Professional Documents
Culture Documents
Halaman 1 nomor 2
H **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _.erase 1 found
Command:
Command:
Command: _-VIEW Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _RIGHT
Command:
Command:
Command: _-VIEW Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _FRONT
Command: ucs
Current ucs name: *FRONT*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis]
<World>:
Command:
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: reg
REGION
Select objects: None found.
Command: Specify opposite corner:
Command: REGION
Select objects: None found.
Command: REGION
Select objects: Specify opposite corner: 6 found
Select objects:
1 loop extracted.
1 Region created.
Command:
Command:
Command: _-VIEW Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _SEISO
Command: ucs
Current ucs name: *WORLD*
Specify origin of UCS or [Face/NAmed/OBject/Previous/View/World/X/Y/Z/ZAxis]
<World>:
Command:
Command:
Command: _-VIEW Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _NWISO
Command: Specify opposite corner:
Command: *Cancel*
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
Select objects to extrude or [MOde]: _MO Closed profiles creation mode
[SOlid/SUrface] <Solid>: _SO
Select objects to extrude or [MOde]: 1 found
Select objects to extrude or [MOde]:
Specify height of extrusion or [Direction/Path/Taper angle/Expression]
<0.7600>: 52
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=4, Closed profiles creation mode = Solid
Select objects to extrude or [MOde]: _MO Closed profiles creation mode
[SOlid/SUrface] <Solid>: _SO
Select objects to extrude or [MOde]:
Command:
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
Layer = Yes
Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
<1>: 1 INTELLIPAN INTELLIZOOM INTELLIZOOM INTELLIZOOM
Command:
Command:
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
Layer = Yes
Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
<1>: 1 UCS
Command:
Command:
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
Layer = Yes
Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
<1>: 1 VSCURRENT GROUP Regenerating model.
Command:
Command:
Command: _.undo Current settings: Auto = On, Control = All, Combine = Yes,
Layer = Yes
Enter the number of operations to undo or [Auto/Control/BEgin/End/Mark/Back]
<1>: 1 SUBTRACT
Command:
Command: ro
ROTATE
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
1 found
Specify base point:
Specify rotation angle or [Copy/Reference] <0>: *Cancel*
Command: ucs