Professional Documents
Culture Documents
Name
MATRIX NO
: 08DKM14F1153
CLASS
: DKM 2C
DATE
: 7 JANUARY 2015
LECTURES NAME
INTRODUCTION TO
MACHINE (Lathe)
Lathe is a machine that removed metal from the work piece to the
required shape and sizes. Lathe machine also used to do works
such as cutting, drilling, removing screws, grinding and shading.
There are many types of lathe machine such as speed lathe,
bench lathe and tool room lathe machine.
The cutting process is done by moving the tool bits into the work
piece that is turning. The tool bits is place vertically to the work
piece or in the right angle to the axis of the work piece to get the
cutting process done.
The tool bits needs to be grind before using it to the work piece.
Objectives
1. To know the basic of workshop process
2. To understand the functions of each parts of lathe machine
3. To understand how the tool bits is work with the work pieces
4. To understand the shape of the tool bits and its functions.
5. To adopt safety precaution on gridding and turning process.
6. To train students to use gauges with more efficient.
Safety Precautions
1. Make sure wear safety boots before start doing
workshop practices.
2. Make sure the work place is clean and unharmed.
3. Always wear safety glasses or goggles when using
hand tools or powered machine tools
4. Be careful while doing work such as grinding and
cutting the work piece.
5. Tell the instructor or lecture on duty if any accidents
happen.
6. Know where the First Aid Kit, fire extinguisher and
any safety equipment are located in the
workshop/laboratory.
7. Do not joking around the work area when working or
when the machine is on.
8. Clean all the work area and the machines after work
is done.
9. Switch of the machine and all the switches before
leaving the laboratory/workshop.
Equipment
1. Tool Bits
2. Vernier caliper
3. Spanner
4. Safety Goggles
5. Hammer
Project Drawing
Procedures
1. By using saw, cut a work piece that needed. The
length of the work piece is
Discussion
Conclusion