Professional Documents
Culture Documents
Update
11.12
Dimming
less is more
3F Filippi
Online
3F Filippi
on Facebook
Case history
3F Filippi
on Linked in
Dimming
page 4
page 8
Case history
page 36
less is more
Dimming
less is more
28,100,000
Graph of dimming progress over a 24 hour period, based on the amount of natural light and the presence of staff at the
workplace (source: Osram)
The ability to automatically recognize the lamps, with the possibility of creating versatile lighting luminaires capable of
functioning with lamps of various types, lengths and power ratings.
The ability to adjust the light output from 1% to 100% for fluorescent lamps (from 3% to 100% for compact
fluorescent lamps) - with the exception of wiring devices with special lamps that do not allow for significant dimming.
Digitally regulated pre-heating and activation within 0.6s (within 2s for compact fluorescent lamps)
Available in the 1-10V analogue control and digital DALI and DSI versions (Tridonic systems only)
The two worlds of Light Dimming: 1-10V ANALOGUE and DALI DIGITAL
The two most widely diffused systems in the 3F Filippi product range are currently the 1-10 Volt analog system and the
DALI digital system.
The main Supplied of both systems are listed below:
Compact decorative
3F Rocket Led
page 10
Lucequadro IP54
page 13
3F Cilindro Led
page 11
Barraluce P Opale
page 14
Barraluce P Ottica 2MG
page 16
Mira Parete DE
page 20
3F Travetta Sensor
page 22
Recessed
Barraluce L Opale
page 24
Barraluce L Ottica 2MG
page 26
Systems
3F Pro Led
page 28
3F Cub Led
page 30
3F Linda Opale
page 34
3F Linda UGR
page 35
3F Linda HS
page 32
3F Rocket Led
Adjustable track-mounted spotlights
Characteristics
design
650C IP20
Lighting Characteristics
Light output of the luminaire 1580
lm (20W) and 2,340 lm (36W).
Direct symmetric light distribution.
Mechanical Characteristics
Cylindrical housing in painted
aluminium (RAL 9006 Grey).
Polished, anodized, parabolic
optical element made from semispecular, anti-glare, and antiiridescent aluminium.
Circular anti-glare LED diffuser
lens for maximum visual comfort,
made from transparent prismatic
PMMA.
Oversized passive heatsink in
anodized aluminium, oversized,
for optimal LED module heat
management.
Upper bracket designed for
use with a track adapter (not
included), which allows the
luminaire to be oriented at angles
ranging from 0 to 30.
Electrical Characteristics
EEI A2 electronic wiring,
230V-50/60Hz, power factor >
0.95. Compliant with the IEC
60598-1 CEI EN 60598-1
standards.
Dimensions
Supplied
Compact LED module /930,
colour temperature 3000 K,
colour rendering Ra>90.
Colour tolerance: 3 MacAdam
ellipses.
Declared life L70: 50,000h.
Photobiological safety compliant
with risk exemption group RG1 of
the EN 62471 standard.
Track adaptor not included.
225
258
150
Applications
Accent lighting in commercial
environments, shops and
museums
10
Item
Code Euros
3F Rocket LED
Electronic EEI A2
3F Cilindro GR 25W/930 LED 41031
3F Cilindro GR 39W/930 LED 41044
3F Cilindro Led
Suspension
Characteristics
design
650C IP20
Lighting Characteristics
Light output of the luminaire 1500
lm (20W) and 2,250 lm (36W).
Direct symmetric light distribution.
Mechanical Characteristics
Cylindrical housing in painted
aluminium (RAL 9006 Grey).
Polished, anodized, parabolic
optical element made from semispecular, anti-glare, and antiiridescent aluminium.
Circular anti-glare LED diffuser
lens for maximum visual comfort,
made from transparent prismatic
PMMA.
Oversized passive heatsink in
anodized aluminium for optimal
LED module heat management.
Electrical Characteristics
EEI A2 electronic wiring,
230V-50/60Hz, power factor >
0.95. Compliant with the IEC
60598-1 CEI EN 60598-1
standards.
Dimensions
Supplied
Compact LED module /840,
colour temperature 4000 K,
colour rendering Ra>80.
Colour tolerance: 3 MacAdam
ellipses.
Declared life L70: 50,000h.
Photobiological safety compliant
with risk exemption group RG0 of
the EN 62471 standard.
Applications
Transit areas, accent lighting in
commercial environments,
exhibition areas, shops, shop
windows, dining areas, etc.
225
150
Item
Code Euros
3F Cilindro LED
Electronic EEI A2
3F Cilindro GR 20W/840 LED 37502
3F Cilindro GR 36W/840 LED 37507
Accessories Item
Code Euros
11
675C
IP64
Lighting Characteristics
The luminaires are equipped with
opal diffusers for maximum visual
comfort.
