CURSO DE ESPECIALIZACIN EN CIERRE DE MINAS Y PASIVOS AMBIENTALES
GerMecRoc_Referencias.doc 1 CURSO GERENCIAL SESIN MECANICA DE ROCAS
REFERENCIAS
DISEO DE TAPONES Las siguientes referencias sirvieron como base para el diseo de tapones en minera: Cdigos de Materiales ACI (1972) - Building Code Requirements for Structural Plain Concrete. Prepared by American Concrete Institute, ACI 322-72. ACI (1995) - Building Code Requirements for Structural Concrete. Prepared by American Concrete Institute, ACI 318-95. Canadian Standards Association (1994). CSA International, A23.1-00/A23.2-00. Concrete Materials and Methods of Concrete Construction/Methods of Test for Concrete. September. Diseo de Tapones de Concreto Auld, F.A. (1983). Design of Underground Plugs. International Journal of Mining Engineering, Vol. 1, pp. 189 228. Benson, R.P. (1989). Design of Unlined and Lined Pressure Tunnels. Tunnelling and Underground Space Technology, Vol. 4 # 2, pp. 155-170. Chekan, G.I. (1985). Design of Bulkheads for Controlling Water in Underground Mines USBM Inf. Circ. 9020, 36 pp. Dahl, T.S., Bergh-Christensen, J. and Broch, E. (1992). A Review of Norwegian High Pressure Concrete Plugs. Proc. Hydropower92, Broch & Lysne (eds), Balkema, pp. 61 - 68. PONTIFICIA UNIVERSIDAD CATLICA DEL PER SECCIN INGENIERA DE MINAS CURSO DE ESPECIALIZACIN EN CIERRE DE MINAS Y PASIVOS AMBIENTALES
GerMecRoc_Referencias.doc 2 Djahanguiri, F.D. and Abel, J.F. (1997). Design and Construction of a Bulkhead for a Simulated Underground Leaching Stope. Mining Engineering, January. Einarson, D.S. and Abel, J.F. (1990). Tunnel Bulkhead for Acid Mine Drainage. Proc. Symp. on Unique Underground Structures, Vol. 2, pp.71-1 to 71-20. EPRI (1987). Design Guidelines for Pressure Tunnels and Shafts. Report # AP-5273 submitted to Electric Power Research Institute, EPRI, and prepared by University of Berkeley. Garrett, W.S., and Campbell Pitt, L.T. (1958). Tests on an Experimental Underground Bulkhead for High Pressures. J. S. African Inst. Min. and Metall., Oct. pp. 123-143. Garrett, W.S., and Campbell Pitt, L.T. (1961). Design and Construction of Underground Bulkhead and Water Barriers. Transactions 7th Commonwealth Mining and Metall. Congress S. African Inst. Min. and Metall., Vol. 3, pp. 1283-1302. Golder Associates, Cours Sur La Conception des Barricades dans les Mines Souterraines, Montreal, May 2004. Lang, B. (1999). Permanent Sealing of Tunnels to Retain Tailings or Acid Rock Drainage. Congress of the International Mine Water Association, Sevilla. Loofbourow, R.L. (1973). Underground Bulkheads and Plugs. Mining Engineering Handbook. Section 26.7.1. Ground Water and Ground Water Control. Ch. 26, I.A. Given. ed., SME pp. 26-46 to 26-48. Morrison Hershfield Burgess & Higgins Ltd. (1978). Bulkheads and Dams for Mines. Morrison Hershfield Ltd. (1988). Bulkhead Design for Various Drifts on the 150 ft. and 275 ft. levels and the shaft. Report # 188-0329 prepared the McWatters Mine, Quebec. Ontario Ministry of Labour (1978 and update 1995 version). Bulkhead and Dams for Underground Mines - Design Guidelines. Palmstrm, A. (1987). Norwegian Design and Experience of Unlined Pressure Shafts and Tunnels. Underground Hydropower Plants. Oslo June 1987, pp. 87-99. PONTIFICIA UNIVERSIDAD CATLICA DEL PER SECCIN INGENIERA DE MINAS CURSO DE ESPECIALIZACIN EN CIERRE DE MINAS Y PASIVOS AMBIENTALES
