Professional Documents
Culture Documents
264
Embedded Digital Video Recording systems
USER MANUAL
2012 DEC V1.2
WARNING
CAUTION
CAUTION
Make sure the voltage selector switch is set
to appropriate setting before plug in!
ii
CONTENTS
1.
2.
3.
4.
5.
6.
7.
Specification ......................................................................................................................................1
Structure of Product ..........................................................................................................................2
HDD Installation ................................................................................................................................4
System installation ............................................................................................................................5
Quick Set up Guide ...........................................................................................................................6
System Operation .............................................................................................................................8
Display mode .................................................................................................................................. 11
7.1
Live Viewing Mod ......................................................................................................... 11
7.2
Live Monitor ..................................................................................................................12
7.3
PTZ ...............................................................................................................................12
7.4
Digital Zoom .................................................................................................................14
7.5
Quick Playback .............................................................................................................15
8. Menu Operation ..............................................................................................................................17
8.1
User Login ....................................................................................................................17
8.2
The Main Menu Instructions .........................................................................................18
8.2.1
Configuration Management .................................................................................18
( 1 ) Basic Setup .................................................................................................19
( 2 ) Live (Live image).........................................................................................21
( 3 ) Recording ....................................................................................................22
( 4 ) Schedule Recording....................................................................................25
( 5 ) Alarm ...........................................................................................................27
( 6 ) Network .......................................................................................................32
( 7 ) User Management ......................................................................................35
( 8 ) PTZ .............................................................................................................36
( 9 ) Advance ......................................................................................................37
8.2.2
Data Search .........................................................................................................38
( 1 ) By Time (Data Search Playback) ................................................................38
( 2 ) By Type (Data Search Playback) ................................................................39
8.2.3
Backup .................................................................................................................39
8.2.4
Information Search ..............................................................................................40
( 1 ) System ........................................................................................................41
( 2 ) System Information .....................................................................................41
( 3 ) Network .......................................................................................................42
8.2.5
Hard Disk .............................................................................................................43
8.2.6
Firmware Update .................................................................................................43
8.2.7
User Log-out ........................................................................................................44
8.2.8
Turn Off ................................................................................................................44
8.2.9
Restart .................................................................................................................44
9. DVR Player .....................................................................................................................................45
10. IE Operation Instruction ..................................................................................................................48
10.1
IE Security setting:........................................................................................................48
10.2
IE Connection ...............................................................................................................50
10.2.1
The Main Screen Interface ..................................................................................51
10.2.2
Remote Setting ....................................................................................................52
10.2.3
Remote Playback .................................................................................................55
10.2.4
Remote Monitoring Features ...............................................................................57
11. Mobile Phone Software Installation ................................................................................................58
12. USB Flash Drive Compatibility List .................................................................................................58
iii
1. Specification
Item
Specification
Main Chip
Hi3520(ARM1176/600MHz)
Operating System
Input
Video
Audio
Alarm
Real-time
video
Output
Embedded Linux
Number of Video Input
16CH/BNC
Main Screen
1 CH /BNC
Input
16CH/RCA
Output
1CH/RCA
Voice Intercom
1CH/RCA
Voice compression
Sensor Input
16 X Input
Alarm Output
4X Output
Digital Zoom
Yes
Auto Switch
Yes
Image compression
H.264
D1: 720x480(NTSC) / 720x576(PAL)
CIF: 360x240(NTSC) / 360x288(PAL)
1~6
Resolution
Compression Quality
Recording
Recording Mode
Motion Detection
Pre-Record
Playback
After Recording
5~120 second
Digital Zoom
Yes
D1: 720x480(NTSC) / 720x576(PAL)
CIF: 360x240(NTSC) / 360x288(PAL)
Time search, Event search, Channel search, Log search
Resolution
Recording Query
Backup
Network
File Format
Media Interface
Resolution
QCIF/CIF
Playback
Yes
Communication Protocol
Interface
Maximum support capacity
HDD
The number of internal
HDD
Storage
External Storage
File System
S.M.A.R.T
Menu Display
User Interface
Input Method
Serial
P/T/Z Control
Interface
Network
Ethernet
Internet
Web Monitoring
access
Internal Buzzer
Multi-Language
Other
Features
Firmware Update
3G Mobile Phone
Operating Environment
Power Supply
General
Specifications Weight
Dimension (W x D x H)
2. Structure of Product
Front Panel
1~16 ch
HDD Tray
Power
PTZ
Auto Switch
0(+10)-9
Channel 1~16
MENU
Menu
ENTER
Enter
Up
Down
Left / Right
POWER
PTZ
AUTO
POWER LED
RUN LED
REC LED
LAN LED
ALARM LED
Power
PTZ
Auto Switch
Power Indicator LED
Run Indicator LED
Recording Indicator
LED
Network Indicator
LED
Alarm Indicator LED
Manual Recording
/Stop
Step Forward /
Pause
Play
USB Port
USBx2
Function Key
LED Indicator
USB
Menu Key
Under the live viewing mode or playback mode, press channel 1~16
button to display the individual channel screen.