Diffused light distribution.
Mechanical Characteristics
Housing in V2 self-extinguishing,
UV stabilized, injection-moulded,
polycarbonate with a satin finish.
Long-lasting, ecological, injected
sealing. Injection-moulded opal
diffuser in methacrylate.
Gear-tray reflector in hotgalvanized steel, painted in
polyester-based white paint,
secured to the housing by steel
rapid connection devices, and
complete with a hinged opening.
Snug fit snap-lock clips in
transparent polycarbonate for
diffuser mounting, complete with
tamper-proof opening.
Adjustable suspension with white
polycarbonate ceiling rose and
2-metre stainless steel cables.
Electrical Characteristics
EEI A2 electronic wiring,
230V-50/60Hz, power factor >
0.95, with lamp warm start
feature.
Twin circuit.
Power cable entry via the upper
sealing grommet, or else laterally
via drilling.
5x1.5mm2 white power cable.
Supplied
Round fluorescent lamps, colour
rendering Ra>80, colour
temperature 4000 K
Dimensions
Applications
Transit areas, halls and any
environment in which indirect and
direct ceiling lighting improves
visual comfort. Virtually any
environment in which aggressive
agents that could compromise
the use of plastic materials are
not present. Entirely insect and
dust proof.
fino a 1800
134
620
Item
3F Petra Opale 620 Suspension
Code Euros
ROUND lamps supplied
Electronic EEI A2
3F Petra OP 620 1x40+1x60 T5-R LD HF DA SO 34345
12
Lucequadro IP54
Downlight
Characteristics
design
6.5J
VS
Lighting Characteristics
The luminaires make use of
compact lamps, and are
equipped with:
reflector - glass RVS
reflector - methacrylate RSP.
Mechanical Characteristics
Housing in white painted steel.
Reflector in highly-reflective white
painted aluminium.
4 mm thick, hardened, noncombustible VS moulded glass,
secured to the external white
aluminium frame, complete with
sealing gasket and hinged
opening.
Internally prismatic, anti-glare,
transparent SP methacrylate
diffuser, secured to the external
white aluminium frame, complete
with sealing gasket and hinged
opening.
IP54 overall protection rating.
Electrical Characteristics
EEI A2 electronic wiring,
230V-50/60Hz, power factor
>0.95, with lamp warm start
feature.
Compliant with the IEC 60598-1
and CEI EN 60598-1 standards.
Dimensions
Supplied
Compact fluorescent lamps,
triphosphorous / 840, ecological,
with colour rendering Ra> 80 and
colour temperature 4000 K.
Applications
Item
Code Euros
Lucequadro IP54 Reflector and moulded glass/methacrylate
Electronic EEI A2
Lucequadro 2x26 CD LD HF BL RVS IP54
Lucequadro 2x26 CD LD HF BL RVS IP54
- lamps supplied
36183
36187
13
Barraluce P OP
Characteristics
design
650C IP44
Lighting Characteristics
The luminaires are designed for
use with T5 lamps and are
equipped with opal diffusers for
direct wide symmetric distribution.
Luminaires designed to create
continuous lighting channels,
thanks to the overlapping of the
lamps.
Mechanical Characteristics
Housing in extruded anodized
aluminium.
Removable wiring support
element, with reflector function,
made from highly-reflective white
painted steel.
Flat OP diffuser in PMMA opal
methacrylate.
Electrical Characteristics
EEI A2 Multiwatt electronic wiring,
230V-50/60Hz, power factor
>0.95, with lamp warm start
feature.
OP
OP
Dimensions
Single luminaires
Luminaire section
28-54w = 1192.5 mm
Applications
99
99
1 x IFC
28-54w = 1192.5 mm
100
35-49-80w = 1492.5 mm
1+1 x IFC
100
99
35-49-80w = 1492.5 mm
99
1+1 x IC
28-54w
28-54w == 1122
1122 mm
mm
35-49-80w == 1422
35-49-80w
1422 mm
mm
1+1
1+1 xx IFC
IFC
28-54w
28-54w == 2191
2191 mm
mm
35-49-80w
35-49-80w == 2791
2791 mm
mm
2MG
2791 mm
2791 mm
2MG
28-54w
28-54w == 2138
2138 mm
mm
35-49-80w
35-49-80w == 2738
2738 mm
mm
1 x IFC
28-54w = 1184 mm
14
100
28-54w = 1184 mm
35-49-80w = 1484 mm
1+1 x IFC
105
99
100
105
Barraluce P OP - Single
Barraluce P OP - Channel
Start/End - Intermediate
Code Euros
Barraluce P OP Single
- lamps not included
EEI A2 Multiwatt Electronics
Barraluce P 1x28-54 T5 HF OP
170215
Barraluce P 1x35-49-80 T5 HF OP
170221
Item
Code Euros
no. pieces
Item Code
01
01
01
01
01
02
04
04
172026
172514
172012
02484
01434
01423
01429
0485/0512
2791 mm
2738 mm
1422 mm
15
Barraluce P 2MG
Characteristics
design
OP
Lighting Characteristics
The luminaires are designed for
use with T5 lamps and are
equipped with high-yield 2MG
optics, with a luminance of
<1000 cd/m2, for radial angles
>65 with direct symmetric
distribution.
