Professional Documents
Culture Documents
Supervised By
Dr. Meshaal Al-Shaher
Lab Schedule
Date
Week
Experiment Title
Quiz
From
To
1-Feb
5-Feb
8-Feb
12-Feb
15-Feb
19-Feb
1-Mar
5-Mar
8-Mar
12-Mar
15-Mar
19-Oct
First Exam
22-Mar
26-Mar
Ex5. AC Measurements
29-Mar
2-Apr
5-Apr
9-Apr
Quiz 5
10
12-Apr
16-Apr
Quiz 6
11
19-Apr
23-Apr
12
26-Apr
30-Apr
Final Exam
Grading Policy
Performance +
Pre-Lab
10%
Reports
6 Quizzes
2 Exams
Data CD
Total
15%
20%
50%
5%
100%
Pre-Lab
Report
Quiz 1
Quiz 3
Quiz 4
Report Grading
Policy
Cover
Table of Contents
Objective
Equipment
Theory
Procedure + Circuit
Data Sheet
Exercise
Conclusion
References
Report Format
Total
1
1
2
1
5
3
2
15
Lab Regulations
1) Performance & Pre Lab: (10 points)
PSpice simulation report (student name and ID must be typed, otherwise will be
discarded)
Find Data Sheet at the end of each experiment. Theoretical part should be filled in
and printed by computer before the lab.
Note: Lab engineer has to sign the pre lab note before students leave the lab.
Students have to leave the bench clean and switch all the equipments off before
leaving the lab.
Food and drink is not allowed in the labs.
3) Attendance
Students should attend the lab in time. Late students will not be allowed to attend
the lab and will get zero mark for (Pre Lab Note, Performance, Quiz and Report).
Students can attend in their section only, no switching between labs will be
allowed for any reason.
Absent students for 3 out of 10 labs or more will get FA.
Absence of Final Exam = FA
4) Report Layout:
A typical lab report should contain the following sections (in order), you can
download the report sample from the site:
Cover Page
Table of Contents
Objective
Theory
Experimental Procedure + Exercise
PSpice Simulation
Data Sheet
Conclusion
References
.
Writing techniques:
Report and Pre Lab note should be written by computer.
The font and size of the normal text is TimesNewRoman 12.
The font and size of the heading and subheading is TimesNewRoman 16/14.
The report should contain page numbers.
All figures and tables should have a title caption.
The theory part should contain (figures, equations, description) for each part of the
objective.
Objectives
To be familiar with the laboratory equipment and components.
Verification of Ohms law.
Series and parallel circuits.
Theory
Resistor:
There are two types of resistors in the lab, resistor substitution box (from 0 to 9.999 M ) and
discrete resistors. See Figure 1-5 for the discrete resistor values reading table.
Discrete Resistors
Figure 1-3: Resistors
Example:
(a)
(b)
Figure 1-6: Color code example
a)
For the resistor of figure 1-6-a, the value can be calculated as follows:
N 1N 2 N 3 N 4
Where:
Ni = band value.
+ 10%
For the resistor of figure 1-6-b, the value can be calculated as follows:
N1 N2 N3 N4
N5
Where:
Ni = band value.
+ 0.1%
Inductor:
There is inductance substitution box in the lab (from 0 to 9.999 H).
Capacitor:
There is capacitance substitution box in the lab (from 0 to 99.999 uF).
Bread Board:
It is a board to connect the circuits.
I R
(1)
I
1/R
V
Circuit Diagram
PSpice Simulation
Part I:
2.4mA
2.0mA
1.6mA
1.2mA
0.8mA
0.4mA
0A
0V
0.5V
1.0V
1.5V
2.0V
2.5V
3.0V
3.5V
4.0V
4.5V
5.0V
5.5V
6.0V
6.5V
7.0V
7.5V
8.0V
8.5V
9.0V
9.5V
10.0V
I(R1)
V_Vs
Part II:
I
(a)
I
(b)
Figure 1-15: Circuit Diagram
1) Start PSpice [Appendix A-1]
2) Add Resistors [Appendix A-2] R1= R2=2K, R3=3.9 K, R4= R5=2K
3) Add DC Voltage Source (Vs) [Appendix A-5] Vs = 10 V
4) Add Ground [Appendix A-11]
5) Connect the circuit by adding wires [Appendix A-10]
6) Simulate the circuit [Appendix A-13]
7) Calculate the equivalent resistor.