GerMecRoc_Referencias.doc 3 Seed, H.B., Idriss, I.M. and Arango, I. (1983). Evaluation of Liquefaction Potential Using Field Performance Data. Journal of Geotechnical Engineering, ASCE, Vol. 109, No. 3, pp. 458-482. Westergaard, H.M. (1931). Water Pressure on Dams during Earthquakes. Trans. American Society of Civil Engineers. Paper No. 1835. Mecnica de Rocas Barton, N., 1976, "Recent Experiences With the Q-System of Tunnel Support Design", Proc. Sym. on Exploration for Rock Engineering, Johannesburg. Barton, N., Grimstad, E., Aas, G., Opsahl, O., Bakken, A., Johansen, E., 1992, "Norwegian Method of Tunnelling", World Tunnelling, June, pp. 231-238. Barton, N., Loset, F., Lien, R., and Lunde, J., 1980, Applications of the Q-System in Design Decisions. In Subsurface Space, (ed. M. Bergman) 2, 553-561, New York: Pergamon. Barton, N.R., Lien, R., and Lunde, J. (1974). "Engineering Classification of Rock Masses for the Design of Tunnel Support". Rock Mechanics, Vol. 6, No. 4, pp. 189-263. Bieniawski, 1976, Rock Mass Classification in Rock Engineering. Exploration for Rock Engineering, ed. Z.T.Bieniawski, A.A. Balkema, Johannesburg, pp. 97-106. Bieniawski, Z.T., 1976, Rock Mass Classification in Rock Engineering, Proc. Symposium on Exploration for Rock Engineering, Johannesburg, Volume 1, 1976, pp. 97-106. Bieniawski, Z.T., 1989, "Engineering Rock Mass Classifications", John Wiley and Sons. Brown, E.T., 1981, "Rock Characterization Testing and Monitoring - ISRM Suggested Methods", Pergamon Press, London, England, p. 32. Carter, T.G. (1995). Rock anchors. A review of Rock-Related Factors Controlling Capacity. Seminar on Anchoring in Rock and Soil, University of Toronto. Chappell, B.A., 1987, "Structural Response and Rock Bolting of a Rock Mass", Mining Technology No. 4. PONTIFICIA UNIVERSIDAD CATLICA DEL PER SECCIN INGENIERA DE MINAS CURSO DE ESPECIALIZACIN EN CIERRE DE MINAS Y PASIVOS AMBIENTALES
GerMecRoc_Referencias.doc 4 CIM, 1999. Design and Construction of Tunnel Plugs and Bulkheads Seminar Presented at the CIM Annual General Meeting, Calgary, Alberta, May 2, 1999. Golder, 2000. Rock Mass Classification. Internal document prepared by Golder Associates Ltd. Grimstad, E., Barton, N., 1993, Updating the Q System for NMT, proc. inter. symp. on sprayed concrete modern use of wet mix sprayed concrete for underground support, Fagernes (eds Kompson, Obsahl and Berg), Osslo: Norwegian Concrete Assn. Grimstad, E., Barton, N., Lien, R., Lunde, J., Loset, F., 1986, "Classification of Rock Masses with Respect to tunnel Stability New Experiences with the Q System (in Norwegian)" Geotek nikk, 301.1 - 3.18, Tapir Press. Hoek, E. and Brown, E.T. (1988). The Hoek-Brown Failure Criterion - a 1998 update. In Rock Engineering for Underground Excavations, Proc. 15th Canadian Rock Mech. Symp. pp. 31-38, Toronto: Dept. Civil Engineering, U. of Toronto. Hoek, E., 2000, Rock Mass Classification, Practical Rock Engineering, www.rocscience.com/hoek/Practical RockEngineering.asp. Hoek, E., Brown, E.T., 1980, "Underground Excavations in Rock", Institute of Mining and