960C IP20
OP
28-54w = 1192.5 mm
100
Mechanical Characteristics
Housing in extruded anodized
aluminium.
Removable wiring support
element in white painted steel.
High-yield parabolic 2MG optical
element in specular aluminium
with titanium and magnesium
surface treatment, non-iridescent,
with transverse blades closed at
the top.
Protective film against dust and
fingerprints, applied to the optical
element.
100
100
99
99
Electrical Characteristics
EEI A2 Multiwatt electronic wiring,
230V-50/60Hz, power factor
>0.95, with lamp warm start
feature.
Single luminaires: power cable
entry on top near one of the
ends.
35-49-80w = 1492.5 mm
1 x IFC
99
28-54w = 1192.5 mm
1+1 x IFC
100
35-49-80w = 1492.5 mm
99
1 x IFC
1 x IFC
1+1 x IC
28-54w = 1122 mm
28-54w = 1122 mm
35-49-80w = 1422 mm
35-49-80w = 1422 mm
2MG
1+1 x IFC
1+1 x IFC
28-54w = 2191 mm
28-54w = 2191 mm
35-49-80w = 2791 mm
35-49-80w = 2791 mm
2791 mm
2791 mm
2MG
Dimensions
1+1 x IC
1+1 xSingle
IC
Luminaire section
luminaires
28-54w = 2138 mm
28-54w = 2138 mm
= 2738 mm
28-54w = 1184 35-49-80w
mm
35-49-80w
= 2738 mm
1 x IFC
28-54w = 1184 mm
Applications
100
35-49-80w = 1484 mm
35-49-80w = 1484 mm
105
1+1 x IFC
105
99
99
1+1 x IC
28-54w = 1175 mm
28-54w = 1175 mm
35-49-80w = 1475 mm
35-49-80w = 1475 mm
Lun
Lun
1+1 x IFC
1+1 x IFC
28-54w = 2346 mm
28-54w = 2346 mm
35-49-80w = 2946 mm
35-49-80w = 2946 mm
LED
LED
100
2946 mm
2946 mm
1+1 x IC
1+1 x IC
28-54w = 2342 mm
28-54w = 2342 mm
35-49-80w = 2942 mm
35-49-80w = 2942 mm
100
105
1 x IFC
100
100
99
99
26w = 1191 mm
99
16
99
100
26w = 1191 mm
100
32w = 1491 mm
99
99
105
1+1 x IFC
105
2791 mm
2738 mm
1422 mm
Code Euros
Item
Code Euros
Item
Code
01
01
01
01
01
02
04
04
173444
172590
173430
02484
01434
01423
01429
0485/0512
2946 mm
2942 mm
1475 mm
17
650C
VS
OP
960C 960C
Lighting Characteristics
Version without glass - Light
output of the luminaire 1,580 lm
(20W) and 2,370 lm (36W).
Average luminance <1000cd/m2
for radial angles >65.
OP Version - Light output of the
luminaire 980 lm. (20W) and
1,470 lm (36W).
Version without glass - Light
output of the luminaire 1,610 lm
(20W) and 2,420 lm (36W).
Direct symmetric distribution.
Mechanical Characteristics
Housing and fastening brackets in
galvanized steel.
Passive heat sink in anodized
aluminium, oversized, for optimal
LED module heat management.
Polished, anodized, parabolic
optical element made from semispecular, anti-reflection, and noniridescent aluminium.
Version without glass - Circular
anti-glare LED diffuser lens for
maximum visual comfort, made
from transparent prismatic
PMMA.
OP Version - Enamelled opal
glass, hardened, 4 mm thick,
installed level with the ring.
VS Version - Micro-prismatic
moulded anti-glare glass,
hardened, 4 mm thick, installed
level with the ring.
VS and OP versions insect proof.
Electrical Characteristics
Wiring unit separate.
EEI A2 electronic wiring,
230V-50/60Hz, power factor >
0.95. Compliant with the IEC
60598-1 CEI EN 60598-1
standards.
