Professional Documents
Culture Documents
APRIL 16th
PRICE LIST
2012
Flomatic is proud to state that most valves are in full compliance with the Buy American
provisions of the ARRA. They are designed, manufactured, serviced, and supported out
of our facility in Glens Falls, New York, USA.
Complete unleaded valve product line that complies with all low lead laws —
Reduction of Lead in Drinking Water Act.
UNLEADED VALVES
G a t e s Va l v e s • C h e c k Va l v e s • C o n t r o l Va l v e s • B a l l c h e c k Va l v e s • B u t t e r f l y Va l v e s
LOOK AT WHAT’S NEW!
IN
STOCK
NOW!
• Composite Break-off Plug
The new break-off plug is made from high quality NSF® approved
engineered composite material. It will allow users to easily field cut at
marked grooves the standard break-off plug for various size valves.
800.833.2040
See Page:11
WHAT’S NEW AT
IN
STOCK
• New Larger Control Valve Sizes NOW!
The new Model C² is one of the most flow efficient control valves in its class on the
market according to independent testing. Its unique body design allows for high
flow coefficient, Cv* among the leading competitors. Larger sizes NOW available
16”, 20”, 24”, 30” and 36”.
See Page: 22-23
* (Cv value=flow through valve in gallons per minute at 1 PSI drop)
Most products in this catalog have been tested and certified by IAPMO, an ANSI
accredited third party to comply with the laws. Flomatic introduced the industries first
unleaded bronze check valves, in 1996, which have been recognized as an acceptable
material for “lead free*”.
Flomatic Corp.
* The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of Product Certification by:
lead by weight.
800.833.2040
This product
complies with the
California and Vermont
Low Lead
Requirements
Flomatic has received certification for its stainless steel wafer style check valves
Model 812X (see page 9) and pressure reducing C150E (see page 25). During 2012
other product certifications will be added. Please check our website for updates at
www.flomatic.com.
IN
STOCK
• New Stainless Steel Seat for 2” 80DI & 80MDI NOW!
This new seat allows for smooth movement of the guide legs and provides longer
corrosion resistant service life. This new 2” model 80DI is longer and allows for an
optional break off plug to be installed. It increases performance, reliability and
strength of the valve.
See Page: 5
IRRIGATION
HIGH TEMP
CORROSIVE
PRESSURE
ABRASIVE
VELOCITY
FIBROUS
POTABLE
STRINGY
VISCOUS
SLURRY
WATER
WATER
WASTE
HIGH
HIGH
Backflow Preventers DCVE, PVB, RPZE & RPZE II 2,30,31
3 u u
Gate Valves NRS & OSY 533 • u • u • • • u
Quarter Turn Ball Valves 605E & 601E 432 u u u • u • • u
7,82 u u
800.833.2040
TABLE OF CONTENTS
Unleaded Ball Valves Page
Air Release/ Vacuum Page (Quarter Turn) Unleaded Bronze Page
Miniair®, Maxiair®, Wellair® 28 605, 601 32 Backflow Preventers 30-33
Comboair , Sewair Series 28,29
® ®
Pressure Vacuum Breaker 31
Backflush 29 Butterfly Valves Page Ball Valves (Quarter Turn) 32
Auto-Drain - Model 70 3 Azure® AWWA C504 15 Y-Strainers 20,30
®
Auto-Vac® - Model 77 13 Kwik-Close 15
Sylax® Wafer & Lug Style 16 Cast Iron Page
Automatic Control Valve Page Sylax® Electric Actuated 17 Air Gap Adapter 32
Altitude – Air Release/Vacuum 28-29
C201, CF201, Break Off Plugs 9 Ball Check 13
C205, CF205 22 Foot Valve 18,19
Back Pressure – Check Valves Page Globe Style Silent Check 10
C301, CF301 22 Ball Check Strainer 20
Cycle Gard® – CB152E, 508, 408,4082,208,208T,208B 13 Swing Check 11,12
C3100, CI, CN Series, C152E 26,27 Double Check Wafer Check 9,10
Float Valve DCVE 31
C701, CF701 23 Globe Style Silent Check Ductile Iron Page
Flow Control 402BT, 402BTR, 402S6 10
Backflow Preventers 30,31
C901, CF901 23 Hydraulic Check
Check Valves 5-7
Hydraulic Check C1001, CF1001 23
Control Valve 22-23
C1001, CF1001 23
Drain Back 3
Pressure Reducing Galvanized Page
Submersible Check
C101, CF101, C150E 22,25 Strainers 20,30
80E Series, 100E, 100XLE, 2,3
Pressure Relief
80DI, 80DIVFD. 80DI8R,
C401, CF401 22 82DP Series, 5,6 Plastic Page
Pump Control 100MP 14 Air Gap Adapter 32
C601, CF601 23 Swing Check Ball Check 13
Solenoid Actuated 78A, 78, 90/92, 93 Series 11 In-line Check 14
C801-2, CF801-2 23 745, 745BF, 745PI, 745BFPI 12 Insert Check 14
Surge Arrestor Foot Valves 18
C501, CF501 23 Wafer & SS Check Strainers 20
895, 848, 888, 888S6 812X Submersible Check 13
Backflow Preventers Page 816, 816F, 816HS Series 9,10
Air Gap Adapter 32 Stainless Steel Page
Double Check Valve, DCVE 31 Foot Valves Page Foot Valve 18-19
Reduced Pressure Zone 60SE, 333 Series, 190 Series,
800.833.2040
Strainers 18
RPZE, RPZE II, RPZSS II 30 124P, 104 Series, 18 Submersible Check 8
Pressure Vacuum Breaker 357, 63, 812 Series, 19 Wafer Check 9
PVB 31 302BT Series, 19
Test Kits, Test Cocks 32 Series 16, 16FL 20 Unleaded Bronze Page
Single Detector Check 30 Foot Valves 18
Atmospheric Vacuum Breaker Gate Valves Page In-line Check 2,3
AVB 31 NRS AWWA C515, C509 33 Strainers 20
Carbonated Beverage Backflow Prev. OS&Y AWWA C509 33 Submersible Check 2,3
CB20 31
Hose Connection Vacuum Breaker Strainers Page
HB8 31 6P, 46 Series, 6SE 20
Dual Check Valve, 8080E, 8080SS 31 Y Strainers 20
Dual Check Valve w/ Atmos. Vent
8200 31 Sales Agents by State 34
80E-ENVIRO CHECK® body is cast from an unleaded alloy 80ME-ENVIRO CHECK® body is cast from an unleaded alloy. 80AE-ENVIRO CHECK® body is cast from an unleaded alloy.
with threaded female x female connection. This valve features a This valve features a non-spin poppet, NITRILE (Buna-N) seal and This valve features a non-spin acetal (1/2"- 2") or unleaded bronze
non-spin acetal (1/2"- 2") or unleaded bronze (21/2"- 4") stainless steel spring. (21/2"- 4") poppet, NITRILE (Buna-N) seal and stainless steel
poppet, NITRILE (Buna-N) seal and stainless steel spring. Temp Max: 180°F (80C) Pressure Max: 400 PSI spring with a 1/8" drilled and tapped hole inlet side.
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
VALVES HAVE LESS THAN 1 PSI CRACKING PRESSURE 11/4 ” 7984E 1.6 36 $ 76.54
FOR HIGHER CRACKING PRESSURE SEE PAGE 9 * Unleaded bronze poppet.
®
®
80BE-ENVIRO CHECK body is cast from an unleaded alloy 80CE-ENVIRO CHECK® body is cast from an unleaded alloy. 80XBE-ENVIRO CHECK body is cast from an unleaded
Control Center for Submersible Pump installations with four alloy with two 1/4"
tapped holes on outlet side for pressure switch
with two drilled and tapped holes; 1/8" inlet side and 1/4" outlet
side. This valve features a non-spin acetal (3/4"- 2 ") or unleaded tappings; one 1/8" inlet side, two 1/4" outlet sides, one 1/8"outlet and gauge. This valve features a non-spin acetal poppet, NITRILE
bronze (2 1/2"- 4") poppet, NITRILE (Buna-N) seal and stainless side with brass plug. This valve features a non-spin acetal poppet, (Buna-N) seal and stainless steel spring. For diaphragm tanks.
steel spring. NITRILE (Buna-N) seal and stainless steel spring.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7961E 1.2 50 $ 61.74
SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/" 4050E .6 100 $ 51.30 1" 4061E 1.2 50 $ 61.74 11/4 " 7963E 1.6 36 $ 79.93
11/4 " 4062E 1.8 36 $ 79.96
4
AVAILABLE ON ALL
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7971E 1 50 $ 61.60
VALVE OPTION:
www.flomatic.com 2
100E Discount Code A 100ME Discount Code A 100XLE Discount Code A
1" 4201E 1.1 50 $ 43.53 1"M x 1"F 4071E .7 50 $ 44.52 1"M x 1"F 4201XLE 1 36 $ 54.79
1"** 4201LE** 1.2 50 $ 46.88 11/4"M x 1"F 4221E 1.1 50 $ 42.89 11/4"M x 11/4"F 4242XLE 1.5 36 $ 70.54
11/4 " 4202E 1.4 36 $ 59.66 11/4 "M x 1"F* 4221LE* 1.4 50 $ 45.48
11/4 "M x 11/4 "F 4242E 1.5 50 $ 56.99
11/2 "M x 11/4 "F 4223E 1.5 36 $ 70.90
Consult factory for bulk case quantities.
Consult factory for bulk case quantities. See page 12 for stainless steel version.
100DPE A
* Same body as 80E
** Extra long threads,for use with PVC pipe. Consult factory for bulk case quantities.
Note: 1” 100E not recommended for PVC drop pipe. * Longer threads Discount Code
See 80E or 100LE.
FLOMATIC IS AN ACTIVE
MEMBER IN THESE
INDUSTRY
ASSOCIATIONS www.watersystemscouncil.org
www.ngwa.org
100DPE-ENVIRO CHECK® body. Dual purpose check valve,
stainless steel spring and non-spin acetal poppet. Male and female
threads on both ends. NITRILE (Buna-N) seal.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
Complies with new Federal lead free law
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" x 11/4 " 4231E 1.1 50 $ 54.44
80HTE A 70 A
Consult factory for bulk case quantities.
