Professional Documents
Culture Documents
SYSTIMAX Solutions
www.commscope.com
Description
12A2 cable clamp for non-metallic fiber optic cable
How to Contact Us
To find out more about CommScope products, visit us on the web at http://www.commscope.com/
Within the United States, contact your local account representative or technical support at
1-800-344-0223. Outside the United States, contact your local account representative or
Authorized Business Partner.
Within the United States, report any missing/damaged parts or any other issues to
CommScope Customer Claims at 1-866-539-2795. Outside the United States, contact your
local account representative or Authorized Business Partner.
Parts List
Verify parts against the parts list below:
Quantity
2
2
1
1
1
2
1
2
2
1
Description
Cable clamp halves
V-Groove inserts
3/4 (19 mm) round insert
Clamp mounting bracket
Flat washer 1/4
Hex nuts 1/4-20
Screw 1/4-20 x 1-3/4
Screws (AB) 8 x 1/2
Screws 6-32 x 3/16
Instruction Sheet
Page 1 of 3
860429539
Instruction Sheet
Page 2 of 3
www.commscope.com
www.commscope.com
860429539
Issue 2, June 2013
Less than 0.40 inch (10mm) build up cable diameter with tape to approximately 0.40 inch (10mm) and
use two V-groove inserts
0.60 to 0.74 inch (15 to 19mm) use one V-groove insert and the 3/4-inch (19mm) insert
5. Place cable within clamp half previously secured with nut and position second clamp half over it as shown.
Insert assembly onto 1/4 x 1-3/4 mounting screw. Install flat washer and nut on screw and tighten using 216tool. See figure below.
Page 3 of 3