You are on page 1of 5

Nome: _______________________________________________________ Data: ___/___/______

Avaliao: _______________________________ Formadora: _____________________________


1. Match each picture with the correct name.
Side cutting plier
Claw hammer
Electrical plier
Adjustable wrench
C-clamp
Sledge hammer
Screwdriver
Spanner wrench

2. Identify the following pictures writing the appropriate names.


crankcase
propeller

rocker arm
injector

connecting rod
crankshaft

a) ________________

b) ________________

e) ________________

f) __________________

gearbox

pumps

valves

c) ________________

camshaft

piston

outboard motor

d) ________________

g) __________________

h) ________________

3. Look at the picture and fill in the blanks with the correct names.
Then, translate them to Portuguese.
a) ____________________

thrust bearings

b) ____________________

cylinder head
piston head

c) ____________________

connecting rod
oil pan
compression rings

d) ____________________

piston pin
connecting basket

Translation:
a) _____________________
b) _____________________
c) _____________________
d) _____________________

4. Identify the following motor components. Then, translate them to Portuguese.


cylinder
oil pan

piston rings
crankshaft
connecting rod

intake manifold
block
push rod

camshaft

crankcase

head

exhaust manifold

spark plug

valve
piston

water jacket

ABCDEFGHIJKLMNOPQ-

______________________
______________________
(leave out)
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________

ABCDEFGHIJKLMNOPQ-

Translation:
______________________
______________________
(leave out)
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________
______________________

5. Choose the engine part that is being described.


5.1 A rod that connects the piston to the crankshaft.
a. Armature
b. Connecting Rod
c. Flywheel Key
d. Piston
5.2 A valve that permits the remains of the burned fuel to leave the combustion chamber.
a. Camshaft
b. Exhaust Valve
c. Intake Valve
d. Piston
5.3 A cylindrical part closed at one end that is connected to the crankshaft by the connecting rod.
a. Armature
b. Camshaft
c. Flywheel
d. Piston
5.4 A device that filters the air that is mixed with the fuel in the engine.
a. Air Filter
b. Combustion Chamber
c. Cylinder Head
d. Fuel Tank
5.5 The main shaft of the engine which, in conjunction with the connecting rod, changes the
reciprocating motion of the piston into rotary motion.
a. Camshaft
b. Crankshaft
c. Flywheel Key
d. Piston Ring
5.6 Expanding rings placed in the grooves of the piston to create a seal that prevents the passage of fluid
or gas past the piston.
a. Carburetor
b. Flywheel
c. Piston Rings
d. Spark Plug
5.7 The housing where the crankshaft and many other parts of the engine operate.
a. Carburetor
b. Combustion Chamber
c. Crankcase
d. Cylinder Block
5.8 The shaft containing lobes or cams which rotate to raise and lower the valves.
a. Armature
b. Camshaft
c. Connecting Rod
d.
Crankshaft

5.9 The part of the piston above the rings.


a. Carburetor
b. Combustion Chamber
c. Cylinder Block
d. Piston Head
5.10 A detachable portion of an engine fastened securely to the cylinder block that contains all or part of
the combustion chamber.
a. Carburetor
b. Combustion Chamber
c. Cylinder Head
d. Fuel Tank
5.11 A valve that permits the air-fuel mixture to enter the combustion chamber and seals its exit.
a. Armature
b. Exhaust Valve
c. Intake Valve
d. Spark Plug
5.12 The largest single part of an engine. The main mass of metal where the cylinders are bored or
placed.
a. Combustion Chamber
b. Crankcase
c. Cylinder Block
d. Fuel Tank

You might also like