Under the live viewing mode, press MENU to enter the main menu.
Under the menu mode, press MENU to go to the upper menu.
Press the Enter button to confirm the setup
Under the menu mode, To move up.
Single or 4/9 split in Live mode, can control the image display page.
Under the menu mode , To move down.
Single or 4/9 split in Live mode, can control the image display page.
Under the menu mode, to move left or right of the selection setting
Under the LIVE mode, change to single/Quad/9/16 division display.
Continued after 5 seconds, the system shutdown.
To enter the PTZ control page.
Under the live viewing mode, press the button to start/stop the auto
switch function.
The LED will light on when power on.
The LED will light on when the system is turned on for working.
The LED will light on when recording.
The LED will light on when network connected (When the network is
connection with data transfer).
The LED will light on when ALARM is trigger.
Press the manual recording button to start recording under the live
mode.
To stop the operation or go to the upper menu under the playback
mode.
To playback frame by frame in each time under the pause mode
during the playback.
To pause the playback under the playback mode.
Under the live viewing mode, pres the Play button to enter the
playback mode.
For Mouse or backup (bottom USB slot parallel with the rear panel
USB jack, the alternative use).
Installation
Audio In
Audio Out
Video Out
Line In
Video In
Alarm
RS-485
XGA
9.
HD Output
10
E-SATA
11
LAN
12
USB
USB interface jack (parallel with the front panel USB jacks, alternative use)
13
Ground
14
Power Jack
Alarm I/O
16CH Alarm Input and 4CH Alarm Output (Relay Out), please refer to below
position.
3. HDD Installation
Please install the 3.5 inch SATA HDD in the device and connect the power
wire and transmission wire. If no install HDD, the system cant recording.
When install 1pc HDD, the hard disk can be installed in any SATA HDD
position.
All in the list below has been tested and be recommended for functional
ensuring.
Brand
SEAGATE
HITACHI
Model Number
Capacity
ST3250310CS
250G
ST3320410SV
320G
ST3500418AS
500G
ST3500312CS
500G
ST3750528AS
750G
ST31000424CS
1T
ST31500541AS
1.5T
ST32000542AS
2T
HCT721025SLA380
250G
HCT721032SLA380
320G
HCP725050GLA380
500G
HCT721010SLA360
1T
HDHCT721010LAS360
1T
WD3200AVVS
320G
WD3200AAKS
WD5000AVVS
WD5000AAKX
WD
320G
500G
500G
WD10EURS
1T
WD10EVDS
1T
WD10EVVS
1T
WD15EARS
1.5T
WD20EARS
2T
WD2001FASS
2T
3.5 inch hard disk tray, the HDD can interchangeable, maintenance save
time and convenience.
Tool-free for the hard disk installation, no need screws.
Just confirm the direction of hard disk installed. Directly install the hard disk
on tray to complete the hard disk installation.
Two stage safety lock
4. System installation
Connect the camera video output to the DVR video input port with BNC
connectors.
BNC connectors recommend to use RG-59 or above.