R AB1 =
R AB2 =
Experimental Work
Equipments:
1) DC Voltage Source
2) Bread Board.
3) DMM
4) Discrete resistors
Procedure:
Part I : Ohms Law:
1) Select a discrete resistor R = 2 K, measure the resistor value
R=
2) Connect the circuit as shown in Figure 1-16 with the shown values.
3) Vary the DC voltage source and measure I. Fill table 1-1.
Table 1-1
VS
I (mA)
2
4
6
8
10
Q1: Draw V versus I, find the slope of the curve and what does the slope represent?.
Q2: Compare the slope of Q1 with the theoretical value. %error
Q3: What are the error sources in Q2?
10
Theoritical Measured
100
Theoritical
(a)
B2
A
(b)
Figure 1-17: Circuit Diagram
1) Connect the circuit as shown in Figure 1-17-a, R1= R2=2K, R3=3.9K, R4= R5=2K,
Measure RAB1. RAB1=
2) Connect the circuit as shown in Figure 1-17-b, R1=1K, R3=3.9K, R2=1K.
Measure RAB2.
RAB2=
11
Objectives
Verification of KVL and KCL.
Simulating the DC circuits using PSpice.
Measuring and calculating the equivalent resistance of different circuits.
Theory
12
R ab
R1 R 2 ... R N
1
R ab
Rn
n 1
Series Connection
1
R1
1
R2
1
...
RN
N
n
1
1 Rn
Parallel Connection
Why conversions
13
PSpice Simulation
L2
L1
I3
I2
I1
-
L3
L4
I2
14
I3
10K
1K
1K
5.1K
5.1K
3.9K
3.9K
Rab ==
15
Experimental Work
Equipment:
1) DC Voltage Source
2) Bread Board.
3) DMM
4) Discrete resistors.
R2
R3
R4
R5
2) Connect the circuit shown in Figure 2-5, adjust V1 = 12 V and V2 = 8 V using DMM.
3) Fill table 2-3.
Table 2-3
VR1
VR2
VR3
VR4
VR5
I1
I2
I3
Q1: Using the measured values of table 2-2 and 2-3, verify KVL for closed loops L1, L2, L3 and L4.
Loop L1:
Loop L2:
Loop L3:
Loop L4:
16
Q2: Using the measured values of tables 2-2 and 2-3, verify KCL at node A.
1K
5.1K
5.1K
3.9K
3.9K
Rab =
Q4: Find Rab theoretically in details (step by step with figures) and compare it with measured value
in step 2 and the simulated value by PSpice.
17
Objectives
Verification of Nodal analysis method.
Verification of Mesh analysis method.
Verification of Superposition technique.
DC circuits analysis using PSpice.
Theory
Nodal Analysis
Analysis Steps:
1. Select a node as the reference node. Assign voltages v1, v2,, vn-1 to the remaining n1
nodes. The voltages are referenced with respect to the reference node.
2. Apply KCL to each of the n1 non reference nodes. Use Ohms law to express the branch
currents in terms of node voltages.
3. Solve the resulting simultaneous equations to obtain the unknown node voltages.
Example:
V N 1 V1 V N 1 V N 1 V N 2
R1
R3
R2
VN 2 V2 VN 2 VN 2 VN1
R5
R4
R2
0
0
18
Mesh Analysis
A mesh is a loop which does not contain any other loops within it.
Analysis steps:
1. Assign mesh currents i1, i2, . . . , in to the n meshes.
2. Apply KVL to each of the n meshes. Use Ohms law to express the voltages in terms of the
mesh currents.
3. Solve the resulting n simultaneous equations to get the mesh currents.
Example:
Superposition technique:
The superposition principle states that the voltage across (or current through) an element in a linear
circuit is the algebraic sum of the voltages across (or currents through) that element due to each
independent source acting alone.
Superposition steps:
1. Turn off all independent sources except one source. Find the output (voltage or current) due
to that active source using nodal or mesh analysis.
