Professional Documents
Culture Documents
1 de 8
http://www.schneordesign.com/Avi/Makita/makita_mod1.htm
Warning:
1- This mod is NOT recommended by me
nor by Makita and will void product warranty !
If you follow this mod, you do it on your own risk !
2- I have received several comments that described
same model # but with different design and components.
Please beware that this mod might not work on your charger
or worst, will damage it.
Only perform this mod if you know your way around with electronics !
3- I got a genuine 220V DC18RA-T charger P/N:630508-6 to compare
(see image)
This charger has much more changes from my mod.
Due to this, please consider if you are willing to take the chance.
DC18RA T charger is for charging:
- Makita Li-ion batteries type BL1815, BL1430/A, BL1830
- Makita various Ni-MH batteries (see charger manual)
image of Makita DC18RA T charger
19/06/2013 12:54
2 de 8
http://www.schneordesign.com/Avi/Makita/makita_mod1.htm
_Electrolytic capacitor 22F 450V (or 400V) with Max. diameter of 13mm
Note: Take extra care to capacitor polarity when you place it
19/06/2013 12:54
3 de 8
http://www.schneordesign.com/Avi/Makita/makita_mod1.htm
5
6
_Mains Plug
_For safer and secure operation, cut the US plug and add a mains plug according to the
standard used in your country.
The US supplied wire comes without earth wire so you don't need to worry of it.
19/06/2013 12:54
4 de 8
http://www.schneordesign.com/Avi/Makita/makita_mod1.htm
in case you also replace the MOSFET, here is an image to show its location
19/06/2013 12:54
5 de 8
http://www.schneordesign.com/Avi/Makita/makita_mod1.htm
C. Assemble the PCB to the housing, make sure the battery contacts module is in place with its spring
D. Voila - you now have a working 220-240VAC Makita DC18RA T charger.
19/06/2013 12:54
6 de 8
http://www.schneordesign.com/Avi/Makita/makita_mod1.htm
Have fun and make good use of your fine Makita tools.
19/06/2013 12:54
7 de 8
http://www.schneordesign.com/Avi/Makita/makita_mod1.htm
Please Donate: If this page helped you and/or saved you some $$$, please consider donate a
small fee
to help me cover hosting cost of such pages. You can do so by clicking the next PayPal button.
19/06/2013 12:54
8 de 8
http://www.schneordesign.com/Avi/Makita/makita_mod1.htm
19/06/2013 12:54