1. Stan, C. (2002). Direct Injection Systems: The Next Decade in
Engine Technology, SAE International, Warrendale, PA. 2. Morita, K. (2003). Automotive power source in 21st century. JSAE Review, Vol. 24, 3-7. 3. Vourenkoski, A.K. (2004). Development of a Liquid-phase LPG MPI Conversion System, PhD Thesis, Cranfield University, Cranfield. 4. Mohamad, T.I.; Harrison, M.; Jermy, M.; Theodoridis, E. &Dolinar, A. (2005). Preliminary Investigation of the Combustion and Performance of Methane Direct Injection in a Single-Cylinder Engine Using Spark Plug Fuel Injector (SPFI) for Low Cost Conversion, in the Proceedings of the ATCi 2005, Conference on Automotive Technology, Dec 6-8, Putrajaya, Malaysia. 5. Huang, Z.; Shiga, S.; Ueda, T.; Nakamura, H.; Ishima, T.; Obokata, T.; Tsue, M. &Kono, M. (2003). Combustion Characteristics of Natural-gas Direct-injection Combustion under Various Fuel Injection timings. Proceeding Institute of Mechanical Engineers (Part D): Journal of Automobile Engineering, Vol. 21, 393 401 6. http://www.afdc.energy.gov/data/tab/fuels- infrastructure/data_set/10460 7. Bradley, D.; Gaskell, P.H. &Gu, X.J. (1996). Burning Velocities, Markstein Lengths, and Flame Quenching for Spherical Methane-Air Flames: A Computational Study. Combustion and Flame, Vol. 104, 176-198 8. http://www.afdc.energy.gov/data/tab/fuels- infrastructure/data_set/10330 9. Zhao, F. et al. (1999). Automotive spark-ignited direct injection gasoline engines. Progress in Energy and Combustion Science, Vol. 25, 437-562. 10. Zhao, F.; Harrington, D.L. & Lai, M.C. (2002). Automotive Gasoline Direct-Injection Engines, SAE International, Warrendale, PA. 11. Shashikantha.; Parikh, P.P. (1999). Spark ignition producer gas engine and dedicated compressed natural gas engine- Technology development and experimental performance optimization. SAE Paper.1999-01-3515. 12. Kato, K.; Igarashi, K.; Masuda, M.; Otsubo, K.; Yasuda, A.; Takeda, K.; Sato, T. (1999). Development of engine for natural gas vehicle. SAE Paper. 1999-01-0574. 1999. 13. Czerwinski J.; Comte P.; Janach.W.;Zuber P. (1999). Sequential Multipoint Trans-Valve- Injection for Natural Gas Engines. SAE Paper. 1999-01-0565. 14. Wang, D. E and Watson, H. C. (2000). Direct injection compressed natural gas combustion and visualization. SAE Paper 2000-01-1838. 15. Chiu, J.P. (2004). Low Emissions Class 8 Heavy-Duty, On- Highway Natural Gas and Gasoline Engine. SAE Paper. 2004-01- 2982. 16. Brombacher, E.J. (1997). Flow Visualisation of Natural Gas Fuel Injection, MSc Thesis, University of Toronto. 17. Durrel, Elizabeth.; Allan, Jeff.; Law, Donald.; Heath, John. (2000). Installation and Development of a Direct Injection System for a Bi-Fuel Gasoline and Compressed Natural Gas. Proceeding of ANGV Conference 2000. October 17 19, 2000. Yokohama: ANGV. 18. Oullette, P.; Mtui, P.L.; Hill, P.G. (1998). Numerical Simulation of Directly Injected Natural Gas and Pilot Diesel Fuel in a Two Stroke Compression Ignition Engine. State of Alternative Fuel Technologies. SAE Paper 981400. 19. Evan, R.L.; Blaszczyk, J.; and Matys, P. (1996). An Experimental and Numerical Study of Combustion Chamber Design for Lean-Burn Natural Gas Engines. SAE Paper. 961672. 20. Duan, S.Y. (1996). Using Natural Gas in Engines: Laboratory experience with the use of natural gas fuel in IC engines. IMechE Seminar Publication, 1996: 39- 46. 21. Vermiglio. E; Jenskins, T.; Kleliszewski, M.; Lapetz, J.; Povinger, B.; Willey, R.; Herber, J.; Sahutske, K.; Blue, M, and Clark, R. (1997). Fords SULEV Dedicated Natural Gas Trucks. SAE Paper. 971662. 22. www.afdc.energy.gov/vehicles/natural_gas.html 23. pttweb2.pttplc.com/webngv/en/kw_sp.aspx 24. www.brighthub.com/environment/renewable-energy/articles/118992.aspx 25. www.ngvcommunity.com/?pageid=126&messageid=317&cac=0 26. Semin, Rosli Abu Bakar.2008. A Technical Review of Compressed Natural Gas as an Alternative Fuel For Internal Combustion Engines. Science Publications. 27. Rahmat Sotudeh-Gharebagh, Jamal Chaouki and Amir Sheikhi. 2012. Environmentally Feasible Natural Gas Combustion in Fluidized Beds. IACSIT Press, Singapore. 28. Rosli Abu Bakar, K. Kadirgama, M.M. Rahman, K.V. Sharma and Semin. Application of Natural Gas for Internal Combustion Engines 29. Salma A. Iqbal, M. Iqbal, A.F.M. Salauddin. Present Scenario of Compressed Natural Gas (CNG) as a Vehicular fuel in Bangladesh. 30. Fanhua Ma, Nashay Naeve, Mingyue Wang, Long Jiang, Renzhe Chen, Shuli Zhao. Hydrogen-enriched compressed natural gas as a fuel for engines. 31. Francis T.Connolly, Andrew E.Yagle. 1992. Modelling and identification of the combustion pressure process in internal combustion engines. 32. http://www.habmigern2003.info/1_combustion.html 33. M. Weclas, J. Cypris. May 27, 2011. COMBUSTION OF DIESEL SPRAY : LOW AND HIGH TEMPERATURE OXIDATION PROCESS FOR FREE DIESEL INJECTION AND IN POROUS REACTORS. 34. Kenneth Gillingham. January 2007. Hydrogen Internal Combustion Engine Vehicles. 35. Albela H.Pundkar,S.M. Lawankar, Dr. Sameer Deshmukh. March 2012. Performance and Emissions of LPG Fueled Internal Combustion Engine: A Review. 36. Ke Zeng, Zuohuo Huang, Bing Liu, Liangxing Liu, Deming Jiang, Yi Ren, JinHua Wang. 2006. Combustion Characteristics of a direct injection Natural gas engine under various fuel injection fuel timing. 37. Ashish S. Lanje, Prof. M. J. Deshmukh. October 2012. Performance and Emission Characteristics of SI Engine using LPG Ethanol Blends: A Review. 38. Mayank Jha, Archana Singh, R.K Tyagi, M K Verma. December 2012. Comparative Study of Exhaust Emission of Commonly Used Fuel in an Internal Combustion Engine. 39. Pravin T. Nitnaware, Jiwak G Suryawansanshi. 2011. Performance and Emission Reduction of Multi Cylinder Gasoline Using CNG Sequential Injection. 40. refer to pdflogi no 4 5 6 7 8 9 15 18 19