives,
requirements, and the criteria, together with the means of not only complying with these criteria but of continually improving the
techniques employed by all stakeholders. It covers on-site systems including primary, secondary, and disinfection wastewater
systems, originating from household or personal activities. Activities include water closets, urinals, kitchens, bathrooms (including
showers, washbasins, baths, spa baths but not spa pools or hot tubs) and laundries. The systems covered in this Standard are
normally designed for domestic wastewater flows up to 14 000 L/week, from a population equivalent of up to 10 persons.
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 214 pages
AS/NZS 1553.1:1995
AS/NZS 1553.2:1999
AS/NZS 1553.3:1996
Structural steel welding - Part 6: Welding stainless steels for structural purposes
AS/NZS 1554.6:2012
Specifies requirements for the welding of stainless steel structures made up of combinations of stainless steel plate, sheet, sections,
including hollow sections and built-up sections, or castings and forgings.
Joint Australian/New Zealand Standard
$188.00+GST (Members), $235.00+GST (Retail), 124 pages
Structural steel welding - Welding of sheet steel structures
AS/NZS 1554.7:2006
Provides requirements for the arc welding of steel structures made up of combinations of steel plate, sheet or sections, including
pipe, hollow sections and built-up sections (collectively referred to herein as sheet steels) up to 4.8 mm in thickness.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 96 pages
Hot-dip galvanized steel bolts with associated nuts and washers for tower construction
AS/NZS 1559:1997
Specifies dimensional material and marking requirements for single nut and double nut hot-dip galvanized steel bolts with associated
nuts and washers for tower construction with ISO metric coarse pitch series threads in diameters from 12 mm to 30 mm inclusive
and lengths up to 160 mm for single nut bolts, 125 mm for double nut bolts and from 180 mm to 270 mm for step bolts. Clamping
lengths are tabulated in an appendix and equations for the determination of the clamping lengths are given.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
NZS/BS 1560.3.3.1:1989
NZS/BS 1560.3.3.2:1989
Design and installation of sheet roof and wall cladding - Corrugated fibre-reinforced
cement
Sets out requirements for the materials, design and installation of corrugated fibre-reinforced cement roof and wall cladding. It also
provides test procedures for the determination of resistance to wind force. An appendix gives advice on the provision of roof
ventilation.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
AS/NZS 1562.2:1999
(Withdrawn)
NZS/BS 1571.2:1975
(Withdrawn)
Specifies performance requirements for prefabricated and tube-and-coupler scaffolding. It is to be read in conjunction with AS/NZS
1576.1.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 22 pages
Scaffolding - Suspended scaffolding
NZS/AS 1576.4:1991
Specifies requirements for materials, design, erection and dismantling of suspended scaffolds including the supporting structure.
Adopted Standard
$57.37+GST (Members), $71.71+GST (Retail), 11 pages
Amendment 1, 1992 $33.60+GST (Members), $42.00+GST (Retail)
Scaffolding - Prefabricated splitheads and trestles
AS/NZS 1576.5:1995
Specifies requirements for splitheads and trestles that are used as supports for temporary platforms. Trestle ladders, which are
outside the scope of this Standard, are covered by AS 1892.1 and AS 1892.2.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 14 pages
Scaffolding - Metal tube-and-coupler scaffolding - Deemed to comply with AS/NZS 1576.3
AS/NZS 1576.6:2000
Specifies requirements for unsheeted metal tube-and-coupler scaffolding that does not exceed 33 m in height and is deemed to
comply with the performance requirements of AS/NZS 1576.3 for light, medium and heavy duty loads. The Standard does not apply
to prefabricated (modular) scaffolds and scaffolding installations that require specific engineering design to establish the strength of
any part of the scaffold or the adequacy of the supporting structure.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
AS/NZS 1580.0:1996
(Withdrawn)
Methods of test for paints and related materials - Conditions of test - Temperature,
humidity and airflow control
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 1580.101.1:1999
NZS/AS 1580.101.3:1992
(Withdrawn)
Methods of test for paints and related materials - Conditions of test - Temperature control
AS/NZS 1580.101.4:1999
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 1 page
Methods of test for paints and related materials - Conditions of test - Temperature and
humidity control
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 1580.101.5:1999
NZS/AS 1580.102.1:1992
(Withdrawn)
(Withdrawn)
NZS/AS 1580.105.2:1993
(Withdrawn)
Methods of test for paints and related materials - Preparation of timber test panels for
outdoor weathering test
Provides a procedure for preparing timber test panels for the outdoor weathering test of AS/NZS 1580.457.1.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 1 page
AS/NZS 1580.106.1:1995
NZS/AS 1580.107.1:1992
(Withdrawn)
Methods of test for paints and related materials - Determination of wet film thickness from
wet film mass
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 1580.107.2:1995
Methods of test for paints and related materials - Determination of wet film thickness by
gauge
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 1580.107.3:1997
Methods of test for paints and related materials - Application of paint at a nominated
spreading rate by determination of wet film mass (brush application)
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 1580.107.8:1995
Methods of test for paints and related materials - Determination of dry film thickness on
metallic substrates - Non destructive methods
Specifies non-destructive test methods for determining the dry film thickness on metallic substrates using magnetic torsion pull-off
instruments, magnetic induction instruments and eddy current instruments.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 1580.108.1:1994
NZS/AS 1580.108.2:1993
(Withdrawn)
NZS/AS 1580.203.1:1993
(Withdrawn)
AS/NZS 1580.205.2:1997
Methods of test for paints and related materials - Application properties - Roller coating
AS/NZS 1580.205.3:1997
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Methods of test for paints and related materials - Application properties - Airless spraying
AS/NZS 1580.205.4:1998
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Methods of test for paints and related materials - Thinner compatibility
AS/NZS 1580.208.1:1999
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
Methods of test for paints and related materials - Degree of settling
AS/NZS 1580.211.1:1995
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
Methods of test for paints and related materials - Ease of manual re-incorporation
AS/NZS 1580.211.2:1995
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
NZS/AS 1580.212.2:1981
(Withdrawn)
Methods of test for paints and related materials - Relative dry hiding power
AS/NZS 1580.213.1:1997
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
NZS/AS 1580.213.2:1992
(Withdrawn)
Methods of test for paints and related materials - Rheological properties - Guide to test
methods
Provides guidance on the suitability of methods in the AS/NZS 1580.214 series of tests for the determination of consistency and
viscosity of paints and related materials.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 1580.214.0:1996
Methods of test for paints and related materials - Consistency - Stormer viscometer
AS/NZS 1580.214.1:1997
Joint Australian/New Zealand Standard
(Withdrawn)
(Withdrawn)
NZS/AS 1580.301.2:1990
(Withdrawn)
NZS/AS 1580.302.1:1993
(Withdrawn)
Methods of test for paints and related materials - Surface dry condition
AS/NZS 1580.401.1:1999
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
NZS/AS 1580.401.3:1990
(Withdrawn)
NZS/AS 1580.401.5:1993
(Withdrawn)
NZS/AS 1580.401.6:1992
(Withdrawn)
Methods of test for paints and related materials - No-pick-up time of road marking paints
AS/NZS 1580.401.8:1997
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
NZS/AS 1580.402.1:1992
(Withdrawn)
AS/NZS 1580.403.2:1994
Methods of test for paints and related materials - Abrasion resistance - Taber abraser
Specifies a method for determining the abrasion resistance to coatings using Taber abraser equipment.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
Methods of test for paints and related materials - Recoating properties
AS/NZS 1580.404.1:1997
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Methods of test for paints and related materials - Determination of pencil hardness of paint
film
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 1580.405.1:1996
NZS/AS 1580.406.1:1993
(Withdrawn)
NZS/AS 1580.407.1:1993
(Withdrawn)
NZS/AS 1580.407.2:1993
(Withdrawn)
NZS/AS 1580.408.1:1984
(Withdrawn)
NZS/AS 1580.408.2:1993
(Withdrawn)
NZS/AS 1580.408.4:1993
(Withdrawn)
Methods of test for paints and related materials - Adhesion - Pull-off test
AS/NZS 1580.408.5:1994
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS/AS 1580.409.1:1992
(Withdrawn)
NZS/AS 1580.409.2:1992
(Withdrawn)
NZS/AS 1580.409.3:1992
(Withdrawn)
NZS/AS 1580.452.1:1992
(Withdrawn)
NZS/AS 1580.452.2:1992
(Withdrawn)
NZS/AS 1580.453.1:1992
(Withdrawn)
NZS/AS 1580.454.1:1992
(Withdrawn)
Methods of test for paints and related materials - Resistance to water at room temperature
AS/NZS 1580.455.1:1997
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS/AS 1580.456.1:1993
(Withdrawn)
Methods of test for paints and related materials - Resistance to natural weathering
AS/NZS 1580.457.1:1996
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 13 pages
Methods of test for paints and related materials - Resistance to washing
AS/NZS 1580.459.1:2000
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 5 pages
NZS/AS 1580.460.2:1982
(Withdrawn)
Methods of test for paints and related materials - Determination of resistance to yellowing
(dark chamber)
Specifies procedures for assessing the yellowing characteristics of white and pale coloured paints.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 1580.461.1:1995
NZS/AS 1580.481.0:1991
(Withdrawn)
NZS/AS 1580.481.1.1:1991
(Withdrawn)
Methods of test for paints and related materials - Exposed to weathering - Discolouration
(including bronzing)
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 1580.481.1.2:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of dirt
collection
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 1580.481.1.3:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of
retention (after washing)
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 1580.481.1.4:1998
Methods of test for paints and related materials - Exposed to weathering - Change in gloss
AS/NZS 1580.481.1.5:1999
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
Methods of test for paints and related materials - Exposed to weathering - Degree of
erosion
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 1580.481.1.6:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of
checking
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 1580.481.1.7:1998
AS/NZS 1580.481.1.8:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of
cracking
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Methods of test for paints and related materials - Exposed to weathering - Degree of
blistering
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 1580.481.1.9:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of flaking
and peeling
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 1580.481.1.10:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of
chalking
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 1580.481.1.11:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of colour
change
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 1580.481.1.12:1998
Methods of test for paints and related materials - Exposed to weathering - Degree of fungal
or algal growth
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 1580.481.1.13:1998
NZS/AS 1580.481.3:1992
(Withdrawn)
NZS/AS 1580.481.4:1975
(Withdrawn)
NZS/AS 1580.481.5:1993
(Withdrawn)
Methods of test for paints and related materials - Determination of fastness to light of
interior paint
Provides a procedure for assessing the light-fastness of interior paint.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 1580.482.1:1994
NZS/AS 1580.483.1:1992
(Withdrawn)
Methods of test for paints and related materials - Resistance to artificial weathering Fluorescent UV-condensation type instruments
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 1580.483.2:1994
Methods of test for paints and related materials - Soluble lead content
AS/NZS 1580.501.1:1994
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Methods of test for paints and related materials - Preparation of acid extracts
AS/NZS 1580.501.2:1994
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Methods of test for paints and related materials - Determination of water by the Dean and
Stark method
Provides a procedure for determining the water in paint or paint materials using a Dean and Stark apparatus complying with AS R25.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 1580.503.1:1994
NZS/AS 1580.504.1:1993
(Withdrawn)
Methods of test for paints and related materials - Colour - Methods of colour measurement
AS/NZS 1580.601.3:1994
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
Methods of test for paints and related materials - Colour - Calculation of colour differences
AS/NZS 1580.601.4:1994
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
Methods of test for paints and related materials - Colour - Calculation of small colour
differences using the CMC equation
Technically identical with and reproduced from BS 6923:1988.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 1580.601.5:1994
NZS/AS 1580.602.1:1975
(Withdrawn)
Methods of test for paints and related materials - Measurement of specular gloss of nonmetallic paint films at 20 degrees, 60 degrees and 85 degrees
Provides procedures for determining the specular gloss of non-metallic paint films using a glossmeter. Identical with and reproduced
from ISO 2813:1994.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 1580.602.2:1995
NZS/AS 1580.603.1:1992
(Withdrawn)
NZS/AS 1580.604.1:1973
(Withdrawn)
NZS 1582:1961
(Withdrawn)
NZS 1583:1964
(Withdrawn)
Instrumentation for audiometry - Reference zero for the calibration of pure-tone bone
conduction audiometers
Specifies reference equivalent threshold force levels, essential characteristics of the bone vibrator and levels of masking noise
applied to the ear not under test. These are applicable to the calibration of bone vibrators for pure-tone bone conduction audiometry.
Identical with and reproduced from ISO 389-3:1994.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
AS/NZS 1591.1:1995
(Withdrawn)
Methods for sampling and analysing timber preservatives and preservative-treated timber Determination of preservative penetration by spot tests
Sets out the method for determination of the penetration of preservative into preservative-treated timber.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 1605.2:2006
Methods for sampling and analysing timber preservatives and preservative-treated timber Analysis methods for determination of preservative retention
Specifies the analysis methods for determination of preservative retention in treated timber.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 12 pages
AS/NZS 1605.3:2006
Methods for sampling and analysing timber preservatives and preservative-treated timber Analysis methods for determination of preservative solution concentration
Specifies the analysis methods for determination of preservative solution concentration.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 12 pages
AS/NZS 1605.4:2006
NZS/AS 1616:1974
(Withdrawn)
NZS/AS 1625:1976
(Withdrawn)
NZS/AS 1626:1974
(Withdrawn)
NZS/AS 1627.0:1977
(Withdrawn)
NZS/AS 1627.1:1989
(Withdrawn)
NZS/AS 1627.2:1989
(Withdrawn)
NZS/AS 1627.3:1988
(Withdrawn)
NZS/AS 1627.4:1989
(Withdrawn)
NZS/AS 1627.5:1994
(Withdrawn)
NZS/AS 1627.6:1977
(Withdrawn)
NZS/AS 1627.7:1988
(Withdrawn)
NZS/AS 1627.8:1978
(Withdrawn)
NZS/AS 1627.9:1989
(Withdrawn)
NZS/AS 1627.10:1980
(Withdrawn)
AS/NZS 1635.9.1:1995
Methods of test for pressure-sensitive adhesive tape - Thickness
Sets out the method for determining the thickness of pressure-sensitive adhesive tape.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
Methods of test for pressure-sensitive adhesive tape - Resistance to shear loading at
elevated temperatures
Sets out the method for determining the ability of pressure-sensitive adhesive tape to resist shear loading at elevated temperatures.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 1635.10.1:1995
Methods of test for pressure-sensitive adhesive tape - Water vapour transmission rate
AS/NZS 1635.11.1:1995
Sets out the method for determining the water vapour transmission rate of pressure-sensitive adhesive tape.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Methods of test for pressure-sensitive adhesive tape - Mending stability
AS/NZS 1635.21.1:1995
Sets out the method for determining whether a pressure-sensitive adhesive tape is suitable for long-term mending of paper by
qualitatively assessing adhesive ooze and colour stability.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS/AS 1649:1974
(Withdrawn)
NZS/AS 1650:1989
(Withdrawn)
NZS/AS 1651:1974
(Withdrawn)
NZS/AS 1652:1974
(Withdrawn)
Fixed platforms, walkways, stairways and ladders. Design, construction and installation
NZS/AS 1657:1992
Specifies requirements for design, construction and installation of fixed means of access to, and safe working at places normally
used by operating, inspection, maintenance and servicing personnel. Included in Appendices are methods for testing guardrails and
posts, as well as typical component dimensions and spacings for guardrailing.
Adopted Standard
$113.96+GST (Members), $142.45+GST (Retail), 27 pages
Test methods for electric cables, cords and conductors - Conductors and metallic
components
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 1660.1:1998
Test methods for electric cables, cords and conductors - Insulation, extruded semiconductive screens and non-metallic sheaths - Methods for general application
Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 1660.2.1:1998
Test methods for electric cables, cords and conductors - Insulation, extruded semiconductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and
XLPVC materials
Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
AS/NZS 1660.2.2:1998
Test methods for electric cables, cords and conductors - Insulation, extruded semiconductive screens and non-metallic sheaths - Methods specific to polyethylene and
polypropylene materials
Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 15 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 1660.2.4:1998
Test methods for electric cables, cords and conductors - Insulation, extruded semiconductive screens and non-metallic sheaths - Methods specific to cables above 1 kV
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2001 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 1660.2.5:1998
Test methods for electric cables, cords and conductors - Electrical tests
AS/NZS 1660.3:1998
Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 22 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
Test methods for electric cables, cords and conductors - Complete cable and flexible cord
AS/NZS 1660.4:1998
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Amendment 1, 1998 $33.60+GST (Members), $42.00+GST (Retail)
Test methods for electric cables, cords and conductors - Fire tests - Test for vertical flame
spread of vertically-mounted bunched wires or cables
Specifies methods of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or
optical, under defined conditions. The test is intended for type approval testing and various test categories are proposed. A modified
adoption of IEC 60332-3-10 Ed. 1.0 B (2000), IEC 60332-3-21 Ed. 1.0 B (2000), IEC 60332-3-22 Ed. 1.0 B (2000), IEC 60332-3-23
Ed. 1.0 B (2000), IEC 60332-3-24 Ed. 1.0 B (2000) and IEC 60332-3-25 Ed. 1.0 B (2000).
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 48 pages
AS/NZS 1660.5.1:2005
Test methods for electric cables, cords and conductors - Fire tests - Measurement of
smoke density of cables burning under defined conditions
Specifies the test procedure for the measurement of the density of the smoke emitted from electric or optical fibre cables burning
under defined conditions. Based on IEC 61034 Parts 1 and 2:2005 with national modifications.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
AS/NZS 1660.5.2:2006
AS/NZS 1660.5.3:1998
Test methods for electric cables, cords and conductors - Fire tests - Determination of the
amount of halogen acid gas evolved during the combustion of polymeric materials taken
from cables
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
Test methods for electric cables, cords and conductors - Fire tests - Determination of
degree of acidity of gases evolved during the combustion of materials taken from electric
cables by measuring pH and conductivity
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
AS/NZS 1660.5.4:1998
Test methods for electric cables, cords and conductors - Fire tests - Circuit integrity
AS/NZS 1660.5.5:2005
Test methods that define the ability of cables to maintain circuit integrity under defined fire conditions. Technically equivalent to IEC
60331 Parts 11:1999, 12:2002, 21:1999, 23:1999, 25:1999 and 31:2002.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 48 pages
Test methods for electric cables, cords and conductors - Fire tests - Test for vertical flame
propagation for a single insulated wire or cable
Specifies a method of test for the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable,
or optical cable under fire conditions. Identical to and reproduced from IEC 60332-1-1:2004, IEC 60332-1-2:2004 and IEC 60332-13:2004.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
AS/NZS 1660.5.6:2005
NZS 1661:1962
NZS 1662:1969
(Withdrawn)
NZS/AS 1672:1974
(Withdrawn)
Interior and workplace lighting - Part 2.1: Specific applications - Circulation spaces and
other general areas
Sets out recommendations for the lighting of circulation spaces and other areas which commonly occur in buildings of various types.
It contains material that adds to or amends the recommendations in AS/NZS 1680.1 and is intended to be read in conjunction with
that Standard and with any applicable specific recommendations in other Standards in the AS(/NZS) 1680 series.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
AS/NZS 1680.2.1:2008
Interior and workplace lighting - Part 2.2: Specific applications - Office and screen-based
tasks
Sets out recommendations for the lighting of office and similar tasks, including screen-based tasks. While the tasks may be
commonly performed in interiors called offices, they may also be performed in other interiors, for example reading, writing and
screen-based tasks frequently occur in most types of interior workplace.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 40 pages
AS/NZS 1680.2.2:2008
Interior and workplace lighting - Part 2.3: Specific applications - Educational and training
facilities
Creates a visual environment in which essential task details are made easy to see and adverse features which may cause visual
fatigue are either excluded or appropriately controlled. The Committee is of the view that the greatest scope for achieving this lies
with improvements in lighting quality rather than in the provision of higher illuminances.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 36 pages
AS/NZS 1680.2.3:2008
Plastics pipes and fittings for gas reticulation - Polyethylene compound for manufacturing
Specifies composition and test requirements. Appendices cover determination of thermal oxidative stability, weathering resistance,
dispersion of pigment, sustained pressure test, resistance of pipe to internal pressure at elevated temperature and chemical
resistance.
Adopted Standard
$57.37+GST (Members), $71.71+GST (Retail), 14 pages
Protective helmets for vehicle users
AS/NZS 1698:2006
Provides a specification for protective helmets for motor cyclists and users of other motor vehicles. Also provides a basis for helmets
used in motor sports where speed is a determining factor.
Reprinted to incorporate Amendments 1, 2 and 3
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 16 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2011 $33.60+GST (Members), $42.00+GST (Retail)
Model land drainage bylaw
NZS 1711:1962
Provides a model bylaw suitable for adoption by Land Drainage Boards.
Reprinted to append Amendment 1
$39.20+GST (Members), $49.00+GST (Retail), 11 pages
Amendment 1, 1972 $33.60+GST (Members), $42.00+GST (Retail)
Selection, use and maintenance of respiratory protective equipment
AS/NZS 1715:2009
Sets out the principles of respiratory protection, requirements and recommendations for the selection, use and maintenance of
personal respiratory protective equipment (RPE) in the workplace. This Standard does not deal with military applications for RPE, but
includes special needs of personnel involved in a special response hazardous material (HAZMAT) incident where respiratory
concerns need to be addressed.
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 104 pages
NZS 1716:1965
(Withdrawn)
Adopted Standard
$79.87+GST (Members), $99.84+GST (Retail), 20 pages
Amendment 1, 1989 $33.60+GST (Members), $42.00+GST (Retail)
Lifts, escalators and moving walks (SAA Lift Code) - Fire-rated landing doors
NZS/AS 1735.11:1986
Sets out requirements for fire-rated landing doors for retarding the passage of fire through openings in fire-rated liftwells. Applies
where doors are required to have a fire-rating certificate.
Adopted Standard
$27.20+GST (Members), $34.00+GST (Retail), 6 pages
Lifts, escalators and moving walks (SAA Lift Code) - Passenger lifts for private residence Automatically controlled
Specifies requirements for automatically controlled small-sized, low-speed passenger lifts that are installed in private residence, as
defined in AS 1735.1.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 44 pages
AS/NZS 1735.18.2002
NZS/BS 1740.1:1971
(Withdrawn)
NZS/ISO 1745:1975
(Withdrawn)
(Withdrawn)
AS/NZS 1766.2.12:2002
Food microbiology - Examination for specific organisms - Food and animal feeding stuffs Horizontal method for the detection and enumeration of Listeria monocytogenes Detection method
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 17 pages
AS/NZS 1766.2.16.1:1998
AS/NZS 1766.3.5:1999
AS/NZS 1766.3.14:1998
(Withdrawn)
NZS/BS 1780:1985
(Withdrawn)
(Withdrawn)
(Withdrawn)
NZS 1822:1964
(Withdrawn)
NZS 1825:1963
NZS/AS 1830:1986
(Withdrawn)
NZS/AS 1831:1985
(Withdrawn)
NZS/AS 1832:1985
(Withdrawn)
NZS/AS 1833:1986
(Withdrawn)
NZS/ISO 1834:1980
(Withdrawn)
NZS/ISO 1835:1980
(Withdrawn)
NZS/ISO 1836:1980
(Withdrawn)
Specifies requirements for portable rechargeable fire extinguishers of the powder type.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 4 pages
Portable fire extinguishers - Specific requirements for carbon dioxide type extinguishers
AS/NZS 1841.6:2007
Specifies requirements for portable rechargeable fire extinguishers of the carbon dioxide type. It does not apply to the design and
construction of the gas cylinder within which the carbon dioxide is contained.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 4 pages
Portable fire extinguishers - Specific requirements for vaporizing liquid type extinguishers
AS/NZS 1841.7:2007
Specifies requirements for portable rechargeable fire extinguishers of the vaporizing liquid type.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 2 pages
Portable fire extinguishers - Specific requirements for non-rechargeable type extinguishers
AS/NZS 1841.8:2007
Specifies requirements for portable non-rechargeable, stored-pressure fire extinguishers.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 4 pages
NZS 1845:1964
(Withdrawn)
AS/NZS 1851.16:1997
(Withdrawn)
International electrotechnical vocabulary - Introduction and list of parts of AS 1852 and IEC
60050
Lists the Parts of the International Electrotechnical Vocabulary (IEV). The IEV is a glossary of terms for electrotechnology issued as
separate Parts, each dealing with a specific field. Also indicates where there are equivalent Parts of AS 1852, and provides
endorsement of Parts not published by Standards Australia or Standards New Zealand. The Parts of IEV may be purchased from
Standards New Zealand. For a compilation of the terms and definitions, see the IEC Multilingual Dictionary on CD-ROM.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 21 pages
AS/NZS 1852.0:2000
(Withdrawn)
NZS 1880:1964
(Withdrawn)
NZS 1884:1969
(Withdrawn)
Floor coverings - Resilient sheet and tiles - Laying and maintenance practices
NZS/AS 1884:1985
Covers laying and fixing of unbacked floor coverings in all forms including semi-rigid PVC, flexible PVC, linoleum, cork, and rubber. It
deals with the site inspection, requirements for concrete, timber, particleboard or plywood subfloors, installation of underlays,
conditioning of floor covering and subfloor, laying and maintenance procedures. A method for testing dryness of concrete subfloors is
given in an appendix.
Adopted Standard
$57.37+GST (Members), $71.71+GST (Retail), 13 pages
Industrial fall-arrest systems and devices - Part 1: Harnesses and ancillary equipment
AS/NZS 1891.1:2007
Specifies requirements for the materials, design, manufacture and testing of harnesses, lanyards, pole straps and associated
equipment including connecting devices and personal energy absorbers for industrial restraint and fall-arrest purposes.
Reprinted to incorporate Amendment 1:2007 and Amendment 2:2008
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 52 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2008 $33.60+GST (Members), $42.00+GST (Retail)
Industrial fall-arrest systems and devices - Part 2: Horizontal lifeline and rail systems
AS/NZS 1891.2:2001
Specifies design and performance requirements for systems and associated component hardware for horizontal lifelines and rails
used for fall-arrest purposes. The Standard covers systems using either rigid rails or flexible lines. Test methods are given in
appendices.
Joint Australian/New Zealand Standard
NZS 1900.2:1984
NZS 1900.3:1985
NZS 1900.4:1985
NZS 1900.5:1988
NZS 1900.6:1986
NZS 1900.7:1985
NZS 1900.8:1976
NZS 1900.9:1990
NZS 1900.10:1964
NZS 1900.11.1:1986
Retroreflective materials and devices for road traffic control purposes - Retroreflective
devices (non-pavement application)
Specifies performance requirements for retroreflective devices (known as 'retroreflectors') intended for use as roadside delineators
for mounting above the pavement, e.g. on posts.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 20 pages
AS/NZS 1906.2:2007
Retroreflective materials and devices for road traffic control purposes - High-visibility
materials for safety garments
Specifies the photometric, colorimetric and physical property requirements for high-visibility materials for outdoor daytime use, or
retroreflective materials for use at night or in other dark conditions to be used for the manufacture of or for incorporation into
industrial safety garments designed to be worn in situations where the wearer needs to be highly visible. Immersible water safety
materials such as those used on personal flotation devices are not included.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
AS/NZS 1906.4:2010
NZS 1910:1965
NZS/BS 1916.1:1953
(Withdrawn)
NZS/BS 1916.2:1953
(Withdrawn)
NZS/BS 1916.3:1963
(Withdrawn)
NZS/AS 1917:1976
(Withdrawn)
NZS/ASTM F1918(Int):2001
NZS/BS 1936.2:1991
(Withdrawn)
NZS/ISO R1938.2:1971
(Withdrawn)
NZS/ISO 1940.1:1986
(Withdrawn)
NZS 1951:1965
(Withdrawn)
(Withdrawn)
(Withdrawn)
Electric cables - Underground coal mines - Other than reeling and trailing
AS/NZS 1972:2006
Specifies the construction of cables for fixed apparatus, armoured high voltage cables, feeder cables, machine cables and mine
shaft winder cables for underground use in coal mines.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 48 pages
NZS/AS 1977:1977
(Withdrawn)
NZS/AS 1979:1993
(Withdrawn)
NZS 1989:1965
NZS/ISO 1989:1978
(Withdrawn)
Welding cables
AS/NZS 1995:2003
Specifies the construction, test, current rating and duty cycle of welding cables.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 9 pages
NZS 1998:1965
(Withdrawn)
NZS/ASTM D1998:1991
(Withdrawn)
NZS 1999:1965
NZS 2000.1:1965
(Withdrawn)
NZS 2000.2:1966
(Withdrawn)
Methods of test for textiles - General - Universal yarn count system (Tex System)
AS/NZS 2001.1.2:1998
Sets out a universal numbering system to designate the fineness or coarseness of textile fibres, yarns, intermediate products (e.g.
tops and rovings) and other products of similar structures.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 2001.4.5:1998
AS/NZS 2007.1:2005
AS/NZS 2007.1 Supplement 1:2001 Performance of household electrical appliances - Dishwashers - Energy consumption
and performance - Test material - Spinach 800 gm tin
Comprises one 800 gm tin of spinach for inclusion as a soiling agent required when testing the performance of dishwashers to
AS/NZS 2007.1.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail)
Performance of household electrical appliances - Dishwashers - Energy efficiency labelling
requirements
Specifies the energy efficiency labelling requirements for electric dishwashers intended for household and similar use. This Standard
does not specify safety requirements.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 36 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2007.2:2005
(Withdrawn)
(Withdrawn)
NZS 2038:1966
(Withdrawn)
AS/NZS 2040.1:2005
(Withdrawn)
(Withdrawn)
(Withdrawn)
NZS/BS 2051.1:1973
(Withdrawn)
NZS/BS 2052:1989
(Withdrawn)
Conduits and fittings for electrical installations - Rigid plain conduits and fittings of fibrereinforced concrete material
To be read in conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 2053.3:1995
Conduits and fittings for electrical installations - Flexible plain conduits and fittings of
insulating material
To be read in conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 2053.4:1995
Conduits and fittings for electrical installations - Corrugated conduits and fittings of
insulating material
Specifies requirements for corrugated conduits and fittings of insulating material used in electrical installations. To be read in
conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 13 pages
AS/NZS 2053.5:2001
Conduits and fittings for electrical installations - Profile-wall, smooth-bore conduits and
fittings of insulating material
Specifies requirements for rigid, non-threadable, profile-wall, smooth-bore conduits and fittings of insulating materials used in
electrical installations. To be read in conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 6 pages
AS/NZS 2053.6:2001
Conduits and fittings for electrical installations - Rigid metal conduits and fittings
AS/NZS 2053.7:2002
Specifies requirements for threadable and non-threadable plain rigid metal conduits and fittings in sizes 20 to 50 mm OD. To be read
in conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 11 pages
Conduits and fittings for electrical installations - Flexible conduits and fittings of metal or
composite material
To be read in conjunction with AS/NZS 2053.1.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
AS/NZS 2053.8:1995
Bicycle helmets
AS/NZS 2063:2008
Specifies construction requirements and the basic performance requirements for impact energy attenuation, helmet stability, load
distribution, strength and effectiveness of the retention system and its attachment points and peripheral vision clearance for
lightweight protective helmets intended to mitigate the adverse effects of a blow to the head.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 20 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2064:1997
NZS 2065:1966
NZS/AS 2074:1982
(Withdrawn)
NZS 2078:1966
(Withdrawn)
(Withdrawn)
(Withdrawn)
Methods of test for veneer and plywood - General introduction and list of methods
AS/NZS 2098.0:2006
General introduction and list of methods.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
Methods of test for veneer and plywood - Moisture content of veneer and plywood
AS/NZS 2098.1:2006
Two methods for determining the moisture content of veneer and plywood are described in this Standard. Of these, the 'oven-dry'
method is more precise but more complex than the electrical resistance measuring method; it is also destructive.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
Methods of test for veneer and plywood - Bond quality of plywood (chisel test)
AS/NZS 2098.2:2006
Sets out the method for determining the quality of bond in plywood.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 2098.3:2006
Methods of test for veneer and plywood - Bond quality and strength of scarf joints in
plywood
Sets out the methods for determining the quality and relative bond strength of scarf joints in plywood.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
Methods of test for veneer and plywood - Measurement of dimensions and shape for
sheets of veneer and plywood
Sets out the methods for determining the thickness, length, width, squareness, edge straightness and flatness of veneer and
plywood sheets. It applies to whole flat sheets.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 2098.4:2006
Methods of test for veneer and plywood - Resistance of gluelines in plywood to attack by
micro-organisms
Sets out the method for determining the resistance of gluelines in plywood to attack by micro-organisms.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 2098.5:2006
Methods of test for veneer and plywood - Depth of peeler checks in veneer and plywood
AS/NZS 2098.6:2006
Sets out the method for determining the depth of peeler checks in veneer and plywood.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
Methods of test for veneer and plywood - Density of veneer and plywood
AS/NZS 2098.7:2006
Sets out two methods for determining the density of veneer and plywood.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
Methods of test for veneer and plywood - Water absorption and thickness swelling of
unpainted plywood
Sets out the method for determining the water absorption, through the face and edge, of unpainted plywood, and the hygroscopic
swelling resulting from the uptake of water.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 2098.8:2006
AS/NZS 2098.9:1995
AS/NZS 2098.10:1995
Methods of test for veneer and plywood - Determination of formaldehyde emissions for
plywood
Specifies a method for the determination of formaldehyde emissions from laminated veneer lumber (LVL). This Standard is based
upon the Japanese Agricultural Standard (JAS) method specified in MAFF Notification No. 237 but has been adapted to suit
products commonly manufactured and sold in Australian and New Zealand. The test method has been adapted to suit products
commonly manufactured and sold in Australia and New Zealand. Specifically, it allows product to be tested in the same condition
that it is supplied to the market, for example with edge and/or surface finish.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 2098.11:2005
NZMP 2101:1971
(Withdrawn)
NZS 2105:1966
AS/NZS 2106.0:1999
(Withdrawn)
Methods for the determination of the flash point of flammable liquids (closed cup) - Abel
closed cup method
Specifies the Abel closed cup method for determining the flash point of flammable and combustible liquids with flash points between
-30 degrees Celsius and 70 degrees Celsius. This Standard is identical with and has been reproduced from ISO13736:1997.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
AS/NZS 2106.1:1999
AS/NZS 2106.2:1999
(Withdrawn)
AS/NZS 2106.3:1999
(Withdrawn)
AS/NZS 2106.4:1999
(Withdrawn)
AS/NZS 2106.5:1999
(Withdrawn)
AS/NZS 2106.6:1999
(Withdrawn)
Acoustics - Recommended design sound levels and reverberation times for building
interiors
Recommends design sound levels and reverberation times for different areas of occupancy in various categories of buildings.
Specifies methods of measuring the ambient sound level reverberation time. This Standard is intended for use in assessing the
acoustic performance of buildings and building services. It does not apply to the evaluation of occupancy noise.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 15 pages
AS/NZS 2107:2000
AS/NZS 2108.1:1997
(Withdrawn)
NZS 2110:1966
(Withdrawn)
Textile floor coverings - Tests and measurements - Method 1: Machine-made textile floor
coverings - Determination of total thickness
AS/NZS 2111.3:1996
Textile floor coverings - Tests and measurements - Method 3: Determination of mass per
unit area
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 2111.5:1996
Textile floor coverings - Tests and measurements - Method 7: Determination of loop length
of pile
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 2111.7:1996
AS/NZS 2111.9:1996
Textile floor coverings - Tests and measurements - Method 9: Determination of the number
of tufts per unit length and per unit area
Textile floor coverings - Tests and measurements - Method 11: Determination of total pile
mass per unit area by complete dissection
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
AS/NZS 2111.11:1996
AS/NZS 2111.13:1996
Textile floor coverings - Tests and measurements - Method 13: Determination of total
thickness loss after brief, moderate static loading
Textile floor coverings - Tests and measurements - Method 14: Determination of total
thickness loss after prolonged, heavy static loading
Textile floor coverings - Tests and measurements - Method 15: Determination of tuft
withdrawal force
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 2111.15:1996
AS/NZS 2111.16:1996
Textile floor coverings - Tests and measurements - Method 16: Determination of bond
strength between backing components
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Textile floor coverings - Tests and measurements - Method 17: Determination of thickness,
compression and recovery characteristics
Technically equivalent to BS 4098:1975.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 2111.17:1996
Textile floor coverings - Tests and measurements - Method 18: Burning behaviour - Tablet
test at ambient temperature
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 2111.18:1997
Textile floor coverings - Tests and measurements - Method 19: Colourfastness tests Method 19.1: Rubbing
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 2111.19.1:1996
Textile floor coverings - Tests and measurements - Method 19: Colourfastness tests Method 19.2: Shampoo solution
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Amendment 1, 1998 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2111.19.2:1996
AS/NZS 2111.20:1996
Textile floor coverings - Tests and measurements - Method 20: Rectangular textile floor
coverings - Determination of dimensions
AS/NZS 2111.21:1996
NZS 2112:1966
(Withdrawn)
NZS 2119:1966
Textile floor coverings - Machine-made - Sampling and cutting specimens for physical
tests
Specifies sampling procedures to be used when testing carpets and other types of textile floor coverings.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 2119:1997
Methods of test for determining combustion propagation characteristics of plastics Determination of minimum oxygen concentration for flame propagation following top
surface ignition of vertically orientated specimens
Sets out a method for the determination of minimum oxygen concentration in an upward flowing mixture of oxygen and nitrogen that
will just support flame propagation. The method is applicable to physically self-supporting plastics, cellular plastics (flexible or rigid),
and film or thin sheet. A statistical method is used in the determination of the end point.
AS/NZS 2122.2:1999
(Withdrawn)
Cots for day nursery, hospital and institutional use - Safety requirements
AS/NZS 2130:1998
Specifies requirements for cots for day nursery, hospital and institutional use. These requirements include material, design,
construction, performance, labelling and marking, all relating to safety of the child within the cot. The Standard applies to cots
constructed of metal or plastic, but not timber cots due to the nature of the intended environment and the need for ease of cleaning.
The Standard does not specify requirements for folding cots.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
Amendment 1, 1998 $33.60+GST (Members), $42.00+GST (Retail)
NZS 2139:1967
NZS/AS 2140:1978
(Withdrawn)
NZS/AS 2141:1978
(Withdrawn)
(Withdrawn)
NZS 2153:1967
(Withdrawn)
Tractors and machinery for agriculture and forestry - Technical means for ensuring safety General
Specifies requirements for the design of tractors and machinery for agriculture and forestry regarding the prevention of accidents
arising from the use of such tractors and machinery. Also provides the technical means for improving the level of personal safety for
operators and users of tractors and machinery for agriculture and forestry. This Standard is identical with and has been reproduced
from ISO 4254-1:1989.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
AS/NZS 2153.1:1997
Tractors and machinery for agriculture and forestry - Technical means for ensuring safety Tractors
Specifies requirements regarding the prevention of accidents arising from the use of tractors by indicating the appropriate
parameters to be met when designing tractors. Additional to the requirements of AS/NZS 2153.1. This Standard is identical with and
has been reproduced from ISO 4254-3: 1992.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 2153.3:1997
Tractors and machinery for agriculture and forestry - Technical means for ensuring safety Forestry winches
Specifies safety requirements for winches used on forestry machinery and agricultural machinery used in forests. Additional to the
requirements of AS/NZS 2153.1. This Standard is identical with and has been reproduced from ISO 4254-4: 1990.
Joint Australian/New Zealand Standard
AS/NZS 2153.4:1997
Tractors and machinery for agriculture and forestry - Technical means for ensuring safety Equipment for crop protection
Specifies the special requirements to be considered when designing power-assisted sprayers for crop-protection and liquid fertilizer
application which are mounted, trailed or self-propelled. It is additional to the general requirements of AS/NZS 2153.1. This Standard
is based on but not equivalent to and reproduced from ISO 4254-6:1995.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 2153.6:1998
Tractors and machinery for agriculture and forestry - Technical means for ensuring safety Combine harvesters, forage and cotton harvesters
Specifies requirements for the prevention of accidents arising from the use of combine harvesters and self-propelled forage and
cotton harvesters. Additional to the requirements of AS/NZS 2153.1. This Standard is identical with and has been reproduced from
ISO 4254-7: 1995.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 2153.7:1997
Tractors and machinery for agriculture and forestry - Technical means for ensuring safety Equipment for sowing, planting and distributing fertilizers
Specifies technical means of improving the level of personal safety of operators and others involved during normal operation and
maintenance of equipment for sowing, planting and distributing fertilizers. Additional to the requirements of AS/NZS 2153.1. This
Standard is identical with and has been reproduced from ISO 4254-9:1992.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 2153.9:1997
NZS 2154:1967
AS/NZS 2161.4:1999
Occupational protective gloves - Protection against thermal risks (heat and fire)
Specifies requirements for gloves for protection against heat and flames in one or more of the following forms: fire, contact heat,
convective heat, radiant heat, small splashes or large quantities of molten metal. This Standard is identical with and has been
reproduced from EN 407:1994.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
Occupational protective gloves - Protection against cold
AS/NZS 2161.5:1998
Specifies the performance requirements and test methods for gloves which are intended to protect against convective or conductive
cold down to temperatures of 50 degrees C. This could be linked to either the climatic conditions or occupational activity concerned.
This Standard is technically equivalent to and reproduced from EN 511:1994.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Occupational protective gloves - Protection against cuts and stabs by hand knives Chainmail gloves and arm guards
Specifies requirements for the design, penetration resistance, ergonomic characteristics, weight, material, marking and instructions
for use of gloves and arm guards. This Standard is identical with and has been reproduced from BS EN 1082-1:1997.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 27 pages
AS/NZS 2161.7.1:1998
Occupational protective gloves - Protection against cuts and stabs by hand knives Gloves and arm guards made of material other than chainmail
Specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves,
arm guards and protective sleeves made of materials other than chainmail and rigid metal and plastics. Identical to ISO 139992:2003.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
AS/NZS 2161.7.2:2005
Occupational protective gloves - Protection against cuts and stabs by hand knives - Impact
cut test for fabric, leather and other materials
Specifies an impact cut test for use on fabric, leather and other materials used in protective clothing materials, gloves and arm
guards. Identical to ISO 13999-3:2002.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
AS/NZS 2161.7.3:2005
AS/NZS 2161.9:2002
AS/NZS 2161.10.1:2005
AS/NZS 2161.10.2:2005
(Withdrawn)
AS/NZS 2176.1:1996
(Withdrawn)
AS/NZS 2176.2:1996
(Withdrawn)
Specifications for rainwater goods, accessories and fasteners - Metal shape or sheet
rainwater goods, and metal accessories and fasteners
Specifies both performance and prescriptive requirements for a limited range of nominal sizes for metal shape or sheet rainwater
goods, and metal accessories and fasteners made of aluminium alloys, aluminium/zinc alloy-coated steel, copper and copper alloys,
zinc-coated steel, stainless steel and zinc. The Appendices include purchasing guidelines and test methods for demonstrating
compliance with the performance requirements.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 22 pages
AS/NZS 2179.1:1994
AS/NZS 2179.2(Int):1998
(Withdrawn)
Specification for bare hard-drawn copper conductors for overhead power lines
NZS 2206:1968
Applies to stranded conductors (having not fewer than seven strands) and specifies materials, dimensions, electrical and mechanical
properties and tests.
$39.20+GST (Members), $49.00+GST (Retail), 16 pages
NZS 2207:1968
(Withdrawn)
Safety, protective and occupational footwear - Guide to selection, care and use
AS/NZS 2210.1:2010
Provides users with advice for recommended practices for the selection, care and use of safety, protective and occupational
footwear for use in a wide range of environment and occupations.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
Occupational protective footwear - Test methods
AS/NZS 2210.2:2009
Provides manufacturers and users with test methods for footwear intended for use in workplace applications.
Joint Australian/New Zealand Standard
$178.40+GST (Members), $223.00+GST (Retail), 92 pages
AS/NZS 2210.7:2001
AS/NZS 2210.8:2001
AS/NZS 2210.9:2001
AS/NZS 2211.1:2004
Laser safety - Safety of products with optical sources, exclusively used for visible
information transmission to the human eye
Provides an adapted hazard categorization scheme and specific guidance for the safe use of visible optical sources that are used
exclusively for transmission of information to the human eye. This Standard is identical with and has been reproduced from IEC TS
60825-6:1999.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
Laser safety - Safety of products emitting infrared optical radiation, exclusively used for
wireless free air data transmission and surveillance
Provides requirements and specific guidance for the safe use of products which emit infrared optical radiation, where such products
are used exclusively for wireless free air data transmission and surveillance. This Standard is identical with and has been
reproduced from IEC TS 60825-7:2000.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
AS/NZS 2211.7:2002
AS/NZS 2211.12:2006
NZS 2218:1968
(Withdrawn)
(Withdrawn)
NZS 2235:1968
(Withdrawn)
NZS 2251:1969
(Withdrawn)
(Withdrawn)
(Withdrawn)
Plywood - Marine
AS/NZS 2272:2006
Specifies requirements for the manufacture, grading and finishing of plywood intended for marine use. It describes the basic marine
plywood product. Particular applications may require additional processing, preservative treatment or surface finishing. Also
specifies species of timber, veneer qualities, bond quality, joints, veneer construction, moisture content, dimensions and tolerances,
finishing, formaldehyde emissions and branding. A series of performance requirements relating to species, and a procedure for
evaluating and admitting new species are included. One bond type, Type A bond, is prescribed. Two face veneer grades A and O
have been specified. Quality A veneer is to be specified where a high quality clear finish is required and Quality O where the marine
plywood product is to be overlaid with fibreglass or similar coatings or overlays, or painted with a pigmented paint or varnish.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
NZS 2274:1969
(Withdrawn)
maintenance and testing required to ensure safety, compliance with relevant standards, and trouble-free operation while the
equipment is in service.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 48 pages
AS/NZS 2293.1:1998
(Withdrawn)
(Withdrawn)
Specifies requirements for the personnel, equipment and procedures used in occupational underwater operations associated with
the production, for commercial purposes, of feature films, television, natural history visuals, corporate videos and photographic stills,
and is applicable to all persons involved in the production, including producers, directors, cinematographers, gaffers and department
personnel, set construction personnel, underwater technicians, safety divers, stunt people, actors and stills photographers, including
self-employed and freelance operators. Applies to diving in water to depths not exceeding 30 m.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 28 pages
Glossary of paint and painting terms
AS/NZS 2310:2002
To provide a better understanding of the terminology used in the paint industry, for the use of those involved in the manufacture,
supply, purchase and use of paint, and those involved in the writing of Standards for paints and the framing of painting specifications.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 34 pages
Guide to the painting of buildings
AS/NZS 2311:2009
Provides a guide to products and procedures for the painting of buildings for general domestic, commercial and industrial use.
Joint Australian/New Zealand Standard
$178.40+GST (Members), $223.00+GST (Retail), 120 pages
Guide to the protection of structural steel against atmospheric corrosion by the use of
protective coatings
Provides guidelines for the selection and specification of coating systems for the short, medium and long term protection of structural
steel work against interior and exterior atmospheric, and non-atmospheric corrosive environments. The following aspects are
covered in detail: Atmospheric environments, planning and design, surface preparation treatments, metallic and paint coatings,
maintenance of coating systems, inspection and testing, and preparation of coating specifications. Contains comprehensive details
of modern paint systems, including properties and typical applications.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 130 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2312:2002
NZMP 2312:1987
NZS/ISO 2330:1974
(Withdrawn)
NZS/AS 2335:1980
(Withdrawn)
Methods of testing bitumen and related roadmaking products - General introduction and
list of standards
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 2341.0:2002
Methods of testing bitumen and related roadmaking products - Precision data - Definitions
AS/NZS 2341.1:1994
Defines terms used to express the precision of the test result obtained from a test method, and the terms used in the presentation of
precision data.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 1 page
Methods of testing bitumen and related roadmaking products - Determination of apparent
viscosity by "Shell" sliding plate micro-viscometer
Sets out a procedure for the determination of apparent viscosity of bitumens at a specified shear strain rate by means of the "Shell"
sliding plate micro-viscometer.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 2341.5:1997
AS/NZS 2341.10:1994
Methods of testing bitumen and related roadmaking products - Determination of the effect
of heat and air on a moving film of bitumen (rolling thin film oven (RTFO) test)
Sets out a treatment of bitumen which is intended to simulate the conditions obtained when the bitumen is used to manufacture hotmixed asphalt, and stipulates a procedure for measuring the flow properties of the bitumen before and after the treatment.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Methods of testing bitumen and related roadmaking products - Long-term exposure to heat
and air
Sets out a method based on the accelerated aging of bitumen to determine the time required for bitumen to reach a viscosity level
associated with distress in pavement surfacings.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 17 pages
AS/NZS 2341.13:1997
AS/NZS 2341.27:2008
Sets out a method for determining the degree of sedimentation of a bituminous emulsion on standing undisturbed. It provides a
means of evaluating the tendency for the two phases of an emulsion to separate with time.
Joint Australian/New Zealand Standard
$28.80+GST (Members), $36.00+GST (Retail), 4 pages
Methods of testing bitumen and related roadmaking products - Recovery of residue from
bituminous emulsion
Sets out a procedure specifically for the recovery of residue from bituminous emulsion for further testing. Where binder content is
required, AS/NZS 2341.23 is preferred.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 2341.30:1996
Methods of testing portland and blended cements - General introduction and list of
methods
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 1 page
AS/NZS 2350.0:1999
Methods of testing portland and blended cements - Method 18: Determination of water
retention of masonry cement
Sets out the method for determining the water retention of a masonry cement prepared and tested as a standard mortar.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 2350.18:2006
NZS/AS 2352:1980
(Withdrawn)
(Withdrawn)
Powered industrial trucks - Fork-lift trucks - Hook-on type fork arms - Vocabulary
NZS/AS 2359.10:1995
Specifies the terms relating to hook-on type fork arms for fork-lift trucks. This Standard is identical with and reproduced from ISO
2331:1974.
Adopted Standard
$27.20+GST (Members), $34.00+GST (Retail), 4 pages
Powered industrial trucks - Fork-lift trucks - Hook-on type fork arms and fork carriers Mounting dimensions
Specifies the interchangeability dimensional characteristics of fork carriers and hook-on type fork arms for fork-lift trucks. This
Standard is identical with and reproduced from ISO 2328:1993.
Adopted Standard
$27.20+GST (Members), $34.00+GST (Retail), 3 pages
NZS/AS 2359.11:1995
Specifies performance requirements to verify the suitability of windscreen repair systems and application windscreen repair
materials, to ensure satisfactory repairs to damaged windscreens.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 13 pages
Electric cables - Twisted pair for control and protection circuits
AS/NZS 2373:2003
Specifies the requirements for screened polyethylene (PE) insulated twisted pair control cables for voltages up to 0.6/1 kV, including
a support wire for aerial cables, intended for use in control, supervisory, protection and instrumentation circuits. It includes cables
commonly referred to as pilot cables but it does not apply to cables used solely for telecommunication purposes.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 28 pages
AS/NZS 2373.1:1995
Register of colours of manufacturers` identification threads for electric cables and cords
NZS/BS PD2379:1990
Lists colour combinations allocated to cable manufacturers. Includes approval threads of BASEC, CENELEC and CEE.
Adopted Standard
$192.00+GST (Members), $240.00+GST (Retail), 26 pages
Electrical equipment for explosive atmospheres - Selection, installation and maintenance General requirements
Specifies general requirements for the selection, installation and maintenance of electrical equipment for use in areas where
flammable materials are generated, prepared, processed, handled, stored or otherwise used, and which are therefore potentially
hazardous.
Reprinted to incorporate Amendments 1, 2 and 3
Joint Australian/New Zealand Standard
$188.00+GST (Members), $235.00+GST (Retail), 88 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2381.1:2005
Electrical equipment for explosive atmospheres - Selection, installation and maintenance Flameproof enclosure 'd'
Specifies requirements for the selection, installation and maintenance of electrical equipment, for use in explosive atmospheres,
which have been certified in accordance with the requirements of type of explosion protection d. It does not apply to electrical
equipment used in underground mining.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 28 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2381.2:2006
Water safety signs and beach safety flags - Specifications for beach safety flags - Colour,
shape, meaning and performance
Specifies requirements for the shape and colour of beach safety flags for the management of activities on coastal and inland
beaches, to be used for giving information on wind and water conditions and other hazardous conditions, and to indicate the location
of swimming and other aquatic activity zones extending from the beach into the water. It also specifies the colorimetric and
photometric properties and the physical properties, including strength and colour fastness, of the materials from which beach safety
flags are to be made. Adopted with national modifications from ISO 20712-2:2007.
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 20 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2416.2:2010
Water safety signs and beach safety flags - Guidance for use
AS/NZS 2416.3:2010
Provides guidance for the selection and use of water safety signs as specified in ISO 20712-1 and beach safety flags as specified in
ISO 20712-2, in aquatic environments. It provides guidance on their location, mounting positions, lighting and maintenance. It also
provides guidance on the design and location of multiple signs.
Reprinted to incorporate Amendment 1:2011
(Withdrawn)
AS/NZS 2430.3.1:2004
AS/NZS 2430.3.2:2004
AS/NZS 2430.3.3:2004
AS/NZS 2430.3.4:2004
AS/NZS 2430.3.5:2004
AS/NZS 2430.3.6:2004
AS/NZS 2430.3.7:2004
AS/NZS 2430.3.8:2004
AS/NZS 2430.3.9:2004
AS/NZS 2442.1 Supplement 3:1996 Performance of household electrical appliances - Rotary clothes dryers - Energy
consumption and performance - Test material - Pillow case
Comprises a pillow case which is suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS
2442.1:1996, or clothes washers to AS 2040-1990. Intended for sale to relevant manufacturers and other accredited test laboratories
only.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail)
AS/NZS 2442.1 Supplement 4:1996 Performance of household electrical appliances - Rotary clothes dryers - Energy
consumption and performance - Test material - Bath towel
Comprises a bath towel which is suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS
2442.1:1996, or clothes washers to AS 2040-1990. Intended for sale to relevant manufacturers and other accredited test laboratories
only.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail)
AS/NZS 2442.1 Supplement 6:1996 Performance of household electrical appliances - Rotary clothes dryers - Energy
consumption and performance - Test material - Double bed sheet
Comprises a double bed sheet which is suitable for inclusion in the standard test load required when testing clothes dryers to
AS/NZS 2442.1, or clothes washers to AS 2040. Intended for sale to relevant manufacturers and other accredited test laboratories
only.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail)
AS/NZS 2442.1 Supplement 7:1996
(Withdrawn)
AS/NZS 2442.1 Supplement 8:1996 Performance of household electrical appliances - Rotary clothes dryers - Energy
consumption and performance - Test material - Table cloth
Comprises undershorts which are suitable for inclusion in the standard test load required when testing clothes dryers to AS/NZS
2442.1 or clothes washers to AS/NZS 2040.1.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail)
Performance of household electrical appliances - Rotary clothes dryers - Energy labelling
requirements
Provides energy labelling requirements for rotary clothes dryers intended for household and similar use. Transitional aspects of
regulation are addressed.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2007
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 23 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2442.2:2000
Bolts, screws and nuts with British Standard Whitworth threads (rationalized series)
Specifies the dimensions for bolts and screws with British Standard Whitworth threads in diameters from 1/4 in to 6 in, and the
material requirements for steel bolts, screws and nuts for general use.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 22 pages
Textile floor coverings - Installation practice - General
AS/NZS 2455.1:2007
Sets out requirements for installing textile floor coverings (carpets). It gives details of the work necessary in preparing subfloor
surfaces, together with the procedures that are to be adopted where textile floor coverings are laid over various types of subfloors
and underlays, and where subfloor heating units are installed. Details of information to be obtained by the contractor are also
specified.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 36 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Textile floor coverings - Installation practice - Carpet tiles
AS/NZS 2455.2:2007
Sets out requirements for installing carpet tiles by the grid and perimeter adhesion system, the double-bond system and the pressure
sensitive system.
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 16 pages
NZS/BS 2457:1975
(Withdrawn)
(Withdrawn)
Medical equipment - Single use, winged intravenous devices (sterile) for general use
AS/NZS 2485:1995
Specifies requirements for sterilized winged devices, generally known as `scalp vein units,` for intravenous use. Appendices include
methods of test for biological, chemical and physical requirements.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 39 pages
Cross-linked polyethylene (PE-X) pipes for pressure applications
AS/NZS 2492:2007
Specifies requirements for cross-linked polyethylene pipes for the conveyance of fluids under pressure. Such fluids include, but are
not restricted to, water, wastewater, slurries, compressed air, and fuel gas. Fuel gas includes natural gas, liquefied petroleum gas
(LPG) in the vapour phase and LPG/air mixtures. The partial pressure of the LPG is not to exceed 300 kPa absolute.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 32 pages
NZS/BS 2494:1990
(Withdrawn)
AS/NZS 2496:1995
Breathing attachments for anaesthetic purposes for human use
Specifies basic requirements for breathing attachments for anaesthetic apparatus, including the sequence and dimensions of cone
and socket joints (conical fittings) of 15 mm, 19 mm, 22 mm, 23 mm and 30 mm sizes, used for adult and paediatric purposes.
Dimensions and form of screw-threaded, weight-bearing connections for use with attachments for anaesthetic apparatus and
ventilators are also specified.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 30 pages
Acoustics - Measurements of sound insulation in buildings and of buildings elements Laboratory measurement of room-to-room airborne sound insulation of a suspended
ceiling with a plenum above it
Provides a laboratory method of measurement the airborne sound insulation of a suspended ceiling with a plenum of defined height
mounted above an acoustical barrier which separates two rooms of a specified test facility. This Standard has been adopted with
national modifications and reproduced from ISO 140-9:1985.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 7 pages
AS/NZS 2499:2000
Methods of testing protective helmets - Determination of impact energy attenuation Helmet drop test
Sets out a method for determining the impact energy attenuation of a protective helmet. This revision is to incorporate changes to the
specification of headform materials in Clause 5.
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 8 pages
AS/NZS 2512.3.1:2007
Methods of testing protective helmets - Determination of impact energy attenuation Striker drop test
Sets out a method for determining the impact energy of a helmet, temple protector or faceguard, intended for use in a sport where
there is danger of being injured by a ball or puck.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 6 pages
AS/NZS 2512.3.2:1997
AS/NZS 2512.5.1:2008
Methods of testing protective helmets - Determination of strength of retention system Static strength
Sets out a method for determining the static strength of the retention system of a protective helmet. The method applies to each
individual component of a system in which the components can be independently fastened without securing the complete assembly.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 4 pages
Methods of testing protective helmets - Determination of strength of retention system Dynamic strength
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 2512.5.2:1998
Methods of testing protective helmets - Determination of stability of protective helmets Static stability
Sets out a method for determining the stability of a protective helmet on a test headform under static load.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 2512.7.1:2006
Methods of testing protective helmets - Determination of stability of protective helmets Dynamic stability
Sets out a method for determining the stability of a protective helmet on a test headform when subjected to a dynamic force.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
AS/NZS 2512.7.2:2009
NZS/AS 2536:1982
(Withdrawn)
NZS/AS 2537:1994
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure
applications - Part 1: Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) - General
Adopts ISO 15875-1:2003 with national modifications to specify the general aspects of mechanical jointing fittings made for use with
crosslinked polyethylene pipes in hot and cold water applications.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 20 pages
AS/NZS 2537.1:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure
applications - Part 2: Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) - Fittings
Adopts ISO 15875-3:2003 with national modifications to specify the general aspects of mechanical jointing fittings made for use with
crosslinked polyethylene pipes in hot and cold water applications.
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 24 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2537.2:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure
applications - Part 3: Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) - Fitness for purpose of the system
Adopts ISO 15875-5:2003 with national modifications to specify the general requirements to demonstrate fitness for purpose of
mechanical jointing fittings made for use with crosslinked polyethylene pipes in hot and cold water applications.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 16 pages
AS/NZS 2537.3:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure
applications - Part 4: Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) - Guidance for the assessment of conformity
Adopts ISO/TS 15875-7:2003 with national modifications to give guidance for the assessment of conformity of materials,
components, joints and assemblies and it is intended to be used by certification bodies, inspection bodies, testing laboratories and
manufacturers.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 28 pages
AS/NZS 2537.4:2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure
applications - Part 5: Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe
systems for the conveyance of gaseous fuels - Metric series - Specifications - Fittings for
mechanical jointing (including PE-X/metal transitions)
Adopts ISO 14531-3:2006 with national modifications and specifies the general aspects of mechanical jointing fittings made for use
with crosslinked polyethylene pipes in gaseous fuel applications.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 36 pages
AS/NZS 2537.5:2011
(Withdrawn)
AS/NZS 2572:1994
(Withdrawn)
Rules for the design of cranes - Specification for classification, stress calculations and
design criteria for structures
Gives a base for computing stresses in crane structures and permissible stresses for steels to BS 4360. Covers classification based
on severity of intended use of load to be considered, selection of steel, minimum thickness of plates and sections, working stresses,
basic stresses in joint fastenings, web plates and stiffeners and fluctuating loads. Appendices give classification, use of steels of
NZS/BS 2573.1:1983
higher tensile strength than those to BS 4360, effective lengths of jibs, basic formulae, design checks, and fatigue strength of
structural components.
Adopted Standard
$380.00+GST (Members), $475.00+GST (Retail), 74 pages
Rules for the design of cranes - Specification for classification, stress calculations and
design of mechanisms
Classification of mechanisms for all types of cranes based on severity of intended use, loads and load combinations, calculation of
stresses, stresses in components and the selection and verification of proprietary items. Appendices give classifications normally
associated with different types of cranes, assessment of torque and determination of fatigue reference stresses.
Reprinted incorporating Amendments 1 & 2
Adopted Standard
$272.00+GST (Members), $340.00+GST (Retail), 24 pages
Amendment 1, 1982 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 1986 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 2573.2:1980
AS/NZS 2615:2004
Hydraulic trolley jacks
Specifies minimum safety requirements, technical specifications and test methods for hydraulic trolley jacks. It does not apply to
vehicle jacks, which are specified in AS/NZS 2693.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 18 pages
Information and documentation - Format for information exchange
AS/NZS 2619:1998
Specifies the requirements for a generalized exchange format which will hold records describing all forms of material capable of
bibliographic description as well as other types of records. It is identical with and has been reproduced from ISO 2709:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Textiles - Guide to the selection of correct care labelling instructions from AS/NZS 1957
AS/NZS 2621:1998
Sets out guidelines to assist manufacturers in the selection of appropriate care labelling instructions from AS/NZS 1957 and specifies
basic performance requirements and test methods for colourfastness and dimensional stability which may be used to determine
whether an article complies with those requirements when cleaned in accordance with the instructions on the label.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 19 pages
Textile products - Fibre content labelling
AS/NZS 2622:1996
Specifies methods of labelling textile products with fibre content information. This revision clarifies allowable tolerances as well as
the components included in the fibre content determination of a textile product.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
BS 2627:1970
(Withdrawn)
NZS/ISO 2631.1:1985
(Withdrawn)
NZS/ISO 2631.2:1989
(Withdrawn)
NZS/ISO 2631.3:1985
(Withdrawn)
Codes for the representation of names of countries and their subdivisions - Country codes
AS/NZS 2632.1:2008
Provides basic guidelines for the implementation and maintenance of current country names in coded form. Identical with and
reproduced from ISO 3166-1:2006 including Corrigendum 1:2007.
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 73 pages
Codes for the representation of names of countries and their subdivisions - Country
subdivision code
Provides the structure for a code for the representation of names of principal administrative divisions, or similar areas, of countries
etc. included in ISO 3166-1 (AS 2632.1). This Standard is identical with and reproduced from ISO 3166-2:1998.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 105 pages
AS/NZS 2632.2:1999
Codes for the representation of names of countries and their subdivisions - Codes for
formerly used names of countries
Provides the principles and maintenance arrangements of a code for the representation of country names removed from editions 1 to
4 of ISO 3166 (AS 2632) and the consecutive edition of ISO 3166-1 (AS 2632.1). This Standard is identical with and reproduced
from ISO 3166-3:1999.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 11 pages
AS/NZS 2632.3:1999
AS/NZS 2633:1996
Guide to the specification of colours
Provides information on factors which should be taken into account when specifying colours. Describes various methods that may be
used to specify colours, giving guidance in the selection of the appropriate method.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 32 pages
NZS/BS 2634.1:1987
(Withdrawn)
NZS/BS 2634.2:1987
(Withdrawn)
(Withdrawn)
NZS/BS 2654:1989
(Withdrawn)
Vehicle jacks
AS/NZS 2693:2007
Specifies requirements for the design, construction, performance and labelling of jacks designed to raise vehicles. This edition
revises the warning notices.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
Medical devices - Polymer urethral catheters for general medical use
AS/NZS 2696:1996
Specifies requirements for polymer urethral catheters, manufactured sterile and non-sterile, and intended to be introduced through
the urethra into the urinary bladder. Appendices include methods for determining catheter balloon performance, flow rate, in-use
compatibility and cytoxicity.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 23 pages
Amendment 1, 1999 $33.60+GST (Members), $42.00+GST (Retail)
NZS/AS 2697:1990
(Withdrawn)
AS/NZS 2699.3:2002
(Withdrawn)
Adhesives for timber and timber products - Adhesives for manufacture of plywood and
laminated veneer lumber (LVL)
Provides the specifications for adhesives suitable for use in the plywood and laminated veneer lumber (LVL) manufacturing industry.
This draft is prepared as an Interim Standard awaiting the outcome of a major research project on new generation adhesives
durability currently in progress.
Interim Standard - Expires on 31 December 2010
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 28 pages
AS/NZS 2754.1(Int):2008
Radiofrequency fields - Part 2: Principles and methods of measurement and computation 3 kHz to 300 GHz
Specifies commonly accepted processes for assessing compliance with the exposure limits of RF safety standards such as
ARPANSA Standard RPS3 and New Zealand Standard NZS 2772.1. It includes methodologies for reliably assessing human
exposures to radiofrequency (RF) electromagnetic fields by measurement or computation, which form part of any compliance
assessment.