Alarm Installation
Please refer to Installation for external alarm I/O installation. Please refer to
Alarm Setup
Power Installation
lease use the provided power cable and adaptor to connect the
DVR(AC100V~AC240V), Please refer to Installation for connecting position
REAR PANEL. The DVR system will enter into live viewing mode when
power is connected. Please refer to Live Display mode for more
information.
Setup2: Setup the Network (as below) / finish setup and then clickNextfor next
step setting.
Setup3: Setup recording quality / resolution / frame (as below), finish setup and
then clickNextfor next step setting.
Setup4: HDD management & format(as below) , finish setup and then click
Nextfor next step setting.
6. System Operation
There are 3 kinds of DVR control method: Front panel, remote control and USB
mouse, The front panel operation, please refer to the [Front panel].
USB Mouse Operation
1. Quick Menu: Right click the mouse button under the live viewing mode
to go for enter into Quick Menu.
2. Left click the mouse button under the main menu to go to the select
menu.
3. Left click the mouse button under the select menu to go to the
sub-menu.
4. Right click the mouse button under menu selection to EXIT.
5. Use the mouse or Virtual Keyboard to change the setting.
Record
Play
Step/Pause
Fast Rewind
Slow Forward
Fast Forward
Focus
PTZ Iris
Zoom in/out
Remote ID Setup
PTZ Setup
Mute
Search
Auto Switch
Information
Enter
Up Selection
Left Selection
Right Selection
Menu
Cancel
Down Selection
9 Division Display
Quad Display
16 Division Display
Number1~9
Channel1-16(switchable)
NoteThere are many DVR equipments in the same place, the remote control
first need to select a device, according to the DVR ID. So, should give each
DVR device to define a unique device number (DVR ID). Otherwise, the remote
control operation may be playing a role for multiple devices with the same DVR
ID number at the same time.
Mouse Operation
[Up/Down/Left/Right]
[Move Cursor]
[Enter]
[Left Click]
[Right Click]
Quick Menu
Setup Operation
USB Mouse
Select Item
[Up/Down/Left/Right]
[Moving Cursor]
[Enter]
[Left Click]
10
7. Display mode
There are 4 kinds of screen display mode: Live, Auto Switch , PTZ , Digital zoom,
quick playback.
7.1 Live Viewing Mod
The DVR will go to the live display mode after boot up.
Record
Motion Triggered
Alarm Triggered
Schedule Record
Manual Record
Below table is an simply introduce for mouse, front panel and USB
mouse:
Setup Operation
Channel1~16 Single
Channel Display
4/9/13/16 channel Split
Display
Quick Menu
[4/9/13/16 Split]
[MENU]
USB Mouse
Left click upon selected
channel
Move cursor to UI Menu to
select[Left Click]
[Right Click]
Move cursor to UI Quick Menu
Playback Mode
[Play or search]
11
record
menu to select
To UI Quick Menu
select
To UI Quick Menu
select
To UI Quick Menu
Select
To UI Quick Menu
Select
To UI Quick Menu
Select
Note: The set up for the Auto switch interval time, to the main
menu->Configuration Management->Basic/System Page, set up auto switch
time.
7.3 PTZ
Before selectPTZ, Please understand the specification and setting for
speed dome. Please refer to PTZ setup for correct setting.
PTZ setup ok and then in Quick menu to click
enter below PTZ
control page.
12
The following table is simple operation for Mouse and panel , remote
control:
Setup Operation
USB Mouse
Control
Select Item
[Up/Down/Right/Left]
Moving Cursor
[Enter]
[Left Click]
[Up/Down/Right/Left]Move to
Select PTZ Channel
Zoom+-
Zoon
Focus+-
Focus
Iris+-
Iris
[Up/Down/Right/Left] move
[Up/Down/Right/Left] Moving
Lens position control
confirm
Back to live display
[MENU]
Right Click
13
by mouse or
3. Moving mouse cursor to the zoom position, click left mouse button to
drag zoom area. Release mouse button to zoom in (as below). The
lower right of the screen for the original image, the box is for zoom
display area.
14
4. Moving mouse cursor to the bottom right corner of the selection area,
press and hold the left mouse button drag to display the zoom
position.