18
Dimensions
151
103
7
221
Supplied
Compact /840 LED module, colour temperature 4000 K, colour
rendering Ra>80.
Colour tolerance: 3 MacAdam
ellipses.
Declared life L70: 50,000h.
Photobiological safety compliant
with risk exemption group RG0
of the EN 62471 standard.
Applications
In false ceilings with small gaps.
Transit areas, corridors,
commercial and exhibition areas,
shops and display cases.
Architectural environments.
221
Galassia 220
Galassia 220 VS
Galassia 220 OP
<1000 cd/m 65
2
650C IP20
960C
IP20
IP44
960C
IP20
IP44
Opal OP glass
Visual part IP44, recessed part
IP20.
Item
Code Euros
Accessories
Item
Code
Euros
19
Mira Parete
Characteristics
design
850C IP40
Lighting Characteristics
These luminaires, designed for
compact T5 and T8 lamps, are
equipped with asymmetric
reflectors in specular aluminium
with titanium and magnesium
surface treatments in order to
optimize high levels of direct or
indirect light distribution.
Mechanical Characteristics
White painted steel housing, with
micro perforations in the Mira Par
version, or slotted mesh in the
Mira Par DE version.
Upper diffuser in transparent, V2
self-extinguishing, UV-stabilized
polycarbonate.
Diffusing film in opal
polycarbonate in the lower zone,
on both versions.
Electrical Characteristics
EEI A2 Electronic wiring
230V-50/60Hz, power factor
>0.95, lamp warm start feature.
For the Mira Parete DE version:
Multiwatt EEIA2 electronic wiring,
230V-50/60Hz, power factor >
0.95 and lamp warm start feature.
Compliant with the
IEC 60598-1
and CEI EN 60598-1 standards.
Supplied
Compact 55W fluorescent lamps,
triphosphorous /840, ecological,
with a colour rendering of Ra >80
and colour temperature of 4000
K.
Applications
Lighting luminaire for wallmounting applications, with a
modern minimalist design, for
environments requiring
comfortable lighting.
Suitable for offices, meeting
rooms and management offices.
Dimensions
80
230
55W = 490
36W = 1100
58W = 1200
Versioni T8 e compatte
55W = 678
36W = 1287
58W = 1587
On request
Fuse accessory.
Emergency wiring, dimmable
electronic wiring.
14-24W = 490
28-54W = 1000
35-49-80W = 1200
14-24W = 678
28-54W = 1236
35-49-80W = 1536
20
Versioni T5
Mira Parete
Mira Parete DE
Item
Code Euros
Item
Mira Parete specular reflector in slotted mesh
EEI A2 Multiwatt Electronics
Mira Par DE 2X14-24 T5 HF
Mira Par DE 2X28-54 T5 HF
Mira Par DE 2X35-49-80 T5 HF
Code Euros
1597
1594
1598
21
3F Travetta
Sensor LS
F
960C IP20
Characteristics
design
Lighting Characteristics
High yield parabolic 2MG optics
with luminance values of < 1000
cd/m2 for radial angles >65.
These units provide for ample
direct distribution with 2MG
optics in order to optimize the
uniformity of the lighting in
environments with large distances
between the luminaires'
installation points.
Symmetric distribution,
asymmetric can be achieved with
the single-lamp versions by
dislocating the lamps.
Mechanical Characteristics
Square-shaped housing in white
painted steel, with anti-reflection
surfaces.
2MG versions with parabolic
optical element and transverse
blades closed at the top.
Adhesive protective film against
dust and fingerprints, applied to
the optical element.
Electrical Characteristics
DALI Multiwatt EEI A1 electronic
wiring, 230V-50/60Hz, power
factor > 0.95 and lamp warm
start feature.
5-pin 2x2.5 mm2 terminal
connection block.
Complete with occupancy and
light sensor.
Dimensions
60
190
Applications
On request
Fuse accessory.
Twin circuit wiring, emergency,
inhibition, housing and
accessories in RAL 9006.