2. Repeat step 1 for each of the other independent sources.
3. Find the total contribution by adding algebraically all the contributions due to the independent
sources.
Example:
For the circuit shown in Figure 3-1, to find IR1 using super position:
19
Disconnect the voltage source V2 and replace it with a wire (short circuit it) as shown in
Figure 3-3-a.
Solve for IR1.
Disconnect the voltage source V1 and replace it with a wire (short circuit it) as shown in
Figure 3-3-b.
Solve for IR1.
IR1 = IR1 + IR1
IR1
IR1
(a)
(b)
PSpice Simulation
Connect the circuit as shown in Figure 3-4 by the following steps:
L4
L1
L3
L2
C
Figure 3-4: Circuit Diagram
1) Start PSpice [Appendix A-1]
2) Add a Resistor [Appendix A-2], R1=1K , R2=2K , R3= 3.9K , R4= 5.1K , R5=2K ,
R6=1K , R7=2K
3) Add DC Voltage Source (Vdc) [Appendix A-5], V1 = 15 V and V2 = 12 V.
4) Add Ground [Appendix A-11]
20
Table 3-1
IR5
IR3
IR7
IR4
VA
VB
VC
"
Experimental Work
Equipments:
5) DC Voltage Source
6) Bread Board.
7) DMM
8) Discrete resistors.
21
Table 3-4
R1
R2
R3
R4
R5
R6
R7
b. Connect the circuit shown in Figure 3-4, adjust V1 = 12 V and V2 = 12 V using DMM.
c. Fill table 3-5.
Table 3-5
IR5
IR3
IR7
IR4
VA
VB
VC
Q1: Using the measured values of table 3-4 and 3-5, verify Nodal equations for A and B.
Node A:
Node B:
Q2: Using the measured values of table 3-4 and 3-5, verify Mesh equations.
Mesh L1:
Mesh L2:
Mesh L3:
Mesh L4:
1) Deactivate the voltage source V2, measure and fill table 3-6 for and 3
"
2) Deactivate the voltage source V1, measure and fill table 3-6 for " and 3
"
22
"
3
Objectives
Verification of Thevenins Theory.
Verification of maximum power condition.
Determination of Thevenins Eq. Circuit using PSpice.
Theory
Thevenins Theory
Thevenins theorem states that a linear two-terminal circuit can be replaced by an equivalent circuit
consisting of a voltage source VTh in series with a resistor RTh, where VTh is the open-circuit voltage
at the terminals and RTh is the input or equivalent resistance at the terminals when the independent
sources are turned off.
(1)
23
transfer
of RL
Figure 4-2: Maximum Power Circuit
PSpice Simulation
Connect the circuit as shown in Figure 4-3 by the following steps:
I
x
y
24
mA
B) Finding RTH
1) Change the value of RL to be 1f (very small value equivalent to short circuit).
2) The circuit will be as shown in Figure 4-4.
3) Simulate the circuit [Appendix A-13]
4) Activate the voltage and current icons in the tool bar.
ISC =
mA
5) Calculate RTH
Isc
RTH
VTH
=
I SC
Q1: Using Thevenin Equivalent Circuit, calculate IRL and compare it with the value in part 1.
=
+
25
Experimental Work
Equipments:
9) DC Voltage Source
11) DMM
R2
R3
R4
2) Connect the circuit shown in Figure 4-3, adjust V1 = 12 V and V2 = 15 V using DMM.
3) Measure I.
IRL =
mA
B) Finding RTH
Remove RL and replace it with a short circuit wire.
Measure ISC.
ISC =
Calculate RTH R =
TH
mA
K
Q2: Using Thevenin Equivalent Circuit, calculate IRL and compare it with the value in part 1.
IRL =
mA
26
VTH
PRL = I2*RL
200
800
1000
1200
1500
Q3: From table 4-2, plot PRL versus RL. What is the value of RL for maximum power. Comment?
RL =
PRL MAX =
27
Objectives
To be familiar with the Digital Oscilloscope (CRO) and Function Generator (FG).
Using P-Spice to simulate AC circuit analysis.
AC measurements using CRO.