5. When pop-up the digital zoom display, can click right mouse button
to exit, re-pull the selected area.
Note: When you drag the selected area the smaller the range, the
greater the digital zoom times multiple. But, when the drag selection
area is too small, the system will show not allow to warn.
7.5 Quick Playback
15
Menu Operation
USB Mouse
Fast Rewind
[Fast Rewind]
[Left Click]
Fast Forward
[Fast Forward]
[Left Click]]
Step /Pause
[Step/Pause]
[Left Click]]
Step Forward
[Step Forward]
[Left Click]]
Play 1x
[Play]
[Left Click]]
Stop
[Stop]
[Left Click]]
Mute
ON/OFF
[Left Click]
Digital zoom
Click
[Left Click]
Click
[Left Click]
click
or
Click
or click right
[Left Click]
Click
[Left Click]
Image Forward(Total
playback time) jump 10%
Click
Click
Click
Click
Image Rewind(Total
playback time)jump 10%
16
8. Menu Operation
8.1 User Login
After system turn on, the system will auto appear the following dialog
box that you need to key in correct user name and password before into
the main menu.
The default user name: admin / Password: blank. The user name can be
set different permission(in later chapterUser Managementwill
introduce)
Main menu
The main menu contains configuration management / recording data
search (video playback) / data backup(image data backup) / Information
/ Hard Disk management / Firmware upgrade / the user log off / system
shutdown / restart the system configuration options.
17
8.2.1
Configuration Management
Path: Main Menu->Set up Management
The setup management page is divided into the Basic setup / Live /
Recording / Schedule recording / Alarm / Network / User
Management / PTZ / Advanced setup.
As follows to introduce.
18
( 1 ) Basic Setup
Path: Main Menu->Config management->Basic setup
The setup page is divided into the System and Date & Time
setup pages.
(1.1) System
19
Note: If the setup is different the actual display, and then unable
enter the menu to change the output screen. The system boot
and plug to continuous press mouse wheel until show the screen,
you can successfully change the screen output.
g. The system language selection: need to restart DVR after set
up.
h. Auto switch time setting.
i.
a. Date format: Select the date display format, there are three
kinds format, 1. Year-Month-Date. 2. Date-Month-Year.
3.Month-Date-Year.
b. Time Standard: Select 24-hour time format or 12-hour time
format.
c. Time Zone Selection
d. The manual collate time selection.
e. Network time server selection and if prompt synchronize collate
time.
f. The system date setup: set the correct date
g. After setup, press Apply
20
21
The mask setting steps are as follows, need to use the mouse set
up:
a. Select channel for privacy mask , clickSetup, enter the
live monitor screen.
b. In the mask area, move the mouse cursor and press left
button to select area, and then release the mouse button to
finish the cover area setup. (see below)
c. In the mask area, use the mouse to double-click to cancel
the mask area setup.
d. Finish the mask setup for Each Channel the, pressApply
Mask area
( 3 ) Recording
Path: Main menu->Configuration Management->Recording
22
Note: VBR mean that according to the audio and video complexity to determine the
23
sampling rate. When the video is complex, the captured bit and retrieved bit are more,
that will make the video data files increase. On the contrary, if the video is simply, that
will collect less bit to storage. In other words, the whole audio and video sampling rate
arent same. If you choose the CBR, from start to finish are all maintain a certain bit rate.
For 5 minutes of image data, if take 512kbps sampling rate to calculate. That is
equivalent to 19200k5x60x512/8.The advantage is compression speed quickly; VBR
the flow per second can changeable, the advantage is to record with more capacity in
the complex signal, when the wave simple, it can with low flow rate to effective use of
space. The disadvantage for CBR is that the flow are all same per second, it is easily to
waste of space.
(3.3)Recording time
Set up each channel the Pre-alarm record time and Post-alarm
record time.
(3.4)OSD Display
Set up each Channel Name and Time Stamp if need to display
for recording, and the directly adjust position for mouse to drag
and drop. (Note: The definition for this function setup is
different from the location of live monitor for Date & Time and
Channel name.)
24
(3.5)Loop Record
Set up Loop record when the HDD is recording full to cover and
Loop record.
