Professional Documents
Culture Documents
GENERAL BRIEFING
V1.1
12 January 2006
CRUISE MANAGEMENT
TABLE OF CONTENTS
Introduction............................................................................................................ 3
Climb Before Cruise Segment ............................................................................... 3
Initial Altitude ......................................................................................................... 3
PA Announcements ............................................................................................... 3
Roster.................................................................................................................... 4
ATC/Traffic Situation.............................................................................................. 4
Some guidelines: ................................................................................................... 5
Flight Progress ...................................................................................................... 6
Weather................................................................................................................. 7
Enroute Climb Planning ......................................................................................... 8
COST INDEX......................................................................................................... 9
Off Track Diversions ............................................................................................ 10
SUMMARY .......................................................................................................... 10
1 of 10
CRUISE MANAGEMENT
GENERAL BRIEFING
V1.1
12 January 2006
Revision Record
Version
1
Date
Source
Change
Reason
11/01/07
FOT
Subject matter
updated.
Explanation of
Cost Index
added.
S. Howard
P. Donazzan
Page/s
All
FOT Library
Introduction.
Aerodynamic
section moved
to its own
Aircraft
Performance
and
Aerodynamics
General
Briefing
Disclaimer:
This briefing remains the property of QANTAS. Copying for other than students
own use is illegal. The subject content of this brief is correct at the time of
publishing. In any case, the Flight Crew Operations Manuals are the
authoritative documents. It is the responsibility of users to ensure that they are
aware of changes or corrections to subject matter circulated by QANTAS.
2 of 10
CRUISE MANAGEMENT
GENERAL BRIEFING
V1.1
12 January 2006
INTRODUCTION
Efficient cruise management has many elements. The main aim is to achieve full
situational awareness (S/A) and stay well ahead of the aircraft.
INITIAL ALTITUDE
Having arrived at cruising level, it is prudent to do a full panel scan to ensure that all
systems and switches are in the correct status/position for cruise flight. Check that
the aircraft is performing correctly for the desired cruise regime, and then commence
your management routine as outlined below.
PA ANNOUNCEMENTS
Awareness of the situation in the cabin is a precursor to making non-intrusive, routine
PA announcements. Operational PAs (e.g. after illumination of the Fasten Seat Belt
Sign) can be made at any time. In liaising with the CSM prior to departure, the
Captain should have details of the anticipated cabin service for the sector.
Announcements on the ground are well covered in the FAM; as is content of in-flight
PAs.
Generally, the pilot flying should make no announcements below 20,000. For
daylight departures, the best time is in cruise following top of climb. At this stage, a
meal/bar service would be underway in the cabin, the welcome aboard video
finished and passengers awake. On some types the use of the PA does not freeze
the inflight entertainment but on all types the flight deck PA will override all
communications in the cabin.
Night departures require additional thought. On some sectors most passengers stay
awake for a meal etc. However, on others (e.g. BKK-LHR), some may well be asleep
3 of 10
CRUISE MANAGEMENT
GENERAL BRIEFING
V1.1
12 January 2006
by 10,000'. In the latter case a brief introduction followed by very basic flight details
and a caution on seat belt fastening while seated should suffice. Thus a brief PA
above 20,000' is less likely to distract the operating pilot from the task and minimises
annoyance for those pax who are already asleep.
ROSTER
Flight Crew must be aware that Flight Time Limitations are laid down by the CAOs.
The FAM requires us to manage the flight deck duty time for inflight relief. In the
past, more information was provided on rostering requirements, but as crew sizes
and sector lengths increased, formal advice on calculation of flight deck duty ceased.
Rostering of four pilot crews on the long-range aircraft is easy, with the use of the 2person team - one team working, one resting. Similarly, a 3 pilot crew on advanced
flight decks means simply dividing the cruise time by 3 and then splitting the answer
into sensible breaks. The convention for teams is 2 hours on/2 hours off and for 3
crew an initial break of up to an hour, then one-hour off for the second break. It is
wise to use the previously laid down procedure of calling off-duty crew 5 minutes
prior to their scheduled return so that they can prepare themselves, especially if
they've been asleep. . Modern research has shown that it can take some time to
become fully functional after waking from a deep sleep, especially in the early hours
of the morning. A returning crewmember usually comes on watch (in a non-team
situation) with at least one other crewmember who is au fait with the operation and
awake. However, the person returning from the last break prior to TOD may need a
little extra time (e.g. fully occupied toilets on the 747-3 or 767), so don't cram the
roster too close to TOD.
