Professional Documents
Culture Documents
Country:
PHILIPPINES
Date of Birth: April 15, 1969
Civil Status:
Married
Over all in charge of all electrical and mechanical works inside the factory.
Maintaining all electrical equipments such as motors, control system, hydraulic and
pneumatic press machine, roller press machine, electric irons, power distribution to
equipments, lighting and generator
Perform PMS regularly, trouble shoots and repairs of all electrical and mechanical
equipments.
Maintaining good condition of all sewing and fabric cutting machines. Also perform operation
breakdown and machine lay out in the production area.
Install and maintain air-conditioning systems both window, split and centralized units,
brand-new and second-hand.
Maintain fire alarm system, sprinklers, smoke and heat detectors and pumps. Also computer
literate.
Performs Air-conditioning Installation such as window type, Split type, Split concealed
(AHU), and centralized Units.
Trouble shoots and repairs of all electrical, refrigeration and air conditioning equipments.
Over all in charge of all electrical and mechanical works inside the hotel.
Maintaining all electrical equipment such as pumps and automation, laundry machines,
dryers, boilers and water heater.
Maintaining all ventilation, refrigeration and air-conditioning systems from 1 ton to 25 ton of
capacity.
Maintaining fire alarm system and sprinklers smoke and heat detectors, CCTV camera and
surveillance system, cable TV networking, LAN networking, computer equipments, telephone
PABX and trunk lines, audio and video systems and elevator (OTIS).
Maintaining all electrical equipments and machineries to their proper conditions by applying
PMS (Preventive Maintenance Schedules).
1. All air-conditioning systems from window, split, concealed (AHU) to centralize ranging
from 1.5 to 20 toner capacity of different products like Bryant, LG, Carrier, Daiken, Mitsubishi
Daiya, Mitsubishi Electric and Trane.
2. All carpentry machineries such as band saw, circular saw, plainer, routers, power tools,
and pneumatic and hydraulic machines.
3. All factory machineries such as GGT (Gerber Cutting Edge) for computerized cutting
machine and spreaders, Eton system for computerized station to station delivery of work
piece, Tajima embroidery machine, Meyer hydraulic and pneumatic presses, roller press
4. All auxiliary installation such as telephone system, LAN networking, Fire alarm system,
CCTV camera and surveillance system, Paging system and remote networking.
1. Planning and installation of all electrical works from cable tray, cable trench, cable pulling,
Switch Gear/MDP/LDP/EDP/ and panel board. Termination of cables, fixture and devices.
2. Installation of Fire alarm system such as Main pump of about 75 hp and jockey pump,
Plumbing works and sprinkler, smoke and heat detectors, bell and break glass, emergency
back up lights and emergency exit doors.
3. Installation of heating system such gas fired boilers, electrical heated boilers from 5 tons
to .5 ton, plumbing works and Insulation, check and gate valves, steam traps, thermostats,
safety relief valves and cut-in/cut-out pressure switch.
4. Installation all Air-conditioning system such as window, split type, split concealed (AHU)
type, and centralize type ranging from 2tons to 30 tons of capacity from Mitsubishi Electric
and Trane products.
5. Installation of PABX telephone system using Netsuko, Meridian and Panasonic products,
networking system (LAN) using Cisco products, CCTV and camera surveillance system
using Sanyo products, PA system, Cable TV networking, Audio and Video set ups.
Trouble shoots and repairs of all electrical installation, fixture mountings and conversion from
right hand to left hand drive.
Maintaining all electrical equipments such as motors, hoist chain, hydraulic and pneumatic
press machine, roller press machine, power distribution to equipments, lighting and
generator
Perform PMS regularly, trouble shoots and repairs of all electrical equipments.
Planning and installation of vertical and horizontal cable tray, cable trench, and make cable
pulling.
Installation or mountings of drive motors and termination of cables, run test prior for
directional rotation.
Installation of control, signal control and over load controls. Trouble shoots and repairs of all
electrical equipments.
Also conduct auto electrical for light and heavy equipment vehicles such as prime movers
and cranes.
employees
JOB TITLE...Maintenance Foreman
DUTIES & RESPONSIBILITIES:
Maintaining all electrical equipments such as motors, boilers and control system, hydraulic
and pneumatic press machine, roller press machine, electric irons, power distribution to
equipments, lighting and generator
Perform PMS regularly, trouble shoots and repairs of all electrical equipments.
Maintain all air-conditioning systems window, split and centralize units. Also install brand
new units.
Install fire alarm system, sprinklers, smoke and heat detectors and pumps. Also computer
literate.
Planning and lay outing of vertical and horizontal cable trays, cable trench, make cable
pulling, installation of control and signal panel, and termination of control cable.
Installation of drive motors for conveyors
Planning and installation of horizontal and vertical cable trays, cable trench, make cable
pulling.
Installation of control, senders, signal panels and termination of control cable to their
respective block inside the control room.
Finish project of two 27 MW gas turbine in National Power Corporation at Naga, Cebu
Planning lay outing of cable trays, cable trench, cable pulling for electrical equipments,
power outlets and lighting.
Installation of service entrance, powerhouse, and double throw, MDP/LDP/EDP and branch
panel. Dry type transformer, back up generator,
Termination of low and high voltage and grounding system.
Installation of fire alarm system both smoke and heat detectors. Installation of street lighting.
Finish project of the Sister of Mary Girls town in talisay city, Cebu.
Hydraulic cutter and crimpier, wire/cable stripper, pliers, set of screw drivers.
Gauge manifold, recovery units, oxy/acy gas weld, arc welding, flaring tools,
Title :
Mobile Air-conditioning Technician
Date :
May 02, 2006 at TESDA Minglanilla, Cebu
Country: Minglanilla, Cebu Philippines
Certificate No. : 721-2006-205
Title
Title
Title
SPECIAL SKILLS
Installation and troubleshooting
COMPUTER SKILLS INCLUDING SOFTWARE
Literate, Microsoft Office
LANGUAGE SKILLS
English and Arabic