( 4 ) Schedule Recording
Path: Main menu->Configuration Management->Schedule
Recording
This DVR, except manual recording dont need to schedule the
recording time. The Schedule Recording (Timer Recording /
Motion Recording / Alarm Recording are all need to set up
schedule the recording period for each channel .
(4.1)Schedule recording
25
(4.3)Sensor recording
The setup way is same as Schedule Recording (Timer
Recording) (The factory default is open all time )
26
( 5 ) Alarm
Path: Select Main menu->Configuration management->Alarm
All Alarm setup for this DVR are all concentrated on this page,
the sub-individual set up for each channel or sensor are
divided into Sensor alarm(Alarm input) / Motion detect / Video
Loss / Alarm out.
27
28
(5.1.2.3) To PTZ
To select the relative actions after triggering PTZ
cameras, like present point, tour, and tracking.
29
30
31
( 6 ) Network
Main Menu-> Setting Management->Network
(6.1) Network (Setting))
Main Setting:
a. HTTP Port Setting, Default: 80
b. Server Port Setting, Default: 8670
c. Mobile Port Setting, Default: 101
d. Automatically obtain IP
32
Static IP Setting
a. IP Address
b. Subnet Mask
c. Gateway
d. DNS Server 1
e. DNS Server 2
PPPOE (As the following figure)
Move Bar
a. PPPOE Setting
b. User Name
c. Press Dial after setting up passwords, the connection
status will be displayed on the bottom left corner (As the
following figure)
d. UPNP Setting
(6.2) Network Stream
Setting the value of network video stream (Sub Stream),
Please refer to Main Menu->Setting Management->Video
Setting-> Video Resolution Setting
33
(6.3) E-mail
Setting of Triggering Alarm Message Sending
34
35
( 8 ) PTZ
Main Menu-> Setting Management-> PTZ Setup
(8.1) RS-485(Setup)
36
( 9 ) Advance
Main Menu-> Setup Management-> Advance
37
8.2.2
Data Search
Main Menu-> Data Search
Beside pressing quick menu button
to playback daily 1~4
channel video files, you can also go to Main Menu->Data Search, or
press
in remote control for playback.
Data search can be selected By Time or By Type
( 1 ) By Time (Data Search Playback)
1. Start Time
& End Time
2. Select Channel
3. Playback Start
38
4. Start Time
1. End Time
2. Select Channel
3. Recording Type
8.2.3
Backup
Main Menu-> Data Search
Backup Steps as below:
a. Plug-in USB flash drive, hard drive.
b. Backup Display
1. Start Time
End Time
4. Select Channel
2. Select Backup
Channel
39
Backup Type
Backup file
format
Backup Start
8.2.4
Information Search
Main Menu-> Data Search
Available for searching system Information, log list, and network
information
40
( 1 ) System
Main Menu-> Information Search->System (or Press Info in
the remote control)
Display system hard drive and software information
( 2 ) System Information
Main Menu->Information Search->System Information (Press
INFO on the remote control)
Log Search is for operation, setup, playback, backup, data
search, information search, error search, maximum amount of
log list is 5,000
41
1. Select Time
2. Select Type
3. Press Search
4. Press Export
Steps:
a. Select Time
b. Type: Operation, Setup, Playback, Backup, Search,
Information, Error; multiple selection is available.
c. Press Search for the all type of lists
d. Press Export to save the designated log list into USB flash
drive (as the following figure)
42
8.2.5
Hard Disk
Main Menu-> HDD Management
Displaying of HDD Status, users can format HDD in this function
Format Steps as following:
1. Select HDD
Firmware Update
Main Menu-> Firmware Update
Firmware Update is beside updating mainboard firmware update,
also including modifying the Boot logo and Show logo
43
1. Select Type
2. Select Data
User Log-out
8.2.8
Turn Off
8.2.9
Restart
44
9. DVR Player
Back-up files playback, if backing up files with .ifv format, please use this
player for playback.
DVR Player available are from:
A. Software CD,
B. During backup procedure, it will automatically be saved along with
back-up files
C. Download form DVR through IE connection
D. Download form FUHO official website
DVR player must be uncompressed then install on pc, steps as the following
figures:
Step 1: Click NEXT
45
f.
g.
h.
i.
