Scheme for Teaching and Examination Master of Engineering (Electrical Power Systems) Academic Year 2013 14 & Academic Year 2014-15
1. DEPARTMENT MAY OFFER ANY OF MAJOR ELECTIVES Rev. 01 SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks SEMESTER I MECC-101 RESEARCH METHODOLOGY 2 0 0 2 2 3 70 30 20 0 120 MEEPS-102 MODERN CONTROL SYSTEMS 4 0 2 6 5 3 70 30 20 30 150 MEEPS-103 ECONOMICS OF POWER SYSTEMS 4 0 2 6 5 3 70 30 20 30 150 MEEPS-104 POWER SYSTEM MODELLING & SIMULATION 4 0 2 6 5 3 70 30 20 30 150 MEEPS-105A MAJOR ELECTIVE-I INTRODUCTION TO OPTIMIZATION TECHNIQUES 4 0 2 6 5 3 70 30 20 30 150 MEEPS-105B MAJOR ELECTIVE-I ADVANCED POWER SYSTEM PROTECTION 4 0 2 6 5 3 70 30 20 30 150 MEEPS-106 POWER QUALITY 3 0 0 3 3 3 70 30 20 0 120 TOTAL 21 0 08 29 25 18 420 180 120 120
840
Kadi Sarva Vishwa Vidyalas LDRP Institute of Technology and Research Scheme for Teaching and Examination Master of Engineering (Electrical Power Systems) Academic Year 2013 14 & Academic Year 2014-15
1. DEPARTMENT MAY OFFER ANY OF MAJOR ELECTIVES Rev. 01
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks SEMESTER II MEEPS-201 FLEXIBLE AC TRANSMISSION SYSTEMS 4 0 2 6 5 3 70 30 20 30 150 MEEPS-202 POWER SYSTEM DYNAMICS & CONTROL 4 0 2 6 5 3 70 30 20 30 150 MEEPS-203 ADVANCED POWER ELECTRONICS 4 0 2 6 5 3 70 30 20 30 150 MEEPS-204A MAJOR ELECTIVE II RESTRUCTURED POWER SYSTEM 4 0 2 6 5 3 70 30 20 30 150 MEEPS-204B MAJOR ELECTIVE II HARMONIC MEASUREMENT & FILTRATION TECHNIQUES 4 0 2 6 5 3 70 30 20 30 150 MEEPS-205 RECENT TRENDS IN NON- CONVENTIONAL ENERGY SYSTEMS 3 0 0 3 3 3 70 30 20 0 120 MEEPS-206 SEMINAR 0 0 4 4 2 0 0 0 40 60 100 TOTAL 19 0 12 31 25 15 350 150 140 180
820
Kadi Sarva Vishwa Vidyalas LDRP Institute of Technology and Research Scheme for Teaching and Examination Master of Engineering (Electrical Power Systems) Academic Year 2013 14 & Academic Year 2014-15
1. DEPARTMENT MAY OFFER ANY OF MAJOR ELECTIVES Rev. 01 SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks SEMESTER III MEEPS301 ARTIFICIAL INTELLIGENCE & CONTROL IN POWER SYSTEMS 4 0 2 6 5 3 70 30 20 30 150 MEEPS302-A MAJOR ELECTIVE-III MICROCONTROLLER BASED SYSTEM DESIGN 4 0 2 6 5 3 70 30 20 30 150 MEEPS302-B MAJOR ELECTIVE-III POWER SYSTEM PLANNING & RELIABILITY 4 0 2 6 5 3 70 30 20 30 150 MEEPS303 ENERGY MANAGEMENT & AUDIT 3 0 0 3 3 3 70 30 20 0 120 MEEPS304 DISSERTATION PHASE-I 0 0 17 17 17 0 0 50 0 150 200 TOTAL 11 0 21 32 30 09 210 140 60 210 620
Kadi Sarva Vishwa Vidyalas LDRP Institute of Technology and Research Scheme for Teaching and Examination Master of Engineering (Electrical Power Systems) Academic Year 2013 14 & Academic Year 2014-15
1. DEPARTMENT MAY OFFER ANY OF MAJOR ELECTIVES Rev. 01 SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PRACT.
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks SEMESTER - IV MEEPS401 THESIS PROGRESS REVIEW 0 0 15 15 15 0 0 50 0 150 200 MEEPS402 DISSERTATION PHASE II 0 0 15 15 15 0 0 50 0 150 200 TOTAL 0 0 30 30 30 0 0 100 0 300 400
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 1 Electrical Engineering (Electrical Power System) Subject Name: Modern Control Systems
A. Course Objectives: The educational objectives of this course are To understand the basic concepts of modern control theory in relation to the stability of a system. To co relate the concepts of control theory with the field of electrical engineering.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS102 Modern Control Systems 4 0 2 6 5 3 70 30 20 30 150
C. Syllabus
SR No. Unit No Topic No. of Hours Weightage In Exam. 1 Unit:1 Mathematical background: Matrices: Definition of Matrices; Matrix Algebra; Matrix Multiplication and Inversion;Rank of a Matrix; Differentiation and Integration of Matrices. 8 10% 2 Unit: 2
State Variable Analysis: Introduction, concepts of state, state variables and state model, state-space representation for linear continuous-time systems and discrete-time systems.Time, domain solution of state equations: Solution of homogeneous state equations, state transition matrix, evaluation of matrix exponential (e At ), solution of non- homogeneous state equations.
State space representation: State-space representation of high- order differential equations, state space representation of transfer function in controllable, observable and diagonal form, relationship between state equations and transfer function. Signal flow graph of state equations, decomponsition of transfer function, diagonalization, eigen values and eigen vectors, modal matrix. 20 30% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
4 Unit: 3 Controllability and Observalibitly: Concept of Controllability and Observability; Controllability and Observability tests for continuous time system; Controllability and Observability of discrete time system; Controllability and Observability of state model in Jordan canonical form; Loss of Controllability and Observability for sampling 10 15% 5 Unit: 4 Models of Digital control devices and systems Introduction to z-transform, ROC in z-transform, basic discrete time signals, time domain models of discrete time systems, transfer function models, stability on z-plane and jury stability criteria, z-domain description of sampled continous time plants, , z-domain description of systems with dead time, Implementation of digital controllers, Tunable PID controllers, Methods of tuning industrial PI, PID controllers 12 25% 6 Unit: 5 Nonlinear systems :Introduction, common physical nonlinearities-saturation,dead-zone,relay,relay with dead zone, hysteresis, backlash, etc, jump resonance, limit cycle.Phase-plane analysis-phase plane and phase trajectory, singular points, construction of phase trajectory, evaluation of time, stability analysis.
10 20%
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. Experiments shall be performed in the laboratory related to course contents.
E. Student Learning outcomes:
After completion of the course, students will be able to apply concepts of modern control theory in power system control.