Joint Australian/New Zealand Standard
$210.40+GST (Members), $263.00+GST (Retail), 116 pages
AS/NZS 2772.2:2011
Information processing systems - Open Systems Interconnection - Basic reference model The basic model
Specifies a common basis for the coordination of standards development for the purpose of systems interconnection, while allowing
existing standards to be placed in perspective within the overall Reference Model. This Standard is identical with and has been
reproduced from ISO/IEC 7498-1:1994.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 59 pages
AS/NZS 2777.1:1998
NZS/BS 2779:1986
(Withdrawn)
AS/NZS 2794:1994
NZS/ISO 2795:1991
(Withdrawn)
Clothing for protection against heat and flame - General recommendations for selection,
care and use of protective clothing
Provides guidelines for users of occupational clothing where protection is needed against heat and flame. Adopted from and identical
to ISO/TR 2801:2007.
Joint Australian/New Zealand Standard
$90.40+GST (Members), $113.00+GST (Retail), 32 pages
AS/NZS ISO 2801:2008
Electric cables - Reeling and trailing for mining and general use (other than underground
coal mining)
Specifies the requirements for two classes of multicore elastomer insulated and sheathed flexible reeling and trailing cables for
surface mining, underground mining (other than coal mining) and general use, where movable plant requires electricity supply at
system voltages from 1.1/1.1 kV up to and including 33/33 kV.
Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 54 pages
Amendment 1, 2003 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2802:2000
NZS/BS 2803:1980
(Withdrawn)
AS/NZS 2803.1:1994
(Withdrawn)
AS/NZS 2803.2:1995
(Withdrawn)
AS/NZS 2804.1:1995
(Withdrawn)
AS/NZS 2804.2:1996
(Withdrawn)
(Withdrawn)
(Withdrawn)
Methods of sampling and testing asphalt - Bitumen content and aggregate grading Centrifugal extraction method
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Amendment 1, 1998 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2891.3.2:1997
Methods of sampling and testing asphalt - Bitumen content and aggregate grading Pressure filter method
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Amendment 1, 1998 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 2891.3.3:1997
Methods of sampling and testing asphalt - Field density tests - Determination of field
density of compacted asphalt using a nuclear surface moisture-density gauge - Direct
transmission mode
Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - direct transmission mode.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 2891.14.1.1:1996
Methods of sampling and testing asphalt - Field density tests - Determination of field
density of compacted asphalt using a nuclear surface moisture-density gauge Backscatter mode
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 10 pages
AS/NZS 2891.14.1.2:1999
Methods of sampling and testing asphalt - Field density tests - Determination of field
density of compacted asphalt using a nuclear thin-layer density gauge
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 11 pages
AS/NZS 2891.14.2:1999
AS/NZS 2891.14.3:1999
Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear thinlayer density gauge using standard blocks
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear
surface moisture-density gauge - Backscatter mode
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 2891.14.4:1999
Methods of sampling and testing asphalt - Field density tests - Density ratio of compacted
asphalt
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 2891.14.5:1999
AS/NZS 2895.1:2007
NZS/BS 2903:1980
(Withdrawn)
(Withdrawn)
(Withdrawn)
High pressure decorative laminates - Sheets made from thermosetting resins Determination of properties
Specifies the methods of test for determination of the properties of high pressure decorative laminated sheets. These methods are
primarily intended for testing the sheets specified in AS/NZS 2924.1:1998. This Standard is identical with and has been reproduced
from ISO 4586-2:1997.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 44 pages
AS/NZS 2924.2:1998
(Withdrawn)
AS/NZS 2947.2:2002
(Withdrawn)
AS/NZS 2947.4:1999
(Withdrawn)
NZS/AS 2958.1:1995
(Withdrawn)
(Withdrawn)
NZS 3000:1997
safe electrical installation. Part 2 provides installation practices that achieve certainty of compliance with the essential safety
requirements of Part 1.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 456 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Amendment A, 2011 $33.60+GST (Members), $42.00+GST (Retail)
Electrical Installations - Transportable structures and vehicles including their site supplies
AS/NZS 3001:2008
Sets out the requirements for electrical installations associated with transportable structures and vehicles that are intended for
connection to low-voltage a.c. supply systems (i.e. exceeding 50 V a.c. but not exceeding 1 000 V a.c.). For the purposes of this
Standard the term transportable structure includes both vehicles and structures with or without wheels that can readily be moved
from one site to another either under their own motive power or by some other means.
Reprinted to incorporate Amendment 1:2012. The content of New Zealand-only Amendment A:2009 (now superseded) is included in
Amendment 1:2012
Joint Australian/New Zealand Standard
$90.40+GST (Members), $113.00+GST (Retail), 52 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Electrical installations - Shows and carnivals
AS/NZS 3002:2008
Sets out requirements for the supply of electricity at low-voltage by wiring systems to power consuming devices used for
accommodation, entertainment or display purposes within - (a) concessions; (b) tents; (c) living quarters; and (d) other structures
associated with events with a maximum duration of four weeks. For the purposes of this Standard, events include exhibitions, shows,
carnivals, scouting jamborees, army camps and the like.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 32 pages
NZS 3003.1:2003
AS/NZS 3013:2005
AS/NZS 3015:2004
AS/NZS 3016:2002
This Standard sets out safety requirements for the installation and operation of electric security fences and their associated
equipment. It covers electric security fences powered by electric fence energizers supplied from all types of electric power sources.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Electrical installations - Verification guidelines
AS/NZS 3017:2007
Provides verification (inspection and testing) guidelines to ensure that electrical installations comply with the requirements of AS/NZS
3000 with regard to the prevention of people or livestock from sustaining an electric shock or injury from fire. Includes tests for earth
continuity and resistance, insulation resistance, polarity, correct circuit connections, phase sequence, earth fault-loop impedance,
operation of residual current devices (RCDs), measurement of the resistance of the earth electrode, measurement of touch voltage
and continuity, and resistance of the incoming neutral.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 56 pages
Electrical installations - Domestic installations
AS/NZS 3018:2001
Specifies requirements and suitable methods for installing electrical installations in domestic premises including alterations, additions
and repairs. Sufficient information has been included to allow the completion of an electrical installation without reference to AS/NZS
3000.
Reprinted to incorporate Amendment 1:2003.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 125 pages
Amendment 1, 2003 $33.60+GST (Members), $42.00+GST (Retail)
Electrical installations - In-service testing
NZS 3019:2004
Sets requirements for the inspection and testing of low voltage electrical installations that are in service or have been serviced. It
also includes requirements for rest homes, schools and similar installations and relocatable premises, caravan sites, pleasure craft
and marinas. Additionally it covers the inspection of work involving mains, main switchboards or main earthing systems and the
testing of work undertaken by homeowners involving the installation, extension or alteration of subcircuits.
Superseded by AS/NZS 3019:2007 but remains current until the Electricity Regulations are amended
$73.60+GST (Members), $92.00+GST (Retail), 31 pages
Electrical installations - Periodic verification
AS/NZS 3019:2007
Provides persons who carry out periodic verification, by inspection and/or testing, with the means to determine, as far as reasonably
practicable, whether the installation and all its constituent equipment is in a safe condition for continued use, and that the electrical
installation complies with the safety requirements for the prevention of fire or a person or livestock from sustaining an electric shock.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
NZS/ISO 3046.3:1989
(Withdrawn)
(Withdrawn)
NZS/ISO 3076:1984
(Withdrawn)
NZS/ISO 3077:1984
(Withdrawn)
AS/NZS 3087.1:2003
AS/NZS 3087.2:2003
(Withdrawn)
AS/NZS 3101:1992
NZS 3102:1983
NZS 3107:1978
NZS 3108:1983
AS/NZS 3108:1994
Concrete construction
NZS 3109:1997
Provides minimum requirements for the construction of reinforced concrete, unreinforced concrete, prestressed concrete or a
combination, in elements of any building or civil engineering structure.
Reprinted to incorporate Amendments 1 and 2
$73.60+GST (Members), $92.00+GST (Retail), 59 pages
Amendment 1, 2003 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2004 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3109.1:1996
(Withdrawn)
NZS 3115:1980
AS/NZS 3115:1996
(Withdrawn)
AS/NZS 3118:1993
AS/NZS 3123:2005
NZS/AS 3124:1982
(Superseded)
AS/NZS 3129.1:1993
AS/NZS 3129.2:1993
AS/NZS 3129.3:1993
Approval and test specification - Electrical equipment for spa and swimming pools
AS/NZS 3136:2001
Specifies electrical safety requirements, to be read in conjunction with NZS/AS 3100. Applies to spa-bath, spa pool and swimming
pool pumps, heaters, blowers, chlorinators, chemical injection equipment, and control equipment. Does not apply to luminaires, nor
to equipment for aquariums (see AS/NZS 3192) or fountains. Note: Further regulatory requirements apply; consult NZECP 2, issued
by the Chief Electrical Inspector, Ministry of Commerce.
Superseded in part by AS/NZS 3350.2.60:2000 but is a current standard; Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2005 $33.60+GST (Members), $42.00+GST (Retail)
NZS/AS 3137:1992
(Withdrawn)
AS/NZS 3139.1:1995
(Withdrawn)
NZS/AS 3147:1992
AS/NZS 3150:1993
NZS 3153:1974
(Withdrawn)
AS/NZS 3155:1995
AS/NZS 3156:1995
AS/NZS 3157:1993
NZS/AS 3158:1975
(Withdrawn)
AS/NZS 3164:1994
Approval and test specification - Cables for high voltage luminous discharge tube
installations
Specifies the construction, dimensions and tests for single-core flexible cables for operation at voltages up to and including 7.5 kV to
earth, used for the wiring of high voltages luminous discharge tube installations.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 3166:1993
NZS/AS 3169:1989
AS/NZS 3172:1996
AS/NZS 3175.1:1994
AS/NZS 3175.2.1:1994
(Withdrawn)
AS/NZS 3175.2.2:1994
(Withdrawn)
Approval and test specification - Electric cables - Silicone rubber insulated - For working
voltages up to and including 0.6/1 kV
Specifies the construction, dimensions and tests for cables insulated with silicone rubber, intended for use in electrical installations at
working voltages up to and including 0.6/1 kV. The Standard does not apply to heavy duty flexible cable applications, which are
included in other cable Standards.
Adopted Standard
$135.70+GST (Members), $169.63+GST (Retail), 30 pages
NZS/AS 3178:1991
AS/NZS 3179:1993
AS/NZS 3182:1995
NZS/AS 3184:1990
AS/NZS 3187:1995
AS/NZS 3188:1995
(Withdrawn)
NZS/AS 3196:1986
consolidated version of AS 3200.1.0-1990 (NZS 6150:1990) incorporating its Amendments 1, 2 and 3. Users of AS 3200.1.0-1990
and its Amendments 1, 2 and 3 are informed that changes in this consolidated edition are limited to the designation, title and
presentation. This Standard is based on and has been reproduced from IEC 60601-1:1998 and its first and second amendments
together with a ZZ appendix added for requirements specific to Australia and New Zealand.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 195 pages
Approval and test specification - Medical electrical equipment - General requirements for
safety - Collateral Standard - Safety requirements for medical electrical systems
Applies to the safety of medical electrical systems. It describes the safety requirements for these systems necessary to provide
protection to the patient and operator. This standard is identical to and reproduced from IEC 60601-1-1:1992.
Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 19 pages
Amendment 1, 1997 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3200.1.1:1995
Medical electrical equipment - Part 1.2: General requirements for safety - Collateral
Standard: Electromagnetic compatibility - Requirements and tests
Establishes a minimum baseline of performance in the presence of expected levels of electromagnetic disturbance. Recognizes that
there is a shared responsibility between manufacturers, customers and users to ensure that equipment and systems are designed
and operated as intended. Identical to and reproduced from IEC 60601-1-2:2004.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 108 pages
AS/NZS 3200.1.2:2005
Approval and test specification - Medical electrical equipment - Part 1.3: General
requirements for safety - Collateral standard - Requirements for radiation protection in
diagnostic X-ray equipment
Specifies protective measures to be taken by manufacturers in the design and construction of medical diagnostic equipment and its
subassemblies.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 51 pages
AS/NZS 3200.1.3:1996
Approval and test specification - Medical electrical equipment - Part 1.4: General
requirements for safety - Collateral Standard - Programmable electrical medical systems
Specifies requirements for the process by which a programmable electrical medical system is designed. Identical with and
reproduced from IEC 60601-1-4:1996.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 26 pages
AS/NZS 3200.1.4:1997
Medical electrical equipment - Part 1.8: General requirements for safety - Collateral
Standard: General requirements, tests and guidance for alarm systems in medical
electrical equipment and medical electrical systems
Specifies requirements for alarm systems and alarm signals in medical electrical equipment and medical electrical systems. Also
provides guidance for the application of alarm systems. Identical and reproduced from IEC 60601-1-8:2003.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 84 pages
AS/NZS 3200.1.8:2005
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Electron accelerators in the range of 1 MeV to 50 MeV
Specifies requirements to be complied with by the manufacturer in the design and construction of electron accelerators for use in
radiotherapy. It is identical with and has been reproduced from IEC 60601-2-1:1998. This Standard refers extensively to its Parent
Standard, AS/NZS 3200.1.0. A readily available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this Part.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 59 pages
AS/NZS 3200.2.1:1999
AS/NZS 3200.2.2:1999
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - High frequency surgical equipment
Specifies requirements for the safe design and manufacture of high frequency surgical equipment. This Standard modifies and has
been reproduced from IEC 60601-2-2:1998 with a ZZ Appendix for additional Australian and New Zealand requirements. A thorough
working knowledge of its Parent Standard, AS/NZS 3200.1.0:1998, or a readily available copy, is necessary to deal with some of the
technical issues raised.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 36 pages
NZS/AS 3200.2.3:1992
(Withdrawn)
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Cardiac defibrillators
Specifies requirements for the safety of cardiac defibrillators. Does not apply to implantable defibrillators, remote control
defibrillators, external transcutaneous pacemakers, or separate stand alone cardiac monitors. Cardiac monitors which use separate
ECG monitoring electrodes are not within the scope of the Standard unless they are used as the sole basis for AED rhythm
recognition detection or beat detection for synchronized cardioversion. Identical to and reproduced from IEC 60601-2-4:2005.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 64 pages
AS/NZS 3200.2.4:2006
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Ultrasonic physiotherapy equipment
Specifies requirements for the safety of ultrasonic physiotherapy equipment used in medical practice. It modifies, and has been
reproduced from, IEC 60601-2-5:2000 with variations for Australia and New Zealand included in a ZZ Appendix.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
AS/NZS 3200.2.5:2002
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Microwave therapy equipment
Provides requirements for the safety of microwave therapy equipment used in medical practice. Does not apply to equipment
specified for hyperthermia. Adopts IEC 60601-2-6:1984 with national modifications.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
AS/NZS 3200.2.6:2005
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - High voltage generators of diagnostic X-ray generators
Specifies particular requirements for the safety of high voltage X-ray generators. It is based on but not equivalent to and reproduced
from IEC 60601-2-7:1998 with additional requirements for Australia and New Zealand provided in an appendix. This Standard refers
to its Parent Standard, AS/NZS 3200.1.0:1998. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of
this part.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 40 pages
AS/NZS 3200.2.7:1999
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Therapeutic X-ray generators
Applies to therapeutic X-ray generators that operate within nominal X-ray tube voltages from 10 kV to 400 kV inclusive when
connected to alternating current supply mains. It is supplementary to AS 3200.1-1990/NZS 6150:1990 Approval and test
specification - Medical electrical equipment, Part 1: General requirements for safety. This standard is identical to and reproduced
from IEC 60601-2-8:1987.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 32 pages
Amendment 1, 1999 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3200.2.8:1994
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Patient contact dosemeters used in radiotherapy with electrically connected
detectors
Specifies safety requirements for the design and manufacture of patient contact dosemeters used in radiotherapy with electrically
connected detectors. This Standard is identical with and has been reproduced from IEC 60601-2-9:1996.
Joint Australian/New Zealand Standard
AS/NZS 3200.2.9:1997
AS/NZS 3200.2.11:1999
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Anaesthetic systems
Provides safety and essential requirements for an anaesthetic system as well as individual devices designed for use in an
anaesthetic system. Does not apply to anaesthetic systems intended for use with flammable anaesthetic agents, portable
anaesthetic systems for use in remote sites, open fields for rescue operations or in disaster areas, or to dental analgesia apparatus.
Identical to and reproduced from IEC 60601-2-13:2003.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 50 pages
AS/NZS 3200.2.13:2005
NZS/AS 3200.2.14:1992
(Withdrawn)
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Capacitor discharge X-ray generators
Applies to capacitor discharge X-ray generators operating in intermittent mode for medical radiography, in which the electrical energy
for loading of the X-ray tube is completely or mainly capacitively stored at, and switched in, the high-voltage circuit. It is
supplementary to AS 3200.1-1990/NZS 6150:1990 Approval and test specification - Medical electrical equipment, Part 1: General
requirements for safety. This standard is identical to and reproduced from IEC 60601-2-15:1988.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 30 pages
AS/NZS 3200.2.15:1994
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Haemodialysis, haemodiafiltration and haemofiltration equipment
Specifies particular requirements for the safety of haemodialysis, haemodialfiltration and haemofiltration equipment. It is identical
with and reproduced from IEC 60601-2-16:1998. This Standard refers extensively to its Parent Standard, AS/NZS 3200.1.0:1998. An
available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this Part.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 21 pages
AS/NZS 3200.2.16:1999
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Remote-controlled automatically driven gamma-ray afterloading equipment
Applies to remote-controlled automatically driven electro-medical equipment for gamma-ray therapy of human subjects using
afterloading. It is supplementary to AS 3200.1-1990/NZS 6150:1990 Approval and test specification - Medical electrical equipment,
Part 1: General requirements for safety. This standard is identical to and reproduced from IEC 60601-2-17:1989.
Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 22 pages
Amendment 1, 1997 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3200.2.17:1994
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Endoscopic equipment
Specifies requirements for the safety of endoscopic equipment and its interconnections with endoscopically-used accessories. It is
based on and reproduced from IEC 60601-2-18:1996 and includes the full technical text of that Standard. An Appendix ZZ specifies
additional requirements applicable in Australia and New Zealand.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 21 pages
AS/NZS 3200.2.18:1997
AS/NZS 3200.2.21:1994
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Infant radiant warmers
Applies to infant warmers using a radiant heating source. The device is intended to maintain the thermal balance of an infant patient
by direct radiation of energy in the infra-red region of the electromagnetic spectrum. It is supplementary to AS 3200.1-1990/NZS
6150:1990 Approval and test specification - Medical electrical equipment, Part 1: General requirements for safety. This standard is
identical to and reproduced from IEC 60601-2-21:1994.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 25 pages
Amendment 1, 1998 $33.60+GST (Members), $42.00+GST (Retail)
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Diagnostic and therapeutic laser equipment
Specifies particular requirements for the safety of laser equipment for medical applications classified as Class 3B or Class 4 laser
product. It is technically equivalent to IEC 60601.2.22 :1995 and incorporates an Appendix ZZ of additional requirements for
Australia and New Zealand.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 22 pages
AS/NZS 3200.2.22:1997
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Transcutaneous partial pressure monitoring equipment
Specifies the particular requirements for the safety, including essential performances, of transcutaneous partial pressure monitoring
equipment, and applies to equipment used with adults, children and neonates, including their use in foetal monitoring during birth. It
does not apply to haemoglobin saturation oximeters or to devices applied to surfaces of the body other than the skin. This Standard
is to be read in conjunction with AS/NZS 3200.1.0:1998. It is identical with, and reproduced from, IEC 60601-2-23:1999.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 30 pages
AS/NZS 3200.2.23:2001
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Infusion pumps and controllers
Provides particular requirements for the safety of infusion pumps, infusion controllers, syringe pumps and pumps for ambulatory use.
A thorough working knowledge of its parent Standard, AS/NZS 3200.1.0:1998, or a readily available copy, is necessary to deal with
some of the technical issues raised. This Standard is technically equivalent to and has been reproduced from IEC 60601-2-24:1998.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 60 pages
AS/NZS 3200.2.24:1999
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Electrocardiographs
Specifies the particular safety requirements for electrocardiographs intended for the production of detachable electrocardiograms for
diagnostic purposes. It also applies to vectorcardiographs. It is supplementary to AS 3200.1-1990/NZS6150:1990 Approval and test
specification - Medical electrical equipment, Part 1: General requirements for safety, and is technically equivalent to IEC 60601-225:1993.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 27 pages
AS/NZS 3200.2.25:1993
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Electroencephalographs
Specifies requirements for electroencephalographs. The Standard does not cover the special requirements for other equipment also
used in electroencephalography. Identical to IEC 60601-2-26:2002.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 28 pages
AS/NZS 3200.2.26:2005
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Electrocardiographic monitoring equipment
Specifies the particular safety requirements electrocardiographic (ECG) monitoring equipment, excluding certain types of ambulatory
and telemetric devices. Technically equivalent to IEC 60601-2-27:1994.
Includes Appendix ZZ which details variations to the application of IEC 60601-2-27:1994 in Australia and New Zealand.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 26 pages
AS/NZS 3200.2.27:1996
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - X-ray source assemblies and X-ray tube assemblies for medical diagnosis
Applies to X-ray source assemblies and X-ray tube assemblies for medical diagnosis and to components thereof, specified for use in
medical X-ray equipment including equipment for computed tomography incorporating a specified high voltage generator complying
with IEC 601-2-7 or IEC 601-2-15. It is supplementary to AS 3200.1-1990/NZS 6150:1990 Approval and test specification - Medical
electrical equipment, Part 1: General requirements for safety. This standard is identical to and reproduced from IEC 60601-228:1993.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
AS/NZS 3200.2.28:1994
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Radiotherapy simulators
Specifies requirements for the safe design and manufacture of radiotherapy simulators. A thorough knowledge, or a readily available
copy, of the parent Standard AS/NZS 3200.1.0:1998, is necessary to deal with some of the technical issues raised. This Standard
has been reproduced from IEC 60601.2.29:1999, but includes a ZZ Appendix of supplementary requirements for Australia and New
Zealand.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 26 pages
AS/NZS 3200.2.29:2000
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Automatic cycling non-invasive blood pressure monitoring equipment
Specifies the particular requirements for the safety, including essential performances, of automatic cycling non-invasive blood
pressure monitoring equipment, which may be attended or unattended. It does not apply to blood pressure measuring equipment,
which may be attended or unattended. It does not apply to blood pressure measuring equipment which uses finger transducers or to
semi-automatic blood pressure measuring equipment, typically in which each determination needs to be initiated manually. This
Standard is to be read in conjunction with AS/NZS 3200.1.0:1998. It modifies and has been reproduced from IEC 60601-2-30:1999
with variations for Australia and New Zealand included in Appendix ZZ.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 40 pages
AS/NZS 3200.2.30:2001
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - External cardiac pacemakers with internal power source
Specifies the particular safety requirements for external pacemakers used to pace patients prior to the implanting of an internal
pacemaker or for temporary pacing related to other medical procedures. This standard is identical to and reproduced from IEC
60601-2-31:1994.
Reprinted to incorporate Amendment 1:1999
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 27 pages
Amendment 1, 1999 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3200.2.31:1996
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Associated equipment of X-ray equipment
Applies to equipment and devices associated with X-ray equipment for supporting and positioning the functional components used
for the application of the X-radiation. It is supplementary to AS 3200.1-1990/NZS 6150:1990 Approval and test specification Medical electrical equipment, Part 1: General requirements for safety. This standard is identical to and reproduced from IEC 606012-32:1994.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 15 pages
AS/NZS 3200.2.32:1994
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Magnetic resonance equipment for medical diagnosis
Specifies requirements for magnetic resonance equipment and magnetic resonance systems. Does not cover the application of
magnetic resonance equipment beyond the intended use. Adopted from IEC 60601-2-33:2002 with national modifications.
Joint Australian/New Zealand Standard
$241.60+GST (Members), $302.00+GST (Retail), 88 pages
AS/NZS 3200.2.33:2005
AS/NZS 3200.2.34:1996
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Direct blood-pressure monitoring equipment
Specifies medical electrical equipment, including transducers, used for monitoring and recording the internal blood-pressure of
patients. This standard is identical to and reproduced from IEC 60601-2-34:1994.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 23 pages
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Blankets, pads and mattresses intended for heating in medical use
Specifies safety requirements for the design and manufacture of blankets, pads and mattresses, intended for heating in medical use.
It is identical with and has been reproduced from IEC 60601-2-35:1996. This Standard refers to its Parent Standard, AS/NZS
3200.1.0:1998. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this part.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 44 pages
AS/NZS 3200.2.35:1999
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Extracorporeally induced lithotripsy
Specifies safety requirements for the design and manufacture of devices (lithotripters) intended to generate acoustic pulses from
outside the human body for the purpose of fragmenting calculi (`stones`) within the body. This Standard is identical to and has been
reproduced from IEC 60601-2-36:1997.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 14 pages
AS/NZS 3200.2.36:1998
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Electrically and manually operated medical beds for adult use
Specifies safety requirements for the design and manufacture of electrically operated hospital beds, including requirements for side
rails and prevention of entrapment, and variations for Australian/New Zealand use.. Identical with and has been reproduced from IEC
60601-2-38:1996, Amendment 1:1999.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 56 pages
AS/NZS 3200.2.38:2007
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Peritoneal dialysis equipment
Specifies requirements for the design and manufacture of electrically safe peritoneal dialysis equipment. This Standard is identical
with and reproduced from IEC 60601-2-39:1999.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 9 pages
AS/NZS 3200.2.39:2001
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Electromyographs and evoked response equipment
Specifies safety requirements for the design and manufacture of electromyographs and evoked response equipment. It is identical
with and has been reproduced from IEC 60501-2-40:1998. This Standard refers extensively to its Parent Standard, AS/NZS
3200.1.0. An available copy of AS/NZS 3200.1.0 is essential to the meaningful interpretation of this Part.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 13 pages
AS/NZS 3200.2.40:1999
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Surgical luminaires and luminaires for diagnosis
Specifies the requirements to be applied to surgical luminaires and luminaires for diagnosis. Does not apply to headlights,
endoscopes, laparoscopes and their light sources, luminaires used in dentistry, luminaires for general purposes and luminaires of an
emergency lighting. This Standard is to be read in conjunction with AS/NZS 3200.1.1:1998. It modifies, and has been reproduced
from, IEC 60601-2-41:2000 with variations for Australia and New Zealand included in an Appendix.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 33 pages
AS/NZS 3200.2.41:2002
AS/NZS 3200.2.43:2002
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - X-ray equipment for interventional procedures
Applies to X-ray equipment declared by the manufacturer to be suitable for prolonged radioscopically guided interventional
procedures. Does not apply to equipment for radiotherapy, equipment for computed tomography, accessories intended to be
introduced into the patient, and mammographic X-ray equipment. This Standard modifies, and has been reproduced from, IEC
60601-2-43:2000 with variations for Australia and New Zealand included in a ZZ Appendix.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 31 pages
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - X-ray equipment for computed tomography
Specifies requirements for X-ray equipment for computed tomography (CT Scanners). Includes safety requirements for the X-ray
generator and those where high voltage generators are integrated with an X-ray tube assembly. Reproduced from and identical to
IEC 60601-2-44:2002.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 44 pages
AS/NZS 3200.2.44:2005
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Mammographic X-ray equipment and mammographic stereotactic devices
Specifies particular requirements for the safe design and manufacture of mammographic X-ray equipment and mammographic
stereotactic devices. A thorough working knowledge of its parent Standard AS/NZS 3200.1.0, or a readily available copy, is
necessary to deal with some of the technical issues raised. It is identical with and reproduced from IEC 60601-2-45:1998.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 15 pages
AS/NZS 3200.2.45:1999
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Operating tables
Specifies the safety requirements for operating tables, whether or not having electrical parts, including transporters, used for the
transportation of the table top to or from the base or pedestal of an operating table with detachable table top. This standard is
identical with and has been reproduced from IEC 60601-2-46:1998.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 13 pages
AS/NZS 3200.2.46:2003
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Oxygen concentrators for individual patient use
Specifies safety requirements for continuous-flow oxygen concentrators. Does not apply to oxygen concentrators intended to supply
gas to several patients via a piped medical gas installation or to those intended for use in the presence of flammable anaesthetic
and/or cleaning agents. Identical to and reproduced from ISO 8359:1996.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 36 pages
AS/NZS 3200.2.200:2005
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Dento-maxillofacial X-ray equipment
Specifies requirements for the design and manufacture of dento-maxillofacial X-ray equipment. It is a locally developed Standard,
that follows the style and technical prerequisites of IEC 60601-1. It refers to AS/NZS 3200.1.0, the local version of IEC 60601-1, and
should be read in conjunction with AS 3200.1.0.
Reprinted to incorporate Amendment 1:2002
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 23 pages
Amendment 1, 2002 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3200.2.201:2000
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Infant apnoea monitors for domestic use
Specifies general requirements for the safety of infant apnoea monitoring equipment, for domestic use.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 15 pages
AS/NZS 3200.2.202:1996
AS/NZS 3200.3.1:1998
Approval and test specification - Medical electrical equipment - Particular requirements for
safety - Essential performance requirements for transcutaneous oxygen and carbon
dioxide partial pressure monitoring equipment
Specifies essential requirements for the performance of transcutaneous oxygen and carbon dioxide partial pressure monitoring
equipment. It is identical with and has been reproduced from IEC 60601-3-1:1996.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
NZS 3203:1978
(Withdrawn)
NZS/AS 3209:1986
NZS/AS 3210:1986
NZS/AS 3211:1986
AS/NZS 3250:1995
AS/NZS 3260:1993
(Withdrawn)
NZS/BS 3300:1985
(Withdrawn)
NZS 3302:1983
(Withdrawn)
AS/NZS 3302:1992
NZS 3331:1972
(Withdrawn)
AS/NZS 3350.2.3:1995
AS/NZS 3350.2.4:1998
AS/NZS 3350.2.5:1995
AS/NZS 3350.2.6:2006
AS/NZS 3350.2.7:2001
AS/NZS 3350.2.8:1995
AS/NZS 3350.2.9:1999
AS/NZS 3350.2.10:1996
AS/NZS 3350.2.11:2001
AS/NZS 3350.2.12:1997
AS/NZS 3350.2.13:2001
AS/NZS 3350.2.14:1995
AS/NZS 3350.2.15:2002
AS/NZS 3350.2.17:2000
AS/NZS 3350.2.21:1999
AS/NZS 3350.2.23:2001
AS/NZS 3350.2.24:2001
AS/NZS 3350.2.25:2001
AS/NZS 3350.2.29:2001
AS/NZS 3350.2.30:2007
AS/NZS 3350.2.31:2001
AS/NZS 3350.2.32:2001
AS/NZS 3350.2.34:2001
AS/NZS 3350.2.35:1999
AS/NZS 3350.2.41:1997
AS/NZS 3350.2.43:2001
AS/NZS 3350.2.44:1999
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is technically equivalent to and has been reproduced from IEC 60335-2-44:1997.
Reprinted to incorporate Amendment 1:2002
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 11 pages
Amendment 1, 2002 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3350.2.45:1997
AS/NZS 3350.2.51:1998
AS/NZS 3350.2.54:1997
AS/NZS 3350.2.55:1998
AS/NZS 3350.2.59:1999
AS/NZS 3350.2.60:2000
AS/NZS 3350.2.61:2001
Safety of household and similar electrical appliances - Particular requirements - Aircleaning appliances
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This standard is technically equivalent to and reproduced from IEC 60335-2-65:1993.
Reprinted to incorporate Amendments 1, 2 & 3
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
Amendment 1, 1998 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2001 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3350.2.65:1997
AS/NZS 3350.2.66:1997
AS/NZS 3350.2.73:1996
AS/NZS 3350.2.74:2001
Safety of household and similar electrical appliances - Particular requirements Commercial dispensing appliances and vending machines
Specifies particular safety requirements for approval and test purposes. To be read in conjunction with AS/NZS 3350.1. This
standard is technically equivalent to and reproduced from IEC 60335-2-75:1995.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 32 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3350.2.75:2001
AS/NZS 3350.2.76:1998
AS/NZS 3350.2.78:1996
AS/NZS 3350.2.79:2001
AS/NZS 3350.2.80:1998
AS/NZS 3350.2.81:1998
Specifies safety requirements for foot warmers and heating mats. This Standard is technically equivalent to and has been
reproduced from IEC 60335-2-81:1997.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 17 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Safety of household and similar electrical appliances - Particular requirements - Service
machines and amusement machines
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-82:1999.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 15 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3350.2.82:2000
Safety of household and similar electrical appliances - Particular requirements - Drives for
vertically moving garage doors for residential use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-95:1998.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3350.2.95:2000
Safety of household and similar electrical appliances - Particular requirements - Drives for
rolling shutters, awnings, blinds and similar equipment
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 3350.1:1994.
This Standard is an adoption with national modifications and contains the full text of IEC 60335-2-97:1998.
Reprinted to incorporate Amendment 1:2001 and Amendment 2:2007
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 13 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3350.2.97:2000
AS/NZS 3350.2.98:1998
NZS/BS 3395:1989
(Withdrawn)
NZS 3401:1995
(Withdrawn)
NZS 3402:1989
NZS 3403:1978
(Withdrawn)
NZS 3422:1975
AS/NZS 3439.1:2002
AS/NZS 3439.2:2002
AS/NZS 3439.3:2002
Low-voltage switchgear and controlgear assemblies - Particular requirements for lowvoltage switchgear and controlgear assemblies intended to be installed in places where
unskilled persons have access for their use - Distribution boards
Specifies supplementary requirements to AS/NZS 3429.1 for enclosed distribution boards containing protective devices and intended
for installation in places where unskilled persons have access for their use. Reproduced from IEC 60439-3 consolidated edition 1.2,
which incorporates its Amendment 1:1993 and amendment 2:2001 into IEC 60439-3:1990. Contains variations for Australian and
New Zealand conditions.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 22 pages
NZS 3441:1978
(Withdrawn)
Specification for road and rail tanker hoses and hose assemblies for petroleum products,
including aviation fuels
Eight types of hoses for conveying gasoline fuels and oils, including aviation fuels having an aromatic hydrocarbon content of not
more than 50%, at temperatures up to 80 degrees C and a vacuum not exceeding 500 mbar.
Adopted Standard
$96.00+GST (Members), $120.00+GST (Retail), 12 pages
NZS/BS 3492:1987
AS/NZS 3499:2006
Water supply - Flexible hose assemblies
Specifies requirements for flexible hose assemblies for use with both heated water and cold-water supplies with a maximum heated
water temperature of 90C used for applications aboveground, accessible and not submerged. Nominal sizes range up to DN 20, a
maximum length of 2 m and with a working pressure not exceeding 1.4 MPa at 20C.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Plumbing and drainage - Glossary of terms
AS/NZS 3500.0:2003
This Standard is intended for use in the interpretation of terminology used in the various parts of the Plumbing and Drainage series
of Standards.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 66 pages
Plumbing and drainage - Water services
AS/NZS 3500.1:2003
This Standard sets out the requirements for the installation of water services from the point of connection to the Network Utility's
water supply or from an alternative drinking water supply to the points of discharge. This Standard applies to new installations as well
as alterations, additions and repairs to existing installations.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2010
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 111 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2010 $46.40+GST (Members), $58.00+GST (Retail)
Plumbing and drainage - Sanitary plumbing and drainage
AS/NZS 3500.2:2003
This Standard specifies the requirements for the design and installation of sanitary plumbing and drainage from the fixtures to a
sewer, common effluent system or an on-site wastewater management system, as appropriate. The Standard applies to new
installations as well as alterations, additions or repairs to existing installations. Illustrations used in this Standard are diagrammatic
only and have been chosen without prejudice. NOTE: The pre-treatment of trade wastes is not specified in this Standard.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 152 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2010 $46.40+GST (Members), $58.00+GST (Retail)
Amendment 4, 2011 $33.60+GST (Members), $42.00+GST (Retail)
Plumbing and drainage - Stormwater drainage
AS/NZS 3500.3:2003
Provides criteria for materials, design, installation and testing of roof drainage systems, surface drainage systems and subsoil
drainage systems to a point of connection.
Reprinted to incorporate Amendment 1:2006, Amendment 2:2010, and Amendment 3:2012
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 184 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2010 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Plumbing and drainage - Part 4: Heated water services
AS/NZS 3500.4:2003
This Standard sets out the requirements for the design and installation of heated water services. It includes aspects of the installation
from, and including, the valve(s) on the cold water inlet to any cold water storage tank or water heater and the downstream fixtures
and fittings.
Reprinted to append Amendment 1:2005 and Amendment 2:2010
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 125 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2010 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3500.5:2000
Specifies the requirements for the installation of hot and cold water supply, sanitary plumbing and drainage, and stormwater
drainage, for domestic plumbing work associated with buildings not exceeding three floors in height.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 275 pages
Amendment 1, 2002 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2004 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 4, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Specification for copper tubes for water, gas, and sanitation
NZS 3501:1976
Specifies chemical composition, mechanical properties and dimensions for tubes of 10 to 300 mm nominal bore. Dimensionally
compatible with superseded Imperial range.
Reprinted to append Amendments 1, 2 & 3
$46.40+GST (Members), $58.00+GST (Retail), 13 pages
Amendment 1, 1983 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 1987 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 1987 $33.60+GST (Members), $42.00+GST (Retail)
NZS 3502:1976
(Withdrawn)
AS/NZS 3512:2000
Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure
applications
Specifies performance requirements for ABS compounds (ABS 120, ABS 140 and ABS 160), pipes and fittings for the conveyance of
liquids under pressure in applications above and below ground.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 44 pages
AS/NZS 3518:2004
NZS/BS 3551:1962
(Withdrawn)
NZS/AS 3563.1:1991
(Withdrawn)
NZS/AS 3563.2:1991
(Withdrawn)
NZS/AS 3566:1988
(Withdrawn)
Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for
determining the ultimate tensile strength and unit modulus of flat laminates
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 3572.18:1997
Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the
determination of the lap shear strength of laminate
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 3572.19:1997
Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the
determination of the peel strength of the bond between laminate layers
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 3572.20:1997
AS/NZS 3572.21:1997
Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the
determination of the shear strength of a sandwich panel
Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the
determination of the initial longitudinal tensile strength by means of a tensile plate test
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 3572.23:1997
Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the
determination of the initial hoop tensile strength by means of a tensile plate test
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 3572.24:1997
Clearing saws, brushcutters and grass trimmers - Guide to safe working practices
AS/NZS 3576:1998
Provides recommendations for the safe use of clearing saws, brushcutters and grass trimmers. Guidelines are given covering the
basic principles for the safe operation of the equipment, the training of operators, the appropriate measures and precautions to take
to guard the safety and health of operators, and the general maintenance of the equipment.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Methods for sampling and analysis of ambient air - Guide to siting air monitoring
equipment
Sets out general guidelines to the siting of air monitoring equipment and specifies a number of siting parameters for individual air
pollutants. The Standard does not include the detailed design of a network of monitoring units.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 24 pages
AS/NZS 3580.1.1:2007
Methods for sampling and analysis of ambient air - Preparation of reference test
atmospheres - Compressed gas method
Sets out a method for the preparation of reference test atmospheres containing known concentrations of determinand(s), using a
calibration gas dilution method. The method is applicable to components that do not react with each other, the cylinder walls or the
dilution gas, and that remain totally vaporized in the cylinder at all pressures and temperatures anticipated during the preparation
and use of the reference test atmosphere.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
AS/NZS 3580.2.2:2009
Methods for sampling and analysis of ambient air - Determination of suspended particulate
matter - Total suspended particulate matter (TSP) - High volume sampler gravimetric
method
Specifies a gravimetric method for the determination of suspended particulate matter in ambient air. The method provides a
measure of mean concentration of TSP over the sampling period employed.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 15 pages
AS/NZS 3580.9.3:2003
Methods for sampling and analysis of ambient air - Determination of suspended particulate
matter - PM10 high volume sampler with size selective inlet - Gravimetric method
Specifies a gravimetric method for the determination of suspended particulate matter in ambient air. The method provides a measure
of mean concentration of PM10 over the sampling period employed.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 19 pages
AS/NZS 3580.9.6:2003
AS/NZS 3580.9.7:2009
Methods for sampling and analysis of ambient air - Determination of suspended particulate
matter - Dichotomous sampler (PM10, coarse PM and PM2.5) - Gravimetric method
Sets out a gravimetric procedure for the concurrent determination of the PM10 and PM2.5 fractions of suspended particulate matter in
ambient air collected in a dichotomous sampler. The method provides a measure of the mean concentration of PM10 over the
sampling period of the two size fractions, viz. the fine fraction (less than approximately 2.5 m) and the coarse fraction (2.5 m to 10
m). A procedure for assessing the performance of dichotomous samplers so that they comply with the sampling requirements of
this method, is described in Appendix A.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
Methods for sampling and analysis of ambient air - Determination of suspended particulate
matter - PM10 low volume sampler - Gravimetric method
Provides regulatory and testing bodies with a standard method for determining suspended particulate matter with an equivalent
aerodynamic diameter of less than 10 m utilizing a low volume sampler and size selective inlet.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 3580.9.9:2006
Methods for sampling and analysis of ambient air - Determination of suspended particulate
matter - PM2.5 low volume sampler - Gravimetric method
Sets out a standard method for determining suspended particulate matter with an equivalent aerodynamic diameter of less than 2.5
micrometre utilizing a low volume sampler and size selective inlet.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 3580.9.10:2006
Methods for sampling and analysis of ambient air - Determination of suspended particulate
matter - PM10 beta attenuation monitors
Provides regulatory and testing bodies with a method for continuously monitoring suspended particulate matter changes of particles
less than 10 micrometres in ambient air, providing near real time measurement of mean particle concentration.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3580.9.11:2008
Methods for sampling and analysis of ambient air - Determination of particulate matter Deposited matter - Gravimetric method
Sets out a method for the sampling of particulate matter that is deposited from the atmosphere, and procedures for the gravimetric
determination of the mass deposition rate of insoluble solids, ash, combustible matter, soluble solids and total solids from ambient
air.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 10 pages
AS/NZS 3580.10.1:2003
Methods for sampling and analysis of ambient air - Determination of light scattering Integrating nephelometer method
Specifies a continuous direct reading instrumental method of determining light scattering produced by fine particles in a sample of
ambient air. The light scattering coefficient determined by this Standard is an indicator of the perceived visual degradation caused by
suspended particles in air. The method is not designed to measure light scattering due to suspended water droplets.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 10 pages
AS/NZS 3580.12.1:2001
Supplementary cementitious materials for use with portland and blended cement Amorphous silica
Sets out requirements for amorphous silica as a supplementary material for use in concrete, mortar and grout.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 10 pages
AS/NZS 3582.3:2002
Diesel engine systems for underground coal mines - Fire protected - Heavy duty
AS/NZS 3584.1:2008
Specifies safety requirements for diesel engine systems that are fire protected for use in designated safe areas in underground coal
mines. It applies to diesel engine systems with heavy duty applications.
Energy Audits
AS/NZS 3598:2000
Assists energy users to decide what level of audit is appropriate for their needs, providing a guide when commissioning energy
audits and a uniform basis for preparing and comparing energy audit proposals. It also aims to establish best practice for energy
auditors, support the establishment of energy management programs and contribute to the quality of existing energy and other
management systems.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and
12.7/22(24) kV - Metallic screened
Specifies the construction, dimensions, and test requirements for steel wire supported, three-core aerial bundled cable, having
individually screened phase cables insulated with cross-linked polyethylene, sheathed with high density polyethylene.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 19 pages
AS/NZS 3599.1:2003
AS/NZS 3599.2:1999
NZMP 3600.1:1992
NZS/BS 3601:1987
Specification for carbon steel pipes and tubes with specified room temperature properties
for pressure purposes
Plain end, welded and seamless carbon steel tubes suitable for general purposes.
Adopted Standard
$156.00+GST (Members), $195.00+GST (Retail), 16 pages
Timber and wood-based products for use in building
NZS 3602:2003
This Standard gives the requirements for timber and wood-based products for particular uses in building so that they can be
expected to give acceptable performance during the life of the building. To that end this Standard covers the materials themselves
and aspects of design and construction that are relevant to their performance in use.
$136.80+GST (Members), $171.00+GST (Retail), 44 pages
Timber Structures Standard
NZS 3603:1993
Sets out in limit state design format the requirements for methods of design of timber elements of buildings and applies specifically to
sawn timber, glue laminated timber, natural round timber and construction plywood. Includes a section on design for fire resistance.
Amendments 1, 2 & 4 appended
$167.20+GST (Members), $209.00+GST (Retail), 132 pages
Amendment 1, 1996 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 1996 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 4, 2005 $46.40+GST (Members), $58.00+GST (Retail)
Timber-framed buildings
NZS 3604:2011
Provides methods and details for the design and construction of timber-framed structures not requiring specific engineering design.
This Standard applies to residential buildings up to three-storeys high including multi-residential buildings, some commercial
buildings and freestanding, uninhabited garages.
NZS 3604:1999 continues to be referenced in the New Zealand Building Code until the Department of Building and Housing has
referenced the 2011 edition in the Compliance Document, B1. Referencing is intended in mid 2011.
$235.20+GST (Members), $294.00+GST (Retail), 446 pages
Timber-framed buildings set comprising Hardcopy and CD-ROM
NZS 3604:2011 Set
Provides methods and details for the design and construction of timber-framed structures not requiring specific engineering design.
This Standard applies to residential buildings up to three-storeys high including multi-residential buildings, some commercial
buildings and freestanding, uninhabited garages. Includes hardcopy and CD-ROM versions of this Standard.
$392.00+GST (Members), $490.00+GST (Retail), 446 pages
Timber-framed buildings - Selected extracts from NZS 3604:2011
SNZ HB 3604:2011
Provides users with a collection of figures and tables extracted from NZS 3604:2011 that are commonly used on-site. The Handbook
directs users to the appropriate section of the Standard for full information. SNZ HB 3604:2011 has been designed as an on-site
reference guide. The development committee advises it must not be used as a substitute for the full Standard, NZS 3604:2011.
Users of SNZ HB 3604 should always refer to the full Standard when they require detailed and complete information. Hard copies of
SNZ HB 3604 are provided in polypropylene covers with a magnetic strip closure and 2-hole lever arch mechanism for easy updating
of pages. Pages have been printed on heavier weight thin-laminated paper for durability.
$152.80+GST (Members), $191.00+GST (Retail), 212 pages
Information technology - Telecommunications and information exchange between systems
- Use of X.25 to provide the OSI connection-mode network service
Provides a mapping between the abstract primitives and parameters of the connection oriented network service and the real
elements of the X.25 packet layer protocol. This standard is identical to and reproduced from ISO/IEC 8878:1992.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 92 pages
AS/NZS 3604:1994
(Superseded by AS/NZS 1859.1:1996 (in part) and AS/NZS 1859.2:1996 (in part))
(Superseded by AS/NZS 2098 Parts 1 to 8:1996, AS/NZS 2271:1999 and AS/NZS 2269:1994)
NZS 3612:1970
(Superseded by AS/NZS 2098 Parts 1 to 8:1996, AS/NZS 2271:1999 and AS/NZS 2269:1994)
AS/NZS 3612:1994
NZS 3613:1970
NZS 3614:1971
NZS 3616:1978
Sets out the requirements to be met by timber mechanically stress graded for bending strength and stiffness in compliance with this
Standard. Lists a range of standard stress grades and requires the grading machine to be capable of producing at least one of these.
Deals with the approval and verification of stress grading machines, and lays down quality assurance and control procedures which
shall be met before compliance with the Standard is claimed.
Superseded in part by AS/NZS 1748:1997 but remains Current
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Information technology - Telecommunications and information exchange between systems
- Start-stop transmission signal quality at DTE/DCE interfaces
Specifies signal quality requirements for serial data transmission at the interface between start-stop transmission data terminal
equipment and data circuit-terminating equipment. This standard is identical to and reproduced from ISO/IEC 7480:1991.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
AS/NZS 3618:1993
(Withdrawn)
NZS 3621:1987
Information technology - Data communications - X.25 packet layer protocol for data
terminal equipment
Specifies the procedures, format and facilities at the packet layer for data terminal equipment operating in conformance with ITU-T
Recommendation X.25. This Standard is identical with and has been reproduced from ISO/IEC 8208:1995.
Joint Australian/New Zealand Standard
$200.00+GST (Members), $250.00+GST (Retail), 170 pages
AS/NZS 3621:2000
(Withdrawn)
AS/NZS 3629.3:1997
Sets the method of determining the dynamic performance of the upper anchorage components of child restraint systems by testing
the straps separately from other parts of the child restraint system.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Methods of testing child restraints - Method 4: Determination of the force required to adjust
a harness
Sets out the method of determining the force required to adjust the harness of a child restraint to fit the child occupant.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 3629.4:1997
AS/NZS 3629.5:1995
AS/NZS 3629.9:2010
NZMP 3640:1992
NZS/BS 3643.1:1981
(Withdrawn)
NZS/BS 3643.2:1981
(Withdrawn)
Computer graphics - Initial Graphics Exchange Specification (IGES) for digital exchange of
product definition data - General
Specifies information structures to be used for the digital representation and communication of product definition data. Use of this
Standard permits the compatible exchange of data of product definition data used by various computer-aided design and computeraided manufacturing (CAD/CAM) systems. It is identical with and has been reproduced from the US Department of Commerce
National Bureau of Standards Initial Graphics Exchange Specification (IGES) Version 4.0-1988.
Adopted Standard
$293.05+GST (Members), $366.31+GST (Retail), 516 pages
NZS/AS 3643.1:1989
AS/NZS 3646.1:1993
AS/NZS 3646.1 Supplement 1:1995 Information processing systems - Open Systems Interconnection - File transfer,
access and management - General introduction - Overlapped access
Extends the service definition of FTAM to incorporate the services offered by overlapped access.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 11 pages
AS/NZS 3646.2 Supplement 1:1995 Information processing systems - Open Systems Interconnection - File transfer,
access and management - Virtual filestore definition - Overlapped access
Extends the definitions of the abstract model of the virtual filestore to incorporate the concepts of overlapped access.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Information processing systems - Open Systems Interconnection - File transfer, access
and management - File service definition
Defines in an abstract way the visible file transfer, access and management service within the OSI application layer in terms of the
primitive actions and events of the device, the parameter data associated with each primitive action and events of the device, the
parameter data associated with each primitive action and event and their inter-relationship. This standard is identical to and
reproduced from ISO 8571-3:1988.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 166 pages
AS/NZS 3646.3:1993
AS/NZS 3646.3 Supplement 1:1995 Information processing systems - Open Systems Interconnection - File transfer,
access and management - File service definition - Overlapped access
Extends the file transfer access management service definition to include overlapped access. This standard is identical to and
reproduced from ISO 8571-3:1988.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 80 pages
Information processing systems - Open Systems Interconnection - File transfer, access
and management - File protocol specification
Defines the basic protocol which supports the internal file service, and the error recovery protocol which supports the external file
service. This standard is identical to and reproduced from ISO 8571-4:1988.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 212 pages
AS/NZS 3646.4:1993
AS/NZS 3646.4 Supplement 1:1995 Information processing systems - Open Systems Interconnection - File transfer,
access and management - File protocol specification - Overlapped access
Extends the file protocol specifications to support the services offered by overlapped access. This standard is identical to and
reproduced from ISO 8571-4:1988.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 96 pages
Information processing systems - Open Systems Interconnection - File transfer, access
and management - Protocol implementation conformance statement proforma
Defines a protocol implementation conformance statement (PICS) proforma for the detailed expression of the conformance
requirements of AS 3646. This standard is identical to and reproduced from ISO/IEC 8571-5:1990.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 37 pages
AS/NZS 3646.5:1994
NZS/AS 3650:1988
(Withdrawn)
AS/NZS 3651:1994
Specifies a protocol which is used by network layer entities operating in end systems and intermediate systems to maintain routing
information. This standard is identical with and reproduced from ISO 9542:1988.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 31 pages
AS/NZS 3652(Int):1998
AS/NZS 3654:1996
AS/NZS 3661.1:1993
Slip resistance of pedestrian surfaces - Part 2: Guide to the reduction of slip hazards
AS/NZS 3661.2:1994
Provides guidance on the selection, installation, care and maintenance of pedestrian surfaces in domestic, commercial and public
areas for the purpose of reducing slip hazards. It is not applicable to special industrial situations.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 12 pages
Performance of showers for bathing
AS/NZS 3662:2005
Specifies the requirements for showers for bathing purposes.
Reprinted to incorporate Amendments 1, 2 and 3
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 32 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2010 $33.60+GST (Members), $42.00+GST (Retail)
Air-handling and water systems of buildings - Microbial control - Part 1: Design,
installation and commissioning
Specifies minimum requirements for the design, installation and commissioning of air-handling and water systems of buildings for the
purposes of microbial control. It does not include requirements for refrigerated room airconditioners and nonducted split systems.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
AS/NZS 3666.1:2011
Air-handling and water systems of buildings - Microbial control - Part 2: Operation and
maintenance
Specifies minimum requirements for the design, installation and commissioning of air-handling and water systems of buildings for the
purposes of microbial control. It does not include requirements for refrigerated room airconditioners and nonducted split systems.
This Standard is to assist users in the control of microorganisms in building systems, particularly those associated with legionnaires
disease, pontiac fever, hypersensitivity pneumonitis and humidifier fever.
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 16 pages
AS/NZS 3666.2:2011
Air-handling and water systems of buildings - Microbial control - Part 3: Performancebased maintenance of cooling water systems
Outlines a performance-based approach to the maintenance of cooling water systems with respect to the control of microorganisms,
including legionellae, within such systems. This approach combines automatically regulated water treatment with monitoring,
assessment and control strategies to help create a low risk environment within the cooling water system.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
AS/NZS 3666.3:2011
AS/NZS 3666.4:2011
Air-handling and water systems of buildings - Microbial control - Part 4: Performancebased maintenance of air-handling systems (ducts and components)
Outlines a performance-based approach to the maintenance of ducts and components forming air-handling systems with respect to
the control of microorganisms, within such systems. This approach is based on known risk factors combined with maintenance
practices and compliance monitoring to create hygienic conditions within such systems of buildings.
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 20 pages
Conductors - Covered overhead - For working voltages 6.35/11 (12) kV up to and including
19/33 (36) kV
Specifies the construction, dimensions and test requirements for water blocked covered conductors, suitable for overhead lines.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 31 pages
AS/NZS 3675:2002
AS/NZS 3682:1994
AS/NZS 3687:1993
(Withdrawn)
AS/NZS 3695.1:2011
Wheelchairs - Part 1: Requirements and test methods for manual wheelchairs
Specifies requirements and test methods for manual wheelchairs intended to carry one person. This Standard does not apply to, but
elements may be relevant for, wheelchairs designed for special purposes, such as sports wheelchairs, custom-made wheelchairs,
stand-up wheelchairs, and add-on power kits for the propulsion of manual wheelchairs.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 36 pages
Wheelchairs - Determination of static stability
AS/NZS 3696.1:2008
Specifies the test methods for determining the static tipping stability of wheelchairs, including scooters. Identical to ISO 71761:1999.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
Wheelchairs - Determination of dynamic stability of electric wheelchairs
AS/NZS 3696.2:2008
Provides a method for determining the dynamic stability of electrically powered wheelchairs, for the use of manufacturers, testing
authorities and purchasers. Identical to ISO 7176-2:2001.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
Wheelchairs - Determination of effectiveness of brakes
AS/NZS 3696.3:2008
Provides a suitable test for the determination of the effectiveness of brakes on manual and electrically powered wheelchairs.
Identical to ISO 7176-3:2003.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Wheelchairs - Requirements and test methods for static, impact and fatigue strengths
AS/NZS 3696.8:1998
Specifies strength requirements for wheelchairs including scooters intended for users whose mass does not exceed 100 kg. This
Standard is technically equivalent to and has been reproduced from ISO/FDIS 7176-8:1997.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 57 pages
Wheelchairs - Climatic tests for electric wheelchairs
AS/NZS 3696.9:2008
Provides a suitable test for the determination of the effects of various climatic conditions on electrically powered wheelchairs.
Adopted from ISO 7176-9:2001, with national modifications.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Wheelchairs - Power and control systems for electric wheelchairs - Requirements and test
methods
Specifies requirements and test methods for power and control systems of electric wheelchairs (including scooters). Includes
vehicles with built-in battery chargers. This Standard is based on but not equivalent to and has been reproduced from ISO 717614:1997.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 35 pages
AS/NZS 3696.14:1998
AS/NZS 3697:1994
AS/NZS 3698:1994
(Withdrawn)
NZS/BS 3704:1989
(Withdrawn)
AS/NZS 3711.2:1993
Defines terms relating to freight containers, including types, characteristics, components and structures.
Reprinted to incorporate Amendment 1:2000
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 14 pages
Amendment 1, 2000 $33.60+GST (Members), $42.00+GST (Retail)
Freight containers - Corner fittings
AS/NZS 3711.3:1993
Specifies the basic dimensions and the functional and strength requirements of corner fittings for Series 1 and Series R freight
containers.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 24 pages
Freight containers - General purpose containers
AS/NZS 3711.4:1993
Specifies the basic requirements for the specification and testing of Series 1 and Series R freight containers of the totally enclosed
general purpose types (closed, vented, ventilated or open top), which are suitable for international exchange and for conveyance by
road, rail and sea, including interchange between these forms of transport.
Reprinted to incorporate Amendment 1:2000
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 29 pages
Amendment 1, 2000 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3711.5:1993
(Withdrawn)
AS/NZS 3711.6:1993
(Withdrawn)
(Withdrawn)
AS/NZS 3711.9:1993
(Withdrawn)
AS/NZS 3711.10:1993
(Withdrawn)
Specifies methods, and provides data, for calculating the vertical working loads on buried concrete pipes due to the materials
covering the pipes and superimposed loads. Also specifies methods for relating the minimum proof test load to the calculated vertical
working loads on concrete pipes installed under particular conditions, including that of combined vertical load plus internal pressure.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 48 pages
Design for installation of buried concrete pipes Commentary
AS/NZS 3725 Supplement 1:2007
Gives additional guidance and commentary to AS/NZS 3725:2007. The Standard provides an agreed basis for determining the
vertical working loads on installed steel-reinforced, fibre-reinforced and unreinforced concrete pipes and a range of installation
conditions.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 52 pages
Textile floor coverings - Cleaning and maintenance of residential and commercial carpeting
AS/NZS 3733:1995
Provides requirements for various cleaning techniques and recommendations for the establishment of maintenance programs for
carpets in residential and commercial situations to achieve maximum appearance retention and wear life, and to minimize possible
hazards to health from poorly maintained carpets. Also provides requirements for cleaning chemicals to cover their known effects on
new generation carpets, requirements for vacuum cleaner filtration, and recommendations for disposal of extracted cleaning wastes.
Includes a useful guide to stain removal.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 39 pages
Furniture - Assessment of the ignitability of upholstered furniture - Ignition source Smouldering cigarette
This Standard is technically equivalent to and has been reproduced from ISO 8191.1:1987.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
AS/NZS 3744.1:1998
Furniture - Assessment of the ignitability of upholstered furniture - Ignition source - Matchflame equivalent
This Standard is technically equivalent to and has been reproduced from ISO 8191.2:1988.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
AS/NZS 3744.2:1998
Furniture - Assessment of the ignitability of upholstered furniture - Ignition sources Nominal 160 mL/min gas flame and nominal 350 mL/min gas flame
Sets out the method to be employed in assessing the ignitability of actual combinations of upholstered seating materials when
subjected to gas flaming ignition sources.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 3744.3:1998
NZS/AS 3747:1989
(Withdrawn)
Paints for steel structures - Etch primers (single pack and two-pack)
AS/NZS 3750.17:1998
Specifies requirements for single pack etch primers (Type 1) and two-pack etch primers (Type 2) intended for pretreating metal
surfaces to improve the adhesion of paint systems applied to them.
Joint Australian/New Zealand Standard
(Withdrawn)
NZS/ISO 3767.2:1991
(Withdrawn)
(Withdrawn)
(Withdrawn)
NZMP 3801:1972
(Withdrawn)
Such meaning will be determined by the context of the application. This Standard does not cover dates and times where words are
used in the representation. This standard is technically identical with and reproduced from ISO 8601:1988 including Corrigendum
1:1991.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 15 pages
Compliance programmes
NZS/AS 3806-2006
Provides guidance on the principles of effective management of an organisations compliance with its legal obligations, as well as any
other relevant obligations such as industry and organisational standards, principles of good governance and accepted community
and ethical norms. The principles cover commitment to achieving compliance, implementation of a compliance programme,
monitoring and measuring of compliance, as well as continual improvement.
Adopted Standard
$73.60+GST (Members), $92.00+GST (Retail), 31 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Insulating and sheathing materials for electric cables
AS/NZS 3808:2000
Specifies the tests and criteria, referenced in particular Standards, for elastomeric, PVC, reduced fire hazard and polyolefin
insulating and sheathing materials used in the construction of electric cables and flexible cords. It does not cover tests that can only
be conducted on completed cables.
Reprinted to append Amendment 2:2004
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 22 pages
Amendment 1, 2002 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2004 $33.60+GST (Members), $42.00+GST (Retail)
Safes and strongrooms
AS/NZS 3809:1998
Specifies performance requirements and procedures for testing secure storage units of the type intended for use in commercial,
industrial, mercantile, financial and insurance institutions, and the like, and that are relied upon to protect the contents from intrusion
and forced removal. The secure storage units include free-standing safes, built-in safes (floor and wall), strongroom doors and
strongrooms (with or without a door). This Standard excludes electronic packages (other than electronic locks) and other devices
that may be attached to the secure storage unit or vault. These requirements are intended to establish the resistance to forced
removal and intrusion resistant rating of secure storage units according to attack by prescribed tools. This Standard does not cover
tests for fire resistance.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 23 pages
Safes and strongrooms - Methods of test - Introduction and list of methods
AS/NZS 3810.0:1998
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 1 page
Safes and strongrooms - Methods of test - Test for physical attack
AS/NZS 3810.1:1998
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
Safes and strongrooms - Methods of test - Test for anchoring strength
AS/NZS 3810.2:1998
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Safes and strongrooms - Methods of test - Test for explosive resistance
AS/NZS 3810.3:1998
Specifies the method to be applied when testing secure storage units for explosive designation (EX). This is an optional test.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Plastic monobloc chairs
AS/NZS 3813:1998
Specifies strength, durability and stability as well as marking requirements for plastic monobloc chairs. This Standard was developed
by the Plastics and Chemicals Industry Association in conjunction with the now Australasian Furnishing Research and Development
Institute.
Acoustics - Methods for the description and physical measurement of single impulses or
series of impulses
Describes preferred methods for the description and the physical measurement of single impulsive sounds or short series of
impulsive sounds and for the presentation of the data. It does not provide methods for interpreting the potential effects of series of
impulses of noise on hearing, community response or structures. This Standard is identical with and has been reproduced from ISO
10843:1997.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 23 pages
AS/NZS 3817:1998
AS/NZS 3821:1998
Performance of electrical appliances - Airconditioners and heat pumps - Part 1.1: Nonducted airconditioners and heat pumps - Testing and rating for performance
Specifies the standard conditions for capacity and efficiency ratings of non-ducted air-cooled air conditioners and non-ducted air to
air heat pumps. This Standard is applicable to ducted units rated at less than 8 kW and intended to operate at an external static
pressure of less than 25 Pa. This International Standard also specifies the test methods for determining the capacity and efficiency
ratings. Adopted with national modifications from ISO 5151:2010.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 84 pages
AS/NZS 3823.1.1.2012
Performance of electrical appliances - Airconditioners and heat pumps - Part 1.2: Ducted
airconditioners and air-to-air heat pumps - Testing and rating for performance
Specifies the standard conditions for capacity and efficiency ratings of ducted, air-cooled air-conditioners and ducted air-to-air heat
pumps. This Standard is applicable to the test methods for determining the capacity and efficiency ratings. Residential, commercial,
and industrial single-package and split-system air-conditioners and heat pumps are included. The equipment (taken to mean ducted
air-conditioners and/or ducted heat pumps) shall be factory-made and electrically driven, and shall use mechanical compression.
Adopted with national modifications from ISO 13253:2011.
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 100 pages
AS/NZS 3823.1.2.2012
AS/NZS 3823.2:2011
Quality requirements for fusion welding of metallic materials - Criteria for the selection of
the appropriate level of quality requirements
Provides a general outline of AS/NZS ISO 3834 and criteria to be taken into account for the selection of the appropriate level of
quality requirements for fusion welding of metallic materials, among the three levels specified in AS/NZS ISO 3834 Parts 2, 3 and 4.
It applies to manufacturing, both in workshops and at field installation sites. Identical to ISO 3834-1, Ed. 2.0 (2005).
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 20 pages
AS/NZS ISO 3834.1:2008
Quality requirements for fusion welding of metallic materials - Documents with which it is
necessary to conform to claim conformity to the quality requirements of AS/NZS ISO
3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4
Specifies the documents with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834-2,
AS/NZS ISO 3834-3 or AS/NZS ISO 3834-4. It can only be used in conjunction with AS/NZS ISO 3834-2, AS/NZS ISO 3834-3 or
AS/NZS ISO 3834-4. Identical to ISO 3834-5, Ed. 1.0 (2005).
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 20 pages
Earth potential rise - Protection of telecommunications network users, personnel and plant
- Code of practice
Specifies requirements and code of practice to minimize hazards due to earth potential rise for the protection of telecommunications
network users, personnel and plant.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 44 pages
AS/NZS 3835.1:2006
Earth potential rise - Protection of telecommunications network users, personnel and plant
- Application guide
Specifies recommendation and code of practice for the application of the EPR Code of practice for the protection of persons or plant
prescribed in AS/NZS 3835.1.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 44 pages
AS/NZS 3835.2:2006
Method of test for heat and smoke release rates for materials and products using an
oxygen consumption calorimeter
Sets out a test method for the determination of ignitability, heat release rates, mass loss rates, effective heat of combustion and
smoke release of materials and products when exposed to controlled levels of radiant heating.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 52 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 3837:1998
AS/NZS 3841:1998
Guide 65: General requirements for bodies operating product certification systems
AS/NZS 3843:1998
Provides general requirements for bodies operating a system for third-party product certification (which may include a process or
service) as a means of assurance that the system complies with specified Standards and other normative documents. This Standard
is identical with and has been reproduced from ISO/IEC Guide 65:1996. (Also published as Handbook SAA/SNZ HB18.65:1998.)
