Professional Documents
Culture Documents
Issue
03
Date
2013-12-30
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 03 (2013-12-30)
MRFU Description
Contents
Contents
1 Introduction.................................................................................1
1.1 Appearance.........................................................................................................................................................1
1.2 Physical Ports.....................................................................................................................................................1
2 Technical Specifications.................................................................3
2.1 Frequency Band.................................................................................................................................................3
2.2 Capacity.............................................................................................................................................................4
2.3 Receiver Sensitivity...........................................................................................................................................4
2.4 Output Power.....................................................................................................................................................6
2.5 Power Consumption.........................................................................................................................................10
2.5.1 Power Consumption of the BTS3900.....................................................................................................10
2.5.2 Power Consumption of the BTS3900A..................................................................................................12
2.5.3 Power Consumption of the BTS3900L..................................................................................................13
2.5.4 Power Consumption of the BTS3900AL................................................................................................14
2.6 Equipment Specifications................................................................................................................................15
2.7 CPRI Port Specifications.................................................................................................................................15
Issue 03 (2013-12-30)
ii
MRFU Description
2 Technical Specifications
Introduction
The MRFU can be used in an indoor cabinet or a protective outdoor cabinet. The MRFU can
modulate, demodulate, combine, and divide baseband and RF signals. It also processes
baseband and RF signal data. With the Software Defined Radio (SDR) technology, the MRFU
can work either in GU or GL dual-mode through software configuration modification.
1.1 Appearance
Figure 1.1 shows the appearance of the MRFU.
Figure 1.1 Appearance of the MRFU
Issue 03 (2013-12-30)
MRFU Description
2 Technical Specifications
Connector
Quantity
Function
RF port
DIN
Connects to an antenna
Interconnection port
for receiving RF
signals
QMA female
Common public
radio interface
(CPRI) port
SFP female
3V3
MON port
RJ45
Issue 03 (2013-12-30)
MRFU Description
2 Technical Specifications
Technical Specifications
RX Frequency Band
(MHz)
900
890915
935960
1800
17101755
18051850
17401785
18351880
18501890
19301970
18701910
19501990
1900
RX Frequency Band
(MHz)
850
824846.5
869891.5
900
890915
935960
880915
925960
17101770
18051865
17251785
18201880
17101785
18051880
1800
1800
Issue 03 (2013-12-30)
MRFU Description
2 Technical Specifications
2.2 Capacity
Figure 1.1 Single-mode capacity
Mode
Capacity
GSM
UMTS
LTE
Capacity
GSM + UMTS
GSM + LTE
Frequency
Band (MHz)
1-Way
Receiver
Sensitivity
(dBm)
2-Way
Receiver
Sensitivity
(dBm)
4-Way
Receiver
Sensitivity
(dBm)
GSM
900/1800/1900
113
115.8
118.5 (theoretical
value)
UMTS
900/1900
125.5
128.3
131
LTE
1800
106.3
109.1
111.8
Issue 03 (2013-12-30)
MRFU Description
2 Technical Specifications
Frequency
Band (MHz)
1-Way
Receiver
Sensitivity
(dBm)
2-Way
Receiver
Sensitivity
(dBm)
4-Way
Receiver
Sensitivity
(dBm)
GSM
900 PGSM
113.5
116.3
119 (theoretical
value)
900 EGSM
113.3
116.1
118.8 (theoretical
value)
1800
113.8
116.6
119.3 (theoretical
value)
850
113
115.8
118.5 (theoretical
value)
850
125
127.8
130.5
900 PGSM
125.5
128.3
131
900 EGSM
125.3
128.1
130.8
900 PGSM
106.3
109.1
111.8
900 EGSM
106.1
108.9
111.6
1800
106.6
109.4
112.1
UMTS
LTE
Issue 03 (2013-12-30)
MRFU Description
2 Technical Specifications
The receiver sensitivity of GSM, as recommended in 3GPP TS 51.021, is measured in the central
band (80% of the entire operating band, excluding the edge band) at the antenna connector on the
condition that the channel rate is 13 kbit/s and the Bit Error Rate (BER) is not higher than 2%.
The receiver sensitivity of UMTS, as recommended in 3GPP TS 25.104, is measured in the entire
operating band at the antenna connector on the condition that the channel rate is 12.2 kbit/s and the
BER is not higher than 0.001.
The receiver sensitivity of LTE is measured, as recommended in 3GPP TS 36.104, under a 5 MHz
channel bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
MRFU modules operating in GSM mode and in the 900 or 1800 MHz frequency band comply with
the standard EN 301 502 V9.2.1.
