Professional Documents
Culture Documents
Other Equipment usually comprises of Individual Water heaters, Television sets, lighting etc.
For Sustainability
Operating the Air Conidtioners compressor after thermal saturation point is achieved inside the room.
Excess Cooling due to Hysteresis / intentional 1 degree difference in set temperature and actual cutoff temperature.
Thermal Saturation Point : In simple words it can be explained as an occurrence of a state when the air
conditioners compressor continues to operate inspite of the room temperature not being able to drop further below
a particular temperature point. This point is the thermal saturation point of the room and it is always changing, and
never constant. ( Refer FAQ of PSAC for more details)
Thermal saturation can be explained with an ideal example of boiling water. The Thermal Saturation point of water
is 100C. Thereafter whatever heat is supplied to the water is wasted and temperature of water does not rise
beyond 100 C even if the Gas is kept on full power. At this point of time only a little heat energy is required to
maintain the temperature of water at 100C. Even if the Gas is turned OFF and Turned ON again in few minutes, the
Water achieves the boiling point in almost no time.
Similarly when an air conditioned room achieves its thermal saturation point, it is meaningless to operate the
compressor of the Air Conditioner thus resulting in increased electricity consumption. Sometimes faulty thermostats
also result in non stop operation of the compressor there by resulting in increased electricity consumption. Also this
prevents the compressor from going into infinite operation cycles there-by increasing the life and reducing the wear
and tear of the compressor.
Note: The Thermostat inside the air conditioner only senses whether the set temperature is reached. It does not detect
the thermal saturation point.
This 1 or 2 degree difference makes the compressor work extra for about 5 to 10 minutes extra on an average in each
cycle. Such accumulated extra operation events results to about approximately 1 hour of extra operation time.
This experiment can be conducted and observed by any lay man, by placing a Digital Thermometer in the Air Conditioned
room.
This is the main reason, why we sometimes experience chills even if the set temperature is slightly higher.
Also Faulty thermostats/ clogged / dusty thermostats tend to create excess chills due to improper sensing mechanism.
The power saver for Air Conditioner is 100% designed & manufactured in INDIA by Om
Energy Savers.
It primarily saves energy by adopting the two concepts explained in the previous page,
i.e.
A) Thermal Saturation Prevention Technology , including Thermostat Failure protection/
B) Excess cooling prevention technology.
It saves about from 10% upto 40% Energy depending on model or PSAC and other
influencing factors.
For More information kindly read our Frequently Asked Questions.
Some of our precious customers who have tried & tested our
Power Saver for Air Conditioner.
HPCL
BPCL
SIEMENS
Mahindra & Mahindra Nasik Vehicle Plant
Johnson & Johnson
Asian Paints
Aditya Birla group
Suzlon Energy
Max Life Insurance Co Ltd
CASTROL . and many more.
Comparison & Technical Data of different models of Power Savers for Air Conditioner
FEATURES
ACSECO -01
ACSFIXS-01
ACSFLS-01
ACSFLSLCD-01
ACSCUS-01
ACS-ECO
ACS-HTS
ACS-MAX
ACS-MAX-LCD
ACS HC 01
2) OPERATING VOLTAGE
UPTO 2 TONNE
UPTO 2 TONNE
UPTO 2 TONNE
UPTO 2 TONNE
NO
NO
CUSTOMISED
CUSTOMISED
CUSTOMISED
SMART CYCLE
THERMAL SATURATION
NO DISPLAY
NO DISPLAY
NO DISPLAY
YES
YES
10 to 15 %
15 to 25 %
15 to 35 % or More
15 to 35% or More
15 to 35 % or More.
8)
YES , LED
YES, LED
YES, LED
LCD DIDPLAY
LCD DISPLAY
MICROCONTROLLER
CHIP
MICROCONTROLLER
CHIP
MICROCONTROLLER
CHIP
MICROCONTROLLER
CHIP
MICROCONTROLLER
CHIP
NO
NO
NO
YES
At Additional Cost
YES
At Additional Cost
8 to 12 MONTHS
6 to 10 MONTHS
6 to 8 MONTHS
6 to 8 MONTHS
3 to 6 MONTHS
2 YRS
2 YRS
2 YRS
2 YRS
3 YRS
1) MODEL NO
INDICATORS
9 ) DESIGN BASE
THERMAL SATURATION
AND EXCSS COOLING
PREVENTION
THERMAL
SATURATION & EXCSS
COOLING PREVENTION
THERMAL SATURATION
AND EXCSS COOLING
PREVENTION
Seeing is Believing!
Note: Demos free within Mumbai City and Suburbs Only. Out station demos may be chargeable.