Verifying the relation between Peak-Peak value and RMS values for AC circuits.
Theory
Alternating current (AC): the flow of charge is continually changing in magnitude (and direction)
with time.
AC Basics:
VP
VPP
28
Peak Value: the peak value of a voltage or current is its maximum value with respect to zero.
Peak-to-peak VPP: is the value between minimum and maximum peaks
(1)
Where: x is v(t) or i(t).
Table 5-1: RMS equations for different waveforms
Wave Form
RMS
Sinusoidal wave
V rms
Triangle wave
V rms
Square wave
V rms
V PP
2 2
V PP
2 3
V PP
2
PSpice Simulation
Connect the circuit as shown in Figure 5-3 by the following steps:
29
4.0V
0V
-4.0V
-8.0V
0s
0.2ms
V(B)
V(A)
V(R5:2)
0.4ms
0.6ms
0.8ms
1.0ms
Time
11) Using the toggle cursor [Appendix A-19], fill table 5-2:
Table 5-2
VA PP
VB PP
VAB PP
Period T (msec)
13) Repeat the steps from 1 to 9, modify step 3 to be square wave (VPP = 10 V, Freq. = 2 KHz) as
follows:
30
1
= 0.25 msec
2 Freq .
ix. PER=
1
= 0.5 msec
Freq .
4.0V
0V
-4.0V
-8.0V
0s
V(R5:2)
0.2ms
V(B)
V(A)
0.4ms
0.6ms
0.8ms
1.0ms
Time
15) Using the toggle cursor [Appendix A-19], fill table 5-3:
Table 5-3
VA PP
VB PP
VAB PP
Period T (msec)
16) Repeat the steps from 1 to 9, modify step 3 to be triangle wave (VPP = 10 V, Freq. = 2 KHz)
as follows:
a. Add triangle wave voltage source (Vpulse) [Appendix A-9]
i. DC=0
ii. AC=0
iii. V1= -5 V
iv. V2= +5 V
v. TD= 0
31
vi. TR=
1
= 0.25 msec
2 Freq .
vii. TF=
1
= 0.25 msec
2 Freq .
viii. PW= 1f
ix. PER=
1
= 0.5 msec
Freq .
4.0V
0V
-4.0V
-8.0V
0s
0.2ms
V(B)
V(A)
V(R5:2)
0.4ms
0.6ms
0.8ms
1.0ms
Time
18) Using the toggle cursor [Appendix A-19], fill table 5-4:
Table 5-4
VA PP
VB PP
VAB PP
Period T (msec)
Experimental Work
Equipments:
1) Function Generator
2) Bread Board.
3) CRO, DMM
4) Discrete resistors.
Procedure:
Part 1:
1) Connect the circuit as shown in Figure 5-3 with: (R1=1K - R2=2K - R3=10K R4=5.1K - R5=1K)
2) Adjust the function generator to get sine wave with 10 V PP and freq. = 2 KHz.
3) Fill table 5-5 by using CRO (use the math function to get VAB).
4) Fill table 5-6 by using DMM.
32
Table 5-5
VA PP
VB PP
VAB PP
Period T (msec)
Table 6-6
IR1 RMS
VB RMS
Part 2:
6) Adjust the function generator to get square wave with 10 V PP and freq. = 2 KHz.
7) Fill table 5-7 by using CRO (use the math function to get VAB).
8) Fill table 5-8 by using DMM.
Table 5-7
VA PP
VB PP
VAB PP
Period T (msec)
Table 5-8
IR1 RMS
VB RMS
Part 3:
10) Adjust the function generator to get triangle wave with 10 V PP and freq. = 2 KHz.
11) Fill table 5-9 by using CRO (use the math function to get VAB).
12) Fill table 5-10 by using DMM.
Table 5-9
VA PP
VB PP
VAB PP
Table 5-10
IR1 RMS
VB RMS
33
Period T (msec)
Q2: Is the RMS values of the voltage or current changed by changing the wave form?
Why?
Q3: Find the RMS value for sine,square and triangle wave using general formula?
Show your work in details
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
34
Objectives
Study the natural response and step response of RL/RC circuits.