MRFU modules operating in GSM mode and in the 850 or 1900 MHz frequency band comply with
the standard 3GPP TS 45.005 V10.2.0 & 3GPP TS 51.021 V10.2.0.
MRFU modules operating in UMTS, LTE, or Multi-Standard Radio (MSR) mode and in 900 or 1800
MHz frequency band comply with the standard ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104.
MRFU modules operating in UMTS, LTE, or Multi-Standard Radio (MSR) mode and in 850 or 1900
MHz frequency band comply with the standard 3GPP TS 37.104 V10.4.0 & TS 37.141 V10.4.0.
For the MRFU working in GSM mode, the maximum output power of each carrier on the MRFU is
60 W when the S1 configuration is applied. Note that, if the output power of 60 W is required, the
related license must be obtained.
For the MRFU V2 working in GSM mode and operating in the 900 MHz frequency band: after
design optimization, the 8PSK and GMSK modulation schemes enable the same output power for
each carrier on the MRFU V2 when the S1, S2, or S3 configuration is used. When the S4, S5, or S6
configuration is used, the license controlling the GBFD-118104 Enhanced EDGE Coverage feature
must be obtained. Otherwise, the 8PSK and GMSK modulation schemes cannot enable the same
output power for each carrier on the MRFU V2.
For the MRFU V2 working in GSM mode and operating in the 1800 MHz frequency band, the
license controlling the GBFD-118104 Enhanced EDGE Coverage feature must be obtained when the
S4, S5, or S6 configuration is used. Otherwise, the 8PSK and GMSK modulation schemes cannot
enable the same output power for each carrier on the MRFU V2.
The output power is 1 dB lesser than the standard power when the MRFU is located at a height of
3500 m to 4500 m; and is 2 dB lesser than the standard power when the MRFU is located at a height
of 4500 m to 6000 m.
Factors such as the site-to-site distance, frequency-reuse factor, power control algorithm, and traffic
model affect the gain achieved by dynamic power allocation. Therefore, in most cases, the network
planning can be based on the power specification achieved by dynamic power allocation.
In power sharing mode, the power control and DTX functions must be enabled. In GBSS8.1, the
dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD117501 Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic
power sharing feature can be used together with these features. However, the dynamic power sharing
feature currently cannot be used together with the GBFD-117002 IBCA (Interference Based Channel
Allocation), GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended
Cell features in GBSS8.1, GBSS9.0, and later versions.
Figure 1.1, Figure 1.2, and Figure 1.3 list the typical output power of the MRFU V1.
Issue 03 (2013-12-30)
MRFU Description
2 Technical Specifications
Figure 1.1 Typical output power of MRFU V1 (900 MHz/1800 MHz/1900 MHz, single-mode)
Numbe
r of
GSM
Carrier
s
Numbe
r of
UMTS
Carrier
s
Numbe
r of LTE
Carrier
s
Outpu
t
Power
per
GSM
Carrie
r (W)
Output
Sharing
Power
per
GSM
Carrier
(W)
Output
Power
per
UMTS
Carrier
(W)
Output
Power
per LTE
Carrier
(W)
60
60
40
40
27
31
20
27
12
20
10
16
60
40
3*
27*
4*
20*
1 (1T2R)
60
Number of
UMTS Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS Carrier
(W)
40
40
40
20
20
40
20
20
20
10
16
20
16
10
10
20
12
20
10
10
10
10
Issue 03 (2013-12-30)
MRFU Description
2 Technical Specifications
Number of LTE
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per LTE Carrier
(W)
40
40
20
40
20
10
16
20
15
10
12
20
10
20
Figure 1.4, Figure 1.5, and Figure 1.6 list the typical output power of the MRFU V2.
Two MRFU V2 modules are required to enable MIMO on the UMTS side.