Flat transparent prismatic diffuser
22
40
28 / 54 = 1290
35 / 49 / 80 = 1590
3F Travetta Multiwatt
2MG AMPIA Sensor LS
3F Travetta DI Multiwatt
2MG AMPIA Sensor LS
Item
Code Euros
3F Travetta Multiwatt 2MG AMPIA White housing, ample
specular optical element
high performanceDALI wiring
- lamps not included
DALI EEI A1 Electronics
3F Travetta 1x28-54 T5 HF DALI 2MG
AMPIA Sensor LS
168099
3F Travetta 1x35-49-80 T5 HF DALI 2MG
AMPIA Sensor LS
168100
3F Travetta 2x28-54 T5 HF DALI 2MG
AMPIA Sensor LS
168102
3F Travetta 2x35-49-80 T5 HF DALI 2MG
AMPIA Sensor LS
168103
Item
Code Euros
3F Travetta DI Multiwatt 2MG AMPIA White housing, ample
specular optical element
high performance
DALI wiring
- lamps not included
DALI EEI A1 Electronics
3F Travetta DI 1x28-54 T5 HF DALI 2MG
AMPIA Sensor LS
168228
3F Travetta DI 1x35-49-80 T5 HF DALI 2MG
AMPIA Sensor LS
168229
3F Travetta DI 2x28-54 T5 HF DALI 2MG
AMPIA Sensor LS
168231
3F Travetta DI 2x35-49-80 T5 HF DALI 2MG
AMPIA Sensor LS
168232
23
Barraluce L Opale
Characteristics
design
650C IP40
Lighting Characteristics
The luminaires are designed for
use with T5 lamps and are
equipped with opal diffusers for
direct diffused symmetric
distribution.
Luminaires designed to create
continuous lighting channels,
thanks to the overlapping of the
lamps.
Mechanical Characteristics
Housing in extruded anodized
aluminium.
Wiring support element
removable with function of
reflector in highly-reflective white
painted steel.
Flat OP diffuser in PMMA opal
methacrylate.
Electrical Characteristics
EEI A2 Multiwatt electronic wiring,
230V-50/60Hz, power factor
>0.95, with lamp warm start
feature.
Single luminaires: power cable
entry on top near one of the
ends.
Dimensions
Channel luminaires: quick-fit 3-pin
plug positioned on the support
element.
5-pin 2.5 mm cross-section
through line with irreversible quick
coupling plug/socket, with
branching via an irreversible 3-pin
quick coupling outlet, for
connection to the plug on the
wiring support element.
Compliant with the
IEC 60598-1 / CEI EN 60598-1
standards.
Lamps not included.
Applications
Environments that require diffused
comfortable lighting, such as
banks, shops and agencies.
Architectural environments.
24
Barraluce P OP - Single
Item
Barraluce L OP - Channel
Start/End - Intermediate
Code Euros
Barraluce P OP Single
- lamps not included
EEI A2 Multiwatt Electronics
Barraluce L 1x28-54 T5 HF OP
260171
Barraluce L 1x35-49-80 T5 HF OP
260182
Barraluce L 2x28-54 T5 HF OP
260565
Barraluce L 2x35-49-80 T5 HF OP
260572
Item
Code Euros
01
02
Item
Code
Barraluce L 1+1x35-49-80 T5 HF OP IFC 5P 265028
Barraluce L 1+1x35-49-80 T5 HF OP IC 5P 265886
Barraluce L 1x35-49-80 T5 HF OP IFC 5P 265014
5-pin plug/socket connection terminal block power line
02484
Pair of end elements for channels with diffusers
Linear coupling elements
01417
01423
25
960C IP20
Lighting Characteristics
The luminaires are designed for
use with T5 lamps and are
equipped with opal diffusers for
direct diffused symmetric
distribution.
Mechanical Characteristics
Housing in extruded anodized
aluminium.
Removable wiring support
element, with reflector function,
in highly-reflective white painted
steel.
Flat OP diffuser in PMMA opal
methacrylate.
Electrical Characteristics
EEI A2 Multiwatt electronic wiring,
230V-50/60Hz, power factor
>0.95, with lamp warm start
feature.
Single luminaires: power cable
entry on top near one of the
ends.
Channel luminaires: quick-fit 3-pin
plug positioned on the support
element.
5-pin 2.5 mm cross-section
through line with irreversible quick
coupling plug/socket, with
branching via an irreversible 3-pin
quick coupling outlet, for
connection to the plug on the
wiring support element.
Compliant with the
IEC 60598-1 / CEI EN 60598-1
standards.
Lamps not included.
Applications
Environments that require diffused
comfortable lighting, such as
banks, shops and agencies.
Architectural environments.
26
Dimensions
Item
Code Euros
Item
Code Euros
included
268004
268011
268018
268025
Item
Barraluce L 1+1x35-49-80 T5 HF 2MG 5P
Barraluce L 1x35-49-80 T5 HF 2MG 5P
5-pin plug/socket connection terminal block power line
Code
268025
268011
02484
01
02
01418
01423
1+1x35-49-80W = 2950
1+1x35-49-80W = 2950
1x35-49-80W = 1475
27
3F Pro Led
Adjustable track-mounted spotlights
Characteristics
design
650C IP20
Lighting Characteristics
Light output of the luminaire 1580
lm (25W) and 2,340 lm (39W).
Direct symmetric light distribution.
Mechanical Characteristics
Cylindrical housing in painted
aluminium (RAL 9006 Grey).
