Professional Documents
Culture Documents
Name:
EDUCATION:
Education Level
High School
Technical School
College
Other
Method/Level:
School/University
EXPERIENCE:
EmOloyer/ProjeCt D'ekiiiitioh
Date:
Dates
Mle'
Graduate/Degree
EieP6iienCe in months
TRAINING: (The training listed below was satisfactorily completed in accordance with
our Written Practice.
Course'Description
Dates
Trn; . Hours ProVider .
Remarks
EXAMINATION GRADES:
RT
General
Specific
Practical
PT
MT
UT
Composite
, as a Level I / II Examiner in
I certify
, based on this individual complying with the education, experience, training and
examination requirements identified in our Written Practice, which is based on SNT-TC1A and the ASME Code.
Date of Certification:
QA Manager/General Manager .
I Re-certify
in
Re-examination
Date of Re-Certification:
Date of Expiration:
Level Ill
I Re-certify
in
Re-examination
Date of Re-Certification:
Date of Expiration:
Level III
I Re-certify
in
Date of Expiration:
Level III
Applicant:
Auditor:
ASME Stamps:
Audit Date:
Rev.
LeVel it!
(YIN)
Level I/II
(Y/N)
N/A
Level III
(YIN)
N/A
(Y/N)
Rev.
Rev.
Rev.
Are the NDE Procedures in compliance with ASME Section V and the applicable
construction code?
1. Do they cover all the essential variables identified in the Code?
2. Do they identify the minimum documentation requirements?
3. Do they address the use of a light meter and the minimum
lighting requirements?
4. Have they been demonstrated to the satisfaction of the Al?
PART III NDE DEMONSTRATION
Are the services of an NDE subcontractor used?
1. If yes, name the subcontractor
2. If Level III services are subcontracted, is their an appointment letter designating
the subcontractor's Level Ill as the Applicant's Level Ill?
3. Does the applicant have copies of the necessary NDE records (I.e., Personnel
Qualification, Procedures and their demonstration to the Al, and Equipment
calibration) in compliance with the Code?
4.
Which NDE discipline has been demonstrated for the Audit?
1. If Radiography,
a. Was the IQ! used in compliance with the Code?
b. Was the X-ray properly identified/marked?
c. Was the film otherwise acceptable?
d. Was the documentation completed correctly?
(i.e., reader sheet & shooting sketch)
e. Was the film comparator- step wedge calibrated?
f. Was the densitometer calibrated?
2. If Liquid Penetrant,
a. Was the procedure followed?
b. Was the NDE Examiner qualified?
c. Was the correct family of Products used?
(i.e., penetrant, cleaner and developer)
d. Was the documentation completed correctly?
(including Lighting equipment and detailed results)
e. Was the light meter calibrated?
f. Was the acceptance criteria applied correctly?