80HTE-ENVIRO CHECK® body with threaded female x 70- Auto-Drain- This 1” valve is available in bronze, stainless
female connections. Features a high temperature stainless steel steel, and PVC. All internal parts are engineered composite, with
poppet and VITON seal with stainless steel spring. Ideal for hot a stainless steel disc and resilient seat.
water applications. Temp Max: 180°F (80C) Pressure Max: 400 PSI
Temp Max: 300°F (150C) Pressure Max: 100 PSI
5 PSI – open pressure
SIZE PART NO. WGT. LIST PRICE
" 5118HTE .2 $ 71.83
MATERIAL PART NO. CASE QTY. LIST PRICE
1/
4
3/
8" 5159HTE .2 $ 72.21 PVC 4501PX 12 $ 58.22
1/ " 4029HTE .2 $ 54.63
2 Bronze 4501X 12 $ 68.91
3/ " 4030HTE .8 $ 76.25
4 Stainless Steel 4501SSX 12 $ 71.96
1" 4031HTE 1.4 $ 74.04
1 /4 "
1 4032HTE 1.7 $ 101.87 10 PSI – open pressure
11/2 " 4033HTE 2.7 $ 148.82
2" 4034HTE 4.0
MATERIAL PART NO. CASE QTY. LIST PRICE
$ 201.01
21/2" 4035HTE 6.5 $ 674.90 PVC 4501P 12 $ 58.22
www.flomatic.com
3" 4036HTE 13.0 $ 799.08 Bronze 4501 12 $ 68.91
4" 4037HTE 25.0 $ 1,453.33 Stainless Steel 4501SS 12 $ 71.96
• SELF CLEANING
SEAT
• ANTI-SPIN POPPET ®
FLOMATIC
Industry proven design and millions
in operation, the patented WCR ®
(Warranted Check Reliability) poppet
has evolved from Flomatic’s pioneering
ENVIRO CHECK® VALVES 800.833.2040
UNLEADED VALVES
NOTE:
Refer to local codes and regulations.
Consult factory for deep set pumps and
valve installations for material and valve
tensile strength and use with VFD pumps.
See www.flomatic.com for details.
W!
• New pressure rating on4”-8” sizes
100MDI A
80DI- High strength epoxy coated ductile iron body, disc and 80DI8R-8 Round Threads - High strength epoxy coated
follower with threaded female x female connection. Features a ductile iron body, disc and follower with threaded female x female
NITRILE (Buna-N) seal, stainless steel spring fasteners, and ductile 8 round connection. Features a NITRILE (Buna-N) seal, stainless Discount Code
iron poppet. Designed for vertical applications. steel spring fasteners, and ductile iron poppet. Designed for verti-
Note: 1" through 1-1/2'' features acetal poppet. cal applications.
Temp Max: 180°F (80C) Pressure Max: 400 PSI: 1”-3” Temp Max: 180°F (80C) Pressure Max: 400 PSI: 3”
600 PSI: 4”-8 600 PSI: 4”-8
SIZE PART NO. WGT. LIST PRICE
3" 7938-1 15 $ 469.74
4" 7939-1 25 $ 723.32
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4031DI 2 50 $ 29.88 5" 4088-1 46 $ 1,343.12
11/4 " 4032DI 1 36 $ 41.60 6" 4089-1 66 $ 1,667.57
11/2" 4033DI 2 25 $ 56.90 8" 4090-1 93 $ 2,821.17
2"* 7937 3 16 $ 115.00 100MDI- High strength epoxy coated ductile iron valve features
21/2" 7936 9 1 $ 252.30 To order Model 80DI8R with break-off plug, add “PLG” to part male threaded inlet and female threaded outlet. Ideal for
3" 7938 15 5 $ 375.79
number for 3"-8" and add $75.00 to list price of valve. submersible pumps.
4" 7939 25 4 $ 578.66 $50.00 added for composite plug installed and add pplg to end Temp Max: 180°F (80C) Pressure Max: 400PSI
5" 4088 46 $ 1,074.29
80DI-VFD A
of part number.
6" 4089 66 $ 1,334.88
SIZE PART NO. WGT. LIST PRICE
11/4 "M x 1"F 4221LDI 1 $ 25.07
8" 4090 93 $ 2,256.73
Discount Code
11/4 "M x 11/4 "F 4242DI* 1.3 $ 31.57
To order Model 80DI with break-off plug, add “PLG” to part 11/4 "M x 11/4 "F 4242LDI** 1.4 $ 36.32
W!
BREAK-OFF PLUG A
*Consult factory for availability. **Longer threads.
NE
80DIX A
Temp Max: 180°F (80C) Pressure Max: 400 PSI: 3”
600 PSI: 4”-8 BREAK-OFF PLUG- Stainless steel construction. Threaded 3/8"
Discount Code to install into valve. When broken off, riser pipe drains.
SIZE PART NO. WGT. LIST PRICE
2" 7937VFD 3.2 $ 116.68
Temp Max: 180°F (80C) Pressure Max: 400 PSI
2 1⁄2" 7936VFD 9.5 $ 290.14 SIZE PART NO. WGT. LIST PRICE
3" 7938VFD 16 $ 432.17 2"* 76098-2 .17 $ 61.52
4" 7939VFD 47 $ 665.45 2 1⁄ 2" 76098-3 .19 $ 63.29
5" 4088VFD 49 $ 1,235.43 3" 76098-6 .2 $ 63.74
6" 4089VFD 70 $ 1,535.11 4" 76098-7 .25 $ 63.96
8" 4090VFD 98.5 $ 2,595.24 5"–8" 76098 .3 $ 63.96
10" & 12" 76098-11 .45 $ 76.88
COMPOSITE
double-guided ductile iron poppet. Designed for vertical and hori- SEE PAGE 7 FOR ILLUSTRATION.
BREAK-OFF PLUG A
zontal applications. SIZE PART NO. FIRST SHIP DATE
Temp Max: 180°F (80C) Pressure Max: 400 PSI 2" 7937VFD June 2012
2 1⁄2" 7936VFD 2012
Discount Code
3" 7938VFD May 2012
SIZE PART NO. WGT. LIST PRICE
3" 7938DIX 13 $ 300.41
4" 7939VFD Completed
4"* 7939DIX* 17 $ 468.91
5" 4088VFD 2013
W!
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
6" 4089T 46 $ 2,621.30
SIZE PART NO. WGT. LIST PRICE
2"M x 2"F 4084 4 6 $ 153.93 2" 7937CL 4 $ 225.20
10" 4091T 155 $ 5,754.00 3"M x 3"F 4083 8 5 $ 292.81 3" 7938CL 5 $ 311.83
4"M x 4"F 4077 14 4 $ 453.77 4" 7939CL 8 $ 369.64
5"M x 5"F 4075 23 $ 688.88 5" 4088CL 14 $ 690.91
Patented Dual Poppet Design 6"M x 5"F 4087 48 $ 786.67 6" 4089CL 35 $ 1,426.10
6"M x 6"F* 4081* 40 $ 834.65
Reduces Headloss by 60% 80MDICL- Ductile iron check valve uses Certainteed’s patented
To order Model 80MDI with break-off plug, add “PLG” to part groove lock type pipe connection on outlet end, and male pipe
number for 4"-6" and add $75.00 to list price of valve. thread for the inlet connection. Materials are the same as the
$50.00 added for composite plug installed and add pplg to end 80DICL.
of part number.
SIZE PART NO. WGT. LIST PRICE
2" 7937MCL 4 $ 229.56
Sealing Disc
No “O”-Rings
Certa-Lok™ is a registered trademark with Certainteed
Corporation.
Note: Reduce ported poppet one size smaller.
Also available in all 316SS, Model 80S6CL.
See Page 8.
™
–
80DIA- Standard high strength epoxy coated ductile iron body 80DIB- Standard high strength epoxy coated ductile iron body
with 1/8" tapped hole on inlet side. with 1/8" tapped hole on inlet side and 1/4" tapped hole on
Note: 1" through 11/2" features acetal poppet. outlet side.
Temp Max: 180°F (80C) Pressure Max: 400 PSI Note: 1" through 11/2" features acetal poppet.
SIZE PART NO. WGT. CASE QTY. LIST PRICE
Temp Max: 180°F (80C) Pressure Max: 400 PSI
www.flomatic.com
for Flomatic product spec sheets.
3 75 3 75 1-1/2 40 10 3
4 100 4 100 2 50 10 3
BEFORE AFTER 5 125 5 125 2/1/2 65 10 3
RISER PIPE
6 150 5 125 3 80 4 1.2
8 200 5 125 4 100 4 1.2
10 &12 250 8-1/2 206 5 125 4 1.2
Stainless steel and composite material
www.flomatic.com 7
100XLSS Discount Code A 100MSS Discount Code A 80SS/100SS Discount Code A
100XLSS - STAINLESS STEEL body is cast from 303 stainless 100MSS- All 303 stainless steel body. Features a high strength 80SS/100SS - All 303 stainless steel one piece body. Stainless
steel. Hex shaped for easy wrenching, this valve features a acetal poppet, stainless steel spring and NITRILE (Buna-N) seal. steel spring and Buna-N seal. Threaded female x female connection.
non-spin acetal poppet, NITRILE (Buna-N) seal and stainless steel Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 400 PSI
spring. Features extra long threads for special bell end PVC pipe. SIZE PART NO. CASE QTY. LIST PRICE
"M x 1/2"F** 4219SS** 100
STAINLESS STEEL CHECK VALVES 800.833.2040
$ 81.94
SIZE PART NO. CASE QTY. LIST PRICE
Temp Max: 180°F (80C) Pressure Max: 400 PSI 1/
1"* 4201SS2* 50 $ 46.68
2
3/ "M x 3/ "F** 4218SS** 100 $ 88.64
1" 4031SS2 50 $ 48.52
4 4
80SSC A
Discount Code
80SSB- body is all 303 stainless steel one piece body with two
drilled and tapped holes; 1/8" inlet side and 1/4 " outlet side.
80SS WITH A TAPS - All 303 stainless steel one piece body. 80SSC- All 303 stainless steel body construction. Control Center
Temp Max: 180°F (80C) Pressure Max: 400 PSI for Submersible Pump installations with four tappings; one 1/8"
This valve features a non-spin acetal poppet, NITRILE (Buna-N) seal
and stainless steel spring with a 1/8" drilled and tapped hole inlet side. SIZE PART NO. WGT. CASE QTY. LIST PRICE inlet side, two 1/4 " outlet sides, one 1/8" outlet side with plug.
1" 4051SS2 1 50 $ 77.07 Temp Max: 180°F (80C) Pressure Max: 400 PSI
11/4 " 4052SS2 1.5 36 $ 94.82
Temp Max: 180°F (80C) Pressure Max: 400 PSI
11/2" 4053SS2 2.3 25 $ 123.89
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4061SS2 1.2 50 $ 82.21
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4041SS2 1.2 50 $ 69.33 2" 4054SS2 2.9 16 $ 190.37
11/4 " 4062SS2 1.8 36 $ 102.55
11/4 " 4042SS2 1.5 36 $ 96.11
80S6CL A
11/2" 4043SS2 2.4 25 $ 118.44
80SSB with 1/4" Tapped Holes on Both Ends
2" 4044SS2 3 16 $ 187.53 SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7971SS2 1 50 $ 77.07
Discount Code
80SSA with a 1/4 " Tapped Hole on the Inlet Side 11/4 " 7972SS2 1.5 36 $ 94.82
11/2 " 7973SS2 2.3 25 $ 123.89
2" 7974SS2 2.9 16 $ 190.37
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7981SS2 1.2 50 $ 69.33
80S6 A
11/4 ” 7983SS2 1.5 36 $ 96.11
Discount Code
80SSXA with a 1/4 " Tapped Hole on the Outlet Side
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7982SS2 1.2 50 $ 69.33
11/4 ” 7984SS2 1.6 36 $ 96.11
80SSXB A
80S6CL- Stainless steel check valve incorporates Certainteed’s
patented groove lock type pipe connections called Certa-Lok™.
