You are on page 1of 4

INSTITUTO POLITCNICO NACIONAL

ESCUELA SUPERIOR DE INGENIERA MECNICA Y ELCTRICA


UNIDAD CULHUACAN

PROBLEMARIO 1 ECUACIONES FUNDAMENTALES


DINMICA DE LA PARTCULA
PROBLEM 11.3 BEER 7th EDITION
The motion of the slider A is defined by the
relation x = 20 sin kt, where x and t are
expressed in inches and seconds, respectively and k
is

constant.

determine

the

Knowing
position,

that
the

10

velocity

rad/s,

and

the

acceleration of slider A when t = 0.05 s.


PROBLEM 11.3 BEER 10th EDITION
The

vertical

motion

of

mass

is

defined by

the

relation

x = 10 sin 2t + 15 cos 2t + 100, where x and t are expressed in


millimeters and seconds, respectively. Determine a) the position,
velocity and acceleration of A

when t = 1 s, b) the maximum

velocity of A.
PROBLEM 11.8 BEER 10th EDITION
The motion of a particle is defined by the relation x = t 3- 6t2 36t 40, where x
and t are expressed in feet and seconds, respectively. Determine a) when the velocity
is zero, b) the velocity, the acceleration, and the total distance traveled when x = 0.
PROBLEM 11.13 BEER 10th EDITION
The acceleration of point A is defined by the

relation

a = -1.8 sin kt, where a and t are expressed in


seconds, respectively and k = 3
and v = 0.6

and

. Knowing that x = 0

when t = 0, determine the

velocity

and position of A when t = 0.5 s.


ELABOR: PROF. GILBERTO ANDRS SNCHEZ RODRGUEZ MARZO 2015

PROBLEM 13.2 BEDFORD 4th EDITION


The milling machine is programmed so that the
position of its head is given as a function of time
by

s = 0.3 0.2 cos (5t) m.

(When t is in

seconds, the argument of the cosine is in radians.)


a)

Determine the velocity of the head as a

function of time.
b) What is the acceleration of the head at
t = 4 s.
PROBLEM 13.8 BEDFORD 4th EDITION
The rotating crank causes the position of point P as function of time to be
s = 0.4 sin (2t) m.
a) Determine the velocity and acceleration of P at t = 0.375 s.
b) What is the maximum magnitude of the velocity of P?.
c) When the magnitude of the velocity of P is a maximum, what is the acceleration
of P?

PROBLEMA 13.4

WILLIAM F. RILEY

Se da, en funcin del tiempo, el desplazamiento de un punto que se mueve a lo


largo del eje X.

s ( t ) = 4 sen t ( m )
a. Calcular la velocidad del punto en funcin del tiempo.
b. Calcular la aceleracin del punto en funcin del tiempo.
c. Evaluar la posicin, velocidad y aceleracin del punto en

t = 5 s.

d. Determinar la distancia total recorrida por el punto entre t = 0 y t = 5 s.


e . Representar grficamente s t, v t y a t; para 0 t 10 s

ELABOR: PROF. GILBERTO ANDRS SNCHEZ RODRGUEZ MARZO 2015

PROBLEMA 13.8 WILLIAM F. RILEY


v (t) = 8t2 - 20 ( m/s )
s (20) = 60 m
Se da, en funcin del tiempo, la velocidad de un punto que se mueve a lo largo del eje
X; se da su desplazamiento en cierto instante.
a. Calcular la posicin del punto en funcin del tiempo.
b. Calcular la aceleracin del punto en funcin del tiempo.
c. Evaluar el desplazamiento, velocidad y aceleracin del punto en t = 8 s.
d. Determinar la distancia total recorrida por el punto entre t = 5 s y t = 8 s.
e. Representar grficamente s - t, v - t y a t ; para

PROBLEMA 13.13

0 t 10 s.

WILLIAM F. RILEY

Se da, en funcin del tiempo, la aceleracin de un punto que se mueve a lo largo del
eje X;

se dan el desplazamiento y velocidad de dicho punto en cierto instante.


a (t) = 5-3t ( m/s2 )
s (0) = 5 m
v (0) = 0 m/s

a. Calcular la posicin del punto en funcin del tiempo


b. Calcular la velocidad del punto en funcin del tiempo
c. Evaluar el desplazamiento, la velocidad y aceleracin del punto en t = 3 s.
d. Determinar la distancia total recorrida por el punto entre t = 3 s y t = 8 s.
e. Representar grficamente x t, v t y a t

para

0 t 10 s.

ELABOR: PROF. GILBERTO ANDRS SNCHEZ RODRGUEZ MARZO 2015

PROBLEMA 13.16

WILLIAM F. RILEY

Se da, en funcin del tiempo, la aceleracin de un punto que se mueve a lo largo del
eje X;

se dan el desplazamiento y velocidad de dicho punto en cierto instante.


a ( t) = 20 sen 2t

( m/s2 )

s (10) = 0 m
v (10) = 5 m/s
a. Calcular la posicin del punto en funcin del tiempo
b. Calcular la velocidad del punto en funcin del tiempo
c. Evaluar el desplazamiento, la velocidad y aceleracin del punto en t = 3 s.
d. Determinar la distancia total recorrida por el punto entre t = 3 s y t = 8 s.
e. Representar grficamente x t, v t y a t

para

0 t 10 s.

ELABOR: PROF. GILBERTO ANDRS SNCHEZ RODRGUEZ MARZO 2015

You might also like