Professional Documents
Culture Documents
Design Results
Reinforced Concrete Footings
GENERAL INFORMATION:
Global status
Design Code
Footing type
Column type
:
:
:
:
OK
ACI 318-05
Spread
Concrete
Geometry
Length :
3.00 [m]
Width :
2.00 [m]
Thickness
:
0.45 [m]
Base depth
:
1.50 [m]
Base area
:
6.00 [m2]
Footing volume :
2.70 [m3]
Column length :
Column width :
30.00 [cm]
30.00 [cm]
Centered
Materials
Concrete, f'c :
0.21 [Ton/cm2] Steel, fy
:
Concrete type :
Normal Epoxy coated :
No
Concrete elasticity modulus
:
219.50 [Ton/cm2]
2038.89 [Ton/cm2]
Unit weight
:
2.40 [Ton/m3]
Soil
Modulus of subgrade reaction :
3150.00 [Ton/m3]
4.22 [Ton/cm2]
Steel elasticity modulus :
1.75 [Ton/m3]
Footing reinforcement
Free cover
:
8.00 [cm]
Maximum Rho/Rho balanced ratio
Bottom reinforcement // to L (xx)
Bottom reinforcement // to B (zz)
Bottom reinforcement // to B (zz)
Bottom reinforcement // to B (zz)
Dowel bar size
Rebar 1 :
8-#6
Free cover
:
2.50 [cm]
Development length calculated :
Bars number // to x axis
:
Bars number // to z axis
:
Stirrups :
#3 @ 20.00cm
Legs number // to x axis
:
Legs number // to z axis
:
:
:
:
:
:
0.75
9-#5 @ 23.00cm
2-#5 @ 42.00cm (Zone 1)
10-#5 @ 22.00cm (Zone 2)
2-#5 @ 42.00cm (Zone 3)
in tension
3
3
2
2
Axial Mxx
[Ton*m]
Mzz
Vx
[Ton*m]
Vz
[Ton]
[Ton]
RESULTS:
Status :
OK
Soil.Foundation interaction
Allowable stress
:
1.5E04 [kg/m2]
Min. safety factor for sliding :
1.25
Min. safety factor for overturning
:
1.25
Minimum safety factor for bearing capacity (uplift)
2.50
Controlling condition :
SC1
Safety factor for bearing capacity (uplift)
1000.00
Condition
qmean qmax Dmax
Overturning
FS
[kg/m2]
[kg/m2]
[cm]
Area in compression
SC1
100
1000.00
Dist1
[cm]
Dist2
[cm]
6.00
[m2]
(%)
FSx
FSz
1000.00
slip
1000.00
Bending
Factor f :
0.90
Min rebar ratio :
Development length
Axis
Pos.
0.00180
ld
[cm]
lhd
[cm]
zz
xx
Bot.
Bot.
Axis
Pos.
Condition
Mu
[Ton*m]
zz
zz
xx
xx
Top
Bot.
Top
Bot.
DC1
DC1
DC1
DC1
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
24.02
0.00
35.63
Factor f :
0.75
Shear area (plane zz)
Shear area (plane xx)
:
:
0.72 [m2]
1.04 [m2]
Plane Condition
[Ton]
Vu
[Ton]
Vc
xy
79.99 0.000
0.00
18.00
0.00
28.00
Shear
DC1
0.00
Vu/(f*Vn)
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
yz
DC1
0.00
55.77 0.000
Punching shear
Perimeter of critical section (b...
:
Punching shear area :
0.91 [m2]
Column Condition
[Ton]
Vu
[Ton]
Vc
column 1
0.00
140.76 0.000
DC1
2.60 [m]
Vu/(f*Vn)
Notes
* Soil under the footing is considered elastic and homogeneous. A linear soil pressure variation is
assumed.
* The required flexural reinforcement considers at least the minimum reinforcement
* The design bending moment is calculated at the critical sections located at the support faces
* Only rectangular footings with uniform sections and rectangular columns are considered.
* The nominal shear strength is calculated in critical sections located at a distance d from the
support face
* The punching shear strength is calculated in a perimetral section located at a distance d/2 from
the support faces
* Transverse reinforcement is not considered in footings
* Values shown in red are not in compliance with a provision of the code
*qprom = Mean compression pressure on soil.
*qmax = Maximum compression pressure on soil.
*Dmax = maximum total settlement (considering an elastic soil modeled by the subgrade reaction
modulus).