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
(Withdrawn)
NZS/ISO 3874:1988
Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes
and fittings
Specifies requirements for solvent cements and priming fluids used in the jointing of polyvinyl chloride (PVC-U and PVC-M) and
acrylonitrile butadiene styrene (ABS) pressure and non-pressure piping systems, and ABS and acrylonitrile styrene acrylate (ASA)
fittings for non-pressure drainage applications with PVC-U pipes.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 36 pages
AS/NZS 3879:2011
AS/NZS 3894.0:1996
(Withdrawn)
AS/NZS 3894.5:1995
(Withdrawn)
AS/NZS 3894.6:1996
(Withdrawn)
AS/NZS 3894.7:1996
(Withdrawn)
AS/NZS 3894.8:1996
(Withdrawn)
AS/NZS 3905.4:1995
Quality system guidelines - Guide to quality system Standards AS/NZS ISO 9001:1994 and
AS/NZS ISO 9002:1994 for the pressure equipment industry
Provides guidance to the pressure equipment industry on the application of quality system Standards AS/NZS ISO 9001:1994 and
AS/NZS ISO 9002:1994. The application of each requirement is explained in terms understood in the industry. Typical examples are
included to assist in understanding the requirements.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 35 pages
AS/NZS 3905.5:1995
(Withdrawn)
AS/NZS 3905.6:1995
(Withdrawn)
Quality system guidelines - Guide to AS/NZS ISO 9001:1994 for the road freight transport
industry
This Standard provides guidance for the road freight transport industry on the application of quality system Standard AS/NZS ISO
9001:1994. The application of various quality system elements is described in terms understood in the industry and typical examples
are included.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 57 pages
AS/NZS 3905.7:1995
AS/NZS 3905.8:1996
(Withdrawn)
Quality system guidelines - Guide to AS/NZS ISO 9001:1994 for architectural and
engineering design practices
Provides guidance on the application of AS/NZS ISO 9001 to architectural and engineering design practices, and similar designers
and consultants practising in the construction industry. It includes guidance on the development of effective quality systems for use
within a practice.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 64 pages
AS/NZS 3905.12:1999
AS/NZS 3905.13:1998
AS/NZS 3905.14:1998
(Withdrawn)
(Withdrawn)
Engineer, however, it may also be suitable for contract works for which the Contractor, wholly or partly, has design responsibility.
Also includes conditions of tender and forms for special conditions, contract agreement and bonds for contractors and principals.
Sets out the contractual relationship between a client and the Contractor and defines their rights, obligations and communications.
Insurance forms are included for the purpose of providing outlines of the insurance cover that is provided for a contract. A range of
disputes resolution procedures are provided. Payment processes are prescribed that comply with the Construction Contracts Act
2002. Includes on a CD ROM copies of the forms and schedules that may be completed with project specific details and a read-only,
searchable and hyperlinked copy of the standard.
Each party to the contract must purchase a copy of this standard.
$62.40+GST (Members), $78.00+GST (Retail), 111 pages
NZMP 3911:1992
NZS/ISO 3912:1977
(Withdrawn)
NZMP 3912:1992
AS/NZS 3913:1992
(Withdrawn)
NZMP 3914:1994
Conditions of contract for building and civil engineering construction (where no person is
appointed to act as engineer to the contract)
Provides a New Zealand standard contract form in plain English, for incorporation in building and construction contract documents, in
situations where the client (Principal) administers the contract directly. Also includes conditions of tender and forms for special
conditions, contract agreement and bonds for contractors and principals. Provides a range of disputes resolution procedures. The
intent and content of this Standard has been aligned with NZS 3910:2003 and the provisions to the Construction Contracts Act 2002.
Each party to the contract must purchase a copy of this standard.
$68.80+GST (Members), $86.00+GST (Retail), 120 pages
NZS 3915:2005
(Withdrawn)
BS 3941:1975
(Withdrawn)
(Withdrawn)
AS/NZS 3947.2:2002
(Withdrawn)
AS/NZS 3947.3:2001
Applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor
circuits of which the rated voltage does not exceed 1000 V a.c. or 1500 V d.c. Specifies characteristics of equipment, conditions with
which the equipment shall comply with reference to operation and behaviour in normal service and specified abnormal conditions
and dielectric properties, tests for confirming that these conditions have been met and the methods to be adopted for these tests and
the information to be marked on the equipment or supplied by the manufacturer. This Standard is identical to and reproduced from
IEC 60947-3:1999 and includes variations made to this document by its Corrigendum:1999/07 and Amendment 1:2001.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 47 pages
AS/NZS 3947.3 Supplement 1:2001 Low-voltage switchgear and controlgear - Switches, disconnectors, switchdisconnectors and fuse-combination units - Fuse-switch-disconnectors and switchdisconnectors for use with low-voltage aerial bundled cables (Supplement to AS/NZS
3947.3:2001)
Specifies requirements for fuse-switch-disconnectors and switch-disconnectors for use with low-voltage aerial bundled cable
systems in distribution circuits with a rated voltage of 400 V a.c. line to line. It is closely aligned with the requirements of AS/NZS
3947.1 and based on AS/NZS 3947.3.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
AS/NZS 3947.4.1:2001
(Withdrawn)
AS/NZS 3947.4.2:2000
(Withdrawn)
AS/NZS 3947.4.3:2000
AS/NZS 3947.5.1:2000
(Withdrawn)
AS/NZS 3947.5.2:2000
(Withdrawn)
Low-voltage switchgear and controlgear - Control circuit devices and switching elements Requirements for proximity devices with defined behaviour under fault conditions
Applies to proximity devices with an enhanced resistance to fault. Specifies requirements for four different types of PDF: PDF with
designed reliability; PDF with test capability, PDF with single fault tolerance and PDF with self-monitoring. This Standard is identical
with and reproduced from IEC 60947-5-3:1999.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 25 pages
AS/NZS 3947.5.3:2000
AS/NZS 3947.5.4:2000
(Withdrawn)
Low-voltage switchgear and controlgear - Control circuit devices and switching elements Electrical emergency stop device with mechanical latching function
Applies to electrical control circuit devices and switching elements with mechanical latching function, which are used to provide an
emergency stop signal. Provides detailed specifications relating to the electrical and mechanical construction of such devices and
their testing. This Standard is identical with and reproduced from IEC 60947-5-5:1997.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 11 pages
AS/NZS 3947.5.5:2000
AS/NZS 3947.5.6:2000
Low-voltage switchgear and controlgear - Control circuit devices and switching elements D.C. interface for proximity sensors and switching amplifiers (NAMUR)
Applies to proximity sensors connected for operation by a two-wire connecting cable to the control input of a switching amplifier. The
switching amplifier contains a d.c. source to supply the control circuit and is controlled by the variable internal resistance of the
proximity sensor. This Standard is identical with and reproduced from IEC 60947-5-6:1999.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 11 pages
Low-voltage switchgear and controlgear - Multiple function equipment - Automatic transfer
switching equipment
Applies to automatic transfer switching equipment to be used in emergency power systems with interruption of the supply to the load
during transfer, the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c. Specifies characteristics of equipment,
conditions with which the equipment must comply, tests intended to confirm these conditions have been met and data to be marked
on the equipment and/or provided by the manufacturer. This Standard is identical with and has been reproduced from IEC 60947-61:1989 plus Corrigendum:1991 plus Amendment 1:1994 and Amendment 2:1997.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 34 pages
AS/NZS 3947.6.1:2001
AS/NZS 3947.6.2:2001
(Withdrawn)
AS/NZS 3947.7.1:2001
(Withdrawn)
AS/NZS 3951.10:1994
(Withdrawn)
AS/NZS 3966.1:1994
(Withdrawn)
AS/NZS 3966.2:1994
(Withdrawn)
Information processing - SGML support facilities - Techniques for using SGML Application at ISO Central Secretariat for international Standards and technical reports
Defines the elements required, generic identifiers, attributes and their structure for international Standards and technical reports (ISO
Central Secretariat SGML application), and also contains the formal SGML document type definition. This standard is identical with
and reproduced from ISO/IEC TR 9573-11:1992.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 73 pages
AS/NZS 3967.11:1994
Information processing - SGML support facilities - Techniques for using SGML - Public
entity sets for mathematics and science
Defines character entity sets for some of the widely used special graphic characters. The entity repertoires are based on applicable
published and proposed international Standards for coded character sets. This standard is identical with and reproduced from
ISO/IEC TR 9573-13:1991.
Joint Australian/New Zealand Standard
AS/NZS 3967.13:1994
Domestic solid fuel burning appliances - Method for determination of flue gas emission
AS/NZS 4013:1999
Specifies a method and requirements for determining the rate of particulate emission from batch feed solid fuel burning appliances.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 22 pages
Domestic solid fuel burning appliances - Test fuels - Hardwood
AS/NZS 4014.1:1999
Specifies a test method for assessing hardwood test fuels used when determining the power output, efficiency and particulate
emission of domestic solid fuel appliances.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 4 pages
Domestic solid fuel burning appliances - Test fuels - Softwood
AS/NZS 4014.2:1999
Specifies a test method for assessing softwood test fuels used when determining the power output, efficiency and particulate
emissions of domestic solid fuel burning appliances.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 4 pages
Domestic solid fuel burning appliances - Test fuels - Lignite briquettes
AS/NZS 4014.3:1999
Specifies a test method for assessing lignite briquette test fuels used when determining the power output, efficiency and particulate
emissions of domestic solid fuel burning appliances.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
Domestic solid fuel burning appliances - Test fuels - Sub-bituminous coal
AS/NZS 4014.4:1999
Specifies a test method for assessing sub-bituminous coal test fuels used when determining the power output, efficiency and
particulate emissions of domestic solid fuel burning appliances.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
Domestic solid fuel burning appliances - Test fuels - Semi-anthracite coal briquettes
AS/NZS 4014.5:1999
Specifies test method for assessing semi-anthracite coal briquettes used when determining the power output, efficiency and
particulate emission of domestic solid fuel burning appliances.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
Domestic solid fuel burning appliances - Test fuels - Wood pellets
AS/NZS 4014.6:2007
Specifies test methods for assessing pellet test fuels used when determining the power output efficiency and particulate emission of
domestic solid fuel appliances.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 12 pages
Information technology - Open Systems Interconnection - The Directory - Overview of
concepts, models and services
Specifies the concepts of the Directory and the directory information base as well as presenting an overview of the services and
capabilities which they provide. This standard is identical with and reproduced from ISO/IEC 9594-1:1995.
Joint Australian/New Zealand Standard
AS/NZS 4019.1:1996
AS/NZS 4019.3:1996
AS/NZS 4019.5:1996
AS/NZS 4033.4:1999
AS/NZS 4033.7:1999
AS/NZS 4033.10:1999
Methods of testing sheet roof and wall cladding - Resistance to impact (sandbag) for wall
boards
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 4040.5:1996
Paints and related materials - Road marking materials - Waterborne paint - For use with
drop-on beads
Provides requirements for waterborne paints used for line marking materials for bituminous and concrete road surfaces.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
AS/NZS 4049.3:1996
AS/NZS 4051:1998
Guidance on the use of the substitution method for measurements of radiation from
microwave ovens for frequencies above 1 GHz
Describes a method of measurement for small microwave ovens (largest dimension less than 1 m) and a separate method of
measurement for large microwave ovens (largest dimension exceeding 1 m). Technically identical with IEC/CISPR 19:1983.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
AS/NZS 4052:1992
AS/NZS 4053:1997
AS/NZS 4056.6:1992
Specifies the principal dimensions and test values for carpenter`s pincers for general use. Identical with and reproduced from ISO
9243:1988.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Pliers and nippers - Slip joint pliers - Dimensions and test values
AS/NZS 4056.12:1992
Specifies the principal dimensions and test values for slip joint pliers for general use. Identical with and reproduced from ISO
9343:1988.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
Precast concrete pipes (pressure and non-pressure)
AS/NZS 4058:2007
Describes minimum requirements for materials and manufacture of controlled quality precast concrete pipes. It also describes
minimum requirements for sampling, testing and classifying concrete pipes manufactured in accordance with this Standard.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 64 pages
Anaesthetic machines - Non-electrical - For use with humans
AS/NZS 4059:1996
Specifies the basic requirements for anaesthetic machines and associated components up to and including the fresh (common) gas
outlet, for use with humans. Requirements are also included for anaesthetic vaporizers intended for incorporation into anaesthetic
machines. Does not apply to intermittent-flow anaesthetic machines which deliver gas to the breathing system at varying rates in
response to the patient`s inspiratory efforts, and to dental nitrous oxide-oxygen analgesia machines. This standard is based on ISO
5358:1992.
Reprinted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 25 pages
Amendment 1, 1996 $33.60+GST (Members), $42.00+GST (Retail)
Characterization of structural timber - Test methods
AS/NZS 4063.1:2010
Provides requirements for testing rectangular section structural timber to provide data for the determination of characteristic values
for structural design. It specifies the test methods only.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 28 pages
Characterization of structural timber - Determination of characteristic values
AS/NZS 4063.2:2010
To provide requirements for the sampling, statistical evaluation of test data and the determination of design characteristic values for
structural timber for structural design in accordance with the relevant Australian or New Zealand timber engineering design standard.
The test data used for the statistical evaluation is to be derived from testing in accordance with the test methods specified in AS/NZS
4063.1.
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 52 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
Information technology - Telecommunications and information exchange between systems
- Private telecommunications networks - Digital channel aggregation
Defines a set of procedures used in the provision of higher band width digital bi-directional channels by combining multiple switched
or non-switched 56 kbit/s or 64 kbit/s digital bearer channels across public or private networks. Identical with and reproduced from
ISO/IEC 13871:1995.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 93 pages
AS/NZS 4064:1997
(Withdrawn)
NZS/AS 4092:1993
(Withdrawn)
AS/NZS 4093:1994
AS/NZS 4095:1993
(Withdrawn)
Information processing - SGML support facilities - Registration procedures for public text
owner identifiers
Applies the assignment of unique owner prefixes to owners of public text conforming to AS 3514. It describes the procedures
whereby such assignments are made, and the method of constructing registered owner identifiers from them. Identical with and
reproduced from ISO 9070:1991.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 5 pages
AS/NZS 4097:1993
AS/NZS 4098:1993
(Withdrawn)
BS 4099.1:1986
(Withdrawn)
AS/NZS 4099:1994
AS/NZS 4106:1993
AS/NZS 4107.2:1994
AS/NZS 4107.3:1993
(Withdrawn)
AS/NZS 4109.2:1993
(Withdrawn)
Information technology - SGML and text-entry systems - Guidelines for SGML syntaxdirected editing systems
Describes a set of functions which an SGML syntax-directed editing system may have in order to help users manipulate documents
marked up according to the rules of SGML. Identical with and reproduced from ISO/IEC TR 10037:1991.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
AS/NZS 4110:1993
Spray painting booths, designated spray painting areas and paint mixing rooms - Design,
construction and testing
Specifies requirements for the design, construction and testing of spray painting booths, designated spray painting areas and paint
mixing rooms in which there may be an explosion hazard due to the presence of flammable volatiles from the paints and finishes
used. It is intended to be read in conjunction with AS/NZS 2381.1.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 34 pages
AS/NZS 4114.1:2003
Spray painting booths, designated spray painting areas and paint mixing rooms Installation and maintenance
Specifies requirements for the installation and maintenance of spray painting booths, designated spray painting areas and paint
mixing rooms in which there may be an explosion hazard due to the presence of flammable volatiles from the paints and finishes
used. It is intended to be read in conjunction with Part 1 and AS/NZS 2381.1.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 11 pages
AS/NZS 4114.2:2003
NZS/BS 4116.1:1992
(Withdrawn)
NZS/BS 4116.2:1992
(Withdrawn)
NZS/BS 4116.3:1992
(Withdrawn)
NZS/BS 4116.4:1992
(Withdrawn)
AS/NZS 4116:1993
(Withdrawn)
Gives requirements for making buildings and facilities accessible to and useable by people with physical disabilities. Provides a
means of compliance with the New Zealand Building Code.
Also available on request in large format (A3) and in removable electronic media.
$96.80+GST (Members), $121.00+GST (Retail), 124 pages
NZMP 4122:1989
AS/NZS 4136.1:1995
Specifies a reference configuration for private integrated services network exchanges for their interconnection to form integrated
services networks. It is one of a series of Standards applicable to private integrated services networking. Identical with and
reproduced from ISO/IEC 11579-1:1994.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
AS/NZS 4137:1995
AS/NZS 4144.1:1993
(Withdrawn)
AS/NZS 4144.2:1993
(Withdrawn)
(Withdrawn)
AS/NZS 4144.3:1993
(Withdrawn)
AS/NZS 4144.4:1993
(Withdrawn)
AS/NZS 4144.5:1993
(Withdrawn)
AS/NZS 4144.6:1993
(Withdrawn)
Laundry practice
AS/NZS 4146:2000
Specifies general laundry practice requirements and recommendations for commercial, industrial, hospital, institutional, on-premise
and coin-operated laundries as well as minimum performance requirements which should be attained in order to provide an
acceptable level of service.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 59 pages
Information technology - Telecommunications and information exchange between systems
- The structure and coding of logical link control addresses in local area networks
Provides a description of the ISO 8802-2 (AS/NZS 4802.2) addressing conventions, the consideration for the manner in which new
logical link control address uses are assigned an entry and a record, in the form of a table, of assigned uses of address values.
Identical with and reproduced from ISO/IEC TR 10178:1992.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 12 pages
AS/NZS 4147:1993
AS/NZS 4149:1994
Information technology - Open Systems Interconnection - Conformance test suite for the
ACSE protocol - Test suit structure and test purposes
Applies to conformance test suites for testing association control service element protocol implementations which operate over a
connection oriented presentation service and which claim conformance to AS 3684. Identical with and reproduced from ISO/IEC
10169-1:1991.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 14 pages
AS/NZS 4150.1:1993
AS/NZS 4151.2:1993
AS/NZS 4152.1:1994
AS/NZS 4152.3:1994
Information technology - Open Systems Interconnection - Systems management Attributes for representing relationships
Specifies the attributes for representing relationships and establishes a model that relates the service and generic definitions to user
requirements. Identical with and reproduced from ISO/IEC 10164-3:1993.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 17 pages
AS/NZS 4152.6:1994
AS/NZS 4152.7:1993
AS/NZS 4153.1 Supplement 1:1999 Information technology - Open Systems Interconnection - Procedures for the
operation of OSI registration authorities - General procedures - Incorporation of object
identifiers components (Supplement to AS/NZS 4153.1:1994)
Incorporates object identifier components into the operation of OSI registration authorities. This Supplement is identical with and has
been reproduced from ISO/IEC 9834-1:1993/Amd.1:1997.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 4153.1 Supplement 2:1999 Information technology - Open Systems Interconnection - Procedures for the
operation of OSI registration authorities - General procedures - Incorporation of the root
arcs of the object identifier tree (Supplement to AS/NZS 4153.1:1994)
Specifies the root arcs of the object identifier tree. This Supplement is identical with and has been reproduced from ISO/IEC 98341:1993/Amd.2:1998.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Information technology - Open Systems Interconnection - Procedures for the operation of
OSI registration authorities - Registration procedures for OSI document types
Specifies the contents of register entries recording information about OSI document types and assigns an unambiguous name to the
type definitions. Identical with and reproduced from ISO/IEC 9834-2:1993.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
AS/NZS 4153.2:1994
AS/NZS 4153.3:1999
AS/NZS 4157.1:2000
Specifies the framework and principles of a set of tests to evaluate conformance of DTE to AS 3512 (ISO/IEC 7776) or AS/NZS 3621
(ISO/IEC 8208). This Standard is identical with and has been reproduced from ISO /IEC 8882.1:1996.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 5 pages
Information technology - Telecommunications and information exchange between systems
- X.25 DTE conformance testing - Data link layer conformance test suite
Defines an abstract test suite for testing the conformance of the data link layer of a data terminal unit with respect to AS 3512
(ISO/IEC 7776). This Standard is identical with and has been reproduced from ISO/IEC 8882.2:1995.
Joint Australian/New Zealand Standard
$200.00+GST (Members), $250.00+GST (Retail), 205 pages
AS/NZS 4157.2:2000
Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
AS/NZS 4158:2003
Specifies the requirements for factory-applied thermal-bonded polymeric corrosion protective coatings (barrier coatings). For the
purposes of this Standard, the term polymeric coating is intended to encompass both thermoplastic and thermosetting coating
materials, which are used to coat both the internal and external surfaces of valves and fittings. This Standard covers the following
service application areas: (a) Factory-applied coatings and associated coatings used for repair; (b) Ductile iron, grey cast iron,
malleable iron, steel and copper alloy based substrates; (c) Valves, fittings and their components and associated equipment; (d)
Contact with water, and wastewater up to 50 degrees C; (e) Above and below ground exposure. Some coatings may not be suitable
for all wastewaters. Compatibility should be checked with the manufacturer. Guidelines on requirements to be specified by the
purchaser are given in Appendix A. Means of demonstrating compliance with this Standard are given in Appendix B.
Reprinted to incorporate Amendment 1:2005
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 17 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Information technology - Font information interchange - Architecture
AS/NZS 4159.1:1994
Defines a method of naming glyphs and glyph collections, independent of any document encoding technique; it assumes that one or
more methods of associating document encoding techniques with glyph identifiers used in font resources will be provided by text
processing systems. Identical with and reproduced from ISO/IEC 9541-1:1991.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 82 pages
Information technology - Font information interchange - Interchange format
AS/NZS 4159.2:1994
Specifies the interchange formats for font information, and the minimum subsets of that information required for interchange.
Identical with and reproduced from ISO/IEC 9541-2:1991.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 32 pages
Information processing systems - Information exchange between systems - Synchronous
transmission signal quality at DTE/DCE interfaces
Specifies signal quality requirements for serial data transmission at the interface between synchronous transmission data terminal
equipment and data circuit-terminating equipment. Identical with and reproduced from ISO 9543:1989.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
AS/NZS 4160:1994
AS/NZS 4161:2000
Specifies the procedure for back-up operation applicable to data transmission on a leased line when implemented through a single
interface, controlling both the leased and the back-up facilities using ITU-T Recommendation V.24. This Standard is identical with
and has been reproduced from ISO/IEC 8480:1995.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 5 pages
Information technology - Galvanic isolation of balanced interchange circuits
AS/NZS 4162:1994
Specifies galvanic isolation of balanced interchange circuits using optocoupler integrated circuit technology and provides for data
transmission in the two-condition code. Identical with and reproduced from ISO/IEC 9549:1990.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
Information technology - Telecommunications and information exchange between systems
- Formal description of AS 2911 in LOTOS
Describes the OSI transport service using the formal description technique LOTOS. Identical with and reproduced from ISO/IEC TR
10023:1992.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 27 pages
AS/NZS 4164:1994
Information processing systems - Data communications - Use of the X.25 packet level
protocol in local area networks
Specifies the operation of the X.25 packet level protocol using the logical link control type 1 and 2 procedures as defined in AS/NZS
4802.2. Identical with and reproduced from ISO/IEC 8881:1989.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 4166:1994
Information technology - Text and office systems - Document filing and retrieval - Abstract
service definition and procedures
Specifies a client-server type model in accordance with the distributed-office-application model, specifies functions and services
provided by document filing and retrieval (DFR) servers, specifies a DFR model for managing documents and groups of documents,
and specifies the DFR abstract service using the principles established by the abstract service definition conventions. Identical with
and reproduced from ISO/IEC 10166-1:1991.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 130 pages
AS/NZS 4167.1:1994
Information technology - Text and office systems - Document filing and retrieval - Protocol
specification
Specifies the abstract syntax of the document filing and retrieval (DFR) access protocol, specifies how the DFR access protocol
supports the DFR abstract service, specifies the mapping of the DFR access protocol onto the services used and specifies the
requirements for conformance with DFR access protocol. Identical with and reproduced from ISO/IEC 10166-2:1991.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
AS/NZS 4167.2:1994
NZS/BS 4168.1:1981
NZS/BS 4168.2:1981
NZS/BS 4168.3:1981
NZS/BS 4168.4:1981
NZS/BS 4168.5:1981
NZS/BS 4168.6:1982
(Withdrawn)
Hexagon socket screws and wrench keys: metric series - Specification for hexagon socket
shoulder screws
Specifies screws with ISO metric threads and shoulder diameters from 6 mm up to and including 24 mm.
Adopted Standard
$72.00+GST (Members), $90.00+GST (Retail), 8 pages
Amendment 1, 1987 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 4168.7:1982
Hexagon socket screws and wrench keys: metric series - Specification for hexagon socket
countersunk head screws
Specifies screws with ISO metric threads and diameters from 3 mm to and including 20 mm.
Adopted Standard
$72.00+GST (Members), $90.00+GST (Retail), 8 pages
Amendment 1, 1983 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 4168.8:1982
NZS/BS 4168.9:1983
(Withdrawn)
Information technology - International standardized profiles TB, TC, TD and TE Connection-mode transport service over connection-mode network service - Subnetworktype independent requirements for group TB
Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connectionmode network service and specifies the subnetwork-type independent requirements for group TB (transport protocol classes 0, 2 and
4). Identical with and reproduced from ISO/IEC ISP 10609-1:1992.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 12 pages
AS/NZS 4170.1:1994
Information technology - International standardized profiles TB, TC, TD and TE Connection-mode transport service over connection-mode network service - Subnetworktype independent requirements for group TC
Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connectionmode network service, and specifies the network-type independent requirements for group TC (transport protocol classes 0 and 2).
Identical with and reproduced from ISO/IEC ISP 10609-2:1992.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
AS/NZS 4170.2:1994
Information technology - International standardized profiles TB, TC, TD and TE Connection-mode transport service over connection-mode network service - Subnetworktype independent requirements for group TD
Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connectionmode network service, and specifies the subnetwork-type independent requirements for group TD (transport protocol class 0).
Identical with and reproduced from ISO/IEC ISP 10609-3:1992.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 4170.3:1994
Information technology - International standardized profiles TB, TC, TD and TE Connection-mode transport service over connection-mode network service - Subnetworktype independent requirements for group TE
Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connectionmode network service, and species the definition of profiles TB1111/TB1121. These profiles are in the TB group (transport classes 0,
2 and 4). Identical with and reproduced from ISO/IEC ISP 10609-4:1992.
AS/NZS 4170.4:1994
Information technology - International standardized profiles TB, TC, TD and TE Connection-mode transport service over connection-mode network service - Definition of
profiles TC1111/TC1121
Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connectionmode network service, and specifies the definition of profiles TC1111/TC1121. These profiles are in the TC group (transport classes
0 and 2). Identical with and reproduced from ISO/IEC ISP 10609-6:1992.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 4170.6:1994
Information technology - International standardized profiles TB, TC, TD and TE Connection-mode transport service over connection-mode network service - Definition of
profiles TD1111/TD1121
Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connectionmode network service, and specifies the definition of profiles TD1111/TD1121. These profiles are in the TD group (transport class
0). Identical with and reproduced from ISO/IEC ISP 10609-7:1992.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 4170.7:1994
Information technology - International standardized profiles TB, TC, TD and TE Connection-mode transport service over connection-mode network service - Definition of
profiles TE1111/TE1121
Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connectionmode network service, and specifies the definition of profiles TE1111/TE1121. These profiles are in the TE group (transport class 2).
Identical with and reproduced from ISO/IEC ISP 10609-8:1992.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 4170.8:1994
Information technology - International standardized profiles TB, TC, TD and TE Connection-mode transport service over connection-mode network service - Subnetworktype dependent requirements for the network layer, data link layer and physical layer
concerning permanent access to a packet switched data network using virtual calls
Specifies a combination of OSI standards, which collectively provide the connection-mode transport service using the connectionmode network service, and specifies the requirements for the network layer, data link layer and physical layer that apply to
configurations involving permanent access to packet switched data network using virtual calls. Identical with and reproduced from
ISO/IEC ISP 10609-9:1992.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 26 pages
AS/NZS 4170.9:1994
NZS/BS 4174:1972
(Withdrawn)
(Withdrawn)
Value management
AS/NZS 4183:1994
Specifies guidelines for the application of value management principles in construction, manufacturing and service industries. It
provides users with a value management framework, by defining terms establishing core elements for conducting a value
management study and clarifying roles and responsibilities.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
Evaluation and routine testing in medical imaging departments - General aspects
AS/NZS 4184.1:1994
Defines test methods to be carried out on equipment and subassemblies of X-ray imaging installations to assess the constancy of
functional performance by means of test instrumentation and test devices that are simple to use. Identical with and reproduced from
IEC 61223-1:1993.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 15 pages
Evaluation and routine testing in medical imaging departments - Constancy tests - Film
processors
Applies to those components of medical X-ray equipment which process radiographic images both on film and by electronic means.
Identical with and reproduced from IEC 61223-2.1:1993.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 24 pages
AS/NZS 4184.2.1:1994
Evaluation and routine testing in medical imaging departments - Constancy tests Radiographic cassettes and film changers - Film-screen contact and relative sensitivity of
the screen-cassette assembly
Applies to radiographic cassettes and to film changers equipped with intensifying screens used to record an X-ray pattern on
radiographic film by direct radiography. Identical with and reproduced from IEC 61223-2-2:1993.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
AS/NZS 4184.2.2:1994
Evaluation and routine testing in medical imaging departments - Constancy tests Darkroom safelight conditions
Applies to darkrooms in X-ray facilities where the image is processed either on film or by electronic means. Identical with and
reproduced from IEC 61223-2-3:1993.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
AS/NZS 4184.2.3:1994
Evaluation and routine testing in medical imaging departments - Constancy tests - Hard
copy cameras
Applies to constancy tests for hard copy cameras producing images on monochrome material such as photographic film or materials
sensitive to infrared radiation. It covers those types of imaging devices used in digital radiography, digital subtraction angiography,
computed tomography, magnetic resonance imaging, ultrasound and nuclear medicine. Identical with and reproduced from IEC
61223-2-4:1994.
Joint Australian/New Zealand Standard
AS/NZS 4184.2.4:1995
Evaluation and routine testing in medical imaging departments - Constancy tests - X-ray
equipment for computed tomography
Applies to those radiological installations with diagnostic X-ray equipment for computed tomography. It is one of a series of
publications intended to assist in the establishment and operation of a quality assurance program in the diagnostic X-ray department.
Identical with and reproduced from IEC 61223-2-6:1994.
Reprinted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 22 pages
Amendment 1, 1996 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4184.2.6:1995
Evaluation and routine testing in medical imaging departments - Constancy tests Equipment for intra-oral dental radiography
Applies to radiological installations with diagnostic X-ray systems designed to expose intra-orally placed image receptors such as
films and photostimulable phosphor sensors. It does not apply to- (a) systems using electronic image receptors such as charge
coupled devices; and (b) diagnostic X-ray systems designed to expose extra-orally placed image receptors such as dental
panoramic equipment and equipment for cephalometric radiography. This Standard modifies, and has been reproduced from, IEC
61223-2-7:1999 with variations for Australia and New Zealand included in a ZZ Appendix.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 19 pages
AS/NZS 4184.2.7:2002
Evaluation and routine testing in medical imaging departments - Constancy tests Equipment for indirect radioscopy and indirect radiography
Applies to those components of X-ray equipment which generate, influence the propagation of, and detect X-radiation, and process,
present and store diagnostic X-ray images in radiological installations with diagnostic X-ray systems for indirect radioscopy and
indirect radiography which use X-ray image intensifiers in conjunction with analogue and/or digital storage systems. This Standard is
identical with, and has been reproduced from, IEC 61223-2-9:1999.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 17 pages
AS/NZS 4184.2.9:2002
Evaluation and routine testing in medical imaging departments - Constancy tests Equipment for general direct radiography
Specifies requirements for those components of X-ray equipment which generate, influence the propagation of, and detect Xradiation, and process, present and store radiographic information in radiological installations with diagnostic X-ray systems using
radiographic film in direct radiography. Does not apply to mammographic, intra-oral, cephalometric and dental panoramic X-ray
equipment. This Standard is to be read in conjunction with AS/NZS 3200.1.0:1998. It modifies, and has been reproduced from, IEC
61223-2-11:1999 with variations for Australia and New Zealand included in an Appendix.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 36 pages
AS/NZS 4184.2.11:2002
Evaluation and routine testing in medical imaging departments - Acceptance tests Imaging performance of X-ray equipment for radiographic and radioscopic systems
Specifies requirements for those components of X-ray equipment which influence the image quality and patient dose of diagnostic Xray systems using radiographic and radioscopic imaging systems. Does not apply to mammographic, intra-oral, cephalometric and
dental panoramic X-ray equipment. This Standard is to be read in conjunction with AS/NZS 3200.1.0:1998. It modifies, and has been
reproduced from, IEC 61223-3-1:1999 with variations for Australia and New Zealand included in an Appendix.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 44 pages
AS/NZS 4184.3.1:2002
AS/NZS 4184.3.2:1998
Evaluation and routine testing in medical imaging departments - Acceptance tests Imaging performance of mammographic X-ray equipment
Specifies in service testing procedures to ensure that the image quality of radiograms produced by mammographic X-ray equipment
is maintained within required tolerances. This Standard includes an additional local Appendix ZZ, and is based on but not equivalent
to and reproduced from IEC 61223-3-2:1996.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Evaluation and routine testing in medical imaging departments - Acceptance tests Imaging performance of X-ray equipment used for digital subtraction angiography (DSA)
Specifies in-service testing procedures to ensure that the imaging quality of digital subtraction angiography (DSA) systems is
maintained within required tolerances. This Standard is identical with and has been reproduced from IEC 61223-3-3:1996.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 15 pages
AS/NZS 4184.3.3:1998
Evaluation and routine testing in medical imaging departments - Acceptance tests Imaging performance of dental X-ray equipment
Applies to those components of dental X-ray equipment using radiographic imaging systems which influence the image quality and
patient dose. Also applies to the performance of the acceptance tests on dental X-ray equipment with intra-oral X-ray image
receptor, and to dental film and digital image acquisition on processing. It is identical with, and reproduced from, IEC 61223-34:2000.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 29 pages
AS/NZS 4184.3.4:2002
Cleaning, disinfecting and sterilizing reusable medical and surgical instruments and
equipment, and maintenance of associated environments in health care facilities
Sets out procedures and process development which can be validated for the cleaning, disinfection and sterilization of reusable
medical and surgical instruments and equipment, and maintenance of associated environments in health care facilities. May be
suitable for application to the instruments and equipment used exclusively on animals in veterinary practice.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 121 pages
AS/NZS 4187:2003
AS/NZS 4189.1:1994
AS/NZS 4192:1994
Specifies requirements for the design, construction and performance of signs in the form of an illuminated flashing arrow, for use in
the temporary diversion of vehicular traffic. Provides for three basic types of sign, including those designed for truck or trailer
mounting. Does not cover the use of these signs in specific road situations.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
AS/NZS 4193.1:1994
(Withdrawn)
AS/NZS 4193.2:1994
(Withdrawn)
AS/NZS 4193.3:1994
(Withdrawn)
AS/NZS 4193.4:1994
(Withdrawn)
AS/NZS 4193.5:1994
(Withdrawn)
Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic
equipment
Establishes requirements for the declaration of the acoustic output of medical diagnostic equipment for the information of intending
purchasers. Identical with and reproduced from IEC 61157:1993.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 27 pages
AS/NZS 4194:1994
AS/NZS 4197.1:1999
AS/NZS 4199:1994
AS/NZS 4201.0:1994
AS/NZS 4203.1:1994
(Withdrawn)
AS/NZS 4203.2:1994
(Withdrawn)
AS/NZS 4203.3:1994
(Withdrawn)
NZS 4204P:1973
NZS 4205P:1973
(Withdrawn)
AS/NZS 4206:1994
Preferred co-ordinating sizes for rigid flat sheet boards used in building
NZS 4207:1975
Specifies co-ordinating sizes for the length and width dimensions of rigid flat sheet boards used in building. Identical with and
reproduced from ISO 2777:1974.
$39.20+GST (Members), $49.00+GST (Retail), 1 page
Information technology - Open Systems Interconnection - LOTOS description of the
session service
Provides the formal definitions of the OSI basic connection oriented session service described by the formal description technique
LOTOS. Identical with and reproduced from ISO/IEC TR 9571:1989.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 47 pages
AS/NZS 4207:1994
NZS 4208:1973
(Withdrawn)
AS/NZS 4208:1994
(Withdrawn)
AS/NZS 4209:1994
NZS 4210:2001
Sets out the requirements for the materials and workmanship of clay, concrete and natural stone masonry to be used in conjunction
with NZS 3604, NZS 4229 and NZS 4230 for the construction of masonry buildings and masonry veneers.
Reprinted to append Amendment 1:2002
$96.80+GST (Members), $121.00+GST (Retail), 48 pages
Amendment 1, 2002 $33.60+GST (Members), $42.00+GST (Retail)
Information technology - Telecommunications and information exchange between systems
- Transport conformance testing for connection-mode transport protocol operating over
connection-mode network service - Transport test management protocol specification
Provides the structure and encoding of the test management protocol data units used for the transfer of data and control information
from a lower tester to an upper tester. Identical with and reproduced from ISO/IEC 10025-3:1993.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 41 pages
AS/NZS 4210.3:1994
(Withdrawn)
(Withdrawn)
AS/NZS 4216:1994
AS/NZS 4218.1:1994
(Withdrawn)
AS/NZS 4221.1:1994
(Withdrawn)
AS/NZS 4221.2:1994
(Withdrawn)
NZS 4222:1992
Information technology - Open Systems Interconnection - Conformance test suite for the
presentation layer - Test suite structure and test purposes for the presentation protocol
Specifies a test suite structure and test purposes for the presentation protocol (excluding X.410 1984 mode). Identical with and
reproduced from ISO/IEC 10729-1:1993.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
AS/NZS 4222.1:1994
AS/NZS 4224:1994
AS/NZS 4225.1:1994
Information technology - Text and office systems - Office document architecture and
interchange format - Technical report on AS 3951 (ISO 8613) implementation testing Testing methodology
Defines a testing methodology and provides a framework for specifying abstract test cases for implementation testing, so providing a
base for testing the interworking capability of ODA implementations. Identical with and reproduced from ISO/IEC TR 10183-1:1993.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 14 pages
AS/NZS 4229.2:1994
NZS 4230:2004
Provides up to date information for the design of reinforced concrete masonry structures. This revision recognizes the predominant
use of reinforced concrete masonry for structural applications in NZ, and incorporates research findings specifically pertaining to the
performance of reinforced and prestressed concrete masonry.
Reprinted to incorporate Amendment 1:2006
$220.00+GST (Members), $275.00+GST (Retail), 158 pages
Amendment 1, 2006 $39.20+GST (Members), $49.00+GST (Retail)
Information technology - Coding of moving pictures and associated audio for digital
storage media at up to about 1.5 Mbit/s - Systems
Specifies the system layer of the coding (sometimes known as MPEG 1) developed to support the video and audio methods defined
in Parts 1 and 2 of this Standard. Identical with and reproduced from ISO/IEC 11172-1:1993.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 53 pages
AS/NZS 4230.1:1994
Information technology - Coding of moving pictures and associated audio for digital
storage media at up to about 1.5 Mbit/s - Video
Specifies the coding and decoding representation (sometimes known as MPEG 1) of video for digital storage media. Identical with
and reproduced from ISO/IEC 11172-2:1993.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 112 pages
AS/NZS 4230.2:1994
Information technology - Coding of moving pictures and associated audio for digital
storage media at up to about 1.5 Mbit/s - Audio
Specifies the coding and decoding representation (sometimes known as MPEG 1) of high quality audio for storage media. Identical
with and reproduced from ISO/IEC 11172-3:1993.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 150 pages
AS/NZS 4230.3:1994
Information technology - Coding of moving pictures and associated audio for digital
storage media at up to about 1.5 Mbit/s - Compliance testing
Specifies procedures to determine characteristics of coded bitstreams and to test compliance of bitstreams and decoders with the
requirements specified in Parts 1, 2 and 3 of AS/NZS 4230. Identical with and reproduced from ISO/IEC 11172-4:1995.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 42 pages
AS/NZS 4230.4:1997
Information technology - Coding of moving pictures and associated audio for digital
storage media at up to about 1.5 Mbit/s - Software simulation
Provides a C language software simulation of an encoder and decoder for AS/NZS 4230.1, AS/NZS 4230.2 and AS/NZS 4230.3.
This Standard is identical with and has been reproduced from ISO/IEC TR 11172-5:1998.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 13 pages
AS/NZS 4230.5:1999
NZS 4231:1985
(Withdrawn)
AS/NZS 4231:1994
NZS 4232.1:1988
NZS 4232.2:1988
Performance criteria for fire resisting enclosures - Part 2: Fire resisting glazing systems
Specifies the range of performance requirements which are to be provided when the term fire window is used. Provides a means of
compliance with the requirements for the design, manufacture and installation for all fire windows. Referenced in BIA Approved
Documents C2 and F3.
$39.20+GST (Members), $49.00+GST (Retail), 36 pages
Information technology - Use of X.25 packet layer protocol in conjunction with X.21/X.21bis
to provide the OSI connection-mode network service
Specifies the mapping of the OSI connection-mode network service primitives and parameters to and from the elements of the
protocols used by X.25 and X.21. Identical with and reproduced from ISO/IEC 10588:1993.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
AS/NZS 4232:1994
High pressure water (hydro) jetting systems - Guidelines for safe operation and
maintenance
Provides guidance on the various issues which need to be addressed when high pressure water jetting operations are performed.
The Standard also provides recommendations for the elimination or reduction of hazards and risk associated with high pressure
water jetting operations.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 27 pages
AS/NZS 4233.1:1999
NZS/BS 4235.1:1972
(Withdrawn)
AS/NZS 4236:1994
Respiratory therapy equipment - Jet nebulizers and jet nebulizer air pumps
Specifies performance and safety requirements for jet nebulizers and associated portable air pumps used in respiratory drug
therapy. Appendices include methods for determining minimum aerosol output, residual volume, minimum fill volume and
performance at normal orientation and at maximum angle of tilt of the jet nebulizer, determination of particle size and non-spill
volume.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
Respiratory therapy equipment - Peak expiratory flow meters
AS/NZS 4237:1994
Sets out requirements for simple mechanical, electro-mechanical, and electrical portable hand-held peak expiratory flow meters for
self-monitoring of peak expiratory flow rate. Appendices include methods for determining accuracy and repeatability of flow meter
output, effects of ageing and back pressure at constant flow.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
Code of practice for fire safety in atrium buildings
NZS 4238:1991
Deals with the special features and precautions to be incorporated in the design of a multi-storey building having an internal
courtyard under a space (atrium) which extends upwards for several floors but is not open at the top. The object is to ensure safety
of life in the event of a fire in any area which opens on to the atrium space. The Code is supplementary to the basic building code fire
protection requirements. It deals with the protection of escape routes, detection and extraction of smoke, use of sprinkler systems,
warning systems, emergency electricity supply and other requirements according to type of occupancy.
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Circuit-mode multi-rate bearer services - Service
description, functional capabilities and information flows
Specifies service description and control aspects of the multi-rate circuit-mode basic services which may be supported by a private
integrated service network (PISN). It is one of a series of Standards applicable to PISN. Identical with and reproduced from ISO/IEC
11584:1996.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
AS/NZS 4238:1996
AS/NZS 4239:1996
Remote control systems for mining equipment - Design, construction, testing, installation
and commissioning
Provides requirements for designers, manufacturers, users and regulating authorities concerned with the safe use of remote
controlled mining equipment in both the coal and metalliferous mining industries.
Joint Australian/New Zealand Standard
AS/NZS 4240.1:2009
Public toilets
NZS 4241:1999
Provides design information and advice on the numbers, location, type and quality including features and fittings for public toilets in
any location. Guidance on cleaning and sanitation is also provided. Toilet facilities composed of all-gender, single, fully enclosed,
self-contained units are proposed. Traditional separate gender facilities are also covered.
$210.40+GST (Members), $263.00+GST (Retail), 88 pages
Headstones and cemetery monuments
NZS 4242:1995
This Standard specifies minimum structural design criteria, performance and renovation requirements for cemetery monuments and
crematoria memorial gardens above and below the natural ground surface. It does not set out to preclude artistic endeavours.
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
Energy efficiency - Large buildings - Building thermal envelope
NZS 4243.1:2007
Specifies performance requirements for large buildings to achieve an adequate level of energy efficiency in respect of their building
envelope. The requirements for lighting have been updated and placed in a separate Standard (NZS 4243 Part 2).
$62.40+GST (Members), $78.00+GST (Retail), 34 pages
Energy efficiency - Large buildings - Lighting
NZS 4243.2:2007
Specifies performance requirements for large buildings to achieve an adequate level of energy efficiency in respect of lighting.
$62.40+GST (Members), $78.00+GST (Retail), 20 pages
Information technology - Telecommunications and information exchange between systems
- 26-pole interface connector mateability dimensions and contact number assignments
Specifies the 26-pole connector, including dimensions and assignments to be used when the functional characteristics of the
interface conform with V.24 and the electrical characteristics conform with V.10, V.11 or V.28. Identical with and reproduced from
ISO/IEC 11569:1993.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 4244:1994
AS/NZS 4245:1994
AS/NZS 4247.1:1994
Information technology - International standardized profiles AOM1n OSI management Management communications - Specification of ACSE, presentation and session protocols
for the use by ROSE and CMISE
Specifies the association control service element, presentation layer and the session layer standards that shall be used to provide
the required upper layer functions for the common management information service element and the remote operation service
element functions. Identical with and reproduced from ISO/IEC ISP 11183-1:1992.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 39 pages
AS/NZS 4248.1:1994
Information technology - International standardized profiles AOM1n OSI management Management communications - CMISE/ROSE for AOM12 - Enhanced management
communications
Specifies how the common management information service element (CMISE) combined with the remote operations service element
(ROS) shall be used to provide a complete set of operation and notification services to the CMISE-service-users of two end systems.
Identical with and reproduced from ISO/IECISP 11183-2:1992.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 101 pages
AS/NZS 4248.2:1994
Information technology - International standardized profiles AOM1n OSI management Management communications - CMISE/ROSE for AOM11 - Basic management
communications
Specifies how the common management information service element (CMISE) combined with the remote operation service element
(ROS) shall be used to provide a basic subset of operation and notification services to the CMISE-service-users of two end systems.
Identical with and reproduced from ISO/IEC ISP 11183-3:1992.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 79 pages
AS/NZS 4248.3:1994
AS/NZS 4251.2:1999
AS/NZS 4252.1:1994
Mailboxes
AS/NZS 4253:1994
Specifies the requirements for the design, construction and performance of mailboxes in both commercial and residential
applications. It is intended for use by regulatory authorities and all persons concerned with the manufacture, installation,
maintenance and general requirements of mailboxes.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Rubber used in preformed gaskets for weather exclusion from buildings - Specification for
non-cellular gaskets
Specifies requirements for the classification, physical properties and marking of solid (non-cellular) rubber used in preformed gaskets
for sealing applications in buildings where resistance to weathering, ozone and permanent deformation under load are of prime
importance. Applies to chloroprene, butyl, halobutyl, ethylene propylene, chlorosulphonated polyethylene and silicone rubbers used
in the gaskets. Five classes of material, defined according to the hardness of the rubber, are specified.
Adopted Standard
$72.00+GST (Members), $90.00+GST (Retail), 8 pages
NZS/BS 4255.1:1986
Plastic roof and wall cladding materials - Glass fibre reinforced polyester (GRP)
AS/NZS 4256.3:1994
Specifies requirements for general purpose translucent and opaque glass fibre reinforced polyester sheets of flat, corrugated and
other geometrical configurations intended for roof and wall cladding materials.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) wall
cladding boards
Specifies requirements for uncoated, opaque, uPVC sheets extruded and formed into profiles for use with accessories as external
wall cladding.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 4256.4:1995
Plastic roof and wall cladding materials - Methods of test - Determination of dimensional
properties
Reprinted to append Amendment 1:1995
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Amendment 1, 1995 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4257.1:1994
Plastic roof and wall cladding materials - Methods of test - Determination of dimensional
stability at 60 degrees C
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 4257.2:1994
Plastic roof and wall cladding materials - Methods of test - Determination of mass per unit
area of sheet
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 1 page
AS/NZS 4257.3:1994
Plastic roof and wall cladding materials - Methods of test - Determination of diffuse light
transmission
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 4257.4:1994
Plastic roof and wall cladding materials - Methods of test - Determination of glass fibre
content
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 4257.5:1994
AS/NZS 4257.6:1994
Plastic roof and wall cladding materials - Methods of test - Determination of impact
resistance
Plastic roof and wall cladding materials - Methods of test - Determination of residual
styrene
Identical with and reproduced from ISO 4901:1985.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 4257.8:1994
Plastic roof and wall cladding materials - Methods of test - Determination of transverse
bending stiffness
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 4257.9:1995
Plastic roof and wall cladding materials - Methods of test - Determination of surface
distortion (oil canning)
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 4257.10:1997
AS/NZS 4261:1994
Interactive voice response systems - User interface - Dual tone multi frequency (DTMF)
signalling
This Standard specifies requirements for the design of the user interface in interactive voice response (IVR) telephone systems
where the user input to the system is signalled by dual tone multi frequency (DTMF) tones.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 21 pages
AS/NZS 4263:2003
AS/NZS 4266.1:2004
AS/NZS 4266.2:2004
AS/NZS 4266.6:2004
Reconstituted wood-based panels - Methods of test - Thickness stability and glue bond
quality
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
AS/NZS 4266.9:2003
Reconstituted wood-based panels - Methods of test - Moisture resistance under cyclic test
conditions
Specifies a method for determining the moisture resistance of reconstituted wood-based panels under cyclic test conditions.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 5 pages
AS/NZS 4266.11:2004
AS/NZS 4266.14:2004
AS/NZS 4266.15:1995
AS/NZS 4266.17:1995
(Withdrawn)
AS/NZS 4266.19:2004
AS/NZS 4266.20:2004
Specifies a structure and content for spatially referenced data in order to facilitate data transfer between dissimilar spatial database
systems. This Standard is based on and has been reproduced from Part 1 of US Federal Information Processing Standards
Publication FIPS PUB 173.1-1992.
Joint Australian/New Zealand Standard
$178.40+GST (Members), $223.00+GST (Retail), 215 pages
Geographic information systems - Spatial data transfer standard - Spatial features
AS/NZS 4270.2:1995
Specifies the US classification and definitions of entities and attributes for the spatial features identified in a data transfer. Its use
within Australia and New Zealand is restricted to data transfers with systems complying with the US version of Spatial Data Transfer
Standard entities and attributes. This Standard is based on and has been reproduced from Part 2 of US Federal Information
Processing Standards Publication FIPS PUB 173.2-1992.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 63 pages
Geographic information systems - Spatial data transfer standard - ISO 8211 encoding
AS/NZS 4270.3:1995
Provides a representation of a Spatial Standard file set in a standardized method enabling the file set to be exported to or imported
from different media by general purpose software complying ISO 8211. This Standard is based on and has been reproduced from
Part 3 of US Federal Information Processing Standards Publication FIPS PUB 173.3-1992.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 49 pages
Geographic information systems - Spatial data transfer standard - Topological vector
profile
Provides a limited subset to the specifications for data transfer contained in AS/NZS 4270, Parts 1 to 3. The topological vector
profile supports only geographic vector data with geometry and topology. Includes an Appendix which provides variations for
Australia and New Zealand. This standard is technically equivalent to and has been reproduced from FIPS PUB 173-1B-1994.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 45 pages
AS/NZS 4270.4:1998
AS/NZS 4271.1(Int):2000
(Withdrawn)
Water microbiology - Method 3: Heterotrophic colony count methods - Method 3.2: Plate
count of water containing biocides
This Standard sets out a method for estimating the number of colony-forming units (CFUs) in water using a pour plate technique and
R2A Agar. For waters which may contain growth-inhibiting additives which have not been neutralized, plate counts starting with the
1:100 dilution are recommended in order to eliminate interference with counts. This increases the lower detection limit of the method
to 100 cfu/mL. This limit is generally adequate for applications such as the monitoring of cooling tower water.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 4 pages
AS/NZS 4276.3.2:2003
AS/NZS 4276.7:2007
Water microbiology - Method 19: Examination for thermophilic Campylobacter spp. Membrane filtration
Method for detecting thermophilic Campylobacters in water using culture in enrichment broth and on selective agar media. A flow
diagram of the procedure is shown in Appendix A.
Joint Australian/New Zealand Standard
AS/NZS 4276.19:2001
Water microbiology - Method 22: Packaged water - Coliform bacteria and Escherichia coli Membrane filtration method
Establishes a reference method for the detection and enumeration of coliform and Escherichia coli bacteria in water that has been
bottled or packaged in any way for human consumption. Adopted from ISO 9308.1:2000 with national modifications.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 20 pages
AS/NZS 4276.22:2007
Text telecommunications - User interface requirements - For deaf people and people with
hearing and speech disabilities
Specifies requirements for the design of the user interface for textphones for communicating with deaf people and people with
hearing and speech disabilities.
Reprinted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Amendment 1, 1996 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4277:1995
NZS/BS 4278:1984
(Withdrawn)
AS/NZS 4279(Int):1995
406 MHz satellite distress beacons - Marine emergency position-indicating radio beacons
(EPIRBs)
Provides manufacturers, suppliers and testing facilities of 406 MHz satellite distress beacons with the minimum radiofrequency and
environmental requirements and associated test methods to enable design and confirmation of compliance with Australia and New
Zealand radio frequency spectrum and maritime regulatory requirements. Based on IEC 61097-2:2002 with modifications for New
Zealand and Australia.
Reprinted to incorporate Amendments 1, 2 and 3
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 54 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2010 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4280.1:2003
Radiocommunications requirements for cordless telephones operating in the 1.7 MHz and
between 30 and 41 MHz frequency bands
Specifies the minimum standards and essential requirements for the operation of the radiocommunication aspects of this equipment.
This Standard does not address the requirements necessary for connecting this equipment to the Public Switched Telephone
Network (PSTN), the equipment requirements it must meet for doing so, or user safety requirements.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Testing of building facades
AS/NZS 4284:2008
Sets out methods of testing building facades for environmental loading including water penetration and air infiltration as well as
structural tests. Optional tests include seismic testing, seal degradation and building maintenance unit (BMU) restraint.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 31 pages
Single-service cloth towels
AS/NZS 4286:1995
Specifies constructional, performance and servicing requirements for cloth towels which are dispensed for single use from a
dispenser machine. Does not include requirements for the dispenser machine.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
Child carrier seats for pedal bicycles - Safety requirements
AS/NZS 4287:1995
Specifies safety requirements for child carrier seats which may be attached to a bicycle other than a child`s bicycle for the purpose of
transporting as a passenger, a child having a body weight of not greater than 22 kg.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 19 pages
AS/NZS 4290:1995
(Withdrawn)
AS/NZS 4291.1:1995
(Withdrawn)
Mechanical properties of fasteners - Nuts with specified proof load values - Coarse thread
AS/NZS 4291.2:1995
Specifies materials, mechanical properties and marking requirements for steel nuts of property classes 4, 5, 6, 8, 9,10 and 12 with
ISO metric coarse pitch threads and diameters up to and including 39 mm. The property class system is explained and test methods
for determination of mechanical properties are given. Identical with and reproduced from ISO 898-2:1992.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
AS/NZS 4291.5:1995
AS/NZS 4293:1995
Analogue speech (angle modulated) equipment operating in land mobile and fixed services
bands in the frequency range 29.7 MHz to 1 GHz
Specifies the essential operational and marking requirements and required radiofrequency characteristics for operation within the
Australian and New Zealand radiofrequency spectrum arrangements.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 25 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4295:2004
NZS 4297:1998
Engineering design of earth buildings
Provides for the structural and durability design of unfired earthen wall buildings. The scope is limited to adobe, pressed brick,
poured earth and rammed earth and which contain clay and silt and which rely on the clay and silt particles present to achieve
satisfactory performance with or without chemical stabilization. Such materials shall comply with NZS 4298 "Materials and
Workmanship for Earth Buildings".
$102.40+GST (Members), $128.00+GST (Retail), 56 pages
Materials and workmanship for earth buildings
NZS 4298:1998
Sets out requirements for the materials and workmanship requirements for the use of unfired earth in the form of adobe, pressed
earth brick, rammed earth or poured earth. It applies to buildings which are designed in accordance with NZS 4297 "Engineering
Design of Earth Buildings" and NZS 4299 "Earth Buildings Not Requiring Specific Design". This Standard provides a means of
compliance with the materials and workmanship requirements of earth walled structures. Test methods for earth building materials
and criteria for acceptable results are included.
Reprinted to incorporate Amendment 1:2000
$125.60+GST (Members), $157.00+GST (Retail), 82 pages
Amendment 1, 2000 $28.80+GST (Members), $36.00+GST (Retail)
Earth buildings not requiring specific design
NZS 4299:1998
Sets down construction requirements for earth walled buildings not requiring specific engineering design. Many drawings of
construction details which have been proved in New Zealand are included to help builders in earth to achieve durable and
weatherproof buildings. To be used in conjunction with NZS 4298 "Materials and Workmanship for Earth Buildings".
Reprinted to incorporate Amendment 1:2000
$136.80+GST (Members), $171.00+GST (Retail), 121 pages
Amendment 1, 2000 $28.80+GST (Members), $36.00+GST (Retail)
NZS 4301.1:1993
NZS 4301.3:1993 (AS 2201.3:1991) Intruder alarm systems - Detection devices for internal use
Specifies requirements for the performance of detection devices intended for use in intruder alarm systems. Identical to AS 2201.31991 with modifications for New Zealand.
Reprinted to append Amendment A:1993
Adopted Standard
$135.70+GST (Members), $169.63+GST (Retail), 30 pages
Amendment A, 1993 $33.60+GST (Members), $42.00+GST (Retail)
Code of practice for the control of hygiene in air and water systems in buildings
NZS 4302:1987
Provides guidance to building and building services designers and operating staff responsible for running the services of a building in
relation to the control of hygiene in its air and water systems. Main emphasis on large industrial, commercial and residential
accommodation buildings that contain large numbers of people and have air conditioning and extensive water systems. Sets
principles of design, installation, operation and maintenance which will assist in reducing the likelihood of outbreaks of infectious
diseases originating from air and water systems.
Reprinted to append Amendment 1:1991
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
Amendment 1, 1991 $33.60+GST (Members), $42.00+GST (Retail)
Ventilation for acceptable indoor air quality
NZS 4303:1990
Specifies minimum ventilation rates and indoor air quality that will be acceptable to human occupants and intended to avoid adverse
health effects. Applies to all indoor or enclosed spaces that people may occupy, except where other applicable Standards and
requirements dictate larger amounts of ventilation than this Standard. Release of moisture in residential kitchens, bathrooms, locker
rooms, and swimming pools is included in the scope of this Standard. Based on but not equivalent to ASHRAE 62:1989.
$96.80+GST (Members), $121.00+GST (Retail), 32 pages
Management of Healthcare Waste
NZS 4304:2002
Provides guidelines for the disposal of human and animal healthcare waste, including generators, waste transporters and waste
disposal facilities. It outlines procedures for the classification, segregation, packaging/containment, labelling, storage, transport and
disposal of healthcare waste.
$68.80+GST (Members), $86.00+GST (Retail), 44 pages
NZS/BS 4320:1968
(Withdrawn)
121.5 and 243.0 MHz emergency position indicating radio beacons (EPIRBs) including
personal EPIRBs
Provides the essential requirements for 121.5 and 243.0 MHz emergency position indicating radio beacons (EPIRBS) including
personal EPIRBS, this Standard includes both environmental and operational requirements and radio-frequency requirements for
marine and aviation application beacons. The requirements are made up of specifications, and the methods of test for verification of
those specifications, which are based on COSPAS-SARSAT and International Maritime Organization requirements.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 24 pages
AS/NZS 4330:2006
NZS 4332:1997
Non-domestic passenger and goods lifts
Specifies requirements for the design, construction, operation and testing of passenger carrying lifts including goods lifts with car
controls and not including lifts in single unit dwellings. It applies to new building work being either the installation of a new lift or new
work associated with an existing installation.
$108.80+GST (Members), $136.00+GST (Retail), 159 pages
Graphic symbols for use on medical electrical equipment
AS/NZS 4334:1995
Provides a comprehensive listing of symbols for use on medical electrical equipment for both safety and identification purposes.
Reprinted to incorporate Amendment 1:1996
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 49 pages
Amendment 1, 1996 $33.60+GST (Members), $42.00+GST (Retail)
Glossary of terms used in project network techniques
NZS/BS 4335:1987
Presents in a structured form terms, definitions and symbols used in project network techniques. Appendices have been included to
form an interface with other related disciplines.
Adopted Standard
$192.00+GST (Members), $240.00+GST (Retail), 24 pages
NZS/ISO 4335:1987
AS/NZS 4337:1997
AS/NZS 4340:1997
AS/NZS 4346:1995
Damp-proof courses and flashings - Methods of test - General introduction, list of methods
and test specimen requirements
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 4347.0:1995
AS/NZS 4347.3:1995
AS/NZS 4347.7:1995
Damp-proof courses and flashings - Methods of test - Preparation of coating bitumen for
testing
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 4347.8:1995
(Withdrawn)
AS/NZS 4354:1995
Radiocommunications equipment used in the handphone and citizen band radio services
operating at frequencies not exceeding 30 MHz
Specifies the essential requirements and minimum standards for radiocommunications equipment intended to operate in the
handphone and citizen band radio services at frequencies not exceeding 30 MHz.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
AS/NZS 4355:2006
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers Determination of the entrance field size
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the entrance field size of the intensifier. Identical to and reproduced from IEC 61262-1:1994.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
AS/NZS 4356.1:1996
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers Determination of the conversion factor
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the conversion factor of the intensifier. Identical to and reproduced from IEC 61262-2:1994.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
AS/NZS 4356.2:1996
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers Determination of the luminance distribution and luminance non-uniformity
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the luminance distribution and luminance non-uniformity of the intensifier. Identical to and reproduced from IEC
61262-3:1994.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
AS/NZS 4356.3:1996
AS/NZS 4356.4:1996
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers Determination of the image distortion
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the image distortion of the intensifier. Identical to and reproduced from IEC 61262-4:1994.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers Determination of the detective quantum efficiency
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the detective quantum efficiency of the intensifier. Identical to and reproduced from IEC 61262-5:1994.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 14 pages
AS/NZS 4356.5:1996
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers Determination of the contrast ratio and veiling glare index
Applies to electro-optical X-ray image intensifiers for medical use, as components of diagnostic X-ray systems. It describes a method
of determining the contrast ratio and veiling glare index of the intensifier. Identical to and reproduced from IEC 61262-6:1994.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
AS/NZS 4356.6:1996
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers Determination of the modulation transfer function
Describes a method of determining the modulation transfer functions of X-ray image intensifiers.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 14 pages
AS/NZS 4356.7:1996
AS/NZS 4357.3:2006
AS/NZS 4357.4:2005
Specifies a method for the determination of formaldehyde emissions from plywood. This test method is based upon the Japanese
Agricultural Standard (JAS) method specified in MAFF Notification No. 233 but has been adapted to suit products commonly
manufactured and sold in Australian and New Zealand.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of
characteristics
Specifies methods for identifying the most important characteristics of diagnostic X-ray equipment and the relevant associated test
methods, so that the characteristics can be stated in a standardized way to facilitate comparison between devices. Identical to and
reproduced from IEC 61267:1994.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 29 pages
AS/NZS 4358:1996
(Withdrawn)
AS/NZS 4360:2004
User-applied labels for use on syringes containing drugs used during anaesthesia
AS/NZS 4375:1996
Sets out the requirements for labels which the user attaches to drug-filled syringes so that the contents can be identified just before
use during anaesthesia. Size, colour and pattern of the label and the typographic characteristics of the wording are dealt with.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 4376:1996
NZS/BS 4377:1991
(Withdrawn)
AS/NZS 4377:1996
Characteristics and test conditions of radionuclide imaging devices - Anger type gamma
cameras
Specifies a series of tests, and the terminology for reporting these tests, to be carried out by manufacturers and which enables them
to declare the characteristics of gamma cameras on a common basis, thus allowing purchasers to compare the performance of
various models and choose that one which is best suited to their requirements. Identical to and reproduced from IEC 60789:1992.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
AS/NZS 4378:1996
Information technology - Open Systems Interconnection - Remote database access Generic model, service and protocol
Specifies a remote database access service in terms of the database server and the database processing services with respect to
the remote database access client. Identical to and reproduced from ISO/IEC 9579-1:1993.