F. Recommended Study Materials
Reference Books:
1. Digital control and state variable methods, M. Gopal, TATA McGraw Hill Company 2. Discrete time control systems, Katsushiko Ogata, Prentice Hall Publication,1995. 3. Modern Control Systems, M.Gopal, TATA McGraw Hill Company 4. Digital control systems, Benjamin C. Kuo, Oxford University Press, USA, 1995.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 1 Electrical Engineering (Electrical Power System) Subject Name: Economics of Power System A. Course Objective:
Recapture of basic concepts of economic load dispatch problem
Understanding the conventional optimization techniques used in economic load dispatch
Overviews of existing practices in electrical energy market and thereby, gauge the direction of future growth.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 103 Economics of Power System 4 0 2 6 5 3 70 30 20 30 150
C. Detailed Syllabus
SR No. Unit No Topics No. of Hours Weightage In Exam. 1 Unit:1 Introduction And Production Cost Models Introduction; Economic importance; Uses and types of production cost programs: Production costing using load duration curves, outages considered; Probabilistic production cost programs: Probabilistic production cost computations, simulating economic scheduling with the unserved load method, Expected cost method, Discussion on practical problems; Sample computation and exercise: Excluding forced outages, including forced outages.
08 10% 2 Unit: 2 Economic Dispatch Of Thermal Units And Methods Of Solution Economic dispatch problem; Thermal system dispatching with network losses considered; Lambda iteration method; Gradient methods of economic dispatch: Gradient search, economic dispatch by gradient search; Newtons method; Economic dispatch with piecewise linear cost functions; Economic dispatch using dynamic programming; Base point and participation factors. 12 20% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
3 Unit: 3 Hydrothermal Co-Ordination Introduction: Long range hydro-scheduling, short range hydro- scheduling; Hydroelectric Plaint Models; Scheduling Problems: Types of scheduling problems, Scheduling energy; Short term hydrothermal scheduling problems: Gradient approach; Dynamic programming solution to the hydrothermal scheduling problem: Extension to other cases, dynamic programming solution to multiple hydro plant problem; Hydro-scheduling using linear programming.
10 15% 4 Unit: 4 Unit Commitment Introduction: Constraints in unit commitment, spinning reserve, thermal unit constraints, other constraints; Unit commitment solution methods: Priority list methods, dynamic programming solution, Lagrane relaxation solution; Economic dispatch v/s Unit Commitment.
10 15% 5 Unit: 5 Fundamentals Of Economics And Deregulated Markets Introduction; Fundamentals of markets: Modeling the consumers and producers, market equilibrium and Pareto efficiency; Concepts from the theory of the firm: Long run and short run; Types of markets: Spot market, Forward contracts and forward markets, Future contracts and future markets; Markets with imperfect competition: Market power, models of imperfect markets, monopoly; Deregulation of electric utilities; Need for a managed spot market; Types of electricity markets: Bilateral markets and pool markets; Open electrical energy markets: Comparison of pool and bilateral trading; Managed spot market: Obtaining balancing resources, Gate closures, operation of the managed spot market; Independent system operator (ISO): Types of ISO, Role of ISO; Power system operation Old v/s New. 16 25% 6 Unit: 6 Availability Based Tariff: Introduction to Availability based tariff, daily scheduling process, deviation from schedule, trading opportunity, UI rate vs system marginal cost, ABT operation guidelines for SLDC, Optimum utilization of intra-state resources, Open Access, Wheeling and energy banking
04 15%
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc.. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation.
E. Students Learning Outcomes
The student can identify different areas of energy management and economic supply of energy
F. Recommended Study Materials
Text & Reference Books: TEXT BOOKS: 1. Allen J. Wood & Bruce F. Wollenberg Power Generation Operation And Control A Wiley- Interscience Publication. 2. Daniel Kirschen&GoranStrbac Fundamentals of Power System Economics John Wiley Publication.
REFERENCES: 1. Jizhong Zhu, Optimization of Power System Operation, John Wiley & sons Publication. 2. L. K. Kirchamayer, Economic Operation of Power Systems, John Wiley & sons Publication. 3. Kankar Bhattacharya, Math H.J. Bollen and Jaap E. Daalder, Operation of Restructured Power Systems, Kluwer Academic Publishers. 4. ABC of ABT- A primer on availability based tariff by Bhanu Bhushan, open access on web
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 1 Electrical Engineering (Electrical Power System) Subject Name: Power System Modelling and Simulation
A. Course Objective:
To review Deep concepts of Power System in the field of Power System.
To address the underlying concepts and methods behind Advanced Power System
To impart knowledge of advancement in the field of power system with insight experimental approach.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS104 Power System Modeling and Simulation 4 0 2 6 5 3 70 30 20 30 150
C. Syllabus
SR No. Unit No Topic No. of Hours Weightage In Exam. 1
Unit:1 Network Formulation and Graph Theory: Introduction, Network Equations,Graph Theory, Development of Network Matrices from Graph Theoretic Approach, Building Algorithm for the Bus Impedance Matrix, Modification of ZBUS matrix due to changes in the primitive network, Transformer modeling for Y BUS
08 15% 2 Unit: 2 Load Flow Studies: Introduction, Static Load Flow Equations and solution methods: Gauss Seidal method, Newton Raphson method, De- Coupled method, Fast Decoupled method, Modified Fast Decoupled, Concept of Optimal Power Flow, Solution of Optimal power flow by Gradient method, Solution of Optimal power flow by Newtons method Linear Programming Methods 05 10% Three-phase load flow Mismatch equations, The power flow Jacobian, Performance of the power flow, Continuation power flow.
03 5% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
3 Unit: 3 Load forecasting: Objectives of forecasting - Load growth patterns and their importance in planning Load forecasting Based on discounted multiple regression technique-Weather sensitive load forecasting-Determination of annual forecasting-Use of AI in load forecasting. 08 10% Modelling of Power System Components: The need for modelling of power system, different areas of power system analysis. Simplified models of non-electrical components like boiler, steam & hydro-turbine &governor system. Transformer modelling such as auto-transformer, tap- changing & phase-shifting transformer. 08 10% 4
Unit: 4 Introduction to State Estimation in Power Systems: Introduction, Power system state estimation, Maximum Likelihood Weighted Least Squares Estimation, Introduction, , Maximum Likelihood Concepts, Matrix Formulation, State Estimation of an AC network ,Development of Method, An Introduction to Advanced topics in state estimation, Detection andIdentification of Bad measurements, Estimation of quantities not being measured, Network Observability and Pseudo measurements, Applicationof Power Systems State Estimation 16 30% 5 Unit: 5 Power System Security: Introduction, Factors Affecting Power System Security, Short Circuit Studies of a Large Power System Networks, Symmetrical Fault Analysis Using Bus Impedance Matrix, Algorithm for Formation of Bus ImpedanceMatrix, Contingency Analysis: Detection of Network Problems, Overview ofsecurity analysis, Linear Sensitivity Factors,Contingency Selection,Concentric Relaxation, Bounding 12 20%
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. Experiments shall be performed in the laboratory related to course contents.