Discount Code Stainless steel inside and out including poppet assembly. High
strength stainless steel body and spring with (Buna-N) seal.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE
80S6- All 316 stainless steel threaded check valve body. 2" 7937S6CL 4 $ 643.08
Stainless steel spring, poppet and VITON seal. 3" 7938S6CL 5 $ 810.72
Temp Max: 400°F (200C) Pressure Max: 400 PSI 4" 7939S6CL 8 $ 889.64
6" 4089S6CL 35 $ 3,399.00
SIZE PART NO. WGT. LIST PRICE
1" 4031S6 1.1 $ 84.66
11/4" 4032S6 1.4 $ 125.13
80S6MCL- Stainless steel check valve uses Certainteed’s
11/2 " 4033S6 2.7 $ 164.00
patented groove lock type pipe connection on outlet end, and
80SSXB body is alll 303 stainless steel one piece body with two
2" 4034S6 4.0 $ 243.58
male pipe thread for the inlet connection. Materials are the
1/4 " tapped holes on outlet side for pressure switch and gauge.
same as the 80S6CL.
3" 7938S6 10 $ 851.92
2" 7937S6MCL 4 $ 669.50
This valve features a non-spin acetal poppet, NITRILE (Buna-N)
4" 7939S6 25 $ 1,290.59
3" 7938S6MCL 5 $ 817.82
seal and stainless steel spring. For diaphragm tanks.
6" 4089S6 65 $ 4,041.72
4" 7939S6MCL 8 $ 898.16
Temp Max: 180°F (80C) Pressure Max: 400 PSI
8" 4090XSS 90 $ 6,572.43
6" 4089S6MCL 35 $ 3,456.68
10" 4091XSS 170 $11,618.40
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7961SS2 1.2 50 $ 82.21 Certa-Lok™ is a registered trademark with Certainteed Corporation.
11/4 " 7963SS2 1.6 36 $ 102.55
To order Model 80S6 with break-off plug, add “PLG” to part number Note: Poppet one size smaller.
for 3”- 10” and add $75.00 to list price on valve above.
$50.00 added for composite plug installed and add pplg to end of part #.
8
HOW TO ORDER 812X Discount Code B
WARD VALVE
816FC B 816HS B
8" 2432X 64 $ 5,400.29
Discount Code Discount Code
*Consult factory for temp. & pressure rating. **230 PSI Max
Consult factory for rubber seating on 11⁄2”-4” valves
816FC- Same as 816 with adjustable spring optional tension. 816HS- Same body as Model 816 witih heavy spring for higher
Consult factory for pricing and availability. cracking pressure.
816FL B
SIZE PART NO. CRACKING PRESSURE LIST PRICE
Discount Code 1” YV001110107-08 8 PSI $297.70
1” YV001110107-10 10 PSI $297.70
1” YV001110107-20 20 PSI $297.70
812XT- All 316 stainless steel, threaded 3 piece check valve and
1” YV001110107-30 30 PSI $297.70
body. Metal to metal seating, teflon O-ring. 1 1/2"–8" available
with NITRILE (Buna-N) or VITON seal, add 10% to list price. 2"–6"
Consult factory for pricing and other end connections and available with socket weld connection, add 25% to list.
body material options.
Temp Max: Metal Seating only 400°F (200C)*
816 B
*Note: the last 2 digits are the weight of the spring. Pressure Max: 300 PSI*
Discount Code SIZE PART NO. WGT. LIST PRICE
1/
2" 2420XT .9 $ 124.80
3/ " 2421XT 1.5 $ 144.77
4
(with no flanges)
1/
4" YV2501-X-0100 $ 182.01 $ 159.63
3/
8" YV3751-X-0100 $ 182.01 $ 159.63
1/ " YV5001-X-0100 $ 189.88 $ 159.63
2
3/ " YV7501-X-0100 $ 241.44 $ 201.83
SIZE PART NO. WGT. LIST PRICE
4
402S6/402S6T B
* Available Only In 125#.
CHECK VALVES 800.833.2040
888/888R- New patented design. Cast iron body with epoxy SPLIT DISC®- Cast iron body with epoxy coating and split disc
coating. Wafer connection ANSI 125/250. Metal to metal seating. design. (Model 895 SS-Disc and Model 848 Bronze-Disc) Wafer
For drip-tight sealing use rubber sealing connection ANSI 125 2”-12” EPDM, 14”-24” NITRILE (Buna-N) ,
NSF/ANSI 61-2010 certified by IAPMO R&T. PTFE bearing. Stainless steel spring hinge pin. Lifting ring std. above 4".
For 888ST add ST to end of part number and 25% for Temp Max: 180°F (80C) Pressure Max: 200 PSI
stainless steel trim. SIZE 895 PART NO. WGT. LIST PRICE
2" 3000 3 $ 148.00
402SS/402SSR- 316 stainless steel body. Flanged connection Temp Max: 180°F (80C)
21/2 " 3001 4 $ 173.00
ANSI B16.1, class 125. Metal to metal seating with stainless steel Pressure Max: 200 PSI ANSI 125, 400 PSI: ANSI 250
3" 3002 7 $ 186.00
spring.
4" 3003 8 $ 239.00
SIZE PART NO. WGT. LIST PRICE
2" 2434 5 $ 189.00
SIZE PART NO. WGT. LIST PRICE
8" 2245SS 120 $ 3,629.68 5" 3004 13 $ 364.00
21/2 " 2432 7 $ 206.00
12" 2248SS 330 $11,882.29 6" 3005 18 $ 366.00
3" 2435 11 $ 212.00
14" 2249SS 410 $ POA 8" 3006 21 $ 565.00
4" 2436 18 $ 250.00
18" 2251SS 800 $ POA 10" 3007 49 $ 832.00
5" 2433 25 $ 445.00
888S6/888S6R B
12" 3008 75 $ 1,078.00
6" 2437 36 $ 518.00
Discount Code 8" 2438 80 $ 925.00
8"** 2438-2** 85 $ 1,154.00 SIZE 848 PART NO. WGT. LIST PRICE
10"* 2439* 129 $ 1,453.00 14" 2509 120 $ 2,917.00
16" 2510 170 $ 4,888.00
18" 2511 180 $ 5,785.00
20" 2512 250 $ 7,807.00
888R-Rubber seal drip-tight
SIZE PART NO. WGT. LIST PRICE 24" 2513 360 $ 11,227.00
2" 2434R 5 $ 207.90
21/2 " 2432R 7 $ 226.60
Consult Factory for larger sizes up to 48”.
W!
NE
90LS/92LS*- Cast iron body with epoxy primer. Meets AWWA 90LW/92LW- Cast iron body with epoxy primer. Meets AWWA 90CS/92CS- Cast iron body with epoxy primer. Meets
C508 specifications. Flanged connection ANSI B16.1, class 125. C508 specifications. Flanged connection ANSI B16.1, class 125. AWWA C508 specifications. Flanged connection ANSI B16.1, class 125.
Bronze trim with stainless steel shaft. Metal to metal or NITRILE Bronze trim with stainless steel shaft. Metal to metal or NITRILE Bronze trim with stainless steel shaft. Metal to metal or NITRILE
(Buna-N) seal (Please specify) Features external lever and spring. (Buna-N) seal (Please specify) Features external lever and weight. (Buna-N) seal (Please specify)Features external lever and spring.
Temp Max: 180°F (80C) sealed end cushion closure system for adjustable rate of valve closure.
Temp Max: 180°F (80C)
Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30" Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30" Temp Max: 180°F (80C)
For vertical installation add “V” to part number. For vertical installation add “V” to part number. Pressure Max: 200 PSI: 3"-12", 150 PSI: 14"-30"
For vertical installation add “V” to part number.
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
2" 2704LS 46 $ 1,440.00 2" 2704LW 41 $ 1,440.00
SIZE PART NO. WGT. LIST PRICE
3" 2706LS 72 $ 1,560.00 3" 2706LW 71 $ 1,560.00 2” 2704CS 47 $ 2,500.00
4"* 3707LS* 119 $ 1,550.00 4"* 3707LW* 125 $ 1,550.00 3" 2706CS 98 $ 3,030.00
6"* 3709LS* 205 $ 2,050.00 6"* 3709LW* 224 $ 2,050.00 4"* 3707CS* 195 $ 3,412.00
8"* 3710LS* 359 $ 3,060.00 8"* 3710LW* 401 $ 3,060.00 6"* 3709CS* 325 $ 3,945.00
8"** 3710LS-18 339 $ 3,555.00 8"** 3710LW-18 380 $ 3,555.00 8"* 3710CS* 455 $ 5,039.00
10" 2711LS 537 $ 6,368.00 10" 2711LW 600 $ 6,368.00 8"** 3710CS-18 435 $ 5,489.00
12" 2712LS 748 $ 9,130.00 12" 2712LW 843 $ 9,130.00 10" 2711CS 780 $ 8,425.00
14" 2714LS 1165 $ 13,365.00 14" 2714LW 1323 $ 13,365.00 12" 2712CS 1073 $ 12,914.00
16" 2716LS 1645 $ 17,510.00 16" 2716LW 1875 $ 17,510.00 14" 2714CS 1495 $ 13,812.00
18" 2718LS 1860 $ 24,720.00 18" 2718LW 2110 $ 24,720.00 16" 2716CS 2119 $ 19,555.00
20" 2720LS 2495 $ 29,252.00 20" 2720LW 2841 $ 29,252.00 18" 2718CS 2386 $ 26,766.00
24" 2724LS 3440 $ 40,427.00 24" 2724LW 3927 $ 40,427.00 20" 2720CS 3211 $ 29,862.00
30" 2730LS 4975 $ POA 30" 2730LW 5693 $ POA 24" 2724CS 4440 $ 42,000.00
30" 2730CS 4975 $ POA
** Short Body 18” Face to Face. ** Short Body 18” Face to Face.
** Short Body 18” Face to Face.
Consult factory for
Add “S” to end of part number for Stainless Steel fasteners. 10% mark up.
W!
NE
208- Cast iron body with epoxy coating and clean-out port. 408PRX & 4082 PRX- Model 408 ball check valve with a 208T- Corrosion resistant PVC body. Threaded female x female
Threaded female x female connection. Features NITRILE (Buna-N) proximity switch. connection. NITRILE (Buna-N) self-cleaning ball E-Z access port
“Sinking Ball”. with NITRILE (Buna-N) seal. Also available with socket
Temp Max: 180°F (80C) Pressure Max: 150 PSI weld–change part number from “T” to “S”–same pricing.
Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE Temp Max: 150°F (65C) Pressure Max: 100 PSI
3"* 2144–2PRX* 45 $ 1045.00
SIZE PART NO. WGT. LIST PRICE
11/4" 2141 4.5 $ 91.00 4"* 2145–2PRX* 62 $ 1199.00
SIZE PART NO. WGT. LIST PRICE
11/2" 2142-0 9.5 $ 117.00 1" 2131T 1 $ 46.00
5" 2143PRX 90 $ 1,947.00
2" 2142 9 $ 117.00 11/4" 2132T 1 $ 47.00
6" 2146PRX 102 $ 2,136.00
11/2" 2133T 2 $ 73.00
6"* 2146-2PRX* 122 *$ 1,896.00
2" 2134T 2 $ 73.00
8" 2147PRX 218 $ 3,380.00
10" 2148PRX 355 $ 7,368.00 Note: For BSPP threads, change part number from “T” to “P”.
