for performance drilling PowerDrive X5 S chlumbergers objective when providing directional drilling services is to drill from shoe to total depth in one run, every time, at maximum ROP. The PowerDrive X5* rotary steerable systems were developed with that objective in mind. These systems represent a step change in reliability and efficiency, facilitating the drilling of longer runs, optimizing wellbore placement, and reducing drilling time. The cost savings that result can be direct and substantial. An automatic inclination hold and efficient downlink function minimize the interaction with the directional driller needed to maintain directional control while drilling ahead. Less time needed for surface interaction means more time spent drillingup to 15% improvement in drilling performance has resulted from increasing productive time on bottom every drilling day. All PowerDrive X5 external parts rotate. That rotation reduces drag, improves ROP, decreases the risk of differential or mechanical sticking, and achieves superior hole cleaning and conditioning. Working in combination with the systems automatic trajectory functionality, the full rotation increases wellbore smoothness and decreases tortuosity. This reduces drilling torque, improves drilling efficiency, and eliminates the need for unplanned Fully rotating steerable systems drill more footage per day and leave a smooth, high-quality borehole for easier cementing and casing running PowerDrive X5 systems reach TD in less time and optimize production by putting wells in the best place DRILL WELLS IN LESS TIME IN THE BEST PLACE I Operate reliably in hot holes I Get structural information close to bit for real-time detection of dip and fault boundaries I Increase time on bottom through efficient downlinking and trajectory lock-in I Optimize rate of penetration I Decrease risk of sticking I Improve borehole quality and hole cleaning to reduce drilling torque and facilitate running of casing I Maximize length of drainhole in pay through precise directional control, tight control of TVD, and near-bit formation evaluation data I Optimize casing and coring point selection wiper trips. The smooth wellbore also makes it easier to run casing and simplifies activities later in the life of the well, such as coiled tubing intervention and electrical submersible pump installation. ENGINEERED FOR RELIABILITY PowerDrive X5 systems are engineered to deliver a step change in reliability. A robust steering section and advanced coating materials that mitigate wear ensure reliable, consistent performance in a wide range of drilling environments. Optimized flow profiles reduce the risk of sticking, limit the effects of mud solids, and reduce erosion of internal and external downhole components. The systems electronics, which are chassis mounted for reliability and durability, can operate in downhole temperatures as high as 300 degF [150 degC]. DESIGNED FOR ACCURATE DRILLING AND WELLBORE PLACEMENT Near-bit measurements, available in real time, ensure accurate, efficient drilling and wellbore placement. Efficient downlink systems and automatic inclination hold provide a smooth tangent section and improve true vertical depth accuracy in the horizontal sectioncritical for maximizing recoverable reserves and the wells production potential. An MWD-type triaxial sensor package close to the bit provides accurate azimuth and inclination directional information, which allows fast, responsive directional control in either automatic or manual operation mode. Once a target formation has been penetrated, the trajectory can be locked in using the inclination hold functionality. No further input is required from the directional driller. Steering decisions are further aided by an optional real-time azimuthal gamma ray measurement and imaging of the wellbore to provide information on formation dip or fault boundaries. An azimuthal gamma ray sensor close to the bit enables drillers and geologists to identify bed boundaries quickly, allowing faster response to formation changes. This optimizes well placement and casing and coring point detection. It also minimizes penetration of formations to be cored and significantly reduces the chances of drilling through a potentially valuable core section or wasting time coring an uninteresting formation. Drill longer runs, optimize wellbore placement, and reduce drilling time from kickoff to total depth PowerDrive X5 PowerDrive X5 Specifications PowerDrive X5 475 PowerDrive X5 675 PowerDrive X5 825 PowerDrive X5 900 PowerDrive X5 1100 Nominal OD (API) 4.75 in [120.7 mm] 6.75 in [171.5 mm] 8.25 in [209.6 mm] 9.00 in [228.6 mm] 9.50 in [241.3 mm] Hole size 5 3 4 in