E. Students Learning Outcomes
The student can identify different techniques of power system modeling, analysis and their comparison. Student should be able to implement different modeling techniques through simulation in power system. F. Recommended Study Materials
Text & Reference Books: 1. Power Generation Operation & Control, John Wiley & Sons, Inc, 1996- A. J.Wood and B. F. Wollenberg 2. Computational Methods for Electric Power Systems, Second Edition, Mariesa Crow, CRC Press, 2009 3. AC-DC Power System Analysis, IEE London UK, 1998- Jos Arrillaga and Bruce Smith 4. Advanced Power System Analysis and Dynamics, New Age International Ltd,New Delhi, 1992- L. P. Singh 5. Power System Analysis, Tata Mcgraw Hill, New Delhi, 1999- Hadi Sadat 6. Elements of Power System Analysis, W.D. Stevenson Jr., 4 th Edition, Mcgraw hill, 7. Power System Analysis, A.R. Bergen, Vijay Vittal, 2 nd edition, Pearson Publication. 8. Modern Power System Analysis, I.J. Nagarath, D.P.Kothari, 3 rd edition, Tata Mcgraw Hill, New Delhi
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 1 Electrical Engineering (Electrical Power System) Subject Name: Introduction to Optimization (Major Elective-I)
A. Course Objective:
To review the traditional methods of optimization so that they can be implemented in power system operation.
To study new technologies in optimization which would find application in load dispatch and optimal power flow problems.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 105A Introduction to Optimization 4 0 2 6 5 3 70 30 20 30 150
C. Detailed Syllabus
SR No. Unit No Topic No. of Hours Weighatage In Exam 1 Unit:1 Concepts from geometry: Line segments, Hyper planes and linear varieties, Convex set, Neighborhoods, Polyhedra and polytopes, Exercises. 06 10% 2 Unit: 2 Unconstrained Optimization Methods: Introduction, Basics of set-constrained and unconstrained optimization, conditions for local minimizers, Newtons method: Introduction, Analysis of Newton method; Line search method; Gradient methods: Introduction, Method of steepest descent, Analysis of gradient method, Convergence, Convergence rate, Exercises 20 30% 3 Unit: 3 Conventional methods: Linear Programming: Brief history of linear programming, Simple examples of linear programs, two dimensional linear programs, Convex polyhedral and linear programming; Quadratic programming. 12 15% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
4 Unit: 4 Constrained Optimization Methods: Constrained optimization methods with Equality Constraints: Introduction, Problem Formulation, Tangent and Normal Spaces, Lagrange Condition, Second order conditions, minimizing quadratics subject to linear constraints, Exercises. Constrained Optimization Methods with Inequality Constraints: Karush Kuhn Tucker Conditions, Second order Conditions, exercises. 12 25% 5 Unit: 5 Application of Optimization in Power System: Optimal Power Flow using Newton method: Neglecting line security constraints, considering line security constraints; Economic Dispatch using Gradient method, Security constrained economic dispatch using linear programming and quadratic programming, Interior point method for VAR optimization. 10 20%
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. E. Students Learning Outcomes
Students would understand the application of algorithm in different areas of power system including optimal power flow, economic dispatch, load scheduling and sensitivity calculation..
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
F. Recommended Study Materials
Text & Reference Books: 1. An Introduction to Optimization: Edwin K. P. Chong and S. H. Zak, Wiley Publication. 2. Optimization of Power system Operation: Jizhong Zhu, Wiley Publication. 3. Computer Analysis Methods for Power systems: G.T. Heydt, Stars in a Circle Publication.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 1 Electrical Engineering (Electrical Power System) Subject Name: Advanced Power System Protection (Major Elective-I)
A. Course Objective:
This course aims to upgrade the knowledge and skills of practicing engineers and technologies involved in the protection of power system.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS105- B Advanced Power system Protection 4 0 2 6 5 3 70 30 20 30 150
C. Syllabus
SR No. Unit No Topic No. of Hours Weightage In Exam. 1 Unit: 1 Basic Elements of Digital Protection: Application of Numerical relays for Interconnected power system networks, Basic Components of a Digital Relay, Signal Conditioning Subsystems, Transducers ,Surge Protection Circuits, Analogue Filtering, Analogue Multiplexers, Conversion Subsystem, The Sampling Theorem, Signal Aliasing Error, Sample and Hold Circuit, Digital Multiplexing ,Digital-to-Analogue Conversion, Analogue-to-Digital Conversion ,Digital Relay Subsystem, Benefits of digital relays. 12 25% 2 Unit: 2 Relay coordination of Interconnected Power System: Protection of an interconnected system, Link net structure, Flowchart ofprimary/Backup relay pairs, Flowchart of Time Multiplier Setting.Examples based on existing power system network. 10 20% 3 Unit: 3 Reclosing and Synchronizing: Introduction, Reclosing Precautions, Reclosing System Consideration, One-Shot vs. Multiple-Shot Reclosing Relays, Selective Reclosing, Deionizing Times for Three-Pole Reclosing, Live-Line/Dead-Bus, Live-Bus/Dead-Line Control, 20 30% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
Instantaneous-Trip Lockout, Intermediate Lockout, Factors Governing Application of ReclosingConsiderations for Applications of Reclosing , Feeders with No-Fault-Power Back-Feed and Minimum Motor Load, Single Ties to Industrial Plants with LocalGeneration, Lines with Sources at Both Ends, Reclosing Relays andTheir Operation, Review of Breaker Operation, Single-Shot ReclosingRelays, Multishot Reclosing Relays, Synchronism Check, PhasingVoltage Synchronism Check Characteristic, AngularSynchronism. 4 Unit: 4 Concept of Different Relay Algorithms Introduction of different techniques, Least square based methods, Introduction, Integral LSQ fit, Power series LSQ fit, Differential equation based techniques, Basic principles, Digital harmonic filtering by selected limits, Fourier analysis based techniques, Introduction, The full cycle window algorithm, The half cycle window algorithm. 18 25%
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. Experiments shall be performed in the laboratory related to course contents.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
E. Students Learning Outcomes
The student can identify and appreciate concepts of different types of relaying algorithm and numerical relaying. F. Recommended Study Materials
Text & Reference Books:
1. Digital Protection- L P. Singh
2. Protective Relaying Theory and Applications, Walter A. Elmore, Marcel Dekker Inc; New York, 3. Protecting Relaying, Marcel Dekker Inc; New York, 1998- J. L. Blackburn
4. Power System Relaying, John Wiley & Sons, NewYork, 1996- S. H. Horowitz and A. G. Phadke
5. Power System Protection, IEEE Press, Wiley Interscience, A John Wiley & Sons Inc; New York, 1999- P. M. Anderson
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 1 Electrical Engineering (Electrical Power System) Subject Name: Power Quality
A. Course Objective:
To study causes of degradation of power quality. To study remedies of various power quality issues.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 106 Power Quality 3 0 0 3 3 3 70 30 20 0 120
