Professional Documents
Culture Documents
P
N
M
S
ASOLINK
ETWORK
ANAGEMENT
YSTEM
NEC Corporation
Copyright 2010
NWD-102886
Table of Contents
1.
Installation Sequence1
2.
LAN Setting2
3.
3.2.
4.
PNMSj Setup 16
5.
Firewall Setup 22
6.
5.1.
5.2.
-i-
NWD-102886
1.
Installation Sequence
Only Administrator group privilege level users are authorized to configure the following settings:
Step 1:
Ethernet option
LAN setting(s)
Step 2:
SNMP service setting(s)
Step 3:
Pasolink Network Management System (PNMS)
setup
Step 4:
Firewall Setup
Step 5:
Launching PNMS
-1-
NWD-102886
2.
LAN Setting
(1)
(2) Verify that the Internet Protocol (TCP/IP) checkbox is checked in the Local Area Connection
Properties window. Click [Properties].
-2-
NWD-102886
(3) Verify that the Use the following IP address is selected and input IP address, Subnet mask,
and Default gateway assigned to the PNMSj server machine. Click on [Advanced...].
(4) Verify that the values input in (3) above are displayed inside the page of IP Settings tab.
-3-
NWD-102886
3.
3.1.
3.1.1
(2) In the Programs and Features window, click on Turn Windows features on or off.
-4-
NWD-102886
(3) Select Features out of the Tree on the left side and click Remove Features which appears to
the right.
-5-
NWD-102886
(5) Confirm that the Simple Network Management Protocol is not checked then click [OK].
Return to above window and click [Remove].
-6-
NWD-102886
(7) After the Results window click the [Close] to restart the computer.
(8) After the restart, click [Close] to complete the removal of SNMP Services.
-7-
NWD-102886
3.1.2
(2) Select Manage Remove Roles and Features in the Server Manager window.
-8-
NWD-102886
(4) Select local machine from the list and click [Next >].
-9-
NWD-102886
- 10 -
NWD-102886
- 11 -
NWD-102886
(9) When the removal is completed, click [Close] and restart the server machine.
- 12 -
NWD-102886
3.2.
(2) Click Services from the list in the Administrative Tools window.
- 13 -
NWD-102886
(3) Confirm that the SNMP Service and SNMP Trap Service are installed and started automatically.
Select Action Properties on the menu bar in the Services window, or right-click SNMP
Service / SNMP Trap Service and then click Properties in the SNMP Service / SNMP Trap
Service pop-up menu.
(4) Select the Manual from the Startup type field and click on Stop button in the Service status area
of the General tab. Click [OK] or [Apply].
- 14 -
NWD-102886
(5) Confirm that both SNMP Service and SNMP Trap Service are Stopped, and the startup
condition for each is shown as Manual.
- 15 -
NWD-102886
4.
PNMSj Setup
NOTE
If PNMSj software has already been installed, please uninstall
it before installing a new version.
(1) Specify the folder for the PNMSj installation software. Double-click on install.exe.
(The installer can be found in the PnmsSetupDisk (Rev.x.xx.xxx.xxx) folder)
( x.xx.xxx.xxx denotes the respective PNMS Version)
- 16 -
NWD-102886
(4) Specify the directory where the PNMSj is to be installed. Click [Next].
Choose:
Click this button to select another directory
- 17 -
NWD-102886
NOTE
The default path is C:\PNMSj. It is not possible to include
a multi byte character, blank space (e.g. as in Program
Files), or the following characters. (C denotes the
directory where the currently running OS is installed)
!" # $ % * , / : ; < = > ? [ \ ] ^ ` { | }
Choose:
Click this button to choose the license key file
NOTE
If no license key file is available, Application will run in trial
mode.
- 18 -
NWD-102886
(6) Specify the directory for storing PNMSj log files. Click [Next].
Choose:
Click this button to select another directory
NOTE
The default path is <PNMSj Install Directory> when a
Stored Directory is not specified. It is not possible to
include blank spaces as in Program Files.
- 19 -
NWD-102886
(7) Specify the desired operation mode as regards from the window below. Click [Next].
NOTE
It is prohibited to change the installed directory and settings
once the software is completely installed. If required, you
must reinstall the application software (for detail please refer
to the Update Manual).
- 20 -
NWD-102886
- 21 -
NWD-102886
5.
5.1.
Firewall Setup
For Windows Server 2008
(1) Click Windows Firewall in the Control Panel window.
- 22 -
NWD-102886
- 23 -
NWD-102886
(5) Select javaw.exe from following PNMSj installation sub-folder the click [Open].
Path: [PNMS installation folder]\jre\bin\javaw.exe
- 24 -
NWD-102886
- 25 -
NWD-102886
5.2.
(2)
- 26 -
NWD-102886
(3)
For Windows Server 2008 R2 : Click Allow a program or feature through Windows Firewall.
For Windows Server 2012 R2 : Click Allow an app or feature through Windows Firewall.
(4)
- 27 -
NWD-102886
(5)
Click on [Browse...].
- 28 -
NWD-102886
(6) Select the javaw.exe from the following PNMSj installed directory sub-folder and click
[Open].
Path: [PNMS installation folder]\jre\bin\javaw.exe
- 29 -
NWD-102886
(8) Confirm that the Java(TM) Platform SE binary checkbox has been checked.
Note:
The both boxes under Home/Work (Private) and Public categories has to be checked off.
- 30 -
NWD-102886
6.
Launching PNMS
(2) Type user name and password. Select the Connection Entry:
After installation of PNMS, the initial password status will be.
User name: admin
Password:
NOTE
If another application is using the SNMP Port, application
initialization will not be possible. Instead, application will show
following message and then will shutdown.
- 31 -