to 6 1 2 in 8 1 2 in to 9 7 8 in 10 5 8 in 12 1 4 in to 14 3 4 in 16 in to 22 in Overall length 14.95 ft [4.56 m] 13.48 ft [4.11 m] 14.60 ft [4.45 m] 14.60 ft [4.45 m] 15.10 ft [4.60 m] Max. collar dogleg 20/100 ft [20/30 m] sliding, 20/100 ft [20/30 m] sliding, 20/100 ft [20/30 m] sliding, 20/100 ft [20/30 m] sliding, 20/100 ft [20/30 m] sliding, 10/100 ft [10/30 m] rotating 10/100 ft [10/30 m] rotating 10/100 ft [10/30 m] rotating 10/100 ft [10/30 m] rotating 10/100 ft [10/30 m] rotating Build rate 0 8/100 ft 0 8/100 ft 0 6/100 ft 0 5/100 ft 0 3/100 ft Max. operating torque 4,000 ft.lbf [5,420 N.m] 16,000 ft.lbf [21,700 N.m] 16,000 ft.lbf [21,700 N.m] 48,000 ft.lbf [65,000 N.m] 48,000 ft.lbf [65,000 N.m] Max. operating load 340,000 lbf [1,500,000 N] 1,100,000 lbf [4,900,000 N] 1,100,000 lbf [4,900,000 N] 1,400,000 lbf [6,200,000 N] 2,280,000 lbf [10,140,000 N] Max. weight on bit 50,000 lbf [223,000 N] 65,000 lbf [290,000 N] 65,000 lbf [290,000 N] 65,000 lbf [290,000 N] 65,000 lbf [290,000 N] Weight of assembly in air 754 lbf [3,300 N] 1,700 lbf [7,500 N] 1,900 lbf [8,455 N] 2,370 lbf [10,500 N] 2,584 lbf [11,490 N] Max. lost circulation 35 lbm/bbl nut plug 50 lbm/bbl nut plug 50 lbm/bbl nut plug 50 lbm/bbl nut plug 50 lbm/bbl nut plug material Flow range 220400 galUS/min [8301,500 L/min] 320650 galUS/min [1,2002,460 L/min] 4801,500 galUS/min [1,8006,800 L/min] 4801,900 galUS/min [1,8007,200 L/min] 4801,900 galUS/min [1,8207,200 L/min] Lateral vibrations Shock level 3 (50-g n threshold), Shock level 3 (50-g n threshold), Shock level 3 (50-g n threshold), Shock level 3 (50-g n threshold), Shock level 3 (50-g n threshold), 30-min limit 30-min limit 30-min limit 30-min limit 30-min limit Stick/slip 100% mean rotational speed, 100% mean rotational speed, 100% mean rotational speed, 100% mean rotational speed, 100% mean rotational speed, 30-min limit 30-min limit 30-min limit 30-min limit 30-min limit Max. rotational speed 250 rpm 220 rpm 220 rpm 200 rpm 200 rpm Max. temperature 300 degF [150 degC] 300 degF [150 degC] 300 degF [150 degC] 300 degF [150 degC] 300 degF [150 degC] Max. hydrostatic pressure 20,000 psi [138 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa] Pressure drop across tool Density (in lbm/galUS) Flow 2 (in galUS/min) Density (in lbm/galUS) Flow 2 (in galUS/min) Density (in lbm/galUS) Flow 2 (in galUS/min) Density (in lbm/galUS) Flow 2 (in galUS/min) Density (in lbm/galUS) Flow 2 (in galUS/min) 14,500 56,000 56,000 259,000 337,500 Recommended pressure 600800 psi [4.15.5 MPa] 600800 psi [4.15.5 MPa] 600800 psi [4.15.5 MPa] 600800 psi [4.15.5 MPa] 600800 psi [4.15.5 MPa] drop across bit Mud sand content 1% by volume 1% by volume 1% by volume 1% by volume 1% by volume Rotary Connections Collar upper connection 3 1 2 IF box 4 1 2 IF box 6 5 8 Reg box 6 5 8 Reg box 7 5 8 Reg box Bit box 3 1 2 Reg 4 1 2 Reg 6 5 8 Reg 6 5 8 Reg 7 5 8 Reg Sensors Bit box to gamma ray 5.86 ft [1.79 m] 6.40 ft [1.95 m] 7.56 ft [2.30 m] 7.56 ft [2.30 m] 7.97 ft [2.43 m] Bit box to inclination 6.73 ft [2.05 m] 7.27 ft [2.21 m] 8.43 ft [2.57 m] 8.43 ft [2.57 m] 8.83 ft [2.69 m] Bit box to azimuth 8.83 ft [2.69 m] 9.37 ft [2.85 m] 10.53 ft [3.21 m] 10.53 ft [3.21 m] 10.93 ft [3.33 m] Inclination accuracy 0.4 (0.05 resolution) 0.4 (0.05 resolution) 0.4 (0.05 resolution) 0.4 (0.05 resolution) 0.4 (0.05 resolution) Azimuth accuracy 0.8 (0.10 resolution) 0.8 (0.10 resolution) 0.8 (0.10 resolution) 0.8 (0.10 resolution) 0.8 (0.10 resolution) Gamma ray accuracy, 5% (30-s averaging window) 5% (30-s averaging window) 5% (30-s averaging window) 5% (30-s averaging window) 5% (30-s averaging window) azimuthal 4-quadrant Shock detector threshold, 50 g n 5 g n ( 500 g n max. peak) 50 g n 5 g n ( 500 g n max. peak) 50 g n 5 g n ( 500 g n max. peak) 50 g n 5 g n ( 500 g n max. peak) 50 g n 5 g n ( 500 g n max. peak) radial www.slb.com/powerdrive PowerDrive X5 *Mark of Schlumberger Other company, product, and service names are the properties of their respective owners. Copyright 2007 Schlumberger. All rights reserved. 07-DR-283 I Reliable operations at temperatures up to 300 degF [150 degC] I Optional near-bit azimuthal gamma ray measurements and imaging I Automatic inclination hold in tangent and horizontal sections I Fully rotating system I Good cuttings flow characteristics I Improved downlink while drilling I Electronics based on industry-leading PowerPulse* MWD telemetry system technology I Reaming, back-reaming, and drilling out of shoe using standard drilling practice I Directional measurements near bit, including azimuth at bit I Simple, rugged steering section designed for performance and reliability DESIGNED FOR PRODUCTIVE DRILLING