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 161 pages
AS/NZS 4379.1:1996
AS/NZS 4379.2:1996
AS/NZS 4380:2001
Motor vehicles - Cargo restraint systems - Transport webbing and components
Specifies requirements for webbing restraint systems for use in the transport industry.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
Preparation of function charts for control systems
AS/NZS 4382:1996
Provides rules and symbols for the preparation of descriptions of the function and behaviour of control systems by establishing an
implementation-independent graphical representation. Provides a general process approach to describing control functions and may
be applied to non-electrical systems. Method of representation is an industrial application of `Petri nets`. Identical to and reproduced
from IEC 60848:1988 including Corrigendum 1990.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 48 pages
Preparation of documents used in electrotechnology - General requirements
AS/NZS 4383.1:1996
Provides general rules and guidelines for the preparation of documents used in electrotechnology. Contains a classification of
documents, documentation principles, including the structure of documents, and general drawing rules on formats, layout, graphical
symbols and simplification techniques. Numerous illustrative examples are provided. Identical to and reproduced from IEC 610821:1991 and Amendment 1:1995.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 93 pages
Preparation of documents used in electrotechnology - Function-oriented diagrams
AS/NZS 4383.2:1996
Covers the layout and presentation of function-oriented diagrams, such as overview, function and circuit diagrams, which are used to
highlight the functioning of a system and its circuitry. Provides rules for the layout of the diagrams, choice of symbols and different
forms of representation. Includes systems for non-electrical circuits and processes. Contains numerous illustrations. Identical to and
reproduced from IEC 61082-2:1993.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 76 pages
Preparation of documents used in electrotechnology - Connection diagrams, tables and
lists
Provides rules for connection diagrams which are used when assembling, installing or maintaining equipment. Numerous illustrations
are provided. Identical to and reproduced from IEC 61082-3:1993.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
AS/NZS 4383.3:1996
Specifies the minimum requirements for the construction, durability, safety, ergonomics, strength, coordination of services and
choice of components of fitted kitchen assemblies for use in domestic applications. This Standard is also applicable to small offices,
holiday apartments, units and similar non-commercial applications. It is designed for use by manufacturers, builders, consumers,
specifiers and regulatory authorities.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 37 pages
Domestic kitchen assemblies - Installation
AS/NZS 4386.2:1996
Specifies the minimum requirements for the installation of fitted kitchen assemblies for use in domestic applications, whether
delivered in pre-assembled or in flat-pack form. This Standard is also applicable to small offices, holiday apartments, units and
similar non-commercial applications. It is designed for use by installers, manufacturers, builders, consumers, specifiers and
regulatory authorities alike.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
Domestic kitchen assemblies - Methods of test - Introduction, list of methods and general
requirements
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 4387.0:1996
AS/NZS 4387.1:1996
AS/NZS 4387.3:1996
AS/NZS 4387.8:1996
AS/NZS 4387.9:1996
AS/NZS 4387.12:1996
AS/NZS 4387.15:1996
Safety mesh
AS/NZS 4389:1996
Specifies the minimum requirements for the design, construction, testing and installation of safety mesh for use in domestic,
commercial and industrial building applications.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
AS/NZS 4391(Int):1996
Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical
diagnosis
Defines the most common operating characteristics of rotating anode X-ray tubes, during and after energization, to facilitate
comparison between these devices. Identical to and reproduced from IEC 60613:1989.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
AS/NZS 4394:1996
NZS/BS 4395.1:1969
(Withdrawn)
NZS/BS 4395.2:1969
(Withdrawn)
NZS/BS 4395.3:1973
(Withdrawn)
Information technology - Keyboard layouts for text and office systems - General principles
governing keyboard layouts
Specifies the spacing and physical characteristics of keys and the principles governing the placement of characters and symbols
used on numeric, alphanumeric and composite keyboards. Identical to and reproduced from ISO/IEC 9995-1:1994.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
AS/NZS 4395.1:1996
Information technology - Keyboard layouts for text and office systems - Alphanumeric
section
Specifies the alphanumeric section of a keyboard, the arrangement, the location and the number of the keys in the alphanumeric
zone. Identical to and reproduced from ISO/IEC 9995-2:1994.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
AS/NZS 4395.2:1996
Information technology - Keyboard layouts for text and office systems - Complementary
layouts of the alphanumeric zone of the alphanumeric section
Specifies a set of graphic characters which, when used in combination with an existing national version keyboard layout, allows the
input of the full graphic character repertoire defined in AS 2793. Identical to and reproduced from ISO/IEC 9995-3:1994.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 4395.3:1996
Information technology - Keyboard layouts for text and office systems - Numeric section
AS/NZS 4395.4:1996
Specifies the numeric section, the arrangement, the number and the location of the keys in the various zones of the section.
Identical to and reproduced from ISO/IEC 9995-4:1994.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
Information technology - Keyboard layouts for text and office systems - Editing section
AS/NZS 4395.5:1996
Specifies the editing section, the cursor zone and the allocation of functions to its keys. Identical to and reproduced from ISO/IEC
9995-5:1994.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
Information technology - Keyboard layouts for text and office systems - Function section
AS/NZS 4395.6:1996
Specifies the function section of the keyboard and the allocation of functions to the keys. Identical to and reproduced from ISO/IEC
9995-6:1994.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
Information technology - Keyboard layouts for text and office systems - Symbols used to
represent functions
Specifies the symbols used for functions found in any type of keyboard. Identical to and reproduced from ISO/IEC 9995-7:1994.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 14 pages
AS/NZS 4395.7:1996
AS/NZS 4395.8:1996
Information technology - Keyboard layouts for text and office systems - Allocation of
letters to the keys of a numeric keypad
Specifies the allocation of letters to the numeric zone and is intended for keyboards where letters instead of digits are used for
mnemonic retention of numeric information. Identical to and reproduced from ISO/IEC 9995-8:1994.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables
AS/NZS 4396:1999
Specifies requirements for the construction and performance of insulation piercing connectors between 0.6/1 kV aerial bundled
cables and insulated branch cables. Tests of performance requirements are provided.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 34 pages
Sun protective clothing - Evaluation and classification
AS/NZS 4399:1996
This Standard sets out requirements for determining the rated ultraviolet protection factor of sun protective textiles, garments and
other items of personal apparel (such as hats) which are worn in close proximity to the skin. It also specifies appropriate detailed
labelling requirements. It does not cover sunscreen products for topical application to the human skin, fabrics for architectural or
horticultural use such as shadecloth, or sunglasses. It does not cover items which offer protection at a distance from the skin, such
as umbrellas or shade structures, or protection from ultraviolet radiation sources other than the sun.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
Amendment 1, 1998 $33.60+GST (Members), $42.00+GST (Retail)
Plastics piping systems for soil and waste discharge (low and high temperature) inside
buildings - Polyethylene (PE)
Specifies the requirements for solid-wall polyethylene (PE) pipes and fittings for soil and waste discharge (low and high temperature)
inside buildings, as well as the system itself. It does not include buried pipework.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 36 pages
AS/NZS 4401:2006
Methods of testing soils for civil engineering purposes - Preliminary and general
NZS 4402.1:1986
Covers soil testing for engineering purposes. Establishes definitions and symbols, test equipment, soil grouping, preparation of
samples for testing and the use of test results in calculations.
Looseleaf. Parts available separately or together in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 17 pages
NZS 4402 Supplement 1:1988
Methods of testing soils for civil engineering purposes - Supplementary tests - November
1988
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.1
Determination of the water content
Covers the determination of the water content of a soil as a percentage of its dry mass. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS 4402.2.1:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.2
Determination of the liquid limit
Covers the determination of the liquid limit of a soil which has not been dried below natural water content. The method may also be
used on previously dried soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
NZS 4402.2.2:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.3
Determination of the plastic limit
Covers the determination of the plastic limit of a soil which has not been dried below natural water content. The method may also be
used on previously dried soils. To be read in conjunction with Part 1.
NZS 4402.2.3:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.5
Determination of the cone penetration limit
Covers the determination of the cone penetration limit of a soil which has not been dried below natural water content. The method
may also be used on previously dried soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
NZS 4402.2.5:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.6
Determination of the linear shrinkage
Covers the determination of the linear shrinkage of a soil. The test may also be used on samples of soil in their natural state. To be
read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
NZS 4402.2.6:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.7.1
Method for coarse, medium and fine soils
Covers the determination of the solid density of soil particles. It is not suitable for soils containing stones retained on a 37.5 mm test
sieve unless such stones are broken down to less than this size. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4402.2.7.1:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.7.2
Method for medium and fine soils
Covers the determination of the solid density of soil particles of medium and fine soils. Any stones retained on a 20 mm test sieve
must be broken down to less than this size. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4402.2.7.2:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.1
Standard method by wet sieving
Covers the quantitative determination of the particle size distribution in a soil down to the fine s and size by wet sieving. To be read
in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
NZS 4402.2.8.1:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.2
Subsidiary method by dry sieving
Covers the quantitative determination of the particle-size distribution in a soil down to the fine s and size by dry sieving. The method
should not be used unless it has been shown that for the type of material under test it gives the same results as the method of
analysis by wet sieving. In case of doubt, Test 2.8.1 should be used. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
NZS 4402.2.8.2:1986
Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.3
Standard method for fine soils (pipette method)
Covers the quantitative determination of the particle-size distribution in a soil from the coarse sand size down. This test is not
normally carried out if less than 10 percent of the material passes the 63 micron test sieve, as measured in Test 2.8.1. To be read in
conjunction with Part 1.
NZS 4402.2.8.3:1986
NZS 4402.2.8.4:1986
Soil chemical tests - Determination of the organic matter content - Test 3.1.1 Standard
method by titration
Covers the determination of the percentage by mass of organic matter present in a soil by titration. To be read in conjunction with
Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4402.3.1.1:1986
Soil chemical tests - Determination of the organic matter content - Test 3.1.2 Subsidiary
method by ignition
Covers the determination of the percentage by mass of organic matter present in a soil by loss on ignition. To be read in conjunction
with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
NZS 4402.3.1.2:1986
Methods of testing soils for civil engineering purposes - Soil chemical tests - Test 3.2
Determination of the total sulphate content
Describes a procedure for determining the acid soluble sulphate content of natural soil which includes all naturally occurring
sulphates apart from negligible rarities. The results obtained give the sulphate content at the time of sampling only as the sulphate
content is subject to seasonal fluctuations. The method can also be used for the determination of the sulphate content of 1 : 1 soil :
water extract, or the sulphate content of groundwater. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4402.3.2:1986
Soil chemical tests - Determination of the pH value - Test 3.3.1 Standard method
(electrometric)
Covers the electrometric determination of the pH value of a soil suspension. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
NZS 4402.3.3.1:1986
Soil chemical tests - Determination of the pH value - Test 3.3.2 Subsidiary method
(colorimetric)
Covers a colorimetric determination of soil pH. Intended primarily as a rapid field method. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 1 page
NZS 4402.3.3.2:1986
Methods of testing soils for civil engineering purposes - Soil chemical tests - Test 3.4
Detection of presence of allophane in soils
Covers a simple field test to detect the presence of allophane in soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 1 page
NZS 4402.3.4:1986
Soil compaction tests - Determination of the dry density/water content relationship - Test
4.1.1 New Zealand standard compaction test
Covers the determination of the dry density when the soil passing a 19.0 mm test sieve is compacted in a specified manner, over a
range of water contents, including that which gives the maximum dry density. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
NZS 4402.4.1.1:1986
Soil compaction tests - Determination of the dry density/water content relationship - Test
4.1.3 New Zealand vibrating hammer compaction test
Covers the determination of the dry density when the soil passing a 37.5 mm test sieve is compacted by an electrically operated
vibrating hammer compactor, over a range of water contents, including that which gives the maximum dry density. To be read in
conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
NZS 4402.4.1.3:1986
Soil compaction tests - Determination of the minimum and maximum dry densities and
relative density of a cohesionless soil - Test 4.2.1 Minimum dry density
Provides a standard technique for the laboratory determination of the minimum dry density of a cohesionless soil.
Included in Supplement 1; not available separately
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS 4402.4.2.1:1988
Soil compaction tests - Determination of the minimum and maximum dry densities and
relative density of a cohesionless soil - Test 4.2.2 Maximum dry density
Provides a standard technique for the laboratory determination of the maximum dry density of a cohesionless soil by vibratory
compaction of a fully saturated sample.
Included in Supplement 1; not available separately
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
NZS 4402.4.2.2:1988
Soil compaction tests - Determination of the minimum and maximum dry densities and
relative density of a cohesionless soil - Test 4.2.3 Relative density
Determines the relative density of a soil with respect to the loosest and densest states at which it can be placed by the laboratory
techniques specified.
Included in Supplement 1; not available separately
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
NZS 4402.4.2.3:1988
Soil density tests - Determination of the density of soil - Test 5.1.1 Sand replacement
method for the determination of in situ density
Covers the determination in situ of the density of undisturbed or compacted soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 9 pages
NZS 4402.5.1.1:1986
Soil density tests - Determination of the density of soil - Test 5.1.2 Balloon densometer
method for the determination of the in situ density
Covers the determination in situ of the density of fine, medium and some coarse soils. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
NZS 4402.5.1.2:1986
Soil density tests - Determination of the density of soil - Test 5.1.3 Sampling tube method
for the determination of the in situ density
Covers the determination in situ of the density of undisturbed or compacted fine cohesive soils into which a sampling tube may easily
be driven. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4402.5.1.3:1986
Soil density tests - Determination of the density of soil - Test 5.1.4 Immersion in water
method
Covers the determination of the density of natural or compacted soils, using Archimedes` principle. The method can be employed
wherever lumps of material of suitable size can be obtained and handled without disturbance. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
NZS 4402.5.1.4:1986
Soil density tests - Determination of the density of soil - Test 5.1.5 Water displacement
method
Covers the determination of the density of natural or compacted soil by measuring its mass and water displacement. The method
can be employed wherever lumps of material of suitable size can be obtained and handled without disturbance. To be read in
conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
NZS 4402.5.1.5:1986
Soil strength tests - Determination of the California Bearing Ratio (CBR) - Test 6.1.1
Standard laboratory method for remoulded specimens
Covers the determination of the CBR of a soil when compacted and tested in a laboratory. Applicable to fine, medium, and the
fraction of coarse soils passing a 19.0 mm test sieve. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 9 pages
NZS 4402.6.1.1:1986
Soil strength tests - Determination of the California Bearing Ratio (CBR) - Test 6.1.2
Standard laboratory method for undisturbed specimens
Covers the laboratory determination of the CBR of an undisturbed sample of soil. Applicable to fine soils and some medium soils. To
be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
NZS 4402.6.1.2:1986
Soil strength tests - Determination of the California Bearing Ratio (CBR) - Test 6.1.3
Standard method for in situ tests
Covers the determination of the CBR of soil in situ. Applicable to fine, medium, and some coarse soils. To be read in conjunction with
Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
NZS 4402.6.1.3:1986
NZS 4402.6.3.1:1986
NZS 4402.6.3.2:1986
Covers the determination of the unconfined comparative strength of a specimen of non-fissured cohesive soil, using a portable
compression testing machine which produces a chart record of axial load and compression. The test is limited to cylindrical
specimens nominally 40 mm diameter and 80 mm long. To be read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Soil strength tests - Determination of the penetration resistance of a soil - Test 6.5.1
Standard penetration test (SPT)
Describes the procedure for determining the resistance of soils to the penetration of a split-tube sampler, and the obtaining of
disturbed samples of soils for identification purposes.
Included in Supplement 1; not available separately
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS 4402.6.5.1:1988
Soil strength tests - Determination of the penetration resistance of a soil - Test 6.5.2 Hand
method using a dynamic cone pentrometer
Describes the procedure for determining the resistance of a soil to the penetration of a steel cone driven by a 9 kg falling mass.
Included in Supplement 1; not available separately
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS 4402.6.5.2:1988
Soil strength tests - Determination of the penetration resistance of a soil - Test 6.5.3 Cone
penetration resistance using a cone or a friction cone
Describes the procedure for determining the static cone resistance of a soil in the field using a cone and additionally the side skin
friction and friction ratio if a friction cone is used. The method permits the use of either mechanical or electrical pentrometers.
Included in Supplement 1; not available separately
$39.20+GST (Members), $49.00+GST (Retail), 9 pages
NZS 4402.6.5.3:1988
Methods of testing soils for civil engineering purposes - Soil consolidation tests - Test 7.1
Determination of the one-dimensional consolidation properties
Covers the determination of the magnitude and rate of consolidation of a saturated or near-saturated specimen of soil in the form of
a disc confined laterally, subjected to vertical axial pressure, and allowed to drain freely from the top and bottom surfaces. To be
read in conjunction with Part 1.
Looseleaf. Available separately, or in ring binder
$39.20+GST (Members), $49.00+GST (Retail), 14 pages
NZS 4402.7.1:1986
4404:2004 include requirements for earthworks and geotechnical needs, roads, stormwater, wastewater, water supply, landscape,
and network utility services. The Standard incorporates up-to-date design principles such as low impact design (LID) solutions to
stormwater management, and urban design principles that encourage more sustainable places, spaces, and networks in towns and
cities.
Please note that the CAD files are now aligned with NZS 4404:2010. Reprinted to incorporate Amendment 1:2010 which is not
available separately.
$231.20+GST (Members), $289.00+GST (Retail), 263 pages
Land development and subdivision infrastructure - CAD files
NZS 4404:2010 CAD
Standards New Zealand has had freshly-drawn CAD files created to support NZS 4404:2010. These replace the previous CAD files
which were corrupting when opened and included anomalies. The new versions include essentially the same information provided in
the published version of NZS 4404:2010 incorporating Amendment No. 1, but some layout variations and small corrections to
wording have also been included to assist users. The CAD files are supplied in .dwg .dxf and PDF formats.
$80.00+GST (Members), $100.00+GST (Retail)
Land development and subdivision infrastructure - CAD PDFs
NZS 4404:2010 CAD in PDF
Standards New Zealand has had freshly-drawn CAD files created to support NZS 4404:2010. These replace the previous CAD files
which were corrupting when opened and included anomalies. This PDF of the new CAD drawing versions includes essentially the
same information provided in the published version of NZS 4404:2010 incorporating Amendment No. 1, but some layout variations
and small corrections to wording have also been included to assist users.
$33.60+GST (Members), $42.00+GST (Retail)
Slotted countersunk (flat) head tapping screws (common head style)
AS/NZS 4404:1996
Specifies the dimensions and mechanical properties of heat-treated steel slotted (flat) head tapping screws in sizes from ST 2.2 to
ST 9.5 inclusive. Identical to and reproduced from ISO 1482:1983.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS 4405:1986
Slotted raised countersunk (oval) head tapping screws (common head style)
AS/NZS 4405:1996
Specifies the dimensions and mechanical properties of heat-treated steel slotted raised (oval) head tapping screws in sizes from ST
2.2 to ST 9.5 inclusive. Identical to and reproduced from ISO 1483:1983.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Helical lock-seam corrugated steel pipes - Design and installation
NZS 4406:1986
Lays down essential requirements for the installation of pipes manufactured to NZS 4405. Details considerations to be taken into
account in design calculations and installation procedures. Design soil compaction, design pressure, ring compression, stresses,
thickness and handling stiffness are covered. Sectional properties for each size of the four corrugations are tabulated. Appendices
include reference tables of cover limits for some railway and highway live loads. Identical to AS 1762:1984 with modifications for
New Zealand.
Adopted Standard
$57.37+GST (Members), $71.71+GST (Retail), 13 pages
Amendment A, 1986 $33.60+GST (Members), $42.00+GST (Retail)
Cross recessed pan head tapping screws
AS/NZS 4406:1996
Specifies the dimensions and mechanical properties of heat-treated steel cross-recessed pan head tapping screws in sizes from ST
2.2 to ST 9.5 inclusive. Identical to and reproduced from ISO 7049:1983.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
Methods of sampling and testing road aggregates - Preliminary and general
NZS 4407.1:1991
Covers the sampling and testing of road aggregates. Establishes definitions and requirements for test apparatus.
$51.20+GST (Members), $64.00+GST (Retail), 10 pages
NZS 4407.2:1991
Methods of sampling and testing road aggregates - Methods of sampling road aggregates
Sets out the principles to be observed in sampling naturally occurring or manufactured road aggregates and details of packaging,
transportation and subdivision of samples for testing.
$51.20+GST (Members), $64.00+GST (Retail), 6 pages
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.1 The water content of aggregate
Covers the determination of the water content of aggregate as a percentage of its dry mass by oven drying.
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS 4407.3.1:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.2 The cone penetration limit
Covers the determination of the cone penetration limit of the fine fraction of an aggregate.
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
NZS 4407.3.2:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.3 The plastic limit
Covers the determination of the plastic limit of an aggregate.
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
NZS 4407.3.3:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.4 The plasticity index
Covers the determination of the plasticity index of the fine fraction of an aggregate.
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
NZS 4407.3.4:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.5 The clay index
Outlines the method of test for a methylene blue titration test used to estimate the percentage of expansive clay material in natural
fines or rock powders.
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
NZS 4407.3.5:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.6 The sand equivalent
Covers a field or laboratory test for measuring the relative amounts of silt or clay size particles in fine aggregates or fine fractions of
aggregates.
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
NZS 4407.3.6:1991
Methods of testing road aggregates - Laboratory tests - The solid density of aggregate
particles - Test 3.7.1 Pycnometer method for particles passing the 19 mm test sieve
Covers the determination of the solid density of combined coarse and fine road aggregate particles passing a 19 mm test sieve.
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS 4407.3.7.1:1991
Methods of testing road aggregates - Laboratory tests - The solid density of aggregate
particles - Test 3.7.2 Immersion in water method for coarse aggregate
Covers the determination of the solid density of coarse aggregate particles, using Archimedes principle.
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4407.3.7.2:1991
Methods of testing road aggregates - Laboratory tests - The particle-size distribution - Test
3.8.1 Preferred method by wet sieving
Covers the determination of the particle-size distribution of an aggregate down to the 75 m fraction by wet sieving. It is applicable to
all materials including granular materials containing appreciable amounts of cohesive or non-cohesive fine particles.
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
NZS 4407.3.8.1:1991
NZS 4407.3.8.2:1991
Methods of testing road aggregates - Laboratory tests - The particle-size distribution - Test
3.8.2 Subsidiary method by dry sieving
Covers the determination of the particle-size distribution of an aggregate down to 75 m by dry sieving. Applicable to materials which
do not contain significant amounts of cohesive fines.
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.9 The cleanness value of coarse aggregate
Specifies the procedure for determining the cleanness of coarse aggregate less than 26.5 mm in size in terms of a `cleanness value`
which is a function of the amount, fineness and character of the clay-like material present, with or on the coarse aggregate particles,
for example, sealing chips.
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4407.3.9:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.10 The crushing resistance of coarse aggregate under a specific
load
Specifies a procedure for determining the crushing resistance of aggregates. Measures the percentage of fines generated by the
application of a specified load.
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4407.3.10:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.11 The weathering quality index of coarse aggregate
Specifies the procedure to assess the resistance of aggregate to the effects of wetting, drying, heating and cooling.
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4407.3.11:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.12 The abrasion resistance of aggregate by use of the Los
Angeles machine
Covers the procedure for measuring the breakdown of an aggregate subjected to abrasion in a Los Angeles testing machine.
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4407.3.12:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.13 The size and shape of aggregate particles
Covers the determination of the size and shape of aggregate particles, for example, sealing chips.
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
NZS 4407.3.13:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.14 The broken faces content of aggregate
Covers the determination of the proportion of broken faces in an aggregate test sample, or a fraction of a test sample.
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
NZS 4407.3.14:1991
Methods of sampling and testing road aggregates - Methods of testing road aggregates Laboratory tests - Test 3.15 The California Bearing Ratio (CBR)
Covers the determination of the CBR of an aggregate when compacted and tested in a laboratory. The method is applicable to
aggregates passing a 19 mm test sieve.
$39.20+GST (Members), $49.00+GST (Retail), 10 pages
NZS 4407.3.15:1991
Methods of testing road aggregates - Field tests - The density of compacted aggregate Test 4.1.1 Sand replacement method
Covers the determination in situ of the density of compacted aggregates.
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
NZS 4407.4.1.1:1991
Methods of testing road aggregates - Field tests - The field water content and field dry
density of compacted aggregate - Test 4.2.1 Method using a nuclear surface moisturedensity gauge - Direct transmission mode
Sets out the method for determining the field water content and field dry density of a compacted aggregate using a nuclear surface
moisture-density gauge in the direct transmission mode of operation. Appropriate to aggregates having a nominal maximum particle
size of 40 mm.
NZS 4407.4.2.1:1991
NZS 4407.4.2.2:1991
Methods of testing road aggregates - Field tests - The field water content and field dry
density of compacted aggregate - Test 4.2.3 Calibration of nuclear surface moisturedensity gauge for field use
Sets out the method for the calibration of a nuclear surface moisture-density gauge for field use against the results obtained by the
method for the determination of the water content of an aggregate (Test 3.1) and the method contained in Test 4.1.1.
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
NZS 4407.4.2.3:1991
Methods of testing road aggregates - Field tests - The field water content and field dry
density of compacted aggregate - Test 4.2.4 Calibration of nuclear surface moisturedensity gauge using standard blocks
Sets out the method for the calibration of a nuclear surface moisture-density gauge using standard blocks, and the checking of
density calibrations.
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
NZS 4407.4.2.4:1991
Cross recessed countersunk (flat) head tapping screws (common head style)
AS/NZS 4407:1996
Specifies the dimensions and mechanical properties of heat-treated steel cross-recessed countersunk (flat) head tapping screws
(common head style) in sizes from ST 2.2 to ST 9.5 inclusive. Identical to and reproduced from ISO 7050:1983.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 4408:1988
(Withdrawn)
Radiotelephone transmitters and receivers for the maritime mobile service operating in the
VHF bands - Technical characteristics and methods of measurement - Shipborne
equipment and limited coast stations (including DSC)
Provides minimum requirements for VHF transmitters and receivers for use on board ships in the maritime mobile services. An
annex sets out proposed variations to these requirements for application in Australia and New Zealand. This Standard is reproduced
from IEC 61097-7:1996 and varied to suit Australian/New Zealand conditions.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 45 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4415.1:2003
Radiotelephone transmitters and receivers for the maritime mobile service operating in the
VHF bands - Technical characteristics and methods of measurement - Major coast stations,
limited coast stations, ship stations and handheld stations (non DSC)
Specifies the minimum requirements for VHF transmitters and receivers and transceivers for major coastal stations and handheld
stations in the maritime mobile service. This Standard is reproduced from ETS 300 162:1998 and varied to suit Australian/New
Zealand conditions.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 54 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4415.2:2003
Marking of electrical and electronic products to indicate compliance with regulations General rules for use of the mark
Specifies the requirements for the use of a trademark, called the Regulatory Compliance Mark (RCM), on electrical and electronic
products to indicate compliance with regulations applicable to aspects of the product as covered in other parts of this Standard.
Will be superseded by AS/NZS 4417.1:2012 on 1 March 2013, but remains current until then
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 19 pages
AS/NZS 4417.1:2009
Regulatory compliance mark for electrical and electronic equipment - Part 1: Use of the
mark
Specifies the requirements for the Regulatory Compliance Mark (RCM) and its placement on electrical and electronic equipment to
indicate compliance with regulations applicable to aspects of the equipment as covered in Part 2 of this Standard.
Joint Australian/New Zealand Standard
$55.20+GST (Members), $69.00+GST (Retail), 11 pages
AS/NZS 4417.1:2012
Marking of electrical and electronic products to indicate compliance with regulations Specific requirements for electrical safety regulatory applications
Specifies the requirements that apply to the use of the Regulatory Compliance Mark (RCM) on electrical and electronic products to
indicate compliance with electrical safety regulations in Australia and New Zealand. It is applicable to low voltage electrical products
and products used in low voltage installations, but does not apply to battery-powered products except those where the batteries are
recharged in the product. It is intended to be read in conjunction with AS/NZS 4417.1, which specifies the RCM and sets out general
rules for its use.
Reprinted to incorporate Amendment 1:2010; Will be superseded by AS/NZS 4417.2:2012 on 1 March 2013, but remains current
until then
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 35 pages
AS/NZS 4417.2:2009
Regulatory compliance mark for electrical and electronic equipment - Part 2: Specific
requirements for particular regulatory applications
Specifies the requirements for the Regulatory Compliance Mark (RCM) and its placement on electrical and electronic equipment to
indicate compliance with particular regulations applicable to aspects of the equipment as detailed in this standard.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 35 pages
Amendment 1, 2010 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4417.2:2012
Marking of electrical and electronic products to indicate compliance with regulations Specific requirements for electromagnetic compatibility regulatory applications
Specifies the requirements that apply to the use of the Regulatory Compliance Mark (RCM) on products to indicate compliance with
electromagnetic compatibility regulations in Australia and New Zealand. It is intended to be read in conjunction with AS/NZS 4417.1,
which specifies the RCM and sets out general rules for its use.
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 15 pages
AS/NZS 4417.3:2009
Marking of electrical and electronic products to indicate compliance with regulations Specific requirements for radio apparatus regulatory applications
Specifies the requirements that apply to the use of the Regulatory Compliance Mark (RCM) on radio apparatus to indicate
compliance with radio communications regulations in Australia and New Zealand. It is intended to be read in conjunction with
AS/NZS 4417.1, which specifies the RCM and sets out general rules for its use.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 11 pages
AS/NZS 4417.4:2009
NZS/BS 4429:1987
(Withdrawn)
Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Standard strength classes and end fittings for string insulator units
Specifies values for the mechanical characteristics of composite string insulator units. This Standard defines the main dimensions of
the couplings to be used on composite string insulator units to allow interchangeability of units or insulators supplied by different
manufacturers and to allow, whenever practicable, interchangeability with existing installations. This Standard is based on but not
equivalent to and has been reproduced from IEC 61466-1:1997.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 20 pages
AS/NZS 4435.2:1999
This is a substantial revision of the 1985 Code of practice for swimming pools. The revision covers the essentials of design and
construction of public, institutional, and private freshwater and seawater swimming pools, and the provision of water treatment
facilities. It provides guidance on the suitable minimum requirements to set when contracting for design and construction of
swimming pools or when contemplating the purchase of a pool, and guidelines for the requirements that should be met to achieve
safety and good operational management. It does not cover the provision of heating or other special equipment, operation and
maintenance, nor the supervision necessary to ensure the physical safety of pool users.
$80.00+GST (Members), $100.00+GST (Retail), 72 pages
Oriented PVC (PVC-O) pipes for pressure applications
AS/NZS 4441:2008
Specifies the general aspects of pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for piping systems
intended to be used underground or above-ground where not exposed to direct sunlight, for water mains and for services, for
pressurized sewer systems and for irrigation systems.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 48 pages
AS/NZS 4441(Int):1996
Welded steel pipes and fittings for water, sewage and medium pressure gas
NZS 4442:1988
Applies to welded steel pipes and fittings with butt welded seams in sizes of 100 mm to 1000 mm nominal pipe sizes intended
primarily for the conveyance of water, sewage, and medium pressure gas. Specifies standard outside diameters and requirements
for commonly used fittings. Also specifies external protective coatings and internal linings.
$73.60+GST (Members), $92.00+GST (Retail), 29 pages
Office desks
AS/NZS 4442:1997
Specifies requirements and selection and evaluation criteria for office desks. This Standard was developed under a memorandum of
understanding between Standards Australia and the Australasian Furnishing Research and Development Institute (AFRDI).
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 36 pages
Office panel systems - Workstations
AS/NZS 4443:1997
Specifies requirements and selection and evaluation criteria for office workstations. This Standard was developed under a
memorandum of understanding between Standards Australia and the Australasian Furnishing Research and Development Institute
(AFR).
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 40 pages
AS/NZS 4444.2:2000
Solar heating - Domestic water heating systems - Performance rating procedure using
indoor test methods
This Standard provides an indoor test method for rating solar domestic water heating for thermal performance under benchmark
conditions. Identical to and reproduced from ISO 9459.1:1993.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
AS/NZS 4445.1:1997
AS/NZS 4448:1997
Limits and methods of measurement of radio disturbance characteristics for the protection
of receivers used on board vehicles
Specifies limits and test methods to afford protection to radios and television receivers used on board vehicles from radio
disturbance emissions originating in components intended for use in the vehicles. Identical to and reproduced from IEC/CISPR
25:1995.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 43 pages
Information and documentation - Electronic manuscript preparation and markup
AS/NZS 4449:1997
Describes four document type definitions and additional facilities conforming to AS 3514. Identical to and reproduced from ISO
12083:1994.
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 188 pages
Information and documentation - Bibliographic data element directory - Interloan
applications
Specifies and describes the data elements required in the interchange of data between interlending institutions. It also identifies
messages and their data elements, which are used in interloan transactions. Identical to and reproduced from ISO 8459-1:1988.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 22 pages
AS/NZS 4450.1:1997
AS/NZS 4450.3:1997
Information and documentation - Bibliographic data element directory - Data elements for
the exchange of cataloguing and metadata
Specifies and describes data elements required in the interchange of data between cataloguing systems and identifies messages
and their data elements which are used in cataloguing systems. Identical with and reproduced from ISO 8459-5:2002.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 72 pages
AS/NZS 4450.5:2003
NZS 4451:1974
NZS 4452:1986
(Withdrawn)
AS/NZS 4452:1997
Sets out requirements and recommendations for the storage and handling of toxic substances that in Australia, meet the Class 6.1
classification criteria of the ADG Code and in New Zealand, the Class 6.1 classification criteria of the IMDG Code and Schedules 1-4
of the New Zealand Toxic Substances Regulations 1983. The Standard applies to Class 6.1 substances and may also apply to
substances of other classes having a 6.1 Subsidiary Risk. A discussion of the hazards presented by toxic substances and a
bibliography of documents providing guidelines on the preparation of emergency plans are provided in appendices.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 49 pages
Protective clothing for users of hand-held chainsaws - Test rig for testing resistance to
cutting by a chainsaw
Specifies the requirements for a test rig for testing protective clothing for users of hand-held chainsaws for resistance to cutting by a
chainsaw. Identical to and reproduced from EN 381-1:1993.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 4453.1:1997
Protective clothing for users of hand-held chainsaws - Test methods for leg protectors
AS/NZS 4453.2:1997
Specifies the requirements for testing protective legwear for users of hand-held chainsaws for dimensional change, protective
coverage and resistance to cutting by a chainsaw. Identical to and reproduced from EN 381-2:1995.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Protective clothing for users of hand-held chainsaws - Protective legwear
AS/NZS 4453.3:1997
Specifies the requirements for the design and performance of protective trousers and leggings (chaps) for users of hand-held
chainsaws.
Reprinted to incorporate Amendment 1:1998
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
Amendment 1, 1998 $33.60+GST (Members), $42.00+GST (Retail)
Composts, soil conditioners and mulches
NZS 4454:2005
Prescribes compositional requirements, compliance requirements, sampling and testing methods for composts, soil conditioners and
mulches. Based on the equivalent Australian Standard, AS 4454:2003, the labelling requirements have been modified to fall in line
with the guidelines issued by the Ministry of Health for potting mixes. Limits for heavy metal contaminants and organic contaminant
residues have been included in alignment with the interim values of the Biosolids Guidelines issued by the New Zealand Water and
Wastes Association, 2003 (Classification a, Table 4.2 of the guidelines). Limits for indicator organisms, have been included to ensure
microbiological quality of certain categories of products.
$108.80+GST (Members), $136.00+GST (Retail), 60 pages
Masonry units, pavers, flags and segmental retaining wall units - Masonry units
AS/NZS 4455.1:2008
Provides users and specifiers with the requirements for masonry units used in pavement construction.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 28 pages
Masonry units, pavers, flags and segmental retaining wall units - Pavers and flags
AS/NZS 4455.2:2010
Specifies the requirements for pavers and flags in order to facilitate design and purchasing for segmental pavements and other
applications.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 24 pages
Masonry units, pavers, flags and segmental retaining wall units - Segmental retaining wall
units
Provides users and specifiers with the requirements for segmental retaining wall units used in segmental retaining walls.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
AS/NZS 4455.3:2008
AS/NZS 4456:2003
Provides a general introduction and a series of 19 test methods for masonry units and segmental pavers. The tests are for sampling,
mean and standard deviation, and for determining dimensions, compressive strength, breaking load, potential to effloresce, core
percentage and material thickness, moisture content and dry density, abrasion resistance, resistance to salt attack, expansion,
contraction, pitting due to salt attack, expansion, contraction, pitting due to lime particles, water absorption properties, lateral
modulus of rupture, permeability to water, rate of absorption and tensile strength.
Reprinted to append Amendment 1 Set:2004 and Amendment 2 Set:2009
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 86 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 4463:1969
(Withdrawn)
NZS/BS 4464:1969
(Withdrawn)
Information technology - Digital compression and coding of continuous-tone still images Requirements and guidelines
Specifies a process for converting and unconverting source image data to compressed image data. The source image consists of
continuous-tone still digital data. Identical to and reproduced from ISO/IEC 10918-1:1994.
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 182 pages
AS/NZS 4473.1:1997
AS/NZS 4475.0:1997
Restraint systems for motor vehicles - Performance tests - Introduction and list of methods
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 1 page
Restraint systems for motor vehicles - Performance tests - Determination of webbing
durability in adjustment duty
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 4475.1:1997
AS/NZS 4475.3:1997
Restraint systems for motor vehicles - Performance tests - Determination of locking angle
of a tilt-lock adjustment device
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 4475.5:1997
AS/NZS 4477:1997
Guide to the reprocessing of reusable containers for the collection of sharp items used in
human and animal clinical/medical applications
Provides guidelines for the emptying, cleaning and disinfection of reusable containers utilized in the collection of sharp items used in
human and animal clinical/medical applications.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
AS/NZS 4478:1997
NZS/BS 4480.2:1974
(Withdrawn)
NZS/BS 4481.2:1983
(Withdrawn)
(Withdrawn)
AS/NZS 4483.2:1999
(Withdrawn)
AS/NZS 4486.1:1997
AS/NZS 4492.1:2000
Wool - Fleece testing and measurement - Weighing and sampling greasy wool for fleece
testing and measurement
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 6 pages
Wool - Fleece testing and measurement - Determination of washing yield and clean fleece
weight
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 15 pages
AS/NZS 4492.2:2000
Wool - Fleece testing and measurement - Measurement of mean fibre diameter using
Airflow and Sonic A instruments
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 17 pages
AS/NZS 4492.3:2000
Wool - Fleece testing and measurement - Measurement of mean fibre diameter and
determination of fibre diameter distribution using SIROLAN-LASERSCAN measuring
system
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 5 pages
AS/NZS 4492.4:2000
Wool - Fleece testing and measurement - Measurement of mean fibre diameter using the
OFDA measuring system
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 7 pages
AS/NZS 4492.5:2000
AS/NZS 4492.6(Int):1997
AS/NZS 4494:1998
Specifies requirements for temple protectors to be attached to cricket helmets to mitigate the effects of a blow to the side of the head
by a cricket ball. Includes construction, testing and labelling requirements. Temple protectors complying with this Standard are not
intended to protect wearers against a severe blow from a cricket bat.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Protective headgear for cricket - Faceguards
AS/NZS 4499.3:1997
Specifies requirements for faceguards to be attached to cricket helmets to mitigate the effects of a blow to the face by a cricket ball.
Includes construction, testing and labelling requirements. Faceguards complying with this Standard are not intended to protect
wearers against a severe blow from a cricket bat.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
NZS/BS 4500.3:1973
(Withdrawn)
(Withdrawn)
Methods for evaluating clothing for protection against heat and fire - Evaluation of thermal
behaviour of materials and material assemblies when exposed to a source of radiant heat
Specifies two complementary methods (method A and method B) for determining the behaviour of materials for heat protective
clothing subjected to heat radiation. Identical to and reproduced from ISO 6942:2002.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 20 pages
AS/NZS 4502.1:2006
Methods for evaluating clothing for protection against heat and fire - Evaluation of heat
transmission of materials and material assemblies when exposed to flame
Sets out a method for determining the behaviour of protective clothing or its constituents when exposed to flame. This Standard is
identical with and reproduced from ISO 9151:1995.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 9 pages
AS/NZS 4502.2:1997
Methods for evaluating clothing for protection against heat and fire - Evaluation of the
behaviour of materials and material assemblies when exposed to small splashes of molten
metal
Sets out a method for determining the resistance of materials used in the manufacture of protective clothing to small splashes of
molten metal. This Standard is identical with and reproduced from ISO 9150:1988.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 8 pages
AS/NZS 4502.3:1997
Methods for evaluating clothing for protection against heat and fire - Evaluation of the
behaviour of materials and material assemblies when exposed to heavy splashes of molten
metal
Sets out a method for determining the resistance of materials used in the manufacture of protective clothing to molten metal splash.
This Standard is identical with and reproduced from ISO 9185:1990.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 9 pages
AS/NZS 4502.4:1997
Methods for evaluating clothing for protection against heat and fire - Evaluation of the
contact heat transmission through material and material assemblies
Sets out a method for determining the contact heat transmission of protective clothing or its constituents in the range of 100 degrees
C to 500 degrees C This Standard is identical with and reproduced from ISO 12127:1996.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 5 pages
AS/NZS 4502.5:1997
AS/NZS 4503.3:1997
NZS/BS 4504.3.3.1:1989
NZS/BS 4504.3.3.2:1989
NZS/BS 4504.3.3.3:1989
NZS 4504:1981
AS/NZS 4504.1:1998
Domestic garage doors - Methods of test - Test sample and preparation of wind pressure
test
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 1 page
Domestic garage doors - Methods of test - Wind pressure test
AS/NZS 4504.2:1998
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Domestic garage doors - Methods of test - Durability cycle test
AS/NZS 4504.3:1998
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
Firefighting waterway equipment
SNZ PAS 4505:2007
Sets out minimum manufacturing, technical and performance requirements for fire-fighting waterway equipment for use by the New
Zealand Fire Service (NZFS), the New Zealand National Rural Fire Authority (NZNRFA) and Industrial Fire Brigades. Also covers
fire-fighting waterway equipment primarily for Fire Service use when attending and dealing with emergencies.
Reprinted to incorporate Amendment 1:2011
$96.80+GST (Members), $121.00+GST (Retail), 58 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
Domestic garage doors
AS/NZS 4505:1998
Specifies requirements for the design, construction, performance and installation of domestic garage doors. Also specifies the
resultant loads on structures onto which such garage doors are mounted. An appendix gives an example of a typical marking for the
garage door or for the garage door packaging.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
NZS 4506:1978
AS/NZS 4506:1998
(Withdrawn)
NZS 4507:1978
(Withdrawn)
AS/NZS 4512:1999
NZS 4514:2009
Interconnected smoke alarms for houses
Sets out the requirements for the installation and commissioning of externally-powered interconnected smoke alarms. It also
provides information on the selection, installation, and maintenance of smoke alarms. Additional guidance has been provided for the
selection of smoke alarms, and their location to avoid nuisance activations.
$80.00+GST (Members), $100.00+GST (Retail), 31 pages
AS/NZS 4514:1997
(Withdrawn)
Fire sprinkler systems for life safety in sleeping occupancies (up to 2000 square metres)
NZS 4515:2009
Applies to buildings used solely as a residence. NZS 4515 includes care institutions, hostels, boarding houses, apartment buildings,
motels, retirement homes, rest homes, transitional houses, and hospital ward areas. The 2009 version of the Standard places a
greater emphasis on the life safety characteristics of sprinkler systems, as opposed to their property protection characteristics. This
Standard recommends the use of residential sprinkler heads as a number of important benefits are derived from their rapid response
and fire control.
$200.00+GST (Members), $250.00+GST (Retail), 127 pages
AS/NZS 4515:1998
(Withdrawn)
NZS 4516:1991
(Withdrawn)
AS/NZS 4518.1:1997
AS/NZS 4519:1997
(Withdrawn)
NZS 4520:2010
Fire-resistant doorsets
Specifies requirements for the testing, installation and maintenance of fire-resistant doorsets used to protect openings in walls and
partitions, which are required to resist the passage of fire. NZS 4520 also applies to transom panels over doors, where the panels
are contained within the door frame and form part of the doorset.
$73.60+GST (Members), $92.00+GST (Retail), 44 pages
Abrasive grains - Sampling and splitting
AS/NZS 4520:1997
Specifies a method for the sampling and splitting of a lot of abrasive grains intended for use in the manufacture of grinding wheels
and saws. This Standard is identical with and has been reproduced from ISO 9138:1993.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 2 pages
Specification for boxes for fire brigade connections
NZS 4521:1974
Specifies the requirements for enclosures for fire brigade connections to wet and dry riser inlets, automatic sprinkler system inlets,
drencher system inlets, foam inlets, water storage tanks, and to any other emergency facilities.
Reprinted to append Amendment 1:1988
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
Amendment 1, 1988 $33.60+GST (Members), $42.00+GST (Retail)
Abrasive grains - Test-sieving machines
AS/NZS 4521:1997
Specifies operational and technical requirements and guidance on the maintenance of test sieving machines. This Standard is
identical with and has been reproduced from ISO 9284:1992.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 4 pages
Underground fire hydrants
NZS 4522:2010
Specifies the dimensional, material, installation and performance requirements for screw-down and gate valve underground fire
hydrants in New Zealand. The Standard promotes the manufacture, supply and use of fire hydrants with consistent high
performance, long life and low maintenance requirements, and provides guidance on their installation. The specifications for road
hydrant markings and operation of fire hydrants are excluded.
$73.60+GST (Members), $92.00+GST (Retail), 50 pages
Bonded abrasive products - General - Designation, marking, range of outside diameters
and tolerances
Specifies basic requirements for grinding wheels, segments, sticks and bricks. This Standard does not cover diamond, cubic boron
nitride or cubic boron carbide abrasive products. This Standard is identical with and has been reproduced from ISO 525:1986.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 13 pages
AS/NZS 4523:1998
Bonded abrasive products - Dimensions - Part 1: Grinding wheels for external cylindrical
grinding between centres
Specifies the minimum dimensional requirements for bonded grinding wheels intended for external cylindrical grinding between
centres. This Standard is identical with and has been reproduced from ISO/DIS 603-1:1993.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
AS/NZS 4524.1:1998
Bonded abrasive products - Dimensions - Part 2: Grinding wheels for centreless external
cylindrical grinding
Specifies the minimum dimensional requirements for bonded grinding wheels intended for use for centreless external cylindrical
grinding. This Standard is identical with and has been reproduced from ISO/DIS 603-2:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 4524.2:1998
Bonded abrasive products - Dimensions - Part 3: Grinding wheels for internal cylindrical
grinding
Specifies the minimum dimensional requirements for Type 1 and Type 5 grinding wheels. This Standard is identical with and has
been reproduced from ISO/DIS 603-3:1996.
Joint Australian/New Zealand Standard
AS/NZS 4524.3:1998
Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tools and tool room
grinding
Specifies dimensions for a variety of grinding wheels intended for grinding or regrinding of cutting faces and edges of tools. This
Standard is identical with and has been reproduced from ISO/DIS 603-6:1996.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
AS/NZS 4524.6:1998
Bonded abrasive products - Dimensions - Part 7: Grinding wheels for off-hand grinding
AS/NZS 4524.7:1998
Specifies nominal dimensions for a variety of grinding wheels intended for grinding hand-held and manually fed workpieces. This
Standard is identical with and has been reproduced from ISO/DIS 603-7:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
Bonded abrasive products - Dimensions - Part 8: Grinding wheels for deburring and
fettling/snagging
Specifies requirements for Type 1 grinding wheels intended for rough grinding of workpieces. This Standard is identical with and has
been reproduced from ISO/DIS 603-8:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 4524.8:1998
AS/NZS 4524.9:1998
Bonded abrasive products - Dimensions - Part 10: Honing stones and superfinishings
AS/NZS 4524.10:1998
Specifies dimensions for Type 54 honing stones and superfinishings. This Standard is identical with and has been reproduced from
ISO/DIS 603-10:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Bonded abrasive products - Dimensions - Part 11: Hand finishing sticks
AS/NZS 4524.11:1998
Specifies dimensions for Type 90 hand finishing sticks. This Standard is identical with and has been reproduced from ISO/DIS 60311:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 4524.12:1998
Bonded abrasive products - Dimensions - Part 12: Grinding wheels for deburring and
fettling on a straight grinder
Specifies nominal dimensions for a variety of grinding wheels intended for deburring and fettling. This Standard is identical with and
has been reproduced from ISO/DIS 603-12:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Bonded abrasive products - Dimensions - Part 13: Grinding wheels for deburring and
fettling on a vertical grinder
Specifies nominal dimensions for a variety of abrasive products intended for deburring and fettling of a workpiece using hand-held
machines. This Standard is identical with and has been reproduced from ISO/DIS 603-13:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 4524.13:1998
Bonded abrasive products - Dimensions - Part 14: Grinding wheels for deburring and
fettling/snagging on an angle grinder
Specifies dimensions for a variety of abrasive products intended for deburring and fettling/snagging of workpieces using hand-held
machines. This Standard is identical with and has been reproduced from ISO/DIS 603-14:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 6 pages
AS/NZS 4524.14:1998
Bonded abrasive products - Dimensions - Part 15: Grinding wheels for cutting-off on
cutting-off machines or swing-frame machines
Specifies the dimensions for a variety of abrasive products intended for cutting off or slotting of any part of a workpiece. This
Standard is identical with and has been reproduced from ISO/DIS 603-15:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 4524.15:1998
Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on an
angle grinder
Specifies dimensions for flat (Type 41 ) and depressed centre (Type 42) cutting-off wheels. This Standard is identical with and has
been reproduced from ISO/DIS 603-16:1996.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 4524.16:1998
(Withdrawn)
AS/NZS 4526:1998
(Withdrawn)
AS/NZS 4530:1998
AS/NZS 4531:1998
(Withdrawn)
AS/NZS 4532:1998
(Withdrawn)
AS/NZS 4537:1999
Digital broadcasting systems for television, sound and data services - Framing structure,
channel coding and modulation for cable systems
Provides guidance to manufacturers, service providers, carriers and consumers in the design, operation and maintenance of
associated equipment and services, to ensure compatibility and optimum performance in the delivery of program content. This
Standard is identical with and has been reproduced from ETS 300 429:1994.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 15 pages
AS/NZS 4540:1999
(Withdrawn)
AS/NZS 4543.1:1999
AS/NZS 4545.2:1999
AS/NZS 4545.3:1999
Radionuclide imaging devices - Characteristics and test conditions - Gamma camera based
wholebody imaging systems
Specifies terminology and test methods for declaring the characteristics of gamma camera based wholebody imaging systems. This
Standard is identical with and has been reproduced from IEC 61675-3:1998.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 6 pages
Specification for woven wool packs for greasy wool
AS/NZS 4546:2004
In this edition requirements for mean bending length and breaking strength of nylon wool pack fabric after exposure to ultraviolet light
have been introduced. Also, in response to changing industry requirements, performance requirements have been altered for both
nylon and polyethlylene (HDPE) fabric.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 33 pages
Methods of testing woolpacks for greasy wool - Introduction and list of methods
AS/NZS 4547.0:2004
Provides the wool industry with test methods for assessing various attributes of wool packs.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 9 pages
Methods of testing woolpacks for greasy wool - Fibrillation of woven, HDPE fabric
AS/NZS 4547.1:1999
Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
Methods of testing woolpacks for greasy wool - Adhesion of wool to anti-slip coating
AS/NZS 4547.2:2004
Specifies a procedure for determining whether wool will adhere to an antislip wool pack coating.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
Methods of testing woolpacks for greasy wool - Surface frictional properties of fabric
AS/NZS 4547.3:2004
Specifies a method for determining the surface frictional properties of wool pack fabric in wet and dry conditions.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
Methods of testing woolpacks for greasy wool - Handling resistance
AS/NZS 4547.4:2004
Specifies a procedure for determining the force required to continue to pull a rod through a specimen of woven fabric.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
Methods of testing woolpacks for greasy wool - Strength of fabric after exposure to
ultraviolet radiation
Specifies a procedure for determining loss in strength of wool pack fabric specimens after exposure to ultraviolet light at elevated
temperatures.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
AS/NZS 4547.5:2004
NZS/BS 4548:1987
(Withdrawn)
Guide to long-life coatings for concrete and masonry - Wall coatings - Latex extensible
AS/NZS 4548.1:1999
Provides a guide to the features and typical characteristics of long-life extensible coatings intended for exterior or interior use on
concrete and masonry, when applied by airless spray or roller in accordance with the manufacturer's instructions.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 11 pages
AS/NZS 4548.2:1999
Guide to long-life coatings for concrete and masonry - Latex finish coatings - High-build,
low profile
Provides a guide to the features and typical characteristics of long-life, high-build, low profile latex type finish protective coatings that
are intended for exterior or interior use on concrete and masonry, when applied by airless spray or roller in accordance with the
manufacturer's instructions.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 11 pages
Guide to long-life coatings for concrete and masonry - Latex - Textured coatings - Nonaggregate
Provides a guide to the features and typical characteristics of long-life textured coatings, which do not utilize aggregates, intended for
exterior or interior use on concrete and masonry, when applied by airless spray, hopper spray or roller in accordance with the
manufacturer's instructions.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
AS/NZS 4548.3:1999
Guide to long-life coatings for concrete and masonry - Latex - Textured coatings Aggregate filled
Provides a guide to the features and typical characteristics of long-life, aggregate filled, textured coatings intended for exterior or
interior use on concrete and masonry, when applied by textured roller, hopper spray or trowel in accordance with the manufacturer's
instructions.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 10 pages
AS/NZS 4548.4:1999
Guide to long-life coatings for concrete and masonry - Guidelines to methods of test
AS/NZS 4548.5:1999
Provides guidelines for a series of test methods for long-life coatings for concrete and masonry including tests for concrete cure,
water transmission, water vapour transmission, carbon dioxide diffusion, chloride ion diffusion and crack bridging abilities.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
NZS 4551:1974
(Withdrawn)
Gas fired water heaters for hot water supply and/or central heating - Minimum energy
performance standards for gas water heaters
Specifies minimum energy performance standards (MEPS) requirements for gas water heaters intended for use with natural gas,
liquefied petroleum gas (LPG) and simulated natural gas (SNG) up to a nominal gas consumption of 50 MJ/h for storage types and
250 MJ/h for instantaneous types and which fall within the scope of AS 4552. This Standard does not specify safety requirements.
For safety requirements see AS 4552, Gas fired water heaters for hot water supply and/or central heating, or NZS 5262, Gas
appliance safety.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 16 pages
AS/NZS 4552.2:2010
NZS 4561:1973
Specifies methods and instruments for measuring the characteristics for readers specified in AS/NZS 4577:1999 (ISO 6198). It
applies to magnification, resolution, distortion, screen luminance, screen contrast and film gate temperatures. This Standard is
identical with and has been reproduced from ISO 7565:1993.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
Micrographics - Reader-printers for transparent microforms - Characteristics
AS/NZS 4579:1999
Specifies the essential performance characteristics for reader-printers designed for viewing and making hard copies from microfilm
with a maximum width of 35 mm. It applies to reader-printers with a magnification less than or equal to 50:1. This Standard is
identical with and has been reproduced from ISO 10197:1993.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Medical electrical equipment - Digital imaging and communications in medicine (DICOM) Radiotherapy objects
Defines a number of information objects applicable to the domain of radiation oncology to support the transfer of radiotherapy related
data between devices within or outside of a radiotherapy department. It is identical with and has been reproduced from IEC
61852:1998.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 82 pages
AS/NZS 4580:1999
NZS/BS 4581.1:1970
(Withdrawn)
NZS/BS 4581.2:1984
(Withdrawn)
AS/NZS 4582:2004
Amplitude modulated equipment for use in the aeronautical radio service in the frequency
range 118 MHz to 137 MHz
Provides users, manufacturers and suppliers of radiocommunications equipment intended to operate in the aeronautical mobile band
at frequencies in the range 118 MHz to 137 MHz, with the minimum technical performance characteristics required for use in the
Australian and New Zealand radio spectrum, including methods of test and measurement.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 36 pages
AS/NZS 4583:2010
AS/NZS 4584(Int):1999
AS/NZS 4585.1:1999
Sets out a method for measuring the rate of loss of styrene from contact moulded materials and to define what constitutes a low
styrene emission resin.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
Low styrene emission resins - The assessment of degree of interlaminar adhesion in
unsaturated polyester and vinyl ester resin - Glass fibre laminates
Sets out a method for assessing the interlaminar adhesion in typical contact moulded chopped strand mat laminates.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 3 pages
AS/NZS 4585.2:1999
(Withdrawn)
Vehicle immobilizers
AS/NZS 4601:1999
Sets out requirements for the design, testing and installation of vehicle security immobilizer systems for road vehicles.
Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 15 pages
Amendment 1, 2003 $33.60+GST (Members), $42.00+GST (Retail)
Low pressure copper thermal storage electric water heaters
NZS 4602:1988
Applies to the design, materials, construction, thermal insulation and performance of thermostatically controlled heaters of 6.5 to 450
L capacity designed for pressures up to 120 kPa (12 mH2O), installed in a vertical position either open-vented to NZS 4603 or valvevented to NZS 4607.
Reprinted to append Amendment 1:1990
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
Amendment 1, 1990 $33.60+GST (Members), $42.00+GST (Retail)
High visibility safety garments - Garments for high risk applications
AS/NZS 4602.1:2011
Specifies high visibility safety garment requirements for use in high risk applications without reference to particular types or styles.
This has been done so as to give the designer as much flexibility as possible in selecting a suitable garment design to meet differing
needs as regards weather conditions, type of work and the like, and to be innovative in devising means of encouraging users to wear
the garments properly.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
Installation of low pressure thermal storage electric water heaters with copper cylinders
(open-vented systems)
Applies to the installation in the vertical position of thermal storage electric water heaters complying with NZS 4602 and designed to
work on pressures not exceeding 120 kPa (12.0 m head). It is restricted to systems with open vents. Applies also to hot water
reticulation systems, to dual systems, and to the use of wetbacks or similar water heaters which supply hot water to the cylinder,
supplementing the heat derived from the electric element. Solar assisted systems are not covered.
Reprinted to append Amendment 1:1990
$68.80+GST (Members), $86.00+GST (Retail), 22 pages
Amendment 1, 1990 $33.60+GST (Members), $42.00+GST (Retail)
NZS 4603:1985
(Withdrawn)
NZS 4605:1978
(Withdrawn)
AS/NZS 4605:1999
(Withdrawn)
NZS 4606.1:1989
Specifies general constructional and performance requirements for storage water heaters of 6.5 L to 630 L capacity other than those
covered by NZS 4602. Also specifies the allowable heat loss, the provision of user-adjustable means of temperature control, and
routine and type test schedules. Gas-fired water heaters are specified by reference to the AGA/ALPGA Codes. The Standard is
based on Australian Standard AS 1056: Part 1.
Approved electrical safety Standard; Reprinted to append Amendments 1, 2 & 3
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
Amendment 1, 1991 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 1991 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 1993 $33.60+GST (Members), $42.00+GST (Retail)
Storage water heaters - Specific requirements for water heaters with single shells
NZS 4606.2:1989
Specifies constructional requirements for water containers (shells) made of single materials, viz. plastics, copper or copper alloys, or
stainless steel, but excluding low pressure water heaters with copper cylinders within the scope of NZS 4602. Gives
recommendations on maximum water temperature and specifies routine and type test schedules. Identical to AS 1056.2-1985 with
modifications for New Zealand conditions.
Approved electrical safety Standard
Adopted Standard
$43.53+GST (Members), $54.41+GST (Retail), 6 pages
Amendment A, 1989 $33.60+GST (Members), $42.00+GST (Retail)
Storage water heaters - Specific requirements for water heaters with composite shells
NZS 4606.3:1992
Specifies constructional requirements for water containers (shells) made of composite materials, viz. steel with a copper or copper
alloy insert (inner liner), or steel with a bonded inner lining of vitreous enamel or of plastics material. Gives recommendations on
maximum water temperatures, specifies methods of testing the quality of inner linings, and also routine and type test schedules.
Identical to AS 1056.3-1991 with modifications for New Zealand conditions.
Approved electrical safety Standard
Adopted Standard
$79.87+GST (Members), $99.84+GST (Retail), 13 pages
Amendment A, 1992 $33.60+GST (Members), $42.00+GST (Retail)
Installation of thermal storage electric water heaters: valve-vented systems
NZS 4607:1989
Applies to installation in domestic and light commercial establishments of thermal storage water heaters complying with NZS 4602
and NZS 4606 fitted with a pressure relief valve instead of an open vent. (For open vented systems see NZS 4603.) Referenced in
BIA Approved Document G12.
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
Control valves for hot water systems
NZS 4608:1992
Sets out the design, construction, performance and testing requirements of valves for pressure control, expansion control, pressure
relief, vacuum relief, temperature relief and non-return functions. Applies to systems with static supply pressures up to 1600 kPa
(163 mH2O) and working pressures up to 500 kPa (51 mH2O) with temperatures not normally exceeding 85 degrees C, installed to
NZS 4603 and 4607. Referenced in BIA Approved Document G12.
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
Specification for water disinfection tablets - Iodine releasing
AS/NZS 4609:1999
Sets out requirements for iodine releasing water disinfection tablets for use by individuals to disinfect small amounts of water from
untreated water supplies and water of unknown qualities.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 13 pages
NZS 4610:1982
AS/NZS 4610.3:1999
Furniture - School and educational - Tables and storage furniture - Strength, durability and
stability
Specifies requirements for strength, durability and stability of tables and storage furniture for school and educational use.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 59 pages
Non-thermostatic shower mixing valves
NZS 4611:1982
Covers the performance, materials and installation of non-thermostatic shower mixing valves. The nominal sizes covered are 15 mm
and 20 mm (0.5 in and 0.75 in) corresponding to the size of the thread of the inlet connections. Preferred direction of operation is
given.
Reprinted to append Amendment 1:1990
$46.40+GST (Members), $58.00+GST (Retail), 4 pages
Amendment 1, 1990 $33.60+GST (Members), $42.00+GST (Retail)
Domestic solar water heaters
NZS 4613:1986
Specifies solar collectors and ancillary equipment for systems with or without auxiliary heating. Annual performance of complete
systems is estimated approximately using a 3 - 4 day test procedure or assessed reliably using a 30 day test.
$68.80+GST (Members), $86.00+GST (Retail), 27 pages
Automotive brake testing equipment - Roller brake tester
AS/NZS 4613:1999
Specifies minimum performance requirements for fixed and mobile roller brake testers for light (excluding single track vehicles) and
heavy vehicles designed for normal on-road use.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 4 pages
Installation of domestic solar water heating systems
NZS 4614:1986
Covers installation of systems of fixed orientation and inclination of up to 6 m2 collector area and 450 L storage capacity, capable of
auxiliary heating and delivering potable water, but excluding space or pool heating.
Reprinted to append Erratum 1:1986
$73.60+GST (Members), $92.00+GST (Retail), 34 pages
Amendment 1, 1986 $33.60+GST (Members), $42.00+GST (Retail)
NZS 4616:1990
(Withdrawn)
NZS/BS 4620:1970
(Withdrawn)
AS/NZS 4641:2007
Electrical apparatus for detection of oxygen and other gases and vapours at toxic levels General requirements and test methods
Provides general requirements and test methods for manufacturers, testing authorities and certifying bodies concerned with electrical
apparatus for the measurement of the concentration of oxygen and toxic levels of gases and vapours.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 44 pages
Amendment 1, 2008 $28.80+GST (Members), $36.00+GST (Retail)
Gas distribution networks - Network management
AS/NZS 4645.1:2008
Specifies performance-based requirements for a fuel Gas Distribution Network safety, defining important principles throughout the
life cycle of Gas Distribution Networks. The standard provides prescriptive, deemed to comply, means of compliance in support of
some of those requirements and allow for alternative means of compliance that may be also acceptable provided the required safety
outcomes can be demonstrated.
Reprinted to incorporate New Zealand-only Amendment A:2011
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 108 pages
Amendment A, 2011 $33.60+GST (Members), $42.00+GST (Retail)
Gas distribution networks - Steel pipe systems
AS/NZS 4645.2:2008
To provide for the protection of the general public, gas distribution network operating personnel and the environment, and to ensure
safe and reliable operation of gas distribution networks that reticulate gas to consumers. It covers steel piping within gas distribution
networks covered by AS/NZS 4645.1, where the maximum allowable operating pressures up to or equal to 1050 kPa and the hoop
stress is less than or equal to 20% SMYS of the pipe. Steel piping systems for gas outside these limits are generally covered by the
AS 2885 suite of Standards and for some jurisdictions. AS/NZS 4645.1 provides for limited use up to 1965 kPa.
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 40 pages
Gas distribution networks - Plastics pipe systems
AS/NZS 4645.3:2008
Provides more detailed requirements for design, materials, construction, testing and commissioning of plastic mains and services
within a network and is to be used together with Part 1. It covers gas distribution networks covered by Part 1 of this Standard for
operating pressures up to 600 kPa.
Reprinted to incorporate Amendment 1:2010 and Amendment 2:2012
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 48 pages
Amendment 1, 2010 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Guide to determining the equivalence of food microbiology test methods - Qualitative tests
AS/NZS 4659.1:1999
Sets out guidelines for determining the equivalence of food microbiological test methods on qualitative tests. The protocol outlined in
this Standard may be used to determine whether an alternate method will yield a result equivalent to an Australian Standard or to a
Joint Australian/New Zealand Standard food microbiology method (AS 1766/AS/NZS 1766 series Standards), the result for which is
reported as `detected' or `not detected'.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 8 pages
Guide to determining the equivalence of food microbiology test methods - Quantitative
tests
Sets out guidelines for determining the equivalence of food microbiological test methods on quantitative tests. The protocol outlined
in this Standard may be used to determine whether an alternate enumeration method will yield an equivalent result to an Australian
Standard or to a Joint Australian/New Zealand Standard food microbiology method (AS 1766/AS/NZS 1766 series Standards).
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 5 pages
AS/NZS 4659.2:1999
AS/NZS 4659.3:1999
AS/NZS 4692.2:2005
AS/NZS 4695.1.1:1997
AS/NZS 4695.2.2:1996
AS/NZS 4695.2.10:1996
AS/NZS 4695.2.11:1996
AS/NZS 4695.2.12:1996
AS/NZS 4695.2.13:1996
AS/NZS 4695.2.40:1996
(Withdrawn)
AS/NZS 4695.2.41:1996
AS/NZS 4695.4:1996
AS/NZS 4695.5.1:1996
(Withdrawn)
AS/NZS 4695.7.1:1996
(Withdrawn)
AS/NZS 4695.10.2:1997
AS/NZS 4695.112:1996
AS/NZS 4695.707:1996
AS/NZS 4695.829:1996
(Withdrawn)
AS/NZS 4700.3:2002
(Withdrawn)
NZS 4701:1981
Requirements for domestic electrical appliances and equipment for reconditioning or parts
recycling
Sets out general requirements applying to used domestic appliances intended for sale for reconditioning (reuse), salvaging of parts
only (recycling), (or in New Zealand, historic collections), so that an appropriate safety outcome for the public is achieved without
preventing the recycling or resale of electrical appliances or parts which may not be safe to use.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 4 pages
AS/NZS 4701:2000
(Withdrawn)
(Withdrawn)
(Withdrawn)
NZS 4704:1994
NZS 4711:1984
(Withdrawn)
Ultrasonic power measurement in liquids in the frequency range 0.5 MHz to 25 MHz
AS/NZS 4714:2000
Specifies a method of determining the total radiated acoustic power of ultrasonic transducers being used to test the calibration of
ultrasound physiotherapy equipment. This Standard is identical with and has been reproduced from IEC 61161:1992 and its first
Amendment (1998).