12" 2149PRX 624 $10,406.73
14" 2150PRX 882 $15,359.73
NOT FOR GROUND BURIAL.
208B B
*New 4082 model meets AWWA C508 flange to flange lay lengths,
OPTIONAL FLOATING BALL and are ductile iron. Discount Code
MODEL 901
100MP- High-strength Noryl GTX 830 Body with NITRILE
®
901- Non-corrosive acetal body and guide. Insert connection.
(Buna-N) seal and polypropylene follower. Threaded male x Features NITRILE (Buna-N) seal and stainless steel spring.
female connection. Temp Max: 180°F (80C) Pressure Max: 150 PSI
Temp Max: 150°F (65C) Pressure Max: 300 PSI
SIZE PART NO. WGT. LIST PRICE
SIZE PART NO. CASE QTY. LIST PRICE 3/"
8 2011 .1 $ 9.00
11/4"M x 1"F 4221MP 49 $ 19.00 1/"
2 2000 .18 $ 9.50
11/4"M x 11/4"F 4242MP 49 $ 24.00 3/ "
4 2001 .35 $ 11.00
1" 2030 .5 $ 16.50
VISIT
Note: For BSP and BSPP threads CONSULT FACTORY.
WATER METER
OUR WEB
FLOMATIC VALVES
IS AN ACTIVE
SITE AT
PLASTIC CHECK VALVES 800.833.2040
MEMBER IN THESE
INDUSTRY
www.awwa.org
ASSOCIATIONS
AND OTHERS www.flomatic.com
Updated Daily!
www.flomatic.com
AZURE B AZURE® B
AWWA C504: ®
Municipal Water & Waste Water
• Proof of design
Discount Code Discount Code
• Metal certification
upon request.
• V-type packing MODEL 45 (Gear Operated) - Ductile iron flanged body. MODEL 45 (Lever Operated) - Cast ductile iron flanged
• Seat Buna-N
ASTM A536 ductile iron disc with stainless type 316 steel edge. body. ASTM A536 Cast ductile iron disc with stainless type 316
Seat, standard NBR (EPDMoptional)vulcanized.Designed to edge. Seat, standard NBR (EPDM optional) bonded and
AWWA standard C504,class150B. Electric/pneumatic actuation vulcanized.Designed to AWWA standard C504, class 150B.
316SS edge
Working Temp: Max+180°F (82C) Pressure Max: 200 PSI
SIZE PART NO. WGT. LIST PRICE
(Ductile Iron Disc) WITH GEAR SIZE PART NO. LIST PRICE
3" 450100060 43 $ 450.00
WITH LEVER
KWIK-CLOSE® B
12" 450000120 261
AZURE®BUTTERFLY B
$ 1,893.00
14" 450000140 380 $ 2,600.00
w/ACTUATOR
Discount Code
16" 450000160 414
Discount Code
$ 3,468.00
18" 450000180 532 $ 3,700.00
20" 450000200 653 $ 4,600.00
24" 450000240 739 $ 7,200.00
www.flomatic.com 15
SYLAX LUG (DI) B SYLAX WAFER (DI) B
OPTIONS:
® ®
Discount Code Discount Code
• Gear
• Shaft extensions
149G (DUCTILE IRON DISC) - SYLAX® Full Lug Series Cast 149G (DUCTILE IRON DISC)- SYLAX® Wafer Style Series OPTIONAL SEATS:
• Buna-N
iron body with epoxy coated ductile iron disc. Seat Liner EPDM Cast iron body with epoxy coated ductile iron disc.
(Buna-N optional) with standard ISO top flange for direct Seat Liner EPDM (Buna-N optional) with standard ISO
mounting of actuator. top flange for direct mounting of actuator.
• Viton
Working Temp: Max+230°F (+110°C) Pressure Max: 200 PSI Working Temp: Max+230°F (+110°C) Pressure Max: 200 PSI
SIZE PART NO. WGT LIST PRICE LIST PRICE SIZE PART NO. WGT LIST PRICE LIST PRICE
(Ductile Iron Disc) WITH LEVER WITH GEAR (Ductile Iron Disc) WITH LEVER WITH GEAR
GEAR
Up to 24” available CONSULT FACTORY.
149G (316SS DISC) - SYLAX® Full Lug Series - Cast iron 149G (316SS DISC)- SYLAX® Wafer Style Series - Cast Gear Operators for Sylax Butterfly Valves
body with 316 stainless steel disc. Seat Liner EPDM iron body with 316 stainless steel disc. Seat Liner EPDM Add “G” to Lever Operated part number for a gear
(Buna-N optional) with standard ISO top flange for direct (Buna-N optional) with standard ISO top flange for direct operated valve. With position indicator on top of gear box.
mounting of actuator. mounting of actuator.
Working Temp:Max+230°F (+110°C) Pressure Max: 200 PSI Working Temp: Max+230˚F (+110˚C) Pressure Max: 200 PSI Up to 24” available CONSULT FACTORY.
SIZE PART NO. WGT LIST PRICE LIST PRICE SIZE PART NO. WGT LIST PRICE LIST PRICE
(316SS Disc) WITH LEVER WITH GEAR (316SS Disc) WITH LEVER WITH GEAR
2" 149G037300 9 $ 156.85 $ 223.84 2" 149G 011266 8 $ 118.56 $ 211.94
21/2 " 149G037302 11 $ 158.11 $ 242.46 21/2 " 149G 011287 8 $ 127.41 $ 220.79
3" 149G037303 12 $ 165.12 $ 256.86 3" 149G 011297 9 $ 144.13 $ 237.51
4" 149G037305 19 $ 218.32 $ 301.68 4" 149G 011316 13 $ 174.49 $ 275.87
5" 149G037306 22 $ 264.10 $ 350.53 5" 149G 011334 17 $ 221.31 $ 322.73
6" 149G037307 26 $ 336.62 $ 418.96 6" 149G 011343 18 $ 251.05 $ 352.44
8" 149G037308 51 $ 592.54 $ 727.81 8" 149G 016281 37 $ 456.53 $ 575.93
10" 149G037309 61 $ 788.23 $ 929.37 10" 149G 013612 51 $ 764.76 $ 869.48
12" 149G037310 93 $1,012.41 $1,179.32 12" 149G 023904 57 $ 960.31 $1,252.50
Up to 24” available CONSULT FACTORY. Up to 24” available CONSULT FACTORY.
ACTUATED (DI) Discount Code B ACTUATED (SS) Discount Code B BUTTERFLY VALVE
SYLAX® FULL LUG SERIES 149GA SYLAX® FULL LUG SERIES 149GA Butterfly Valves 3"- 24"
Body: Cast Iron Body: Cast Iron
Disc: Epoxy Coated Ductile Iron Disc: 316 Stainless Steel AWWA C504
Seat Liner: EPDM Seat Liner: EPDM See page 19
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
PNEUMATIC ACTUATED
(Ductile Iron Disc) (316SS Disc)
2" 149G 037290A 33 $ 1,782.00 2" 149G 037300A 33 $ 1,799.00
21/2 " 149G 037291A 35 $ 1,788.00 21/2 " 149G 037302A 35 $ 1,807.00
3" 149G 037292A 36 $ 1,799.00 3" 149G 037303A 36 $ 1,820.00
4" 149G 037293A 46 $ 1,881.00 4" 149G 037305A 46 $ 1,905.00
5" 149G 037294A 46 $ 1,907.00 5" 149G 037306A 46 $ 1,937.00
6" 149G 037295A 53 $ 2,372.00 6" 149G 037307A 53 $ 2,406.00
8" 149G 037296A 103 $ 3,021.00 8" 149G 037308A 103 $ 3,087.00
10" 149G 037297A 125 $ 3,617.00 10" 149G 037309A 125 $ 3,736.00
12" 149G 037299A 159 $ 4,337.00 12" 149G 037310A 159 $ 4,477.00
Up to 24” available CONSULT FACTORY. Up to 24” available CONSULT FACTORY.
CHAINWHEEL OPTION
SYLAX® WAFER STYLE SERIES 149GA-010 SYLAX® WAFER STYLE SERIES 149GA
Body: Cast Iron Body: Cast Iron
Disc: Epoxy Coated Ductile Iron Disc: 316 Stainless Steel
Seat Liner: EPDM Seat Liner: EPDM
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
(Ductile Iron Disc) (316SS Disc)
2" 149G010894A 33 $ 1,774.00 2" 149G011266A 32 $ 1,790.00
21/2 " 149G010909A 35 $ 1,779.00 21/2 " 149G011287A 32 $ 1,796.00
3" 149G010928A 36 $ 1,790.00 3" 149G011297A 33 $ 1,810.00
4" 149G010955A 46 $ 1,871.00 4" 149G011316A 37 $ 1,893.00
5" 149G010989A 46 $ 1,894.00 5" 149G011334A 41 $ 1,921.00
Chainwheel Option
6" 149G011005A 53 $ 2,357.00 6" 149G011343A 45 $ 2,388.00
103
2”-24”
8" 149G016281A $ 2,990.00 8" 149G016257A 98 $ 3,051.00
10" 149G41010A 125 $ 3,561.00 10" 149G013612A 115 $ 3,674.00 (Use with gear option)
12" 149G023904A 159 $ 4,286.00 12" 149G023900A 149 $ 4,407.00 Price on Application
Up to 24” available CONSULT FACTORY. Up to 24” available CONSULT FACTORY.
60SE-ENVIRO FOOT VALVE- body with threaded female 333E-ENVIRO FOOT VALVE- body with high strength acetal 333DPE-ENVIRO FOOT VALVE- body, but with dual pur-
connection. Features a NITRILE (Buna-N) seal, acetal poppet (21/2", poppet. Tappered stainless steel strainer, end cap, spring and pose male and female threads.
3" and 4" have bronze poppets) stainless steel spring and strainer. fasteners. NITRILE (Buna-N) seal. Temp Max: 180°F (80C) Pressure Max: 250 PSI
Temp Max: 180°F (80C) Temp Max: 180°F (80C) Pressure Max: 250 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
Pressure Max: 250 PSI (1/2" size 150 PSI)
SIZE PART NO. WGT. CASE QTY. LIST PRICE 11/4"M x 1"F 4181E .5 50 $ 47.67
1" 4171E .6 50 $ 43.32 11/2"M x 11/4"F 4182E .8 36 $ 56.74
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1/2"* 5820E* .1 10 $ 34.24 11/4" 4172E .8 36 $ 52.25
3/4" 4100E .3 100 $ 38.24
1" 4101E .8 50 $ 42.49
333SS A 124P A
11/4"** 4102E** .8 50 $ 48.22
11/4" 4103E 1 36 $ 51.29 Discount Code Discount Code
11/2 " 4104E 1.6 25 $ 82.75
2" 4105E 2.1 16 $ 131.28
21/2 " 4106E 6 $ 435.07
3" 4107E 11 $ 599.90
4" 4108E 19 $ 998.20
*Polyethylene strainer
**Model 600S (4102E) will pass through a 2" pipe.
190D/193D/190P Discount Code A 333SS- FOOT VALVE- All 303 Stainless steel body with high
strength acetal poppet. Tappered stainless steel strainer, end cap, 124P- features a simple flow through design with corrosion
resistant parts. Durable Nylon body that has a 4 in 1 combo
spring and fasteners. NITRILE (Buna-N) seal. feature (3/4'' – 1-1/2'')
Temp Max: 180°F (80C) Pressure Max: 250 PSI Temp Max: 140°F (60C) Pressure Max: 150 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
SIZE PART NO. WGT. Enters Pipe Size LIST PRICE
1" 4171E .6 50 $ 54.15
FOOT VALVES 800.833.2040
190D- Acetal body and strainer, Nylon 11 poppet. 104P Discount Code A 104PS Discount Code A
Stainless steel spring and NITRILE (Buna-N) seal.
