Professional Documents
Culture Documents
Overview
This application provides a single interface to dynamically add, delete and configure WSN nodes on the NI 9792 or NI 9795 gateway.
Table of Contents
1. Dynamically Add, Delete and Configure WSN Nodes on the NI 9792
Application Architecture
The Real-Time application architecture is based on a state machine and provides a remote front panel that is accessible over the network. We used both WSN Gateway and WSN Node references
to add/delete WSN nodes on the NI 9792. The application also uses the NI Shared Variable Enginge (SVE) I/O Variables to configure each connected node. The application logs the WSN node
configuration so that nodes can be automatically re-configured in case of reboot.
In addition to using the SVE I/O Variables, data from analog and digital I/O from the WSN nodes can be obtained using the NI Publish-Subscribe Protocol (NI-PSP). The SVE uses the data transfer
protocol to write and read live data. The base URL for acquiring data is in the following format:
ni.var.psp://<IP address or localhost>/<Node>....
From this URL address data variables can be obtained in different application running over the network.
1/1
www.ni.com