Figure 1.4 Typical output power of MRFU V2 (850 MHz/900 MHz/1800 MHz, single-mode)
Numb
er of
GSM
Carrie
rs
Number
of UMTS
Carriers
Numbe
r of LTE
Carrier
s
Outpu
t
Power
per
GSM
Carrie
r (W)
Output
Sharing
Power
per
GSM
Carrier
(W)
Output
Power
per
UMTS
Carrier
(W)
Output
Power
per LTE
Carrier
(W)
60
60
40
40
27
31
20
27
16
20
12
20
60
1 (MIMO)
2 x 60
40
2 (MIMO)
2 x 40
3*
27*
Issue 03 (2013-12-30)
MRFU Description
2 Technical Specifications
Numb
er of
GSM
Carrie
rs
Number
of UMTS
Carriers
Numbe
r of LTE
Carrier
s
Outpu
t
Power
per
GSM
Carrie
r (W)
Output
Sharing
Power
per
GSM
Carrier
(W)
Output
Power
per
UMTS
Carrier
(W)
Output
Power
per LTE
Carrier
(W)
3 (MIMO)*
2 x 27*
4*
20*
4 (MIMO)*
2 x 20*
1 (1T2R)
60
Figure 1.5 Typical output power of MRFU V2 (850 MHz/900 MHz, GU MSR)
Number of
GSM
Carriers
Number of
UMTS
Carriers
Output Power
per GSM Carrier
(W)
Output Power
per UMTS Carrier
(W)
40
40
20
40
30
20
20
20
12
20
10
20
40
20
20
20
16
10
10
20
10
10
Issue 03 (2013-12-30)
MRFU Description
2 Technical Specifications
When there are no more than three GSM carriers, LTE bandwidth can be 1.4, 3, 5, 10, or 15 MHz in
the 900 MHz frequency band or be 5, 10, or 15 MHz in the 1800 MHz frequency band.
Two MRFU V2 modules are required to enable MIMO on the LTE side.
Figure 1.6 Typical output power of MRFU V2 (900 MHz/1800 MHz, GL MSR)
Number of
GSM
Carriers
Number of
LTE Carriers
Output Power
per GSM Carrier
(W)
Output Power
per LTE Carrier
(W)
40
30
30
40
27
20
20
30
20
20
12
20
10
20
Issue 03 (2013-12-30)
10
MRFU Description
2 Technical Specifications
The typical power consumption and the maximum power consumption are measured when the base
station works at a temperature of 25C.
The typical power consumption for GSM is reached when the base station works with 30% load and
power control and DTX are enabled. The maximum power consumption for GSM is reached when
the base station works with 100% load.
The typical power consumption for UMTS is reached when the base station works with 40% load.
The maximum power consumption for UMTS is reached when the base station works with 100%
load.
The power consumption for GSM is calculated based on the sharing power.
The typical power consumption for LTE is reached when the base station works with 50% load. The
maximum power consumption for LTE is reached when the base station works with 100% load.
The LTE power consumption is calculated based on 2 x 2 MIMO configuration. Two MRFUs are
configured in each sector.
Configuration
Output
Power per
Carrier (W)
Typical
Power
Consumptio
n (W)
Maximum
Power
Consumptio
n (W)
GSM
S2/2/2
20
700
900
S4/4/4
27
950
1350
S6/6/6
16
840
1180
3x1
20
540
670
3x2
20
800
1020
3x3
20
1040
1330
3x4
20
1150
1450
GSM S2/2/2+UMTS
3x1
GSM: 20
1150
1440
GSM S4/4/4+UMTS
3x1
GSM: 15
970
1260
GSM S4/4/4+UMTS
3x2
GSM: 10
930
1190
UMTS
GSM+
UMTS
Issue 03 (2013-12-30)
UMTS: 40
UMTS: 10
UMTS: 10
11
MRFU Description
2 Technical Specifications
Figure 1.2 Power consumption of the BTS3900 (Ver.B) (-48 V) (configured with MRFU V2, 900
MHz)
Mod
e
Configuration
Output
Power per
Carrier (W)
Typical
Power
Consumptio
n (W)
Maximum
Power
Consumptio
n (W)
GSM
S2/2/2
20
620
730
S4/4/4
20
810
1130
S6/6/6
12
710
1025
3x1
20
595
650
3x2
20
630
800
3 x 10 MHz
2 x 60