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
AS/NZS 4724:2000
Demand response capabilities and supporting technologies for electrical products - Part
3.2: Interaction of demand response enabling devices and electrical products - Operational
instructions and connections for devices controlling swimming pool pump-units
Defines a set of operational instructions that will meet the requirements of remote agents wishing to control the energy consumption
of pump-units, and establishes a consistent approach to the method of connecting the demand response interface to the demand
response enabling device (DRED).
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 40 pages
AS/NZS 4755.3.2:2012
(Withdrawn)
Competencies for working with electrical equipment for hazardous areas (EEHA) Competency Standards
Specifies the competencies required for work associated with electrical equipment for hazardous areas (commonly termed Ex
equipment) and the standards to which competency is to be assessed and attributed. The competencies specified in this Standard
are intended as additional competencies to those previously acquired.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 136 pages
AS/NZS 4761.1:2008
Competencies for working with electrical equipment for hazardous areas (EEHA) - Guide to
assessing competency
This Standard provides guidance on assessing competency based on the knowledge and skills that define the Unit
Standards(NZ)/Units of Competency(AUS) described in Part 1.
Joint Australian/New Zealand Standard
$90.40+GST (Members), $113.00+GST (Retail), 44 pages
AS/NZS 4761.2:2008
AS/NZS 4761.3(Int):2000
(Superseded by AS/NZS 4761.1:2003 (in part) and AS/NZS 4761.2:2003 (in part))
AS/NZS 4761.4(Int):2000
(Superseded by AS/NZS 4761.1:2003 (in part) and AS/NZS 4761.2:2003 (in part))
(Withdrawn)
AS/NZS 4766:2006
Specifies requirements for the design and manufacture of polyethylene storage tanks that are rotationally moulded in one-piece
seamless construction. The tanks are for non-buried, vertical installation and capable of containing water, liquids used in food and
beverage manufacture and chemical solutions at atmospheric pressure.
Reprinted to incorporate Amendment 1:2010
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 32 pages
Amendment 1, 2010 $33.60+GST (Members), $42.00+GST (Retail)
Digital radio equipment operating in land mobile and fixed services bands in the frequency
range 29.7 MHz to 1 GHz - Radiofrequency requirements
Provides radiofrequency requirements for digital radio equipment operating in land mobile and fixed services radiofrequency bands
in the frequency range 29.7 MHz to 1 GHz with channel spacings up to 25 kHz.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
AS/NZS 4768.1:2010
Digital radio equipment operating in land mobile and fixed services bands in the frequency
range 29.7 MHz to 1 GHz - Methods of test
Provides the test methods to be used for establishing compliance with the minimum radiofrequency requirements for operation of the
equipment in Australian and New Zealand. Reproduced from IEC 60489-6:1999 with additions and modifications.
Joint Australian/New Zealand Standard
$188.00+GST (Members), $235.00+GST (Retail), 157 pages
AS/NZS 4768.2:2003
AS/NZS 4770:2000
Technical characteristics and test conditions for data transmission equipment operating in
the 900 MHz, 2.4 GHz and 5.8 GHz bands and using spread spectrum modulation
techniques
Specifies the minimum radiofrequency requirements for spread spectrum modulated radiocommunications equipment compliance,
including essential requirements and test methods for transmitters and receivers operating in the 900 MHz, 2.4 GHz and 5.8 GHz
bands. This Standard is an adoption, with national modifications, of ETS 300 328:1996. Appendices set out variations to ETS 300
328 for application in the Australian and New Zealand radiocommunications environment.
Reprinted to incorporate Amendment 1:2003
Joint Australian/New Zealand Standard
AS/NZS 4771:2000
Liquid-chilling packages using the vapour compression cycle - Method of rating and
testing for performance - Testing
Prescribes the method of testing liquid-chilling packages using the vapour compression cycle to determine the capacity, power and
efficiency of equipment under a specific set of conditions. It is not the intent of this Standard to provide for testing in-field
installations, where steadystate and uniform conditions are difficult to achieve and provisions for measurements are not made.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 20 pages
AS/NZS 4776.1.2:2008
AS/NZS 4776.2:2008
Specifies performance and energy efficiency specifications for tubular fluorescent lamps of length 550 mm to 1500 mm both inclusive
with wattage of 16 watts or more that are within the scope of AS/NZS 4782.1. Modified adoption of, and reproduced from, IEC
61347-2-11:2001.
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Double-capped fluorescent lamps - Performance specifications - Procedure for quantitative
analysis of mercury present in fluorescent lamps
Specifies test method procedures for quantitative analysis of mercury present in general purpose fluorescent lamps that are intended
to be sold in Australia and New Zealand.
Interim Standard - Expires 5 June 2008. An interim Standard is issued when a new or revised Standard is urgently needed in a
particular sector, but consensus to publish as a full Standard may not yet be achieved. Interim Standards are to be reviewed and reissued as final Standards within a certain time period (before the expiry date, usually less than two years)
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
AS/NZS 4782.3(Int):2006
(Withdrawn)
Occupational Health and Safety Management Systems - Specification with guidance for
use
The objective of this standard is to set auditable criteria for an occupational health and safety management system. The standard is
a specification that aims to encompass the best elements of such systems already widely used in Australia and New Zealand. It
includes guidance on how those criteria may be achieved. The standard should not be relied upon to ensure compliance with all
legal and other obligations.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
AS/NZS 4801:2001
Information processing systems - Local area networks - Overview of local area network
standards
Provides an introduction to the set of International Standards which describe local area networks, specifically those which make use
of the 48-bit address format. Identical to and reproduced from ISO/IEC TR 8802-1:1994.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
AS/NZS 4802.1:1996
AS/NZS 4802.1 Supplement 1:1994 Information processing systems - Local area networks - Overview of local area
network standards
Defines the architecture for the interconnection of IEEE 802 type LANs below the level of the MAC service, which is transparent to
logical link control and higher layer protocols. Identical to and reproduced from ISO/IEC 10038:1993.
Supplement to AS 4802.1-1992; Reprinted to incorporate Amendment 1:1997
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 163 pages
Amendment 1, 1997 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4802.1 Supplement 2:1997 Information processing systems - Local area networks - Overview of local area
network standards - System load protocol
Specifies a set of services and protocol for those aspects of management concerned with the loading of systems on IEEE 802 type
LANs. Identical to and reproduced from ISO/IEC 15802-4:1994.
Supplement to AS/NZS 4802.1:1996
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 58 pages
AS/NZS 4802.1 Supplement 3:1997 Information processing systems - Local area networks - Overview of local area
network standards - LAN/MAN management
Specifies and Open Systems Interconnection management-compatible architecture, and service and protocol elements for use in a
LAN/MAN environment for performing remote management. Identical to and reproduced from ISO/IEC 15802-2:1995.
Supplement to AS/NZS 4802.1:1996
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 83 pages
Information processing systems - Local area networks - Logical link control
AS/NZS 4802.2:1999
Specifies a description of the functions, features, protocol and services of the logical link control sublayer of the ISO/IEC 8802 LAN
protocol. This Standard is identical with and has been reproduced from ISO/IEC 8802-2:1998.
Joint Australian/New Zealand Standard
$200.00+GST (Members), $250.00+GST (Retail), 239 pages
Information processing systems - Local area networks - Carrier sense multiple access with
collision detection access method and physical layer specifications
Provides a specification for local area networks employing CSMA/CD as the access method which encompasses several media
types and techniques for signal rates from 1 Mb/s to 20 Mb/s, and provides the necessary specification and related parameter values
for 10 Mb/s and 1 Mb/s baseband implications. Specifications for 10BASE-T, 10BASE-FP, 10BASE-FB and layer management are
also included. This Standard is identical with and has been reproduced from ISO/IEC 8802-3:1996.
Joint Australian/New Zealand Standard
$338.40+GST (Members), $423.00+GST (Retail), 517 pages
AS/NZS 4802.3:1999
Information processing systems - Local area networks - Distributed queue dual bus access
method and physical layer specifications
Specifies a high-speed shared medium access protocol for use over a dual, counter flowing, unidirectional bus network. This
includes the physical layer, logical link control and medium access control sublayers. Identical to and reproduced from ISO/IEC
8802-6:1994.
Joint Australian/New Zealand Standard
$200.00+GST (Members), $250.00+GST (Retail), 363 pages
AS/NZS 4802.6:1996
AS/NZS 4802.7:1993
(Withdrawn)
AS/NZS 4802.12:2000
AS/NZS 4804:2001
AS/NZS 4805.1:2007
Accessories for electric cables - Test requirements - Power cables with extruded insulation
for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV
Specifies the type test requirements on accessories for power cables with extruded insulation and with rated voltages from 1.9/3.3
(3.6) kV up to and including 19/33 (36) kV. An adoption with national modifications of IEC 60502-4 (2005-02).
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 40 pages
Accessories for electric cables - Test requirements - Impregnated paper-insulated metalsheathed cables for rated voltages from 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV
(excluding gas-pressure and oil-filled cables)
Specifies the type test requirements on accessories for impregnated paper-insulated metal-sheathed cables with rated voltages from
1.9/3.3 (3.6) kV up to 19/33 (36) kV (excluding gas-pressure and oil-filled cables). An adoption with national modifications of part of
IEC 60055-1 (2005-05).
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 28 pages
AS/NZS 4805.2:2007
(Withdrawn)
NZS/BS 4827:1972
(Withdrawn)
Wool - Measurement of fibre properties - Measurement of the fibre length after carding
waste of scoured or carbonised wool
Sets out a method for determining the level of card waste produced during the LAC length test.
Interim standard - expires 24 July 2006. Reprinted to incorporate Amendment 1:2005. An interim Standard is issued when a new or
revised Standard is urgently needed in a particular sector, but consensus to publish as a full Standard may not yet be achieved.
Interim Standards are to be reviewed and re-issued as final Standards within a certain time period (before the expiry date, usually
less than two years)
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4844.2(Int):2002
Self-ballasted lamps for general lighting services - Test methods - Energy performance
AS/NZS 4847.1:2010
Specifies test methods for key performance attributes of self ballasted compact fluorescent lamps (CFLs) that have integrated means
for starting, controlling and stable operation.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 36 pages
Self-ballasted lamps for general lighting services - Minimum Energy Performance
Standards (MEPS) requirements
Specifies the Minimum Energy Performance Standards requirements (MEPS) for transformers and electronic step-down converters
for ELV lamps.
Reprinted to incorporate Amendment 1:2011
AS/NZS 4847.2:2010
AS/NZS 4854:2006
Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and
fine grain steels - Classification
Specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld
heat-treated condition for manual metal arc welding of non-alloy and fine grain steels with a minimum yield strength of up to 500
N/mm2 or a minimum tensile strength of up to 570 N/mm2. Identical to ISO 2560:2002.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 40 pages
AS/NZS 4855:2007
Methods for testing and rating fan coil units, unit heaters and unit coolers - Thermal and
volumetric performance for heating duties; without additional ducting
Deals with methods of carrying out thermal and volumetric tests on forced convection units containing fluid-to-air heat exchangers
and incorporating their own fans. The units are for heating applications and the tests are to be carried out on units in an essentially
clean condition.
Adopted Standard
$192.00+GST (Members), $240.00+GST (Retail), 24 pages
NZS/BS 4856.1:1972
Welding consumables - Covered electrodes for manual metal arc welding of creepresisting steels - Classification
Specifies requirements for classification of covered electrodes, based on the all-weld metal in the heat-treated condition, for manual
metal arc welding of ferritic and martensitic creep-resisting and low alloy elevated temperature steels. Identical to ISO 3580:2004.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 40 pages
AS/NZS 4856:2006
Welding consumables - Covered electrodes for manual metal arc welding of high-strength
steels - Classification
Specifies requirements for classification of covered electrodes and deposited metal in the as-welded condition and in the post-weld
heat-treated condition for manual metal arc welding of high-strength steels. Identical to ISO 18275:2005.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 40 pages
AS/NZS 4857:2006
AS/NZS 4864.2:2008
Performance of commercial ice makers and ice storage bins - Test methods for ice makers
- Environmental performance
Specifies methods of measuring the electrical power consumption of water- and air-cooled commercial ice makers connected to a
nominal 230 V mains electricity supply.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 16 pages
AS/NZS 4865.1:2008
Performance of commercial ice makers and ice storage bins - Test methods for ice storage
bins - Environmental performance
Specifies the method of measuring the theoretical storage effectiveness of factory-made ice storage bins, including the storage bins
of self-contained units and automatic dispensing machines.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 12 pages
AS/NZS 4865.2:2008
Performance of commercial ice makers and ice storage bins - Minimum energy
performance standard (MEPS) requirements
Specifies minimum energy performance standard (MEPS) requirements for ice makers and ice storage bins within the scope of
AS/NZS 4865.1:2008 and AS/NZS 4865.2:2008.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 20 pages
AS/NZS 4865.3:2008
AS/NZS 4869.2:2010
Performance of transformers and electronic step-down convertors for ELV lamps - Test
method - Energy performance
Provides the industry, consumers, test laboratories, regulators and users of transformers and electronic step-down converters used
with ELV lamps with a test method to determine energy efficiency.
Joint Australian/New Zealand Standard
$90.40+GST (Members), $113.00+GST (Retail), 48 pages
AS/NZS 4879.1:2008
Performance of transformers and electronic step-down convertors for ELV lamps Minimum Energy Performance Standards (MEPS) requirements
Specifies the Minimum Energy Performance Standards requirements (MEPS) for transformers and electronic step-down converters
for ELV lamps.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 16 pages
AS/NZS 4879.2:2010
Domestic solid fuel burning appliance - Pellet heaters - Determination of flue gas emission
AS/NZS 4886:2007
Specifies a test method for determining the rate of particulate emission from domestic pellet burning appliances and the associated
particulate emission acceptance criteria.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 32 pages
AS/NZS 4898:1997
NZS/ISO 4902:1980
NZS/ISO 4903:1989
(Withdrawn)
NZS/BS 4929.2:1973
(Withdrawn)
Incandescent lamps for general lighting service - Part 1: Test methods - Energy
performance
Specifies test methods for the energy performance of tungsten filament and tungsten halogen lamps used in general lighting
services.
Interim Standard - Expires 7 April 2013. An interim Standard is issued when a new or revised Standard is urgently needed in a
particular sector, but consensus to publish as a full Standard may not yet be achieved. Interim Standards are to be reviewed and reissued as final Standards within a certain time period (before the expiry date, usually less than two years). Reprinted to incorporate
Amendment 1:2011
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4934.1(Int):2008
AS/NZS 4934.2(Int):2008
(Withdrawn)
AS/NZS 4935:2009
Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems
AS/NZS 4936:2002
Specifies the requirements and test methods for air admittance valves including those that are integral for a fixture trap. This
Standard does not cover air admittance valves for use where the air temperature is either below 0 degrees C or above 60 degrees C.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
BS 4940:1973
(Withdrawn)
multiple refrigerated direct expansion (DX) system designed to control and monitor temperature and humidity and may include
supplementary conditioning equipment.
Joint Australian/New Zealand Standard
$90.40+GST (Members), $113.00+GST (Retail), 40 pages
Performance of close control airconditioners - Minimum energy performance standard
(MEPS) requirements
Specifies the minimum energy performance standard (MEPS) requirements for close control airconditioners that fall in the scope of
AS/NZS 4965.1. It does not specify electrical safety requirements but does specify values for cooling, as applicable: rated power
(input), rated capacity (output), energy efficiency ratio (EERS) for cooling, and minimum energy performance standard requirements.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
AS/NZS 4965.2:2008
Protective clothing for firefighters - Requirements and test methods for protective clothing
used for structural firefighting
Specifies the minimum requirements and test methods for assessing protective clothing that is intended to be worn whilst engaged in
interior attack, structural firefighting and associated activities where there is a risk of heat and/or flame.
Reprinted to incorporate Amendment 1:2010
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
Amendment 1, 2010 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 4967:2009
Heavy-road vehicles - Mechanical coupling between articulated vehicle combinations Design criteria and selection requirements for fifth wheel, kingpin and associated
equipment
Provides the attachment design forces for fifth wheel assembly and equations to determine the required D-value of components for
various combinations and applies to fifth wheel assemblies used with 50 mm, 75 mm and 90 mm kingpins and associated
equipment, used in heavy road vehicles, B-doubles and road trains, in normal use on both sealed and unsealed roads.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 12 pages
AS/NZS 4968.1:2003
Heavy-road vehicles - Mechanical coupling between articulated vehicle combinations Testing and installation of fifth wheel and associated equipment
Specifies performance requirements and recommendations for the installation of fifth wheel assemblies. Applies to fifth wheel
assemblies used with 50 mm, 75 mm and 90 mm kingpins for articulated vehicle combinations used in heavy road vehicles, Bdoubles and road trains, in normal use on both sealed and unsealed roads.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 12 pages
AS/NZS 4968.2:2003
Heavy road vehicles - Mechanical coupling between articulated vehicle combinations - Part
3: Kingpins and associated equipment
Specifies requirements for 50 mm, 75mm and 90 mm kingpins for semi-trailers used in articulated vehicles, B-doubles and road
trains, in normal use on both sealed and unsealed roads.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 32 pages
AS/NZS 4968.3:2011
AS/NZS 4994.1:2009
Temporary roof edge protection for housing and residential buildings - General
requirements
Provides requirements and guidance for designers of equipment for roof edge protection, to prevent workers from falling from roofs
or other edges of buildings under construction whilst performing any work or carrying out any inspections on roofs of all types of
buildings.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 44 pages
Temporary roof edge protection for housing and residential buildings - Roof edge
protection - Installation and dismantling
Provides guidance in the selection and use of roof edge protection equipment designed in accordance with Part 1: General
requirements and is intended to prevent workers from falling from roofs whilst performing any work or carrying out inspections on
roofs of housing and residential buildings and commercial buildings.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 28 pages
AS/NZS 4994.2:2009
Temporary roof edge protection for housing and residential buildings - Installation and
dismantling for edges other than roof edges
Improves the safety of people performing any work near openings in floors, near the edges of floors or other elevated level working
surfaces not being roofs of residential or commercial buildings.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
AS/NZS 4994.3:2010
BS 5000.16:1985
(Withdrawn)
BS 5000.17:1981
(Withdrawn)
Electric cables - Polymeric insulated - For working voltages up to and including 0.6/1 (1.2)
kV
Specifies the construction, dimensions and test requirements for single- and multicore cables insulated with polymeric materials
intended for use at working voltages up to and including 0.6/1 (1.2) kV. It does not apply to polymeric insulated cables for special
installations and service conditions or for which there are separate Australian/New Zealand Standards.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 32 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 5000.1:2005
Electric cables - Polymeric insulated - For working voltages up to and including 450/750 V
AS/NZS 5000.2:2006
Provides construction, dimensions and tests for single-core and multicore polymeric insulated and oversheathed cables up to and
including 16mm2 conductor size intended for use in power and lighting circuits in installations at working voltages up to and including
450/750 V.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 20 pages
AS/NZS 5000.3:2003
Electric cables - Polymeric insulated - Multicore control cables
Specifies the construction, dimensions and tests for screened and unscreened multicore control cables for voltages up to and
including 450/750 V intended for use in control, supervisory, protection and instrumentation circuits. It does not apply to cables used
solely for telecommunication purposes.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 6 pages
Potting mixes, composts and other matrices - Examination for legionellae
AS/NZS 5024(Int):2005
Sets out a qualitative test method for testing of potting mixes, composts and other solid matrices for Legionella species. It also
provides a quantitative test method which may be performed in addition to the qualitative test, if desired.
Interim standard - expires 11 April 2009. Reprinted to incorporate Amendment 1:2007. An interim Standard is issued when a new or
revised Standard is urgently needed in a particular sector, but consensus to publish as a full Standard may not yet be achieved.
Interim Standards are to be reviewed and re-issued as final Standards within a certain time period (before the expiry date, usually
less than two years)
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 23 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
The storage and handling of Class 4 dangerous goods
AS/NZS 5026:2012
Sets out requirements and recommendations for the safe storage and handling of flammable solids, substances liable to
spontaneous combustion, and substances that in contact with water emit flammable gases. Covers dangerous goods that, in
Australia, are classified as Division 4.1, 4.2 or 4.3 in the Australian Dangerous Goods Code (ADG Code); and, in New Zealand, meet
the 4.1, 4.2 or 4.3 classification criteria of the Hazardous Substances and New Organisms Act, 1996. The Standard also applies to
other dangerous goods that are assigned Division 4.1, 4.2 or 4.3 subsidiary risks by the ADG Code, except where more stringent
requirements apply under another relevant Standard or regulation.
Joint Australian/New Zealand Standard
$188.00+GST (Members), $235.00+GST (Retail), 124 pages
Installation of photovoltaic (PV) arrays
AS/NZS 5033:2005
Specifies electrical installation requirements for PV arrays with an open circuit voltage of up to 600 V d.c. or up to plus or minus 600
V with respect to earth.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$178.40+GST (Members), $223.00+GST (Retail), 80 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 5044:1973
(Withdrawn)
NZS/BS 5045.1:1982
(Withdrawn)
(Withdrawn)
(Withdrawn)
NZS/BS 5062.2:1985
(Withdrawn)
Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications
AS/NZS 5065:2005
Specifies requirements for polyethylene (PE) and polypropylene (PP) pipes and fittings for sewerage and drainage applications,
above and below ground, inside and outside of buildings, and intended to be used where the pipeline is operating under gravity flow
and the operating pressure is low. Includes requirements for both plain and structured wall pipes and fittings.
Reprinted to incorporate Amendment 1:2010
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 40 pages
Amendment 1, 2010 $33.60+GST (Members), $42.00+GST (Retail)
Engineering diagram drawing practice - Recommendations for general principles
BS 5070.1:1988
Sets out drawing practice common to all fields of engineering diagrams. Covers layout, types of diagrams, drawing sheets, lines,
lettering and graphical symbols.
$192.00+GST (Members), $240.00+GST (Retail), 16 pages
Amendment 1, 1994 $31.20+GST (Members), $39.00+GST (Retail)
Engineering diagram drawing practice - Recommendations for mechanical/fluid flow
diagrams
Gives principles and presentation for mechanical, hydraulic, pneumatic, topographic diagrams: block, circuit, piping, interconnection
and supplementary.
$312.00+GST (Members), $390.00+GST (Retail), 48 pages
BS 5070.3:1988
AS/NZS 5070.1:2008
NZS/BS 5073:1982
(Withdrawn)
Domestic solid fuel burning appliances - Pellet heaters - Method for determination of power
output and efficiency
Specifies a method for the determination of the average efficiency and average thermal power output from automatic feed, pellet
fuel-burning room heaters, that are intended to burn wood pellets or other suitable solid fuel.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
AS/NZS 5078:2007
Specification for safety frames and safety cabs for attachment to agricultural wheeled
tractors
Establishes requirements for safety frames and safety cabs for wheeled tractors having a mass of 762 kg or more, when fitted with a
safety frame for use in agricultural operations.
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
NZS 5101:1978
NZS 5102:1981
Specification for animal offal and meat treatment units for hydatids control
Establishes requirements for the design and manufacture of animal offal and meat treatment units for use in the control of hydatids. It
relates to units employing either heat or refrigeration methods of treatment of untreated meat and heat treatment of raw offal.
$39.20+GST (Members), $49.00+GST (Retail), 11 pages
Code of practice for the design, installation and operation of sprinkler irrigation systems
NZS 5103:1973
Sets out rules for the design, installation and operation of sprinkler systems used for the irrigation of agricultural lands, orchards,
market gardens, lawns and landscaped areas.
$46.40+GST (Members), $58.00+GST (Retail), 31 pages
NZS 5104.1:1986
NZS 5104.1.1:1986
NZS 5104.2:1986
NZS 5104.2.1:1986
NZS/BS 5119:1980
(Withdrawn)
NZS/BS 5120:1987
(Withdrawn)
NZS 5121:1972
(Withdrawn)
NZS/BS 5121:1975
(Withdrawn)
NZS/BS 5122:1986
(Withdrawn)
Heat pump water heaters - Performance assessment - Air source heat pump water heaters
AS/NZS 5125.1:2010
Specifies the test conditions and test procedures for determining the energy performance characteristics of single-circuit air source
heat pump water heaters. It applies to both stand-alone heat pump water heaters and heat pumps with the condenser integral with a
storage tank. The variation of coefficient of performance (COP) and electric power use as a function of operating conditions are
determined so that the results can be used in annual performance calculations of heat pump applications for sanitary hot water
supply applications. This Standard also specifies methods of testing and reporting the energy performance characteristics of
electrical driven heat pumps using a single refrigeration circuit and having one evaporator and one condenser. Products with two
evaporators that operate exclusively may also be tested in each mode.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 40 pages
Information and documentation - Vocabulary
AS/NZS ISO 5127:2004
Specifies international communication in the field of information and documentation. It presents terms and definitions of selected
concepts relevant to the field and identifies relations between the entries. Identical with, and has been reproduced from ISO
5127:2001.
(Withdrawn)
NZS/BS 5150:1990
(Withdrawn)
NZS/BS 5151:1974
(Withdrawn)
Specification for cast iron globe and globe stop and check valves for general purposes
NZS/BS 5152:1974
Nominal diameter range DN 10 to 450 and nominal sizes one half to 6 for nominal pressure ratings PN 10, 16 and 25.
Adopted Standard
$192.00+GST (Members), $240.00+GST (Retail), 20 pages
Amendment 1, 1977 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 1982 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 1984 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 4, 1989 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 5153:1974
(Withdrawn)
NZS/BS 5154:1991
(Withdrawn)
NZS/BS 5155:1984
(Withdrawn)
Specification for predominantly key-operated cast iron gate valves for waterworks
purposes
Two types of valves in the range of sizes DN 50 to DN 600 for nominal pressures PN 10, PN 16 and PN 25. Type A valves are for Tkey operation only and type B valves, which are designed for heavier duty than type A valves, are usually for key/bar operation.
Adopted Standard
$272.00+GST (Members), $340.00+GST (Retail), 20 pages
Amendment 1, 1987 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 1989 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 5163:1986
NZS/ISO 5166:1982
(Withdrawn)
NZS 5202:1979
(Withdrawn)
NZS 5203:1974
NZS 5208:1974
NZS 5212:1974
NZS 5214:1974
NZS 5215:1974
(Withdrawn)
NZS 5216:1974
(Withdrawn)
NZS/BS 5216:1991
(Withdrawn)
NZS 5217:1974
(Withdrawn)
NZS 5219:1974
(Withdrawn)
NZS 5220:1974
(Withdrawn)
NZS 5222:1976
Code of practice for high pressure gas and petroleum liquids pipelines - High pressure gas
pipelines
Minimum safety requirements and guidance as to good practice to be observed for the transmission of gas within pipelines and other
facilities. Covers design, installation, inspection, testing, safety aspects of operation and the maintenance of gas pipelines and
related facilities, where Maximum Working Pressure may exceed 2000 kPa. Also applies to Gathering Lines, regardless of pressure.
$167.20+GST (Members), $209.00+GST (Retail), 77 pages
NZS 5223.1:1985
Code of practice for high pressure gas and petroleum liquids pipelines - Petroleum liquids
transportation pipelines
Comprises an amendment to the American National Standard ANSI/ASME 31.4-1979 to ensure its suitability for New Zealand
conditions. To be read in conjunction with ANSI/ASME 31.4-1979.
$73.60+GST (Members), $92.00+GST (Retail), 44 pages
NZS 5223.2:1987
NZS 5224.1:1980
(Withdrawn)
NZS 5224.2:1980
(Withdrawn)
NZS 5228.1:1987
Code of practice for the production and use of biogas, farm scale operation - Uses of
biogas
Provides information on the utilization of the biogas produced by the plant.
Reconfirmed in 1993
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
NZS 5228.2:1987
NZS 5231:1980
NZS/BS 5233:1986
(Withdrawn)
NZS 5234:1990
(Withdrawn)
NZS 5235.1:1991
NZS 5235.2:1988
(Withdrawn)
(Withdrawn)
NZS 5246.2:1990
(Withdrawn)
NZS/BS 5252:1976
(Withdrawn)
Gas measurement
NZS 5259:2004
Specifies acceptance tests for gas meters and correctors, gas meter selection and installation, and provides for conversion of
measured volume to energy.
Reprinted to incorporate Amendment 1:2009
$188.00+GST (Members), $235.00+GST (Retail), 80 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Gas installation
NZS 5261:2003
Legislative changes in 1992 removed the responsibility for inspection and certification of gas installations from the gas suppliers and
instituted a regime of gas certification by a person authorized under the Plumbers, Gasfitters and Drainlayers Act. This Standard in
Part 1 details the various aspects of a gas installation that contribute to its safety, stating performance criteria that shall be achieved
to ensure that the legislative requirements for safety of gas installations are met. Part 2 gives the gasfitter more detailed information
as a means of compliance with these performance criteria for small installations, and Part 3 gives references for use in the design
and specification of larger installations. The means of compliance in Parts 2 and 3 are not the only means of compliance with the
performance criteria in Part 1. Gas installations should be undertaken by persons authorized under the Plumber Gasfitters and
Drainlayers Act 1976.
A5 in size. Reprinted to incorporate Amendment 1:2005 and Amendment 2:2007, including Appendix O
$108.80+GST (Members), $136.00+GST (Retail), 172 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Appendix H to NZS 5261:2003 Gas installation - Guidelines for gas appliance commissioning (Appendix H)
Separate A4-sized version of the guidelines for gas appliance commissioning (Appendix H). It is also included in NZS 5261:2003, but
as A5 in size. Please note that these are general guidelines. They should not be used in place of the specific commissioning
instructions that are required to be part of the instructions accompanying the appliance (refer to NZS 5262 and AS 3645).
$33.60+GST (Members), $42.00+GST (Retail), 2 pages
Appendix I to NZS 5261:2003 Gas installation - Large installation commissioning (Appendix I)
Separate A4-sized version of the typical commissioning procedure for large installations (Appendix I). It is also included in NZS
5261:2003, but as A5 in size. Please note that these are general guidelines. They should not be used in place of the specific
commissioning instructions that are required to be part of the instructions accompanying the appliance (refer to NZS 5262 and AS
3645).
$33.60+GST (Members), $42.00+GST (Retail), 3 pages
Appendix O to NZS 5261:2003 Gas installation - Gas installation checklist (Appendix O)
Separate A4 sized version of the gas installation checklist (Appendix O). It is also included in the new Amendment 2 to NZS
5261:2003, but as A5 in size.
$33.60+GST (Members), $42.00+GST (Retail), 2 pages
Gas appliance safety
NZS 5262:2003
Sets out the essential safety requirements for all gas appliances intended for installation or use in New Zealand. It is not a design
code and therefore it does not address matters of performance, appearance or durability except where they are relevant to safety. It
covers all gas appliances and components supplied with them, that use, or are designed to use, gas, whether or not they also use, or
are designed to use, any other form of energy.
Superseded by NZS/AS 3645.1(Int):2010, NZS/AS 3645.2(Int):2010, and NZS 5266(Int):2011 but remains current until no longer
cited in legislation. Reprinted to incorporate Amendment 1:2005
$85.60+GST (Members), $107.00+GST (Retail), 28 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Gas detection and odorization
NZS 5263:2003
This standard ensures that persons are warned of the presence of escaping gas well before gas concentrations in the atmosphere
reach levels capable of causing a hazard. It identifies when and where odorization is required as the means of detection and where
other means of detection can be used. In addition, the Standard specifies minimum odorant concentrations in gas, which include an
allowance for wide variation in human olfactory responses and makes requirements for olfactory tests. This Standard incorporates
and replaces the requirements of the New Zealand Gas Code of Practice for Odorisation of Gas (NG GCP 3:1993).
Reprinted to incorporate Amendment 1:2009
$108.80+GST (Members), $136.00+GST (Retail), 45 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
(Withdrawn)
NZS/BS 5315:1991
(Withdrawn)
NZS/BS 5323:1980
(Withdrawn)
NZS/ISO 5343:1983
(Withdrawn)
NZS 5351:1972
(Withdrawn)
NZS/BS 5351:1986
(Withdrawn)
NZS/BS 5352:1981
(Withdrawn)
(Withdrawn)
NZS 5411:1991
Specification for loading door aperture dimensions of road vehicles used for the bulk
transportation of meat
Specifies the minimum dimensions of the clear aperture required for the loading door in the body of trucks and trailers used for the
bulk transportation of meat.
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
NZS 5412:1982
NZS 5413:1993
Code of practice for the manufacture and use of stock crates on heavy vehicles
Applies to stockcrates fitted to vehicles with a GVM of 6000 kgs or greater, used for the cartage of livestock, and specifies the
minimum requirements for the design, performance and construction of stockcrates and effluent containment devices.
Reprinted to append Amendment 1:2000
$56.80+GST (Members), $71.00+GST (Retail), 24 pages
Amendment 1, 2000 $33.60+GST (Members), $42.00+GST (Retail)
Specification for the construction of traffic signs
NZS 5414:1977
Relates to plain and reflectorized signs of all types (not internally-illuminated) which are used in connection with the movement of
traffic, and establishes criteria for long-term visual performance and structural integrity. Requirements are given for durability,
including weather resistance, and recommended methods of construction to achieve the necessary performance.
Reconfirmed in 1984
$46.40+GST (Members), $58.00+GST (Retail), 24 pages
Traffic hazard warning lamps
NZS 5415:1988
Applies to warning lamps designed to call attention to or delineate the location of temporary hazards to vehicular traffic. Includes
requirements for the photometric performance of various types of lamp, to ensure that they will provide an effective warning signal,
and covers the specific requirements for design and construction of battery-operated lamps. It also requires the provision of facilities
which will enable the lamps to be effectively used and readily maintained. Identical to AS 1165:1982 with modifications for New
Zealand.
Adopted Standard
$79.87+GST (Members), $99.84+GST (Retail), 22 pages
Amendment A, 1988 $33.60+GST (Members), $42.00+GST (Retail)
NZS 5417:1986
Transportation containers for hazardous substances - Specification for tanks for the multimodal transportation of hazardous liquids
Requirements for design, construction, testing, and use of rigid portable metal tanks of greater than 450 L capacity for the carriage of
hazardous liquids within New Zealand by any combination of road, rail and sea, but not air. Requirements are specifically for Type 1
tanks and the lower pressure-rated Type 2 tanks are included by inference. Not intended to cover tanks for use in one transport
mode only.
Reprinted to append Corrigendum 1:1984
$73.60+GST (Members), $92.00+GST (Retail), 79 pages
Amendment 1, 1984 $33.60+GST (Members), $42.00+GST (Retail)
NZS 5418.1:1983
Transportation containers for hazardous substances - Specification for small packages for
transportation by land, sea and air
Applies to packages that, in general, have a maximum net weight of 400 kg or a maximum capacity of 250 L. May be extended to
cover containers over 450 L constructed as specified.
$51.20+GST (Members), $64.00+GST (Retail), 15 pages
NZS 5418.2:1983
NZS 5419:1991 (AS 1638-1991) Motor vehicles - Light alloy road wheels
Sets out minimum requirements for type approval based on performance testing of light aluminium alloy and magnesium alloy road
wheels for vehicles with a gross mass not exceeding 3.5t. Wheels may be cast, wrought or of composite construction. Applies to
wheels which are designed for normal driving conditions, and does not purport to apply to wheels which will not fracture or fail under
conditions such as may be experienced in an accident. It should be noted that wheels conforming to this Standard may fracture
under conditions similar to those which produce severe buckling or failure in steel wheels.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 20 pages
NZS 5420:1980
(Withdrawn)
NZS 5421:1981
(Withdrawn)
NZS 5422.1:1987
Code of practice for the use of LPG and CNG fuels in internal combustion engines - LPG
fuel
Applies to the design, construction, installation, operation, maintenance and fuelling of liquefied petroleum gas (LPG) systems where
LPG is used either wholly or in part as a fuel for internal combustion engines. Covers the special requirements of industrial trucks
and forklifts.
Superseded in part by AS/NZS 1425:1999 but Section 10 remains current. Reprinted incorporating Amendment 1
$73.60+GST (Members), $92.00+GST (Retail), 36 pages
Amendment 1, 1989 $33.60+GST (Members), $42.00+GST (Retail)
Code of practice for the use of LPG and CNG fuels in internal combustion engines - CNG
fuel
Applies to the design, construction, installation, operation, maintenance and fuelling of compressed natural gas (CNG) systems
where CNG is used either wholly or in part as a fuel for internal combustion engines. In general it is directed towards vehicle
installations. Covers special requirements of industrial and forklift trucks.
Superseded in part by AS/NZS 2739:1999 but Section 10 remains current. Reprinted incorporating Amendment 1
$68.80+GST (Members), $86.00+GST (Retail), 32 pages
Amendment 1, 1989 $33.60+GST (Members), $42.00+GST (Retail)
NZS 5422.2:1987
NZS 5422.3:1991
Method for specifying thermal insulating materials on pipes, ductwork and equipment (in
the temperature range -40 degrees C to +700 degrees C)
Insulation of surfaces of process plant, vessels, tanks, ducts, pipelines, boilers and ancillary plant. Domestic, commercial and
industrial applications for heating fluids and raising steam for ventilation and for refrigeration and air conditioning.
Adopted Standard
$356.00+GST (Members), $445.00+GST (Retail), 64 pages
NZS/BS 5422:1990
Specification for repairing and retreading car, truck and bus tyres
NZS 5423:1996
Specifies the minimum requirements for the repairing and retreading of car, truck and bus pneumatic tyres used in highway service.
It specifies certain constructional features such as the examination, limits of damage, preparations and permissible repairs of the tyre
carcass before processing, and the marking and inspection of the tyre after curing. Minimum performance levels are also given.
Except where otherwise stated, the requirements apply to both tubed and tubeless tyres.
Reprinted to append Amendment 1:1998
$68.80+GST (Members), $86.00+GST (Retail), 19 pages
Amendment 1, 1998 $33.60+GST (Members), $42.00+GST (Retail)
NZS 5424:1980
(Withdrawn)
Code of practice for CNG compressor and refuelling stations - On site storage and location
of equipment
Provides planning formation, procedures, standards and guidance in the procuring of equipment for the establishment of a CNG
compressor and refuelling station.
Approved electrical safety Standard; Reprinted to append Amendment 1:1995
$96.80+GST (Members), $121.00+GST (Retail), 43 pages
Amendment 1, 1995 $33.60+GST (Members), $42.00+GST (Retail)
NZS 5425.1:1994
Code of practice for CNG compressor and refuelling stations - Compressor equipment
NZS 5425.2:1996
Specifies requirements that apply to natural gas compressors designed as suitable for continuous full load duty, mechanically,
electrically or hydraulically powered and intended for cylinder refilling applications, together with their control systems and essential
safety equipment. Such compressors are usually, but not necessarily, multistage reciprocating compressors with cooled lubricated
cylinders of either trunk type or crosshead design.
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
Code of practice for CNG compressor and refuelling stations - Metering devices - Division
3.1P Metering method using tables and calculator programme
Sets out a method for metering CNG by measuring the residual pressure of gas in the vehicle cylinder, the ambient air temperature
adjacent to the gas storage supply, the final fill pressure of the vehicle cylinder and by noting the capacity of the vehicle cylinder.
$51.20+GST (Members), $64.00+GST (Retail), 16 pages
NZS 5425.3.1P:1985
Code of practice for CNG compressor and refuelling stations - Metering devices - Division
3.2 Installation and operation of on-line metering devices
Deals with on-line metering devices fitted to the fill line and measuring the quantity of CNG which has passed through the refuelling
line during a specific filling operation. Covers requirements for the installation and the operation of these instruments in relation to the
operating principle. Apart from the quantity, the pressure at the end of filling has to be measured and displayed.
Reprinted to append Amendment 1:1996
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
Amendment 1, 1996 $33.60+GST (Members), $42.00+GST (Retail)
NZS 5425.3.2:1984
Code of practice for CNG compressor and refuelling stations - Metering devices - Division
3.3 Requirements for type approval of on-line metering devices
Relates to measuring systems for CNG, incorporating on-line CNG flow meters.
Reprinted to append Amendment 1:1993
$51.20+GST (Members), $64.00+GST (Retail), 22 pages
Amendment 1, 1993 $33.60+GST (Members), $42.00+GST (Retail)
NZS 5425.3.3:1984
Code of practice for CNG compressor and refuelling stations - CNG trickle fill stations on
commercial and industrial premises
The object of this Standard is to provide planning information, procedures, standards and guidance for the establishment of a CNG
compressor station utilizing a trickle fill refuelling system.
Reprinted to append Amendment 1:1995
$73.60+GST (Members), $92.00+GST (Retail), 31 pages
Amendment 1, 1995 $33.60+GST (Members), $42.00+GST (Retail)
NZS 5425.4:1994
NZS 5426.1:1980
NZS 5426.2:1980
NZS 5426.3:1980
NZS 5426.4:1980
NZS 5426.5:1980
NZS 5426.6:1980
(Withdrawn)
Transport of dangerous goods on land - Part 2: List of dangerous goods CDROM version
Part 2 contains information including the United Nations list of dangerous goods and special provisions. The 2012 version now
incorporates quantity limits for dangerous goods in excepted quantities, additions and amendments to Table 2 in section 2, and
Tables 3 and 4 have been updated.
CDROM version
$148.80+GST (Members), $186.00+GST (Retail), 422 pages
Transport of dangerous goods on land - A4-sized colour chart
NZS 5433B:2012
Pack of 10 A4 laminated colour charts to NZS 5433:2012 shows the segregation of packages for each class of dangerous goods.
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
Transport of dangerous goods on land - A0-sized colour poster
NZS 5433D:2012
Laminated large wall chart to NZS 5433:2012 shows segregation of packages for each class of dangerous goods.
$60.00+GST (Members), $75.00+GST (Retail), 1 page
Transport of dangerous goods on land - Dangerous goods declaration and packaging
declaration forms (5 pack)
Dangerous goods declaration forms from NZS 5433:2012. Comprises a pack of 5 pads of 50 forms each.
Transport of dangerous goods on land - Dangerous goods declaration and packaging declaration forms
$40.00+GST (Members), $50.00+GST (Retail), 250 pages
NZS 5433F:2012
NZS 5433H.1:2001
(Withdrawn)
NZS 5433H.2:2001
(Withdrawn)
NZS 5433T:1999
(Withdrawn)
(Withdrawn)
NZS 5439:1986
Lighting and retroreflectors for pedal cycles - Specification for lamp units and
retroreflectors suitable for fitting to pedal cycles
Covers the photometric and physical requirements for lamp units and retroreflectors for use on pedal cycles.
$56.80+GST (Members), $71.00+GST (Retail), 13 pages
NZS 5441.1:1987
NZS 5441.2:1987
Lighting and retroreflectors for pedal cycles - Code of practice for the fitting of lamp units
and retroreflectors to pedal cycles
Contains details for the fitting of lamp units and retroreflectors to pedal cycles to provide adequate conspicuity for the pedal cycle to
be used on the road by day and night.
$46.40+GST (Members), $58.00+GST (Retail), 7 pages
NZS 5455:1989
(Withdrawn)
NZS 5463:1989
NZS 5464:1990
NZS 5466.3:1991
NZS 5466.4:1991
(Withdrawn)
BS 5556:1978
(Withdrawn)
NZS/BS 5590:1978
(Withdrawn)
NZS 5601:1987
(Superseded)
AS/NZS 5601.2:2010
NZS 5602:1987
(Superseded)
NZS 5603:1987
(Superseded)
Water quality - Sampling - Guidance on sampling from lakes, natural and man-made
AS/NZS 5667.4:1998
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
of water from natural and man-made lakes. It is technically equivalent to and has been reproduced from ISO 5667-4:1987.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 5 pages
AS/NZS 5667.5:1998
Water quality - Sampling - Guidance on sampling of drinking water and water used for food
and beverage processing
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
of drinking water and water used for food and beverage processing. It is identical with and has been reproduced from ISO 56675:1991.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 8 pages
Water quality - Sampling - Guidance on sampling of rivers and streams
AS/NZS 5667.6:1998
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
from rivers and streams. It is identical with and has been reproduced from ISO 5667-6:1990.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
Water quality - Sampling - Guidance on sampling of water and steam in boiler plants
AS/NZS 5667.7:1998
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of water
samples and steam in boiler plants. It is identical with and has been reproduced from ISO 5667-7:1993.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Water quality - Sampling - Guidance on the sampling of wet deposition
AS/NZS 5667.8:1998
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
of wet deposition. It is identical with and has been reproduced from ISO 5667-8:1993.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
Water quality - Sampling - Guidance on sampling from marine waters
AS/NZS 5667.9:1998
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
from marine waters. It is technically equivalent to and has been reproduced from ISO 5667-9:1992.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 9 pages
Water quality - Sampling - Guidance on sampling of waste waters
AS/NZS 5667.10:1998
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
of waste water. It is identical with and has been reproduced from ISO 5667-10:1992.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 10 pages
Water quality - Sampling - Guidance on sampling of groundwaters
AS/NZS 5667.11:1998
Provides detailed guidance on the design of sampling programs, sampling techniques and the handling and preservation of samples
of groundwater. It is technically equivalent to and has been reproduced from ISO 5667-11:1993.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 11 pages
Water quality - Sampling - Guidance on sampling of bottom sediments
AS/NZS 5667.12:1999
Provides guidance on the sampling of sedimentary materials from inland rivers and streams; lakes and similar standing bodies of
water; and estuarine and harbour areas. Open ocean sediments and sludges from industrial and sewage works are specifically
excluded. This Standard is identical with and has been reproduced from ISO 5667-12:1995.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 34 pages
NZS/BS 5669.4:1989
(Withdrawn)
BS 5685.1:1979
(Withdrawn)
NZS 5701:1991
(Withdrawn)
NZS 5702:1991
(Withdrawn)
In-service safety inspection and testing Second-hand electrical equipment prior to sale
AS/NZS 5761:2011
Covers the inspection and testing process to be followed prior to sale of a second-hand electrical appliance so that when the
appliance re-enters service, protection against hazards to the user, such as electrical shock, mechanical injury, or electrical fire, is
ensured as far as practicable.
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 36 pages
In-service safety inspection and testing - Repaired electrical equipment
AS/NZS 5762:2011
Covers the testing and inspection process following the repair of electrical appliances so that when the appliance re-enters service,
protection against hazards such as electrical shock, mechanical injury, or electrical fire, is ensured as far as possible.
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 34 pages
Milk. Determination of freezing point. Thermistor cryoscope method
NZS/ISO 5764:1987
Specifies a method for the determination of the freezing point of raw, pasteurized, UHT-treated or sterilized whole milk, partially
skimmed milk and skimmed milk.
Adopted Standard
$71.43+GST (Members), $89.29+GST (Retail), 6 pages
Specification for safety requirements for children`s high chairs and multi-purpose high
chairs for domestic use
Safety requirements and methods of test for high chairs and multi-purpose chairs which may be convertible to low chairs, low chairs
with tables, baby walking frames, pushchairs, swings, car chairs or reclining low chairs. Covers materials, construction, performance,
marking and instructions.
Reprinted to incorporate Amendment 1:1991
Adopted Standard
$192.00+GST (Members), $240.00+GST (Retail), 20 pages
Amendment 1, 1991 $33.60+GST (Members), $42.00+GST (Retail)
NZS/BS 5799:1986
(Withdrawn)
NZS 5803:1977
NZS 5804:1986
NZS 5806:1980
(Withdrawn)
NZS 5809:1980
NZS 5810:1992
NZS 5811.1:1981
NZS 5811.2:1981
NZS 5812:1982
NZS 5813:1982
(Withdrawn)
NZS 5815:1985
(Withdrawn)
NZS 5816:1986
NZS 5817:1983
NZS 5818:1982
(Withdrawn)
Laser safety - Plain language code of practice for the safe use of lasers in surveying,
levelling and alignment
Reconfirmed: 1990
Outlines precautions for using visible light lasers for surveying, levelling and alignment purposes.
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
NZS 5821.2:1981
Laser safety - Plain language code of practice for the safe use of lasers in teaching
Reconfirmed: 1990
Explains the hazards and outlines precautions in the use of visible light lasers employed for demonstration and practical instruction
purposes in secondary schools and universities.
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
NZS 5821.3:1981
Prevention of ingestion and inhalation hazards in toys intended for use by children under
three years of age
Sets out safety requirements and test methods for the prevention of ingestion and inhalation hazards in toys intended for use by
children under three years of age. These are extracts from NZS 5820:1982 which meet the requirements of the Product Safety
Standards (Children`s Toys) Regulations 1992.
$73.60+GST (Members), $92.00+GST (Retail), 48 pages
NZS 5822:1992
Specification for buoyancy aids and marine safety harnesses and lines
NZS 5823:2005
Sets out general and specific requirements for the following types of buoyancy aids for surface water use such as boating and water
skiing: coastal lifejackets for use in coastal waters; lifejackets for use in sheltered waters; buoyancy vests; buoyancy aid wet suits;
buoyancy garments; rescue buoys; float-off buoyancy aids and specialist lifejackets. Also covers selection of the various buoyancy
aids and their care. Sets out requirements for safety harnesses and lines for use by yachtsmen and other boat users. Specifies
general design requirements, constructional requirements, test methods and requirements for individual components, together with a
performance test and labeling requirements for the finished article.
Reprinted to incorporate Amendment 1:2011
$108.80+GST (Members), $136.00+GST (Retail), 92 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
Child-resistant packages
NZS 5825:1991
Specifies requirements for packages designated as resistant to opening by children under 5 years of age. For medicinal products
both reclosable and non-reclosable packages are covered but for other products reclosable types of package only are specified.
$68.80+GST (Members), $86.00+GST (Retail), 18 pages
Pool water quality
NZS 5826:2010
NZS 5826 addresses the essential aspects of the operation and maintenance of pools with a focus on pool water quality criteria
including methods of water treatment to ensure the risk to public health is minimised. NZS 5826 does not cover the maintenance of
heating, mechanical, or electrical equipment used by pools. The design of swimming pools is covered by NZS 4441. This Standard
covers all treated freshwater and seawater swimming pools, spa pools, and geothermal public and private pools, during use.
$108.80+GST (Members), $136.00+GST (Retail), 132 pages
NZS 5827:1988
(Withdrawn)
commentaries as guidance and includes inspection checklists based on a risk management framework to assist in establishing
inspection, and maintenance processes to identify and address playground risk.
$68.80+GST (Members), $86.00+GST (Retail), 76 pages
NZS 5829.1:1987
(Withdrawn)
NZS 5829.2:1987
(Withdrawn)
(Withdrawn)
NZS 5836:1985
(Withdrawn)
NZS 5838:1986
(Withdrawn)
Specification for high visibility garments and accessories for road users
NZS 5839:1986
Specifies required performance criteria for retroreflective and high visibility fabrics and garments worn by road users, particularly
pedestrians, children, joggers, cyclists and roadworkers. Materials are graded into 3 classes according to photometric performance:
(1) high performance on occupational garments or visibility accessories which are worn regularly at night-time; (2) intermediate
performance for recreational garments or accessories or where occasional night-time use is anticipated; and (3) material with other
required properties in addition to night-time visibility, such as day-time visibility.
$56.80+GST (Members), $71.00+GST (Retail), 13 pages
NZS 5840:1988
NZS 5841.1:1988
NZS 5842:1989
(Withdrawn)
NZS 5843:1988
(Withdrawn)
NZS 5844:1989
(Withdrawn)
NZS 5845:1989
NZS 5846:1988
(Withdrawn)
NZS 5847.1:1988
(Withdrawn)
(Withdrawn)
(Withdrawn)
NZS 5857:1993
(Withdrawn)
(Withdrawn)
NZS 5901.2:1987
NZS 5901.3:1974
NZS 5902.1:1986
NZS 5902.2:1976
NZS 5902.3:1976
NZS 5902.4:1976
(Withdrawn)
NZS 5902.5:1981
NZMP 5905:1981
NZMP 5906:1984
NZS 5931:1972
(Superseded by BS 1347)
(Withdrawn)
NZMP 6003:1999
(Withdrawn)
Safer electrical installations in homes for children, the elderly and people with disabilities
NZMP 6004:1999
This Handbook is intended as a guide to the electrical services that can be usefully installed in homes used by children, the elderly,
and those with disabilities. While the Handbook is specifically concerned with domestic installations, the information included will also
benefit commercial homes, day-care centres and hospitals.
$46.40+GST (Members), $58.00+GST (Retail), 28 pages
BS 6007:1983
(Withdrawn)
NZS 6101.1:1988
NZS 6101.2:1990
NZS 6101.3:1991
Code of practice for the storage, handling and maintenance of automotive lead-acid starter
batteries
Covers procedures for the distribution and warehousing of new batteries up to the time of sale to the end user. Relates to lead-acid
batteries which are stored in ambient temperatures between 0 degrees C and 32 degrees C, and intended for use in motor vehicles,
motor boats, tractors, or any other industrial application where regulated charging systems are fitted.
Reconfirmed in 1991
$46.40+GST (Members), $58.00+GST (Retail), 12 pages
NZS 6102:1976
NZS 6103:1979
(Withdrawn)
NZS/ISO 6103:1986
(Withdrawn)
(Withdrawn)
(Withdrawn)
NZS 6109.2:1988
NZS 6110:2007
Electrical installations - Floor and ceiling heating systems
Provides guidance on the installation of floor and ceiling heating systems. It specifies how floor and ceiling heating systems can be
installed when they are either a heating unit, heating cable, or flexible sheet heating element, the installation of which is not
prescribed electrical work as defined in the Electricity Regulations. This Standard is intended to be used in conjunction with AS/NZS
3000 or AS/NZS 3018, and is intended to be used as a means of compliance with the relevant requirements of the New Zealand
Electricity Regulations.
$46.40+GST (Members), $58.00+GST (Retail), 17 pages
NZS 6112:1989
Electrical installations - Requirements for the safe supply of electricity to installations and
equipment operating at non-standard voltages and frequencies
Covers installations and equipment sourced from outside New Zealand, and which operate at voltages and/or frequencies other than
those used in New Zealand, ensuring they can be safely supplied from the New Zealand electricity supply. Supply of electricity to
aircraft is outside the scope of this Standard, nor is it intended to cover hazardous area, electromedical or ELV installations or
equipment. Note: Amendment 1 was published on 26 January 2007 to withdraw Section 6 and Appendix B of the Standard pending
further assessment. The remainder of NZS 6114:2006 remains in place as a New Zealand Standard.
Reprinted to incorporate Amendment 1:2007
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
NZS 6114:2006
BS 6179:1982
(Withdrawn)
NZS 6200:1988
NZS 6203.1:1987
(Withdrawn)
NZS 6205.1:1989
NZS 6205.2:1989
NZS 6208.1:1980
(Withdrawn)
NZS 6208.2:1980
(Withdrawn)
NZS 6208.4:1980
(Withdrawn)
NZS 6208.5:1984
(Withdrawn)
NZS 6210:1984
(Withdrawn)
Thermostats and thermal cutouts for domestic thermal storage electric water heaters
(alternating current only)
Covers consumer adjustable thermostats (immersion and contact types) and non-self-resettable thermal cutouts either as separate
or combined units. Specifies design and construction, dimensions, temperature settings, operational requirements, marking and
performance, and testing.
Approved electrical safety Standard
$56.80+GST (Members), $71.00+GST (Retail), 24 pages
NZS 6214:1988
NZS 6216:1989
NZS 6217:1989
NZS 6218:1989
NZS 6219:1989
NZS 6221.1:1972
NZS 6221.2:1972
NZS 6232:1996
NZS 6300:1996
(Withdrawn)
NZS 6301:1973
NZS 6302:1992
NZS 6303:1992
NZS 6306.2:1992
NZS 6307:1991
ISO 6308:1980
NZS 6311:1993
NZS 6315:1998
NZS 6317:1988
NZS/ISO 6318:1985
(Withdrawn)
NZS 6323:1995
NZS 6327:1992
NZS 6328:1992
NZS 6329:1990
NZS 6331:1972
NZS 6332:1992
NZS 6335:1990
BS 6346:1987
(Withdrawn)
NZS/ISO 6346:1984
(Withdrawn)
NZS 6353:1992
NZS 6361:1972
AS/NZS 6400:2005
Enables consumers to clearly identify and purchase water efficient products with the full confidence that the performance of these
products has not been compromised due to their reduced water usage. It is also intended to encourage manufacturers to develop
and market products that are more water efficient.
Reprinted to incorporate Amendments 1 to 5
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 64 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 4, 2010 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 5, 2011 $33.60+GST (Members), $42.00+GST (Retail)
NZS 6401:2003
NZS 6402:1973
(Withdrawn)
NZS 6403:1980
(Withdrawn)
ISO 6474:1981
(Withdrawn)
Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of
rated voltages up to and including 33 000 V
Specifies construction, dimensions and test requirements for mass-impregnated non-draining paper insulated cables with lead or
lead alloy sheaths for operation up to and including 33 000 V between phases. Provision is made for armour and protective clothing.
$312.00+GST (Members), $390.00+GST (Retail), 52 pages
BS 6480:1988
Units of measurement
NZS 6501:1982
Provides lists of the agreed international symbols and names for the coherent units of the International System of Units known as SI.
The tables in the various sections show the one and only SI unit for each of about 500 physical quantities. Physical quantities are
defined or identified with varying degrees of completeness. Symbols are recommended for each physical quantity with suggested
alternatives in many cases. Recommendations are given for the printing of letters and numbers and of symbols for mathematical
operations. A guide is given for the use of the terms coefficient, factor, parameter, number, ratio and constant. Identical to ISO
Standards Handbook 2:1982.
Adopted Standard
$73.60+GST (Members), $92.00+GST (Retail), 258 pages
Amendment 1, 1983 $33.60+GST (Members), $42.00+GST (Retail)
NZS 6502:1972
(Withdrawn)
Specification for measuring instruments for constructional works - Metric graduation and
figuring of instruments for linear measurement
Form of graduation and figuring, in metric units, of rules, lathes, squares, etc., and of steel pocket rules, tapes and bands, tapes in
synthetic material, and land chains and levelling staffs. Some instruments are illustrated. Identical to BS 4484:Part 1:1969 with
modifications for New Zealand.
Adopted Standard
$156.00+GST (Members), $195.00+GST (Retail), 12 pages
Amendment A, 1975 $33.60+GST (Members), $42.00+GST (Retail)
Amendment B, 1979 $33.60+GST (Members), $42.00+GST (Retail)
NZS 6504.1:1975
NZS 6505:1976
NZS 6506:1982
NZS 6507.1:1986
(Withdrawn)
NZS 6507.2:1986
(Withdrawn)
Protective clothing - Protection against liquid chemicals - Test method for resistance of
materials to penetration by liquids
Describes a laboratory test method for the measurement of penetration resistance of protective clothing materials from the impact
and runoff of liquids. Identical to and reproduced from ISO 6530:2005.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
NZS/BS 6539:1984
(Withdrawn)
Petroleum liquids and gases. Fidelity and security of dynamic measurement. Cabled
transmission of electric and/or electronic pulsed data
Establishes guidelines for ensuring the fidelity and security of pulsed data cabled transmission systems utilized for the metering of
fluids, ensuring the integrity of the primary indication. Criteria and recommendations for design, installation, use and maintenance of
the relevant equipment. Regulatory requirements, including those for safety, are not specifically covered in detail but notes on safety
are included for guidance.
Adopted Standard
$105.71+GST (Members), $132.14+GST (Retail), 12 pages
NZS/ISO 6551:1982
NZS/ISO 6592:1985
(Withdrawn)
NZMP 6600:1991
(Withdrawn)
NZS 6601:1980
NZS 6605:1988
Compatibility of television broadcast receivers with broadcast signals
Describes the technical characteristics of the television signals broadcast in New Zealand, the carrier frequencies allocated to this
service, and other parameters relating to the performance of receivers and receiving antennae. Specifies certain design
characteristics of receivers and receiving antennae that are necessary or desirable for satisfactory reception in the presence levels of
interference considered likely to occur in New Zealand.
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
Broadcast teletext
NZS 6606:1988
Defines the teletext broadcasting system used in New Zealand. Describes: (a) the formation of binary code groups into data-lines for
inclusion in the television field-blanking interval; (b) how the control and address information carried on each data-line, together with
the special page-header data-lines and the sequence of transmission of the data-lines, allows the data-lines corresponding to the
rows of a selected page to be identified; and (c) the method by which the character codes received on the data-lines corresponding
to the rows of the selected page are interpreted to give the page display. Additional requirements are given for the transmission of
closed caption data by teletext, and an appendix gives details of an enhanced teletext system which may eventually be introduced in
New Zealand.
$68.80+GST (Members), $86.00+GST (Retail), 32 pages
NZS 6608:1990
(Withdrawn)
NZS 6609.1:1990
NZS 6623.1:1993
(Withdrawn)
NZS 6623.2:1993
(Withdrawn)
NZS 6623.3:1993
(Withdrawn)
NZS 6651:1973
NZMP 6652:1978
(Withdrawn)
NZS 6661:1989
NZS 6701:1983
NZS 6705.1:1986
NZS 6708.1:1989
(Withdrawn)
NZS 6708.2:1989
(Withdrawn)
NZS 6742:1971
from simple and detailed assessment methods. These expand the methods used in the 1999 edition. Guidelines for setting noise
limits and writing consent conditions have been revised, and guidelines for protection of health and amenity expanded to address
common planning issues.
$113.60+GST (Members), $142.00+GST (Retail), 53 pages
Acoustics - Construction noise
NZS 6803:1999
Covers the measurement and prediction of noise from construction, maintenance and demolition work, and the assessment of such
noise to determine whether action is required to control it. Intended to assist local authorities, developers, architects, engineers,
planners, designers, and contractors to control noise on and from construction, maintenance and demolition sites. Includes detailed
methodology for predicting noise from construction activities, and sound level data tables for a wide range of construction equipment.
$108.80+GST (Members), $136.00+GST (Retail), 68 pages
Airport noise management and land use planning
NZS 6805:1992
For use by territorial or regional government to control airport noise. Establishes maximum acceptable levels on noise for the
protection of community health.
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
Acoustics - Road-traffic noise - New and altered roads
NZS 6806:2010
Sets out procedures and requirements for the prediction, measurement, and assessment of road traffic noise for new and
substantially altered state highways and local roads. The Standard is intended to be used primarily by local authorities and road
controlling authorities and seeks to promote quicker and consistent decision-making nationally regarding the management of road
traffic noise. It also provides best practice guidance and advice on methods for mitigating reverse sensitivity situations and the
environmental effects of noise exposure on nearby noise-sensitive activities. For the purpose of this Standard, where any project
includes a mixture of new and upgraded existing roads the roading authority shall determine the relevant criteria to be applied to
each section of the road for traffic noise mitigation.
$210.40+GST (Members), $263.00+GST (Retail), 136 pages
Noise management and land use planning for helicopter landing areas
NZS 6807:1994
Details procedures for the measurement and assessment of noise from helicopter landing areas and recommends land use planning
measures where necessary to mitigate the adverse effects of noise on land uses surrounding the helicopter landing area.
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
Acoustics - Wind farm noise
NZS 6808:2010
Provides suitable methods for the prediction, measurement, and assessment of sound from wind turbines. These methods may be
applied during the processes of planning and developing a wind farm, then for confirming compliance with resource consent
conditions covering sound levels, and also for the investigation and assessment of noise complaints about operating wind farms.
$85.60+GST (Members), $107.00+GST (Retail), 48 pages
Acoustics - Port noise management and land use planning
NZS 6809:1999
For use by territorial or regional government to control port noise. Establishes maximum acceptable levels on noise for the protection
of community health.
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
Limits and measurement methods of electromagnetic noise from high voltage a.c. power
systems, 0.15 - 1000 MHz
Establishes limits for electromagnetic interference (radio disturbance) from alternating current (a.c.) overhead power lines and high
voltage equipment installations in the frequency range 0.15 to 1000 MHz. These limits are specified for the protection of broadcast
radio reception and other radio communication services, including navigation and safety-of-life services.
$68.80+GST (Members), $86.00+GST (Retail), 15 pages
NZS 6869:2004
NZS/BS 6920.1:1990
(Withdrawn)
NZS/BS 6920.2.2.1:1990
(Withdrawn)
NZS/BS 6920.2.2.2.1:1990
(Withdrawn)
NZS/BS 6920.2.2.2.2:1990
(Withdrawn)
NZS/BS 6920.2.2.2.3:1990
(Withdrawn)
NZS/BS 6920.2.2.3:1990
(Withdrawn)
NZS/BS 6920.2.2.4:1988
(Withdrawn)
NZS/BS 6920.2.2.5:1990
(Withdrawn)
NZS/BS 6920.2.2.6:1990
(Withdrawn)
NZS/BS 6920.3:1990
(Withdrawn)
Specification for mastic asphalt for building and civil engineering (limestone aggregate)
NZS/BS 6925:1988
Specifies requirements for roofing, tanking and flooring grades of mastic asphalt for building and civil engineering purposes,
composed of ground limestone, coarse aggregate and pigment if required, incorporated with asphaltic cements.
Adopted Standard
$96.00+GST (Members), $120.00+GST (Retail), 12 pages
Amendment 1, 1992 $33.60+GST (Members), $42.00+GST (Retail)
Overhead line design - Detailed procedures
AS/NZS 7000:2010
Provides electricity industry network owners, overhead line maintenance service providers, design consultants, construction
contractors, structure designers, and pole manufacturers with an industry standard that replaces all previously used reference
guidelines.
Joint Australian/New Zealand Standard
$263.20+GST (Members), $329.00+GST (Retail), 304 pages
NZS 7101:1981
(Withdrawn)
(Withdrawn)
NZS 7202.2:1986
(Withdrawn)
NZS 7203:1992
NZS 7204:1990
(Withdrawn)
NZS/ISO 7243:1989
(Withdrawn)
NZS 7401:1985
NZS 7402:1992
NZS 7403:1992
NZS 7404.1:1992
NZS 7404.2:1992
NZS 7404.3:1992
NZS 7404.4:1992
NZS 7421:1990
NZS/ISO 7434:1983
(Withdrawn)
NZS/ISO 7435:1983
(Withdrawn)
NZS/ISO 7436:1983
(Withdrawn)
AS/NZS 7450.1:1999
Data communication - Arrangements for DTE to DTE physical connection V.24 and X.24
interchange circuits
Describes various arrangements for the interconnection of Data Terminal Equipment (DTE) without intermediate Data Circuitterminating Equipment (DCE), in terms of electrical, mechanical and functional characteristics. Applies to DTEs with interface circuits
standardized in CCITT Recommendation V.24 for data transmission over telephone networks or with interface circuits standardized
in CCITT Recommendation X.24 for transmission over public data networks. Identical to AS 3510-1987 and ISO TR7477:1985.
