Professional Documents
Culture Documents
Improve
durability:
Reduce
permeability:
Increase
strength:
Priming
Versatile
.
Compressive strength
2
(N/mm ):
Tensile strength
2
(N/mm ):
Flexural strength
2
(N/mm ):
Drying shrinkage (%):
Adhesion to concrete
slant sheer bond
2
(N/mm ):
.
Dry
Wet
Dry
Wet
Dry
wet
.
.
Controls
28.0
22.5
3.0
2.0
7.0
6.0
0.07
2.62
Nitobond
SBR20
38.0
23.5
4.5
3.5
10.0
9.5
0.02
20.0
50 kgs
150 kgs
22 liters
Precautions
50 kgs
150 kgs
22.5 liters
Recommandations
Fire
Prepare surfaces thoroughly. Toe-in at edges wherever
Nitobond SBR20 is non-flammable.
Storage
All surfaces including edges must be primed.
Shelf life
All applications should be wet on wet; the primer must not be
allowed to dry.
Water may be added to the mix to make fine adjustments to
the workability for ease of placing
Cure mortars properly using Concure Curing Membrane* to
prevent rapid drying of the mortar.
o
3 months at 20 C. Nitobond SBR20 should be protected from
frost and direct sunlight.
Packaging
200 liters drums.
Coverage
Technical Service
The company provides a technical advisory service supported
by a team of specialists in the field.
Jeddah Showroom
Dammam
Yanbu
Medinah
Head Office & Factory
Important note: Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of
sale, copies of which may be obtained on request. Whist Fosroc endeavors to insure that any advice, recommendation, specification or information it may give
is accurate and correct, it cannot, because it has no direct or continuous control over where how its products are applied, accept any liability either directly or
indirectly arising from the use of its products, whether or not in accordance with any advice, specification, recommendation or information given by it
SAU/NBSBR20/01/00/A