The use of a Flight Engineer on the B747 means that a Second Officer has to provide
panel coverage. Thus, the cruise time is divided by 4 and breaks allocated, with the
E/O traditionally having his time off last. At the E/O's request, it may be
advantageous to give him his long break first, since any reduction in cruise time will
cut into his break.
On rare occasions, there may be situations where the Captain, as commander of the
aircraft and with the overall responsibility for the operation, may need to take more
time off. This can occur, for example, after a delayed departure where the crew have
extended their duty time facing a demanding arrival at destination with a potential
diversion. It is imperative that the Captain be functioning 100% in this type of
situation and extra time off may be warranted.
It has also become practice to note the Volmet frequencies, times and weathers
required on the roster sheet. This is a handy place to put them as we all look at the
roster from time to time, thus we can be reminded of the weathers needed by the PF.
Finally, there are times when specific crewmembers should be on duty. Such as, the
Captain being on duty approaching DPA with a deteriorating destination weather. At
these times, the crewmember preparing the roster must ensure that the required
crew are on duty.
ATC/TRAFFIC SITUATION
At locations where delay or congestion is known to occur, Qantas staff at the briefing
counter may provide a summary of same direction flights with departure times. This
can be very useful, both in predicting chances of an altitude blockage and enabling
4 of 10
CRUISE MANAGEMENT
GENERAL BRIEFING
V1.1
12 January 2006
SOME GUIDELINES:
Call on a nominated interpilot frequency (e.g. 123.45mHz for the Pacific Basin)
If no contact and/or the aircraft is known to be equipped with ACARS (e.g. B747,
767, MD11, A330/340, etc.) and outside continental USA/Europe/Asia, call on 121.5,
nominating a reply on either; (a) interpilot frequency, or (b) the nearest company
ground station frequency (the FIR manager won't be using it as an ATC frequency.)
5 of 10
CRUISE MANAGEMENT
GENERAL BRIEFING
V1.1
12 January 2006
FLIGHT PROGRESS
There is no intention here to cover a complete analysis of the subject; that's better
left to the excellent Fuel Courses run by Flight Training. However, there are some
trends in flight progress which are worth noting.
One of the first things to consider is the management priority of maintaining schedule
v fuel usage. QF aircraft are operated to a Minimum Cost Cruise [MCC] by setting a
Cost Index in the FMC of those types so equipped and setting a variable Mach No.
on the B747-300. The FAM gives Captains the flexibility to operate at a different
schedule, but we should always remember that fuel has become the number one
cost that we can control.
The monitoring of fuel usage verses time is carried out in Qantas by tabulating actual
fuel remaining at a position, then comparing this with the planned fuel remaining, and
similarly comparing ATA v ETA at that position. Thus, down the right hand side of
the nav log, there evolves a running summary of fuel trend.
A normal ahead/behind datum is approx. 200kgs(B744/747) , 100kgs (A330/B767)
or 60kg (737) for each minute of time. This can be fine-tuned for actual fuel flow if
required. Apparent discrepancies can be caused by under/overfuelling, long/short
taxi, longer than normal ground running of the APU, extended flight departure (with or
without set heading allowance), extensive use of bleed air for anti-icing, or not
climbing in the leg where the fuel was allowed in the plan. What is important here is
that an increasing discrepancy must be accounted for otherwise the possibility of a
fuel leak must be considered.
Assuming cruise has been as planned, a slow loss of fuel may indicate poor trim,
anti-ice unwittingly left on (e.g. There is NO indication of wing anti-ice in use on the
747-300), mis-rigged controls, or loose/missing panels. A trim check and full panel
scan may help solve the problem.
There are some traps associated with flight progress which do not normally cause
any concern, but may be a big problem when fuel over destination is marginal. The
worst case is being ahead on time and behind on fuel. Be aware that
DPA/DPD/DP1/DPE are all geographical positions, not simply times! Thus, when we
are ahead on time, but behind on fuel, we arrive at the DP position earlier than
6 of 10
CRUISE MANAGEMENT
GENERAL BRIEFING
V1.1
12 January 2006
planned, but with less fuel. This may require some recalculation, but even worse is to
wait until the time and then check the DP fuel, finding that we have to divert, but have
inadequate fuel!
The flight planning system and fuel policy was specifically tailored to make DPA a
position fix/waypoint on the plan, as distinct from PNR, which usually fell between
waypoints. However, the other DP points are normally between waypoints and this
should be considered in considering our fuel situation. If required, these DP point/s
may be entered in the FMC and so provide a pictorial reminder of their location.