Adopted Standard
$43.53+GST (Members), $54.41+GST (Retail), 8 pages
NZS/ISO TR7477:1985
(Withdrawn)
Information processing systems - Open Systems Interconnection - Basic reference model Naming and addressing
Defines general mechanisms for the use of names and addresses to identify and locate objects in the OSI environment and defines
the use of these mechanisms within the layered structure of the Basic Reference Model. Identical to AS 2777.3-1990 and ISO
7498:1988.
Adopted Standard
$100.15+GST (Members), $125.19+GST (Retail), 21 pages
NZS/ISO 7498.3:1988
NZS/ISO 7498.4:1988
(Withdrawn)
(Withdrawn)
NZS/ISO 7531:1987
(Withdrawn)
(Withdrawn)
NZS 7607.1:1984
NZS 7607.2:1984
(Withdrawn)
NZS 7609.2:1990
(Withdrawn)
Blue polyethylene pipes up to nominal size 63 for below ground use for potable water
NZS 7610:1991
Specifies requirements for small sizes of pipe in metric series diameters coloured blue for carrying potable water, especially
underground or in ducts with other services. Suitable for water authority use in respect of requirements for protecting water quality.
Identical to BS 6572:1985 with modifications for New Zealand.
Adopted Standard
$192.00+GST (Members), $240.00+GST (Retail), 16 pages
Amendment 1, 1987 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 1987 $33.60+GST (Members), $42.00+GST (Retail)
Amendment A, 1991 $33.60+GST (Members), $42.00+GST (Retail)
NZS 7641:1978
(Withdrawn)
NZS 7648:1987
NZS 7649:1988
NZS 7650:1975
(Withdrawn)
(Withdrawn)
Plastics piping systems for soil and waste discharge (low and high temperature) inside
buildings - Polypropylene (PP)
Specifies the requirements for solid-wall polypropylene (PP) pipes and fittings for soil and waste discharge inside buildings, as well
as the system itself. It does not include buried pipework. It is applicable to pipes and fittings for jointing by means of elastomeric
sealing rings or by butt fusion. Minor variations to the ISO Standard have been included in this document, which relate to normative
references (some EN test methods have been replaced by current ISO or AS/NZS Standards) and marking requirements and do not
change its technical content. These modifications and variations are listed in Appendix ZZ.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 36 pages
AS/NZS 7671:2010
NZS 7701:1973
(Withdrawn)
NZS 7702:1989
(Withdrawn)
NZS 7703:1985
NZS/ISO 7776:1986
(Withdrawn)
AS/NZS 7799.2:2003
NZS/ISO 7809:1984
NZS 7841:1972
(Withdrawn)
NZS 7842:1973
(Withdrawn)
Electricity and gas industries - Safety management systems for public safety
NZS 7901:2008
Provides guidance to owners and operators of electricity generation, transmission, or distribution network assets, or gas distribution
assets, who are required by statute to have a Safety Management System (SMS).
$102.40+GST (Members), $128.00+GST (Retail), 47 pages
Information processing systems - Computer graphics - Graphical Kernel System (GKS)
functional description
Specifies a set of functions for computer graphics programming, the Graphical Kernel System (GKS). GKS is a basic graphics
system for applications that produce computer generated two-dimensional pictures on line graphics or raster graphics output
devices. It supports operator input and interaction by supplying basic functions for graphical input and picture segmentation and
allows storage and dynamic modification of pictures. The application program is allowed to adapt its behaviour at a workstation to
make best use of workstation capabilities. This Standard includes functions for storage on and retrieval from an external graphics
file, the functions being organized in upward compatible levels with increasing capabilities. Identical to AS 2880-1986 and ISO
7942:1985.
Adopted Standard
$340.00+GST (Members), $425.00+GST (Retail), 245 pages
NZS/ISO 7942:1985
Screening, risk assessment and intervention for family violence including child abuse and
neglect
Establishes the minimum requirements that should be met by individuals and agencies/services involved in working with families
living with family violence, child abuse or neglect. It provides a common language for these agencies/services to screen for this
behaviour, assess risk relating to these situations and provide for safety planning interventions.
$39.20+GST (Members), $49.00+GST (Retail), 94 pages
NZS 8006:2006
(Withdrawn)
NZS/ISO 8073:1988
from herd testing. The 2007 edition supports the Amendments made to the Herd Testing Regulations to allow samples to be taken
once a day. Relaxations to allow part herd testing have also been incorporated.
$125.60+GST (Members), $157.00+GST (Retail), 78 pages
NZS 8100.1:2002
NZS 8100.2:2002
Safety of toys - Part 1: Safety aspects related to mechanical and physical properties
AS/NZS ISO 8124.1:2010
Specifies acceptable criteria for structural characteristics of toys, such as shape, size, contour, spacing (e.g. rattles, small parts,
sharp points and edges, and hinge-line clearances) as well as acceptable criteria for properties peculiar to certain categories of toy
(e.g. maximum kinetic energy values for non-resilient-tipped projectiles and minimum tip angles for certain ride-on toys).
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$188.00+GST (Members), $235.00+GST (Retail), 116 pages
Amendment 1, 2011 $28.80+GST (Members), $36.00+GST (Retail)
AS/NZS ISO 8124.1:2010 RUL ST.1 Rulings to safety of toys Standards - Ruling 1: Small parts
Ruling applies to Clauses 4.4.2 and 5.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 2 pages
Safety of toys - Flammability
AS/NZS ISO 8124.2:2009
Specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain
toys when they are subjected to a minor source of ignition. The test methods described in Clause 5 are used for the purposes of
determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be
considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of
ignition.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 24 pages
Safety of toys - Part 3: Migration of certain elements
AS/NZS ISO 8124.3:2012
Specifies maximum acceptable levels, and methods of sampling and extraction prior to analysis, for the migration of antimony,
arsenic, barium, cadmium, chromium, lead, mercury and selenium from toy materials, and from parts of toys. Adopted with national
modifications from ISO 8124-3:2010.
Joint Australian/New Zealand Standard
$90.40+GST (Members), $113.00+GST (Retail), 32 pages
Safety of toys - Part 6: Swings, slides and similar activity toys for indoor and outdoor
family domestic use
Provides requirements to minimise the risk from certain specific hazards associated with the referenced products when used in a
domestic environment. Identical with and reproduced from ISO 8124-4:2010.
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 64 pages
AS/NZS ISO 8124.6:2011
(Withdrawn)
Health and disability services Standards - Health and disability services (general) Standard
NZS 8134.0:2008
NZS 8134:2008 Health and disability services Standards is mandatory for those health and disability service providers that are
subject to the Health and Disability Services (Safety) Act 2001. This Standard is also mandatory for relevant service-based contracts
that receive health funding. Where this Standard is not a requirement, its application will promote good and safe practice by
providers for consumers. NZS 8134.0:2008 Health and disability services (general) Standard contains general and reference
information for the NZS 8134:2008 Health and disability services Standards, including definitions and the audit framework. It should
be read in conjunction with Parts 1, 2, and 3. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for use in a binder. Each part can
also be purchased separately.
To be read in conjunction with Parts 1, 2, and 3. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for use in a binder. Each part
can also be purchased separately
$28.80+GST (Members), $36.00+GST (Retail), 42 pages
Health and disability services Standards - Health and disability services (core) Standards
NZS 8134.1:2008
This Standard is to be read in conjunction with NZS 8134.0:2008 Health and disability services (general) Standard which contains
the definitions and audit framework information applicable across the health and disability suite. Part 1 is the result of the revision of
NZS 8134:2001 Health and Disability Sector Standards and incorporates the requirements from NZS 8143:2001 National Mental
Health Sector Standard. NZS 8134:2008 is applicable to a wide range of health and disability services and includes Standards on
consumer rights, organisational management, continuum of service delivery, and safe and appropriate environment. NZS 8134 Parts
0 to 3 are sold as a loose-leaf set, for use in a binder. Each part can also be purchased separately.
To be read in conjunction with NZS 8134.0:2008 Health and disability services (general) Standard which contains the definitions and
audit framework information applicable across the health and disability suite. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for
use in a binder. Each part can also be purchased separately
$68.80+GST (Members), $86.00+GST (Retail), 97 pages
Health and disability services Standards - Health and disability services (restraint
minimisation and safe practice) Standards
This Standard is to be read in conjunction with NZS 8134.0:2008 Health and disability services (general) Standard which contains
the definitions and audit framework information applicable across the health and disability suite. NZS 8134.2:2008 is the result of the
first revision of NZS 8141:2001 Restraint minimization and safe practice. It aims to reduce the use of restraint in all its forms and to
encourage the use of least restrictive practices. It provides guidance on restraint minimisation, safe restraint practice, and seclusion.
All services must meet NZS 8134.2.1. NZS 8134.2.2 and NZS 8134.2.3 will be assessed as being not applicable to a service where
restraint and seclusion are not used. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for use in a binder. Each part can also be
purchased separately.
To be read in conjunction with NZS 8134.0:2008 Health and disability services (general) Standard which contains the definitions and
audit framework information applicable across the health and disability suite. NZS 8134 Parts 0 to 3 are sold as a loose-leaf set, for
use in a binder. Each part can also be purchased separately
NZS 8134.2:2008
NZS 8134.3:2008
Best Practice Guidance for Community Services for People with Dementia and Proposed
Audit Workbook
Can be applied voluntarily by organisations and support workers in home-care and day programme settings to assist people
diagnosed with dementia, their families and representatives. Provides guidance material (Guidance Parts 1 - 4) and sector solution
examples in the proposed audit workbook that define what will become current accepted good practice for dementia care in homecare and day programme settings in the community. The focus is on the unique needs of people with dementia, their families and
representatives, and the role of support workers in the community. The aim is to promote quality care in the community, and delay or
prevent unnecessary moves into residential care. The overarching principles, guidance material and sector solutions specify the
dementia community service outcomes that are additional to those required by NZS 8158 Home and community support sector
standard and SNZ HB 8158 Home and community support sector standard audit workbook. As this document does not reiterate or
duplicate any aspect of the SNZ HB 8158 sector solutions, it will need to be used alongside SNZ HB 8158.
$51.20+GST (Members), $64.00+GST (Retail), 135 pages
SNZ HB 8134.6:2006
individual as well as national level. It is expected that the information generated via these indicators will culminate at a national level,
and ultimately lead to continuous improvement of residential aged-care and dementia-care services.
$56.80+GST (Members), $71.00+GST (Retail), 64 pages
Day-stay surgery and procedures
NZS 8164:2005
Developed for organisations providing day-stay and rooms or office-based surgery or procedures and while not mandatory,
implementation will assist providers in meeting the requirements of legislation, funders and certification frameworks.
$46.40+GST (Members), $58.00+GST (Retail), 32 pages
Rooms/Office-based surgery and procedures
NZS 8165:2005
Provides an agreed definition of what constitutes rooms/office-based surgery or procedures and promotes improved safety for
patients by specifying consistent dimensions of safety in terms of patient-focused services, facility management, pre-entry and entry
to services, service delivery, and facilities.
$46.40+GST (Members), $58.00+GST (Retail), 32 pages
Health Network Code of Practice
SNZ HB 8169:2002
The purpose of the Health Network Code of Practice is to describe how healthcare organizations can safely exchange electronic
health information (EHI) over a secure network intended for this purpose.
Reprinted to incorporate Amendment 1:2006
$46.40+GST (Members), $58.00+GST (Retail), 36 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Primary Healthcare Practice Management Systems: Publicly Available Specification
SNZ PAS 8170:2005
The specifications in this document define the functionality expected of the Primary Healthcare Practice Management Systems
(PHCPMS) which when implemented will assist practices to meet current and future PHCPMS requirements. The specifications are
voluntary for the PHCPMS vendor to implement and are guidelines for purchasers of practice management systems. They also
provide a framework for change that will apply to IT changes, no matter where the request originated.
$46.40+GST (Members), $58.00+GST (Retail), 48 pages
Allied health services sector Standard
NZS 8171:2005
Specifies consistent dimensions of safety for allied health service providers in terms of consumer focused services, organizational
management, pre-entry to services, service delivery, managing service delivery and provision of a safe and appropriate environment.
$46.40+GST (Members), $58.00+GST (Retail), 48 pages
Allied health services sector Standard - Physiotherapy Services Audit Workbook
SNZ HB 8171.1:2005
Designed to set out the sector solutions, examples and additional information that will enable physiotherapy practices, in both public
and private health and disability settings, to demonstrate compliance with the Allied Health Services Sector Standard NZS 8171:
2005, while meeting the special and unique needs of New Zealanders seeking physiotherapy services.
$56.80+GST (Members), $71.00+GST (Retail), 180 pages
Allied health services sector Standard - Physiotherapy Services Audit
SNZ HB 8171.1:2005 CD-ROM Version
Workbook, Electronic Tool Version
Allows both the Practice and the Auditor to complete the audit workbook by using a series of drop down menus to demonstrate
compliance with and audit against Allied Health Services Sector Standard NZS 8171:2005. Included in the tool kit are the user guide,
electronic template and installation instructions. Not available to view online but can be delivered either via a CD Rom or e-mail.
$108.80+GST (Members), $136.00+GST (Retail)
Allied health services sector Standard - Chiropractic Services Audit Workbook
SNZ HB 8171.2:2005
Applies to Chiropractors working in private practice as a primary contact health care provider. It has been designed to set out sector
solutions, examples and additional information that will enable chiropractic offices, clinics and institutions to demonstrate compliance
with the Allied Health Services Sector Standard NZS 8171: 2005 while meeting the special and unique needs of New Zealanders
seeking chiropractic services.
$56.80+GST (Members), $71.00+GST (Retail), 159 pages
Allied health services sector Standard - Chiropractic Services Audit
SNZ HB 8171.2:2005 CD-ROM Version
Workbook, Electronic Tool Version
Allows both the Practice and the Auditor to complete the audit workbook by using a series of drop down menus to demonstrate
compliance with and audit against Allied Health Services Sector Standard NZS 8171:2005. Included in the tool kit are the user guide,
electronic template and installation instructions. Not available to view online but can be delivered either via a CD Rom or e-mail.
$108.80+GST (Members), $136.00+GST (Retail)
Fertility Services
NZS 8181:2007
Achieves the requirements of the Human Assisted Reproductive Technology (HART) Act 2004, and builds on the existing cooperation among specialists and health practitioners in the developing area of fertility services provision. Along with the associated
audit workbook, it defines the quality and safety requirements for the provision of fertility services in New Zealand.
$51.20+GST (Members), $64.00+GST (Retail), 88 pages
Fertility Services Audit Workbook
SNZ HB 8181:2007
Achieves the requirements of the Human Assisted Reproductive Technology (HART) Act 2004, and builds on the existing cooperation among specialists and health practitioners in the developing area of fertility services provision. This Audit workbook
establishes the degree of attainment against NZS 8181 Fertility Services Standard. It identifies areas of compliance, and/or areas
requiring improvement in order to reduce the risk of serious failure impacting on service delivery.
$68.80+GST (Members), $86.00+GST (Retail), 188 pages
A guide to abbreviations in Standards work
NZMP 8201:1993
Provides a list of abbreviations of Standards organizations and standard designations for use in Standards work.
$39.20+GST (Members), $49.00+GST (Retail), 38 pages
NZS/ISO 8208:1987
(Withdrawn)
NZS/ISO 8327:1987
(Withdrawn)
Establishes the hygienic and quality requirements for the handling, processing and distribution of fin fish intended for human
consumption, either directly or after further processing. Recommended cleaning and sanitizing procedures, water quality standards
and a name list of fish species are appended.
$51.20+GST (Members), $64.00+GST (Retail), 35 pages
AS/NZS ISO 8402:1994
Code of practice for the handling, processing, storage and distribution of molluscan
shellfish
Establishes hygienic and quality requirements for the handling, processing, storage and distribution of molluscs intended for human
consumption, either directly or after further processing. Recommended cleaning and sanitizing procedures and bacteriological water
quality are appended.
$39.20+GST (Members), $49.00+GST (Retail), 14 pages
NZS 8405:1975
Code of practice for the handling, processing, storage and distribution of fresh and frozen
rock lobsters and frozen rock lobster tails
Establishes requirements for the handling, processing, storage and distribution of live lobsters, cooked whole lobsters, frozen cooked
whole lobsters and frozen lobster tails. Recommended cleaning and sanitizing procedures and bacteriological water quality are
appended.
$51.20+GST (Members), $64.00+GST (Retail), 20 pages
NZS 8406:1975
NZS 8407:1985
(Withdrawn)
Management of agrichemicals
NZS 8409:2004
Provides practical and specific guidance on the safe, responsible and effective management of agrichemicals, including plant
protection products (herbicides, insecticides, fungicides), veterinary medicines, fumigants used in rural situations and agricultural use
of detergents and sanitizers. The main changes are due to the application of the Hazardous Substances and New Organisms
(HSNO) Regulations. New information on emergency preparedness and sale of agrichemicals has been added and the section on
product data moved to an Appendix.
Approved Trainers can purchase a pack of 15 copies at $69.95 per copy
$167.20+GST (Members), $209.00+GST (Retail), 195 pages
Organic production
NZS 8410:2003
Sets out the minimum requirements for the production, handling, processing and labelling of organic products including plants and
plant products, and animals and animal products.
$68.80+GST (Members), $86.00+GST (Retail), 84 pages
Grades for vegetables at the first point of sale
NZS 8441:1993
Establishes minimum requirements for vegetables at the first point of sale. Requirements are given in separate chapters for each
type of vegetable. 1993 edition of NZS 8441:1972 incorporating Amendments No. 1 and No.2.
$39.20+GST (Members), $49.00+GST (Retail), 54 pages
NZS/ISO 8471:1987
(Withdrawn)
NZS/ISO 8481:1986
(Withdrawn)
NZS/ISO 8482:1987
(Withdrawn)
Safety barriers and fences around swimming pools, spas and hot tubs
NZS 8500:2006
Assists people to avoid a swimming pool related drowning by presenting various options designed to deny, delay, or detect
unsupervised entry to the swimming pool area. Options for the location of effective safety barriers that will restrict the access of
young children to swimming pools are provided, and requirements for the design, construction and performance of fences, gates,
retaining walls and door sets intended to form a barrier to restrict access of young children to swimming pools are specified. This
Standard is intended to become a compliance document under the Building Code for new pools and to be used by territorial
authorities in developing safe solutions for existing pools.
$96.80+GST (Members), $121.00+GST (Retail), 44 pages
NZS/ISO TR8509:1987
(Withdrawn)
NZS 8541:1971
(Withdrawn)
NZS 8602:1989
NZS/ISO 8602:1987
(Withdrawn)
(Withdrawn)
NZS/ISO 8613.2:1989
(Withdrawn)
NZS/ISO 8613.4:1989
(Withdrawn)
NZS/ISO 8613.5:1989
(Withdrawn)
NZS/ISO 8613.6:1989
(Withdrawn)
NZS/ISO 8613.7:1989
(Withdrawn)
NZS/ISO 8613.8:1989
(Withdrawn)
(Withdrawn)
Computer graphics - Metafiles for the storage and transfer of picture description
information - Functional specifications
Specifies functional requirements for computer graphics metafile which provides a file format suitable for the storage and retrieval of
picture information. The file format consists of a set of elements that can be used to describe pictures in a way that is compatible
between systems of different architecture and devices of differing capabilities and design. Identical to AS 3603.1-1988 and ISO
8632.1:1987.
Adopted Standard
$194.45+GST (Members), $243.06+GST (Retail), 144 pages
NZS/ISO 8632.1:1987
Computer graphics - Metafiles for the storage and transfer of picture description
information - Character encoding
Specifies requirements for character encoding computer graphics metafile which provides a file format suitable for the storage and
retrieval of picture information. The file format consists of a set of elements that can be used to describe pictures in a way that is
compatible between systems of different architecture and devices of differing capabilities and design. Identical to AS 3603.2-1988
and ISO 8632.2:1987.
Adopted Standard
$135.70+GST (Members), $169.63+GST (Retail), 60 pages
NZS/ISO 8632.2:1987
Computer graphics - Metafiles for the storage and transfer of picture description
information - Binary encoding
Specifies requirements for binary encoding for computer graphics metafile which provides a file format suitable for the storage and
retrieval of picture information. The file format consists of a set of elements that can be used to describe pictures in a way that is
compatible between systems of different architecture and devices of different capabilities and design. Identical to AS 3603.3-1988
and ISO 8632.3:1987.
Adopted Standard
$113.96+GST (Members), $142.45+GST (Retail), 50 pages
NZS/ISO 8632.3:1987
NZS/ISO 8632.4:1987
Computer graphics - Metafiles for the storage and transfer of picture description
information - Clear text encoding
This part specifies requirements for clear text encoding for computer graphics metafile which provides a file format suitable for
storage and retrieval of picture information. The file format consists of a set of elements that can be used to describe pictures in a
way that is compatible between systems of different architecture and devices of differing capabilities and design. Identical to AS
3603.4-1988 and ISO 8632.4:1987.
Adopted Standard
$100.15+GST (Members), $125.19+GST (Retail), 33 pages
NZS/ISO 8648:1988
(Withdrawn)
NZS/ISO 8649:1988
(Withdrawn)
NZS/ISO 8650:1988
(Withdrawn)
(Superseded by HB 246:2010)
NZS 8690:2003
NZS 8701:1971
(Withdrawn)
NZS 8702:1978
(Withdrawn)
NZS 8703:1977
(Withdrawn)
NZS 8709.2:1985
NZS 8710:1984
NZS 8711:1986
(Withdrawn)
(Withdrawn)
NZS 8721:1988
NZS 8722:1988
NZS 8771:1973
(Withdrawn)
NZS 8772:1973
(Withdrawn)
NZS 8773:1973
(Withdrawn)
NZS 8774:1973
(Withdrawn)
NZS 8775:1974
(Withdrawn)
NZS 8776:1973
(Withdrawn)
NZS 8777:1973
NZS/ISO-IEC 8802.3:1990
NZS/ISO 8805:1988
(Withdrawn)
NZS/ISO 8821:1989
(Withdrawn)
NZS/ISO 8822:1988
(Withdrawn)
NZS/ISO 8823:1988
(Withdrawn)
NZS/ISO-IEC 8824:1990
AS/NZS 8824.4:1998
AS/NZS 8825.1:1998
NZS/ISO 8832:1989
NZS/ISO 8877:1987
NZS/ISO 8878:1987
Information processing - Text and office systems - Standard Generalized Markup Language
(SGML)
Specifies the following: (a) an abstract syntax known as the Standard Generalized Markup Language (SGML). The language
expresses the description of a document`s structure and other attributes, as well as other information that makes the markup
interpretable; (b) a reference concrete syntax that binds the abstract syntax to specific characters and numerical values, and criteria
for defining variant concrete syntaxes, and (c) conforming documents in terms of their use of components of the language and
systems in terms of their ability to process conforming documents and to recognize markup errors in them. The Standard also
specifies how data such as images, graphics, or formatted text (not defined by the Standard) can be included in a conforming
document. Identical to AS 3514-1987 and ISO 8879:1986.
Adopted Standard
$194.45+GST (Members), $243.06+GST (Retail), 155 pages
NZS/ISO 8879:1986
NZS/ISO 8885:1987
Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for singlevision and multifocal lenses
Specifies requirements for the optical and geometrical properties for uncut finished single-vision and multifocal spectacle lenses.
Identical to and reproduced from ISO 8980.1:2004(E) with Corrigendum 1:2006.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 20 pages
AS/NZS ISO 8980.1:2011
Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive
power lenses
Specifies requirements for the optical and geometrical properties for uncut finished progressive spectacle lenses. Identical to and
reproduced from ISO 8980.2:2004(E) with Corrigendum 1:2006.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 20 pages
Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test
methods for anti-reflective coatings
Specifies optical and non optical requirements and test methods for anti-reflective coatings on spectacle lenses. This part does not
deal with transmittance and absorptance, or the colour of the reflected light. Identical to and reproduced from ISO 8980.4:2000(E).
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 12 pages
AS/NZS ISO 8980.4:2011
Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum requirements for
spectacle lens surfaces claimed to be abrasion-resistant
Specifies the requirement and test method for spectacle lens surfaces that are claimed to provide a basic level of abrasion
resistance including those with coatings. A lens claimed to be abrasion-resistant shall meet the requirements on both front and back
surfaces. Identical to and reproduced from ISO 8980.5:2005(E).
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 16 pages
AS/NZS ISO 8980.5:2011
Quality management and quality assurance standards - Generic guidelines for the
application of ISO 9001, ISO 9002 and ISO 9003
Provides guidelines to assist users in understanding and applying the requirements of AS/NZS ISO 9001, 9002 and 9003 and to
improve consistency in their interpretation and application. This Standard is technically equivalent to and has been reproduced from
ISO 9000-2:1997. Includes an Australian/New Zealand appendix which provides additional guidance in the form of a series of
questions which address the requirements of ISO 9001.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 64 pages
AS/NZS ISO 9000.2:1998
AS/NZS 9000.3(Int):1998
NZS 9000.4:1994
(Withdrawn)
NZS 9004.2:1992
Quality management and quality system elements - Guidelines for processed materials
NZS 9004.3:1994
Provides a basic guide to quality system elements applicable to processed materials, such as bulk products, and discusses means of
ensuring effective quality management. This standard is identical to ISO 9004.3:1993.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 21 pages
Quality management and quality system elements - Guidelines for quality improvement
NZS 9004.4:1994
Provides a set of management guidelines for implementing continuous quality improvement within an organization. Describes tools
and techniques for a quality improvement methodology based on data collection and analysis. This standard is identical to ISO
9004.4:1993.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 31 pages
AS/NZS 9004.5:1998
NZS/ISO 9067:1987
(Withdrawn)
NZS/ISO-IEC 9072.1:1989
(Withdrawn)
NZS/ISO-IEC 9072.2:1989
(Withdrawn)
NZS/ISO-IEC 9075:1989
Provides information that enables software product quality to be specified and evaluated from different perspectives by those
associated with acquisition, requirements, development, use, evaluation, support, maintenance, quality assurance and audit of
software. Identical to and reproduced from ISO/IEC 9126-1:2001.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 36 pages
Software engineering - Product quality - External metrics
AS/NZS ISO/IEC 9126.2:2005
Users of this Technical Report can select or modify and apply metrics and measures from this Technical Report or may define
application-specific metrics for their individual application domain. Identical to and reproduced from ISO/IEC TR 9126-2:2003.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 100 pages
Software engineering - Product quality - Internal metrics
AS/NZS ISO/IEC 9126.3:2005
Provides internal metrics for quantitatively measuring external software quality in terms of characteristics and sub-characteristics
defined in AS/NZS ISO/IEC 9126.1. It is intended to be used together with AS/NZS ISO/IEC 9126.1. Identical to and reproduced
from ISO/IEC TR 9126-3:2003.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 76 pages
Software engineering - Product quality - Quality in use metrics
AS/NZS ISO/IEC 9126.4:2005
Provides and defines quality in use metrics for the characteristics defined in AS/NZS ISO/IEC 9126.1. It is intended to be used
together with AS/NZS ISO/IEC 9126.1. Identical to and reproduced from ISO/IEC TR 9126-4:2003.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 72 pages
NZS/ISO 9127:1988
(Withdrawn)
(Withdrawn)
Provides a model for local authorities to use as the basis of a bylaw to regulate and control water supply. NZS 9201.7 provides a
general model so that by means of specific modifications each local authority may meet its individual requirements. Small local
authorities should be able to use the document with minimal modification and without undertaking substantial investigations.
Reference should be made to NZS 9201: Part 1 and to the legislation referenced under Referenced Documents for any other
definitions not included in this Part.
$73.60+GST (Members), $92.00+GST (Retail), 35 pages
Model general bylaws - Control of advertising signs
NZS 9201.8:1999
Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$39.20+GST (Members), $49.00+GST (Retail), 12 pages
NZS 9201.9:1972
(Withdrawn)
NZS 9201.10:1972
(Withdrawn)
(Withdrawn)
NZS 9201.16:1999
(Withdrawn)
NZS 9201.17:1972
(Withdrawn)
NZS 9201.18:1972
(Withdrawn)
NZS 9201.19:1972
(Withdrawn)
NZS 9201.20:1975
(Withdrawn)
Provides a suitable model for all Territorial Authorities when dealing with trade waste discharges, which are empowered under Part 8
of the Local Government Act 2002 to make bylaws. The bylaw also includes a Guideline, which should be read in conjunction with it.
$136.80+GST (Members), $171.00+GST (Retail), 84 pages
Model general bylaws - Food safety
NZS 9201.24:1999
Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$39.20+GST (Members), $49.00+GST (Retail), 8 pages
Model general bylaws - Traffic
NZS 9201.25:2007
Sets out the requirements for parking and control of vehicular or other traffic on any road within the jurisdiction of the Council.
Reference should be made to NZS 9201: Part 1 Introductory and to the legislation referenced under Referenced Documents, for any
other definitions not included in this Part. Provides a general model so that by means of specific modifications each local authority
may meet its individual requirements. Small local authorities should be able to use the document with minimal modification and
without undertaking substantial investigations.
$46.40+GST (Members), $58.00+GST (Retail), 24 pages
Model general bylaws - On-site wastewater disposal systems
NZS 9201.27:2000
Contains provisions in the form of model bylaws for adoption with or without amendment by territorial local authorities.
$39.20+GST (Members), $49.00+GST (Retail), 9 pages
Model general bylaws - Speed
NZS 9201.28:2007
Sets speed limits on roads within the jurisdiction of the local authority, as defined in the Local Government Act 2002. Reference
should be made to NZS 9201: Part 1 Introductory and to the legislation referenced under New Zealand Legislation for any other
definitions not included in this Part. This Model Bylaw incorporates a range of existing practices from throughout the country. It has
been drafted to provide a general model so that by means of specific modifications each local authority may meet its individual
requirements. Small local authorities should be able to use the document with minimal modification and without undertaking
substantial investigations.
$46.40+GST (Members), $58.00+GST (Retail), 28 pages
Model general bylaws - Liquor control
NZS 9201.29:2007
Intended to produce greater consistency in Liquor Control Bylaws, the Standard covers such matters as specification of public
places, days and times where the Bylaw applies, the powers of the police and exemptions to the Bylaw, and should be read in
conjunction with the Local Government Act 2002, sections 147, 169 and 170.
$46.40+GST (Members), $58.00+GST (Retail), 17 pages
Model Standing Orders for Meetings of Local Authorities and Community Boards
NZS 9202:2003
Sets down standing orders for the conduct of proceedings at meetings of local authorities and community boards in the form of
model orders for adoption with or without amendment. Incorporates amendments to the Local Government Act 2002 and the Local
Government Official Information and Meetings Act 1987 as they affect the provisions of the model standing orders.
Reprinted to incorporate Amendment 1:2006
$68.80+GST (Members), $86.00+GST (Retail), 64 pages
Amendment 1, 2006 $39.20+GST (Members), $49.00+GST (Retail)
NZS 9202:2003 Pack
(Withdrawn)
NZS 9203:1979
(Withdrawn)
This Guide is to assist local authorities in the process of selecting, reviewing and implementing appropriate methods of delivering
services.
$125.60+GST (Members), $157.00+GST (Retail), 88 pages
NZS 9231:1971
(Withdrawn)
Model bylaw for precautions against fire and panic in cinemas, theatres and places of
assembly
Contains provisions in the form of a model bylaw for precautionary measures against fire and panic in buildings required to be
licensed by the Local Government Act 1974. Sets requirements for qualified persons to take charge based on the number of persons
occupying a licensed building.
Reprinted to incorporate Corrigendum 1:1994
$51.20+GST (Members), $64.00+GST (Retail), 20 pages
Amendment 1, 1994 $33.60+GST (Members), $42.00+GST (Retail)
NZS 9232:1991
NZS/ISO-IEC 9281.1:1990
(Withdrawn)
NZS/ISO 9282.1:1988
NZS/ISO 9309:1989
(Withdrawn)
NZS/ISO-IEC 9314.3:1990
(Withdrawn)
(Withdrawn)
NZS/ISO-IEC TR 9575:1990
(Withdrawn)
NZS/ISO-IEC 9592.1:1989
(Withdrawn)
NZS/ISO-IEC 9592.2:1989
(Withdrawn)
NZS/ISO-IEC 9592.3:1989
(Withdrawn)
NZS/ISO-IEC 9593.1:1990
(Withdrawn)
NZS/ISO-IEC 9593.3:1990
(Withdrawn)
NZS/ISO-IEC 9594.1:1990
NZS/ISO-IEC 9594.2:1990
NZS/ISO-IEC 9594.3:1990
NZS/ISO-IEC 9594.4:1990
NZS/ISO-IEC 9594.5:1990
NZS/ISO-IEC 9594.6:1990
NZS/ISO-IEC 9594.7:1990
NZS/ISO-IEC 9594.8:1990
NZS/ISO-IEC 9595:1991
(Withdrawn)
NZS/ISO-IEC 9596.1:1991
(Withdrawn)
NZS/ISO 9735:1988
NZS/ISO-IEC 9899:1990
(Withdrawn)
NZS/ISO-IEC 9945.1:1990
(Withdrawn)
NZS/ISO-IEC TR 10000.2:1990
SAA/SNZ TS ISO 10004:2011 Quality management - Customer satisfaction - Guidelines for monitoring and measuring
Provides guidance in defining and implementing processes to monitor and measure customer satisfaction. It is intended for use by
organisations regardless of type, size or product provided. The focus is on customers external to the organisation. This Technical
Specification is not intended for certification or contractual purposes, nor is it intended to change any rights or obligations under
applicable statutory or regulatory requirements. Identical with and reproduced from ISO/TS 10004:2010.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 40 pages
Quality management systems - Guidelines for quality plans
AS/NZS ISO 10005:2006
Provides guidelines for the development, review, acceptance and revision of quality plans. It is focused primarily on product
realization, and is not a guide to organizational quality management system planning. Identical with, and has been reproduced from,
ISO 10005:2005.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 32 pages
NZS 10011.1:1992
NZS 10011.2:1992
NZS 10011.3:1992
NZS 10012.1:1993
(Withdrawn)
NZS/ISO-IEC TR 10029:1989
(Withdrawn)
NZS/ISO-IEC 10206:1991
(Withdrawn)
Ophthalmic optics - Semi-finished spectacle lens blanks - Part 1: Specifications for singlevision and multifocal lens blanks
Specifies requirements for the optical and geometrical properties of semi-finished single-vision and multifocal spectacle lens blanks.
Note that the requirements for semi-finished progressive power lens blanks are given in AS/NZS ISO 10322-2. Identical to and
reproduced from ISO 10322.1:2006(E).
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 16 pages
Hoists for the transfer of disabled persons - Requirements and test methods
AS/NZS ISO 10535:2011
Specifies requirements and test methods only for hoists and body-support units intended for the transfer of disabled persons.
Identical to and reproduced from ISO 10535:2006.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 60 pages
Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and
occupant-restraint systems - Requirements and test methods for all systems
Provides performance requirements and test methods, instructions and labelling for wheelchair and occupant restraint systems that
use belt-type occupant restraints. Adopted from ISO 10542-1:2001 with national modifications.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 52 pages
AS/NZS 10542.1:2009
Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and
occupant-restraint systems - Four-point strap-type tiedown systems
Specifies the performance requirements and test methods, instructions and labelling for wheelchair and occupant restraint systems
using four-point strap-type tiedown systems. Adopted from ISO 10542-2:2001 with national modifications.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
AS/NZS 10542.2:2009
AS/NZS 13594:1998
Specifies the cross layer aspects of the provision of security services in the lower layers of the OSI reference model (transport,
network, datalink and physical layers). This Standard is identical with and has been reproduced from ISO/IEC TR 13594:1995.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 17 pages
Ophthalmic optics - Spectacle lenses - Vocabulary
AS/NZS ISO 13666:2011
Defines basic terms relating to ophthalmic optics, specifically to semifinished spectacle lens blanks, finished spectacle lenses and
fitting purposes. Identical to and reproduced from ISO 13666:1998(E).
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 64 pages
Optics and optical instruments - Lasers and laser-related equipment - Test methods for
laser beam power (energy) density distribution
Specifies methods by which the measurement of power (energy) density distribution is made and defines parameters for the
characterization of the spatial properties of laser power (energy) density distribution function at a given plane. Identical with and
reproduced from ISO 13694:2000.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
AS/NZS ISO 13694:2004
AS/NZS 13818.2:2002
AS/NZS 13818.4:2002
AS/NZS 13818.5:1999
AS/NZS 13818.7:1999
AS/NZS 13818.10:2002
Provides requirements and recommendations for conducting the life cycle interpretations in life cycle assessment (LCA) or life cycle
inventory analysis (LCI) studies. This Standard is identical with and has been reproduced from ISO 14043:2000.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 18 pages
Information technology - Guideline for evaluation and selection of CASE tools
AS/NZS 14102:1998
Specifies the processes and activities to be applied to the evaluation of CASE tools and selecting the most appropriate CASE tools
from several candidates. This Standard is identical with, and has been reproduced from, ISO/IEC 14102:1995.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 55 pages
Information technology - Software measurement - Functional size measurement - Definition
of concepts
Defines the fundamental concepts of functional size measurement (FSM), thereby promoting the consistent interpretation of FSM
principles which are already in existence. This Standard is identical with and has been reproduced from ISO/IEC 14143-1:1998.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 6 pages
AS/NZS 14143.1:1999
Information technology - Software measurement - Functional size measurement Conformity evaluation of software size measurement methods to AS/NZS 14143.1:1999
Establishes a framework for the conformity evaluation of a Candidate Functional Size Measurement Method against the provisions of
AS/NZS 14143.1:1999; and describes a process for conformity evaluation of whether a Candidate Functional Size Measurement
Method meets the (type) requirements of AS/NZS 14143.1:1999 such that it is an actual Functional Size Measurement Method.
Additionally, it describes the requirements for performing a conformity evaluation in order to ensure repeatability of the conformity
evaluation process, as well as consistency of decisions on conformity and the final result; and aims to sure that the output from the
conformity evaluation process is objective, impartial, consistent, repeatable, complete and auditable. Identical with and reproduced
from ISO/IEC 14143-2:2002.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 95 pages
AS/NZS 14143.2:2003
Information technology - Software measurement - Functional size measurement Verification of functional size measurement methods
Specifies a framework for verifying the statements of an FSM Method and/or for conducting tests requested by the verification
sponsor. Identical with, and has been reproduced from ISO/IEC TR 14143-3:2003.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 36 pages
AS/NZS ISO/IEC 14143.3:2004
AS/NZS 14143.4:2003
Information technology - Software measurement - Functional size measurement Determination of functional domains for use with functional size measurement
Describes the characteristics of Functional Domains and the procedures by which characteristics of Functional User Requirements
(FUR) can be used to determine Functional Domains. Identical with, and has been reproduced from ISO/IEC TR 14143.5:2004.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 36 pages
AS/NZS ISO/IEC 14143.5:2004
Welding and allied processes - Flux and gas shielded electrical welding processes Procurement guidelines for consumables
Provides a method for preparing those specific details needed for the procurement of welding consumables.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
AS/NZS ISO 14344:2005
AS/NZS 14478.1:2000
AS/NZS 14478.3:2000
AS/NZS 14598.1:2000
Specifies the framework for evaluating the quality of software product and gives the requirements for methods of software product
measurement and evaluation. This Standard is identical with and has been reproduced from ISO/IEC 14598-1:1999.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 19 pages
Information technology - Software product evaluation - Planning and management
AS/NZS 14598.2:2000
Specifies the requirements, recommendations and guidelines for a supporting function within an organization which is responsible for
the management of software product evaluation and for technologies necessary for software product evaluation. This Standard is
identical with and reproduced from ISO/IEC 14598-2:2000.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 12 pages
Information technology - Software product evaluation - Process for developers
AS/NZS 14598.3:2000
Specifies the guidelines for clarifying quality requirements and for implementing and analysing software quality measures during all
phases of the development life cycle. This Standard is identical with ISO/IEC 14598-3:1999.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
Information technology - Software product evaluation - Process for acquirers
AS/NZS 14598.4:2000
Specifies the requirements and recommendations for the systematic measurement, assessment and evaluation of software product
quality. This Standard is identical with and reproduced from ISO/IEC 14598-4:1999.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 34 pages
Information technology - Software product evaluation - Process for evaluators
AS/NZS 14598.5:2000
Specifies requirements and recommendations for the practical implementation of software product evaluation when several parties
need to understand, accept and trust evaluation results. This Standard is identical with and has been reproduced from ISO/IEC
14598.5:1998.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 35 pages
Information technology - Software product evaluation - Documentation of evaluation
modules
Specifies the structure and content of the documentation to be used to describe an evaluation module for use by other parts of this
Standard. This Standard is identical with and reproduced from ISO/IEC 14598-6:2001.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 31 pages
AS/NZS 14598.6:2001
apparatus are recommended to accommodate different end-use considerations. Alternative methods not included in this part may be
used if based on agreement between customer and supplier. Alternative methods do not necessarily provide equivalent
measurements. Adopted with modifications from ISO 14644.3:2005.
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 80 pages
Cleanrooms and associated controlled environments - Design, construction and start-up
AS/NZS ISO 14644.4:2002
Specifies requirements to provide control of airborne particulate contamination of levels appropriate for accomplishing contaminationsensitive actives. This Standard is identical with, and has been reproduced from, ISO 14644-4:2001.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 51 pages
Cleanrooms and associated controlled environments - Operations
AS/NZS ISO 14644.5:2006
Specifies basic requirements for cleanroom operations. It is intended for those planning to use and operate a cleanroom. Identical to
and reproduced from ISO 14644-5:2004.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 53 pages
Cleanrooms and associated controlled environments - Separative devices (clean air hoods,
gloveboxes, isolators and mini-environments)
Adopts ISO 14644-7:2004 to specify the minimum requirements for the design, construction, installation, test and approval of
separative devices. Identical to and reproduced from ISO 14644-7:2004.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 60 pages
Specifies requirements for the determination of system and software integrity levels for software products and systems that use
software. The Standard also defines the concepts associated with integrity levels, defines the processes for determining integrity
levels and software integrity requirements, and places requirements on each process. This Standard is identical with and has been
reproduced from ISO/IEC 15026:1998.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Advice of charge supplementary services
Specifies the advice of charge features applicable to various basic services supported by private integrated services networks. The
basic services are specified in AS/NZS 4135:1995. It is one of a series of Standards applicable to private integrated services
networking. This Standard is identical with and has been reproduced from ISO/IEC 15049:1997.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 67 pages
AS/NZS 15049:1999
AS/NZS 15051:1999
AS/NZS 15054:1999
point is defined in AS/NZS 4136.1:1995. It is one of a series of Standards applicable to private integrated services networking. This
Standard is identical with and has been reproduced from ISO/IEC 15054:1997.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 39 pages
Information technology - Telecommunications and information exchange between systems
- Private integrated services network - Specification, functional model and information
flows - Transit counter additional network feature
Specifies the transit counter additional network feature applicable to various basic services supported by private integrated services
networks. The basic services are specified in AS/NZS 4135:1995. This Standard is one of a series of Standards applicable to private
integrated services networking. This Standard is identical with and has been reproduced from ISO/IEC 15055:1997.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 10 pages
AS/NZS 15055:1999
AS/NZS 15056:1999
Guidelines on the application of ISO 9001:2000 for the food and drink industry
AS/NZS ISO 15161:2003
Specifies guidance to organizations in applying the requirements of ISO 9001 during the development and implementation of a
quality management system in the food and drink industry. This Standard is identical to and has been reproduced from ISO
15161:2001.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 35 pages
Medical laboratories - Particular requirements for quality and competence
NZS/ISO 15189:2007
Provides requirements for competence and quality that are particular to medical laboratories. Medical laboratory services include
arrangements for requisition, patient preparation, patient identification, collection of samples, transportation, storage, processing and
examination of clinical samples, together with subsequent validation, interpretation, reporting and advice, in addition to the
considerations of safety and ethics in medical laboratory work. Bodies engaged in the recognition of the competence of medical
laboratories will also be able to use this Standard as the basis for their activities. Demonstrated conformity to this Standard does not
imply conformity of the quality management system within which the laboratory operates to all the requirements of ISO 9001. This
International Standard is not intended to be used for the purposes of certification. Identical to and adopted from ISO 15189:2007.
Adopted Standard
$167.20+GST (Members), $209.00+GST (Retail), 48 pages
Guide for AS/NZS ISO/IEC 12207 (Software life cycle processes)
AS/NZS 15271:1999
Provides users of AS/NZS ISO/IEC 12207 with further explanation in relation to various types of software and indicates which
processes may be relevant in reference to contractual situations, on a project irrespective of size or complexity, in an organization as
a self-assessment or for software process improvement initiatives. This Standard is identical with and has been reproduced from
ISO/IEC TR 15271:1998.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 49 pages
Systems engineering - System life cycle processes
AS/NZS 15288:2003
Provides a common process framework covering the life cycle of man-made systems. This life cycle spans the conception of ideas
through to the retirement of a system. It provides the processes for acquiring and supplying systems. In addition, this framework
provides for the assessment and improvement of the life cycle processes. This Standard is identical to and reproduced from
ISO/IEC 15288:2002.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 62 pages
Systems and software engineering - Content of systems and software life cycle process
information products (Documentation)
Outlines a set of processes for managing and performing the stages for systems life cycle, (in conformance with AS/NZS 15288 and
AS/NZS ISO/IEC 12207). Identical to ISO/IEC 15289:2006.
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 64 pages
Information technology - Open distributed processing - Reference model - Enterprise
language
Provides a language (the enterprise language) comprising concepts, structures and rules for developing, representing, and
reasoning about a specification of an ODP system from the enterprise viewpoint. It also provides rules which establish
correspondences between the enterprise language and the other viewpoint languages to ensure the overall consistency of a
specification. Identical with and reproduced from ISO/IEC 15414:2002.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 20 pages
AS/NZS ISO/IEC 15414:2003
Information technology - Security techniques - A framework for IT security assurance Overview and framework
Presents a variety of assurance methods, and guides the IT Security Professional in the selection of an appropriate assurance
method (or combination of methods) to achieve confidence that a given deliverable satisfies its stated IT security assurance
requirements. Identical to and reproduced from ISO/IEC TR 15443-1:2005.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 32 pages
AS/NZS ISO/IEC 15443.1:2006
Describes the standard CDIF transfer encoding for the standard CDIF transfer syntax. Identical with and reproduced from ISO/IEC
15475-3:2002.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 20 pages
AS/NZS ISO/IEC 15476.1:2003 Information technology - CDIF semantic metamodel - Foundation
Defines the Foundation subject area of the CDIF semantic metamodel. This subject area contains the basic objects on which all
other objects, including those defined using extensibility, must be based. Identical with and reproduced from ISO/IEC 15476.1:2002.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 11 pages
AS/NZS ISO/IEC 15476.2:2003 Information technology - CDIF semantic metamodel - Common
Defines the Common Subject Area of the CDIF semantic metamodel. This subject area contains meta-objects that are used as the
basis of the other subject area standards, and also meta-relationships and meta-attributes that are applicable to all meta-objects.
Identical with and reproduced from ISO/IEC 15476.2:2002.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 41 pages
AS/NZS ISO/IEC 15476.3:2006 Information technology - CDIF semantic metamodel - Data definitions
Provides a definition of Data Definition Subject Area of the CDIF semantic metamodel. (This subject area contains meta-objects that
are used as a basis of the data components of other subject area standards, and also meta-relationships and meta-attributes that
are applicable to all data-related meta-objects). Identical to and reproduced from ISO/IEC 15476-3:2006.
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 100 pages
AS/NZS ISO/IEC 15476.4:2007 Information technology - CDIF semantic metamodel - Data models
Provides modelling tools and meta tape repositories with definition of the portion of the CDIF semantic metamodel that supports
general tape modelling. Identical to ISO/IEC 15476-4:2005.
Joint Australian/New Zealand Standard
$178.40+GST (Members), $223.00+GST (Retail), 128 pages
AS/NZS ISO/IEC 15476.6:2007 Information technology - CDIF semantic metamodel - State/event models
Provides modelling tools and meta-data repositories with a definition of the State/Event Subject Area of the CDIF semantic
metamodel. Identical to ISO/IEC 15476-6:2006.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 28 pages
AS/NZS ISO/IEC 15504.1:2005 Information technology - Process assessment - Concepts and vocabulary
Provides overall information on the concepts of process assessment and its use in the two contexts of process improvement and
process capability determination. Identical to and reproduced from ISO/IEC 15504-1:2004.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 28 pages
AS/NZS ISO/IEC 15504.2:2004 Information technology - Process assessment - Performing an assessment
Specifies the assessment of process and the application of process assessment for improvement and capability determination. It
defines the minimum set of requirements for performing an assessment that will ensure assessment results are objective, impartial,
consistent, repeatable and representative of the assessed processes. Identical to and reproduced from ISO/IEC 15504-2:2003.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 16 pages
AS/NZS ISO/IEC 15504.3:2004 Information technology - Process assessment - Guidance on performing an assessment
The objective of this Standard is to provide guidance on meeting the minimum set of requirements for performing an assessment
contained in AS/NZS ISO/IEC 15504.2. Identical to and reproduced from ISO/IEC 15504-3:2004.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 54 pages
AS/NZS 15507:1999
Information and documentation - International Standard Identifier for Libraries and Related
Organizations (ISIL)
Defines and promotes the use of a set of standard identifiers for the unique identification of libraries and related organizations with a
minimum impact on already existing systems. Identical with, and has been reproduced from ISO 15511:2003.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
AS/NZS ISO 15511:2004
documentation and for the purposes of collecting societies involved in the administration of rights to such works. Identical to and
reproduced from ISO 15707:2001.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Information and documentation - The Dublin Core metadata element set
AS/NZS ISO 15836:2004
Provides a wide variety of information providers in the arts, sciences, education, business and government sectors with guidelines
for cross domain information resource description. Identical to and reproduced from ISO 15836:2003.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Software and system engineering - High-level Petri nets - Concepts, definitions and
graphical notation
Specifies and defines a Petri net technique, including its syntax and semantics. It provides a reference definition that can be used
both within and between organisations, to ensure a common understanding of the techniques and of the specifications written using
the technique. Identical to and reproduced from ISO/IEC 15909-1:2004.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 52 pages
AS/NZS ISO/IEC 15909.1:2006
Software engineering - Guide for the application of ISO/IEC 12207 to project management
AS/NZS ISO/IEC 16326:2006
Provides Project Managers with guidance that supplements AS/NZS ISO/IEC 12207, Information technology - Software life cycle
processes, in the area of Management Process. Identical to and reproduced from ISO/IEC TR 16326:1999.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 100 pages
Quality management - Particular requirements for the application of ISO 9001:2008 for
automotive production and relevant service part organizations
Specifies requirements for a quality management system where an organisation needs to demonstrate its ability to consistently
provide product that meets customer and applicable statutory and regulatory requirements. Identical with and reproduced from
ISO/TS 16949:2009.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 56 pages
SAA/SNZ TS ISO 16949:2011
General criteria for the operation of various types of bodies performing inspection
AS/NZS ISO/IEC 17020:2000
Provides general requirements for the operation of bodies that perform inspections, and criteria for independence. It does not cover
testing laboratories, certification bodies or suppliers' declarations of conformity. Identical with and reproduced from ISO/IEC
17020:1998.
Joint Australian/New Zealand Standard
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas
shielded metal arc welding of stainless and heat-resisting steels - Classification
Specifies a classification system for tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical
composition, the type of electrode core, shielding gas, welding position and the all-weld metal mechanical properties, in the as
welded or heat treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels.
Reproduced from ISO17633:2004 with national modifications.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 36 pages
AS/NZS ISO 17633:2006
Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of
creep-resisting steels - Classification
Provides requirements for classification of tubular cored electrodes with gas shield for metal arc welding of creep-resisting steels.
Adopted from ISO 17634:2004 with national modifications.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 36 pages
AS/NZS ISO/IEC 18033.1:2006 Information technology - Security techniques - Encryption algorithms - General
Provides definitions that apply in subsequent parts of ISO/IEC 18033. The nature of encryption is introduced, and certain general
aspects of its use and properties are described. Identical to and reproduced from ISO/IEC 18033-1:2005.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
Information technology - Security techniques - Encryption algorithms - Asymmetric
ciphers
Provides the Australian information security programming and development community with clear guidance to the selection and
implementation of appropriate encryption algorithms. Identical to ISO/IEC 18033-2:2006.
Joint Australian/New Zealand Standard
$178.40+GST (Members), $223.00+GST (Retail), 136 pages
AS/NZS ISO/IEC 18033.2:2008
AS/NZS ISO/IEC 18033.3:2006 Information technology - Security techniques - Encryption algorithms - Block ciphers
Specifies block cipher algorithms. Identical to and reproduced from ISO/IEC 18033-3:2005.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 80 pages
AS/NZS ISO/IEC 18033.4:2006 Information technology - Security techniques - Encryption algorithms - Stream ciphers
Specifies stream cipher algorithms. Identical to and reproduced from ISO/IEC 18033-4:2005.
Joint Australian/New Zealand Standard
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded
metal arc welding of high strength steels - Classification
Provides requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of high-strength
steels. Adopted from ISO 18276:2005 with national modifications.
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 40 pages
Provides users with information on existing geographic information standards in use within the international community, other than
local standards (eg. ANZLIC); and identifies components and elements that can be harmonized with the ISO 19100 series.
Reproduced from and identical to ISO/TR 19120:2001.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 44 pages
Geographic information - Imagery and gridded data
AS/NZS ISO 19121:2006
To provide systems designers and analysts with aspects of imagery and gridded data that have been standardized or are being
standardized in other ISO committees and external standards organizations, and that influence or support the establishment of raster
and gridded data standards for geographic information, and to describe the components of identified ISO and external imagery and
gridded data standards that can be harmonized with the ISO 19100 series of geographic information/geomatics standards.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 48 pages
Geographic information/Geomatics - Qualification and certification of personnel
AS/NZS ISO 19122:2006
Provides the geographical information and geomatics community with definitions to describe a system for the qualification and
certification of personnel in the field of Geographic Information/Geomatics by a central independent body. Reproduced from and
identical to ISO/TR 19122:2004.
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 112 pages
Geographic information - Schema for coverage geometry and functions
AS/NZS ISO 19123:2006
Provides systems users and designers with definitions of conceptual schema for the spatial characteristics of coverages. Identical to
and reproduced from ISO 19123:2005.
Joint Australian/New Zealand Standard
$231.20+GST (Members), $289.00+GST (Retail), 76 pages
Geographic information - Simple feature access - Common architecture
AS/NZS ISO 19125.1:2004
Provides a common architecture and define terms to use within the architecture.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 52 pages
Geographic information - Simple feature access - SQL option
AS/NZS ISO 19125.2:2004
Provides an SQL schema that supports storage, retrieval, query and update of simple geospatial feature collections via the SQL Call
Level Interface (SQL/CLI) (ISO/IEC 9075-3:1999).
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 72 pages
Geographic information - Feature concept dictionaries and registers
AS/NZS ISO 19126:2011
Specifies a schema for feature concept dictionaries to be established and managed as registers. It does not specify schemas for
feature catalogues or for the management of feature catalogues as registers. However, because feature catalogues are often
derived from feature concept dictionaries, this Standard does specify a schema for a hierarchical register of feature concept
dictionaries and feature catalogues. Identical with and reproduced from ISO 19126:2009.
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 52 pages
Geographic information - Geodetic codes and parameters
AS/NZS ISO 19127:2006
Provides system designers and analysts the rules for the population and maintenance of registers of geodetic codes and parameters
and to identify the data elements, in compliance with ISO 19111 and ISO 19135, required within these registers. Reproduced from
and identical to ISO/TS 19127:2005.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 28 pages
Geographic information - Web map server interface
AS/NZS ISO 19128:2006
Provides systems users and designers with the specifics of the behaviour of a service that produces spatially referenced maps
dynamically from geographic information. It specifies operations to retrieve a description of the maps offered by a server, to retrieve
a map, and to query a server about features displayed on a map. Identical to and reproduced from ISO 19128:2005.
Software engineering - IFPUG 4.1 Unadjusted functional size measurement method Counting practices manual
Provides Software Engineers with a clear and detailed description of function point counting; a foundation to ensure that counts are
consistent; guidance to allow function point counting of Functional User Requirements from the deliverables of popular software
development methodologies and techniques; and a framework to enable automated support for function point counting. Identical to
ISO/IEC 20926:2003.
Joint Australian/New Zealand Standard
$371.20+GST (Members), $464.00+GST (Retail), 360 pages
AS/NZS ISO/IEC 20926:2008
Information and documentation - Records management processes - Metadata for records Conceptual and implementation issues
Establishes a framework for defining metadata elements consistent with the principles and implementation considerations outlined in
ISO 23081-1:2006. It also identifies some of the critical decision points that need to be addressed and documented to enable
implementation of metadata for managing records. Identical to ISO 23081-2:2007.
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 44 pages
AS/NZS ISO 23081.2:2007
Software engineering - NESMA functional size measurement method version 2.1 Definitions and counting guidelines for the application of Function Point Analysis
Provides Software Engineers with the NESMA version 2.1 method to measure the functional size of software; gives guidelines on
how to determine the components of functional size of software; specifies how to calculate the functional size as a result of the
method; and gives guidelines for the application of the method. Identical to and reproduced from ISO/IEC 24570:2005.
Joint Australian/New Zealand Standard
$188.00+GST (Members), $235.00+GST (Retail), 132 pages
AS/NZS ISO/IEC 24570:2007
Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) Requirements for quality of Commercial Off-The-Shelf (COTS) software product and
instructions for testing
Provides a guide for Commercial Off-The-Shelf (COTS) software products quality guide; requirements for test; and instructions for
conformity. Identical ISO/IEC 25051:2006.
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 36 pages
AS/NZS ISO/IEC 25051:2007
Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) Common Industry Format (CIF) for usability test reports
Provides software usability professionals within supplier organisations and customer organisations with a software usability testing
Standard; the Standard is a key factor in predicting successful deployment of software. Identical to and reproduced from ISO/IEC
25062:2006.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 56 pages
AS/NZS ISO/IEC 25062:2006
overcurrents and both the special test and the theoretical evaluation method used to demonstrate the ability to withstand the relevant
dynamic effects. Adopted with national modifications from IEC 60076-5, Ed. 3.0 (2006).
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 44 pages
Power transformers - Part 10: Determination of sound levels
AS/NZS 60076.10:2009
Specifies methods of measuring sound pressure and sound intensity so that the sound power levels emitted by power transformers
and associated auxiliaries may be determined. Adopted from IEC 60076-10, Ed.1 (2005) with national modifications.
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 44 pages
Power transformers - Part 10.1: Determination of sound levels - Application guide
AS/NZS 60076.10.1:2009
Provides supporting information to help both manufacturers and purchasers apply the measurement techniques described in IEC
60076-10. The sources and characteristics of transformer and reactor sound are described. Practical guidance on making
measurements is given, and factors that may influence the accuracy of the methods are discussed. This application guide also
clarifies those factors which should be agreed between manufacturer and purchaser when specifying a transformer or reactor, and
indicates why values measured in the factory may differ from those measured on site. Identical to IEC 60076-10-1, Ed.1 (2005).
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 48 pages
Explosive atmospheres - Part 0: Equipment - General requirements
AS/NZS 60079.0:2012
Specifies additional test requirements for equipment operating outside the standard temperature range, but further additional
consideration and additional testing may be required for equipment operating outside the standard atmospheric pressure range and
standard oxygen content, particularly with respect to types of protection that depend on quenching of a flame such as flameproof
enclosure d (IEC 60079-1) or limitation of energy, intrinsic safety i (IEC 60079-11). Identical to and reproduced from IEC 600790 Ed.6.0 (2011).
Joint Australian/New Zealand Standard
$178.40+GST (Members), $223.00+GST (Retail), 104 pages
AS/NZS 60079.0:2008 RUL EA.2 Rulings to explosive atmospheres Standards - Ruling 2: Thermal endurance test (Ruling to
AS/NZS 60079.0)
The Enquiries and Replies in this Ruling are identical with IEC Interpretation Sheets issued by IEC Committee TC 31, relating to IEC
60079-0, Ed.3.0 (1998) and its Amendment 1, which was adopted as AS/NZS 60079.0:2000, IEC 60079-0, Ed.4.0 (2004), which was
adopted as AS/NZS 60079.0:2005 and IEC 60079-0, Ed.5.0 (2007), which was adopted as AS/NZS 60079.0:2008.
Joint Australian/New Zealand Standard
$34.40+GST (Members), $43.00+GST (Retail), 4 pages
Explosive atmospheres - Equipment protection by flameproof enclosures 'd'
AS/NZS 60079.1:2007
Sets out the requirements for the construction and testing of electrical apparatus with pressurized enclosures, of protection type p,
intended for use in explosive gas atmospheres. Identical with and reproduced from IEC 60079-1, Ed.6.0 (2007).
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 76 pages
Amendment 1, 2008 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60079.1.1:2002
AS/NZS 60079.5:2007
Sets out the requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex
components in the type of protection powder filling 'q', intended for use in explosive gas atmospheres.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
Explosive atmospheres - Equipment protection by oil immersion o
AS/NZS 60079.6:2007
Sets out the requirements for the construction and testing of oil-immersed electrical equipment, oil-immersed parts of electrical
equipment and Ex components in the type of protection oil immersion 'o', intended for use in explosive gas atmospheres.
Joint Australian/New Zealand Standard
$62.40+GST (Members), $78.00+GST (Retail), 20 pages
Explosive atmospheres - Equipment protection by increased safety 'e'
AS/NZS 60079.7:2006
Specifies the requirements for the design, construction, testing and marking of electrical apparatus with type of protection increased
safety e intended for use in explosive gas atmospheres. Applies to electrical apparatus where the rated voltage does not exceed 11
kV r.m.s. a.c. or d.c. Identical to IEC 60079-7, Ed. 4.0 (2006).
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 80 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Explosive atmospheres - Classification of areas - Explosive gas atmospheres
AS/NZS 60079.10.1:2009
Sets out requirements for the classification of areas where flammable gas or vapour risks might arise, in order to permit the proper
selection and installation of electrical apparatus for use in such hazardous areas. This Standard is for the use of manufacturers and
installers of electrical equipment as well as by electrical inspecting authorities. It provides guidance to industries and statutory
authorities concerned with the classification of hazardous areas.
Joint Australian/New Zealand Standard
$231.20+GST (Members), $289.00+GST (Retail), 184 pages
Explosive atmospheres - Part 10.2: Classification of areas - Combustible dust atmospheres
AS/NZS 60079.10.2:2011
Enables the identification and classification of areas where explosive dust atmospheres and combustible dust layers are present, in
order to permit the proper assessment of ignition sources in such areas.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 36 pages
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety i
AS/NZS 60079.11:2011
Establishes the specific requirements for design, construction and testing of electrical equipment with protection by intrinsic safety i
for use in flammable gas and vapour atmospheres and explosive dust atmospheres. It is intended to be read in conjunction with
AS/NZS 60079.0 Explosive atmospheres - Part 0: Equipment - General requirements.
Joint Australian/New Zealand Standard
$220.00+GST (Members), $275.00+GST (Retail), 148 pages
AS/NZS 60079.12:2000
AS/NZS 60079.20.1:2012
AS/NZS 60079.29.1:2008
AS/NZS 60079.29.1:2008 RUL EA.1 Rulings to explosive atmospheres Standards - Ruling 1: Drop test fail criterion (Ruling
to AS/NZS 60079.29.1:2008)
The Enquiry and Reply in this Ruling are identical with an IEC Interpretation Sheet issued by IEC Committee TC 31, relating to IEC
60079-29-1, Ed.1.0 (2007), which was adopted as AS/NZS 60079.29.1:2008.
Joint Australian/New Zealand Standard
$34.40+GST (Members), $43.00+GST (Retail), 2 pages
Explosive atmospheres - Gas detectors - Selection, installation, use and maintenance of
detectors for flammable gases and oxygen
Gives guidance on, and recommended practice for, the selection, installation, safe use and maintenance of electrically operated
group II apparatus intended for use in industrial and commercial safety applications for the detection and measurement of flammable
gases. Identical to IEC 60079-29-2, Ed. 1.0 (2007).
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 96 pages
AS/NZS 60079.29.2:2008
Explosive atmospheres - Part 29.4: Gas detectors - Performance requirements of open path
detectors for flammable gases
Specifies performance requirements of equipment for the detection and measuring of flammable gases or vapours in ambient air by
measuring the spectral absorption by the gases or vapours over extended optical paths, ranging typically from one metre to a few
kilometres.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 40 pages
AS/NZS 60079.29.4:2011
AS/NZS 60079.30.1:2007
Explosive atmospheres - Electrical resistance trace heating - Application guide for design,
installation and maintenance
Provides guidance for the application of electrical resistance heating systems in areas where explosive gas atmospheres may be
present; it also provides guidance for the design, installation and maintenance of trace heating equipment and associated control
and monitoring equipment. Based on IEC 60079-30-2, Ed.1.0 (2007) with national modifications.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 56 pages
AS/NZS 60079.30.2:2007
Explosive atmospheres - Part 35.1: Caplights for use in mines susceptible to firedamp General requirements - Construction and testing in relation to the risk of explosion
Specifies the requirements for the construction, testing and marking of caplights, including caplights with a point of connection for
other equipment, for use in mines susceptible to firedamp (Group I - Electrical equipment for explosive gas atmospheres as defined
in AS/NZS 60079.0). Identical to and reproduced from IEC 60079-35-1, Ed.1.0 (2011).
