The document describes two laser diode controllers, the OELDC-500DIP and OELDC-800DIP, produced by O/E Land Inc. The controllers provide stable temperature control and accurate constant current to drive laser diodes, semiconductor optical amplifiers, and LEDs. They offer adjustable current limits, temperature stabilization at 25°C, and single 5V power supply.
The document describes two laser diode controllers, the OELDC-500DIP and OELDC-800DIP, produced by O/E Land Inc. The controllers provide stable temperature control and accurate constant current to drive laser diodes, semiconductor optical amplifiers, and LEDs. They offer adjustable current limits, temperature stabilization at 25°C, and single 5V power supply.
The document describes two laser diode controllers, the OELDC-500DIP and OELDC-800DIP, produced by O/E Land Inc. The controllers provide stable temperature control and accurate constant current to drive laser diodes, semiconductor optical amplifiers, and LEDs. They offer adjustable current limits, temperature stabilization at 25°C, and single 5V power supply.
Description OELDC Laser Diode Controller combines ultra-stable temperature controller and accurate constant current driver. It is ideal to drive laser diode module (transmission laser diode, pump laser diode, etc.), semiconductor optical amplifier (SOA), super luminescent diode (SLD) and light emitting diode (LED). Two PI loops monitor and control both laser diode current and temperature. Single +5V power supply provides 20~500mA/50~800mA laser diode current and 1.2A/2.0A thermoelectric cooler (TEC) control current. With on-board DIP-14 connector, mounting the DIL- packaged module is easy and reliable. Adjustable current limitation and slow-start can protect the module.
Features o On-board DIP-14 Connector for DIL Packaged Module. o Up to 500mA (OELDC-500DIP) or 800mA (OELDC-800DIP) Laser Diode Current Drive Capacity. o 0.03% Driving Current Accuracy. o Adjustable Laser Current Limitation. o Slow Start Circuitry. o Laser Diode Enable Switch and LED Indicator. o High TEC Drive Capacity: 1.2A (OELDC-500DIP) or 2.0A (OELDC-800DIP). o 0.005 o C Temperature Stability. o Temperature Stabilization Point: +25 o C/10Kohms (Others on Request) o Temperature Control Always-On Function. o +5V Single Power Supply.
OELDC-500DIP Parameters Min. Typ. Max. Laser Diode Output Current 500mA (max), 20mA (min) Output Current Accuracy @500mA, 1min 0.01% 0.03% 0.05% Output Current Stability @250mA, 24hrs 0.1% or 0.3mA TEC Output Current 1.2A (max) Temperature Stability @25 o C, 1hr 0.002 o C 0.005 o C 0.01 o C Temperature Stability @25 o C, 24hrs 0.003 o C 0.008 o C 0.03 o C External temperature sensor 10K@25 o C Thermistor (others on request) Slow-Start Delay Time 1.8s 2.0s 2.5s Laser Diode Working Mode Continuous Constant Current Driving Power Supply +5V/2.5A Operation Temperature 0 to 35 o C Storage Temperature -20 to 70 o C Size 115mm50mm30mm (WLD)
O/E Land Inc. 4321, Garand, Montreal, Quebec, Canada (514)334-4588 www.o-eland.com
OELDC-500DIP/OELDC-800DIP Laser Diode Controller
Page 2 of 2
Electrical Connection PIN No. FUNCTION J1:1 Power Ground J1:2 Power Ground J1:3 Power Ground J1:4 Power +5V J1:5 Power +5V J1:6 Power +5V J1:7 Laser Enable Switch J1:8 Laser Enable Switch J1:9 Laser Working LED Anode (+) J1:10 Laser Working LED Cathode (-)
Top view of connectors layout OELDC-800DIP Parameters Min. Typ. Max. Laser Diode Output Current 800mA (max), 50mA (min) Output Current Accuracy @500mA 0.01% 0.03% 0.05% Output Current Stability @250mA, 24hrs 0.12% or 0.5mA TEC Output Current 2.0A (max) Temperature Stability @25 o C, 1hr 0.002 o C 0.005 o C 0.02 o C Temperature Stability @25 o C, 24hrs 0.005 o C 0.01 o C 0.05 o C External temperature sensor 10K@25 o C Thermistor (others on request) Slow-Start Delay Time 1.8s 2.0s 2.5s Laser Diode Working Mode Continuous Constant Current Driving Power Supply +5V/3.5A Operation Temperature 0 to 35 o C Storage Temperature -20 to 70 o C Size 115mm50mm40mm (WLD)
Note: Must check the laser diode module electrical pin description before installation. O/E Land Inc. 4321, Garand, Montreal, Quebec, Canada (514)334-4588 www.o-eland.com
OELDC-500DIP/OELDC-800DIP Laser Diode Controller
Page 3 of 3
Operation Steps 1. Connect DC power supply, a switch, and a LED to J1. Using the same power wires in parallel. 2. Move the Jumper from J2, connect a current-meter across two pins of J2. 3. Adjust potentiometer R7 (ADJUST) clockwise to minimize the laser driving current. 4. Install Laser Diode Module in J3. Mount the heat sink if necessary. 5. Turn on power supply, then turn on the Laser Diode Enable Switch. 6. Adjust potentiometer R7, measure the laser driving current by current-meter 7. Adjust current limitation potentiometer R6 (LIMIT) if necessary. Note: R6 has been adjusted to maximum or on customers request. 8. Turn off Laser Diode Enable Switch, then turn off power supply, 9. Insert the jumper to J2. Note: If the maximum laser diode driving current cannot be achieved, user can increase the power supply voltage. For example, from 5V to 6V. Heat Sink Requirement If laser diode driving current is larger than 200mA, a heat sink or a mini-fan is required to cool the laser diode module. The installation methods are shown as below.