Polished, anodized, parabolic
optical element made from
semi-specular, anti-reflection, and
non-iridescent aluminium.
Circular anti-glare LED diffuser
lens for maximum visual comfort,
made from transparent prismatic
PMMA.
Oversized passive heatsink in
anodized aluminium, oversized,
for optimal LED module heat
management.
Upper bracket designed for
use with a track adapter (not
included), which allows the
luminaire to be oriented at angles
ranging from 0 to 30.
PHOTO TO BE
CHANGED
Electrical Characteristics
EEI A2 electronic wiring,
230V-50/60Hz, power factor >
0.95. Compliant with the IEC
60598-1 CEI EN 60598-1
standards.
Supplied
Compact LED module /930,
colour temperature 3000 K,
colour rendering Ra>90.
Colour tolerance: 3 MacAdam
ellipses.
Declared life L70: 50,000h.
Photobiological safety compliant
with risk exemption group RG1 of
the EN 62471 standard.
Track adaptor not included.
Dimensions
Applications
225
258
Item
3F Pro LED
Electronic EEI A2
3F Pro LED GR 25W/930
3F Pro LED GR 39W/930
28
Code Euros
41035
41040
850C IP65
6.5 J
Lighting Characteristics
Light output >100%.
Ample Distribution in the
longitudinal direction, reduced
distribution in the transverse
direction.
UGR <22 (EN 12464-1).
Mechanical Characteristics
V2 Self-extinguishing, injectionmoulded, polycarbonate housing,
grey (RAL 7035).
Long-lasting, ecological, injected
sealing.
V2 self-extinguishing, UVstabilized, transparent, injectionmoulded polycarbonate diffuser,
with external smooth surface,
internal
differentiated prismatic surface
and tamper-proof opening.
Gear-tray reflector in hotgalvanized steel, painted in
polyester-based white paint,
secured to the housing by steel
rapid connection devices, and
complete with a hinged opening.
Snug fit snap-lock clips in
stainless steel for diffuser
mounting.
Electrical Characteristics
Wiring with reliable brand name
electronic power supply,
230V 50-60Hz, constant output
power, class I.
IEC 60598-1 / CEI EN 60598-1.
Supplied
5W840 linear LED module, with
a colour temperature of 4000K
and a colour rendering index of
Ra>80.
Colour tolerance: 4 MacAdam
ellipses.
Declared life L70: 80,000h.
Photobiological safety compliant
with risk exemption group RG0 of
the EN 62471 standard.
Dimensions
The 3F Linda Compatta 5w is equipped with an adjustable rotary support upon which the LED strip
is fastened: this feature allows the direction of the light to be fully controlled, thus satisfying every
installation requirement, with the possibility of performing the relative adjustments directly on site.
Item
3F Linda Compatta LED
Electronic EEI A2
3F Linda Compatta 1x5W LED
Code Euros
5791
Applications
Thanks to the extremely wide flow
distribution, this luminaire is ideal
for lighting underpasses, corridors
and emergency exits. For wallmounted or ceiling-mounted
installation.
29
3F Cub Led
Characteristics
design
IP64 960C
Lighting Characteristics
Light output 100%.
Light output from the luminaire
11.700 lm (VT version) or 11.000
lm (VS version).
Ample direct symmetric
distribution.
UGR <23 (VT version)
UGR <22 (VS version)
(EN 12464-1).
Mechanical Characteristics
Double shell housing in moulded
aluminium, epoxy powder coated
in white, complete with a hinged
opening.
Snug fit snap-lock clips in
stainless steel.
Full reflector in specular aluminium
with titanium and magnesium
surface treatment, non-iridescent.
Non-combustible, hardened
transparent glass VT.
4 mm thick, non-combustible,
hardened, anti-glare, moulded
glass VS.
Long-lasting, ecological, injected
sealing.
Fastening bracket for surface or
suspension mounting in
galvanized steel.
Dimensions
Electrical Characteristics
Twin Circuit.
Philips Electronic wiring EEI=A2
230V-50/60Hz, power factor
>0.95, constant output current,
class I.
Total device consumption 120W
Compliant with the IEC 60598-1
CEI EN 60598-1 standards.
187
680x680
Supplied
Six 18W/840 Philips Linear LED
Modules, rated light output 2,200
lm cd, colour temperature 4000K,
colour rendering Ra>80.
LED module luminous efficacy:
122 lm/W. Declared life L70:
50,000h.
Photobiological safety compliant
with the risk exemption group
of the EN 62471 standard.
30
Applications
Commercial, display and industrial
environments, warehouses and
open areas.
Cold stores with temperatures as
low as -20C.