193D- Similar to the 190D with one-piece acetal body
and strainer.
190P- Polypropylene body and strainer. Stainless steel spring
and VITON seal.
SIZE PART NO. MODEL WGT. CASE QTY. LIST PRICE
3/8" 5619 193D .03 10 $ 17.00
3/8" 5726 190P .03 10 $ 17.10
1/2" 5620 193D .03 10 $ 27.00
1/2" 5727 190P .03 10 $ 29.00 104P- Reinforced nylon body with threaded female connection. 104PS- Features rugged high-strength noryl GTX 830 valve
3/4" 5728 190P .08 10 $ 33.00 Polyethylene strainer, polyethylene/acetal poppet. NITRILE body with a tapered stainless steel, NITRILE (Buna-N) seal and
11/2" 5724 190D .28 6 $ 41.00 (Buna-N) seal and stainless steel spring. polypropylene follower.
2" 5725 190D .41 6 $ 85.00 Temp Max: 150°F (65C) Pressure Max: 150 PSI Temp Max: 140°F (60C) Pressure Max: 150 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
FLOMATIC
FREIGHT
We offer fast delivery
POLICY
$1,500.00 net prepaid
• “ B” Code items: FOB Factory
Minimum Net Order of $75.00
812XFF- All 316 stainless steel. Flanged connection ANSI 150. 302BT- Cast iron body with epoxy coating, bronze disc and seat 80S6F - Foot Valve- All 316 stainless steel threaded check valve
Metal to metal seating and teflon O-ring. (2"-12"). Flanged connection ANSI B16.1, class 125. Features a body. Stainless steel spring, poppet, strainer and VITON seal.
11/2"- 4" available with NITRILE (Buna-N) or VITON seal, add VULCANIZED Viton seal and stainless steel strainer. Temp Max: 400°F (200°C) Pressure Max: 400 PSI
10% to list (Model 812XRF/812XVF). Temp Max: 180°F (80C)
SIZE PART NO. WGT. LIST PRICE
1" 4031S6F 2.1 $ 225.00
Temp Max: 300°F (150C) Pressure Max: 275 PSI Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24"
Also available as model 302S6T with 316SS trim and model 302S6
all 316SS design.
16FL STRAINER- All 316 Stainless steel body, flanged with 16 STRAINER- All 316 Stainless steel body, threaded FNPT 6P STRAINER- Plastic (polyethylene) with male NPT threads.
316SS internal strainer. Standard 20 mesh replacement screens “Y-Type” strainer. Standard 20 mesh replaceable screens optional Converts a check valve to a foot valve. (See picture above).
optional 40, 60, 80 and 100 mesh screens (fit inside of 20 mesh). 40, 60, 80 and 100 mesh screens (fit inside of 20 mesh). Temp Max: 180°F (80C)
ASME 150 Class. ASME 600 Class.
Standard 20 Mesh – if optional 40, 60, 80, or 100 add to Standard 20 Mesh – if optional 40, 60, 80, or 100 add to STRAINER ONLY
end of part number: 40 Mesh = 040 to end of part number end of part number: 40 Mesh = 040 to end of part number SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4" 4300P .1 25 $ 5.75
60 Mesh = 060 to end of part number 60 Mesh = 060 to end of part number
1" 4301P .1 25 $ 6.02
80 Mesh = 080 to end of part number 80 Mesh = 080 to end of part number
11/4" 4302P .2 25 $ 6.77
100 Mesh = 100 to end of part number 100 Mesh = 100 to end of part number
FOOT VALVES & STRAINERS 800.833.2040
46T STRAINER B
*Temp Max: 800°F *Pressure Max: 600 PSI
*See temperature/pressure rating.
*See temperature/pressure rating.
STAINLESS CARBON
STAINLESS CARBON Discount Code
SIZE PART NO. LIST PRICE LIST PRICE
1/4" S2501-X-0300 $ 125.00 $ 132.00
SIZE PART NO. LIST PRICE LIST PRICE
1" S0014-X-0300 $ 272.00 $ 341.00
3/8" S3751-X-0300 $ 125.00 $ 132.00
11/2 " S0154-X-0300 $ 435.00 $ 525.00
1/2" S5001-X-0300 $ 125.00 $ 132.00
2" S0024-X-0300 $ 607.00 $ 640.00
3/4" S7501-X-0300 $ 150.00 $ 132.00
21/2 " S0254-X-0300 $ 1,339.00 $ POA
1" S0011-X-0300 $ 175.00 $ 157.00
3" S0034-X-0300 $ 1,545.00 $ POA
11/4" S1251-X-0300 $ 189.00 $ 184.00
4" S0044-X-0300 $ 1,828.00 $ POA
11/2 " S0151-X-0300 $ 227.00 $ 244.00
2" S0021-X-0300 $ 499.00 $ 260.00
Strainers supplied with FNPT tapped retainer cap for blow off outlet.
Strainers supplied with PTFE cap seal. Strainers supplied with FNPT tapped retainer cap for blow off outlet.
Optional graphite list price cap seal adder: $15.00 Strainers supplied with PTFE cap seal. Optional graphite list price cap seal
6SE STRAINER A
adder: $15.00 Many different types of configurations available. 46T STRAINER- Cast iron body with epoxy coating. Threaded
46 STRAINER B
female connection. Removable polyethylene strainer.
Discount Code
Discount Code Temp Max: 180°F (80C)
SIZE PART NO. WGT. LIST PRICE
2" 4364 2.5 $ 87.00
21/2 " 4365 4 $ 140.00
3" 4366 8.2 $ 147.00
4" 4367 14 $ 465.00
6SS STRAINER A
12" 5826S 80 $ 1,589.00
* End caps on strainer are plastic. 125 PSI STEAM
Discount Code 14" 5827S 121 $ 2,524.00 SIZE PART NO. WGT. LIST PRICE
16" 5828S 166 $ 3,225.00
Threaded
18" 5829S 211 $ 4,043.00 3/8" 8711E .5 $ 32.00
20" 5830S 256 $ 4,177.00 1/2" 8712E .3 $ 35.00
24" 5832S 346 $ 5,513.00 3/4" 8713E 2 $ 55.00
1" 8714E 4 $ 63.00
11/4" 87142E 5 $ 112.00
11/2 " 87143E 6 $ 145.00
2" 87144E 9 $ 250.00
21/2 "* 87145* 15 $ 267.00
3"* 87146* 25 $ 340.00
4"* 87147* 95 $ 610.00
6SS STRAINER- All 303 stainless steel body with threaded 6"* 87148* 185 $ 987.00
female connection. Stainless steel strainer with unleaded bronze. 8"* 87149* 299 $ 1,840.00
Stainless steel or plastic caps.
* Cast iron and flanged connection.
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4301SS .6 49 $ 49.00
11/4"* 4302SS * .6 36 $ 59.00
20 www.flomatic.com
CHECK THESE
FEATURES...
PRESSURE REDUCING VALVE - Reduces high upstream pressure to lower downstream pressure. CONSULT FACTORY for control valve MODULATING ALTITUDE VALVE - Single acting level
price list for specific options. control with modulation for final filling of storage tanks.
SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE CONSULT FACTORY for control valve price list for specific options.
SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE
SIZE 150#
C/CA LIST PRICE 150#CF FLANGED LIST PRICE SIZE C/CA
150# LIST PRICE 150#C/CA LIST PRICE SIZE THREADED CF MODEL* C/CA C/CA
C THREADED 150# C FLANGED C FLANGED 150# C FLANGED C FLANGED
11/4" C101B0B00100 $ 1,208
150# 300# 150# 300#
11/2" $2,330$ 3,121 $2,200
$ 3,246 $2,465
$ 3,450
11/2 " C101C0B00100 $ 1,230 11/2 " C101C1B00100 $ 1,316 C101C2B00100 $ 1,516 2" $ 3,439 $ 3,521 $ 3,767
2" C101D0B00100 $ 1,240 2" C101D1B00100 $ 1,561 C101D2B00100 $ 1,633 221/21/"2 " $ 3,724 $ 3,500 $ 3,898 $ 4,171
21/2" C101E0B00100 $ 1,545 CF101E1B00100 $ 1,544 21/2" C101E1B00100 $ 1,638 C101E2B00100 $ 1,856 3"3" $ 3,620 $ 3,946 $ 4,223
3" 4"4" $ 4,267 $ 4,617 $ 4,940
CF101F1B00100 $ 1,576 3" C101F1B00100 $ 1,676 C101F2B00100 $ 1,894
6"6" $ 4,802 $ 5,715 $ 6,115
4" CF101G1B00100 $ 1,681 4" C101G1B00100 $ 2,154 C101G2B00100 $ 2,326
8"8" $ 6,141 $ 8,215 $ 8,790
6" CF101J1B00100 $ 2,557 6" C101J1B00100 $ 3,402 C101J2B00100 $ 3,680 10"
10" $ 8,296 $ 9,063 $ 9,697
8" CF101K1B00100 $ 4,137 8" C101K1B00100 $ 5,704 C101K2B00100 $ 6,218 12"
12" $12,589 $ 13,779 $ 14,744
10" CF101L1B00100 $ 6,060 10" C101L1B00100 $ 8,127 C101L2B00100 $ 8,876
12" CF101M1B00100 $10,375
Note: CONSULT FACTORY for larger sizes (20” - 36” CONSULT FACTORY).
12" C101M1B00100 $13,365 C101M2B00100 $13,928
USA
____
14” - 36” CONSULT FACTORY
Model CA Angle body valve same pricing as Model C ARRA-
Model CFA Angle body valve same pricing as Model CF Compliant
C205/CA205 Discount Code B C301/CA301 Discount Code B C401/CA4 01 Discount Code B
BACK PRESSURE SUSTAINING VALVE - Sustains a PRESSURE RELIEF VALVE - Protects against excessive
minimum upstream pressure to prevent overdrafting the supply. presssure. CONSULT FACTORY for control valve price list for
CONSULT FACTORY for control valve price list for specific options. specific options.
