Professional Documents
Culture Documents
Daikin also has various other control devices to suit the specific sizes and conditions of A/C systems.
E v o l u t i o n
* RoHS Directive
The RoHS (Restriction of Hazardous Substances (in electrical and electronic equipment)) Directive is an environmental directive enacted
to regulate the use of designated chemical substances (lead, cadmium, hexavalent chromium, mercury, polybrominated biphenyls and
polybrominated diphenylether) in electrical equipment. All household products subject to this Directive and sold in Europe from July 1,
2006 are legally bound to comply with the RoHS Directive.
Using interface
DAIKIN is the first manufacturer (Vendor ID53: Nov 15, 1999) whose VRV System has been officially approved as BACnet® compatible equipment.
Catalog information is as of November 2006.
BACnet ® is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).
LONWORKS®, LON® and LonTalk® are registered tradmarks of Echelon corporation.
Ethernet is a registered trademark of Xerox corporation.
Dealer
Head Office:
Umeda Center Bldg., 2-4-12, Nakazaki-Nishi,
Kita-ku, Osaka, 530-8323 Japan
Global Cooling Air Conditioning UK Ltd.
Tokyo Office: Global Cooling Ltd., Upbrooks, Clitheroe, Lancashire, BB7 1PL
JR Shinagawa East Bldg., 2-18-1, Konan,
Minato-ku, Tokyo, 108-0075 Japan
Please call now for more information
http://www.daikin.com/global/ Tel: 01200 428888 - Fax: 01200 444252
c All rights reserved
Printed in Japan 11/06/003 AD.HP.SW
http://global-cooling.co.uk/airconditioning/air-conditioning-brands/daikin-air-conditioning/vrv-air-conditioning/
Specifications, designs and other content appearing in this brochure are current as of November 2006 but subject to change without notice. Printed on 100% recycled paper with soy ink.
Outdoor
Dedicated interfaces make Daikin air conditioners Unit
BACnet® / Ethernet
freely compatible with open networks BMS DMS502B51
Local Controller
( Interface for use in BACnet® )
PC
Indoor
Unit
HRV
Power supply
Fire alarm Security
facility
® ®
BACnet ® LONWORKS ®
Daikin air conditioning and control systems
help you set up an open network.
Elevator
Pump
D-BACS Security Lighting ...etc
Interface Unit R
LonTalk
Outdoor
Unit
Ethemet(TC/IP)
DMS504B51 Local Controller
( Interface for use in LONWORKS® )
R
Air conditioning control systems can be realized with Providing flexible control and monitoring capability LonTalk Indoor
Unit
little equipment and lower costs. that features linked operation with other systems. HRV
Other systems such as those for fire and crime prevention Building
Dedicated interfaces enhance VRV control. Control
can be easily interlocked with Daikin's unit.
network
1 2
Product description
Seamless connection ®
DMS502B51 Specification
Daikin's interface unit for BACnet® communicates with BACnet® clients via BACnet® over ethernet.
This unit provides information for VRV through BACnet® services.
between and BACnet Comformance Class - 3 Data Link Layer Option - ISO 8802-3,10 Base T
Specifications of Communication
open network protocol. Objects
Analog Input Analog Value Binary Input Binary Output
Functionality
Monitoring Commanding Alarming
Binary Value Multistate Input Multistate Output
Functions of
operating system version 3.0 Monitoring and controlling of A/C
®
( Providing interface from BACnet to VRV. ) ® The items to monitor and control air conditioners from BACnet communication as well as descriptions of each item are listed below.
Function Description
COV-Change of value ON/OFF Status Monitors ON/OFF status of the respective air conditioners.
With the new O.S. the change of an object can be automatically read by the
Alarm Sign Monitors whether air conditioners are operating normally and, if not, sends out an alarm sign.
BMS without having to constantly scan regularly for any change.
Error Code Displays error code specified by the respective manufacturer if an abnormality occurs in the system.
Property array index ( Reading of objects ) Operation Mode Monitors status of cooling , heating and ventilation operation.
Monitoring
This is used for objects such as Schedule Object that uses the Property Array inclu- Room Temperature Monitors room temperature and displays the actual room temperature.
ded in the device object. The reason why this is sometimes required is so that reg- Filter Limit Checks the limit of filters in use and monitors if there is a necessity to replace the filters.
istration of objects can be done automatically and manual input is not necessary.
Thermostat Status Monitors whether the thermostat in the air conditioner is operating properly.
The "Object_List" of the device can be read automatically with this index therefore
Compressor Status Monitors whether compressors in outdoor units that are connected to the indoor units are operating properly.
reducing engineering time of programming the indoor units into the BMS.
Indoor Fan Status Monitors whether fans in the air conditioners are operating properly.