C. Detailed Syllabus
SR No. Unit No Topic No. of Hours Weightage In Exam 1 Unit:1 Introduction Definition of power quality- overview of power quality phenomena- Classification of power quality issues, Power Quality standards 4 10% 2 Unit: 2 Power Frequency Disturbances Introduction, Common power frequency disturbances, Cures for Low-Frequency disturbances, Voltage tolerance criteria Electrical Transients: Transient System Model, Examples of Transient Models and Their Response, Power System Transient Model, Types and Causes of Transients, Examples of Transient Waveforms 10 20% 3 Unit: 3 Harmonics Definition of Harmonics, Odd and Even Order Harmonics, Harmonic Phase Rotation and Phase Angle Relationship, Causes of Voltage and Current Harmonics, Individual and Total Harmonic Distortion, Harmonic Signatures, Effect of Harmonics on Power System Devices, Guidelines for Harmonic Voltage and Current Limitation, Harmonic Current Mitigation. 08 20% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
4 Unit: 4 Power Factor Introduction, Active and Reactive Power, Displacement and True Power Factor, Power Factor Improvement, Power Factor Correction, Power Factor Penalty, Other Advantages of Power Factor Correction, Voltage Rise Due to Capacitance, Application of Synchronous Condensers, Static VAR Compensators
Electromagnetic Interference Frequency Classification, Electrical Fields, Magnetic Fields, Electromagnetic Interference Terminology, Power Frequency Fields, High-Frequency Interference, Electromagnetic Interference Susceptibility, EMI Mitigation, Unbalance: Unbalance in three phase power system, Sources of Unbalance, Effect of Unbalance, Other issues: DC Offset, Electric Noise, Voltage Fluctuation, Flicker and Power Frequency Variation 12 25% 5 Unit: 5 Distributed Generation and Power Quality Resurgence of DG, DG Technologies, Interface to the Utility System Power Quality Issues Operating Conflicts, DG on Distribution Networks, Siting Distributed Generation, Interconnection Wiring and Grounding Resources, Definitions, Reasons for Grounding Typical Wiring and Grounding Problems, Solutions to Wiring and Grounding Problems 06 15% 6 Unit:6 Measuring and Solving Power Quality Problems Power Quality Measurement Devices, Power Quality Measurements, Number of Test Locations, Test Duration, Instrument Setup, Instrument Setup Guidelines 05 10%
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation.
E. Students Learning Outcomes
Students should be able to differentiate among various power quality issues and their remedies in the power system. F. Recommended Study Materials
Text & Reference Books: 1. Roger C. Dugan, Mark F. McGranaghan and H.WayneBeaty, Electrical Power System Quality, MC Graw Hill. 2. C. Sankaran, Power Quality, CRC Press, 2002. 3. Surajit Chattopadhyay Madhuchhanda Mitra, Samarjit Sengupta, Electric Power Quality, Power System series, Springer Publication.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 2 Electrical Engineering (Electrical Power System) Subject Name: Flexible AC Transmission System
A. Course Objective:
To review detail concepts of power System in the field of power Transmission.
To address the underlying concepts and methods behind Advanced Power Systems.
To impart knowledge of power System technologies and their advancement in the field of power conversion.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 201 Flexible AC Transmission System 4 0 2 6 5 3 70 30 20 30 150
C. Detailed Syllabus
SR No. Unit No Topic No. of Hours Weightage In Exam. 1 Unit:1 Introduction: Background., Electrical Transmission Networks., Conventional Control , Mechanisms., Flexible ac Transmission Systems (FACTS), Emerging Transmission Networks, Reactive Power, Uncompensated Transmission Lines, Passive Compensation 06 10% 2 Unit:2 Conventional Reactive-Power Compensators: Synchronous Condensers , The Saturated Reactor (SR) , The Thyristor-Controlled Reactor (TCR) , The Thyristor-Controlled Transformer (TCT), Thristor-Controlled Reactor (MSC-TCR) , ,The Thyristor-Switched capacitor-Thyristor-Controlled Reactor (TSC-TCR). 12 20% 3 Unit:3 SVC Voltage Control: Voltage Control, Effect of Network Resonances on the Controller Response, The 2nd Harmonic Interaction between the SVC and ac Network, Application of the SVC to Series-Compensated ac Systems, 3 rd Harmonic Distortion, Voltage-Controlled Design Studies, Measurement Systems , 12 20% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
4 Unit:4 Series Compensators: Series Compensation, Fixed Series Compensation, Static Synchronous Series Compensators and TCSC, The TCSC Controller, Operation of the SSSC & TCSC, Analysis of the TCSC & SSSC, Capability Characteristics, Harmonic Performance, Losses. Modeling of the TCSC & SSSC, Unified Power Flow Controller (UPFC), Analysis of UPFC. 20 30% 5 Unit:5 Emerging FACTS Controllers The STATCOM, D-Statcom, Distributed Voltage Regulators, The SSSC, Comparative Evaluation of Different FACTS Controllers, Future Direction of FACTS Technology. 10 20%
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. Experiments shall be performed in the laboratory related to course contents.
E. Students Learning Outcomes
Students should be able to understand role of reactive power control and basics of FACTS.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
F. Recommended Study Materials
Text & Reference Books: 1. Understanding FACTS, N.G.Hingorani and L.Gyugyi, Standard Publishers, Delhi, 2001 2. FACTS Controllers in Power Transmission & Distribution: Padiyar K R, New Age International (P) Limited. 3. Reactive Power Control in Electric Systems: T J E Miller, John Willey 4. Power System Stability and Control, PrabhaKundur, Tata McGrahill 5. Thyristor-based FACTS controllers for Electrical Transmission System : R. Mohan Mathur, R K Verma, Wiley IEEE Press
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 2 Electrical Engineering (Electrical Power System) Subject Name: Power System Dynamics & Control
A. Course Objective:
To study steady state and dynamic modeling of generator
To study dynamic modeling of Excitation Systems, Prime movers etc.
To study response of SMIB and multi-machine systems for different cases.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS202 Power System Dynamics & Control 4 0 2 6 5 3 70 30 20 30 150
C. Syllabus
SR No. Unit No Topic No. of Hours Weightage In Exam. 1 Unit:1 Modelling of Generator: Classical Machine Description, Voltage Generation, Open- Circuit Voltage, Armature Reaction, Terminal Voltage, Power Delivered by Generator, Synchronizing Generator to an Infinite Bus, Synchronous Condenser, Role of Synchronous Machine Excitation in Controlling Reactive Power, The Park Transformation, Parks Voltage Equation, Parks Mechanical Equation, Circuit Model, Instantaneous Power Output, Applications, Synchronous Operation, Steady-state Model, Simplified Dynamic Model, Generator Connected to Infinite Bus 16 30% 2 Unit: 2 Modelling of Excitaion System: Excitation System, Excitation System Modeling, Excitation System Standard Block Diagram, System Representation by State Equation, Prime Mover Control System. 08 10% 3 Unit: 3 Dynamics of a Synchronous Generator: System Model, Synchronous Machine Model, Application of Model , Calculation of Initial Conditions, System Simulation, Consideration of Other Machine Model, Inclusion of SVC 12 20% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
Model.