C/CA C/CA C/CA C/CA
SIZE THREADED CF MODEL* C FLANGED C FLANGED SIZE C THREADED CF FLANGED* C FLANGED C FLANGED
SIZE C THREADED CF150#
FLANGED* C FLANGED
150# C FLANGED
300#
11/4" $ 1,278
150# 150# 300# 150# 150# 300#
22 www.flomatic.com
C501/CA501 Discount Code B C601/CA601 Discount Code B C601DP Discount Code B
C705/CF705 B C801-2/CA801-2 B
11/2 " $ 3,364 $ 3,994 $ 4,220
2" $ 3,829 $ 4,204 $ 4,442 Discount Code Discount Code
21/2 $ 4,192 $ 4,126 $ 4,458 $ 4,689
3" $ 4,267 $ 4,473 $ 4,707
4" $ 4,515 $ 4,766 $ 4,936
6" $ 5,143 $ 5,877 $ 6,155
8" $ 6,647 $ 8,211 $ 8,726
10" $ 8,858 $ 11,081 $ 11,830
12" $ 13,784 $ 16,295 $ 16,858
* Reduced cavitation configuration.
C701/CA701 Discount Code B SOLENOID CONTROL VALVE - Remote actuation for valve
position. Specify N.O. (normally open C802); N.C. (normally
PILOT OPERATED FLOAT VALVE - For level control of closed C801). CONSULT FACTORY for control valve price list for
storage tanks, reservoirs, or basins. CONSULT FACTORY for specific options.
control valve price list for specific options. C/CA C/CA
C/CA C/CA SIZE C THREADED CF FLANGED* C FLANGED C FLANGED
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED 150# 150# 300#
11/4" $ 2,008 11/4" $1,590
150# 150# 300#
C901/CA901 B C1001/CA1001 B
150# C FLANGED* C FLANGED* * Reduced cavitation configuration. * Reduced cavitation configuration.
150# 300#
11/4" $1,590 Discount Code Discount Code
11/2 " $1,590 $ 1,716 $ 1,916
2" $1,618 $ 1,961 $ 2,033
21/2 " $1,932 $ 1,944 $ 2,038 $ 2,176
3" $ 1,976 $ 2,076 $ 2,252
4" $ 2,081 $ 2,690 $ 2,863
6" $ 2,957 $ 3,802 $ 4,080
8" $ 4,537 $ 6,104 $ 6,618
10" $ 6,460 $ 8,527 $ 9,276
12" $10,775 $13,765 $14,328
FLOW CONTROL VALVE - Maintains a pre-set maximum HYDRAULIC CHECK VALVE - Closes to prevent flow revesal.
Note: CONSULT FACTORY for larger sizes (20” - 36” CONSULT FAC- flow rate regardless of changing line pressures. CONSULT FACTORY Adjustable opening & closing speed controls. CONSULT FACTORY
TORY). for control valve price list for specific options. for control valve price list for specific options.
* Reduced cavitation configuration. C/CA C/CA C/CA C/CA
SIZE CF FLANGED C FLANGED C FLANGED SIZE C THREADED CF FLANGED C FLANGED C FLANGED
11/4 " $ 1,108
150# 150# 300# 150# 150# 300#
11/2 " $ 2,370 $ 2,049 $ 3,161 11/2 " $ 1,150 $ 1,216 $ 1,416
2" —— $ 2,113 $ 2,176 2" $ 1,219 $ 1,461 $ 1,533
21/2 " $ 2,370 $ 2,962 $ 3,161
CONTACT FACTORY FOR
l COMPLETE PRICE LISTS 21/2 " $ 1,479 $ 1,444 $ 1,581 $ 1,795
3" $ 2,406 $ 3,061 $ 3,177 3" $ 1,579 $ 1,665 $ 1,879
l CONTROL VALVE TECHNICAL BINDER
4" $ 2,652 $ 3,655 $ 3,827 4" $ 1,691 $ 2,170 $ 2,341
l CD DISC 6" $ 3,911 $ 4,884 $ 5,164 6" $ 2,628 $ 3,302 $ 3,580
8" $ 5,636 $ 7,370 $ 7,885 8" $ 4,319 $ 5,925 $ 6,440
10" $ 7,341 $ 10,161 $ 10,912 10" $ 6,377 $ 8,027 $ 8,776
12" $ 11,663 $ 14,938 $ 15,502 12" $ 10,994 $ 13,418 $ 13,983
www.flomatic.com 23
PRP Discount Code B MINI BALL VALVE Discount Code B FC4 Discount Code B
W!
NE
PRP- 3/8” Pressure Reducing Pilot in Unleaded MINI BALL VALVE- Mini ball valves are a quater turn full FLOW CONTROL- Adjustable restrictor that has free flow in
Bronze Enables Automatic Control Valves to reduce inlet ported on off isolation valves used on external control valve the direction of the arrow on the body and operates as a
pressure to a preset outlet pressure and maintain it irregard- pilot controls. needle valve in the reverse direction.
less to what fluctuations in flow occur. SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE
PART NO.
CONTROL VALVE ACCESSORIES 800.833.2040
BPP - Back Pressure Reducing Pilot in Unleaded SOLNEIOD VALVE- For on off control used to alternatly apply Y STRAINER- Unleaded Bronze body, 20 mesh stainless
Bronze Enables Automatic Control Valves to sustain a preset pressure to and exhaust pressure from the main valve body cover. steel strainer. Furnished with clean out plug.ction as M
inlet pressure. Also enables control valve to relieve pressure Valves are specified either valve body cove. Valves are 3 way eM SIZE
upon reaching a preset inlet pressure. 120V and are specified either normally open or PART NO. LIST PRICE
closed. 1/4" x 3/8" 8710E $ 12.00
Temp Max: 180°F (80C) Pressure Max: 400 PSI
LIST PRICE
PART NO. SPRING RANGE LIST PRICE STAINLESS SIZE PART NO. DESCRIPTION LIST PRICE CONTACT FACTORY FOR
160100A 5-80 PSI $310.00 $350.00 1/4” 8853 Open $ 280.00 l COMPLETE PRICE LISTS
160100B 25-125 PSI $310.00 $350.00 1/4” 8862 Closed $ 280.00 l CONTROL VALVE TECHNICAL BINDER
160100C 2-35 PSI $310.00 $350.00 l CD DISC
160100D 30-300 PSI $310.00 $350.00
* Other types available.
* For stainless steel, put “S” before letter and after part number.
ACP Manufacturing
MODEL 165 B CV80S6 B Plant in Upstate
New York
Discount Code Discount Code
W!
NE
ACP - Accelerator Pilot in Unleaded Bronze - It is CV80S6 CHECK VALVE- All 316SS body with Delrin poppet
used in systems to control flow by applying an independent and Buna-N seal. Threaded female x female connection.
pressure to the diaphragm. Enables automatic control valves Temp Max: 180° F (82 C) Pressure Max: 400 PSI
to rapidly vent water from control diaphragm, thus allowing
quicker main valve opening.
SIZE PART NO. LIST PRICE
Temp Max: 180°F (80C) Pressure Max: 300 PSI 3/8” 5159 $ 76.41
1/2” 4029 $ 92.42
BACK PRESSURE VALVE- Delivers constant pre-set inlet pressure and regulate PRESSURE REDUCING VALVE (PRV)- Model C150E when properly installed will regulate high
back-pressure automatically. This is accomplished with and adjustable spring loaded upstream (inlet pressure) to a lower regulated downstream (outlet pressure) constant pressure within a
balancing valve factory set to automatically regulate the up-stream pressure to a range regardless ofwater flow. This is accomplished by an adjustable spring loaded balancing valve
factory set of 30 psi. For use with geothermal heating system, domestic well water factory set to automatically regulate the downstream pressure.
systems, irrigation systems, pressure relief valve function. NSF/ANSI 61-2010 Certified by IAPMO R&T, 1⁄2” through 11⁄4”
Temp Max: 180°F (80C) Pressure Max: 400 PSI
Temp Max: 180°F (80C) Pressure Max: 400 PSI ASSE® Listed 1003, IAPMO® listed Factory set at 50 PSI
Factory set at 30 PSI Certified for City of Los Angeles
Designed for Geo-thermo systems, Artisian wells, anti-floating, Part numbers are for 15 - 75 PSI range
pressure relief, etc.
SIZE PART NO. C150E C150ET
1/2" C150099E $ 110.00 $ 97.00
3/4" C150000E $ 111.00 $ 97.50
Part numbers are for 15 - 75 PSI range
1" C150001E $ 145.00 $133.00
11/4"* C150002E* $ 331.00 $316.73
SIZE PART NO. PRICE
*Note: 11/4" size is one size smaller restricted flow. Maximum 30 GPM, see model C150EHF for higher
capacity.
**High flow in to 70 GPM
Product Specifications
• Connection: NPT (Male/Female),or Sweat (see product option chart below) • Max Pressure: 400 PSI (27 bar) • Max Temperature: 1800F (800C)
• Pressure Regulating Setting: Factory set at 50 psi • Standard Spring Adjustment range see part number chart
DIRECT ACTING PUMP CONTROL VALVE- Reduces rapid DIRECT ACTING PUMP CONTROL VALVE- Reduces rapid CONSTANT PRESSURE PUMP CONTROL- Reduces rapid
pump cycling and maintains a pre-set operating pressure for wells. pump cycling and maintains a pre-set operating pressure for wells. pump cycle with field adjustable by-pass and maintains a pre-set
Threaded female x female connection. Features a low lead alloy Threaded female I.D.x male O.D. on inlet and outlet connections. operating downstream pressure. Flow 1-5200 GPM depending on
body & composite bell housing, Nylon reinforced Buna-N Features a low lead alloy body & composite bell housing, Nylon rein- size. For use with domestic water well, municipal water systems,
diaphragm. Supplied with two FNPT tailpiece and union nuts. forced Buna-N diaphragm. industrial water system, irrigation and agriculture.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 250 PSI
Factory set at 50 PSI
Factory set at 50 PSI Factory set at 60 PSI
SIZE PART NO. SPRING RANGE LIST PRICE
3/4" C152000E 15 - 75 PSI $201.10
$177.65
SIZE PART NO. SPRING RANGE LIST PRICE
1" C152001ET 15 - 75 PSI $225.65
1" C152001E 15 - 75 PSI $236.93
$177.92
SIZE PART NO. LIST PRICE PART NO. LIST PRICE
CYCLE GARD ® IV
11/2 " C152103E 15 - 150 PSI $$389.56
209.6
$683.74
CB152E A
2" C152104E 15$389.56
- 150 PSI $883.88
Discount Code
*Note: 11/4” size is one size smaller restricted flow.
Maximum 30 GPM. See model C152EHF below for higher capacity.
CYCLE GARD®HY-FLOW
C152EHF Discount Code A
• Slotted seat
operating pressure for wells. Threaded female x female union end
or female I.D. x male O.D. on inlet and outlet connections. Features
• No drilled holes
a unleaded alloy body & composite bell housing, Nylon reinforced
Buna-N diaphragm. Supplied with two FNPT tailpiece and union nuts.
HIGH FLOW DIRECT ACTING PUMP CONTROL VALVE- With two (2) 1⁄4” tappings for gage and pressure switch. One (1) 3⁄4”
• Non-closing seat
Model C152EHF reduces rapid pump cycle with field adjustable by- tapping for water tank.
pass and maintains a pre-set operating downstream pressure for
• No screen
wells. Threaded female x female NPT connection with hex end OD. Temp Max: 180°F (80C) Pressure Max 400 PSI
Features a low lead alloy body and cover. Nylon reinforced Buna-N Factory set at 50 PSI
diaphragm. Ideal for flows up to 70 GPM.