Calculate the Time Constant
Theory
When the dc source of an RC circuit is suddenly applied, the voltage or current source can be
modeled as a step function, and the response is known as a step response. The natural response or
transient response is the circuits temporary response that will die out with time. The forced response
or steady-state response is the behavior of the circuit a long time after an external excitation is
applied. The complete response of the circuit is the sum of the natural response and the forced
response.
Natural Response
+
Vo
Io
RL Circuit
RC Circuit
Figure 6-1 : RL & RC Circuit
i L (t ) i o e
, t
v C (t ) v o e
(1)
Where :
, t
0 (2)
Where:
Leq
ReqC eq
(3)
R eq
x (t ) i L (t )
(4)
for RL circuit.
(5)
35
x (t ) v C (t ) for RC circuit.
(6)
Step Response
+
Vc
-
iL
Vs
i L (t )
(1 e
R
),
V C (t ) V s (1 e
(7)
RL Circuit
),
RC Circuit
36
(8)
Time Constant : the time required for the natural response to decay by a factor of e-1 (36.8%) as
shown in figure 6-2 or the time for the step response to be 63.3% of its final value as shown in figure
6-4.
PSpice Simulation
Part A: RC Circuit
37
o
o
o
o
o
o
o
o
o
DC=0
AC=0
V1= 0
V2=10
TD= 1f
TR= 1f
TF1f
PW= 0.8m
PER= 1.6m
11. Trace the simulation [Appendix A-18] to get the time constant :
Trace expression = 6.32 which represents 63.2% of the final value to get the time
constant from the intersection of the 6.32 trace with the charging voltage.
=
10
0
0s
V(V1:+)
0.2ms
V(C1:2)
6.32
0.4ms
3.62
0.6ms
0.8ms
1.0ms
1.2ms
1.4ms
1.6ms
1.8ms
2.0ms
Time
12. Measure the value of VC at t = 0.2 msec, then verify this value theoretically by using equation
(8). Calculate the %error.
VC =
VC =
%error=
(simulation)
(theoretical)
38
Part B: RL Circuit
=
3) Measure the value of VR at t = 0.3 msec, then verify this value theoretically by using equation
(8). Calculate the %error.
VR =
VR =
%error =
(Note: i L (t )
VR
(simulation)
(theoretical)
Experimental work
Equipments:
1) Resistor, capacitor, and inductor substitution box.
2) Function Generator.
3) Digital Multi-Meter DMM
4) CRO.
39
Procedure:
Part A: RL Circuit
10
1.6m
time
%error =
%error =
40
Part B: RC Circuit
10
1.6m
Figure 6-9: Circuit Diagram
time
%error =
41
Objectives
Study the sine wave of AC voltage and current.
Measure Phase Shift between voltage and current.
Theory
Phase Shift
Phase shift is the angle between voltage and current.
Figure 7-2: Time Domain Response (Voltage and Current are in phase)
42
B) Inductor
Figure 7-6: Time Domain Response (Current lags the Voltage by angle
= 90o)
j LI
(1)
Figure 7-8: Phasor Diagram ( = 90o )
43
C) Capacitor
90o
Figure 7-10: Time Domain Response (Current leads Voltage by angle
= 90o)
1
I
j C
(2)
Figure 7-12: Phasor Diagram ( = 90o )
44
V
Figure 7-13: RL Circuit
VL
I
(j L
VR
R) I
tan
(3)
L
R
45
(4)
90
V
Figure 7-17: RC Circuit
VR
VC
1
jwC
R I
tan
(5)
1
CR
46
(6)
90
PSpice Simulation
Part A: RL Circuit
47
4.0V
3.0V
2.0V
1.0V
0.0V
-1.0V
-2.0V
-3.0V
-4.0V
0.1ms
0.2ms
0.3ms
V(R4:2)
V(V2:+)
0.4ms
0.5ms
0.6ms
0.7ms
0.8ms
0.9ms
1.0ms
1.1ms
1.2ms
1.3ms
1.4ms
1.5ms
1.6ms
1.7ms
1.8ms
1.9ms
Time
(9)
Part B: RC Circuit
48
2.0ms
3.0V
2.0V
1.0V
0.0V
-1.0V
-2.0V
-3.0V
-4.0V
2.0ms
2.1ms
2.2ms
V(V2:+)
V(R4:2)
2.3ms
2.4ms
2.5ms
2.6ms
2.7ms
2.8ms
2.9ms
3.0ms
3.1ms
3.2ms
3.3ms
3.4ms
3.5ms
3.6ms
3.7ms
3.8ms
3.9ms
Time
(10)
49
4.0ms
50
4.0V
3.0V
2.0V
1.0V
0.0V
-1.0V
-2.0V
-3.0V
-4.0V
0.1ms
0.2ms
0.3ms
V(R4:2)
V(V2:+)
0.4ms
0.5ms
0.6ms
0.7ms
0.8ms
0.9ms
1.0ms
1.1ms
1.2ms
1.3ms
1.4ms
1.5ms
1.6ms
1.7ms
1.8ms
1.9ms
Time
(9)
51
2.0ms
Experimental work
Equipments:
Resistor, capacitor, and inductor substitution boxes.