It is worth noting that DP positions can be adjusted inflight. In the case of DPA the
dispatcher has to choose from a menu provided for the particular route sector in the
Phoenix system. The Nav Analyst who determines the ports available for DPA on a
particular route is constrained by the CAA Ops Spec wherein our term DPA is really a
PNR. Thus, the DPA ports available to the dispatcher will never normally be beyond
the destination. However, the definition in the FAM talks about the position on the
fuel flight plan furthest removed from the departure airport to divert to a suitable
airport with all engines operating. Inflight, we can always use any suitable airport for
DPA calculation with the caution that for a port beyond destination, fuel to DP port
will be greater than that to destination, unless the destination has an operational
requirement (e.g. w/x hold, ATC hold, alternate, etc.)
A similar caution should be issued anytime the fuel to DPA port is greater than that to
destination. In 99% of cases, with the weather at destination fine, we have the
required fuel to proceed to destination from well before the flight plan DPA. However,
if the destination weather is poor and we are down on fuel, there is a danger that we
may end up in no man's land for a portion of the flight, not complying with the inflight
fuel policy requirement to always be able to proceed to a suitable airport.
Continuing on the subject of DPA fuel requirements, it is considered good practice to
check the DPA fuel calculation. Naturally, you could use the computer figures from
the flight plan, but this would only really be checking that the computer can add
correctly! Use of the Inflight Diversion Fuel Requirements graph, which includes FFR
& VFR, will enable an independent check and is a handy page to use if recalculating
another DPA.
On FMC equipped aircraft, the flight plan winds are inserted against waypoints in the
RTE DATA page, with capacity on some later FMCs to enter multiple cruise altitude
winds (refer type FCOM). These entries are blended by the FMC with current
measured wind to enhance performance predictions for target speeds, fuel burn and
ETAs. Firstly, in the multiple case, there's no use in putting in every altitude W/V
shown on the flight plan Enroute Spot Wind Data if you are incapable of reaching
those altitudes (e.g. entering the 200mb/FL387 data for a B744 SIN-LHR prior to,
say, Calcutta. Secondly, interpilot communication may enable you to get actual winds
further ahead and/or at higher altitude to update those entered from the flight plan.
This will enhance the FMC cruise calculations to give you the best information.
WEATHER
At flight planning, we would have received forecasts valid for the time of anticipated
use at our destination, DP ports, and alternate/s (if required.) From a strictly legal
point of view (with the exception of an Isolated Airport which needs an alternate), we
need obtain no other weathers than these to complete the flight. However, we should
all agree that it would be poor airmanship indeed not to update that information
inflight where the facilities are available.
7 of 10
CRUISE MANAGEMENT
GENERAL BRIEFING
V1.1
12 January 2006
Some of us can remember flying to Europe from, say, Bahrain, when the Captain
requested arrival weather from the HF volmet as soon as the gear was in the wheel
wells! Others said, We are going there anyway and did not bother. How do we find a
philosophy which is both practical and embodies good airmanship?
Since all sectors over 1000nm have a DPA shown on the flight plan, the first principle
we could suggest is that an updated actual weather at the destination be obtained
prior to DPA. This may be enough to confirm the forecast, and, if fine, no more need
be done. However, if an alternate is required, it is also advisable to obtain actual
weather for the alternate. In this case, the fuel remaining at destination may permit
diversion to more ports than the nominated alternate, so these could be obtained too,
in order to keep our options open.
Of course, with most international 24/18hr forecasts being issued 6 hourly and some
regions issuing 9hr forecasts 2 hourly, it is often prudent on longer flights to monitor
any change in the updated forecast which could affect your arrival. If these show a
deteriorating trend, the actual weathers can then be monitored more closely to give
an expectation of the arrival conditions. This will help with Approach/Diversion
planning discussed later.
Thus, the degree of emphasis we give to obtaining both actual weathers and revised
forecasts enroute will depend upon the urgency of the situation on the day. Confirm
that all is well without fuss on a fine day (avoiding complacency - not bothering at all!)
and monitor trends on a questionable day. This trend monitoring need not commence
until within reasonable range of the destination and before DPA. Simply treat the task
as one of Gathering in the G.R.A.D.E. process.
