Professional Documents
Culture Documents
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: sphere
Command: rotate3d
Initializing...
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Command:
Command: sphere
Current wire frame density:
ISOLINES=4
Specify center of sphere
<0,0,0>:
Specify radius of sphere or
[Diameter]: 3
Command:
Command:
Command: _shademode
Current mode: Flat
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <Flat>: _3
Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 4
Specify width: 1
Specify height: 2
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 10.0000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius
<10.0000>: *Cancel*
1 edge(s) selected for fillet.
No fillet to be computed.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 10.0000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius
<10.0000>: *Cancel*
1 edge(s) selected for fillet.
No fillet to be computed.
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 10.0000
Select first object or
[Polyline/Radius/Trim]:
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90
Command:
Command: Specify opposite
corner: *Cancel*
Command: _u ROTATE3D
Command: rotate3d
Command:
Command: m
MOVE 1 found
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: *Cancel*
Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 7
Command: m
MOVE
Select objects: 1 found
Command: *Cancel*
Specify width: 1
Specify height: 4
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command:
Command:
Command: _shademode
Current mode: Flat
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <Flat>: _3
Command:
Command: _.erase 1 found
Command:
Command: Specify opposite
corner:
Command:
Command: *Cancel*
Command:
Command:
Command: _.erase 2 found
Command: *Cancel*
Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 7
Specify width: 1
Specify height: 2
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 2.0000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <2.0000>:
2
Select an edge or
[Chain/Radius]:
Edge has already been
picked.
Select an edge or
[Chain/Radius]:
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: mi
MIRROR
Select objects: 1 found
Select objects:
Specify first point of mirror
line: Specify second point of
mirror line:
*Cancel*
Command: mi
MIRROR
Select objects: 1 found
Select objects:
Specify first point of mirror
line: Specify second point of
mirror line:
*Cancel*
Command: copy
Select objects: Specify
opposite corner: 1 found
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Select objects: 1 found
Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Select an edge or
[Chain/Radius]:
Command: m
MOVE
Select objects: 1 found
Command: copy
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 30
Specify width: 5
Specify height: 0.5
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 2.0000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <2.0000>:
1
Select an edge or
[Chain/Radius]:
Edge has already been
picked.
Select an edge or
[Chain/Radius]:
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: copy
Command:
Command: copy
1 found
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: cylinder
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: copy
Select objects: 1 found
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command:
Command: m
MOVE 1 found
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command: m
MOVE
Select objects: Specify
opposite corner: 0 found
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command: m
MOVE 1 found
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_top Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command:
Command: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _ddvpoint
Initializing... DDVPOINT
loaded.
Command:
Command:
Command: _shademode
Current mode: Flat
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <Flat>: _3
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_right Regenerating model.
Command: Specify opposite
corner:
Command: m
MOVE 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command: _.erase 1 found
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 6
Specify next point or
[Undo]:
Specify next point or
[Close/Undo]: *Cancel*
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects: 1 found (1
duplicate), 1 total
Select objects: 1 found (1
duplicate), 1 total
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 6
Specify next point or
[Undo]: *Cancel*
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _3
Command: _u
INTELLIZOOM GROUP
Command: _u 3DORBIT
GROUP Regenerating
model.
Command: l
LINE Specify first point:
Specify next point or
[Undo]:
Specify next point or
[Undo]: *Cancel*
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command: copy
Select objects: 1 found
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
Command: copy
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command: _.erase 1 found
Command: cone
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Select objects: 1 found
Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
*Cancel*
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Select objects: 1 found
Select objects:
Specify first point on axis or
define axis by
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90
Command: _u ROTATE3D
Command: rotate3d
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command:
Command:
Command: _shademode
Current mode: Flat
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <Flat>: _3
Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 5
Specify width: 1
Command: rotate3d
Select objects:
Specify height: 6
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 90
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 1
Specify next point or
[Undo]:
Specify next point or
[Close/Undo]:
Command:
LINE Specify first point:
Specify next point or
[Undo]: 1
Specify next point or
[Undo]:
Specify next point or
[Close/Undo]:
Command: slice
Select objects: 1 found
Select objects:
Specify first point on slicing
plane by
[Object/Zaxis/View/XY/YZ
/ZX/3points]
<3points>:
Specify second point on
plane: *Cancel*
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 1
Specify next point or
[Undo]:
Specify next point or
[Close/Undo]:
Select objects:
Command: _u FILLET
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 0.5000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <0.5000>:
*Cancel*
Command:
Command:
Command:
Command: _.erase 3 found
No fillet to be computed.