3F Cub Led VS
3F Cub Led VT
IP64
960C
Code Euros
twin circuit, moulded glass,
protection rating IP64
Electronic EEI A2
3F Cub 6x18W LED VS IP64
56276
Code Euros
twin circuit, transparent glass,
protection rating IP64
Electronic EEI A2
3F Cub 6x18W LED VT IP64
56263
31
3FLinda Inox HS
Airtight luminaire in
polycarbonate offering
improved protection
against aggressive
substances
IP65
6.5 J 850C
Characteristics
design
Lighting Characteristics
These luminaires, equipped with
with T5 fluorescent lamps, offer
wide symmetrical light distribution.
Electrical Characteristics
EEI A2 electronic wiring,
230V-50/60Hz, power factor
>0.95, with lamp warm start
feature.
Lines for column connection,
accessories on pp. 279
Supplied
Stainless steel mounting
brackets.
Linear T5 fluorescent lamps, with
colour rendering
Ra >80, colour temperature
4000K. Compliant with the EN
12464-1 European standard.
32
Dimensions
1x
49W=1150
100
100
110
2x
100
110
Mechanical Characteristics
V2 Self-extinguishing, injectionmoulded, polycarbonate housing
in grey (RAL 7035) with protective
treatment, for use in protected
environments.
Long-lasting, ecological, injected
sealing.
V2 self-extinguishing,
UV-stabilized, transparent,
injection moulded polycarbonate
diffuser, with external smooth
surface, internal differentiated
prismatic surface and protective
treatment, for use in protected
environments.
Gear-tray reflector in hotgalvanized steel, painted in
polyester-based white paint,
secured to the housing by steel
rapid connection devices, and
complete with a hinged opening.
Snug fit snap-lock clips in
stainless steel.
Tamper-proof, screwdriveraccessible diffuser opening.
Stainless steel mounting
brackets.
160
Applications
In terms of hygiene, this product
is perfectly suitable for installation
in food production facilities
(HACCP, IFS, BRC Standard).
Virtually any environment in which
aggressive agents that could
compromise the use of plastic
materials are not present. Not
suitable:
- in environments containing
chlorine gas, petroleum ether,
hydrocarbon mixtures,
evanescent mineral oil vapours
and/or lubricating emulsions for
machine tool cooling applications
- on surfaces that are subjected
to strong vibrations or exposed to
the elements, as well as on
ropes or poles.
49W=1570
3F Linda Inox HS
Code Euros
53934
53956
33
3FLinda OP
Characteristics
design
850C IP65
6.5 J
Lighting Characteristics
Light output >64%.
The luminaires for T5 lamps offer
direct/indirect wide symmetrical
light distribution
Mechanical Characteristics
Housing in V2 self-extinguishing,
UV stabilized, injection-moulded,
polycarbonate with a satin finish.
Long-lasting, ecological, injected
sealing.
Diffuser in V2 self-extinguishing,
UV stabilized, injection-moulded,
OP opal polycarbonate.
Reduced-width gear-tray reflector
for increased indirect light flux,
made from hot-galvanized steel,
painted in polyester-based white
paint and secured to the housing
by steel rapid connection
devices, complete with a hinged
opening.
Snug fit snap-lock clips in
transparent polycarbonate for
diffuser mounting, complete with
tamper-proof, screwdriveraccessible diffuser opening.
IP65 protection rating with the
use of a double membrane gland.
100
34
* 11W=100
100
110*
1150
1150
Code Euros
100
110
Item
160 100
* 11W=100
100
110*
100
p5.34
110*
1x
Applications
110*
110
Linda CR
100
110*
00
11W=300 / 14-18W=660
11W=300 / 14-18W=660
160
28-36W-54=1270 / 35-49-58-80W=1570
28-36W-54=1270 / 35-49-58-80W=1570
* 11C=100
Supplied* 11C=100
CR
100
100
110*
110*
100
p5.36
110*
.36
Electrical Characteristics
EEI A2 Electronic wiring,
230V-50/60Hz, power factor
>0.95, lamp warm start feature.
Dimensions
EEI A2 Multiwatt Electronic wiring, 1x..
CONC
1x
1x
1x.. LA, 2x
230V-50/60Hz, power
factor
>0.95, lamp warm start feature.
Central line intake on top of the
housing, or else at one end.
Compliant with the IEC 60598-1
and CEI EN 60598-1 standards.
160 100
100
160
11W=300 / 14-18W=660
11W=300 / 14-18W=660
28-36W=1270 / 49-58W=1570 28-36W=1270 / 49-58W=1570
3FLinda UGR
Characteristics
design
850C IP65
6.5 J
Lighting Characteristics
Luminaires designed for use with
T5 fluorescent lamps provide
symmetric light distribution and a
unified glare ration (UGR) of <19.
