Professional Documents
Culture Documents
PROJECT II
Civil constructions
DESIGN SUBJECT:
---
Sl.Dr.Ing.RaduPESCARU
Sl.Dr.Ing.IainaBARAN
2010 - 2011 - -
PROJECT THEME
The project consists in some elements of design for a building that can have one of the following
destinations:
- block of flats; hotel; students accommodation building.
The building has UG+G+4Fl and it is placed in urban area on a land with the natural slope of 2%and
connected to the city services facilities.
The structure will have:
- pedestrian or non pedestrian reinforced concrete flat roof;
- monolithic or precast reinforced concrete shear walls combined with lamellar frames;
- reinforced concrete floor slabs and stairs;
- elastic cross beam or mat concrete foundations under the load bearing walls and columns.
The envelope of the building consists of:
- load-bearing walls of reinforced concrete or non load-bearing walls of hollow brick or cellular concrete
block masonry protected on the external face with al layer of efficient thermo insulating materials
(fireproofed expanded polystyrene for face wall, mineral wool rigid plates, extruded polystyrene etc.);
- ventilated or un-ventilated could (insulated) terrace roof;
- the ground floor plate over unheated basement will be insulated on the ceiling of the basement;
- The doors and windows can be of multi-layer wood or PVC profiles with thermal insulating double or
triple glassed window panels with Low CTE float glass. The windows will be provided with ventilating
systems or with three opening positions in order to provide a adequate thermal protection and natural
ventilation of the indoor space;
- the staircase is insulated and heated.
The project must contain information and details about:
- the type and the composition of structural and for envelope elements ( walls, columns, floors,
foundations, and roof);
- the joints of the main structural and for envelope elements;
- the heat conservation capacity of the building;
- the structural performance under the load combination that contain dead, snow, live loads and seismic action.
The thermal and structural design and the constructive details of the elements already mentioned.
The project consists of the following elements:
A. Written part :
1. The project theme;
2. Project content;
3. Technical report;
4. The design of the walls and roof for hygrothermal conditions
- the general factor of heat loos G,
- estimation of water vapour condensation risk in the envelop structure;
5. The assessment of loads and design load combination;
6. The computation of the cross shear walls sectional characteristics;
7. Stress and strain analysis for the cross shear walls.
1.
2.
3.
4.
5.
B. Drawings :
Current floor plan, scale 1/50,
Ground floor plan (building access detail), scale 1/50,
Cross section through the staircase, scale 1/50,
Roof plan, scale 1/100,
Constructive derails, plan, scale 1/5, 1/10.
References :
1.
2.
3.
4.
5.
6.