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 0.5000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <0.5000>:
*Cancel*
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 0.5000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <0.5000>:
1
Select an edge or
[Chain/Radius]:
Select an edge or
[Chain/Radius]: *Cancel*
No fillet to be computed.
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 0.5000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <0.5000>:
0.2
No fillet to be computed.
Select an edge or
[Chain/Radius]:
Edge has already been
picked.
Select an edge or
[Chain/Radius]:
Select an edge or
[Chain/Radius]:
2 edge(s) selected for fillet.
Command: _u
INTELLIZOOM
Command: _u
INTELLIZOOM
Command: f
FILLET
Current settings: Mode =
TRIM, Radius = 0.5000
Select first object or
[Polyline/Radius/Trim]:
Enter fillet radius <0.5000>:
1
Select an edge or
[Chain/Radius]:
Edge has already been
picked.
Select an edge or
[Chain/Radius]:
Select an edge or
[Chain/Radius]:
2 edge(s) selected for fillet.
Command: l
LINE Specify first point:
Command: box
Specify corner of box or
[CEnter] <0,0,0>:
Specify corner or
[Cube/Length]: l
Specify length: 2
Specify width: 0.2
Specify height: 5
Command: cylinder
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 8
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 1
Command: rotate3d
Current positive angle:
ANGDIR=counterclockwise
ANGBASE=0
Command: m*Cancel*
Command: copy
Select objects:
Select objects:
Specify base point or
displacement, or [Multiple]:
Specify second point of
displacement or <use first
point as displacement>:
*Cancel*
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 8
Command: copy
Command: m
MOVE
Select objects: Specify
opposite corner: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command: m
MOVE 1 found
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_swiso Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: cylinder
Current wire frame density:
ISOLINES=4
Specify center point for base
of cylinder or [Elliptical]
<0,0,0>:
[Object/Last/View/Xaxis/Ya
xis/Zaxis/2points]: Specify
second point on axis:
Specify rotation angle or
[Reference]: 30
Command: l
LINE Specify first point:
*Cancel*
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_bottom Regenerating
model.
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 6
Specify next point or
[Undo]:
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command: m
MOVE
Select objects: 1 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>: *Cancel*
Command:
Command: _.erase 1 found
Select objects:
Specify first point on axis or
define axis by
Command: l
LINE Specify first point:
Specify next point or
[Undo]: 2
MOVE
Select objects: Specify
opposite corner: 6 found
Select objects:
Specify base point or
displacement: Specify
second point of
displacement or
<use first point as
displacement>:
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _-view Enter an
option
[?/Orthographic/Delete/Rest
ore/Save/Ucs/Window]:
_seiso Regenerating model.
Command:
Command:
Command: _shademode
Current mode: 3D
wireframe
Enter option [2D
wireframe/3D
wireframe/Hidden/Flat/Gour
aud/fLat+edges/gOuraud+ed
ges] <3D wireframe>: _f
Command: '_3dorbit Press
ESC or ENTER to exit, or
right-click to display
shortcut-menu.
Regenerating model.
Command:
Command:
Command: _ucs
Current ucs name: *NO
NAME*
Enter an option
[New/Move/orthoGraphic/P
rev/Restore/Save/Del/Apply
/?/World]
<World>: _3
Specify new origin point
<0,0,0>:
Specify point on positive
portion of X-axis
<3.3542,1.6630,-3.2660>:
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 30
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Command:
Command:
Command: _dimradius
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Object selected is not a
circle or arc.
plane
<30.0047,2.0000,0.0000>:
Points are colinear
Specify point on positive-Y
portion of the UCS XY
plane
<30.0047,2.0000,0.0000>:
Command:
Command:
Command: _dimradius
Select arc or circle:
Dimension text = 2
Specify dimension line
location or
[Mtext/Text/Angle]:
*Cancel*
Command:
Command:
Command: _dimradius
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Object selected is not a
circle or arc.
Select arc or circle:
Dimension text = 3
Specify dimension line
location or
[Mtext/Text/Angle]:
*Cancel*
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Specify second extension
line origin:
Specify dimension line
location or
[Mtext/Text/Angle/Horizont
al/Vertical/Rotated]:
Dimension text = 0.5
Command:
Command:
Command: _dimlinear
Specify first extension line
origin or <select object>:
Command: _qsave