Mechanical Characteristics
Housing in V2 self-extinguishing,
injection-moulded, transparent
polycarbonate. Long-lasting,
ecological, injected sealing.
Gear-tray element in hotgalvanized steel, painted in
polyester-based white paint,
secured to the housing by steel
rapid connection devices, and
complete with a hinged opening.
Lamp diffusion reflector in
specular aluminium with titanium
and magnesium surface
treatment, non-iridescent, with
prismatic PMMA methacrylate
anti-glare filter.
V2 self-extinguishing,
UV-stabilized, transparent,
injection moulded polycarbonate
diffuser, with external smooth
surface and internal differentiated
prismatic surface, complete with
tamper-proof opening.
Snug fit snap-lock clips in
stainless steel for mounting the
diffuser, complete with tamperproof, screwdriver-accessible
diffuser opening.
Electrical Characteristics
EEI A2 electronic wiring,
230V-50/60Hz, power factor
>0.95, lamp warm start feature,
constant output voltage, class I.
IEC 60598-1 / CEI EN 60598-1.
Supplied
Stainless steel mounting
brackets.
T5 fluorescent lamps, with colour
rendering Ra>80 and colour
temperature 4000K.
Compliant with the European
standard EN 12464-1.
Dimensions
Applications
Parking garages or environments with low ceilings in which direct and indirect lighting provides visual
comfort and improves personal safety.
Virtually any environment in which aggressive agents that could compromise the use of plastic materials
are not present, (please request a polycarbonate compatibility chart); not suitable, for example, in
environments containing chlorine gas, petroleum ether, hydrocarbon mixtures, evanescent mineral oil
vapours and/or lubricating emulsions for machine tool cooling applications.
Not suitable on surfaces that are subjected to strong vibrations or exposed to the elements, as well as on
ropes or poles.
Item
Code Euros
3F Linda UGR T5 lamps supplied
Electronic EEI A2
3F Linda Trasparente 1x49 T5 LD HF LA UGR19 5384
3F Linda Trasparente 1x80 T5 LD HF LA UGR19 5386
3F Linda Trasparente 2x35 T5 LD HF UGR19
5391
35
Case history
In 1940 a factory was established in Modena for the production of the world's most magnificent sports
cars: it was the home of Maserati, one Italy's pioneering companies for automotive excellence. A place
where dreams come true.
In order to realize this dream, Maserati turned to a reliable partner in 3F Filippi, whose products were
used to illuminate the company's 40 thousand square metre production facility.
Maserati is well aware that attention to detail is of fundamental importance, and the company chose
3F Filippi for its reliability, the efficiency of its products and the authenticity that has always set it apart.
The main product employed within the scope of this project was the Beta i3F 762x58 HF Ampio, a steel
industrial unit from the "Waterproof and anti-corrosion" line, designed for use with fluorescent lamps.
Thanks to the use of a high-performance diffuser, the Beta i3F is capable of diffusing the light in an
broad manner in order to illuminate large areas with high levels of lighting.
Maximum efficiency and robustness, designs optimized to reduce dust accumulations, maximum
reliability, optimal mechanical strength and ease of installation and maintenance: these are the
watchwords that have convinced Maserati and other prestigious companies in the automotive industry
to choose Beta units for their product assembly lines.
36
Maserati was so satisfied with the results that it decided to reconfirm 3F Filippi as its lighting partner by
entrusting it with a new project: the lighting system for the new Maserta Automibili facility in Grugliasco,
the former home of Bertone and temple of automobile design, where the company's future models will
be produced.
This partnership is founded upon the long-term relationship that both companies have enjoyed for so
many years, as well as the guaranteed quality offered by 3F Filippi products, which are even capable
of satisfying the most demanding customers by ensuring maximum reliability in terms of the declared
performance and consumption.
For more information regarding the Beta series, please visit our website www.3F-Filippi.com
37
Follow us on Facebook!
Look for 3F Filippi S.p.A.
3F Filippi S.p.A.
No. 28 Via del Savena - 40065 - Pian di Macina - Pianoro (Bologna) - Italy
Tel. +39.051.6529611 - Fax +39.051.775884
www.3F-Filippi.com - e-mail: 3f-filippi@3f-filippi.it
Taxpayer I.D. 01033260371 - VAT code IT00529461204
Bologna Enterprise Registry 01033260371 - AER No.234613
Company Capital (fully paid) 3,000,000
DP.1112.I 3F Filippi S.p.A. is constantly striving to improve its products,
and therefore reserves the right to modify the contents of this
publication without notice.
Visit our website www.3F-Filippi.com or contact our technical
office to check for any available updates.
iesna.org
aidiluce.it
eu-greenlight.org