Professional Documents
Culture Documents
The radian measure of the angle uses k = 1, making the angle of a full circle 2
radians. The SI system of units uses radians as the (derived) unit for angles. This
is also roughly subdivided into the mil, which has several definitions in practice.
Because of the simple relationship to arc length, radians are a special unit. For
example, sines and cosines whose argument is in radians are derivatives of each
other (modulo ). The radian is abbreviated rad.
The degree measure of the angle uses k = 360/2, making the angle of a full circle
360 degrees. The symbol for degrees is a small superscript circle, as in 360. One
radian is about 57 and one degree is /180 rad 0.0175 rad.
o Fractions of a degree may be written as a decimal degree, e.g. 42.3753,
but for historic reasons they are also commonly expressed in sexagesimal
or degree-minute-second format, using minutes of arc, which are 1/60th of
a degree, and seconds of arc, which are 1/60th of a minute of arc and
1/3600th of a degree. The minute of arc is symbolized by a single prime,
and the second of arc by a double prime, e.g. 42 22 31. An intermediate
format with decimal minutes is also used, e.g. 42 22.52.
o Minutes of arc are commonly encountered in discussions of external
ballistics, as a minute of arc covers almost exactly 1 inch at 100 yards (1
m at 1200 m). A rifle capable of shooting "1 MOA", one minute of arc,
can place all shots within 1 inch at 100 yards, 2 inches at 200 yards, etc.
Minutes of arc are also used in navigation: a nautical mile was historically
defined as a minute of arc along a great circle of the Earth. Seconds of arc
routinely show up in astronomical applications, as most objects in the sky
have tiny angular diameters (e.g. Venus varies between 10 and 60).
The grad, also called grade, gradian, or gon, uses k = 400/2, making the angle of
a full circle 400 grads, and a right angle 100 grads. It is used mostly in
triangulation, and represents the percentage rise or grade of a slope (such as a hill,
roof, path, or road).
The point uses k = 32/2, making the angle of a full circle 32 points. One point is
exactly 11.25. The point is used in navigation.
The full circle or full turns or cycle or rotation or revolution uses k = 1/2, making
the angle of a full circle exactly 1; it represents the number or fraction of
complete full turns. For example, /2 rad = 90 = 1/4 full circle. The rotation and
revolution are abbreviated rot and rev, respectively, but may also be abbreviated
as r, as in rpm (revolutions per minute).
Conventions on measurement
A convention universally adopted in mathematical writing is that angles given a sign are
positive angles if measured counterclockwise, and negative angles if measured
clockwise, from a given line. If no line is specified, it can be assumed to be the x-axis in
the Cartesian plane. In navigation, bearings are measured from north, increasing
clockwise, so a bearing of 45 is north-east. Negative bearings are not used in navigation,
so north-west is 315.
In mathematics radians are assumed unless specified otherwise because this removes the
arbitrariness of the number 360 in the degree system and because the trigonometric
functions can be developed into particularly simple Taylor series if their arguments are
specified in radians.
Types of angles
An angle of /2 radians or 90, one-quarter of the full circle is called a right angle.
Two line segments, rays, or lines (or any combination) which form a right angle are said
to be either perpendicular or orthogonal:
Right angle
Acute, obtuse, and straight angles (a, b, c). Here, a and b are
supplement angles.
Angles smaller than a right angle are called acute angles (less than 90 degrees)
Angles larger than a right angle are called obtuse angles (more than 90 degrees,
less than 180).
Angles equal to two right angles are called straight angles (equal to 180 degrees).
Angles larger than two right angles are called reflex angles (more than 180
degrees).
The difference between an acute angle and a right angle is termed the
complement of the angle
The difference between an angle and two right angles is termed the supplement
of the angle.
Some facts
In Euclidean geometry, the inner angles of a triangle add up to radians or 180; the
inner angles of a simple quadrilateral add up to 2 radians or 360. In general, the inner
angles of a simple polygon with n sides add up to (n 2) radians or (n 2) 180.
If two straight lines intersect, four angles are formed. Each one has an equal measure to
the angle across from it; these congruent angles are called vertical angles.
If a straight transversal line intersects two parallel lines, corresponding (alternate) angles
at the two points of intersection are equal; adjacent angles are supplementary, that is they
add to radians or 180.
A formal definition
Using trigonometric functions
A Euclidean angle is completely determined by the corresponding right triangle. In
particular, if is a Euclidean angle, it is true that
and
for two numbers x and y. So an angle can be legitimately given by two numbers x and y.
To the ratio
there correspond two angles in the geometric range 0 < < 2, since
Using rotations
Suppose we have two unit vectors and in the euclidean plane
. Then there exists
one positive isometry (a rotation), and one only, from
to
that maps u onto v. Let r
be such a rotation. Then the relation
defined by
is an equivalence
into , then
is a bijection, which means we can identify any angle with a
number between 0 and 2.
This allows one to define angles in any real inner product space, replacing the Euclidean
dot product by the Hilbert space inner product <,>.
The angle between a line and a curve (mixed angle) or between two intersecting curves
(curvilinear angle) is defined to be the angle between the tangents at the point of
intersection. Various names (now rarely, if ever, used) have been given to particular
cases:amphicyrtic (Gr. , on both sides, , convex) or cissoidal (Gr. ,
ivy), biconvex; xystroidal or sistroidal (Gr. , a tool for scraping), concavoconvex; amphicoelic (Gr. , a hollow) or angulus lunularis, biconcave.
Two intersecting planes form an angle, called their dihedral angle. It is defined as the
acute angle between two lines normal to the planes.
Also a plane and an intersecting line form an angle. This angle is equal to ninety degrees
minus the angle between the intersecting line and the line that goes through the point of
intersection and is normal to the plane.
Angles in astronomy
In astronomy, one can measure the angular separation of two stars by imagining two
lines through the Earth, each one intersecting one of the stars. Then the angle between
those lines can be measured; this is the angular separation between the two stars.
Astronomers also measure the apparent size of objects. For example, the full moon has an
angular measurement of approximately 0.5, when viewed from Earth. One could say,
"The Moon subtends an angle of half a degree." The small-angle formula can be used to
convert such an angular measurement into a distance/size ratio.