Professional Documents
Culture Documents
2
https://www.honeywellprocess.com/
Honeywell Process Solutions
TNDOC-X244-en-6841A
Notices and Trademarks
While this information is presented in good faith and believed to be accurate,
Honeywell disclaims the implied warranties of merchantability and fitness for a
particular purpose and makes no express warranties except as may be stated in its
written agreement with and for its customers.
In no event is Honeywell liable to anyone for any indirect, special or consequential
damages. The information and specifications in this document are subject to change
without notice.
Honeywell, PlantScape, Experion PKS, and TotalPlant are registered trademarks of
Honeywell International Inc.
Other brand or product names are trademarks of their respective owners.
https://www.honeywellprocess.com/
Hardware components
Cisco IE3000
ethernet switch
CF9 switch
ENIM
EHPM
FTE cable
EHPM FTE
interface
https://www.honeywellprocess.com/
Note: The minimum supported LCN
processor board for ENIM is K4LCN.
The ENIM does not support LCN
processor boards of HMPU, HPK2 and
K2LCN types.
Software media
Media name Media description Media type Contents
EUCN Installation media
Personality & Support Files: &Z1 -
LCN 684
Zip
This media contains
EUCN software
GUS-TPN Software: &Z1, &Z6,
&Z12, Z14 - LCN 684
CD
&Z5 Diagnostic Software Tests Zip
This media contains
EUCN software
TPN HVTS Release CD CD
R684.1-R421.2 Software Change
Notification Collection Media
CD
Utilities and Load Modules
R301.10 (ULM) media Control Firewall Update Tool
CD
Required drivers for
system hardware
component and
different software
packages
EPA Tool
HyperTerminal
Honeywell FTE MUX drivers
PDF Collection media
Product Documentation and
Customer Resource Manual
DVD
EUCN book set in PDF
format
https://www.honeywellprocess.com/
UCN to EUCN Migration
Step No. Task Reference Notes Estimated
completion time
1
Plan for
migration/upgrade from
UCN to EUCN.
EUCN Overview and Planning for
Upgrade Kit Instructions (51195766-
037)
For more information on EUCN,
refer to the following documents:
UCN Planning (UN02-501)
UCN Installation (UN20-500)
HPM Planning (HP02-610)
HPM Installation (HP20-600)
Engineers Reference Manual
(SW09-605)
Process Operations Manual (SW11-
601)
HPM Service Manual (HP13-610)
Contact your local sales and marketing
team to obtain a copy of this
document.
2 days for the first
redundant ENIM
and the first
redundant EHPM
and 4 - 5 hrs for
each subsequent
EHPM or ENIM.
2
Migrate existing software
personalities of UCN to
EUCN.
Customer Release Guide (CRG-684)
and Differences Summary (DF02-
684)
Minimum software release for EUCN is
TPN R684.1.
4 6 hrs.
3
Decommission any UCN
nodes that are not
supported by EUCN.
This is only applicable if you are an
existing UCN system user.
3 5 hrs for each
node.
4
Install FTE switch. FTE Switch used with LCN Cabinet
Upgrade Kit Instructions (51195195-
384)
1 hr.
https://www.honeywellprocess.com/
UCN to EUCN Migration
Step No. Task Reference Notes Estimated
completion time
5
Configure FTE switch. TPN System Installation (SW20-600)
FTE MUX drivers and HyperTerminal are
available on the ULM media.
Switch configuration files are available
on the Honeywell OLS (Online Support)
website:
2 3 hrs.
6
Install Honeywell CF9
switch.
CF9 Ethernet Switch Upgrade Kit
Instructions (51195766-036)
1 hr.
7
Upgrade CF9 firmware to
FF version.
HPM Installation Manual (HP20-600)
Firmware upgrade utility (Control
Firmware Update Tool) is available on
the ULM media.
1 hr.
8
Connect the crossover
cable between the highest
level FTE switches.
If the FTE switch is configured as a split
switch with ports designated as Level 1
or Level 2, connect the Level 1 to Level
2 crossover cables.
30 min.
9
Route FTE cables from the
CF9 Ethernet switches to
the FTE switches.
This establishes a basic network
infrastructure prior to connecting the
ENIM and the EHPM.
30 min.
10
Route the FTE cables from
FTE Switches to NIMs.
NIM to ENIM Upgrade Kit Instructions
(51195195-383)
15 min for each
EUCN node.
11
Route the FTE cables from
CF9 Ethernet Switches to
PMs/APMs/HPMs.
CF9 Ethernet Switch Upgrade Kit
Instructions (51195766-036)
15 min for each
EUCN node.
12
Record the LCN and the
UCN addresses for the
EHPMs and the ENIMs in
the EUCN Configuration
Data Checklist.
EUCN Configuration Data Checklist
Assign IP Addresses and FTE Device
Indexes to the ENIMs and the EHPMs
and CF9 Switch pair and CF9 Switch
ports for the EHPMs in the EUCN
Configuration Data Checklist.
