Professional Documents
Culture Documents
1) Mechanical Properties
Item
Asf
Value
Tensile
Strength
Elongatio
n at Bank
Youngs
Modulus
MD
TD
MD
TD
MD
TD
23
24
120
110
450
500
KG/MM2
KG/MM2
%
%
KG/MM2
KG/MM2
25C
Impact
strength
Tear
Strength
35
KG/CM2
25C
Bursting
Strength
Folding
Enduranc
e
Unit
MD 14.6
TD
15
505
KG/CM
15X1
0
Cycles
Test
condition
Test method
ASTMD882A
Atmosph
ere
Atmosph
ere
25C
ASTMD1709
ASTMD1922
ASTMD1922
ASTM-D774
MIT
Method
ASTMD2176
MOPLATEC GmbH
MODERN PLASTIC TECHNOLOGY
Item
value
Unit
Test
Test
Condition Method
Density
1.4
G/m2
25C
ASTM-D1505
Water Absorption
0.45
25C,24hr
Astm-D570
Water Vapor
Permeability
23
G/m2/24hr
40C,90% RH
ASTM-E96
Oxygen Permeability
45
Cc/m2/24hr/atm
24c,1 atm
ASTM-D1434
3) Thermal Properties
Item
value
Unit
Test
Condition
Test
Method
Melting point
1.4
G/m2
25C
ASTM-D1505
Heat
Shrinkage
1.5
0.5
3x10
150 C/30min
ASTM-D2305
10-50 C
10-50 c
ASTM-D696
3x10
0.32
25 C
25 C
MD
TD
Thermal Expansion
Coefficient
Thermal Expansion
Coefficient
Specific Heat
MOPLATEC GmbH
MODERN PLASTIC TECHNOLOGY
Hagenberg 10 D 07989 TEICHWOLFRAMSDORF - GERMANY
Tel.: +49 (0) 36624 22 55 7
Fax: +49 (0) 36624 22 55 8
Handy:
+49 (0) 151 587 430 33 e-mai: neumannerich@tonline.de
4) Optical Properties
Item
Refractive
Total
Luminous
Transmission
Index Haze
1.65
nD
Test
Method
25 C
ASTM D542
25C
ASTM D542
MOPLATEC GmbH
Extinguishing Media: Water Spray, Carbon Dioxide, Dry Chemical, Halogenated Agents.
Special Fire Fighting Protective Equipment: Self-contained breathing apparatus with full piece
and protective clothing.
Unusual Fire and Explosion Hazards: Film remaining in contact with flame will Ignite and
continue to burn slowly, dropping flaming liquid, which can spread the fire. If the flame source is
stationary, the fire will shrink away and self-extinguish.
7) Reactive Data
Stability: Stale under normal considers.
Incompatibility (Materials to Avoid): Not applicable.
Hazardous Decomposition Products: combustion products: Carbon Dioxide, Carbon
Monoxide, terephthalic Acid, Aldehdes
Hazardous Polymerization: Will not occur
Health Hazard Assessment
8) General
The health Hazard assessment is based on an evaluation of the chemical composition together
with information from a search of the scientific literature and other commercial sources
9) Ingestion
Not suitable for human consumption
MOPLATEC GmbH
MODERN PLASTIC TECHNOLOGY
Hagenberg 10 D 07989 TEICHWOLFRAMSDORF - GERMANY
Tel.: +49 (0) 36624 22 55 7
Fax: +49 (0) 36624 22 55 8
Handy:
+49 (0) 151 587 430 33 e-mai: neumannerich@tonline.de
Wash material off the skin with plenty of soap and water. If redness, itching or a burning
sensation develops, get medical attention.
13-2-b) Eye
Immediately flush with plenty of water. After initial flushing continue flashing for at least
15 minutes if redness, itching or a burning sensation develops, have eye examined and
treated by medical personnel.
13-3-c) Ingestion
Give one or two glasses of water to drink. If gastrointestinal symptoms develop consult
medical personnel.
13-4-d) Inhalation
Remove victim to fresh air. If cough or other respiratory Systems develop, consult
medical personnel.
MOPLATEC GmbH
2)
Ventilation:
Local Exhaust: Not applicable
Other: Not applicable
3)
4)
5)