Joint Australian/New Zealand Standard
$90.40+GST (Members), $113.00+GST (Retail), 24 pages
Explosive atmospheres - Part 35.2: Caplights for use in mines susceptible to firedamp Performance and other safety-related matters
Details those performance and other safety features of caplights, including those with a point of connection for another equipment,
not covered in AS/NZS 60079.35.1, but which are important for the safety and working conditions of the user. It may also be applied
to caplights for use in mines not likely to be endangered by firedamp. Identical to and reproduced from IEC 60079-35-2, Ed. 1.0
(2011).
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 16 pages
AS/NZS 60079.35.2:2012
AS/NZS 60112:2003
AS/NZS 60265.1:2001
High-voltage switches - Switches for rated voltages above 1 kV and less than 52 kV
Applies to three-phase a.c. switches and switch-disconnectors having making and breaking current ratings, for indoor and outdoor
installations, for rated voltages above 1 kV and less than 52 kV and for rated frequencies from 16 2/3 Hz up to and including 60 Hz.
Is also applicable to the operating devices of these switches and to their auxiliary equipment. It is intended to be read in conjunction
with AS/NZS 2650. This Standard is technically equivalent to and contains the full content of IEC 60265:1998 and its
Corrigendum:2000.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 47 pages
AS/NZS 60269.1:2000
(Withdrawn)
AS/NZS 60269.2.0:2000
(Withdrawn)
AS/NZS 60269.2.1:2001
(Withdrawn)
AS/NZS 60269.3.0:2000
(Withdrawn)
(Withdrawn)
Appliance couplers for household and similar general purposes - Part 1: General
requirements
Provides the Australian and New Zealand electrical industries, including manufacturers and regulatory bodies, with general safety
requirements for appliance couplers for household and similar general purposes, and which may be used as the basis for approval
for sale or for connection to supply in Australia and New Zealand. Adopted, with national modifications, from IEC 60320-1, Ed. 2.1
(2007).
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 124 pages
AS/NZS 60320.1:2012
Appliance couplers for household and similar general purposes - Sewing machine
couplers
Specifies essential safety and associated requirements for special purpose appliance couplers for household sewing machines and
suitable for a.c. only with a rated voltage not exceeding 250V and a rated current not exceeding 25A. To be used in conjunction with
AS/NZS 60320.1. Adopts, with national modifications, IEC 60320-2-1, Ed. 2.0 (2000).
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
AS/NZS 60320.2.1:2004
Appliance couplers for household and similar general purposes - Interconnection couplers
for household and similar equipment
Specifies essential safety and associated requirements for two-pole interconnection couplers for a.c. only, with or without an earthing
contact and having a rated voltage not exceeding 250V and a rated current not exceeding 16A. The couplers are intended for the
interconnection of the electrical supply to electrical appliances or equipment. To be used in conjunction with AS/NZS 60320.1.
Adopts, with national modifications, IEC 60320-2-2, Ed. 2.0 (1998).
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 44 pages
AS/NZS 60320.2.2:2004
AS/NZS 60335.1:2002
Specifies general safety requirements for approval and test purposes. This Standard is an adoption with national modifications and
contains the full text of IEC 60335-1:2001.
Reprinted to incorporate Amendments 1, 2, 3 and 4
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 133 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 4, 2011 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Part 1: General
AS/NZS 60335.1:2011 (Excludes IEC text)
requirements
This Standard is the formal adopting document of IEC 60335-1 Ed 5 which has been adopted with national variations. The IEC text,
which is not included, deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not
more than 250 V for single-phase appliances and 480 V for other appliances. Battery-operated appliances and other d.c. supplied
appliances are within the scope of this standard. Adopted, with national modifications, from IEC 60335-1 Ed 5.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 15 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Part 1: General
AS/NZS 60335.1:2011 (Includes IEC text)
requirements
Adopted from and includes, with national variations, IEC 60335-1 Ed 5. Deals with the safety of electrical appliances for household
and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.
Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$188.00+GST (Members), $235.00+GST (Retail), 167 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Particular requirements for vacuum
cleaners and water suction cleaning appliances
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-2:2002.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2007; Will be superseded by AS/NZS 60335.2.2:2010 on 29
October 2013, but remains current until then
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 24 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.2:2002
Household and similar electrical appliances - Safety - Part 2.2: Particular requirements for
vacuum cleaners and water-suction cleaning appliances
This Standard does not include the text of IEC 60335.2.2 Ed.6. It deals with the safety of electric vacuum cleaners and water-suction
cleaning appliances for household and similar purposes, including vacuum cleaners for animal grooming, their rated voltage being
not more than 250 V. It also applies to centrally-sited vacuum cleaners and automatic battery-powered cleaners. This standard also
applies to motorized cleaning heads and current-carrying hoses associated with a particular vacuum cleaner.
Supersedes AS/NZS 60335.2.2:2002 on 29 October 2013; Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
$33.60+GST (Members), $42.00+GST (Retail), 11 pages
AS/NZS 60335.2.2:2010
AS/NZS 60335.2.3:2002
Household and similar electrical appliances - Safety - Particular requirements for spin
extractors
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-4:2002.
Reprinted to incorporate Amendment 1:2004 and Amendment 2:2006; Will be superseded by AS/NZS 60335.2.4:2010 on 31 May
2013 but remains current until then
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 19 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2006 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.4:2002
Household and similar electrical appliances - Safety - Particular requirements for spin
extractors
This Standard does not include the text of IEC 60335.2.4 Ed.6 which provides manufacturers, designers, regulatory authorities,
testing laboratories and similar organizations with safety requirements designed to give the user protection against hazards that
might occur during normal operation and abnormal operation of the appliance and which may be used as the basis for approval for
sale or for connection to the electricity supply mains in Australia and New Zealand. Adopted from the sixth edition of IEC 60335-2-4.
Reprinted to incorporate Amendment 1:2010
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
AS/NZS 60335.2.4:2010
AS/NZS 60335.2.6:2008
Household and similar electrical appliances - Safety - Particular requirements for shavers,
hair clippers and similar appliances
Deals with the safety of electric shavers, hair clippers and similar appliances, their rated voltage being not more than 250 V, intended
for household and similar purposes. Examples of similar appliances are those used for manicure and pedicure. Appliances intended
to be used by laymen in shops and on farms, are within the scope of this standard. Examples of such appliances are animal clippers,
animal shearers and appliances for hairdressers. Modified adoption of IEC 60335.2.8:2002.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.8:2004
Household and similar electrical appliances - Safety - Particular requirements for grills,
toasters and similar portable cooking appliances
Deals with the safety of electric portable appliances for household and similar purposes that have a cooking function such as baking,
roasting and grilling, their rated voltage being not more than 250 V. Adopted from IEC 60335-2-9 Ed 6 with national modifications.
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 39 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.9:2009
Household and similar electrical appliances - Safety - Particular requirements for floor
treatment machines and wet scrubbing machines
Deals with the safety of electric floor treatment and wet scrubbing machines intended for household and similar purposes, their rated
voltage being not more than 250 V. Examples of floor treatment machines are floor buffers, polishers and waxers. Examples of wet
scrubbing machines are floor scrubbers, rug shampooers and upholstery shampooers. Identical to and reproduced from IEC
60335.2.10 Ed. 5:2005.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 19 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.10:2006
Household and similar electrical appliances - Safety - Particular requirements for tumble
dryers
Deals with the safety of electric tumble dryers intended for household and similar purposes, their rated voltage being not more than
250 V for single-phase appliances and 480 V for other appliances. Adopted from IEC 60335-2-11 Ed 7 with national modifications.
Reprinted to incorporate Amendment 1:2010
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 35 pages
AS/NZS 60335.2.11:2009
AS/NZS 60335.2.12:2004
Household and similar electrical appliances - Safety - Particular requirements for deep fat
fryers, frying pans and similar appliances
Deals with the safety of electric deep fat fryers, frying pans and other appliances in which oil is used for cooking, and intended for
household use only, their rated voltage being not more than 250 V. Modified adoption of IEC 60335.2.13:2002.
Reprinted to incorporate Amendment 1:2005 & Amendment 2:2008; Will be superseded by AS/NZS 60335.2.13:2010 on 29 October
2013, but remains current until then
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 15 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2008 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.13:2004
Household and similar electrical appliances - Safety - Particular requirements for deep fat
fryers, frying pans and similar appliances
This Standard does not include the text of IEC 60335.2.13 Ed.6. It deals with the safety of electric deep fat fryers having a
recommended maximum quantity of oil not exceeding 5 l, frying pans, woks and other appliances in which oil is used for cooking,
and intended for household use and similar use, their rated voltage being not more than 250 V.
Supersedes AS/NZS 60335.2.13:2004 on 29 October 2013
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
AS/NZS 60335.2.13:2010
AS/NZS 60335.2.13:2010 (Includes IEC text) Household and similar electrical appliances - Safety - Particular requirements
for deep fat fryers, frying pans and similar appliances
Includes the text of IEC 60335.2.13 Ed.6. It deals with the safety of electric deep fat fryers having a recommended maximum
quantity of oil not exceeding 5 l, frying pans, woks and other appliances in which oil is used for cooking, and intended for household
use and similar use, their rated voltage being not more than 250 V. Identical to and adopted from IEC 60335.2.13 Ed.6.
Supersedes AS/NZS 60335.2.13:2004 on 29 October 2013
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 23 pages
Household and similar electrical appliances - Safety - Particular requirements for kitchen
machines
Deals with the safety of electric kitchen machines for household and similar purposes, their rated voltage being not more than 250 V.
Based on IEC 60335-2-14 Ed.5.0 with national modifications.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 36 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.14:2007
Household and similar electrical appliances - Safety - Part 2.17: Particular requirements for
blankets, pads, clothing and similar flexible heating appliances
This standard deals with the safety of electric blankets, pads and other flexible appliances which heat the bed or human body, for
household and similar purposes, their rated voltage being not more than 250 V. It also applies to control units supplied with the
appliance. Modified adoption of IEC 60335.2.17:2002.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2009
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 54 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.17:2004
Household and similar electrical appliances - Safety - Particular requirements for storage
water heaters
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-21:2002.
Reprinted to incorporate Amendments 1 to 3
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 27 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.21:2002
AS/NZS 60335.2.23:2004
AS/NZS 60335.2.24:2010
This Standard does not include the text of IEC 60335.2.24 Ed.7. It deals with the safety of the following appliances, their rated
voltage being not more than 250 V for single-phase appliances, 480 V for other appliances and 24 V d.c. for appliances when battery
operated: refrigerating appliances for household and similar use; ice-makers incorporating a motor-compressor and ice-makers
intended to be incorporated in frozen food storage compartments; refrigerating appliances and ice-makers for use in camping,
touring caravans and boats for leisure purposes. These appliances may be operated from the mains, from a separate battery or
operated either from the mains or from a separate battery.
Supersedes AS/NZS 60335.2.24:2003 on 29 October 2013
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 11 pages
AS/NZS 60335.2.24:2010 (Includes IEC text) Household and similar electrical appliances - Safety - Particular requirements
for refrigerating appliances, ice-cream appliances and ice-makers
Includes the text of IEC 60335.2.24 Ed.7. It deals with the safety of the following appliances, their rated voltage being not more than
250 V for single-phase appliances, 480 V for other appliances and 24 V d.c. for appliances when battery operated: refrigerating
appliances for household and similar use; ice-makers incorporating a motor-compressor and ice-makers intended to be incorporated
in frozen food storage compartments; refrigerating appliances and ice-makers for use in camping, touring caravans and boats for
leisure purposes. These appliances may be operated from the mains, from a separate battery or operated either from the mains or
from a separate battery. Adopted from IEC 60335-2-24 Ed 7 with national variations.
Supersedes AS/NZS 60335.2.24:2003 on 29 October 2013
Joint Australian/New Zealand Standard
$251.20+GST (Members), $314.00+GST (Retail), 63 pages
Household and similar electrical appliances - Safety - Particular requirements for
microwave ovens, including combination microwave ovens
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-25:2002.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 31 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 4, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.25:2002
AS/NZS 60335.2.25:2011 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.25: Particular
requirements for microwave ovens including combination microwave ovens
This Standard is the formal adopting document of IEC 60335-2-25 Ed 6 which has been adopted without national variation. The IEC
text, which is not included, deals with the safety of microwave ovens for household and similar use, their rated voltage being not
more than 250 V. This standard also deals with combination microwave ovens, for which Annex AA is applicable, and with
microwave ovens intended to be used on board ships, for which Annex BB is applicable.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
AS/NZS 60335.2.25:2011 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.25: Particular
requirements for microwave ovens including combination microwave ovens
Adopted from and includes, without national variation, IEC 60335-2-25 Ed 6. Deals with the safety of microwave ovens for household
and similar use, their rated voltage being not more than 250 V. This standard also deals with combination microwave ovens, for
which Annex AA is applicable, and with microwave ovens intended to be used on board ships, for which Annex BB is applicable.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 35 pages
Household and similar electrical appliances - Safety - Particular requirements for clocks
AS/NZS 60335.2.26:2006
Deals with the safety of electric clocks having a rated voltage not more than 250 V. Examples of appliances that are within the
scope of this standard are alarm clocks; spring-driven clocks with an electrically operated winding mechanism; clocks incorporating
driving means other than motors. Does not apply to battery-operated clocks; appliances intended exclusively for industrial purposes;
appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive
atmosphere (dust, vapour or gas); clocks having other functions, whether or not in combination with time indication, such as master
control clocks and timers for cooking ranges, washing machines and similar appliances; clocks for "clocking-in" purposes; clocks
incorporating electronic circuits only. Based on IEC 60335-2-26 Ed. 4:2005 with national modifications.
Reprinted to incorporate Amendment 1:2009
AS/NZS 60335.2.27:2004
AS/NZS 60335.2.27:2010 (Includes IEC text) Household and similar electrical appliances - Safety - Particular requirements
for appliances for skin exposure to ultraviolet and infrared radiation
Includes the text of IEC 60335.2.27 Ed.5. It deals with the safety of electrical appliances incorporating emitters for exposing the skin
to ultraviolet or infrared radiation, for household and similar use, their rated voltage being not more than 250 V for single-phase
appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a
source of danger to the public, such as appliances intended to be used in tanning salons, beauty parlours and similar premises, are
also within the scope of this standard. Adopted from IEC 60335-2-27 Ed 5 with national variations.
Supersedes AS/NZS 60335.2.27:2004 on 29 October 2013
Joint Australian/New Zealand Standard
$167.20+GST (Members), $209.00+GST (Retail), 39 pages
Household and similar electrical appliances - Safety - Particular requirements for sewing
machines
Deals with the safety of electric sewing machines for household and similar use, their rated voltage being not more than 250 V for
single-phase appliances and 480 V for other appliances. Overlock machines and electrical sets are within the scope of the standard.
Appliances not intended for normal household use, but that nevertheless may be a source of danger to the public, such as sewing
machines intended to be used by laymen in shops and in light industry, are within the scope of this standard. Does not apply to
appliances intended exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail,
such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). Identical to and reproduced from IEC 60335-2-28
Ed. 4:2005.
Reprinted to incorporate Amendment1:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 19 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.28:2006
Household and similar electrical appliances - Safety - Particular requirements for battery
chargers
Deals with the safety of electric battery chargers for household use having an output at safety extra-low voltage, their rated voltage
being not more than 250 V. This standard also includes battery chargers intended for use in garages, shops, light industry and on
farms. Modified adoption of IEC 60335.2.29:2003.
Reprinted to incorporate Amendment 1:2004 and Amendment 2:2010
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 19 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.29:2004
AS/NZS 60335.2.30:2009
Household and similar electrical appliances - Safety - Particular requirements for range
hoods and other cooking fume extractors
Deals with the safety of electric range hoods intended to be installed above household cooking ranges, hobs, and similar cooking
appliances, their rated voltage being not more than 250 V. A modified adoption of IEC 60335-2-31:2002.
Reprinted to incorporate Amendments 1 to 4
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 14 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 4, 2010 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.31:2004
Household and similar electrical appliances - Safety - Particular requirements for massage
appliances
Deals with the safety of electric massage appliances for household and similar purposes, their rated voltage being not more than 250
V for single phase and 480 V for other appliances. Some examples of appliances within the scope of this standard are foot
massagers, hand-held massagers, massage beds, massage chairs, massage pads and massage belts. Identical to and reproduced
from IEC 60335-2-32:2002.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 12 pages
Amendment 1, 2008 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.32:2004
Household and similar electrical appliances - Safety - Particular requirements for motorcompressors
Deals with the safety of sealed (hermetic and semi-hermetic) motor-compressors, and their protection and control systems. It
applies to motor-compressors tested separately, intended for household and similar appliances, by their rated voltage being not
more than 250V for single-phase motor-compressors and 480V for other motor-compressors. Examples of equipment which contain
motor-compressors are: refrigerators, ice makers, air-conditioners, heat pumps, and vending machines. It is to be read in conjunction
with AS/NZS 60335.1. This Standard is technically equivalent to and reproduced from IEC 60335-2-34:2002
Reprinted to incorporate Amendments 1 and 2
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 31 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $28.80+GST (Members), $36.00+GST (Retail)
AS/NZS 60335.2.34:2003
Household and similar electrical appliances - Safety - Particular requirements for electrical
heat pumps, air-conditioners and dehumidifiers
Deals with the safety of electric heat pumps, including sanitary hot water heat pumps, air-conditioners, and dehumidifiers
incorporating motor-compressors and hydronic room fan coils, their maximum rated voltages being not more than 250 V for single
phase appliances and 600 V for all other appliances. Appliances not intended for normal household use but which nevertheless may
be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are
within the scope of this standard. Also applies to electric heat pumps, air conditioners and dehumidifiers containing flammable
refrigerant. Identical to and reproduced from IEC 60335-2-40 Ed. 4.2:2006.
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 71 pages
AS/NZS 60335.2.40:2006
Household and similar electrical appliances - Safety - Particular requirements for pumps
AS/NZS 60335.2.41:2004
Deals with the safety of electric pumps for liquids having a temperature not exceeding 90 degrees C, with a rated voltage of not more
than 250 V for single-phase and 480 V for other appliances. Examples of appliances within the scope of this standard are aquarium
pumps; pumps for garden ponds; sludge pumps; submersible pumps; table fountain pumps; vertical wet pit pumps. Pumps
incorporated in appliances are not covered by this standard unless a specific reference is made. A modified adoption of IEC 603352-41:2004.
Reprinted to incorporate Amendment 1:2010
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 17 pages
Amendment 1, 2010 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Particular requirements for clothes
dryers and towel rails
Deals with the safety of electric clothes dryers for drying textiles on racks located in a warm airflow and to electric towel rails, for
household and similar purposes, their rated voltage being not more than 250 V. The clothes racks may be fixed or free-standing in a
cabinet. The air circulation may be natural or forced. This standard does not apply to tumble dryers (refer to AS/NZS 60335.2.11 for
tumble dryers). Reproduced with modifications from IEC 60335-2-43:2002.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 16 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.43:2005
Household and similar electrical appliances - Safety - Particular requirements for ironers
AS/NZS 60335.2.44:2006
Deals with the safety of electric ironers for household and similar purposes, their rated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be
a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are
within the scope of this standard. Examples of appliances within the scope of this standard are ironing presses for one-person
operation; mangles; rotary ironers for one-person operation; trouser presses. Identical to and reproduced from IEC 60335-2-44 Ed.
3:2003.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 23 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Particular requirements for portable
heating tools and similar appliances
Deals with the safety of portable electric heating tools and similar appliances, their rated voltage being not more than 250 V.
Examples of appliances that are within the scope of this standard are branding tools; burning-in pens; conduit-soldering tools;
dehorning tools; de-soldering irons; firelighters; glue guns; heat guns; paint strippers; plastic-cutting tools; soldering guns; soldering
irons; stripping pliers and thermoplastic conduit-welding tools. Identical to and reproduced from IEC 60335-2-45:2002.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.45:2004
AS/NZS 60335.2.51:2006
Household and similar electrical appliances - Safety - Particular requirements for oral
hygiene appliances
Deals with the safety of electric oral hygiene appliances for household and similar purposes, their rated voltage being not more than
250 V. Examples of appliances covered by this standard are oral irrigators; toothbrushes. Does not apply to appliances for medical
purposes. Identical to and reproduced from IEC 60335-2-52 Ed. 3:2005.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 15 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.52:2006
Household and similar electrical appliances - Safety - Particular requirements for sauna
heating appliances
Deals with the safety of electric sauna heating appliances having a rated power input not exceeding 20 kW, their rated voltage being
not more than 250 V for single-phase and 480 V for other appliances. Sauna heating appliances may be of the thermal storage type.
Does not apply to appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive
or explosive atmosphere (dust, vapor or gas); appliances intended to cause perspiration to only one part of the human body;
sweating baths where the head of the user remains outside the heated space; tents and other collapsible sauna baths.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 23 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.53:2006
AS/NZS 60335.2.53:2011 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.53: Particular
requirements for sauna heating appliances and infrared cabins
Deals with the safety of electric sauna heating appliances and infrared emitting units having a rated power input not exceeding 20
kW, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Identical to, but does
not contain the text of, IEC 60335-2-53 Ed 4.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
AS/NZS 60335.2.53:2011 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.53: Particular
requirements for sauna heating appliances and infrared cabins
Deals with the safety of electric sauna heating appliances and infrared emitting units having a rated power input not exceeding 20
kW, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Identical to, and
includes the text of, IEC 60335-2-53 Ed 4.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 35 pages
Household and similar electrical appliances - Safety - Particular requirements for surfacecleaning appliances for household use employing liquids or steam
Deals with the safety of electric cleaning appliances for household use that are intended for cleaning surfaces such as windows,
walls, and empty swimming pools by use of liquid cleansing agents or steam. Applicable to appliances with rated voltage of not more
than 250 V. The appliance may incorporate heating elements or means for pressurizing the liquid container. Identical to and
reproduced from IEC 60335-2-54:2002.
Will supersede AS/NZS 3350.2.54:1997 on 17 June 2012; Will be superseded by AS/NZS 60335.2.54:2010 on 31 May 2013 but
remains current until then; Reprinted to incorporate Amendment 1 :2007
Joint Australian/New Zealand Standard
AS/NZS 60335.2.54:2005
AS/NZS 60335.2.54:2010 (Includes IEC text) Household and similar electrical appliances - Safety - Particular requirements
for surface cleaning appliances for household use employing liquids or steam
Includes IEC 60335-2-54 Ed.4 and provides manufacturers, designers, regulatory authorities, testing laboratories and similar
organizations with safety requirements designed to give the user protection against hazards that might occur during normal operation
and abnormal operation of the appliance and which may be used as the basis for approval for sale or for connection to the electricity
supply mains in Australia and New Zealand. Reproduced from and identical to the fourth edition of IEC 60335-2-54.
Reprinted to incorporate Amendment 1:2010
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 27 pages
Amendment 1, 2010 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Particular requirements for electrical
appliances for use with aquariums and garden ponds
Deals with the safety of electric appliances for use with aquariums and garden ponds for household and similar purposes, their rated
voltage being not more than 250 V. Examples of appliances within the scope of this standard are aerators; aquarium heaters;
automatic food dispensers; sludge-suction appliances. A modified adoption of IEC 60335-2-55:2002.
Reprinted to incorporate Amendments 1, 2 and 3; Will be superseded by AS/NZS 60335.2.55:2011 on 29 July 2013. During the
interim period either AS/NZS 3350.2.55:1998, AS/NZS 60335.2.55:2004 or AS/NZS 60335.2.55:2011 may be used for regulatory
purposes in both Australia and New Zealand. However, for regulatory purposes in both Australia and New Zealand AS/NZS
60335.2.109 applies for water sterilizers containing fluorescent UV lamps that are used in aquariums and garden ponds but AS/NZS
60335.2.55:2004 may also be used for these appliances up to the date of its withdrawal.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 15 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2011 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.55:2004
Household and similar electrical appliances - Safety - Part 2.55: Particular requirements for
electrical appliances for use with aquariums and garden ponds
Deals with the safety of electric appliances for use with aquariums and garden ponds for household and similar purposes, their rated
voltage being not more than 250 V. Adopted from IEC 60335-2-55 Ed 3.1 with national modifications.
Will supersede AS/NZS 3350.2.55:1998 on 15 October 2011 and AS/NZS 60335.2.55:2004 on 29 July 2013. During the interim
period either AS/NZS 3350.2.55:1998, AS/NZS 60335.2.55:2004 or AS/NZS 60335.2.55:2011 may be used for regulatory purposes
in both Australia and New Zealand. However, for regulatory purposes in both Australia and New Zealand AS/NZS 60335.2.109
applies for water sterilizers containing fluorescent UV lamps that are used in aquariums and garden ponds, although AS/NZS
60335.2.55:2004 may also be used for these appliances up to the date of its withdrawal.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 19 pages
AS/NZS 60335.2.55:2011
projectors; micrographic office equipment ; motion picture projectors for films having a width exceeding 16 mm; appliances intended
to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour
or gas); appliances for medical purposes. Identical to and reproduced from IEC 60335-2-56 Ed. 3:2002.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 19 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Particular requirements for insect
killers
Deals with the safety of electric insect killers, their rated voltage being not more than 250 V, for household and similar purposes.
Reproduced with modifications from IEC 60335-2-59:2002.
Will supersede AS/NZS 3350.2.59:1999 on 17 June 2012; Reprinted to incorporate Amendments 1 to 3
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 21 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2010 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.59:2005
Household and similar electrical appliances - Safety - Particular requirements for whirlpool
baths and whirlpool spas
Deals with the safety of electric whirlpool baths for indoor use and whirlpool spas, for household and similar purposes, their rated
voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Also applies to appliances for
circulating air or water in conventional baths. Appliances not intended for normal household use but that nevertheless may be a
source of danger to the public, such as appliances intended to be used by laymen in hotels, fitness centres and similar places, are
within the scope of this standard. Based on IEC 60335-2-60 Ed. 3.1:2005 with national modifications.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 23 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.60:2006
Household and similar electrical appliances - Safety - Particular requirements for thermalstorage room heaters
Deals with the safety of electric thermal-storage room heaters for household and similar purposes that are intended to heat the room
in which they are located, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.
Reproduced with modifications from IEC 60335-2-61:2002.
Will supersede AS/NZS 3350.2.61:2001 on 17 June 2012; Reprinted to incorporate Amendment 1:2005 and Amendment 2:2009
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 26 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.61:2005
Household and similar electrical appliances - Safety - Particular requirements for aircleaning appliances
Deals with the safety of electric air-cleaning appliances for household and similar purposes, their rated voltage being not more than
250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but that
nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry
and on farms, are within the scope of this standard. Does not apply to appliances intended exclusively for industrial purposes;
appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive
atmosphere (dust, vapour or gas); air-cleaning systems incorporated in the building structure. Identical to and reproduced from IEC
60335-2-65 Ed. 2:2005.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 19 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.65:2006
AS/NZS 60335.2.66:2004
Household and similar electrical appliances - Safety - Particular requirements for water-bed
heaters
Deals with the safety of electric water-bed heaters and associated control units, their rated voltage being not more than 250 V, for
household and similar purposes. Appliances intended to be used in hotels, are also within the scope of this standard. Identical to
and reproduced from IEC 60335-2-66:2003.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 18 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Particular requirements for floor
treatment and floor cleaning machines, for industrial and commercial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-67:2002.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 21 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.67:2002
Household and similar electrical appliances - Safety - Particular requirements for spray
extraction appliances, for industrial and commercial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-68:2002.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2007
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 24 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.68:2003
Household and similar electrical appliances - Safety - Particular requirements for wet and
dry vacuum cleaners, including power brush, for industrial and commercial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-69:2002.
Reprinted to incorporate Amendment 1:2005, Amendment 2:2008 and Amendment 3:2010
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 63 pages
Amendment 1, 2005 $56.80+GST (Members), $71.00+GST (Retail)
Amendment 2, 2008 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2010 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.69:2003
Household and similar electrical appliances - Safety - Particular requirements for milking
machines
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-70:2002.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 19 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.70:2002
Household and similar electrical appliances - Safety - Particular requirements for electrical
heating appliances for breeding and rearing animals
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-71:2002.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 19 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.71:2002
AS/NZS 60335.2.72:2003
Household and similar electrical appliances - Safety - Particular requirements for automatic
machines for floor treatment for commercial and industrial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is identical to and reproduced from IEC 60335-2-72:2002.
Reprinted to incorporate Amendment 1:2006
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 28 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Particular requirements for fixed
immersion heaters
Deals with the safety of fixed electric immersion heaters for household and similar purposes that are intended for installation in a
water tank for heating water to a temperature below its boiling point. The rated voltage is not more than 250 V for single-phase
appliances and 480 V for other appliances. Identical to and reproduced from IEC 60335-2-73:2002.
Will supersede AS/NZS 3350.2.73:1996 on 17 June 2012; Reprinted to incorporate Amendment 1:2006 and Amendment 2:2010
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 15 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2010 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.73:2005
Household and similar electrical appliances - Safety - Particular requirements for portable
immersion heaters
Deals with the safety of portable electric immersion heaters, their rated voltage being not more than 250 V, for household and similar
purposes. Also includes appliances intended for use by laymen in shops, in light industry and on farms. Identical to and reproduced
from IEC 60335-2-74:2002.
Will supersede AS/NZS 3350.2.74:2001 on 17 June 2012; Reprinted to incorporate Amendment 1:2007 and Amendment 2:2010
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 15 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2010 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.74:2005
Household and similar electrical appliances - Safety - Particular requirements for electric
fence energizers
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-76:2002.
Reprinted to incorporate Amendment 1:2006 and Amendment 2:2011
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 46 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2011 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.76:2003
AS/NZS 60335.2.78:2005
Household and similar electrical appliances - Safety - Particular requirements for outdoor
barbecues
Deals with the safety of electric outdoor barbecues for household and similar use, their rated voltage being not more than 250 V.
Does not apply to barbecues for indoor use, appliances intended to burn charcoal or similar combustible fuels, appliances intended
exclusively for industrial purposes, or appliances intended to be used in locations where special conditions prevail, such as the
presence of a corrosive or explosive atmosphere (dust, vapor or gas). Identical to and reproduced from IEC 60335-2-78:2002.
Will supersede AS/NZS 3350.2.78:1996 on 17 June 2012; Reprinted to incorporate Amendment 1:2006 and Amendment 2:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 15 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Particular requirements for high
pressure cleaners and steam cleaners, for industrial and commercial use
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-79:2002.
Reprinted to incorporate Amendment 1:2005 and Amendment 2:2008
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 30 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2008 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.79:2002
Household and similar electrical appliances - Safety - Particular requirements for fans
AS/NZS 60335.2.80:2004
Deals with the safety of electric fans, their rated voltage being not more that 250V for single-phase and 480V for other appliances,
intended for household and similar purposes. Appliances intended for use in shops, light industry and on farms, are within the scope
of this standard. A modified adoption of IEC 60335-2-80:2004.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 15 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Particular requirements for foot
warmers and heating mats
Deals with the safety of electric foot warmers and heating mats for household and similar purposes, the rated voltage being not more
than 250 V. Appliances intended to be used by the layman in shops, in light industry and on farms are within the scope of this
standard.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 27 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.81:2006
Household and similar electrical appliances - Safety - Particular requirements for heated
gullies for roof drainage
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-83:2001.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 14 pages
AS/NZS 60335.2.83:2002
AS/NZS 60335.2.85:2005
Household and similar electrical appliances - Safety - Particular requirements for electric
animal-stunning equipment
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-87:2002.
Reprinted to incorporate Amendment 1:2007
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 23 pages
Amendment 1, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.87:2002
accordance with the manufacturers instructions (split system). Examples of appliances that are within the scope of this standard are:
refrigerated display and storage cabinets; refrigerated trolley cabinets; service counters and self-service counters; blast chillers and
blast freezers.
Supersedes AS/NZS 60335.2.89:2002 on 29 October 2013
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 11 pages
AS/NZS 60335.2.89:2010 (Includes IEC text) Household and similar electrical appliances - Safety - Particular requirements
for commercial refrigerating appliances with an incorporated or remote refrigerant
condensing unit or compressor
Includes the text of IEC 60335.2.89 Ed.2. It specifies safety requirements for electrically operated commercial refrigerating
appliances that have an incorporated compressor or that are supplied in two units for assembly as a single appliance in accordance
with the manufacturers instructions (split system). Examples of appliances that are within the scope of this standard are: refrigerated
display and storage cabinets; refrigerated trolley cabinets; service counters and self-service counters; blast chillers and blast
freezers. Adopted from IEC 60335-2-89 Ed 2 with national variations.
Supersedes AS/NZS 60335.2.89:2002 on 29 October 2013
Joint Australian/New Zealand Standard
$210.40+GST (Members), $263.00+GST (Retail), 51 pages
Household and similar electrical appliances - Safety - Particular requirements for
commercial microwave ovens
Deals with the safety of microwave ovens with a cavity door intended for commercial use, their rated voltage being not more than
250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances; the safety of
combination microwave ovens with a cavity door, the requirements for which are contained in Annex AA; the safety of microwave
ovens without a cavity door and with transportation means that are intended for commercial use only, for the heating of food and
beverages, the requirements for which are contained in Annex BB. Changes in this edition concern requirements for microwave
ovens without a cavity door and with transportation means that are intended for commercial use only for the heating of food and
beverages.
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 55 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.90:2006
Household and similar electrical appliances - Safety - Particular requirements for walkbehind and hand-held lawn trimmers and lawn edge trimmers
Deals with the safety of electric powered walk-behind and hand-held lawn trimmers and lawn edge trimmers, with cutting element(s)
of non metallic filament line or freely pivoting non metallic cutter(s), with a kinetic energy of not more than 10 J each, used by a
standing operator for cutting grass, their rated voltage being not more than 250 V for a.c. or 50 V d.c. In this standard, hand-held
and walk-behind lawn trimmers and lawn edge trimmers are referred to collectively as trimmer(s). This standard also deals with the
safety of lawn edge trimmers with rigid cutting means. Additional requirements for these appliances are given in Annex YY.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$90.40+GST (Members), $113.00+GST (Retail), 55 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.91:2008
Household and similar electrical appliances - Safety - Particular requirements for scissors
type grass shears
Deals with the safety of electric powered hand-held scissors type grass shears with a maximum cutting width of 200 mm designed
primarily for cutting grass, their rated voltage being not more than 250 V for a.c. or 50 V d.c. The term "grass shear" within this
standard means "electric powered scissors type grass shear".
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 51 pages
AS/NZS 60335.2.94:2008
Household and similar electrical appliances - Safety - Particular requirements for drives for
vertically moving garage doors for residential use
Deals with the safety of electric drives for garage doors for residential use that open and close in a vertical direction, the rated
voltage of the drives being not more than 250 V for single-phase and 480 V for other appliances. The hazards associated with the
movement of these electrically driven garage doors are included. Reproduced from and identical to IEC 60335-2-95:2005.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 27 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.95:2005
Household and similar electrical appliances - Safety - Particular requirements for flexible
sheet heating elements for room heating
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-96:2002.
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 39 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.96:2002
Household and similar electrical appliances - Safety - Particular requirements for drives for
rolling shutters, awnings, blinds and similar equipment
Deals with the safety of electric drives for rolling equipment such as shutters, blinds and awnings, intended for household and similar
purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Drives for
equipment with a spring-controlled driven part, such as a folding arm awning, are also within the scope of this standard. Identical to
IEC 60335-2-97:2005.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 21 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.97:2007
AS/NZS 60335.2.98:2005
Household and similar electrical appliances - Safety - Particular requirements for handheld mains-operated garden blowers, vacuums and blower vacuums
Specifies particular safety requirements for approval and test purposes. It is to be read in conjunction with AS/NZS 60335.1. This
Standard is technically equivalent to and reproduced from IEC 60335-2-100-2002.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 18 pages
AS/NZS 60335.2.100:2003
AS/NZS 60335.2.102:2004
Household and similar electrical appliances - Safety - Particular requirements for gas, oil
and solid-fuel burning appliances with electrical connections
Deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes,
their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. The electrical safety and
some other safety aspects of these appliances are also covered. All safety aspects are covered when the appliance also complies
with the relevant standard for the fuel-burning appliance. If the appliance incorporates electric-heating sources, it also has to comply
with the relevant Part 2 of IEC 60335. Examples of appliances within the scope of this standard are: central heating boilers;
commercial catering equipment; cooking appliances; laundry and cleaning appliances; room heaters; warm air heaters; water
heaters. A modified adoption of IEC 60335.2.102:2004.
Reprinted to incorporate Amendments 1 & 2
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 17 pages
Amendment 1, 2008 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Household and similar electrical appliances - Safety - Particular requirements for drives for
gates, doors and windows
Deals with the safety of electric drives for horizontally and vertically moving gates, doors and windows for household and similar
purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers
the hazards associated with the movement of the driven part. Identical to IEC 60335-2-103 Ed 2.0.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 31 pages
AS/NZS 60335.2.103:2007
AS/NZS 60335.2.103:2011 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.103: Particular
requirements for drives for gates, doors and windows
Deals with the safety of electric drives for horizontally and vertically moving gates, doors and windows for household and similar
purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers
the hazards associated with the movement of the driven part. Identical to, but does not contain the text of, IEC 60335-2-103 Ed 2.1.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
AS/NZS 60335.2.103:2011 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.103: Particular
requirements for drives for gates, doors and windows
Deals with the safety of electric drives for horizontally and vertically moving gates, doors and windows for household and similar
purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers
the hazards associated with the movement of the driven part. Identical to, and includes the text of, IEC 60335-2-103 Ed 2.1.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 35 pages
Household and similar electrical appliances - Safety - Particular requirements for
multifunctional shower cabinets
Deals with the safety of electric multifunctional shower cabinets for household and similar purposes, their rated voltage being not
more than 250 V for single-phase appliances and 480 V for other appliances. This standard however, in general, does not take into
account the use of appliances by young children or infirm persons without supervision, or playing with the appliance by young
children.
Reprinted to incorporate Amendment 1:2008
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 23 pages
Amendment 1, 2008 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60335.2.105:2006
Deals with the safety of electrolysers that produce low viscosity, ionized liquids intended for use as detergent free wash water in
appliances for household and similar purposes and which conform with the standards applicable to such appliances. It applies to
electrolysers tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage
being not more than 250 V. Reproduced from IEC 60335-2-108 Ed.1.0 with national modifications.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 23 pages
AS/NZS 60335.2.109:2011 (Excludes IEC text) Household and similar electrical appliances - Safety - Part 2.109: Particular
requirements for UV radiation water treatment
This Standard is the formal adopting document of IEC 60335-2-109 Ed 1 which has been adopted without national variation. The IEC
text, which is not included, deals with the safety of UV radiation water treatment appliances for household and similar purposes, their
rated voltage being not more than 250 V.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
AS/NZS 60335.2.109:2011 (Includes IEC text) Household and similar electrical appliances - Safety - Part 2.109: Particular
requirements for UV radiation water treatment
Adopted from and includes, without national variation, IEC 60335-2-109 Ed 1. Deals with the safety of UV radiation water treatment
appliances for household and similar purposes, their rated voltage being not more than 250 V.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 23 pages
Incandescent lamps - Safety specifications - Tungsten filament lamps for domestic and
similar general lighting purposes
Specifies safety requirements for tungsten filament incandescent lamps for general lighting service. Identical to and reproduced from
IEC 60432-1 Ed. 2.1 (2005).
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 48 pages
AS/NZS 60432.1:2007
Effects of current on human beings and livestock - Effects of currents passing through the
body of livestock
Provides basic guidance on the general aspects of the effects of electrical currents on livestock for the establishment of electrical
safety requirements. This Standard has been reproduced from and is technically identical with IEC 60479-3:1998.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 10 pages
Effects of current on human beings and livestock - Effects of lightning strokes on human
beings and livestock
Summarises the basic parameters for lightning and its variability insofar as they apply to human beings and livestock. The possible
direct and indirect interactions of strikes with bodies of living beings are indicated. The resulting effects caused by lightning currents
for the organism are described.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
AS/NZS 60479.4:2010
AS/NZS 60598.2.6:1998
Luminaires - Particular requirements - Luminaires for use in clinical areas of hospitals and
health care buildings
Specifies requirements for luminaires for use with tungsten filament, fluorescent and other discharge lamps on supply voltages not
exceeding 1 000 V for use in clinical areas in which medical treatment, examination and medical care takes place in hospitals and
health care buildings. This standard does not apply to medical electrical equipment, as defined in Clause 2.2.15 of IEC 60601-1
AS/NZS 3200.1, containing a light source. This standard does not apply to luminaires for emergency lighting and luminaires for
general illumination in non-clinical areas (e.g. offices). For these luminaire types, reference should be made to other sections of IEC
60598-2 AS/NZS 60598.2. This standard does not apply to luminaires or parts of luminaires which are designed to be sterilized by
the autoclave process and luminaires for operating tables.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 60598.2.25:2001
Boxes and enclosures for electrical accessories for household and similar fixed electrical
installations - Part 1: General requirements
Provides the Australian and New Zealand electrical industry, including manufacturers, regulators, test laboratories and certification
bodies, with requirements for boxes, enclosures and parts of enclosures for electrical accessories with a rated voltage not exceeding
1 000 V a.c. and 1 500 V d.c., intended for household or similar fixed electrical installations, either indoors or outdoors. Identical to
and reproduced from IEC 60670-1, Ed. 1.1 (2002).
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 76 pages
Boxes and enclosures for electrical accessories for household and similar fixed electrical
installations - Part 21: Particular requirements for boxes and enclosures with provision for
suspension means
Provides the Australian and New Zealand electrical industry, including manufacturers, regulators, test laboratories and certification
bodies, with requirements for boxes and enclosures for electrical accessories for household and similar fixed electrical installations,
with particular requirements for boxes and enclosures with provision for suspension means. Identical to and reproduced from IEC
60670-21, Ed.1.0 (2004).
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
Boxes and enclosures for electrical accessories for household and similar fixed electrical
installations - Part 22: Particular requirements for connecting boxes and enclosures
Provides the Australian and New Zealand electrical industry, including manufacturers, regulators, test laboratories and certification
bodies, with requirements for boxes and enclosures for electrical accessories for household and similar fixed electrical installations,
with particular application to connecting boxes for junction(s) and/or tappings. Identical to and reproduced from IEC 60670-22, Ed.1.0
(2003).
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 20 pages
Boxes and enclosures for electrical accessories for household and similar fixed electrical
installations - Part 23: Particular requirements for floor boxes and enclosures
Provides the Australian and New Zealand electrical industry, including manufacturers, regulators, test laboratories and certification
bodies, with requirements for boxes and enclosures for electrical accessories intended to be installed in any kind of floor, and to
protect accessories against load up to and including 1000 N. Identical to and reproduced from IEC 60670-23, Ed.1.0 (2006).
AS/NZS IEC 60670.23:2012
AS/NZS 60695.1.1:2001
Fire hazard testing - Glowing/hot wire based test methods - Glow-wire apparatus and
common test procedure
Specifies a glow-wire test to simulate the effect of thermal stresses which may be produced by heat sources such as glowing
elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. Technically
equivalent to and reproduced from IEC 60695-2-10:2000.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 11 pages
AS/NZS 60695.2.10:2001
Fire hazard testing - Glowing/hot wire based test methods - Glow-wire flammability test
method for end products
Specifies the details of the glow-wire test when applied to end-products such as electrotechnical equipment, its subassemblies, and
components for fire hazard testing. Technically equivalent to and reproduced from IEC 60695-2-11:2000.
Reprinted to incorporate Amendment 1:2001
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 7 pages
Amendment 1, 2001 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60695.2.11:2001
Fire hazard testing - Glowing/hot wire based test methods - Glow-wire flammability test
method for materials
Specifies the details of the glow-wire test when applied to specimens of solid insulating materials or other solid combustible materials
for flammability testing. Technically equivalent to and reproduced from IEC 60695-2-12:2000.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 60695.2.12:2001
Fire hazard testing - Glowing/hot wire based test methods - Glow-wire ignitability test
method for materials
Specifies the details of the glow-wire test when applied to specimens of solid insulating materials or other solid combustible materials
for ignitability testing. Identical to and reproduced from IEC 60695-2-13:2000.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 4 pages
AS/NZS 60695.2.13:2001
Fire hazard testing - Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory
test arrangement and guidance
Gives the detailed requirements for the production of a 1 kW nominal, propane based pre-mixed type test flame. It is applicable to
electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible
materials. Has the status of a basic safety publication in accordance with IEC Guide 104. Identical to and reproduced from IEC
60695.11.2:2003.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 20 pages
AS/NZS 60695.11.2:2004
Fire hazard testing - Test flames - 500 W flames - Apparatus and confirmational test
methods
Gives the detailed requirements for the production of a nominal 500 W, pre-mixed type test flame. The approximate overall height is
125 mm. Four methods are given: flames A and D may only be produced using methane, flame B may only be produced using
propane and flame C may be produced using either methane or propane. Has the status of a basic safety publication in accordance
with IEC Guide 104. Identical to and reproduced from IEC/TS 60695-11-3:2004 including Amendment 1.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 31 pages
AS/NZS 60695.11.3:2004
Fire hazard testing - Test flames - 50 W flames - Apparatus and confirmational test
methods
Provides detailed requirements for the production of a 50 W nominal, pre-mixed type test flame, with an overall height of
approximately 20 mm. Three methods, A,B and C, are given: flame A is produced by methane; flames B and C are capable of being
produced with either methane or propane. Has the status of a Basic Safety Publication in accordance with IEC Guide 104. Identical
to and reproduced from IEC/TS 60695-11-4:2004 including Amendment 1.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 23 pages
AS/NZS 60695.11.4:2004
Fire hazard testing - Test flames - Needle-flame test method - Apparatus, conformity test
arrangement and guidance
Specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess by a
simulation technique the fire hazard. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid
electrical insulating materials or other combustible materials. Reproduced from and identical to IEC 60695-11-5:2004.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
AS/NZS 60695.11.5:2005
Fire hazard testing - Test flames - 50 W horizontal and vertical flame test methods
AS/NZS 60695.11.10:2001
Procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other
non-metallic materials, exposed to a small-flame ignition source of 50 W nominal power. Identical to and reproduced from IEC
60695-11-10:1999.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 20 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
Fire hazard testing - Test flames - 500 W flame test methods
AS/NZS 60695.11.20:2001
Procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other
non-metallic materials, as well as their resistance to burn-through when exposed to a flame ignition source of 500 W nominal power.
Identical to and reproduced from IEC 60695-11-20:1999.
Reprinted to incorporate Amendment 1:2004
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 15 pages
Amendment 1, 2004 $33.60+GST (Members), $42.00+GST (Retail)
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Cables
Specifies the requirements for mineral-insulated metal sheathed (MIMS) cables with copper conductors and sheaths, intended for
use in electrical installations at working voltages of 500 V and 750 V. Identical to and reproduced from IEC 60702-1:2002.
AS/NZS 60702.1:2005
Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - General requirements
Defines the methods of determination of airborne acoustical noise emitted by household and similar electrical appliances supplied
from mains or from batteries. Identical to IEC 60704-1, Ed. 2.0(1997).
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 36 pages
AS/NZS 60704.1:2009
Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - Particular requirements for dishwashers
Defines the methods of determination of airborne acoustical noise emitted by dishwashers. Applies to single-unit electric
dishwashers for household and similar use, with or without automatic program control, for cold and/or hot water supply, for
detachable or permanent connection to water supply or sewage systems, intended for placing on the floor against a wall, for buildingin or placing under a counter, a kitchen worktop or under a sink, for wall-mounting or on a counter.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 16 pages
AS/NZS 60704.2.3:2009
Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - Particular requirements for washing machines and spin extractors
Defines the methods of determination of airborne acoustical noise emitted by washing machines. This Standard applies to single unit
electric washing machines, the washing and spinning function of combined appliances for household and similar use, and to spin
extractors.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 16 pages
AS/NZS 60704.2.4:2009
Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - Particular requirements for tumble dryers
Defines the methods of determination of airborne acoustical noise emitted by tumble dryers. This Standard applies to single unit
electric tumble dryers for household and similar use intended for placing on the floor against a wall, for building in or placing under a
counter, a kitchen work-top or under a sink, for wall-mounting or for mounting on a counter. For the purpose of this standard, washerdryer combinations, when operated as a dryer, are considered as a tumble dryer.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 20 pages
AS/NZS 60704.2.6:2009
Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - Procedure for determining and verifying declared noise emission values
Describes the procedures for determining and verifying the declared values of the noise emitted by household and similar
appliances. Applies to all categories of household and similar electrical appliances covered by AS/NZS 60704.1 and AS/NZS
60704.2.3, AS/NZS 60704.2.4, AS/NZS 60704.2.6 and the other Standards in IEC 60704-2 series dealing with particular
requirements for special categories of appliances.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 24 pages
AS/NZS 60704.3:2009
AS/NZS 60745.2.3:2006
Hand-held motor-operated electric tools - Safety - Part 2.3: Particular requirements for
grinders, polishers and disk-type sanders
Reproduced from IEC 60745-2-3 Ed 2.1 with national modifications. Applies to grinders, polishers and disk-type sanders, including
angle, straight and vertical tools, with a rated capacity not exceeding 230 mm. For grinders, the rated speed does not exceed a
peripheral speed of the accessory of 80 m/s at rated capacity. Does not apply to dedicated cut-off machines which are covered by
IEC 60745-2-22.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 43 pages
AS/NZS 60745.2.3:2011
AS/NZS 60745.2.5:2007
AS/NZS 60745.2.5:2011 (Excludes IEC text) Hand-held motor-operated electric tools - Safety - Part 2.5: Particular
requirements for circular saws
This Standard is the formal adopting document of IEC 60745-2-5 Ed 5 which has been adopted without national variation. The IEC
text, which is not included, applies to circular saws, but not to saws designed for use with abrasive wheels, which are covered by IEC
60745-2-22.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
Hand-held motor-operated electric tools - Safety - Part 2.5: Particular
AS/NZS 60745.2.5:2011 (Includes IEC text)
requirements for circular saws
Adopted from and includes, without national variation, IEC 60745-2-5 Ed 5, and applies to circular saws. Does not apply to saws
designed for use with abrasive wheels, which are covered by IEC 60745-2-22.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 55 pages
Hand-held motor-operated electrical tools - Safety - Particular requirements for hammers
AS/NZS 60745.2.6:2009
Applies to hammers. Tools covered by this standard include but are not limited to percussion and rotary hammers. Adopted from IEC
60745-2-6 Ed 2.2 with national modifications.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 23 pages
Hand-held motor-operated electrical tools - Safety - Particular requirements for shears and
nibblers
Applies to shears and nibblers. Adopted from IEC 60745-2-8 Ed 2.1 with national modifications.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 19 pages
AS/NZS 60745.2.8:2009
AS/NZS 60745.2.12:2009
Hand-held motor-operated electrical tools - Safety - Particular requirements for chain saws
AS/NZS 60745.2.13:2010
Provides manufacturers, designers, regulatory authorities, testing laboratories and similar organizations with safety requirements
designed to give the user protection against hazards that might occur during normal operation and abnormal operation of the tool
and which may be used as the basis for approval for sale or for connection to the electricity supply mains in Australia and New
Zealand. Identical to and reproduced from the full text of the second edition of IEC 60745-2-13.
Reprinted to incorporate Amendment 1:2011
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 35 pages
Amendment 1, 2011 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 60745.2.14:2003
Hand-held motor-operated electrical tools - Safety - Particular requirements for planers
Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for threephase a.c. tools. It is to be read in conjunction with AS/NZS 60745.1. This Standard is technically equivalent to and reproduced
from IEC 60745-2-14:2003.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 13 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Hand-held motor-operated electric tools - Safety - Part 2.14: Particular requirements for
planers
Identical to and reproduced from IEC 60745-2-14:2003 Ed 2.2. Applies to electric planers.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 23 pages
AS/NZS 60745.2.14:2011
AS/NZS 60745.2.15:2006
AS/NZS 60745.2.17:2011 (Excludes IEC text) Hand-held motor-operated electric tools - Safety - Part 2.17: Particular
requirements for routers and trimmers
This Standard is the formal adopting document of IEC 60745-2-17 Ed 3 which has been adopted without national variation. The IEC
text, which is not included, applies to electric routers and trimmers.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
AS/NZS 60745.2.17:2011 (Includes IEC text) Hand-held motor-operated electric tools - Safety - Part 2.17: Particular
requirements for routers and trimmers
Adopted from and includes, without national variation, IEC 60745-2-17 Ed 3, which applies to electric routers and trimmers.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 35 pages
Hand-held motor-operated electrical tools - Safety - Particular requirements for strapping
tools
Applies to strapping tools. Identical to IEC 60745-2-18 Ed 1.1.
AS/NZS 60745.2.18:2009
AS/NZS 60745.2.19:2011
Hand-held motor-operated electrical tools - Safety - Particular requirements for band saws
AS/NZS 60745.2.20:2009
Applies to band saws. Identical to IEC 60745-2-20 Ed 1.1.
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 19 pages
Hand-held motor-operated electrical tools - Safety - Particular requirements for drain
cleaners
Applies to drain cleaners. Identical to IEC 60745-2-21 Ed 1.1.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 15 pages
AS/NZS 60745.2.21:2009
AS/NZS 60745.2.22:2011 (Excludes IEC text) Hand-held motor-operated electric tools - Safety - Part 2.22: Particular
requirements for cut-off machines
Applies to cut-off machines fitted with one bonded reinforced wheel of Type 41 or Type 42, or one or more diamond cut-off wheels
with the peripheral gaps not exceeding 10 mm. Also applies to cut-off machines with a peripheral speed of the wheel of 100 m/s at
rated capacity and a rated wheel capacity range of 55 mm to 410 mm. These machines are intended to cut materials such as metals,
concrete, masonry, glass and tile. Includes national variations to, but not the text of, IEC 60745-2-22 Ed 1.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
AS/NZS 60745.2.22:2011 (Includes IEC text) Hand-held motor-operated electric tools - Safety - Part 2.22: Particular
requirements for cut-off machines
Applies to cut-off machines fitted with one bonded reinforced wheel of Type 41 or Type 42, or one or more diamond cut-off wheels
with the peripheral gaps not exceeding 10 mm. Also applies to cut-off machines with a peripheral speed of the wheel of 100 m/s at
rated capacity and a rated wheel capacity range of 55 mm to 410 mm. These machines are intended to cut materials such as metals,
concrete, masonry, glass and tile. Includes the text of IEC 60745-2-22 Ed 1, together with national variations.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 31 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Safety of laser products - Part 1: Equipment classification and requirements
AS/NZS IEC 60825.1:2011
The safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. A laser product may consist of a single
laser with or without a separate power supply or may incorporate one or more lasers in a complex optical, electrical, or mechanical
system. Typically, laser products are used for demonstration of physical and optical phenomena, materials processing, data reading
and storage, transmission and display of information, etc. Such systems have found use in industry, business, entertainment,
research, education, medicine and consumer products. Identical to and reproduced from IEC 60825-1, Ed.2.0 (2007).
Joint Australian/New Zealand Standard
$200.00+GST (Members), $250.00+GST (Retail), 108 pages
AS/NZS IEC 60825.2:2011
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
Provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems
(OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance
from the optical source. Identical to and reproduced from IEC 60825-2, Ed.3.2 (2010).
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 56 pages
Safety of laser products - Part 14: A users guide
AS/NZS IEC 60825.14:2011
Provides guidance on best practice in the safe use of laser products that conform to IEC 60825-1. The terms 'laser product' and
'laser equipment' as used in this document also refer to any device, assembly or system, which is capable of emitting optical
radiation produced by a process of stimulated emission. However, unlike IEC 60825-1, this document does not cover light-emitting
diodes (LEDs). Identical to and reproduced from IEC/TR 60825-14, Ed.1.0 (2004).
Joint Australian/New Zealand Standard
$200.00+GST (Members), $250.00+GST (Retail), 100 pages
Power cables with extruded insulation and their accessories for rated voltages above 30
kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
Specifies test methods and requirements for electric cables and their accessories for rated voltages above 30 kV (Um = 36 kV) up to
150 kV (Um = 170 kV) that can be referenced in Australian/New Zealand Standards for polymeric insulated electric cables covering
this voltage range. Identical to and reproduced from IEC 60840:2004.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 60 pages
AS/NZS 60840:2006
AS/NZS 60898.1:2004
AS/NZS 60922:1998
D.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
AS/NZS 60925:2005
Provides the lighting industry with performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps up to
250V. Reproduced from IEC 60925:2001 with national modifications.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
Auxiliaries for lamps - Starting devices (other than glow starters) - Performance
requirements
Specifies performance requirements for starting devices (other than glow starters). Reproduced from IEC 60927:2004 with national
modifications.
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 36 pages
AS/NZS 60927:2005
AS/NZS 60928:2000
A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
AS/NZS 60929:2005
Specifies performance requirements for electronic ballasts for tubular fluorescent lamps for use on a.c. supplies up to 1000V at 50
Hz or 60 Hz. Identical to and reproduced from IEC 60929:2003.
Joint Australian/New Zealand Standard
$188.00+GST (Members), $235.00+GST (Retail), 152 pages
Information technology equipment - Safety - General requirements
AS/NZS 60950.1:2011
Establishes minimum safety requirements for the design, construction and operation of mains-powered or battery-powered
information technology equipment. It sets out requirements intended to ensure the safety of the operator and other people who may
come into contact with the equipment and, where specifically stated, for service personnel and which may be used as the basis for
approval for Australia and New Zealand. Adopted with national modifications from IEC 60950-1, Ed. 2.0 (2005).
Joint Australian/New Zealand Standard
$263.20+GST (Members), $329.00+GST (Retail), 320 pages
Self ballasted lamps for general lighting services - Safety requirements
AS/NZS 60968:2001
Specifies safety and interchangeability requirements along with test methods and conditions for compliance of tubular fluorescent
and other gas discharge lamps. This applies to lamps with built-in means for controlling, starting and stable operation.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 13 pages
Self ballasted lamps for general lighting services - Performance requirements
AS/NZS 60969:2001
Specifies performance requirements for self ballasted lamps for general lighting services. In addition specifies test methods and
conditions of compliances of tubular fluorescent and other gas discharge lamps for domestic and general lighting services.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 7 pages
Methods of measurement of touch current and protective conductor current
AS/NZS 60990:2002
Defines methods for measuring electric currents flowing through the human body or through the protective conductor. This Standard
is identical with, and has been reproduced from, IEC 60990:1999.
Connecting devices for low voltage circuits for household and similar purposes - Particular
requirements for connecting devices as separate entities with screw-type clamping units
Specifies requirements for screw-type clamping units primarily suitable for connecting unprepared conductors for use at low voltage.
It is to be read in conjunction with AS/NZS 60998.1. This Standard is identical with, and reproduced from, IEC 60998-2-1:1990.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
AS/NZS 60998.2.1:1998
Connecting devices for low-voltage circuits for household and similar purposes - Part 2.2:
Particular requirements for connecting devices as separate entities with screwless-type
clamping units
Provides Australian and New Zealand electrical industries with general requirements for connecting devices with screwless-type
clamping units primarily suitable for connecting unprepared conductors. Identical to, and reproduced from, IEC 60998-2-2, Ed.2.0
(2002).
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 28 pages
AS/NZS IEC 60998.2.2:2012
Connecting devices for low-voltage circuits for household and similar purposes - Part 2.3:
Particular requirements for connecting devices as separate entities with insulationpiercing clamping units
Provides Australian and New Zealand electrical industries with general requirements for connecting devices with insulation piercing
clamping units primarily suitable for connecting insulated unprepared conductors. Identical to, and reproduced from, IEC 60998-2-3,
Ed. 2.0 (2002) including Corrigendum 1(2006).
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 28 pages
AS/NZS IEC 60998.2.3:2012
Connecting devices for low-voltage circuits for household and similar purposes - Part 2.4:
Particular requirements for twist-on connecting devices
Provides requirements for Australian and New Zealand electrical industries with general requirements for twist-on connecting
devices. Identical to, and reproduced from, IEC 60998-2-4, Ed. 2.0 (2004).
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 28 pages
integral parts of equipment, for the connection of electrical copper conductors, rigid stranded and/or flexible, having a cross-section
above 35 mm2 and up to and including 300 mm2 and equivalent AWG/kcmil sizes with a rated voltage not exceeding 1000 V a.c. and
a frequency up to and including 1000 Hz and 1500 V d.c. Identical to and reproduuced from IEC 60999-2, Ed 2.0 (2003).
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 24 pages
Electromagnetic compatibility (EMC) - General - Application and interpretation of
fundamental definitions and terms
Specifies the application of fundamental terms contained in the electromagnetic emissions and immunity Standards. This Standard is
identical with and has been reproduced from IEC 61000-1-1:1992.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 26 pages
AS/NZS 61000.1.1:2000
AS/NZS TR IEC 61000.1.4:2012 Electromagnetic compatibility (EMC) - Part 1.4: General - Historical rationale for the
limitation of power-frequency conducted harmonic current emissions from equipment, in
the frequency range up to 2 kHz
Provides the users of electromagnetic emissions Standards with a rationale for the limitation of power-frequency conducted harmonic
current emissions from equipment for frequencies up to 2 kHz on the public electricity supply, in the editions up to and including the
second edition of AS/NZS 61000.3.2:2003, and in the first edition of AS/NZS 61000.3.12:2006. Identical to and reproduced from
IEC/TR 61000-1-4, Ed.1.0 (2005).
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 48 pages
Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low frequency
conducted disturbances and signalling in public
Specifies compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems.
This Standard is identical with and has been reproduced from IEC 61000-2-2:2002.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 33 pages
AS/NZS 61000.2.2:2003
Electromagnetic compatibility (EMC) - Environment - Description of the environment Radiated and non-network-frequency-related conducted phenomena
Describes the electromagnetic environment intended as a basis to achieve electromagnetic compatibility in system and equipment
design, using test standards and mitigation methods which satisfactorily take account of undesirable effects. The Standard is
primarily concerned with characteristics and levels of electromagnetic fields and of non-network-frequency-related conducted
emissions from unintentional sources of interference. It is one of a series of Standards applicable to electromagnetic compatibility.
This Standard is identical with and has been reproduced from IEC 61000-2-3:1992.
Joint Australian/New Zealand Standard
$136.80+GST (Members), $171.00+GST (Retail), 63 pages
AS/NZS 61000.2.3:1999
AS/NZS 61000.2.5:1999
AS/NZS TR IEC 61000.2.6:2012 Electromagnetic compatibility (EMC) - Part 2.6: Environment - Assessment of the emission
levels in the power supply of industrial plants as regards low-frequency conducted
disturbances
Recommends the procedures to assess the disturbance levels (i.e. harmonics and interharmonics, unbalances, voltage changes,
voltage dips) produced by the emission of the devices, equipment and systems installed in non-public networks in industrial
environment as far as the low-frequency conducted disturbances in the power supply are concerned. Identical to and reproduced
from IEC/TR 61000-2-6, Ed.1.0 (1995).
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 64 pages
AS/NZS IEC/TR 61000.2.7:2009 Electromagnetic compatibility (EMC) - Environment - Low frequency magnetic fields in
various environments
Provides users of electromagnetic emissions Standards with reference values on low-frequency magnetic fields produced by some
electrical equipment (particularly video display units) in various environments such as industrial, commercial office, residential and
hospital. Identical to and reproduced from IEC/TR 61000-2-7, Ed. 1.0 (1998).
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 36 pages
AS/NZS IEC/TR 61000.2.8:2009 Electromagnetic compatibility (EMC) - Environment - Voltage dips and short interruptions
on public electric power supply systems with statistical measurement results
Provides the users of electromagnetic emissions Standards with a description of the electromagnetic disturbance phenomena that
can be expected on public electricity supply systems, and their effects on electrical equipment when subjected to voltage dips and
short interruptions. It includes some statistical measurement results as a general reference. Identical to and reproduced from
IEC/TR 61000-2-8, Ed. 1.0 (2002).
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 48 pages
Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency
conducted disturbances and signalling in public medium-voltage power supply systems
Specifies compatibility levels for electromagnetic disturbance phenomena which can be expected in public medium voltage a.c.
distribution systems. This Standard is identical with and has been reproduced from IEC 61000-2-12:2003.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 22 pages
AS/NZS 61000.2.12:2003
AS/NZS IEC/TR 61000.2.14:2009 Electromagnetic compatibility (EMC) - Environment - Overvoltages on public electricity
distribution networks
Provides the users of electromagnetic emissions Standards and the users of electrical and electronic equipment intended for
connection to low and medium-voltage operated electricity supply networks with a description of various phenomena and processes
that cause overvoltages. Identical to and reproduced from IEC/TR 61000-2-14, Ed. 1.0 (2006).
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 48 pages
Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions
(equipment input current less than or equal to 16 A per phase)
To provide manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical
network with limits for voltage disturbances and harmonics produced by that equipment and the methods for ascertaining compliance
to them in order to maintain electromagnetic compatibility within the electrical network. Adopted with modifications from IEC 610003-2, Ed.3.0(2005).
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 32 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 61000.3.2:2007
AS/NZS 61000.3.3:2012
phase, intended to be connected to public low-voltage distribution systems of between 220 V and 250 V line to neutral at 50 Hz, and
not subject to conditional connection. Identical to, and reproduced from, IEC 61000-3-3, Ed.2.0 (2008).
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 32 pages
Electromagnetic compatibility (EMC) - Limits - Limitation of emission of harmonic currents
in low-voltage power supply systems for equipment with rated current greater than 75 A
To provide manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical
network with limits of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater
than 75 A and the methods for ascertaining compliance to them in order to maintain electromagnetic compatibility within the electrical
network. Identical to and reproduced from IEC 61000-3-4, Ed.1.0(1998).
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 20 pages
AS/NZS 61000.3.4:2007
AS/NZS TR IEC 61000.3.6:2012 Electromagnetic compatibility (EMC) - Part 3.6: Limits - Assessment of emission limits for
the connection of distorting installations to MV, HV and EHV power systems
Provides guidance on principles which can be used as the basis for determining the requirements for the connection of distorting
installations to MV, HV and EHV public power systems. Identical to and reproduced from IEC/TR 61000-3-6, Ed.2.0 (2008).
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 64 pages
AS/NZS TR IEC 61000.3.7:2012 Electromagnetic compatibility (EMC) - Part 3.7: Limits - Assessment of emission limits for
the connection of fluctuating installations to MV, HV and EHV power systems
Provides guidance on principles which can be used as the basis for determining the requirements for the connection of fluctuating
installations to MV, HV and EHV public power systems. Identical to and reproduced from IEC TR 61000-3-7, Ed.2.0 (2008).
