You are on page 1of 6

Alloy

An alloy is a partial or complete solid solution of one or more elements


in a metallic matrix. Complete solid solution alloys give single solid
phase microstructure, while partial solutions give two or more phases
that may be homogeneous in distribution depending on thermal (heat
treatment) history. Alloys usually have different properties from those of
the component elements.
Alloying one metal with other metal(s) or non metal(s) often enhances
its properties. For instance, steel is stronger than iron, its primary
element. The physical properties, such as density, reactivity, Young's
modulus, and electrical and thermal conductivity, of an alloy may not
differ greatly from those of its elements, but engineering properties, such
as tensile strength
[1]
and shear strength may be substantially different
from those of the constituent materials. This is sometimes due to the
sizes of the atoms in the alloy, since larger atoms exert a compressive
force on neighboring atoms, and smaller atoms exert a tensile force on
their neighbors, helping the alloy resist deformation. Alloys may exhibit
marked differences in behavior even when small amounts of one
element occur. For example, impurities in semi-conducting
ferromagnetic alloys lead to different properties, as first predicted by
White, Hogan, Suhl, Tian Abrie and Nakamura.
[2][3]
Some alloys are
made by melting and mixing two or more metals. Brass is an alloy made
from copper and zinc. Bronze, used for bearings, statues, ornaments and
church bells, is an alloy of tin and copper.
Unlike pure metals, most alloys do not have a single melting point.
Instead, they have a melting range in which the material is a mixture of
solid and liquid phases. The temperature at which melting begins is
called the solidus and the temperature when melting is complete is called
the liquidus. However, for most alloys there is a particular proportion of
constituents which give them a single melting point or (rarely) two. This
is called the alloy's eutectic mixture.
List of alloys
From Wikipedia, the free encyclopedia
Jump to: navigation, search
This is an incomplete list of named alloys grouped alphabetically by base metal. Within these
headings they are in no particular order. Some of the main alloying elements are optionally listed
after the alloy names.
Contents
[hide]
1 Alloys of aluminium
2 Alloys of bismuth
3 Alloys of cobalt
4 Alloys of copper
5 Alloys of gallium
6 Alloys of gold
7 Alloys of indium
8 Alloys of iron
9 Alloys of lead
10 Alloys of magnesium
11 Alloys of mercury
12 Alloys of nickel
13 Alloys of potassium
14 Rare earth alloys
15 Alloys of silver
16 Alloys of titanium
17 Alloys of tin
18 Alloys of uranium
19 Alloys of zinc
20 Alloys of zirconium














Aluminium
Aluminium (ljmnim (helpinfo), / lj mnim/) or aluminum
(/lumnm/ (helpinfo), see spelling below) is a silvery white and ductile member of the boron
group of chemical elements. It has the symbol Al; its atomic number is 13. It is not soluble in
water under normal circumstances. Aluminium is the most abundant metal in the Earth's crust,
and the third most abundant element therein, after oxygen and silicon. It makes up about 8% by
weight of the Earths solid surface. Aluminium is too reactive chemically to occur in nature as
the free metal. Instead, it is found combined in over 270 different minerals.
[1]
The chief source of
aluminium is bauxite ore.
Aluminium is remarkable for its ability to resist corrosion (due to the phenomenon of
passivation) and its low density. Structural components made from aluminium and its alloys are
vital to the aerospace industry and very important in other areas of transportation and building.
Its reactive nature makes it useful as a catalyst or additive in chemical mixtures, including being
used in ammonium nitrate explosives to enhance blast power.
Bismuth
Bismuth (pronounced / bzm/) is a chemical element that has the symbol Bi and atomic
number 83. This heavy, brittle, white crystalline trivalent poor metal has a pink tinge and
chemically resembles arsenic and antimony. Of all the metals, it is the most naturally
diamagnetic, and only mercury has a lower thermal conductivity. It is generally considered to be
the last naturally occurring stable, non-radioactive element on the periodic table, although it is
actually slightly radioactive, with an extremely long half-life.
Bismuth compounds are used in cosmetics, medicines, and in medical procedures. As the toxicity
of lead has become more apparent in recent years, alloy uses for bismuth metal as a replacement
for lead have become an increasing part of bismuth's commercial importance.

Cobalt
Cobalt (pronounced /koblt/) is a hard, lustrous, grey metal, a chemical element with symbol Co. It is
found in various metallic-lustred ores such as cobaltite (CoAsS), safflorite (CoAs
2
) and skutterudite
(CoAs
3
), and their oxidation products such as pink erythrite ('cobalt glance': Co
3
(AsO
4
)
2
.8H
2
O) and
sphaerocobaltite (CoCO
3
). Cobalt is used in the preparation of magnetic, wear-resistant, and high-
strength alloys. Cobalt blue (cobalt(II) aluminate, CoAl
2
O
4
) gives a distinctive deep blue color to glass,
ceramics, inks, paints, and varnishes.

Copper
Copper (pronounced / k p/) is a chemical element with the symbol Cu (Latin: cuprum) and
atomic number 29. It is a ductile metal with excellent electrical conductivity. Copper is rather
supple in its pure state and has a pinkish luster which is (beside gold) unusual for metals, which
are normally silvery white. It is used as a heat conductor, an electrical conductor, as a building
material and as a constituent of various metal alloys.
Gallium
Gallium (pronounced /glim/) is a chemical element that has the symbol Ga and atomic number 31.
A soft silvery metallic poor metal, gallium is a brittle solid at low temperatures but liquefies slightly
above room temperature and will melt in the hand. It occurs in trace amounts in bauxite and zinc ores.
An important application is in the compounds gallium nitride and gallium arsenide, used as a
semiconductor, most notably in light-emitting diodes (LEDs).
Gold
Gold (pronounced /old/) is a chemical element with the symbol Au (from its Latin name
aurum) and atomic number 79. It is a highly sought-after precious metal which has been used as
money, a store of value and in jewelery, sculpture and ornamentation since the beginning of
recorded history. The metal occurs as nuggets or grains in rocks, underground "veins" and in
alluvial deposits. It is one of the coinage metals. Gold is dense, soft, shiny and the most
malleable and ductile substance known. Pure gold has a bright yellow color traditionally
considered attractive.
Gold formed the basis for the gold standard used before the collapse of the Bretton Woods
system. The ISO currency code of gold bullion is XAU.
Modern industrial uses include dentistry and electronics, where gold has traditionally found use
because of its good resistance to oxidative corrosion.
Chemically, gold is a transition metal and can form trivalent and univalent cations upon
solvation, but is attacked by chlorine, fluorine, aqua regia and cyanide. Gold dissolves in
mercury, forming amalgam alloys, but does not react with it. Gold is insoluble in nitric acid,
which will dissolve silver and base metals, and this is the basis of the gold refining technique
known as "inquartation and parting". Nitric acid has long been used to confirm the presence of
gold in items, and this is the origin of the colloquial term "acid test," referring to a gold standard
test for genuine value.

You might also like