Professional Documents
Culture Documents
============================================================================
A572 Grade 55
Specification:
Standard:
Classification:
Gangsteel is specialized in supplying ASTM steel plate in A572 Grade 55. For more information of A572 Grade
55steel plates, please check them in following:
Chemical composition % of the Product analysis of grade A572 Grade55 .
A572 Grade 55 Chemical Composition
The Element Max (%)
Grade
C
A572 Grade 55 0.25
Si
Mn
Ni
Co
0.05
A572 Grade 55
Thickness(mm)
Tensile(MPa)
Elongation(%)
8mm-50mm
380Mpa
485Mpa
20%
50mm-200mm
380Mpa
485Mpa
17%
Grade
A529
Grade 55
Al
Ni
Mo
Product
Shape
Plates
Thickness
in[mm]
ALL
To 3/4
[20]
C max%
0.26
0.25
0.04
0.05
0.4
0.2
0.04
0.05
0.4
0.2
Mn %
P max%
S max%
Si max%
Cu min%
Bars
over 4 To 3/4
[100]
[20]
0.26
0.27
0.29
0.26
0.27
0.800.850.85-1.20
0.60-0.90
1.20
1.20
0.04
0.04
0.04
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.15-0.4 0.15-0.4 0.15-0.4 0.4
0.4
0.2
0.2
0.2
0.2
0.2
0.28
0.600.90
0.04
0.05
0.4
0.2
0.29
0.600.90
0.04
0.05
0.4
0.2
Plate(PlatesShapesBars)
ASTM A36
58-80 [400-550]
36 [250]
20
23
Shapes
Elongation in 8 in. [200 mm], min, %
20
21
Equivalent grades of ASTM A36
Germany
DIN,WNr
France
AFNOR
England
BS
40 EE
Italy
UNI
China
GB
Europe
EN
S235 J2G3
FeE360 D2
Russia
GOST
Manufacturing
Portland Bolt manufactures custom bent anchor bolts from 1/2" - 4" diameter to virtually any ASTM specification.
They are provided either plain finish or hot-dip galvanized. Stainless steel anchor bolts are also manufactured. All
operations, including the galvanizing process, are performed in-house.
Stock
Portland Bolt manufactures and stocks anchor bolts, which are available for immediate shipment. Our inventory
includes a full line of anchor bolts in ASTM grades F1554 Grade 36, F1554 Grade 55, and A307 grade C.
Technically, A307 grade C was withdrawn in 2007and replaced by F1554 grade 36. However, Portland Bolt will
supply stock anchor bolts to this specification when requested by the customer. For more in-depth technical
information about the F1554 anchor bolt specification, visit www.F1554AnchorBolts.com.
Dimensions
Grades in Stock
ASTM F1554-36, F1554-55, ASTM A307-C
Plain Finish
Part #
Hot-Dip Galvanized
Part #
1/2 x 8 x 2 x 4
12357
12358
1/2 x 10 x 2 x 4
12029
12030
1/2 x 12 x 2 x 4
12618
12619
1/2 x 18 x 4 x 4
Made to Order
19579
5/8 x 8 x 2 x 4
17752
17753
5/8 x 10 x 2 x 4
17754
17755
5/8 x 12 x 3 x 4
17735
17689
5/8 x 18 x 4 x 6
Made to Order
17658
3/4 x 6 x 3 x 4
14122
14123
3/4 x 8 x 3 x 4
16599
16600
3/4 x 10 x 3 x 4
16601
16602
3/4 x 12 x 4 x 4
16603
16604
3/4 x 14 x 4 x 6
18918
18919
3/4 x 15 x 4 x 6
15980
15981
3/4 x 16 x 4 x 6
18920
18921
3/4 x 18 x 4 x 6
15982
15983
3/4 x 18 x 4 x 7
Made to Order
17979
3/4 x 24 x 4 x 6
16629
16630
Plain Finish
Part #
Hot-Dip Galvanized
Part #
3/4 x 30 x 4 x 6
Made to Order
15989
3/4 x 30 x 4 x 7
Made to Order
17981
3/4 x 36 x 4 x 6
Made to Order
19300
7/8 x 18 x 4 x 6
15984
15985
1 x 12 x 4 x 4
18930
19305
1 x 16 x 4 x 6
18931
19296
1 x 18 x 4 x 6
15986
15987
1 x 24 x 4 x 6
18933
19298
1 x 36 x 4 x 6
15978
15979
1 x 36 x 4 x 7
Made to Order
17729
1 x 36 x 4 x 12
Made to Order
15976
1-1/4 x 32 x 6 x 7
Made to Order
17063
1-1/4 x 36 x 5 x 12
Made to Order
19594
1-1/4 x 42 x 6 x 7
Made to Order
17064
Black - Indicates stock ASTM A307 grade C and F1554 grade 36 anchor bolts.
Red - Indicates stock ASTM F1554 grade 55 anchor bolts. Grade 55 anchor bolts meet supplementary requirement S1 for
weldability.
ASTM A307
Scope
The ASTM A307 specification covers carbon steel bolts and studs ranging from 1/4" through 4" diameter. This is your
everyday, run of the mill bolt specification often manufactured using A36 round bar. There are three grades A, B, and
C* which denote tensile strength, configuration, and application. Refer to the Mechanical Properties Chart for the
subtle strength differences within each grade.
Grades
A
Headed bolts, threaded rods and bent bolts intended for general applications.
Heavy hex bolts and studs intended for flanged joints in piping systems with cast iron flanges.
C* Nonheaded anchor bolts, either bent or straight, intended for structural anchorage purposes. The end of a grade C anchor
bolt intended to project from the concrete will be painted green for identification purposes. Permanent marking is a
supplemental requirement. *As of August 2007, grade C has been replaced by specification F1554 grade 36. We will
continue to supply grade C, if required by the project.
Mechanical Properties
Grade Tensile, ksi Yield, min, ksi Elong %, min
A
60 min
--
18
B
C*
60 - 100
--
18
58 - 80
36
23
Chemical Properties
Element
Grade A Grade B
Carbon, max
0.29%
0.29%
Manganese, max
1.20%
1.20%
Phosphorus, max
0.04%
0.04%
Sulfur, max
0.15%
0.05%
1-5/8 - 4
A307 Grade B
Washers
1/4 - 4
F844