Professional Documents
Culture Documents
1.1
If v(t) = 160 cos 50t V and i(t) = - 20 sin (50t - 30) A, calculate the average power.
1.2
Refer to the circuit depicted below. Find the average power absorbed by each element.
1.3
Assuming that vs = 8 cos(2t - 40) V in the circuit shown below, find the average power delivered to each
of the passive elements.
1.4
A relay coil is connected to a 210-V, 50-Hz supply. If it has a resistance of 30 and an inductance of 0.5
H, calculate the apparent power and the power factor.
1.5
Obtain the power factor for each of the circuits below. Specify each power factor as leading or lagging.
1.6
A source delivers 50 kVA to a load with a power factor of 65 percent lagging. Find the loads average
and reactive powers.
1.7
The voltage across a load and the current through it are given by
v(t) = 20 + 60 cos 100t V
1.9
1.10
An 880-VA, 220-V, 50-Hz load has a power factor of 0.8 lagging. What value of parallel capacitance
will correct the load power factor to unity?
1.11
An 40-kW induction motor, with a lagging power factor of 0.76, is supplied by a 120-V rms 60-Hz
sinusoidal voltage source. Find the capacitance needed in parallel with the motor to raise the power
factor to:
(a)
(b)
0.9 lagging
1.0.