4 Unit: 4 Single machine system Modeling: Small Signal Analysis with Block Diagram Representation, Characteristic Equation (CE) and Application of Routh- Hurwithz Criteion, Synchronizing and Damping Torque Analysis, Small Signal Model : State Equation, Nonlinear Oscillations Hopf Bifurcation. 12 20% 5 Unit: 5 Multi-machine System: Simplified system Model, Detailed models: Case I, Detailed models: Case II, Inclusion of Load and SVC dynamics, Modal Analysis of Large Power Systems, Case Studies. 12 20%
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. Experiments shall be performed in the laboratory related to course contents.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
E. Students Learning Outcomes
The student can identify problems related to multi-machine system and modeling of components of power system..
F. Recommended Study Materials
Text & Reference Books: 1. Power Systems Analysis By Vijay Vittal, Bergen , Pearson Education 2. Power System Dynamics By K R Padiyar, B S Publications 3. Power System Stability & Control, By- P.Kundur,TataMcgraw hill 4. P.Sauer & M.A. Pai, Power System Dynamic & Stability , Prentice Hall Publication. 5. www.ee.iitb.ac.in/~peps/downloads.html
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 2 Electrical Engineering (Electrical Power System) Subject Name: Advanced Power Electronics
A. Course Objective:
To review basic concepts of power electronics in the field of power control and drives
To address the underlying concepts and methods behind Advanced Power Electronics
To impart knowledge of power semiconductor technologies and their advancement in the field of power conversion.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 203 Advanced Power Electronics 4 0 2 6 5 3 70 30 20 30 150
C. Syllabus
SR No. Unit No Topic No. of Hours Approx. Weightage in Exam. 1 Unit:1 Introduction: review of power semiconductor devices: Thyristor, IGBT, MOSFET, IGCT, GTO and their driver circuits, role of SiC in power semiconductor technology 6 10% 2 Unit: 2 AC-DC converter: Uncontrolled rectifier, semi-controlled rectifiers, fully controlled rectifiers with R, RL and RLE load, effect of source inductance on performance of converter, firing schemes and circuits, MULTIPULSE CONVERTERS: Multi-pulse converters: 12,18 and 24 pulse converters, phase shifting transformers POWER FACTOR: power factor improvement techniques, PWM rectifiers: equal area PWM, sine PWM, Single Phase and Three phase boost rectifier circuits 16 25% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
3 Unit: 3 DC-AC converters: Voltage Source Inverter: 120 and 180 conduction modes, PWM techniques of voltage fed converters: Selective Harmonic Elimination (SHE), sine modulation, Third harmonic injection, Hysteresis Current Control, Sigma-Delta Modulation, Space Vector Pulse Width Modulation: undermodulation and overmodulation and their implementation Current Source Inverter: Current Source inverters and their role in high power drives: Autosequential Current Fed inverter, Pulse Width Modulation of CSI Matrix converters: Three phase matrix converters and their control, basic input filter, protection of matrix converter 20 30% 4 Unit: 4 Multilevel inverters: Diode Clamped MLI, Flying Capacitor MLI, Cascaded H-Bridge topology: operation with equal and unequal DC voltages, Carrier modulation schemes of multilevel inverter, SVPWM of Multilevel inverter, Neutral Point Balancing schemes 8 15% 5 Unit: 5 Advance Electrical Drives: Brushless DC motor: Sinusoidal and Trapezoidal BLDC motor, Electronic Commutator, Torque production in BLDC motor, Control of Brushless DC drives Switched Reluctance Motor: Elementary Operation and Principle of operation, Modes of operation, Converter circuits for SRM: Asymmetric Bridge Converter, R-Dump, Bifilar Type converter 10 20%
D. Instructional Methods At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. Experiments shall be performed in the laboratory related to course contents.
E. Students Learning Outcomes
The student can identify different areas power conversion and related topology. Can find the applications of power electronics in day to day life.
F. Recommended Study Materials
Text &Reference Books:
1. Rashid, M. H., Power Electronics Circuits, Devices, and Applications, Prentice- Hall of India Pvt. Ltd., New Delhi, 2nd edition, 1999 2. B.K. Bose, Modern Power Electronics and AC drives, Prentice-Hall of India Pvt. Ltd., New Delhi 3. Dubey G.K., Power Semiconductor Controlled Drives, Prentice-Hall, Eaglewood Cliffs, New Jersey, 2002 4. Ned Mohan, Tore M. Undeland and William P. Robbins, Power Electronics Converters, Applications, and Design, John Willey & Sons, Inc., 2ndEdition, 1999 5. Sen P.C., Thyristor DC drives John wiley and sons, New York, 1981 6. Bin Wu, High power converters and ac drives, Wiley-IEEE Press, 2002.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 2 Electrical Engineering (Electrical Power System) Subject Name: Restructured Power System (Major Elective-II)
A. Course Objective:
To study about the developing countries need to make radical changes in the policy and regulation such that barrier to entry for private players is removed. To study about power sector which depend on the prevailing conditions of respective countries.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 204A Restructured Power System 4 0 2 6 5 3 70 30 20 30 150
C. Detailed Syllabus: SR No. Unit No Topic No. of Hours Weightage In Exam. 1 Unit:1 Introduction to restructuring of power industry: Introduction, Reasons for restructuring / deregulation of power industry, Understanding the restructuring process, Introduction to issues involved in deregulation, Reasons and objectives of deregulation of various power systems across the world 6 10% 2 Unit:2 Fundamentals of Economics Introduction, Consumer behavior, Supplier behavior, Market equilibrium, Short-run and Long-run costs, Various costs of production, Relationship between short-run and long-run average costs, Perfectly competitive market 6 10% 3 Unit:3 The Philosophy of Market Models Introduction, Market models based on contractual arrangements, Comparison of various market models, Electricity vis--vis other commodities, Market architecture 4 10% 4 Unit:4 Transmission Congestion Management Introduction, Classification of congestion management methods, Calculation of ATC, Non-market methods, Market based methods, Nodal pricing, Inter-zonal Intra-zonal congestion management, Price area congestion management, Capacity alleviation method 12 20% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
5 Unit:5 Ancillary Service Management Introduction to ancillary services, Types of ancillary services, Classification of ancillary services, Load-generation balancing related services, Voltage control and reactive power support services, Black start capability service, How to obtain ancillary services?, Co-optimization of energy and reserve services, International comparison 16 25% 6 Unit:6 Pricing of transmission network usage and loss allocation Introduction to transmission pricing, Principles of transmission pricing, Classification of transmission pricing methods, Rolled-in transmission pricing methods, Marginal transmission pricing paradigm, , Composite pricing paradigm, Merits and de-merits of different paradigms, Debated issues in transmission pricing, Introduction to loss allocation, Classification of loss allocation methods, Comparison between various methods 10 15% 7 Unit:7 Market power and generators bidding Attributes of a perfectly competitive market, The firm's supply decision under perfect competition, Imperfect competition, Market power, Financial markets associated with electricity markets, Introduction to optimal bidding by a generator company, Optimal bidding methods 6 10%
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. Simulations will be performed in the laboratory related to course contents.