Metallurgy, London, England. Hoek, E., Carranza-Torres, C., Corkum, B. (2002). Hoek-Brown failure criterion - 2002 edition. Proc. Narms-Tac 2002, Editors Hammah et al., University of Toronto, pp. 267 - 273. Hoek, E., Kaiser, P.K. and Bawden W.F. (1995). Support of Underground Excavations in Hard Rock. Rotterdam, Balkema. Hutchinson, J., Diedricks, M.Sc., 1996, Cabblebolting in Underground Mines, BiTech Publishers Ltd., Richmond, B.C. Kirsten, H.A.D., 1983, "The Combined Q-NATM System for the Design and Specification of Primary Tunnel Support", S. African Tunnelling, No. 6. PONTIFICIA UNIVERSIDAD CATLICA DEL PER SECCIN INGENIERA DE MINAS CURSO DE ESPECIALIZACIN EN CIERRE DE MINAS Y PASIVOS AMBIENTALES
GerMecRoc_Referencias.doc 5 Laubscher, D.H., 1984, "Design Aspects and Effectiveness of Support Systems in Different Mining Conditions", Trans. Inst. Min. Metall. No. 93. Laubscher, D.H., 1990, "A Geomechanics Classification System for the Rating of Rock Mass in Mine Design", Journal of the South African Institute of Mining and Metallurgy, Volume 90, No. 10, October, pp. 257-273. Laubscher, D.H., Page, C.H., 1990, "The Design of Rock Support in High Stress or Weak Rock Environments", presented at the 92nd Annual General Meeting of CIM, Ottawa, May. Milne et al., Rock Mass Characterization for Underground Hardrock Mines. pp. 3-4. http://mining.ubc.ca/rock/publications/Rock%20Mass-can-tun98.fnl-3.PDF MOSHAB, 1997 Geotechnical Considerations in Underground Mines, Guideline Department of Industry and Resources, Government of Western Australia. Priest, S.D., Hudson, J.A., 1976, "Discontinuity Spacing in Rock", Int. Journal of Rock Mech. and Min. Sci. #13. Mecnica de Suelos Craig, R.F., 1997, Soil Mechanics Sixth Addition, Spon Press Taylor & Francis Group, New York. pp 113-115. Golder Associates, 1993, Field Procedures Manual, Golder Associates Ltd., Mississauga pp 108, A3-A11. Golder Associates, Cours Sur La Conception des Barricades dans les Mines Souterraines, Montreal, May 2004. Lerouiel, S. et al, 1996, Geotechnical Characterization of Slope Movements. Proceedings on the Seventh International Symposium on Landslides, Trondheim, Norway, Balkema Rotterdam, Vol. 1, pp 53-74. McCarthy David F., 1998, Essentials of Soil Mechanics and Foundation-Fifth Edition. Prentice-Hall Inc. Upper Saddle River, NJ, pp 147-149. PONTIFICIA UNIVERSIDAD CATLICA DEL PER SECCIN INGENIERA DE MINAS CURSO DE ESPECIALIZACIN EN CIERRE DE MINAS Y PASIVOS AMBIENTALES
GerMecRoc_Referencias.doc 6 Mitchell, R.J. & Markell, A.R., 1973, "Flow sliding in Sensitive Soils", Canadian Geotechnical Journal, 11, 1994, pp 11-31. Seed et al. 2003, Recent Advances in Soil Liquefaction Engineering: A Unified and Consistent Framework, 26th Annual ASCE Los Angelas Geotechnical Spring Seminar, Long Beach California. Seed, H.B., Idriss, I.M., Arango, I. 1983, Evaluation of Liquefaction Performance Using Field Performance Data, Journal of Geotechnical Engineering, ASCE 109(3), pp. 458-481. Tavenas, F.1984, Landslides in Canadian Sensitive Soils, Proceedings on the Fourth International Symposium on Landslides, Toronto, Vol. 1, pp. 141-153. Wang, W. 1979, Some Findings in Soil Liquefaction, Research Report, Water Conservancy and Hydroelectric Power Scientific Institute, Beijing, August.