SIZE PART NO. SPRING RANGE LIST PRICE
1" CB152001E 15-75 PSI $ 280.00
Temp Max: 180°F (80C) Pressure Max: 400 PSI
Factory set at 50 PSI 1" CB152101E 15-150 PSI $ 280.00
SIZE PART NO. SPRING RANGE LIST PRICE
1 1/4" C152002EHF 15-75 PSI $625.00
NPT ID x NPT OD
SCREEN DRILLED
1 1/4" C152102EHF 15-150 PSI $625.00 SIZE PART NO. SPRING RANGE LIST PRICE
1" CB152001ET 15-75 PSI $ 245.00
HOLE
1" CB152101ET 15-150 PSI $ 245.00
HYDROSTAT ® BOOSTER-IT ®
MODEL C3100E Discount Code A C154 Discount Code A
800.833.2040
®
COMPACT PUMP PRESSURE- Reduces rapid pump cycling BOOSTER-IT WATER SYSTEM PUMP CONTROL
and maintains a pre-set operating pressure for wells. Threaded VALVE- Designed for well water pumping systems, booster
female I.D.x male O.D. on inlet and outlet connections. Features a systems, and pump irrigation pumping systems. Valve body is
unleaded alloy body & cover, Nylon reinforced Buna-N diaphragm. cast from an unleaded bronze alloy with two 1/4" tapped holes
1” NTP Female connection x 11/4" male NPT. on tank side for pressure switch and gauge.
Temp Max: 180°F (80C) Pressure Max: 400 PSI Temp Max: 180°F (80C) Pressure Max: 175 PSI
Max Flow 25 GPM Factory set at 60 PSI SIZE PART NO. WGT. CASE QTY. LIST PRICE
SIZE PART # SPRING RANGE LIST PRICE 3/4" C154100 .7 100 $ 56.23
1” C3100E 35 - 65 PSI $ 253.05 1" C154101 1.3 49 $ 77.78
1” * C3100EB* 35 - 65 PSI $ 262.50 11/4" C154102 1.6 36 $ 107.54
11/2 " C154103 2.5 25 $ 119.99
*With (2) 1/4” Tappings 2" C154104 3.1 16 $ 153.08
®
Note: BOOSTER-IT requires a safety pressure release valve, not UNLEADED VALVES
available from Flomatic Valves.
COMBOAIR® B
Viton Seal standard.
Discount Code
AIR RELEASE 800.833.2040
MAXIAIR® B WELLAIR® B
COMBOAIR®- Cast iron body-stainless steel trim. Combines
features of Miniair™ and Maxiair™ in one housing. Small orifice
Discount Code Discount Code is 3/32” in the 1” valve, 3/16” in the 2” and 3” sizes.
female x female connections. NITRILE (Buna-N) seat. Large throttling valve. Ideal for deep well applications. Discount Code
orifice– equals inlet size. Vents on filling- eliminates vacuum
under pressure loss. Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI
Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI
INLET OUTLET PART NO. WGT. LIST PRICE
INLET OUTLET PART NO. WGT. LIST PRICE 1/2" 1/2" 6560 12 $ 548.10
1/2 " 1/2" 6520 7 $ 315.00 1" 1" 6561 22 $ 678.30
1" 1" 6521 16 $ 421.05 2" 2" 6562 55 $ 971.25
2" 2" 6522 42 $ 686.70 3" 3" 6563 100 $ 1,610.70
3" 3" 6523 92 $ 1,023.75
4" 4" 6524 154 $ 1,785.00
CONSULT FACTORY for full line of sizes available.
6" 6" 6525 174 $ 2,475.00 6BSE BUG SCREEN - Picture shown with valve not included.
CONSULT FACTORY for full line of sizes available.
Unleaded bronze body with threaded female connection. Stainless
steel strainer with unleaded bronze. Stainless steel or plastic caps,
with nipple for installation into air valve vent.
SIZE PART NO. WGT. LIST PRICE
1/2" 4399E-1 0.2 $ 18.06
1" 4301E-1 1.2 $ 20.37
2"* 4304E-1 * 2.8 $ 57.14
3" 4306E-1 7.7 $ 128.15
* End caps on strainer are plastic.
•Automatic
SEWAIR-DUAL®- Cast iron body, stainless steel trim. NITRILE SEWAIR-COMBO®- Cast iron body, stainless steel trim. BACKFLUSH- Fabric reinforced NITRILE (Buna-N) hose with
(Buna-N) seat. Provides protection of both small and large NITRILE (Buna-N) seat. Provides same protection as Sewair-Dual®, bronze shut off valves and galvanized quick disconnects. Designed
orifices. Two body construction. but combines into one body. for pressure backflush Sewair models.
Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSI Temp Max: 150°F (65C) Pressure Max: 175 PSI INLET PART NO. WGT. LIST PRICE
INLET OUTLET PART NO. WGT. LIST PRICE INLET OUTLET PART NO. WGT. LIST PRICE 2" BF2 12 $ 385.35
3" BF3 19 $ 605.85
2" 1" 6640 120 $ 2,725.00 2" 1" 6650 80 $ 1,556.42
2" 2" 6641 150 $ 3,100.00 2" 2" 6651 110 $ 2,332.26 CONSULT FACTORY for full line of sizes available.
CONSULT FACTORY for full line of sizes available. 3" 3" 6652 145 $ 3,344.36
CONSULT FACTORY for full line of sizes available.
Pictured with optional Air Gap Pictured with optional Air Gap
REDUCED PRESSURE ZONE ASSEMBLY REDUCED PRESSURE ZONE ASSEMBLY REDUCED PRESSURE ZONE ASSEMBLY- with 900 street
Body: Unleaded Bronze Springs: Stainless Steel Body: Unleaded Bronze Springs: Stainless Steel angle elbows.
Discs: Silicone Temp: 180°F (80C) Discs: Silicone Temp: 180°F (80C) Body: Unleaded Bronze Springs: Stainless Steel
Pressure: 175 PSI Pressure: 175 PSI Discs: Silicone Temp: 180°F (80C)
AIR GAP ADAPTERS -See page 32 AIR GAP ADAPTERS -See page 32 Pressure: 175 PSI
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
With Ball Valves
" B9399E 4.5 $ 417.00
With Ball Valves
3/ " B9200E 9 $ 529.42
1/ With Ball Valves
3/ " B9200ESA 10 $ 662.29
2
RPZ C
4
RPZSS II C
11/2" B9203ES 34 $ 1,202.01
Discount Code 2" B9204ES 41 $ 1,388.44
With Union End Ball Valves
3/ " B9200EU 9 $ 573.71
4
Y STRAINERS C
10" B92011 1250 $ 17,844.75
Discount Code With OSY Gate Valves
21/2" B9205OSY 172 $ 3,558.65
3" B9206OSY 200 $ 3,765.68
4" B9207OSY 344 $ 4,704.01
6" B9209OSY 540 $ 7,135.84
8" B92010OSY 780 $12,975.94
10" B92011OSY 1314 $18,369.02
SINGLE DETECTOR CHECK- Designed to protect the
potable water supplies from potential backflow. Optional
metered by-pass to detect any unauthorized water use
and leaks. FM approved for 4'' & 6'' sizes, 3'' & 8'' sizes
now available. No gate valve included except for OS & Y
units.
Body: Ductile Iron Springs: Stainless Steel UNLEADED VALVES
STRAINER- Unleaded Bronze body, 20 mesh (50 mesh 3/8" & Discs: Silicone Temp: 140°F (60C)
1/2")stainless steel strainer. Furnished with clean out plug. Pressure: 175 PSI
Pressure Max: 200 PSI WOG • 125 PSI STEAM
SIZE PART NO. DESCRIPTION LIST PRICE
4" B9017 Flanged $ 903.00
SIZE PART NO. WGT. LIST PRICE
4" B9017G Grooved Connection $ 903.00
Threaded
3/" 8711E .5 $ 32.00
4" B9017D Flanged w/metered bypass $ 1,467.90
8
1/ " 8712E .3 $ 35.00
4" B9017DG Grooved w/metered bypass $ 1,467.90
2
3/" 8713E 2 $ 55.00
4" B9007OSY Flanged w/OSY GateValves $ 2,222.85
4
BACKFLOW PREVENTERS
DOUBLE CHECK VALVE ASSEMBLY DOUBLE CHECK VALVE ASSEMBLY PRESSURE VACUUM BREAKER ASSEMBLY
Body: Unleaded Bronze Springs: Stainless Steel Body: Ductile Iron Springs: Stainless Steel Body: Bronze Springs: Stainless Steel
Discs: Silicone Temp: 180°F (80C) Discs: Silicone Temp: 140°F (60C)
UL®,FM approval–2 1/2"-8"
Discs: Silicone Temp: 140°F (60C)
Pressure: 175 PSI Pressure: 175 PSI Pressure: 175 PSI
Testing is simplified with vertical test cocks and top entry. Testing is simplified with vertical test cocks and top entry.
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
With Ball Valves SIZE PART NO. WGT. LIST PRICE
" B9100E 7 $ 263.68 " B9500 3
With NRS Gate Valves
21/2" B9105 54 $ 2,520.41 $ 170.00
3/ 3/
4 4
1" B9101E 8 $ 288.40 3" B9106 176 $ 2,625.47 1" B9501 4 $ 198.68
11/2" B9103E 24 $ 638.60 4" B9107 290 $ 3,351.62 11/4 " B9502 18 $ 802.76
2" B9104E 28 $ 743.66 6" B9109 447 $ 5,808.17 11/2 " B9503 20 $ 886.58
With Ball Valves & Strainer 8" B91010 695 $10,022.93 2" B9504 24 $ 994.38
3/ " B9100ES 9 $ 361.53
4 10" B91011 1170 $ 15,457.21
1" B9101ES 12 $ 443.93
With Union End Ball Valves
3/ " B9500U 4 $ 191.42
4
1 /2" B9103ES 30 $ 826.06 1" B9501U 5
With OSY Gate Valves
21/2" B9105OSY 162 $ 3,061.16 $ 216.05
1
800.833.2040
ATMOSPHERIC VACUUM BREAKER- Designed to prevent CARBONATED BEVERAGE BACKFLOW PREVENTER- HOSE CONNECTION VACUUM BREAKERS-
back-siphonage. (See our model PVB above for continuous For use on vending machine water supply lines to prevent reverse Designed to prevent back-siphonage or backflow of water, with
pressure conditions.) flow of potentially contaminated water or carbonated water. vandal resistant features.