Segmented requests Heater Operation Status Monitors whether heaters in the air conditioners are operating properly.
Is the function, which transmits separately two or more packets, when number PPD data Electric total power (number of indoor unit) as an object of accumulator.
of data exceeds one packet size.
ON/OFF Operation Starts and stops the respective air conditioners and monitors control results.
In the case where there are a large number of indoor units the response is in
Operation Mode Setting Sets the operation mode (cooling, heating, ventilation or auto mode) and monitors the setting results.
the "read property request" and the return data is segmented.
Support BACnet/IP in accordance with ISO16484-5(Building automation and Airflow Rate Setting Operation Sets the airflow rate and monitors the setting results.
control systems. Data communication protocol) for BACnet. Sets the air direction and monitors the setting results.
Air Direction Setting Operation
Note:Does not support IEEE802.3 protocol for BACnet.
System Forced OFF Setting Rejection Upon receiving a Forced OFF Command, checks whether it is a normal reset or forced OFF and then operates as necessary.
RoHS compliant NEW Forced Thermostat OFF Setting Upon receiving a Thermostat OFF command, checks whether it is a rest or set and then monitors setting results.
We have been making efforts to facilitate the transition to using RoHS Energy Efficiency Setting
Directive-compliant.
*Refer to the back cover for details about the RoHS Directive.
Series and components
Hardware model name DMS502B51 DMS502B51+DAM411B51 (Optional D expansion kit)
Specifications
Outdoor Optional D expansion kit
Unit
Item Description
BACnet® / Ethernet
®
Dimensions(W x H x D) 275 x 263 x 81.5(mm)
BACnet is a registered trademark of American Society of Heating, Refrigerating and
Air-Conditioning Engineers (ASHRAE). Weight 3.0kg
3 4
Product description
integration of ®
Topology : Free topology
Transmission medium : Twist pair
nvoOnOff_nn
nviOnOff_nn
SNVT_switch
SNVT_switch
each object ).
Open network integration nviHeatCool_nn
nvoHeatCool_nn
SNVT_hvac_mode
®
Network parameter chart SNVT_hvac_mode
nvoSetpoint_nn
An all gateway for connection to LONWORKS network equipment DIII-NET Common Objects SNVT_temp_p
nviSetpoint_nn
and building control system. SNVT_temp_p nvoSpaceTemp_nn
® SNVT_temp_p
LONWORKS networks are recognised worldwide as the de facto GENERAL(object id = 65)
nviFanSpeed_nn nvoFanSpeed_nn
standard in the building control industry. SNVT_switch SNVT_switch
nviSystemOff nvoSystemOff
Systems are available for access control, energy management, SNVT_switch SNVT_switch nvoFiltersign_nn
nviFSReset_nn
SNVT_switch
fire/life, HVAC, lighting, and more. nviRejLC nvoRejLC SNVT_switch
SNVT_switch SNVT_switch nvoFailure_nn
nviRejOnOff_nn SNVT_switch
Configuration Properties SNVT_switch
Reduction in engineering and nc49 Send Heartbeat
nc52 Minimum Send Time
nviRejMode_nn
nvoErrStatus_nn
SNVT_count
nc64 Send on Delta Temperature
cost of wiring nc111 Delay Start Up
nc20 Range Maximum
SNVT_switch nvoThermo_nn
SNVT_switch
nviRejSetpoint_nn
nvoRejOnOff_nn
The open protocol specification gives local system integrators SNVT_switch
SNVT_switch
complete design freedom. nvoRejMode_nn
Air Conditioner Objects nviThermoOff_nn
Plus, the ability to combine individual items of equipment into a SNVT_switch SNVT_switch
®
It features objects for a group of 64 indoor units. As shown below, the object name and the
L ON W ORKS network reduces the engineering time and costs last "nn" in the "nv Name" correspond with the DIII-NET location setting address.
nvoRejSetpoint_nn
SNVT_switch
required for wiring. Indoor Unit Location Setting Address A/C Object nv Name (Example) nvoHvacExist_nn
1-00 - 1-15 AC_01 - AC_16 nviOnOff_01 - nviOnOff_16 SNVT_switch
2-00 - 2-15 AC_17 - AC_32 nviOnOff_17 - nviOnOff_32 nvoThermoOff_nn
Connectable to up to 64 groups 3-00 - 3-15
4-00 - 4-15
AC_33 - AC_48
AC_49 - AC_64
nviOnOff_33 - nviOnOff_48
NviOnOff_49 - nviOnOff_64
SNVT_switch
Specifications
Typical LONWORKS® application
Item Description
BMS Model name DMS504B51(Interface for use in LONWORKS® )
LonTalk® LONWORKS®
Transmission
FT-X1 (Free topology 78kbps)
Outdoor
Unit
Ethemet(TC/IP)
5 6