Function Generator.
Digital Multi-Meter DMM
CRO.
Procedure:
Part A: RL Circuit
Vpp/2
T
Figure 7-24: Circuit Diagram
1) Connect the circuit as shown in figure 7-23. (R= 2K) (L=200 mH)
2) Adjust the function Generator to generate sine wave with VPP =10 V, Frequency= 1600 Hz,
(Note: be sure that the function generator is adjusted to high output impedance)
3) Measure and fill table 7-1. (VL will be measured by using the math function of the CRO)
Table 7-1
Adjust
VS
VR
4) Compare
(PSpice) =
5) Compare
=2
Calculate
T (ms)
%error =
calculated with the theoretical
(theoretical) =
Note:
Measure
VL
X (ms)
calculated
spice
%)
calculated
(%error= calculated
%error =
Freq.
52
Part B: RC Circuit
Vpp/2
T
Figure 7-26: Circuit Diagram
VR
3) Compare
(PSpice) =
4) Compare
=2
Calculate
T (ms)
%error =
calculated with the theoretical
(theoretical) =
Note:
Measure
VC
X (ms)
calculated
spice
%)
calculated
(%error= calculated
%error =
Freq.
53
Vpp/2
VC PP
Measure
VR PP X (ms)
Calculate
T (ms)
54
Pf
Q2:
Vin
Vo
Pt3
0
Pt1
Pt2
X-axis value
Y-axis value
0.05 ms
0.55 ms
2. Determine the frequency of the input voltage and the output current?
3. Determine the phase shift between Vin and Vo in seconds and degrees.
4. Is the current lag or lead the input voltage? State whether the circuitis RL or RC circuit
55
Objectives
Phase shift measuring between voltage and current.
Calculation of average active, reactive, and apparent powers.
Verification of power balance in the circuit.
Improvement of power factor.
Theory
Power definitions
P: Average active power in watts.
Q: Reactive power in vars.
|S|: Apparent power in VA.
S: Complex power = P + j Q in VA.
Power factor
For
V max
, I
phase shift
I max
v
Power Factor
Phasor Diagram
I
= +ve
= -ve
56
Power triangle
S
jQ
(1)
Pf = cos( )
(2)
Q
P
P, Q, S calculations
Table 8-2
Case
Voltage Source
Equations
I
V
V max
1
V I*
2
Resistor
2
V max
2R
, I
I max
1
V max I max cos
2
2
I max
R
2
Q = 0, S = P
(4)
P=0
Inductor
2
V max
2 L
1 2
I max L
2
S=jQ
Capacitor
(3)
(5)
P=0
j
c
2
Vmax
c
2
1 2
I max
2 c
S=jQ
0,
0,
(6)
= 0.
V
I
Figure 8-2: Lagging pf
57
PSpice Simulation
58
12) Using the toggle cursor [Appendix A-19], fill Table 8-3:
Table 8-3
VPP (R1)
pf (lead/lag/unity)
Phase Shift
13) Change the value of capacitor to 0.25 uF and repeat the step 10.