: Open file.
: play / pause file.
: stop file.
: slow play at 1/2, 1/4 and 1/8 speed.
: Quick play at X2, X4 and X8 speed.
: backward play to 10% of file time.
: forward play to 10% of file time.
: play frame by frame.
: Directly snap shot images, as saving
path will be required.
Picture 1
Picture 2
46
Picture 3
Picture 4
47
2. Click Security-> drag down the level as low in trusted site icon-> Click
Apply-> Click Sites
48
Method 2
1. Click Tools -> Internet Options-> Security-> Custom Level:
2. Change download un-regestered ActiveX option to
enable
49
10.2 IE Connection
Open IE and by entering IP address of the DVR to connect to the login
screen as shown below. Select language you wish to view in and enter the
correct user name and password after successfully downloading the control
interface.
50
10.2.1
Operation:
(1) User login
(2) Video monitoring window
(3) PTZ:
Direction control button: up, down, left and right.
(a)
(b) Aperture: adjustable aperture of PTZ lens.
(c) Focal Length: adjustable focal length of PTZ lens
(d) Zoom: Zoom IN/OUT
(4) Video monitoring window split mode: 1, 4, 9, &16 split channel
(5) Stream options: main stream and sub-stream. Recommend
sub-stream for slow network speed environment.
(6) Channel Connection: choices of single channel or all channels to be
open/closed state.
and
are open and close
respectively. In video monitoring window, press the left mouse button to
select the target channel (example, the target channel in red square
shown)
(7) Two-way audio: switch ON/OFF audio.
(8) Configure: set the DVR parameters and functions.
(9) Playback: time, motion, alarm, manual recording data during
playback or download.
(10) Download the playback software
51
(b).The channel
setting: set or modify
the name of the
channel (for Chinese
characters, must
enter it remotely),
channel title display,
time display,
recording frame per
second (main
stream), video
quality, video frame
rate selection, frame
per second and
quality of other
stream (sub-stream),
PTZ and so on.
52
53
54
10.2.3 Remote Playback
Playback (#9), time, motion, alarm, manual recording data playback or
download.
a. Channel selection
b. Set the start, end date and time, then press "Search" (or click on the
playback time)
c. Double-clicking on the selected file for playback (16 video files playback
allowed). Operation is as below:
1. In the quad
split on the
right, the
channels in red
square is
indicated as
the playback of
the selected
video file.
2.
Double-Clickin
g the selected
file from the
event log on
left, then it will
begin to
playback.
55
3.
Click on
monitoring
window (red
square will
appear) and
select a video
file from the
event log list
on left you wish
to playback.
4. Playback screen (4,8,9,16 split) click on the desired channel for the single-screen
playback, or click the "full screen" playback
d. Select the file and press downloadto download the data file to PC
e. Playback operation is as the same as Player (please refer to the operational
instruction of Player).
56
a. Audio On: All 16 channels can record sound and image or remote
transmission simultaneously. Click on selected channel to open audio
for instant remote monitoring; before open audio on another channel,
the previous audio channel should be closed
b. Snapshot: real-time remote snapshot and save file as .bmp or .jpg files.
c. Record: remote recording on selected channel.
d. PTZ setting: preset points, cruise, and tracking.
e. OSD setting: set title of channel and time display location.
f. Motion detection setting: set motion detection area which can be set by
dragging the mouse.
g. Image setting: set brightness, contrast, hue, and saturation.
h. Mosaic: Set the area to be blocked.
i. Full screen: Click the full screen to watch the video in full screen.
57
Model Number
Capacity
Jetflash V20
4G
Jetflash 500
8G
Jetflash V30
16G
Jetflash V20
32G
PD1
4G
PD1
8G
C801
16G
C801
32G
Microvault
8G
Microvault
16G
Cruzer Micro
4G
SDCZ36-004G
4G
DTIG2
4G
DTIG2
8G
DTIG2
16G
Transcend
Adata
SONY
SanDisk
Kingston
58
59