2 4 hrs.
https://www.honeywellprocess.com/
en-US/support/Pages/default.aspx
https://www.honeywellprocess.com/
UCN to EUCN Migration
Step No. Task Reference Notes Estimated
completion time
13
Checkpoint the UCN
nodes.
Customer Release Guide (CRG-684)
30 min.
14
Shutdown the UCN system
to be migrated by
following the standard
node shutdown procedure.
Customer Release Guide (CRG-684)
This is an offline migration.
Note: If you are migrating from TPN
R535 to TPN R684:
1. Perform an online migration of
TPN software personalities from
R5xx to R684.
2. Shutdown the system and upgrade
the hardware.
24 hrs.
3 4 hrs.
15
Upgrade NIM to ENIM. NIM to ENIM Upgrade Kit Instructions
(51195195-383)
1 2 hrs.
16
Upgrade xPM to EHPM. Refer to the following documents:
PM/APM to EHPM (CE Compliant)
Upgrade Kit Instructions (51195766-
034)
PM/APM to EHPM (Non-CE
Compliant) Upgrade Kit Instructions
(51195766-038)
HPM to EHPM Upgrade Kit
Instructions (51195766-035)
1. Perform final checkpoints on the
ENIMs.
2. Reload the ENIMs and wait until
the EHPMs are in the ALIVE state
before loading them.
1 hr each to install
PM/APM to EHPM
(CE Compliant),
PM/APM to EHPM
(Non-CE
Compliant) and
HPM to EHPM
upgrade kits.
This does not
include system
reconfiguration
and startup time.
17
Load the firmware on the
EPNI2 board.
HPM Installation Manual (HP20-600)
Stand-Alone EPA tool is available on
the ULM media.
15 min for each
EPNI2 board.
18
Load the firmware on the
EHPM card.
HPM Installation Manual (HP20-600)
Stand-Alone EPA tool is available on
the ULM media.
15 min for each
EHPM node.
https://www.honeywellprocess.com/
Note: Estimated completion time assumes the best-case conditions being performed by experienced personnel.
For troubleshooting instructions, refer to HPM Service manual (HP13-610).
Support and Other Contacts
United States and Canada
Contact: Honeywell Solution Support Center
Phone: 1-800-822-7673
Facsimile:
Mail: Honeywell TAC, MS L17
1860 W. Rose Garden Lane
Phoenix, AZ, 85027 USA
Europe, Middle East, and Africa (EMEA)
Contact: Honeywell TAC EMEA
Phone: +32-2-728-2345
Facsimile: +32-2-728-2696
Mail: TAC-BE02
Hermes Plaza
Hermeslaan, 1H
B-1831 Diegem, Belgium
Email:
Calls are answered by dispatcher between 6:00 am and 4:00 pm
Mountain Standard Time. Emergency calls outside normal
working hours are received by an answering service and returned
within one hour.
1-973-455-5000
Pacific
Contact: Honeywell Global TAC Pacific
Phone: 1300-364-822 (toll free within Australia)
+61-8-9362-9559 (outside Australia)
Facsimile: +61-8-9362-9564
Mail: Honeywell Limited Australia
5 Kitchener Way
Burswood, WA, 6100, Australia
Email:
India
Contact: Honeywell Global TAC India
Phone: +91-20- 6603-2718/19
1800-233-5051
Facsimile: +91-20- 6603-9800
Mail: Honeywell Automation India Ltd
56 and 57, Hadapsar Industrial Estate
Hadapsar, Pune 411 013, India
Email:
GTAC@honeywell.com
tac-be02@honeywell.com
Global-TAC-India@honeywell.com
https://www.honeywellprocess.com/
Support and Other Contacts
Korea
Contact: Honeywell Global TAC Korea
Phone: +82-80-782-2255 (toll free within Korea)
Facsimile: +82-2-792-9015
Mail: Honeywell Co., Ltd
4F, Sangam IT Tower B4-4 Block
1590, DMC Sangam-dong, Mapo-gu
Seoul, 121-835, Korea
Email:
Peoples Republic of China
Contact: Honeywell Global TAC China
Phone: +86- 21-2219-6888
800-820-0237
400-820-0386
Mail: Honeywell (China) Co., Ltd
33/F, Tower A, City Center, 100 Zunyi Rd.
Shanghai 200051, Peoples Republic of China
Email:
Singapore
Contact: Honeywell Global TAC South East Asia
Phone: +65-6823-2215
Facsimile: +65-6445-3033
Mail: Honeywell Private Limited
Honeywell Building
17, Changi Business Park Central 1
Singapore 486073
Email:
Japan
Contact: Honeywell Global TAC Japan
Facsimile: +81-3-6730-7228
Mail: Honeywell K.K
New Pier Takeshiba, South Tower Building
20th Floor, 1-16-1 Kaigan, Minato-ku
Tokyo 105-0022, Japan
Email:
Elsewhere
Call your nearest Honeywell office
Global-TAC-Korea@honeywell.com
Global-TAC-China@honeywell.com
GTAC-SEA@honeywell.com
Global-TAC-JapanJA25@honeywell.com
https://www.honeywellprocess.com/