Holder LINE MATERIAL COMPANY Executive Office Milwaukee 1, Wisconsin CanadaCanadian Line Materials Ltd.Toronto 13 L-M SPHEROLITE LUMINAIRE The L-M Spherolite is a suspension luminaire for all modern street lighting installations. This luminaire is especially recom- mended for use on straight series circuits of 5000 volts or less with lamps up to 10000 lumen series or 500 watt multiple. The luminaire is a concealed light source type. Spherolite hoods are available in a variety of designs to meet all wiring and mounting requirements
for use on brackets, mast arms, or center span. The hood is available as a pendant or side entrance mount, and is furnished for 1J4" mounting as standard, 2" mounting if speci- fied. The use of side entrance hoods provide higher mounting height at the same bracket height. Side entrance hoods are avail- able in two distinct styles, one without a heat insulator, the other with a porcelain heat insulator. The Spherolite reflector can also be furnished for direct attachment to porcelain heads. The hood and reflector is made entirely of aluminum. The alzak processed reflector is fluted to prevent destructive heat concentration on the filament stem of the lamp. Various glass- ware holders are available to meet individual operating require- ments. The luminaire is available with light distributions meet- ing I.E.S. classification for Types I, III, IV, and V and, in addi- tion, a Four Way light pattern for intersection lighting. 1 y Controlite Sr. Luminaire
Side Entrance Hood
L-M CONTROLITE SR. LUMINAIRE The Controlite Sr is an ornamental suspension lumin- aire especially recommended for use on straight series circuits of 5000 volts or less with 4000 to 15000 lumen lamps, and on multiple street lighting circuits with 300 to 750 watt lamps. It is ideal for the efficient lighting of wide boulevards and traffic arteries. This luminaire, of the con- cealed light-source type, offers high efficiency and scientific con- trol of light. It is available for symmetric or assymetric light distribution. The luminaire can be furnished with a side mounted slipfitter hood, with heat insulator, as shown at left, or with a hood for pendant mounting. The hood and housing are cast aluminum protecting an inner reflector of specular alzak. The unit is furnished with a pressure latch glassware holder which provides a constant vertical spring pressure of glassware on the reflector. The diffusing globe furnished with this luminaire is of the self-cleaning diamond mesh design. Light distributions meet I.E.S. specifications for IV and V. M-96