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 72 pages
Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage
fluctuations and flicker in public low-voltage supply systems - Equipment with rated
current less than or equal to 75 A and subject to conditional connection
Specifies the limits of voltage changes, voltage fluctuations and flicker produced by electrical and electronic equipment having a
rated input current from 16 A up to and including 75 A. This equipment is intended to be connected to public low-voltage distribution
systems having nominal system voltages of between 220 V and 250 V, line-to-neutral at 50 Hz and which is subject to conditional
connection. This Standard is identical with and has been reproduced from IEC 61000-3-11:2000.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 10 pages
AS/NZS 61000.3.11:2002
AS/NZS TR IEC 61000.3.13:2012 Electromagnetic compatibility (EMC) - Part 3.13: Limits - Assessment of emission limits for
the connection of unbalanced installations to MV, HV and EHV power systems
Provides guidance on principles that can be used to determine the requirements for the connection of three-phase installations
causing voltage unbalance to MV, HV and EHV public power systems. Identical to and reproduced from IEC/TR 61000-3-13, Ed 1.0
(2008).
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 44 pages
Electromagnetic compatibility (EMC) - Testing and measurement techniques - Overview of
IEC 61000-4 series
Provides designers, manufacturers, and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances. Identical to and reproduced from IEC 61000-4-1:2000.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 20 pages
AS/NZS 61000.4.1:2006
AS/NZS 61000.4.6:2006
Electromagnetic compatibility (EMC) - Part 4.7: Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation, for
power supply systems and equipment connected thereto
Provides manufacturers and suppliers of electricity and users of electrical equipment intended for connection to an electrical network,
with testing and measurement techniques for instrumentation intended for measuring spectral components for both individual items
of equipment and the actual supply systems, in order to maintain electromagnetic compatibility within the electrical network. Identical
to and reproduced from IEC 61000-4-7, Ed.2.1 (2009).
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 48 pages
AS/NZS 61000.4.7:2012
Electromagnetic compatibility (EMC) - Part 4.8: Testing and measurement techniques Power frequency magnetic field immunity test
Determines the immunity requirements of equipment, only under operational conditions, to magnetic disturbances at power
frequency related to residential and commercial locations, industrial installations and power plants, and medium voltage and high
voltage sub-stations. Identical to and reproduced from IEC 61000-4-8, Ed.2.0 (2009).
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 40 pages
AS/NZS 61000.4.8:2012
Electromagnetic compatibility (EMC) - Part 4.13: Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency
immunity tests
Establishes a common reference for evaluating the functional immunity of electrical and electronic equipment when subjected to
harmonics and interharmonics and mains signalling frequencies. Identical to and reproduced from IEC 61000-4-13, Ed.1.1 (2009).
Joint Australian/New Zealand Standard
$102.40+GST (Members), $128.00+GST (Retail), 36 pages
AS/NZS 61000.4.13:2012
Electromagnetic compatibility (EMC) - Part 4.14: Testing and measurement techniques Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per
phase
Establishes a common reference for evaluating the immunity of electric and electronic equipment when subjected to positive and
negative low amplitude voltage fluctuations. Identical to and reproduced from IEC 61000-4-14, Ed.1.2 (2009).
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 24 pages
AS/NZS 61000.4.14:2012
Electromagnetic compatibility (EMC) - Part 4.15: Testing and measurement techniques Flickermeter - Functional and design specifications
Provides a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level
for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be constructed. A method is
given for the evaluation of flicker severity on the basis of the output of flickermeters complying with this standard. Identical to and
reproduced from IEC 61000-4-15, Ed.2.0 (2010).
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 44 pages
AS/NZS 61000.4.15:2012
Electromagnetic compatibility (EMC) - Part 4.27: Testing and measurement techniques Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
Establishes a reference for evaluating the immunity of electrical and electronic equipment when subjected to unbalanced power
supply voltage. Applies to 50 Hz/60 Hz three-phase powered electrical and/or electronic equipment with rated line current up to 16 A
AS/NZS 61000.4.27:2012
per phase. Does not apply to equipment with three-phase plus neutral connection if that equipment operates as a group of singlephase loads connected between phase and neutral. Identical to, and reproduced from, IEC 61000-4-27, Ed.1.1 (2009).
Joint Australian/New Zealand Standard
$85.60+GST (Members), $107.00+GST (Retail), 24 pages
Electromagnetic compatibility (EMC) - Part 4.30: Testing and measurement techniques Power quality measurement methods
Defines the methods for measurement and interpretation of results for power quality parameters in 50/60 Hz a.c. power supply
systems. Measurement methods are described for each relevant parameter in terms that give reliable and repeatable results,
regardless of the methods implementation. This standard addresses measurement methods for in situ measurements. Identical to
and reproduced from IEC 61000-4-30, Ed.2.0 (2008).
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 68 pages
AS/NZS 61000.4.30:2012
AS/NZS 61000.4.34:2007
Electromagnetic compatibility (EMC) - Part 4.34: Testing and measurements techniques Voltage dips, short interruptions and voltage variations immunity tests for equipment with
mains current more than 16 A per phase
Defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage
power supply networks for voltage dips, short interruptions, and voltage variations. Adopted, with national modifications, from IEC
61000-4-34 Ed.1.1 (2009).
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 40 pages
AS/NZS 61000.4.34:2012
Electromagnetic compatibility (EMC) - Part 6.3: Generic standards - Emission standard for
residential, commercial and light-industrial environments
Provides designers, manufacturers and testers of equipment incorporating electrical or electronic operation with methods of test for
ascertaining immunity to electromagnetic disturbances. Identical to and reproduced from IEC 61000-6-3, Ed.2.1 (2011).
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 28 pages
AS/NZS 61000.6.3:2012
Electromagnetic compatibility (EMC) - Part 6.4: Generic standards - Emission standard for
industrial environments
Specifies EMC emission requirements in the frequency range 0 Hz to 400 GHz for electrical and electronic apparatus intended for
use in industrial environments. This generic EMC emission standard is applicable if no relevant dedicated product or product-family
EMC emission standard exists. It applies to apparatus intended to be connected to a power network supplied from a high or medium
voltage transformer dedicated to the supply of an installation feeding manufacturing or similar plant, and intended to operate in or in
proximity to industrial locations. This standard applies also to apparatus which is battery operated and intended to be used in
industrial locations. Identical to and reproduced from IEC 61000-6-4, Ed.2.1.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 24 pages
AS/NZS 61000.6.4:2012
AS/NZS 61008.1:2011
AS/NZS 61009.1:2011
Auxiliaries for lamps - D.C. or A.C. supplied electronic step-down convertors for filament
lamps - General and safety requirements
Provides the lighting industry with general and safety requirements for electronic step-down convertors for use on D.C. supplies up to
250 V or A.C. supplies up to 1000 V for use with tungsten-halogen or other filament lamps. It also stipulates the particular
requirements for convertors with means of protection against overheating and provides additional requirements for independent
SELV D.C. or A.C. supplied electronic step-down convertors. This Standard is an adoption with national modifications of IEC
61046:1993 including Amendment 1:1995.
Superseded by AS/NZS 61347.2.2:2004 but remains current until 30 December 2006
Joint Australian/New Zealand Standard
$108.80+GST (Members), $136.00+GST (Retail), 45 pages
AS/NZS 61046:2001
Auxiliaries for lamps - D.C. or a.c. supplied electronic step-down convertors for filament
lamps - Performance requirements
Provides the lighting industry with performance requirements at 50 or 60 Hz for electronic step-down convertors for use on D.C.
supplies up to 250 V or a.c. supplies up to 1000 V with tungsten-halogen or other filament lamps.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 12 pages
AS/NZS 61047:2001
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp
circuits - General and safety requirements
Specifies the general and safety requirement for capacitors up to 2.5 kVAR having a rated voltage up to 1000 V intended for
discharge lamp circuits operating at 50/60 Hz. This Standard is reproduced from IEC 61048 and varied for Australian/New Zealand
conditions.
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 30 pages
AS/NZS 61048:2002
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp
circuits - Performance requirements
Specifies performance requirements for capacitors up to 2.5 kVAR rated up to 1000 V a.c. intended for use in discharge lamp circuits
at 50/60 Hz. This Standard is identical with and reproduced from IEC 61049.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 9 pages
AS/NZS 61049:2002
Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000
V (generally called neon-transformers) - General and safety requirements
Specifies general and safety requirements for single-phase transformers with separate input and output windings, for use on an a.c.
supply up to 1000 V at 50/60 Hz and having a no-load output voltage exceeding 1000 V but not exceeding 10 000 V and intended
for the supply of cold cathode lighting for electric advertising signs, light signals and similar purposes.
Joint Australian/New Zealand Standard
$73.60+GST (Members), $92.00+GST (Retail), 34 pages
AS/NZS 61050:1998
AS/NZS 61058.1:2008
Applies to switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or
control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 440 V and a
rated current not exceeding 63 A. Adopted with national modifications from IEC 61058-1, Ed. 3.1 (2000).
Joint Australian/New Zealand Standard
$188.00+GST (Members), $235.00+GST (Retail), 156 pages
Global maritime distress and safety system (GMDSS) - Survival craft portable two-way VHF
radiotelephone apparatus - Operational and performance requirements, methods of testing
and required test results
Specifies the minimum performance requires, technical characteristics and methods of testing, with required test results, of survival
craft portable two way radiotelephone apparatus as required by chapter III of the 1988 amendments to the 1974 International
Convention for the Safety of Life at Sea (SOLAS). Adopted from IEC 61097-12, Ed. 1.0 (1996) with modifications.
Joint Australian/New Zealand Standard
$113.60+GST (Members), $142.00+GST (Retail), 40 pages
AS/NZS 61097.12:2008
Bayonet lampholders
AS/NZS 61184:2007
Provides general and safety requirements for bayonet lampholders used for general purposes. Based on IEC 61184, Ed. 2.0 (1997)
with national modifications.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 64 pages
Connecting devices - Flat quick-connect terminations for electrical copper conductors Safety requirements
Specifies requirements for flat quick-connect terminations consisting of a male tab size 2.8, 4.8, 6.3 or 9.5 mm and mating female
connector for use as either an incorporated or an integrated part of an equipment or of a component, or as a separate entity, for
connecting electrical copper conductors according to the manufacturer's instructions.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 20 pages
AS/NZS 61210:2002
AS/NZS 61241.1.1:1999
AS/NZS 61241.1.2:2000
Electrical apparatus for use in the presence of combustible dust - Test methods - Methods
for determining the minimum ignition temperature of dust
Specifies two test methods for determining the minimum ignition temperatures of dust. This Standard is identical with and has been
reproduced from IEC 61241-2-1:1994.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 25 pages
AS/NZS 61241.2.1:2000
Electrical apparatus for use in the presence of combustible dust - Test methods - Methods
for determining the electrical resistivity of dust in layers
Specifies a test method to determine, by application of a d.c. voltage, the electrical resistivity of a layer of dust. Is to be used in the
design, construction, testing and application of electrical apparatus for use in the presence of combustible dust. This Standard is
identical with and has been reproduced from IEC 61241-2-2:1993.
Joint Australian/New Zealand Standard
$46.40+GST (Members), $58.00+GST (Retail), 4 pages
AS/NZS 61241.2.2:2000
Electrical apparatus for use in the presence of combustible dust - Test methods - Methods
for determining the minimum ignition energy of dust/air mixtures
Specifies a method of test to determine the minimum ignition energy of a dust/air mixture by an electrically generated high-voltage
d.c. spark. This test method is intended to develop data to be used in deciding whether or not combustible dust/air mixtures are
considered to be ignitable with respect to electrical discharge. This Standard is identical with and has been reproduced from IEC
61241-2-3:1994.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 17 pages
AS/NZS 61241.2.3:2000
AS/NZS 61241.3:1999
Electrical apparatus for use in the presence of combustible dust - Type of protection 'pD'
AS/NZS 61241.4:2002
Specifies the requirements for design, construction, testing and marking of electrical apparatus, with type of protection pressurization
'pD', intended for use in combustible dust atmospheres. This Standard is identical with and has been reproduced from IEC 612414:2001.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 19 pages
AS/NZS 61241.10:2005
Electrical apparatus for use in the presence of combustible dust - Intrinsically safe
apparatus iD
Sets out the essential requirements for explosion-protected electrical apparatus for use in dust hazardous areas, when using the
protection technique intrinsic safety 'iD'. Identical to and reproduced from IEC 61241-11:2005.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 20 pages
AS/NZS 61241.11:2006
Electrical apparatus for use in the presence of combustible dust - Selection and
installation
Specifies general requirements, additional to those required for basic electrical safety, for the selection of electrical apparatus and
instruments and associated equipment, and for the installation of electrical apparatus to ensure safe use in areas where combustible
dust may be present in quantities which could lead to a fire or explosion hazard. The application of electrical apparatus in
atmospheres which may contain explosive gas as well as combustible dust, whether simultaneously or separately, requires
additional protective measures. Reproduced with modifications from IEC 61241-14:2004.
Reprinted to incorporate Amendments 1 to 5
Joint Australian/New Zealand Standard
$96.80+GST (Members), $121.00+GST (Retail), 72 pages
Amendment 1, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2005 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 4, 2007 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 5, 2007 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 61241.14:2005
Lamp controlgear - Particular requirements for a.c. supplied electronic ballasts for
fluorescent lamps
Specifies particular safety requirements for electronic ballast associated with fluorescent lamps as specified in AS/NZS 4782.1,
AS/NZS 60901, and other fluorescent lamps for high-frequency operation. Modified adoption of IEC 61347-2-2:2000.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 15 pages
AS/NZS 61347.2.3:2004
Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for general
lighting
Specifies safety requirements for d.c. supplied electronic ballasts for operation from surge-free power sources from batteries without
charging equipment. This Standard is identical to and reproduced from IEC 61347-2-4:2000.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 6 pages
AS/NZS 61347.2.4:2002
Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for public
transport
Specifies electrical safety requirements for road and railway vehicles, tram cars and craft used for public transport. This Standard is
identical to and reproduced from IEC 61347-2-5:2000.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 9 pages
AS/NZS 61347.2.5:2002
Lamp controlgear - Particular requirements for d.c. supplied electronic ballasts for aircraft
lighting
Specifies safety requirements for d.c. supplied electronic ballasts intended for operation from power sources with transients and
surges such as aircraft. This Standard is identical to and reproduced from IEC 61347-2-6:2000.
Joint Australian/New Zealand Standard
AS/NZS 61347.2.6:2002
AS/NZS 61347.2.9:2004
Lamp controlgear - Particular requirements for electronic invertors and convertors for
high-frequency operation of cold start tubular discharge lamps (neon tubes)
Specifies particular safety requirements for electronic invertors and convertors for high-frequency operation of tubular cold-cathode
discharge lamps used in signs and luminous discharge tube installations. Modified adoption of IEC 61347-2-10:2000 including
Amendment 1:2003.
Joint Australian/New Zealand Standard
$68.80+GST (Members), $86.00+GST (Retail), 15 pages
AS/NZS 61347.2.10:2004
Lamp controlgear - Particular requirements for miscellaneous electronic circuits used with
luminaires
Specifies general and safety requirements for miscellaneous electronic circuits used with luminaires for use on a.c. supplies up to
1000 V and d.c. supply up to 250 V. This Standard is reproduced from IEC 61347-2-11 and varied to suit national requirements.
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 13 pages
AS/NZS 61347.2.11:2003
AS/NZS 61459:2000
AS/NZS 61558.1:2008
Safety of power transformers, power supply units and similar - General requirements and
tests
Deals with safety aspects of power transformers, power supplies, reactors and similar products such as electrical, thermal and
mechanical safety. Reproduced with national modifications from IEC 61558-1 Ed.2.0.
Will supersede AS/NZS 61558.1:2000 three years from publication of the relevant Part 2. During this period it is anticipated that
regulatory authorities will approve power transformers and power supplies to the relevant Part 2 using either edition of Part.
Reprinted to incorporate Amendment 1:2009
Joint Australian/New Zealand Standard
$263.20+GST (Members), $329.00+GST (Retail), 163 pages
Amendment 1, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Safety of power transformers, power supply units and similar - Particular requirements Ignition transformers for gas and oil burners
Specifies general safety requirements for approval and test purposes for ignition transformers for gas and oil burners. This Standard
is an adoption with national modifications and contains the full text of IEC 61558-2-3:1999.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 23 pages
AS/NZS 61558.2.3:2001
AS/NZS 61558.2.3:2011 (Excludes IEC text) Safety of transformers, reactors, power supply units and combinations
thereof - Part 2.3: Particular requirements and tests for ignition transformers for gas and
oil burners
This Standard is the formal adopting document of IEC 61558-2-3 Ed 2 which has been adopted without national variation. The IEC
text, which is not included, deals with the safety of ignition transformers for gas and oil burners. Ignition transformers incorporating
electronic circuits are also covered by this standard.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Safety of transformers, reactors, power supply units and combinations
AS/NZS 61558.2.3:2011 (Includes IEC text)
thereof - Part 2.3: Particular requirements and tests for ignition transformers for gas and
oil burners
Adopted from and includes, without national variation, IEC 61558-2-3 Ed 2, and deals with the safety of ignition transformers for gas
and oil burners. Ignition transformers incorporating electronic circuits are also covered by this standard.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 27 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Safety of power transformers, power supply units and similar - Particular requirements Isolating transformers for general use
Specifies general safety requirements for approval and test purposes for isolating transformers for general use. This Standard is an
adoption with national modifications and contains the full text of IEC 61558-2-4:1997.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 17 pages
AS/NZS 61558.2.4:2001
AS/NZS 61558.2.4:2009 (Excludes IEC text) Safety of power transformers, power supply units and similar - Particular
requirements - Particular requirements for isolating transformers and power supply units
incorporating isolating transformers
This Standard does not include the text of IEC 61558.2.4 Ed 2 which provides manufacturers, designers, regulatory authorities,
testing laboratories and similar organizations with safety requirements for the design, manufacture and testing of isolating
transformers and power supply units incorporating isolating transformers which can form the basis for approval by regulatory
authorities. Reproduced from and identical to the second edition of IEC 61558-2-4:2009.
Will supersede AS/NZS 61558.2.4:2001 on 30 October 2012. Reprinted to incorporate Amendment 1:2012.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Safety of power transformers, power supply units and similar - Particular
AS/NZS 61558.2.4:2009 (Includes IEC text)
requirements - Particular requirements for isolating transformers and power supply units
incorporating isolating transformers (Includes IEC 61558-2-4 Ed 2)
Includes IEC 61558.2.4 Ed 2 and provides manufacturers, designers, regulatory authorities, testing laboratories and similar
organizations with safety requirements for the design, manufacture and testing of isolating transformers and power supply units
incorporating isolating transformers which can form the basis for approval by regulatory authorities. Reproduced from and identical to
the second edition of IEC 61558-2-4:2009.
Will supersede AS/NZS 61558.2.4:2001 on 30 October 2012. Reprinted to incorporate Amendment 1:2012.
Joint Australian/New Zealand Standard
$80.00+GST (Members), $100.00+GST (Retail), 23 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Safety of power transformers, power supply units and similar - Particular requirements Shaver transformers
Specifies general safety requirements for approval and test purposes for shaver transformers. This Standard is an adoption with
national modifications and contains the full text of IEC 61558-2-5:1997.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 18 pages
AS/NZS 61558.2.5:2003
AS/NZS 61558.2.5:2011 (Excludes IEC text) Safety of power transformers, power supplies, reactors and combinations
thereof - Part 2.5: Particular requirements for transformers for shavers, power supply units
for shavers and shaver supply units
Deals with the safety of shaver transformers, power supply units incorporating a shaver transformer, and shaver supply units. Shaver
transformers incorporating electronic circuits are also covered by this standard. Safety includes electrical, thermal, mechanical and
chemical aspects. Adopted from IEC 61558-2-5 Ed 2 with national modifications. Does not include the text of the IEC Standard.
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 15 pages
Safety of power transformers, power supplies, reactors and combinations
AS/NZS 61558.2.5:2011 (Includes IEC text)
thereof - Part 2.5: Particular requirements for transformers for shavers, power supply units
for shavers and shaver supply units
Deals with the safety of shaver transformers, power supply units incorporating a shaver transformer, and shaver supply units. Shaver
transformers incorporating electronic circuits are also covered by this standard. Safety includes electrical, thermal, mechanical and
chemical aspects. Adopted from, and includes the text of, IEC 61558-2-5 Ed 2 with national modifications.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 27 pages
Safety of power transformers, power supply units and similar - Particular requirements Safety isolating transformers for general use
Specifies safety requirements for approval and test purposes for safety isolating transformers. This Standard is an adoption with
national modifications and contains the full text of IEC 61558-2-6:1997.
Reprinted to incorporate Amendments 1 to 3
Joint Australian/New Zealand Standard
$39.20+GST (Members), $49.00+GST (Retail), 9 pages
Amendment 1, 2006 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2009 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 3, 2011 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 61558.2.6:2001
AS/NZS 61558.2.6:2009 (Excludes IEC text) Safety of transformers, reactors, power supply units and similar products for
supply voltages up to 1 100 V - Part 2.6: Particular requirements and tests for safety
isolating transformers and power supply units incorporating safety isolating transformers
This Standard does not include the text of IEC 61558.2.6 Ed 2 which provides manufacturers, designers, regulatory authorities,
testing laboratories and similar organizations with safety requirements for the design, manufacture and testing of safety isolating
transformers and power supply units incorporating safety isolating transformers which can form the basis for approval by regulatory
authorities. Adopted with national modifications from the second edition of IEC 61558-2-6:2009. It has been varied as indicated to
take account of Australian and New Zealand conditions.
Will supersede AS/NZS 61558.2.6:2001 on 30 October 2012. Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 61558.2.7:2008
Safety of power transformers, power supply units and similar - Particular requirements Bell and chime transformers
Specifies general safety requirements for approval and test purposes for bell and chime transformers. This Standard is an adoption
with national modifications and contains the full text of IEC 61558-2-8:1998.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 17 pages
AS/NZS 61558.2.8:2001
AS/NZS 61558.2.8:2011 (Excludes IEC text) Safety of transformers, reactors, power supply units and combinations
thereof - Part 2.8: Particular requirements and tests for transformers and power supply
units for bells and chimes
This Standard is the formal adopting document of IEC 61558-2-8 Ed 2 which has been adopted without national variation. The IEC
text, which is not included, deals with the safety of bell and chime transformers and power supply units incorporating bell and chime
transformers. Transformers incorporating electronic circuits are also covered by this standard. Includes electrical, thermal and
mechanical aspects.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Safety of transformers, reactors, power supply units and combinations
AS/NZS 61558.2.8:2011 (Includes IEC text)
thereof - Part 2.8: Particular requirements and tests for transformers and power supply
units for bells and chimes
Adopted from and includes, without national variation, IEC 61558-2-8 Ed 2, and deals with the safety of bell and chime transformers
and power supply units incorporating bell and chime transformers. Transformers incorporating electronic circuits are also covered by
this standard. Includes electrical, thermal and mechanical aspects.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 23 pages
Safety of power transformers, power supply units and similar - Particular requirements Particular requirements for transformers for class III handlamps for tungsten filament
lamps
Specifies general safety requirements for approval and test purposes for transformers for class III handlamps for tungsten filament
lamps. This Standard is an adoption with national modifications and contains the full text of IEC 61558-2-9:2002.
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 16 pages
AS/NZS 61558.2.9:2003
AS/NZS 61558.2.9:2011 (Excludes IEC text) Safety of power transformers, power supplies, reactors and combinations
thereof - Part 2.9: Particular requirements for transformers and power supply units for
class III handlamps for tungsten filament lamps
This Standard is the formal adopting document of IEC 61558-2-9 Ed 2 which has been adopted without national variation. The IEC
text, which is not included, deals with the safety of transformers, and power supply units incorporating transformers, for class III
handlamps for tungsten filament lamps. Covers electrical, thermal, mechanical and chemical aspects, as well as transformers
incorporating electronic circuits.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Safety of power transformers, power supplies, reactors and combinations
AS/NZS 61558.2.9:2011 (Includes IEC text)
thereof - Part 2.9: Particular requirements for transformers and power supply units for
class III handlamps for tungsten filament lamps
Adopted from and includes, without national variation, IEC 61558-2-9 Ed 2. Deals with the safety of transformers, and power supply
units incorporating transformers, for class III handlamps for tungsten filament lamps. Covers electrical, thermal, mechanical and
chemical aspects, as well as transformers incorporating electronic circuits.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 19 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
Safety of power transformers, power supply units and similar - Particular requirements Isolating transformers for the supply of medical locations
Specifies general safety requirements for approval and test purposes for isolating transformers for the supply of medical locations.
This Standard is an adoption with national modifications and contains the full text of IEC 61558-2-15:1999.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 21 pages
AS/NZS 61558.2.15:2001
AS/NZS 61558.2.16:2010 (Excludes IEC text) Safety of transformers, reactors, power supply units and similar products for
supply voltages up to 1 1000 V Part 2.16: Particular requirements and tests for switch
mode power supply units and transformers for switch mode
This Standard does not include the text of IEC 61558.2.16 Ed.1 which provides manufacturers,, designers, regulatory authorities,
testing laboratories and similar organizations with safety requirements for the design, manufacture and testing of switch mode power
supply units and transformers for switch mode power supply units which can form the basis for approval by regulatory authorities.
Adopted from IEC 61558.2.16 Ed.1.
Reprinted to incorporate Amendment1:2010 and Amendment 2:2012
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
Amendment 1, 2010 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2012 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 61558.2.16:2010 (Includes IEC text) Safety of transformers, reactors, power supply units and similar products for
supply voltages up to 1 1000 V Part 2.16: Particular requirements and tests for switch
mode power supply units and transformers for switch mode
Includes IEC 61558-2-16 Ed.1 and provides manufacturers, designers, regulatory authorities, testing laboratories and similar
organizations with safety requirements for the design, manufacture and testing of switch mode power supply units and transformers
for switch mode power supply units which can form the basis for approval by regulatory authorities. Identical to IEC 61558-2-16
Ed.1.
Reprinted to incorporate Amendment1:2010 and Amendment 2:2012
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 39 pages
Amendment 1, 2010 $33.60+GST (Members), $42.00+GST (Retail)
Amendment 2, 2012 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 61558.2.17:2001
Safety of power transformers, power supply units and similar - Particular requirements Transformers for switch mode power supplies
Specifies general safety requirements for approval and test purposes for transformers for switch mode power supplies. This
Standard is an adoption with national modifications and contains the full text of IEC 61558-2-17:1997.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 17 pages
Safety of power transformers, power supply units and similar - Particular requirements Transformers for construction sites
Specifies general safety requirements for approval and test purposes for transformers for construction sites. This Standard is an
adoption with national modifications and contains the full text of IEC 61558-2-23:2000.
Joint Australian/New Zealand Standard
$51.20+GST (Members), $64.00+GST (Retail), 25 pages
AS/NZS 61558.2.23:2001
AS/NZS 61558.2.23:2011 (Excludes IEC text) Safety of transformers, reactors, power supply units and combinations
thereof - Part 2.23: Particular requirements and tests for transformers and power supply
units for construction sites
This Standard is the formal adopting document of IEC 61558-2-23 Ed 2 which has been adopted without national variation. The IEC
text, which is not included, deals with the safety of transformers for construction sites and power supply units incorporating
transformers for construction sites. Transformers incorporating electronic circuits are also covered by this standard. Includes
electrical, thermal and mechanical aspects.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$33.60+GST (Members), $42.00+GST (Retail), 7 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 61558.2.23:2011 (Includes IEC text) Safety of transformers, reactors, power supply units and combinations
thereof - Part 2.23: Particular requirements and tests for transformers and power supply
units for construction sites
Adopted from and includes, without national variation, IEC 61558-2-23 Ed 2, which deals with the safety of transformers for
construction sites and power supply units incorporating transformers for construction sites. Transformers incorporating electronic
circuits are also covered by this standard. Includes electrical, thermal and mechanical aspects.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$56.80+GST (Members), $71.00+GST (Retail), 27 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 61779.1:2000
AS/NZS 61779.2:2000
AS/NZS 61779.3:2000
AS/NZS 61779.4:2000
AS/NZS 61779.5:2000
AS/NZS 61779.6:2000
AS/NZS 62013.2:2001
AS/NZS 62026.6:2002
Specifies requirements, in addition to those of AS/NZS 62026.1:2001, for interface systems between single or multiple controllers
and control circuit devices and switching elements. Establishes requirements for the interchangeability of components of such
interfaces. This Standard is identical with and has been reproduced from IEC 62026-6:2001.
Joint Australian/New Zealand Standard
$148.80+GST (Members), $186.00+GST (Retail), 76 pages
AS/NZS 62086.1:2002
AS/NZS 62086.2:2002
Power consumption of audio, video and related equipment - Part 2.2: Minimum energy
performance standards (MEPS) and energy rating label requirements for television sets
Provides designers, manufacturers, importers, test laboratories, regulators and users of mains-operated television sets with
minimum energy performance standards (MEPS) and energy rating label requirements for these devices.
Reprinted to incorporate Amendment 1:2012
Joint Australian/New Zealand Standard
$125.60+GST (Members), $157.00+GST (Retail), 44 pages
Amendment 1, 2012 $33.60+GST (Members), $42.00+GST (Retail)
AS/NZS 62087.2.2:2011
AS/NZS 80079.34:2012
Software engineering - Guidelines for the application of AS/NZS ISO 9001:2000 to computer
software
Provides guidance in the application of ISO 9001:2000 (Quality management systems - Requirements) in relation to complex
software. Identical to ISO/IEC 90003:2004.
Joint Australian/New Zealand Standard
$159.20+GST (Members), $199.00+GST (Retail), 64 pages
AS/NZS ISO/IEC 90003:2007
NZMP 420400:1973
(Withdrawn)
NZMP 420500:1973
(Withdrawn)
Blocks (building)
block paving, NZS 3116
buildings not requiring specific design, NZS 4229
concrete masonry, AS/NZS 4455
- methods of test, AS/NZS 4456
masonry construction, NZS 4210, AS/NZS 2699
segmental pavers, AS/NZS 4455
- methods of test, AS/NZS 4456
structural design, NZS 4230
Blocks (paving), interlocking concrete, NZS 3116
Blood pressure
direct monitoring equipment, AS/NZS 3200.2.34
indirect monitoring equipment, AS/NZS 3200.2.30
Boarding houses, hostels, model bylaw, NZS 9201.3
Boards (see also Plywood)
decorative, AS/NZS 1859.3
dimensional co-ordination, NZS 4207
gypsum plasterboard, AS/NZS 2588, AS/NZS 2589
insulating, AS/NZS 1859.5
particleboard, AS/NZS 1860
Boats
LPG use, NZS 5428, AS/NZS 5601.2
- self-containment, NZS 5465
Bolts
BS Whitworth, AS/NZS 2451
cup head, metric, AS/NZS 1390
high strength steel, AS/NZS 1252
structural, AS/NZS 1252
tower, AS/NZS 1559
unified hexagon, AS/NZS 2465
Whitworth, AS/NZS 2451
Book numbers, ISBN, AS/NZS 1519
Book orders reporting, AS/NZS 2807
Boots (see Footwear)
Brake fluids, AS/NZS 1960
Brake hose
air, NZS/SAE J1402
hydraulic, NZS/SAE J1401
vacuum, NZS/SAE J1403
Brazing & welding, filler metal, AS/NZS 1167
Breathing apparatus
medical, AS/NZS 2496
self-contained, compressed air, AS/NZS 1716
- selection, use & maintenance, AS/NZS 1715
Breathing tubes, anaesthetic, ISO 5367
Bricks, clay building
masonry construction, NZS 4210, AS/NZS 2699
Broadcast teletext, NZS 6606
Builders' hardware, door lock & latch, NZS/BS 5872
Builders' mix, NZS 3121
tests, NZS 3111
Building
boards, AS/NZS 1859
- flat sheet sizes, NZS 4207
bricks (see Bricks)
cabling, AS/NZS 3080, AS/NZS 3085
concrete construction, NZS 3109
construction industry
- quality system guidelines, AS/NZS 3905
contracts, NZS 3902, NZS 3910, NZS 3915
design
- access by disabled persons, NZS 4121
- loadings, AS/NZS 1170
- reinforced concrete, NZS 3101
- steel structures, NZS 3404, AS/NZS 4600
Cables
NZS/BS PD 2379
Chairs
children's
- high, NZS/BS 5799
- school, AS/NZS 4610
fixed height, AS/NZS 4688
monobloc, AS/NZS 3813
shower, for use in, AS/NZS 3973
swivel, AS/NZS 4438
toilet, for use in, AS/NZS 3973
Chemical analysis and testing
milk, cream, NZS 2246
Child carrier seats for pedal bicycles, AS/NZS 4287
Child-resistant packaging, NZS 5825
Child-restraining devices
in motor vehicles, AS/NZS 1754, AS/NZS 3629
- children with disabilities, AS/NZS 4370
Children's
clothing, low fire danger night clothes, AS/NZS 1249
cots
- domestic use, AS/NZS 2172
- folding, AS/NZS 2195
- institutional, hospital and nursery use, AS/NZS 2130
school chairs, AS/NZS 4610
Christmas tree lights, AS/NZS 60598.2.20
Cigarettes
extinction propensity, NZS/AS 4830
lighters, AS/NZS 4867
Cinemas, fire precautions, NZS 9232
Circuit-breakers
high voltage, IEC 56
household, AS/NZS 4898, AS/NZS 60898
Circular saws, AS/NZS 60745.2.5
Civil engineering
contracts, conditions, NZS 3910, NZS 3915
quantities, measurement, NZS 4224
Cladding
cellulose-cement sheets, AS/NZS 2908
materials, AS/NZS 4256, AS/NZS 4257
Classification of hazardous areas, AS/NZS 60079.10
Clay products (see Ceramics)
Cleaning materials (see also Disinfectants), AS/NZS 2541
acidic detergents, dairy industry, AS/NZS 1389
alkaline detergents, heavy duty, dairy industry, AS/NZS 1400
iodophors, dairy industry, NZS 8341
Cleanrooms & associated controlled environments, AS/NZS ISO 14644
Clocks, electrical safety, AS/NZS 3350.2.26, AS/NZS 60335.2.26
Cloth towels
single-service, AS/NZS 4286
Clothes dryers, AS/NZS 2442, AS/NZS 60335.2.43
energy consumption, AS/NZS 2442
tumble dryers, AS/NZS 2442, AS/NZS 60335.2.11
Clothing
care labelling, AS/NZS 1957
children's night clothes, low fire danger, AS/NZS 1249
fabrics, low fire danger, NZS 8704
protective (see Protective clothing)
CNG
compressor equipment, NZS 5425.2
cylinders, automotive, NZS 5454
fuel systems, AS/NZS 2739
fuels, use of, AS/NZS 1425
refuelling stations, NZS 5425
building and construction work, NZS 3902, NZS 3910, NZS 3915
supply of equipment, AS/NZS 4911
Control cables, multicore and twisted pair AS/NZS 5000.3
Control charts, AS/NZS 3944
Controlgear, for lamps, AS/NZS 61347
Control systems, function charts, preparation of, AS/NZS 4382
Control valves
hot water systems. NZS 4608
gate valves for waterworks, NZS/AS 2638
Conversion factors, AS/NZS 1376
Cooking appliances
electric, AS/NZS 60335.2.6, AS/NZS 60335.2.9
- deep fat fryers, AS/NZS 60335.2.13
- frypans, AS/NZS 60335.2.6
- hotplates, AS/NZS 60335.2.6
- microwave ovens, AS/NZS 2895, AS/NZS 3350.2.25, AS/NZS 60335.2.90
- ovens, AS/NZS 60335.2.6, AS/NZS 60335.2.9
- percolators, AS/NZS 60335.2.6
- ranges, AS/NZS 60335.2.6
- toasters, AS/NZS 60335.2.9
- warming plates, AS/NZS 60335.2.12
Coolant, engine, AS/NZS 2108
Coolers, unit, testing, NZS/BS 4856
Copper alloy and composite flanges, AS/NZS 4331.3
Copper & copper alloys
conductors (see Electric cables)
cylinders
- water heating, NZS 4602
refinery shapes, AS/NZS 1279
tubes
- seamless for air-conditioning and refrigeration, AS/NZS 1571
- water, gas, sanitation, NZS 3501
wire
- for electrical purposes, AS/NZS 1574
- for engineering purposes, AS/NZS 1573
wrought rods, bars and sections, AS/NZS 1567
Cord extension sets, AS/NZS 3199
Cord extension sockets, AS/NZS 3120
Cordless telephones
radiocommunications requirements, AS/NZS 4281
Cords, electric (see also: Electric cables)
flexible, AS/NZS 3191
test methods, AS/NZS 1660
Corporate governance, AS/NZS 8016, AS/NZS ISO/IEC 38500
Corrosion protection, iron and steel, AS/NZS 2312, AS/NZS 2728
Corrugated cellulose cement sheets, AS/NZS 2908
Cots
domestic use, AS/NZS 2172
folding, AS/NZS 2195
institutional, hospital and nursery use, AS/NZS 2130
Couplers
appliances, AS/NZS 60320
approval and test specification, AS/NZS 3123, AS/NZS 61535
installation, AS/NZS 61535
Coupling devices, articulated vehicles
fifth wheel assemblies, NZS 5450
fifth wheel kingpins, NZS 5451
Couplings
metal-banded, low-pressure applications, AS/NZS 4327
trailers, NZS 5232
Courier service, see introductory pages
Covered overhead conductors, AS/NZS 3675
Cradles, rocking, AS/NZS 4385
Cranes
design rules, NZS/BS 2573
Electric cables
accessories, test requirements, AS/NZS 4805
aerial (see overhead - listed below)
analogue television, AS/NZS 1367
conductors, NZS/AS 1125
connectors, AS/NZS 4325, AS/NZS 60998
- insulation piercing, AS/NZS 4396, AS/NZS 60998.2.3
control, AS/NZS 5000.3
copper wire, AS/NZS 1574
drums
- metal, NZS/AS 3983
- timber, AS/NZS 2857
elastomer insulated, AS/NZS 3116
fire performance, AS/NZS 4507
fire tests, AS/NZS 1660.5
flexible cords, AS/NZS 3191
high voltage luminous signs, AS/NZS 3166
identification colours of threads, NZS/BS PD 2379
insulating
- materials, AS/NZS 1660, AS/NZS 3808
- sleeving, AS/NZS 1660.2
lead sheaths, AS/NZS 2893
marking, AS/NZS 4417
mineral-insulated
- cables to 750V, AS/NZS 60702.1
- metal-sheathed (MIMS), AS/NZS 60702
- terminations, AS/NZS 60702.2
mining, AS/NZS 1747, AS/NZS 2802
multicore, control, AS/NZS 5000.3
overhead
- aerial bundled (HV), NZS/AS 3599
- aerial bundled (LV), AS/NZS 3560
- aerial bundled (LV) fittings, NZS/AS 3766
- aluminium, NZS/AS 1531
- aluminium, steel reinforced, NZS/AS 3607
- copper, AS/NZS 1574, NZS 2206, NZS/AS 1746
- PVC covered, NZS 1762
- steel (transmission), NZS/AS 1222
paper insulated, AS/NZS 1026
polymeric insulated, AS/NZS 1429, AS/NZS 4961, AS/NZS 5000
PVC insulated, AS/NZS 60227
reeling and trailing
- coal mining, AS/NZS 1747, AS/NZS 1802
- general, AS/NZS 2802
rubber insulated, AS/NZS 60245
selection of, AS/NZS 3008
short-circuit temperature limits, IEC 724
silicone rubber insulated, NZS/AS 3178
television, AS/NZS 1367
test methods, AS/NZS 1660
traffic signal installations, AS/NZS 2276
trunking systems, AS/NZS 4296
twisted pair, AS/NZS 2373
underground coal mines, AS/NZS 1802, AS/NZS 1972
underground residential distribution, AS/NZS 4026
Electric or electrical
anaesthetic workstations, AS/NZS 3200.2.13
appliances (see also specific appliance names and electrical household appliances listed below)
- general, AS/NZS 60335.1
- for heating liquids, AS/NZS 60335.2.15
- for chilling liquids, AS/NZS 4776.2
aquarium equipment, AS/NZS 60335.2.41, AS/NZS 60335.2.55
audio, AS/NZS 60065
ballasts for fluorescent lamps, AS/NZS 60929, AS/NZS 61347
barbecues, outdoor, AS/NZS 60335.2.78
Electrical
apparatus in potentially explosive atmospheres AS/NZS 2229, AS/NZS 60079, AS/NZS 80079, HB 239
caplights for mines, AS/NZS 60079.35
- competencies for working with, AS/NZS 4761
- electrical resistance trace heating, AS/NZS 60079.30
- repair & overhaul, AS/NZS 3800, HB 239
connectors for trailer vehicles, NZS/AS 2513
control or conditioning devices, portable, AS/NZS 3197
drawing practice, for students, SAA/SNZ HB 3
household appliances, AS/NZS 60335
installations, buildings structures and premises, AS/NZS 3000, AS/NZS 3003, NZMP 6004, AS/NZS 3001, AS/NZS 3002,
AS/NZS 3004, AS/NZS 3008, AS/NZS 3832
- cable selection, AS/NZS 3008
- in-service testing, AS/NZS 3019
lighting equipment, AS/NZS 4783
safe working, low voltage, AS/NZS 4836
Electrical requirements and approvals in New Zealand, AS/NZS 4417
Electricity
effects on humans & livestock, AS/NZS 60479
emergency, NZS 6104
in-service testing, AS/NZS 1284.13
safe use in patient care, AS/NZS 2500
static, AS/NZS 1020
substations, NZS 6108
Electrocardiographs, AS/NZS 3200.2.25, AS/NZS 3200.2.27
Electrocutors, insect, AS/NZS 60335.2.59
Electrodes
buildup & wear resistance, AS/NZS 2576
covered, for welding, AS/NZS 4855, AS/NZS 4856, AS/NZS 4857
metal arc, AS/NZS 2717, AS/NZS 4854, AS/NZS ISO 14343
procurement guidelines, AS/NZS ISO 544, AS/NZS ISO 14344
tubular cored, AS/NZS ISO 17632, AS/NZS ISO 17633, AS/NZS ISO 17634, AS/NZS ISO 18276
wires and rods, AS/NZS ISO 18273
Electroencephalographs, AS/NZS 3200.2.26
Electromagnetic compatibility
environment, AS/NZS 61000.2
general, AS/NZS 61000.1
generic emission, AS/NZS 4251
generic immunity and emission standards, AS/NZS 61000.6
limits, AS/NZS 61000.3
radiocommunications equipment, AS/NZS 4268, AS/NZS 4778
testing & measurement, AS/NZS 61000.4
Electromagnetic interference
generic emission
- residential, commercial, light industry, AS/NZS 61000.6, AS/NZS 4251, AS/NZS CISPR 14.1
generic immunity
- residential, commercial, light industry, AS/NZS 61000.6, AS/NZS CISPR 14.2
limits and measurements
Electronic
Glazing
Glossary
Gloves
Hazardous areas
apparatus, AS/NZS 2229, AS/NZS 60079, AS/NZS 80079
- competencies for working with, AS/NZS 4761
classification, AS/NZS 2381, AS/NZS 60079.10, AS/NZS 61241
electrical safety
- gas, AS/NZS 1826
- coal mines, AS/NZS 2290
- spray painting booths, AS/NZS 4114
Hazardous substances (see Dangerous materials)
Hazard testing, fire, AS/NZS 60695
Headstones, NZS 4242
Healthcare
allied health services sector, NZS 8171
- chiropractic services, SNZ HB 8171.2
- physiotherapy services, SNZ HB 8171.1
alcohol and drug treatment, NZS 8157
day-stay surgery, NZS 8164
facilities, office based, AS/NZS 4815
family violence risk assessment, NZS 8006
fertility services, NZS 8181, SNZ HB 8181
human tissue, non-therapeutic use of, NZS 8135
mental, NZS 8143, SNZ HB 8143
practice management systems, SNZ PAS 8170
records, NZS 8153
risk management, SAA/SNZ HB 228
rooms/office based surgery, NZS 8165
waste management, AS/NZS 3825, NZS 4304
Health network code of practice, SNZ HB 8169
Health & disability sector, NZS 8134, SNZ HB 8134, NZS 8158, SNZ HB 8158
Hearing
acoustic measurement of musical pitch, NZS/ISO 16
aids, AS/NZS 1088
disabilities, textphones for, AS/NZS 4277
protection program, AS/NZS 1269.3
Heat detectors, NZS 4512
Heat exchangers, fan coil units, testing & rating, NZS/BS 4856
Heaters (see specific types: Space heaters, Immersion heaters, Water heaters, Boilers)
floor and ceiling, NZS 6110
room, AS/NZS 3102, AS/NZS 60335.2.30, AS/NZS 60335.2.61, AS/NZS 60335.2.96
solid fuel, AS/NZS 2918, AS/NZS 3869, AS/NZS 4012, AS/NZS 4013, AS/NZS 4014, AS/NZS 4886, AS/NZS 5078
- with electrical connections, AS/NZS 60335.2.102
unit, testing, NZS/BS 4856
Heating equipment
for breeding and rearing animals, AS/NZS 60335.271
geothermal, NZS 2402P
Heating tools, portable, AS/NZS 60335.2.45
Heavy vehicles, load anchorage points, NZS 5444
Hedge trimmers, AS/NZS 60745.2.15
Helicopters, noise management and land use, NZS 6807
Helmets, protective
ATV, NZS 8600
cricket, AS/NZS 4499
firefighters, AS/NZS 4067
horse & pony riders', AS/NZS 3838
industrial, NZS 2264, AS/NZS 1801
methods of test, AS/NZS 2512
motor cyclists', NZS 1215, NZS 5430, AS/NZS 1698
occupational, AS/NZS 1800, AS/NZS 1801
pedal cyclists', AS/NZS 2063
vehicle users, NZS 5430, AS/NZS 1698
Hexagon socket screws & wrench keys, NZS/BS 4168
Hides
green, NZS 8404
treatment, grading, classification cured, NZS 8401
High chairs, safety, NZS/BS 5799
J
Jacks, vehicle, AS/NZS 2693
Job
evaluation, gender inclusivity in, NZS 8007
transfer and manipulation
- protocols, OSI, AS/NZS 3698
- service, OSI, AS/NZS 3697
Joinery profiles, NZS 3610
Joint rings, elastomeric for pipes, NZS/BS 2494
Jugs, electric, AS/NZS 60335.2.15
K
Kettles, electric, AS/NZS 60335.2.15
Keyboard layouts, AS/NZS 4395
Kitchen assemblies
domestic, AS/NZS 4386
methods of test, AS/NZS 4387
Kitchen machines, AS/NZS 60335.2.14
L
Labelling, textiles, AS/NZS 2392
Labels, dangerous materials transportation, NZS 5433
Laboratory
bodies performing inspection, AS/NZS ISO/IEC 17020
general requirements, AS/NZS 2982, NZS ISO/IEC 17025
safety, AS/NZS 2243
Ladders
fixed, NZS/AS 1657
portable, AS/NZS 1892
wood, NZS 3609
Laminated veneer lumber, AS/NZS 4357
methods of test, AS/NZS 2098
Laminates
plastic sheet, AS/NZS 2924
wood, glue for, AS/NZS 1328
Lamp caps & holders, bayonet type, AS/NZS 3117, AS/NZS 61184
Lamp coding system, AS/NZS 4293
Lampholders, Edison screw, AS/NZS 3140
Lamps (see also Lighting)
auxiliaries
- general safety, AS/NZS 60922, AS/NZS 61048
- performance, AS/NZS 60923, AS/NZS 61047, AS/NZS 61049
ballasts
- for tubular fluorescent, AS/NZS 60929, AS/NZS 61347
coding system, AS/NZS 4293
controlgear, AS/NZS 61347
glow starters, AS/NZS 60155
incandescent
- recessed, barriers for, AS/NZS 5110
- safety, AS/NZS 60432
- test methods, AS/NZS 4934.1
photobiological safety of, AS/NZS IEC 62471
self ballasted
- general requirements, AS/NZS 60969
- MEPS requirements, AS/NZS 4847.2
- safety requirements, AS/NZS 60968
- test methods, AS/NZS 4847.1
standards and brackets, portable, AS/NZS 60598.2.4, AS/NZS 3128
traffic hazard, NZS 5415
Livestock
N
National plumbing and drainage code, AS/NZS 3500
National timber grading rules (New Zealand), NZS 3631
Natural gas
cylinders, automotive, NZS 5454
odorization, NZS 5263
reticulated, NZS 5442, AS/NZS 4645
Natural ventilators, AS/NZS 4740
Network analysis, glossary, NZS/BS 4335
New Zealand electrical requirements & approvals, AS/NZS 3000, AS/NZS 4417
Night clothes, children (see Clothing)
Night store heaters, AS/NZS 60335.2.30, AS/NZS 60335.2.61
Nippers and pliers, AS/NZS 4056
Nocturnal enuresis conditioning equipment, AS/NZS 2394
Noise management,
helicopter landing areas, NZS 6807
occupational, AS/NZS 1269
Noise measurement
airports, NZS 6805
auditory assessment, AS/NZS 1269.4
construction, demolition works, NZS 6803
control, AS/NZS 1269.2
environmental, NZS 6802
methods, NZS 6801, AS/NZS 2499
occupational, AS/NZS 1269.1
port noise, NZS 6809
road traffic, NZS 6806
sound insulation in buildings, AS/NZS ISO 717
Nuisances, model bylaw, NZS 9201 Chapter 11
Nuts
BS Whitworth thread, AS/NZS 2451
unified hexagon, AS/NZS 2465
O
Occupational diving, AS/NZS 2299
Occupational environment
eye protection, AS/NZS 1336
guide, SAA/SNZ HB 139
noise, AS/NZS 1269
OHSMS, AS/NZS 4804, NZS 4801
safety mesh, AS/NZS 4389
safety signs, NZS/AS 1319
Occupational health and safety systems, AS/NZS 4804, NZS 4801
Office based health care facilities, AS/NZS 4815
Office desks, AS/NZS 4442
Office panels, workstations, AS/NZS 4443
Open Systems Interconnection
Abstract Syntax Notation One (ASN.1)
- basic encoding rules, AS/NZS 8825
- specification, AS/NZS 8824
addressing tutorial, SAA/SNZ HB 68
alarm reporting function, AS/NZS 4152.4
attributes for representing relationships, AS/NZS 4152.3
basic reference model, AS/NZS 2777, NZS/ISO/IEC 7498
common management protocol, AS/NZS 3964
conformance testing, AS/NZS 4103, AS/NZS 4150
connection mode, AS/NZS 4210
connection mode network service, AS/NZS 4099
connection mode network using X.25, AS/NZS 3604, AS/NZS 4095
connection mode transport service, AS/NZS 4229.1
- requirements for CSMA CD local area networks, AS/NZS 4229.2
- X.25 end system, AS/NZS 4229.5
P
Packaging
child-resistant, NZS 5825
materials, polyethylene film, NZS 7651
Packet layer conformance test suite, AS/NZS 3621, AS/NZS 3512, AS/NZS 4157
Paging service, radiocommunications, AS/NZS 4769
Painting, buildings, practice and materials, AS/NZS 2311
Paints
glossary, AS/NZS 2310
methods of test, AS/NZS 1580
roadmarking, AS/NZS 4049
steel structures, AS/NZS 3750
Pallets, handling, NZS 2010
Panels (see Boards)
Paper
APPITA tests, NZS/AS and AS/NZS 1301
for MICR encoded documents, NZS/AS 2277
school stationery, NZS 8132
Paper and pulp tests, NZS/AS and AS/NZS 1301
Paper products, building
breather, NZS 2295, AS/NZS 4200, AS/NZS 4201
waterproof, NZS/BS 1521
Parking facilities
off street, AS/NZS 2890.1
disabled parking, AS/NZS 2890.6
Parks, model bylaw, NZS 9201.2
Particle board flooring, AS/NZS 1860.1
Particle size distribution, tests for soils, NZS 4402.2.81
Passenger lifts for private residence, AS/NZS 1735.18
Passenger vehicles, new tyres, NZS 5453
Patrols, AS/NZS 4421
Paua, processing, NZS 8405
Pavement marking, glass beads, AS/NZS 2009
Paving, interlocking concrete, NZS 3116
Pedal bicycles
child carrier seats for, AS/NZS 4287
lighting & retroreflectors, NZS 5441
safety requirements, AS/NZS 1927
Pedestrian
lighting, AS/NZS 1158
slip resistance, AS/NZS 4586, AS/NZS 4663
surfaces, AS/NZS 3661
Penetration resistance of soil
cone or friction cone method, NZS 4402.6.5.3
hand method, dynamic cone pentrometer, NZS 4402.6.5.2
standard penetration test, NZS 4402.6.5.1
Perambulators (see Prams & pushchairs)
Percolators, electric, AS/NZS 60335.2.6
Petroleum liquids and gases, measurement, data transmission, NZS/ISO 6551, AS/NZS 4645
Petroleum liquids transportation pipelines, NZS 5223, NZS/AS 2885
Pharmacies, AS/NZS 8134.7
Photovoltaic arrays, installation, AS/NZS 5033
pH value, tests for soils, NZS 4402.3.3
Piecarts, model bylaw, NZS 9201.24
Piles, timber, load bearing, NZS 3605
Pipe fittings (see also Pipes & fittings)
cast copper, NZS/BS 143, 1256
cast iron, malleable, NZS/BS 143, 1256
cast iron pipe, AS/NZS 2544
ductile iron, AS/NZS 2280
polyethylene
- hot and cold, AS/NZS 2537
- drainage & sewerage, AS/NZS 5065
Pipe threads, NZS/BS 21
test method
- determination combustion, AS/NZS 2122
- ultraviolet lamps, AS/NZS 2433
Platforms, fixed, NZS/AS 1657
Playgrounds and playground equipment, NZS 5828, SNZ HB 5828
Pliable building membranes & underlays, NZS 2295, AS/NZS 4200, AS/NZS 4201, AS/NZS 4858
Pliers and nippers, AS/NZS 4056
Plugs and socket-outlets, AS/NZS 3112, AS/NZS 60320
approval and test specification, AS/NZS 3123
in installation wiring systems, AS/NZS 3131
Plywood
construction, AS/NZS 2269
exterior, AS/NZS 2271
interior, AS/NZS 2270
marine, AS/NZS 2272
methods of sampling, AS/NZS 2097
methods of test, AS/NZS 2098
Pneumatic tyres
inflation pressure, AS/NZS 1268
new, truck & bus, AS/NZS 2230
Poles
concrete, for electrical transmission, AS/NZS 4065, AS/NZS 4676
steel, for electrical transmission, AS/NZS 4676, AS/NZS 4677
timber
- for electrical transmission, AS/NZS 4676
- load bearing, NZS 3605
Polyethylene
compounds for pressure pipes and fittings, AS/NZS 4131
film for packaging, NZS 7651
pipe installation, AS/NZS 2033
pipes
- blue, underground, for potable water, NZS 7610
- cold water, NZS 7601, NZS 7602, AS/NZS 2492, AS/NZS 2537
- fittings, for pressure applications, AS/NZS 4129
- gas, NZS 7646, AS/NZS 4645
- hot water, AS/NZS 2492, AS/NZS 2537
- pressure applications, AS/NZS 4130
- waste discharge, AS/NZS 4401
Polymeric insulation, for cables, AS/NZS 1429
Polystyrene, expanded board, NZS/AS 1366
Polythene (see Polyethylene)
Polyurethane condoms, NZS 7106
Polyvinyl chloride (see PVC)
Port noise, NZS 6809
Portable electric tools, hand-held, AS/NZS 3160, AS/NZS 60745
Portable electrical control or conditioning devices, AS/NZS 3197
Portable electrical outlet devices, AS/NZS 3105
Portable fire extinguishers (see Fire extinguishers, portable)
Portland cement, NZS 3122
methods of test, AS/NZS 2350
pozzolan, NZS 3123
supplementary materials, AS/NZS 3582
Portland-limestone filler cement, NZS 3125
Portable electrical outlet devices, AS/NZS 3105
Posts, fence, timber, NZS 3607
Potting mixes, legionellae, AS/NZS 5024(Int)
Poultry keeping, model bylaw, NZS 9201.13
Powder-actuated (PA) hand held fastening tools, AS/NZS 1873
Power cords (see Electric cables)
Power lines (see also Electric cables)
copper conductors
- bare, AS/NZS 1574, NZS 2206
- with extruded insulation, AS/NZS 60840
- PVC covered, NZS 1762
overhead line design, AS/NZS 7000
Quantity
design, production, installation, servicing, AS/NZS ISO 9001, AS/NZS ISO 9004
environmental management systems, AS/NZS ISO 14001, AS/NZS ISO 14004
- auditing, AS/NZS 19011
- labels, AS/NZS ISO 14021
- life cycle assessment, AS/NZS 14040, AS/NZS 14041
- performance evaluation, AS/NZS 14031, SAA/SNZ HB 145
guidelines, AS/NZS 3905, SA/SNZ HB 90.1
- for architecture & engineering design, AS/NZS 3905.12
- for food and drink industry, AS/NZS ISO 15161
- for project management, AS/NZS 3905.16
- for small businesses, what to do, SAA/SNZ HB 66
- for the hospitality industry, AS/NZS 3905.3
- for the road freight transport industry, AS/NZS 3905.7
health & safety environment, SAA/SNZ HB 139
plans, AS/NZS ISO 10005
selection & use, guide, AS/NZS ISO 9000
small businesses, SAA/SNZ HB 66
software, AS/NZS 4366, AS/NZS 9126, AS/NZS ISO/IEC 25062
vocabulary, AS/NZS ISO 9000
measurement, civil engineering, NZS 4224
surveying, NZS 4202
R
RCBOs, AS/NZS 61009
RCCBs (Residual current-operated circuit breakers), AS/NZS 61008
RCDs (Residual current devices) AS/NZS 3190
Racing car drivers' helmets, NZS 5430, AS/NZS 1698
methods of test, AS/NZS 2512
Racquet sports, eye protectors for, AS/NZS 4066
Radar transponders, marine search and rescue, AS/NZS 4432
Radiant warmers, infant, AS/NZS 3200.2.21
Radiation
filters for eye protection against, AS/NZS 1337, AS/NZS 1338
radiofrequency, NZS 2772.1, AS/NZS 2772.2
Radio antennae, NZS 6603
Radio disturbance characteristics
information technology equipment, AS/NZS CISPR 22
measurement of lighting, AS/NZS CISPR 15
receivers on boats & vehicles, AS/NZS CISPR 25
Radio equipment
amplitude modulated equipment, aeronautical, AS/NZS 4583
fixed services, AS/NZS 4295
HF citizen band, AS/NZS 4355
land mobile, AS/NZS 4295
maritime, AS/NZS 4582, AS/NZS 4869, AS/NZS IEC 62287, AS/NZS 62320, AS/NZS 61097
protection of, AS/NZS CISPR 12, AS/NZS CISPR 25
short range devices, AS/NZS 4268
UHF citizen band, AS/NZS 4365
VHF, maritime, AS/NZS 4415, AS/NZS 61097
Radio frequency identification of animals, NZS/ISO 11784, NZS/ISO 11785
Radio interference (see also Electromagnetic interference)
interference limits for FM-sound receivers, AS/NZS CISPR 13
interference measuring apparatus, AS/NZS CISPR 16
measurement and suppression, AS/NZS CISPR 12
receivers on board vehicles, AS/NZS 4448, AS/NZS CISPR 12, AS/NZS CISPR 25
Radio reception, VHF-FM, NZS 6602
Radio transmitting equipment
aeronautical, AS/NZS 4583
maritime
- AIS, AS/NZS 62320
- CSTDMA, AS/NZS IEC 62287
- MF & HF, AS/NZS 4582
Sampling
Single-use
gloves (sterile), AS/NZS 4179
winged intravenous devices (sterile), AS/NZS 2485
Skin care appliances, AS/NZS 3359.2.23
Skin treatment appliances, ultra-violet & infra-red, AS/NZS 60335.2.27
Skins (see Hides)
Slip hazards
reduction, AS/NZS 3661
resistance, AS/NZS 4586
Slip resistance measurement of existing pedestrian surfaces, AS/NZS 4663
Small businesses, quality assurance, SAA/SNZ HB 66
Smoke
alarms, interconnected, NZS 4514
control, chart, Ringelmann, NZS 5201
release rates, AS/NZS 3837
Snow loading on buildings, AS/NZS 1170
Socket screws, ISO metric, AS/NZS 1421
Sockets, electric (see Electric plugs & sockets)
Software
documentation, AS/NZS 4258
engineering, AS/NZS ISO/IEC 15289, AS/NZS ISO/IEC 16326, AS/NZS ISO/IEC 18019, AS/NZS ISO/IEC 19759, AS/NZS
ISO/IEC 19761, AS/NZS ISO/IEC 20926, AS/NZS ISO/IEC 23026, AS/NZS ISO/IEC 24570, AS/NZS ISO/IEC 25000,
AS/NZS ISO/IEC 25051, AS/NZS ISO/IEC 25062, AS/NZS ISO/IEC 90003
guide, AS/NZS 4598
life cycle process, AS/NZS ISO/IEC 12207, AS/NZS 15271
measurement, AS/NZS 14143, AS/NZS 15939
Petri nets, AS/NZS 15909
product evaluation, AS/NZS 14598
quality
- product quality, AS/NZS 9126
- requirements & testing, AS/NZS 4366, AS/NZS ISO/IEC 25062
Soil, fill for residential development, NZS 4431
Soil conditioners, NZS 4454
Soil testing, civil engineering, NZS 4402
Solar collectors, AS/NZS 2535
Solar water heaters
installation, NZS 4614
performance rating, AS/NZS 4445.1
specification, AS/NZS 2712, NZS 4613
Solaria for cosmetic purposes AS/NZS 2635
Soldering irons, electric, AS/NZS 60335.2.45
Solderless crimped connections, AS/NZS 4437
Solid fuel heaters
domestic, AS/NZS 3869, AS/NZS 4012, AS/NZS 4013, AS/NZS 4014, AS/NZS 4886, AS/NZS 5078
- installation, AS/NZS 2918
with electrical connections, AS/NZS 60335.2.102
Solvent cement
for PVC (uPVC) pipes, AS/NZS 3879
Sound measurement (see also Acoustic measurement)
methods, NZS 6801, NZS 6802, AS/NZS 2499
Sound signals, distribution, NZS 6603
Spa pools
fences for, NZS 8500
water quality, NZS 5826
electrical equipment, safety, AS/NZS 3136
Spa-baths, electrical equipment, safety, AS/NZS 3350.2.60, AS/NZS 3136, AS/NZS 60335.2.60
Space heaters
electric, safety, AS/NZS 3102, AS/NZS 60335.2.30, AS/NZS 60335.2.61
secondary guards AS/NZS 2286
solid fuel, AS/NZS 2918, AS/NZS 3869, AS/NZS 4012, AS/NZS 4013, AS/NZS 4014, AS/NZS 4886, AS/NZS 5078
- with electrical connections, AS/NZS 60335.2.102
thermal storage, AS/NZS 60335.2.30, AS/NZS 60335.2.61
unit, testing, NZS/BS 4856
Spectacles
fashion spectacles, AS/NZS 1067
spectacle lenses, NZS/BS 3062, AS/NZS ISO 8980, AS/NZS ISO 13022, AS/NZS ISO 13666, AS/NZS ISO 14889,
AS/NZS ISO 16034, AS/NZS ISO 21987, TR ISO 28980
Speed, of traffic, Bylaw, NZS 9201.28
Spin extractors, AS/NZS 60335.2.4
Spools for electric winding wires, NZS/AS 1005
Sport & recreation
risk management, HB 246
symbols, NZS 8603
Spray extraction appliances, AS/NZS 60335.2.68
Spray painting booths, AS/NZS 4114
Sprinkler systems
automatic, NZS 4541
fire
- for housing, NZS 4517
- sleeping occupancies, NZS 4515
irrigation, design & installation, NZS 5103
SQL database language, AS/NZS 3968
Stainless steel structural welding, AS/NZS 1554.6
Stairways, ladders, etc, fixed, NZS/AS 1657
Standard Generalized Markup Language (SGML), NZS/ISO 8879
Standards
abbreviations used, NZMP 8201
rules of procedures for council meetings, NZMP 103
Standing orders
boards, councils, committees, NZMP 9204
territorial authorities, bylaw, NZS 9202
Static electricity, control of, AS/NZS 1020
Stationery and printing (see Paper)
Stationary source emissions, AS/NZS 4323
Steam cleaners, AS/NZS 60335.2.79
Steel
casting testing, AS/NZS 2574
colour coding of steel product, AS/NZS 4496
conductors & stays, NZS/AS 1222
construction
- code for design, NZS 3404
- metal-arc welding, AS/NZS 1554, NZS 4702
- methods of test, AS/NZS 2098
- safe erection, SAA/SNZ HB 62
- stainless steel structural welding, AS/NZS 1554.6
- structural steel, AS/NZS 3679
- structural steel, welding, AS/NZS 1554, NZS 4702
flanges, AS/NZS 4331.1
methods of analysis, AS/NZS 1050
pipes
- corrugated, AS/NZS 2041.4
- epoxy coatings, AS/NZS 3862
- gas, NZS/AS 2885, AS/NZS 4645
- hdp coatings, AS/NZS 1518
- liquid petroleum, NZS/AS 2885
- specification, NZS/BS 3601
- welded, NZS 4442
reinforcing materials, AS/NZS 1554.3, AS/NZS 4671
structures
- paints for, AS/NZS 3750
- safe erection of, SAA/SNZ HB 62
- studs, welded, AS/NZS 1554.2
Steels & wrought products
bars
- concrete reinforcement, NZS 4671
- hot-rolled structural, AS/NZS 3679.1
fencing wire, NZS 3471
hot-rolled plates, floorplates and slabs, AS/NZS 3678, AS/NZS 1594
- tolerances, AS/NZS 1365
pipes (see Pipes & fittings, and Tubes)
Trailers