1185
1270
UMTS
LTE
Figure 1.3 Power consumption of the BTS3900 (Ver.B) (-48 V) (configured with MRFU V2,
1800 MHz)
Mod
e
Configuration
Output
Power per
Carrier (W)
Typical
Power
Consumptio
n (W)
Maximum
Power
Consumptio
n (W)
GSM
S2/2/2
20
640
750
S4/4/4
20
820
1140
S6/6/6
12
685
1100
3 x 10 MHz
2 x 60
1230
1355
LTE
Configuration
Output
Power per
Carrier (W)
Typical
Power
Consumptio
n (W)
Maximum
Power
Consumptio
n (W)
GSM
S2/2/2
20
800
1040
S4/4/4
27
1070
1540
S6/6/6
16
950
1340
3x1
20
660
840
UMTS
Issue 03 (2013-12-30)
12
MRFU Description
2 Technical Specifications
GSM+
UMTS
3x2
20
950
1220
3x3
20
1210
1560
3x4
20
1340
1700
GSM S2/2/2+UMTS
3x1
GSM: 20
1340
1690
GSM S4/4/4+UMTS
3x1
GSM: 15
1140
1490
GSM S4/4/4+UMTS
3x2
GSM: 10
1100
1410
UMTS: 40
UMTS: 10
UMTS: 10
Figure 1.2 Power consumption of the BTS3900A (Ver.B) (AC) (configured with MRFU V2, 900
MHz)
Mod
e
Configuration
Output
Power per
Carrier (W)
Typical
Power
Consumptio
n (W)
Maximum
Power
Consumptio
n (W)
GSM
S2/2/2
20
620
730
S4/4/4
20
810
1130
S6/6/6
12
710
1025
3x1
20
595
650
3x2
20
630
800
3 x 10 MHz
2 x 60
1185
1270
UMTS
LTE
Figure 1.3 Power consumption of the BTS3900A(Ver.B) (AC) (configured with MRFU V2, 1800
MHz)
Mod
e
Configuration
Output
Power per
Carrier (W)
Typical
Power
Consumptio
n (W)
Maximum
Power
Consumptio
n (W)
GSM
S2/2/2
20
640
750
S4/4/4
20
820
1140
S6/6/6
12
685
1100
3 x 10 MHz
2 x 60
1230
1355
LTE
Issue 03 (2013-12-30)
13
MRFU Description
2 Technical Specifications
Configuration
Output
Power per
Carrier (W)
Typical
Power
Consumptio
n (W)
Maximum
Power
Consumptio
n (W)
GSM
S2/2/2
20
745
960
S4/4/4
27
995
1410
S6/6/6
16
885
1240
3x1
20
585
730
3x2
20
845
1080
3x3
20
1085
1390
3x4
20
1195
1510
GSM S2/2/2+UMTS
3x1
GSM: 20
1195
1500
GSM S4/4/4+UMTS
3x1
GSM: 15
1015
1320
GSM S4/4/4+UMTS
3x2
GSM: 10
975
1250
UMTS
GSM+
UMTS
UMTS: 40
UMTS: 10
UMTS: 10
Figure 1.2 Power consumption of the BTS3900L (Ver.B) (-48V) (configured with MRFU V2, 900
MHz)
Mod
e
Configuration
Output
Power per
Carrier (W)
Typical
Power
Consumptio
n (W)
Maximum
Power
Consumptio
n (W)
GSM
S2/2/2
20
645
755
S4/4/4
20
835
1155
S6/6/6
12
735
1050
3x1
20
620
675
3x2
20
655
825
3 x 10 MHz
2 x 60
1210
1295
UMTS
LTE
Issue 03 (2013-12-30)
14
MRFU Description
2 Technical Specifications
Figure 1.3 Power consumption of the BTS3900L (Ver.B) (-48V) (configured with MRFU V2,
1800 MHz)
Mod
e
Configuration
Output
Power per
Carrier (W)
Typical
Power
Consumptio
n (W)
Maximum
Power
Consumptio
n (W)
GSM
S2/2/2
20
645
755
S4/4/4
20
835
1155
S6/6/6
12
735
1050
3 x 10 MHz
2 x 60
1210
1295
LTE
Configuration
Output
Power per
Carrier (W)
Typical
Power
Consumptio
n (W)
Maximum
Power
Consumptio
n (W)
GSM
20
1820
2495
GSM+
UMTS
GSM S4/4/4
(MRFU V2, 900
MHz)+GSM S4/4/4
(MRFU V2, 1800
MHz)+UMTS 3 x 2
(WRFU, 2100 MHz)
GSM: 20
2300
3125
UMTS: 20
Specifications
Dimensions (H x W x D)
Weight
12 kg
Issue 03 (2013-12-30)
15
MRFU Description
2 Technical Specifications
Specifications
1.25 Gbit/s
Topology
Dual-star
Specifications
Topology
Dual-star
Issue 03 (2013-12-30)
16
MRFU Description
2 Technical Specifications
Abbreviation
Full Name
3GPP
BBU
Baseband Unit
BER
CPRI
DTX
Discontinuous Transmission
GSM
GTMU
LBBP
LTE
MIMO
MRFU
MSR
Multi-Standard Radio
RAN
SDR
UBRI
Issue 03 (2013-12-30)
17