E. Students Learning Outcomes
The student can understand recent trends in pricing in power system and identify solution for economical market operation F. Recommended Study Materials
Text Books: 1. Fundamentals of Power System economics Daniel Kirschen and Goran Strbac, John Wiley & Sons Ltd, 2004. Reference Books: 1. Making competition work in electricity Sally Hunt, John Wiley & Sons, Inc., 2002. 2. Operation of restructured power systems Kankar Bhattacharya, Jaap E. Daadler, Math H.J Bollen, Kluwer Academic Pub., 2001.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E Semester: 2 Electrical Engineering (Electrical Power System) Subject Name: Harmonic Measurement and Filtration Techniques (Major Elective-II)
A. Course Objective:
To introduce students to measurement of harmonics in the power system To enable students to learn harmonic filtration techniques To impart knowledge of converter topologies and their control strategies in the field of active power filters.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 204B Harmonic Measurement and Filtration Techniques 4 0 2 6 5 3 70 30 20 30 150
C. Syllabus
SR No. Unit No Topic No. of Hours Approx. Weightage in Exam. 1 Unit:1 The instantaneous Power Theory: Basics of p-q Theory, p-q theory in Three phase-Three wire systems, p-q theory in Three phase, Four-wire systems, Instantaneous abc Theory, comparision between pq and abc Theory. 8 10% 2 Unit: 2 Harmonic Filtering Techniques: Passive filter design, single tuned filter, Band pass filter, Tuned harmonic filter design, other methods to decrease harmonic distortion Limits 12 15% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
3 Unit: 3 Active Filters: General description of Shunt Active filters, 3-phase, 3-wire shunt active filters, Active filters for current minimization, Active filters for harmonic damping, 3-phase, 4-wire shunt active filters, Hybrid and series active filters, comparison with pure active filters, Hybrid and series filters Combined series and shunt power conditioners, Unified Power Flow Controller (UPFC), Unified Power Quality Controller (UPQC)- basic concepts. 32 60% 4 Unit: 4 Harmonic Analysis: Harmonic source representation, Harmonic Propagation facts, flux of harmonic currents, Interrelation between AC system and Load Parameters Analysis methods 8 15%
D. Instructional Methods At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. Experiments shall be performed in the laboratory related to course contents.
E. Students Learning Outcomes
Students will be able to measure and mitigate harmonics in the power system. Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
Students will be able to understand various power filter topologies for harmonic mitigation. F. Recommended Study Materials
Text &Reference Books:
1. Harmonics and Power systems By Francisco C. De La Rosa Taylor& Francis group, CRC Press 2. Power System Harmonics, Second Edition J. Arrillaga, N.R. Watson, John Wiley & Sons, Ltd ISBN: 0-470-85129-5 3. Power Electronics Converter Harmonics By Deare A Paice, IEEE Press 4. Instantaneous Power Theory and Application to Power Conditioning By Hirofumi Akagi et al., IEEE Press, Willey-Interscience A Jhon Willey & Son Publication,
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
M.E. Semester: 2 Electrical Engineering (Electrical Power System) Subject Name: Recent Trends in Non-Conventional Energy Systems
A. Course Objective:
To review basic concepts of power system in the field of Non-conventional energy sources.
To address the underlying concepts for recent trends in power system for renewable energy sources.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Tot al Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hr s Hr s Hr s Hrs Hr s Mark s Mark s Mark s Marks MEEPS- 205 Recent Trends in Non- conventional energy systems. 3 0 0 3 3 3 70 30 20 00 120
C. Detailed Syllabus
SR No. Unit No Topic No. of Hours Weightage In Exam. 1 Unit:1 Introduction- Limitation of conventional energy sources, need and growth of alternative energy source, basic scheme and application of direct energy conservation. 4 5% Solar: The sun and earth, solar radiation- availability, measurement and estimation, The sun and earth movement, angle of Sunrays, on solar collector radiation, Estimation solar radiation empirically. Wind: History of wind energy, Wind machine types, classification, and parameters, , general concepts of airfoils and aerodynamics, Analysis of wind flow, measurement of wind speed, Power in wind.
5 15% 2 Unit: 2 Solar Photovoltaic- Introduction to solar cells , solar cell characteristics, losses in solar cells , Model of a solar cell , emerging solar cell Technologies Solar PV modules from solar cells , Mismatching module , hot spots in the module , Bypass 6 10% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
diode , Design and structure of PV modules , PV module power output , I-V and power curve of module. BOS of PV system, Batteries, Battery charge controllers ,DC to DC Converters , DC to AC Converters for AC loads ,Supporting structures for mounting the PV panels , MPPT, Different algorithms for MPPT, Types of PV systems. Design methodology of standalone PV system , Wire sizing in PV system, Precise sizing of PV System, Economic analysis of PV system. 5 10% 3 Unit: 3 Wind Energy- performance calculations of wind turbine, Self Excited induction generator, Stand alone performance of SEIG, Grid connected SEIG, 5 10% Operation principle of DFIG, Chopper fed rotor control in DFIG, Reactive power control and voltage control mechanism in stand-alone Induction generator, MPPT Scheme for wind generation. 5 20% 4 Unit: 4 Fuel Cell: Introduction to fuel cell, principle of operation of fuel cell, stack configuration. Fuel cell Performance, Polymer electrolyte fuel cell, alkaline fuel cell. phosphoric acid fuel cell, molten carbonate fuel cell, solid oxide fuel cells, components of fuel cell, thermodynamics of fuel cell, Fuel cell systems, applications. 5 10% 5 Unit:5 Distributed Generation- An Introduction. Combustion Engine Generator Sets. Combustion Turbines. Photovoltaic Systems. Microturbines. Fuel Cells. Principles of Control of Distributed Generation Systems. Economic and Financial Aspects of Distributed Generation. The Regulatory Environment. Combined Heat and Power. Electric Power Distribution Systems. Installation and Interconnection. Fuels. 10 20%
D. Instructional Method & Pedagogy
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 01
E. Students Learning Outcomes
The students will learn prospects in the field of non-conventional energy conversion. They will be able to identify issues related to electrical technology in the field of renewable energy sources. F. Recommended Study Materials
Text & Reference Books: 1. G D Rai Non-Conventional Energy Sources, Khanna Publications 2. Chetan Singh Solanki , Solar Photo Voltaics ,PHI learning Pvt Ltd., NewDelhi,2009 3. Fuel Cell Handbook, EG&G Technical Services, Inc, USDept of Energy, seventh edition,2004 4. Rashid M.H, Power Electronics Handbook ,Academic Press,California,USA,2001 5. J. A. Duffie and W. A. Beckman Solar Engineering of Thermal Processes, second edition, John Wiley, New York, 1991. 6. S. P Sukhatme Solar Energy- Principle of Thermal collector and storage, Third edition, TMH publication Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
M.E Semester: 3 Electrical Engineering (Electrical Power System) Subject Name: Artificial Intelligence application in power systems
A. Course Objective:
To provide insight into fundamentals of Artificial Intelligence Techniques to the students.