Another principle concerns the possible enroute diversion ports. Forecasts for these
ports may not be provided in the preflight Qantas documentation. Some authorities
require that a separate local preflight Met Briefing be given to crews and the TAFs for
enroute ports may be contained therein. However, while passing these locations, a
local weather observation, ATIS, or even a forecast can be obtained to have some
idea of conditions should you suddenly have to divert unplanned or in an emergency.
Often another flight will be heard on VHF requesting a weather you may want. You
can then quickly copy it down because of your situational awareness and save
bothering someone later.
To summarise, the preflight forecast covers the legal requirement for weather
information. Good airmanship dictates that at least an actual weather at destination
be obtained prior to DPA, with trend monitoring of actual and revised forecasts for
relevant ports being obtained if the weather is questionable. Similarly, obtain weather
for possible enroute diversion ports, when passing, to check their suitability in an
emergency.
CRUISE MANAGEMENT
GENERAL BRIEFING
V1.1
12 January 2006
Start Weight are again relevant here. Be cautious too, of the reduced buffet margins
available with turbulence, and temperature inversions in the vicinity of Cb activity!
Generally, however, it is far better to accept being held down and simply reduce the
Mach No. in accordance with the MCC schedule for the type. The fuel loss will be
small for a few hours and buffet margins are preserved. On B744 aircraft, using the
PERF INIT page to change the STEP SIZE from ICAO to 0 will optimise performance
at the current altitude and the FMC calculations of destination fuel/ETA will be more
accurate.
Returning to our monitoring of other traffic to achieve a tactical advantage, when we
know we are approaching a climb point, we may be able to manoeuvre ourselves to
fit a slot at the higher level while maintaining the relevant separation standard. This
may involve achieving an ETA at a certain point and/or cruising at the current or
higher altitude at a Mach No. above or below MCC. The keynotes here are knowing
your aircraft, the ATC system and being flexible in your thinking; the permutations
and combinations are many.
As mentioned above, obtaining actual winds from other aircraft further ahead and/or
at other altitudes will also assist in making a climb decision. These winds may be
inserted into the FMC to provide a real time picture.
Optimum Altitude for some given weight refers to optimising NAM/Kg. Where
windshear with altitude is present, better ground mileage may be had at some other
flight level.
Speed reduction
Orbit or racetrack
A zigzag track at 60 degrees to the flight plan course (ATC clearance) which
doubles the track miles and elapsed time.
Carefully consider the option or combination of options which is/are safest and best
suited to the particular circumstances and negotiate approval with ATC if required.
When choosing the speed reduction method it is inadvisable to reduce below your
optimum holding speed/ minimum drag speed (Vimd).
Note: If the speed is reduced below Vimd and turbulence is encountered, high thrust
may be required to prevent excessive speed loss. Further should an actual engine
failure occur, an immediate descent may be required to prevent a stall.
COST INDEX
A quick review of cost index.
COST INDEX. The Flight Management Computer (FMC)/ Flight Management
Guidance and Envelope Computer (FMGEC), as fitted, uses Cost Index (CI) to
optimise performance calculations. The cost index is defined as:
Cost Index (CI) = Cost Of Time in dollars/hour
Cost Of Fuel cents/pound
9 of 10
CRUISE MANAGEMENT
GENERAL BRIEFING
V1.1
12 January 2006
Cost index is used by the FMC to calculate economy climb, cruise and descent
speeds and optimum altitude, for minimum trip cost. Use of cost index allows Qantas
to determine the most economical speeds of operation. In addition, cost index can be
adjusted to account for cost differences between routes or changes in cost structure
over time.
A cost index of zero means that the cost of time equals zero. The economy speeds
for CI = 0 result in minimum trip fuel; the aircraft will climb at close to the best rate of
climb speed, cruise at Maximum Range Cruise Speed, and descend near minimum
drag speed. High cost index values mean that the cost of time is considered to be
high relative to the cost of fuel, and the economy speeds at very high CI values will
therefore result in minimum trip time but an increased fuel cost.
The determination of cost index values for use in the FMC presents a challenging
problem for Qantas. While the cost of fuel is a known value, the cost of time is much
more difficult to determine. The cost of time includes those costs, which vary as a
function of flight time, which are primarily the airframe and engine maintenance
costs.
Additionally, time costs can include any components of direct operating costs
accounted for on the basis of cost per hour of aircraft operation. These may include
crew pay, insurance and depreciation.
SUMMARY
Good cruise management requires strong situational awareness. The professional
flight crew, working as a team, will take up any opportunity to improve the overall
efficiency of the aircraft operation, whilst being mindful of the primary concerns of
safety and passenger comfort.
10 of 10