Professional Documents
Culture Documents
1 of 10
http://m9.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
Pennobulesugari Naveen
Kumar (Enroll User)
HOME
SCORE CARD
MY TEST
TIME MANAGEMENT
QUESTIONS REPORT
DIFFICULTY LEVEL
Log
Out
SOLUTION
TOPIC REPORT
MY PROFILE
REPORTS
BUY PACKAGE
View Your Test Analysis
NEWS
Q.
No
Q.1
Question Status
The difference in pressure (in N/m 2) across a soap bubble of diameter 0.001 m
immersed in water (Surface tension = 0.072 N/m) is
a. 288
b.
576
c. 1152
d. 144
Not Attempt
Q.2
Correct Ans.
Solution
c. 1.33
d. 1.5
Not Attempt
Q.3
Correct Ans.
Solution
2/4/2015 1:59 PM
2 of 10
http://m9.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
a. 0.4175
b. 1.67
c. 3.34
d.
0.835
Not Attempt
Q.4
Correct Ans.
Solution
unsteady uniform
d. steady non-uniform
Not Attempt
Q.5
Correct Ans.
Solution
flow is steady
Not Attempt
Q.6
Correct Ans.
Solution
For the configuration shown, the minimum head H in the vessel will be
[Take CV = 1]
2/4/2015 1:59 PM
3 of 10
http://m9.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
a. 1 m
b.
0.5 m
c. 2 m
d. 0.25 m
Not Attempt
Q.7
Correct Ans.
Solution
Not Attempt
Q.8
Correct Ans.
Solution
Compressive forces
Not Attempt
Correct Ans.
Solution
Q.9
A 2-D flow field is defined as
xy 1 = 0
b. xy + 1 = 0
c. xy + 2 = 0
d. xy 2 = 0
Not Attempt
Q.10
Correct Ans.
Solution
The percentage change in specific speed of the pelton turbine, when the
number of jets are increased to 100 from 25, keeping other conditions same,
will be
2/4/2015 1:59 PM
4 of 10
http://m9.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
a. 100%
b.
+100%
c. +50%
d. NIL
Not Attempt
Q.11
Correct Ans.
Solution
a.
b.
c.
d.
Not Attempt
Q.12
Correct Ans.
Solution
Not Attempt
Q.13
Correct Ans.
Solution
Not Attempt
Q.14
Correct Ans.
Solution
A ferry boat has internal volume 1 m3 and weight 50 kg. If a leak develop in the
bottom and water starts coming in, the fraction of the boats volume which will
be filled with water before water starts coming in from the sides is
__________.
Not Attempt
Correct Ans.
0.95
2/4/2015 1:59 PM
5 of 10
http://m9.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
Solution
Q.15
A water Jet 0.0015 m2 in area issues from a nozzle with 15 m/s velocity. It is
made to impinge perpendicular on to a plate moving with velocity V. The force
on plate due to this impact is found to be 150 N. Then V is ________ m/s.
Not Attempt
Q.16
Correct Ans.
Solution
The maximum velocity with which a fluid having density of 90 kg/m 3 and
viscosity 0.1 Ns/m2 can flow through a tube of 10 cm diameter without causing
any turbulency is __________ m/s.
Not Attempt
Q.17
Correct Ans.
Solution
b6
b. b 6
c. b 3
d. b 3
Not Attempt
Q.18
Correct Ans.
Solution
A fluid has an absolute viscosity of 0.05 Pa.s and a specific gravity of 0.68.
When such a fluid, flows over a flat plate, the velocity at a point 75 mm from
the surface is 1.125 m/s. Assuming parabolic velocity distribution with the
vertex at the above said point, the shear stress at 50 mm from the boundary
surface will be
a. 1 N/m2
b. 0.1 N/m2
c. 0.05 N/m2
d.
0.5 N/m2
Not Attempt
Q.19
Correct Ans.
Solution
2/4/2015 1:59 PM
6 of 10
http://m9.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
2. No fluid may enter or leave a stream tube excepts through its ends.
1, 2, 3 and 4
Not Attempt
Q.20
Correct Ans.
Solution
v = 4t + 5 x
123.97 units
b. 172 units
c. 103 units
d. 13.11 units
Not Attempt
Correct Ans.
Solution
Q.21
a. a
b. b
2/4/2015 1:59 PM
7 of 10
c.
http://m9.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
d. d
Not Attempt
Q.22
Correct Ans.
Solution
a. 23.58 m/s
b. 37.16 m/s
c.
47.16 m/s
d. 59.12 m/s
Not Attempt
Q.23
Correct Ans.
Solution
67 L/s
c. 667 L/s
d. 267 L/s
Not Attempt
Q.24
Correct Ans.
Solution
Oil having a viscosity of 0.05 kg/ms flows through 200 mm diameter pipe. The
laminar flow velocity distribution u (r ) is given by
Where,
R = Radius of pipe
r = Radial distance
The pressure drop for 2m length of pipe will be
2/4/2015 1:59 PM
8 of 10
http://m9.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
a. 30 N/m2
b.
60 N/m2
c. 120 N/m2
d. 6 N/m2
Not Attempt
Q.25
Correct Ans.
Solution
13092.7 W
Not Attempt
Q.26
Correct Ans.
Solution
0.15 N/mm2
Not Attempt
Q.27
Correct Ans.
Solution
u = x + 2y + 2
v = 2x y 3.5
The distance of stagnation point from the origin of reference axes will be
_________.
a. 1 m
b. 1.5 m
c.
1.802 m
d. 2.802 m
Not Attempt
Correct Ans.
Solution
2/4/2015 1:59 PM
9 of 10
Q.28
http://m9.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
Not Attempt
Q.29
Correct Ans.
1.5
Solution
Not Attempt
Q.30
Correct Ans.
Solution
A tank consists of liquids A, B and C of specific gravity 0.879, 0.998 and 13.55
respectively. Initially the tank is closed and the configuration is as shown. If
an opening is made at the top of the tank, then equilibrium level of mercury in
the manometer will be _________ m.
Not Attempt
Q.31
Correct Ans.
Solution
A pelton wheel is rotating at a speed of 200 rpm and develops 5200 kW when
working under a head of 250 m with an overall efficiency of 82%. The
discharge when the turbine is working under a head of 150 m will be
_________ m3/s.
Not Attempt
Q.32
Correct Ans.
2 (1.9 - 2.1)
Solution
2/4/2015 1:59 PM
10 of 10
Not Attempt
Q.33
http://m9.onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=t...
Correct Ans.
Solution
A long, square wooden block is pivoted along one edge. The block is in
equilibrium when immersed in water to the depth as shown in figure. The
specific gravity of wood, if friction in the pivot is negligible is _________.
Not Attempt
Correct Ans.
Solution
2/4/2015 1:59 PM