Professional Documents
Culture Documents
Users Guide
Analisis General
Un analisis tipico de ROCFALL puede realizarse en
unos minutos, y consistir de los siguientes pasos:
1. Definir el talud.
2. Definir los materiales del talud.
3. Asignar los materiales a los segmentos del talud.
4. Definir los puntos de partida de las rocas (Sembradores/Seeders).
5. Computar el analisis
6. Graficar los resultados.
Ademas se pueden definir Barreras y recolectores de
datos, como se discute en el Tutorial 2. Este tutorial
explica los pasos basicos 1-6 para realizar un analis de
RocFall simple.
Definir el Talud
Antes de empezar, observe que cuando comienza el
programa ROCFALL , se muestra un documento en
blanco. Esto le permite crear un modelo inmediatamente.
La vista inician en la pantalla se conoce como la Vista del
Talud.
El usuario puede crear un documento nuevo en
cualquier momento, seleccionando la opcion Newdel
menu File menu o de la barra de herramientas.
Limites
Antes de definir el talud, se deben configurar los limites
del trazado, de forma que podamos ver el talud a medida
que lo previsualicemos a medida que ingresamos los
datos de la geometria.
Definir Talud
Para crear el talud, selecciones Define Slope desde el
menu Slope ode la barra de herramientas.
vertex
vertex
vertex
vertex
vertex
vertex
vertex
[enter=done]:
[enter=done]:
[enter=done]:
[enter=done]:
[enter=done]:
[enter=done]:
[enter=done]:
0 0
3.1 12.2
6.7 12.2
9.8 24.4
13.4 -25
21.3 23.5
press Enter
Defining Materials
Para definir los materiales del talud, seleccione
Material Editor desde la barra de herramientas o del
menu Slope.
Rn
(mean |
sd)
Rt
(mean |
sd)
Phi
(mean |
sd)
Roughness (sd)
Type One
0.8 | 0.03
0.8 | 0.03
30 | 0
Black
Type Two
0.7 | 0.03
0.8 | 0.03
30 | 0
Green
Type Three
0.5 | 0.03
0.5 | 0.03
30 | 0
Pink
Name
Color
4.
Asignando Materiales
Las propiedades de los materiales se asignan a los
segmentos del talud con el dialogo Slope Editor,
disponible en el menu Slope. Tambien se puede abrir el
dialogo Slope Editor haciendo doble clicl en el vertice del
talud.. (Los materiales tambien se pueden asignar
graficamente con el mouse. Esto se describe en la
proxima seccion)
10
11
Tips de Datos
Tips de Datos, que aparecen cuando posiciona el cursor
por unos segundos sobre las entidades del modelo son
una caracteristica util de RocFall feature of ROCFALL.
Por ejemplo, si posiciona el cursor sobre un segmento del
talud, las propiedades de los materiales se mostraran
como se observa en la siguiente figura.
12
13
14
15
Computar
Para ejecutar el analis de ROCFALL, seleccione la opcion
Compute desde el menu Rocks o de la barra de
herramientas.
16
17
Chart Properties
Right-click on the graph and select Chart Properties.
Statistics
Right-click on the graph and select Statistics. A dialog
displaying graph statistics will be displayed, as shown in
Figure 1-12.
Scroll down to view the information in the Statistics
dialog.
18
19
Envelope Graphs
Kinetic Energy (Total, Translational, and Rotational),
Velocity and Bounce Height envelopes can also be
generated for ROCFALL analyses.
20
Note:
Distribution Graphs
Kinetic Energy (Total, Translational, and Rotational),
Velocity and Bounce Height distribution graphs can be
generated.
The distribution graphs show the distribution of results at
X locations (horizontal locations) along the slope.
21
22
23
24
25
Project Settings
For this Quick Start tutorial, we have so far used the
default simulation parameters. Lets now change some of
the simulation parameters in the Project Settings dialog,
and re-run the analysis.
26
Pseudo-Random Simulation
By default, ROCFALL uses true Random number
generation to sample the input data distributions you
have defined for material properties etc. This means that
each time Compute is selected, the analysis results will be
different, and different rock paths will be generated. This
is because a different seed number is used each time the
random number generator is called.
However, there may be times when you wish to generate
reproducible results for a ROCFALL analysis. The
Pseudo-Random option in the Project Settings dialog
allows this.
Pseudo-Random simulation means that the SAME "seed"
number is always used to generate random numbers for
the sampling of the input data distributions. This results
in identical sampling of the input data distributions, each
time the analysis is run (with the same input
parameters). This can be useful for demonstration
purposes, the discussion of example problems, etc.
To demonstrate Pseudo-Random sampling:
27
Exporting Images
In ROCFALL, various options are available for exporting
image files.
JPEG (*.jpg)
Copy to Clipboard
The current view can also be copied to the Windows
clipboard using the Copy option in the toolbar or the Edit
menu. This will place a bitmap image on the clipboard,
which can be pasted directly into word or image
processing applications.
28
Info Viewer
The Info Viewer option in the File menu and the toolbar,
displays a summary of all ROCFALL model parameters in
its own view. This includes:
Slope geometry
Slope materials
Seeder properties
Simulation parameters
29
30