To convey application of Artificial Intelligence techniques in power system.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 301 Artificial Intelligence application in power systems 4 0 2 6 5 3 70 30 20 30 150
C. Detailed Syllabus
SR No. Unit No Topic No. of Hours Approx. Weightage In exams 1 Unit:1 Artificial Intelligence: History and Applications Introduction, Intelligence, Communication, Learning, Artificial Intelligence, History, Early Works, Importance, Definitions, Programming Methods, Techniques, Progress of Artificial Intelligence, Growth of AI, AI and Industry, AI and the world, Current Trends in Applied AI, Modeling, Simulation and AI, Intelligent Systems, Role of IS, Comparisons with conventional programs, Fundamentals of various IS 8 10% 2 Unit: 2 Artificial Neural Network: difference between human machine and intelligence, biological neural network, artificial neuron model, Concept of Perceptron, ADALINE, Feedback in Neural Network, Neural Network Architectures: Neural Learning, Application of Neural Network in Power System 12 15% 3 Unit: 3 Fuzzy Logic: Introduction, Foundation of Fuzzy Systems, Representing Fuzzy Elements, Basic Terms and Operations, Properties of Fuzzy Sets, Fuzzification, Arithmetic Operations of Fuzzy Numbers, The alpha cut method, The extension method , Linguistic Descriptions and their Analytical Forms, Fuzzy Linguistic Descriptions, Fuzzy Relation Inferences, 12 20% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
Fuzzy Implication and Algorithms, Defuzzification Methods, Centre of Area Defuzzification, Centre of Sums Defuzzification 4 Unit: 4 Genetic Algorithms and Evolutionary Programming: Introduction, Genetic Algorithms, Procedure of Genetic Algorithms, Genetic Representations, Initilization and Selection, Genetic Operators, Mutation, The Working of Genetic Algorithms, Evolutionary Programming, The Working of Evolutionary Programming 10 15% 5 Unit: 5 Application of AI in Power Systems: Application of Neural Network and Expert Systems in Voltage Control, Application of ANN for security assessment, Schedule Maintenance of Electrical Power Transmission Networks using Genetic Algorithm, Intelligent Systems for Demand Forecasting 18 40%
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. Experiments shall be performed in the laboratory related to course contents.
E. Students Learning Outcomes
Students should be able to understand concepts of Artificial Intelligence and their role in optimization. Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
F. Recommended Study Materials
Text & Reference Books: 1. Artificial Intelligence and Intelligent Systems, OXFORD University Press, New Delhi, 2005- N. P. Padhy 2. Understanding Neural Networks and Fuzzy Logic: Basic concepts and Applications, Prentice Hall India Private Limited, New Delhi,2002- Stamations V. Kartalopoulos 3. Artificial Intelligence Techniques in Power Systems, IEE Power Engineering Series, UK, 1997- Kevin Warwick, Arthur Ekwue and Raj Aggarwal 4. Intelligent Systems and Signal Processing in Power Engineering, Springer Berlin Heidelberg, New York- Abhisek Ukil
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
M.E Semester: 3 Electrical Engineering (Electrical Power System) Subject Name: Microcontroller based System Design (Major Elective-III)*
A. Course Objective:
To study application of microcontroller in the field of power electronics
To study implementation of digital control systems in power system & power electronics.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Evaluation Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 302A Microcontroller based System Design* 4 0 2 6 5 3 70 30 20 30 150
C. Detailed Syllabus: SR No. Unit No Topic No. of Hours Approx. Weightage In exams 1 Unit-1 Introduction: Interfacing of I/O devices, Timer/Counter operation and their role in power electronic control, Interrupts operation and their role in control Introduction to TMS320F2812 DSP controller, architecture, peripherals, IQ math and use of DSP controller for IQmath 10 10% 2 Unit-2 DSP controller and peripherals: General Purpose Input Output pins Introduction, Multiplexing of I/O pins, Input qualification, Use of GPIO for control for converter Analog to Digital Conversion Introduction, Internal structure of ADC in TMS320F281x, Autoconversion Sequencer Principle of Operation, Uninterrupted Autosequenced Mode, Control word and application Event Manager Operation of Timer in various modes, PWM/CMP Units and their operation, SVPWM unit, Capture unit, QEP circuit and their operation and other feature of Event Manager 16 30% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
3 Unit-3 AC/DC converter: Interfacing circuits for AC/DC converter, Zero crossing detection method, control in discontinuous conduction, Algorithm development, Single phase half/fully controlled converter, Three phase converters and their control in open loop and closed loop mode DC/DC converter: Implementation of DSP algorithm in buck, boost and buck- boost converters, interfacing circuits, closed loop control 12 20% 4 Unit-4 DC/AC converter(Inverter): Control of VSI in six-step mode, implementation of various PWM schemes with DSP controller, Implementation of SVPWM algorithm using PWM unit/SVPWM unit AC/AC converter Control of matrix converter and algorithm implementation
16 30% 5 Unit-5 Case Study Development of case study for any real time power electronic system 06 10%
D. Instructional Methods
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. Two internal exams may be conducted and average of the same may be converted to equivalent of 15 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of five marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. The course includes a laboratory, where students have an opportunity to build an appreciation for the concept being taught in lectures. Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
Experiments shall be performed in the laboratory related to course contents.
E. Students Learning Outcomes
Students can develop microcontroller based system in the area of power electronics and power system.
F. Recommended Study Materials
Text & Reference Books:
1. B.K.Bose , Microcomputer control of Power Electronic and Drives, IEEE Press USA. 2. Study material on Microprocessor control of Electric Drives, QIP Centre publication, P. Agarwal, V.K. Verma 3. Datasheet on TMS320F2812 DSP controller family 4. A manual on TMS320F281x DSP CPU and Instruction set reference guide, Texas Instruments Co. 5. A manual on TMS320F281x ADC reference guide, Texas Instruments Co. 6. A manual on TMS320F281x Event Manager guide, Texas Instruments Co. 7. Application notes on TMS320F281x DSP controllers.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
M.E Semester: 3 Electrical Engineering Subject Name: Power System Planning and Reliability (Major Elective-III)
A. Course Objective:
To understand deeply about generation and transmission reliability.. To study about distribution system planning and reliability.