14) The following wave form will be displayed in a new window:
5.0V
0V
-5.0V
6.0ms
V(L1:1)
6.2ms
V(V1:+)
6.4ms
6.6ms
6.8ms
7.0ms
7.2ms
7.4ms
7.6ms
7.8ms
8.0ms
Time
15) Using the toggle cursor [Appendix A-19], fill Table 8-4:
Table 8-4
VPP (R1)
59
Phase Shift
pf (lead/lag/unity)
Experimental Work
Equipments:
1) Function Generator
2) CRO, DMM
3) Electronic Bread Board
4) Resistor, capacitor and inductance substitution boxes.
5) Discrete resistors.
Procedure:
Part A Power Calculations:
VR1 PP
VPP (R2//L1//C1)
Table 8-6
T
T
360
pf
PV1
QV1
PR1
(lead/lag)
60
PR2
QL1
QC1
Calculate
VR1 PP
T
between V1 & VR1
61
pf
(lead/lag/unity)
Objectives
To be familiar with the protective devices for electric wiring.
To study the final circuit diagram
To study the calculation of customer electric energy cost.
Theory
The very nature of the grid system is such that power has to be transmitted over large distances. This
immediately creates a problem of voltage drop. To overcome this problem, a high voltage is used for
transmission (275 or 132 kV), the 275 kV system being known as the Super Grid. We cannot,
however, generate at such high voltages (the maximum in modern generators is 25 kV) and
transformers are used to step up the generated voltage to the transmission voltage. At the end of a
transmission line is a grid substation, where the requirements of the grid system in that area can be
controlled and where the transmission voltage is stepped down via a transformer to 132 kV. The
system voltage is then further reduced at substations to 33 000, 11 000 and 415/240 V.
415/240 V
275 KV
11000/415 V
275/132 KV
62
63
Electric Fuse:
In electronics and electrical engineering a fuse (from the Latin "fusus" meaning to melt) is a type of
sacrificial over-current protection device. Its essential component is a metal wire or strip that melts
when too much current flows, which interrupts the circuit in which it is connected. A fuse interrupts
excessive current (blows) so that further damage by overheating or fire is prevented. Wiring
regulations often define a maximum fuse current rating for particular circuits.
64
65
66
Lighting circuits
The loop-in system, this is the most common of all lighting circuitry and, as the name suggests,
circuit cables simply loop in and out of each lighting point figure 9-6.
Protective
Device Type
any
any
Maximum
Floor Area Served
75 m 2
50 m 2
67
Cable Size
4.0 m 2
2.5 m 2
Number of
Socket Outlets
unlimited
unlimited
68
69
Power Consumption
Consumers pay for the electrical energy they consume and NOT for the power. As before, the energy
is related to the power by:
Energy = Power x Time
(1)
Example 1: Consider a 1200 W hairdryer. How much does it cost per month if you use it every day
for 15 minutes? The KWh in Kuwait costs 2 fils to the consumer and approximately 20
fils to the government.
Solution: We want the number of KW times the number of hours to find the energy in KWh. The
total time per month is about 15 min/day x 30 days/month = 450 min/month. = 450/60 =
7.5 h/month. So the energy used is 1.2 KW x 7.5 h = 9 KWh. Then, the cost is 180 fils.
Example 2: A refrigerator rated at 1000 W operates one third of time. What does it cost per month?
Assume 2 fils/KWh.
Solution: 1000 W = 1 KW. The number of hours that the fridge is running is 1/3 x 24 h/day x 30
days= 240 h. So. Cost = 1 KW x 240 h x 2 fils/KWh = 490 fils.
70
Questions:
Q1: What is the function of electric fuse?
Q2: What is the function of circuit breaker?
Q3: What is the function of earth leakage circuit breaker?
Q4: A typical house contains air condition, clothes dryer, range, refrigerator, lighting and other
appliances. Complete table 9-1, given that cost for KWh is 4 fils. Calculate the bill of the house
for July.
Table 9-1 House Consumption in July
Item
Consumption
Consumption
Total
(KW)
Duration (h)
Consumption/Month
Air Condition
10
24
Clothes Dryer
Range
0.8
Refrigerator
0.5
24
Lighting
0.7
12
Total
71
Cost