You are on page 1of 252
‘opyrig The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All product, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice, 4 Ports 11g Wireless ADSL212+ Router n Q oO 2 2. 2 S z s 3 fe} This equipment has been tested and found to comply with limils for a Class B digital device pursuant to 47 CFR, Part 2 and Part 15 of the Federal Communication Commission (FCC) rules. Operation is subject to the following two conditions 1. This device may not cause harmful interference 2. This device must accept any interference received including interferences that may cause undesired operations. This equipment has been tested and found to comply with the limits of the European Council Directive 99/5/EC on the approximation of the law of the member states relating to EN 300 328 V1.4.1 (2003-04), EN 301 489-1 V1.4.1 (2002-08) and EN 301 489-17 V1.2.1 (2002-08) and EN 60950. FCC & CE Compliance Statement These limits are designed to provide reasonable protection against radio interference in a residential environment. This equipment can generates, uses and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment ON and OFF, the user is encouraged to try to reduce the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connect to Consult a dealer or an experienced technician for assistance Fe CE CAUTION! ‘The Federal Communication Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 4 Ports 11g Wireless ADSL212+ Router i Contents COPYRIGHT. CHAPTER 1 INTRODUCTION. 1.1 Features 1.2 Scope 1.3 Audience. 1.4 Document Structure. 1.5 System Requirement 1.6 Packet Contents, 2 5 6 7 8 9 CHAPTER 2 KNOWING THE 4 PORTS 11G WIRELESS ADSL2/2+ ROUTER. 2.1 Front Pane: 10 2.2 Back Panel: " 2.3 Connection Mechanism: 12 CHAPTER 3 SETTING UP THE TCP/IP IN WINDOWS. 3.4 Windows ME / 98 15 3.2 Windows 2000 16 3.3 Windows XP. 17 3.4 Checking TCPIIP Configuration 18 CHAPTER 4 DEVICE ADMINISTRATION.. 4.4 Login 22 4.2 Setup Wizard 25 4.3 Tools 34 4.3.1 Tools ~ System Commands. 35 4.3.2 Tools ~ Remote Log 37 4.3.3 Tools — User Management 39 4.34 Tools — Update Gateway a 4.3.4.4 Update Gateway Procedure 42 4.35 Tools ~ System Log 44 4.36 Tools ~ Ping Test 45 4.3.6.1 Ping Test Procedure 46 4.3.7 Tools ATM Test 47 4.4 Advanced 48 4.4.1 Advanced — Advanced. 49 4.4.2 Advanced ~ SNMP 51 4.4.3 Advanced ~ UPnP 53 4 Ports 11g Wireless ADSL2I2* Router i

You might also like