B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Examination Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 302B Power System Planning and Reliability 4 0 2 6 5 3 70 30 20 30 150
C. Detailed Syllabus
SR No. Topic No. of Hours Weightage in % in Exam Unit-1 Load forecasting & Reliability: Classification and characteristics of loads. Approaches to load forecasting. Forecasting methodology. Energy forecasting. Basic Reliability Concepts: General reliability function, Markov Chains and processes and their applications, simple series and parallel system models. load forecasting uncertainty, Spinning Generating Capacity Reliability Evaluation: Spinning capacity evaluation,
16 30% Unit-2 Genration System Reliability analysis: Probabilistic generation and load models- Determination of LOLP and expected value of demand not served Determination of reliability of iso and interconnected generation systems 08 15%
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
Unit-3 Transmission System Reliability Analysis: Deterministic contingency analysis, Average interruption rate method. The frequency and duration method, Stormy and normal weather effects probabilistic load flow-Fuzzy load flow probabilistic transmission system reliability analysis- Determination of reliability indices like LOLP and expected value of demand not served. Interconnected Systems Generating Capacity Reliability Evaluation, The loss of load approach. Reliability evaluation in two and more than two interconnected systems. Interconnection benefits. 16 30%
Unit-4 Expansion Planning: Basic concepts on expansion planning- procedure followed for integrate transmission system planning. current practice in India-Capacitor placer problem in transmission system and radial distributions system. 12
15%
Unit-5 Distribution System Planning Overview: Introduction, sub transmission lines and distribution substations-Design primary and secondary systems, Distribution system protection and coordination of protective devices. Parallel & Meshed Networks, Basic Evaluation Techniques, Bus Bar Failure, Scheduled Maintenance, Temporary and Transient Failure, Weather Effects, Breaker Failure. 8 10%
D. Instructional Method & Pedagogy
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. & equal weightage should be given to all topics while teaching and conduction of all examinations. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. One/Two internal exams may be conducted and total/average/best of the same may be converted to equivalent of 30 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of ten marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation. Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
E. Students Learning Outcome: On successful completion of the course, the student can learn about power system transmission and distribution planning as well as reliability.
F. Suggested Reading: 1. R.L .Sullivan, Power System Planning, Tata Mcgraw hill. 2. Roy Billinton and Allan Ronald, Power System Reliability. 3.Turan Gonen, Electric power distribution system Engineering McGraw Hill,1986 4. Modern Power System Planning . X. Wang and J.R. McDonald, McGraw Hill 5. Electrical Power Distribution A.S. Pabla, Tata McGraw Hill.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
M.E Semester: 3 Electrical Engineering Subject Name: Energy Management and Audit
A. Course Objective:
To present a problem oriented introductory knowledge of Energy management and energy audit. To understand basic concepts of Energy conservation. To understand Energy efficiency and cost benefit. To understand Conflict between energy consumption and optimization. B. Teaching / Examination Scheme
SUBJECT Teaching Scheme Total Examination Scheme Total L T P Total Credit THEORY IE CIA PR. / VIVO
CODE NAME Marks Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks MEEPS- 303 Energy Management and Audit 3 0 0 3 3 3 70 30 20 00 120
C. Detailed Syllabus:
SR No. Topic No. of Lectures Weightag e in % in Exam Unit:1 Essentials of Energy Management: Introduction Scope of Energy Management Necessary Steps of Energy Management Programme General Principles of Energy Management Qualities and Functions of an Energy Manager The Language of the Energy Manager.
Method of investment appraisal Rate of return method - Pay back method Net present value method (NPV) - Internal rate of return method (IRR) Capital budgeting.
Essentials of Energy Management: Introduction Scope of Energy Management 12 25% Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
Necessary Steps of Energy Management Programme General Principles of Energy Unit: 2 Energy Auditing: Introduction Objective of Energy Audit Control of Energy Uses of Energy Energy Conservation Schemes Energy Index Cost Index Pie Chart Sankey Diagram Load Profile Types of Energy Audit General Energy Audit Sankey Questionnaire Sample Questionnaire Energy Audit Case Studies 09 20% Unit: 3 Energy Conservations: Introduction Indian Energy Conservation Act, 2001(EC Act) The Electricity Act 2003 Rules for Efficient Energy Conservation of Energy and Materials. Technologies for Energy Conservation Design of EC Energy Flow Networks Critical Assessment of Energy Use Formulation of Objectives and Constraints. 09 20% Unit: 4 Improvement of Energy Efficiency: Thermal Plant: Waste Heat Advantages of Recuperators Air Preheaters and Economizers Furnaces Fans and Blowers Compressors Pumps Energy Audits Case studies, Tips for energy conservation in domestic and industrial Sectors 09 20% Unit-5 Electrical Energy Management: Introduction Power Factor Control Tariff Energy Efficient Motors Case Study Energy Efficient Lighting Life cycle Cost Analysis (LCC analysis) Equivalent Annual Worth(EAW) Break Even Analysis. 06 15%
D. Instructional Method & Pedagogy
At the start of course, the course delivery pattern , prerequisite of the subject will be discussed Lecture may be conducted with the aid of multi-media projector, black board, OHP etc. & equal weightage should be given to all topics while teaching and conduction of all examinations. Attendance is compulsory in lectures and laboratory, which may carries five marks in overall evaluation. One/Two internal exams may be conducted and total/average/best of the same may be converted to equivalent of 30 marks as a part of internal theory evaluation. Assignment based on course content will be given to the student for each unit/topic and will be evaluated at regular interval. It may carry an importance of ten marks in the overall internal evaluation. Surprise tests/Quizzes/Seminar/Tutorial may be conducted and having share of five marks in the overall internal evaluation.
Kadi SarvaVishwavidyalaya University Electrical Deptt.
2013. KSV University. All Rights Reserved. Rev. 00
E. Students Learning Outcomes
On successful completion of the course
The student can acquire the basic knowledge of electric energy, electrical fundamentals, thus being prepared to pursue any area of engineering spectrum in depth as desired. The students will be able to effectively employ electrical systems and lead the exploration of new applications and techniques for energy saving. The students will be able work with energy management system and energy audit of whole system.
F. Suggested Books: 1. KV Sharma,P.Venkataseshaiah: Energy management and conservation IK International publishing house Pvt. Ltd. 2. Guide book for national certification examination for energy managers and energy auditors, Books1,2,3 &4-Bureau of Energy Efficiency, Ministry of power, Govt. of India 3. Turner W.C.: Energy management handbook
Studi Analisis Setting Filter Aktif Terhadap Peningkatan Kualitas Daya Listrik Di Gedung Perkuliahan Fakultas Teknik Universitas Udayana Jalan PB Sudirman