Consists of high quality stainless steel and two independently
Temp Max: 180°F (80C) Pressure Max: 125 PSI operating check valves with an integral atmospheric vent located Temp Max: 180°F (80C) Pressure Max: 125 PSI
Complies with ASSE 1001 between the checks. Complies with ASSE 1011
SIZE PART NO. WGT. LIST PRICE Temp Max: 140°F (60C) Pressure Max: 150 PSI SIZE PART NO. WGT. LIST PRICE
1/
2" B3599 1 $ 40.96 Complies with ASSE 1022 3/
4 " B800 .21 $ 8.78
3/ " B3500 2 $ 45.46
4
1” B3501 2 $ 59.12
SIZE PART NO. WGT. LIST PRICE
" B7497 .28 $ 229.05
11/4 ” B3502 3 $ 132.67
3/
8
DUAL CHECK VALVE- 316 stainless steel body with single DUAL CHECK VALVE- Brass body with single union. DUAL CHECK with ATMOSPHERIC VENT Continuous
union. Temp Max: 180°F (80C) Pressure Max: 175 PSI pressure backflow preventer with an intermediate atmospheric
Temp Max: 180°F (80C) Pressure Max: 175 PSI Complies with ASSE 1024 vent, with double union ends. Complies with ASSE 1012
Complies with ASSE 1024 Temp Max: 210°F (98C) Pressure Max: 175 PSI
SIZE PART NO. WGT. LIST PRICE
SIZE PART NO. WGT. LIST PRICE 1/
2" B8089E 2 $ 60.63 SIZE PART NO. WGT. LIST PRICE
"
3/
4 B8080SS 2 $ 127.00 3/ "
4 B8080E 2 $ 67.04 1/
2" B8289 1.3 $ 78.62
1" B8081SS 2 $ 132.23 1" B8081E 2 $ 73.19 1/ "*
2 B8289FC 1.3 $ 78.62
3/ " B8280 1.3 $ 78.90
4
3/ "* B8280FC 1.3 $ 78.90
Add “FC” to end of part number for copper sweat connection.
Note: Consult factory for additional connection configurations. 4
AIR GAP ADAPTER- The air gap adapter is designed to funnel BALL VALVE WITH TAPPING- Unleaded Bronze body ball BALL VALVE- Unleaded Bronze body ball valve, full port solid
minor relief valve discharges, due to line pressure fluctuations valve, full port solid ball standard. ball standard.
and/or minor check valve fouling into a drainage system. Cast Pressure Max: 600 PSI WOG Pressure Max: 600 PSI WOG
iron body and stainless steel bolts. SIZE PART NO. WGT. CASE QTY. LIST PRICE SIZE PART NO. WGT. CASE QTY. LIST PRICE
SIZE PART NO. WGT. LIST PRICE
" 5318E .4 1 $ 31.50
Threaded
"– 3/4"* 8273599* .05 $ 15.60
Threaded
" 5308E .4 1 $ 28.72
1/ 1/
2 2 1/
" 5310E .7 84 $ 37.90
2
"– 3/4" 8473599 .85 $ 46.41 " 5300E .7 84 $ 33.36
1/ 3/
2 4 3/
1" 5311E 1.3 48 $ 55.71
4
3/ "–2"* 8273500* .1 $ 15.62
4 1" 5301E 1.3 48 $ 53.42
3/ "–2"
4 8473500 1.5 $ 54.96 11/4 " 5312E 3 20 $ 82.26 11/4 " 5302E 3 20 $ 82.45
21/2"–3" 84735 3.7 $ 177.12 11/2" 5313E 3 20 $ 116.32 11/2" 5303E 3 20 $ 122.93
4” –10” 84737 11.35 $ 427.35 2" 5314E 5.2 12 $ 187.83 2" 5304E 5.2 12 $ 170.70
800.833.2040
$32.16 $334.25
$35.99 $292.58
$10.64 $342.85 $99.03
DCV 2 2 & 3”
RPZE II $32.21 $29.72 $30.00 $16.80 DCVE
GATE VALVES
FLANGED- Resilient wedge gate valves which meet revision of PUSH-ON- Resilient wedge gate valves which meet revision of MECHANICAL JOINT- Resilient wedge gate valves which meet
AWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125 AWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125 revision of AWWA C515 standard, with stainless steel stem.
ANSI B16.1, class 125
Temp Max: 140°F (60C) Pressure Max: 250 PSI Temp Max: 140°F (60C) Pressure Max: 250 PSI
Tapped & plugged Tapped & plugged Temp Max: 140°F (60C) Pressure Max: 250 PSI
Tapped & plugged
SIZE PART NO. WGT. LIST PRICE SIZE PART NO. WGT. LIST PRICE
21/2" 8561 38 $ 261.99 2" 8560RT 28 $ 233.51 SIZE PART NO. WGT. LIST PRICE
3" 8562 56 $ 318.04 21/2" 8561RT 42 $ 261.06 3" 8562MJ 44 $ 411.84
4" 8563 78 $ 425.80 3" 8562RT 44 $ 314.15 4" 8563MJ 69 $ 525.75
6" 8564 138 $ 701.00 4" 8563RT 69 $ 408.60 6" 8564MJ 119 $ 937.59
8" 8565 214 $ 1,158.59 6" 8564RT 119 $ 686.92 8" 8565MJ 203 $ 1,516.20
800.833.2040
10" 8566 360 $ 1,694.70 8" 8565RT 203 $ 1,205.40 10" 8566MJ 278 $ 1,954.05
12" 8567 531 $ 2,406.60 10" 8566RT 278 $ 2,085.30 12" 8567MJ 421 $ 3,074.40
14" 8568 547 $ 4,844.70 12" 8567RT 421 $ 3,129.00
16" 8569 719 $ 5,914.65
OUTSIDE SCREW & YOKE- Resilient wedge gate valves FLANGED- Resilient wedge gate valves which meet revision of GROOVED GATE VALVE- Resilient wedge gate valves with
which meet revision of AWWA C509 standard with bronze stem AWWA C509 standard with bronze stem. ANSI B16.1, class 125 Grooved x Grooved connections, bronze stem, grooved ends conforms
and are UL/FM listed. ANSI B16.1, class 125 Temp Max: 140°F (60C) Pressure Max: 200 PSI to ANSI/AWWA C606 and flanged ends conform to ANSI/ASME B16,
Temp Max: 140°F (60C) Pressure Max: 200 PSI class 125, these valves also conform to ANSI/AWWA C550.
Tapped & plugged
Tapped & plugged Temp Max: 140°F (60C) Pressure Max: 250 PSI
SIZE PART NO. WGT. LIST PRICE
21/2" 8461 51 $ 643.96
SIZE PART NO. WGT. LIST PRICE
21/2" 8461G 43 $ 501.79
SIZE PART NO. WGT. LIST PRICE
2 "
1/ 84610SY 55 $ 1,059.45 3" 8462 67 $ 755.01
3" 8462G 57 $ 582.50
2
109FG C
8" 84650SY 240 $ 3,204.60 10" 8466 360 $ 2,485.35
10" 84660SY 392 $ 4,369.05 12" 8467 531 $ 3,001.95
Discount Code
All gate valves standard open left. Consult factory for right hand opening.
www.flomatic.com 33
U.S. SALES REPS BY STATE
STATE DOMESTIC WATER SYSTEMS INDUSTRIAL MUNICIPAL
ALABAMA H2O Reps 770-295-9736 • FAX 770-982-3719 H2O Reps 770-295-9736 • FAX 770-982-3719 H2O Reps 770-295-9736 • FAX 770-982-3719
ALASKA Pacific NW Sales 503-698-1025 • FAX 503-698-2351 Pacific NW Sales 503-698-1025 • FAX 503-698-2351 Pacific NW Sales 503-698-1025 • FAX 503-698-2351
ARIZONA Desert Pacific Mktg 623-322-7902 • FAX 623-322-7903 Desert Pacific Mktg 623-322-7902 • FAX 623-322-7903 Desert Pacific Mktg 623-322-7902 • FAX 623-322-7903
ARKANSAS DJC Sales 972-790-0160 • FAX 972-790-9210 Mc Intire Management 816-588-8700 • FAX 816-746-8264 Mc Intire Management 816-588-8700 • FAX 816-746-8264
CALIFORNIA Desert Pacific Mktg 559-779-4651 • FAX 866-590-6068 Desert Pacific Mktg 559-779-4651 • FAX 866-590-6068 Desert Pacific Mktg 559-779-4651 • FAX 866-590-6068
SOUTHERN CALIFORNIA Flomatic 800-833-2040 • FAX 518-761-9798 O’Connor Sales 562-403-3848 • FAX 562-303-3858 O’Connor Sales 562-403-3848 • FAX 562-303-3858
COLORADO Maples Sales 303-371-1800 • FAX 303-371-1808 Maples Sales 303-371-1800 • FAX 303-371-1808 Maples Sales 303-371-1800 • FAX 303-371-1808
CONNECTICUT Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484
DELAWARE NH Yates 800-878-8181 • FAX 888-667-9201 NH Yates 800-878-8181 • FAX 888-667-9201 NH Yates 800-878-8181 • FAX 888-667-9201
D.C. NH Yates 800-878-8181 • FAX 888-667-9201 NH Yates 800-878-8181 • FAX 888-667-9201 NH Yates 800-878-8181 • FAX 888-667-9201
FLORIDA El Schneider 800-282-8582 • FAX 813-657-8089 L.J. Ruffin 407-291-2341 • FAX 407-291-2345 L.J. Ruffin 407-291-2341 • FAX 407-291-2345
GEORGIA H2O Reps 770-295-9736 • FAX 770-982-3719 H2O Reps 770-295-9736 • FAX 770-982-3719 H2O Reps 770-295-9736 • FAX 770-982-3719
HAWAII Hawaii Eng. Ser. 808-262-7773 • FAX 808-262-7768 Hawaii Eng. Ser. 808-262-7773 • FAX 808-262-7768 Hawaii Eng. Ser. 808-262-7773 • FAX 808-262-7768
IDAHO Pacific NW Sales 503-698-1025 • FAX 503-698-2351 Pacific NW Sales 503-698-1025 • FAX 503-698-2351 Pacific NW Sales 503-698-1025 • FAX 503-698-2351
ILLINOIS -NORTH Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Flomatic 800-833-2040 • FAX 518-761-9798 Flomatic 800-833-2040 • FAX 518-761-9798
-SOUTH Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Flo-Systems (South) 618-667-7890 • FAX 618-667-7976
INDIANA Aspinall Assoc 317-849-5757 • FAX 317-845-7967 Aspinall Assoc 317-849-5757 • FAX 317-845-7967 Watermark Engineered 317-219-4333 • FAX 317-219-3370
IOWA Schnase Sales 402-462-5889 • FAX 402-462-5969 Schnase Sales 402-462-5889 • FAX 402-462-5969 McIntire Management 816-746-6669 • FAX 816-746-8264
SALES REPS BY STATE 800.833.2040
KANSAS Schnase Sales 402-462-5889 • FAX 402-462-5969 Schnase Sales 402-462-5889 • FAX 402-462-5969 McIntire Management 816-746-6669 • FAX 816-746-8264
KENTUCKY Aspinall Assoc 317-849-5757 • FAX 317-845-7967 Aspinall Associates 317-849-5757 • FAX 317-845-7967 Aspinall Assoc 317-849-5757 • FAX 317-845-7967
LOUISIANA AH Deveney 225-892-8444 • FAX 888-329-2431 AH Deveney 225-892-8444 • FAX 888-329-2431 AH Deveney 225-892-8444 • FAX 888-329-2431
MAINE Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484
MARYLAND NH Yates 800-878-8181 • FAX 888-667-9201 NH Yates 800-878-8181 • FAX 888-667-9201 NH Yates 800-878-8181 • FAX 888-667-9201
MASSACHUSETTS Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484
MICHIGAN Herder Sales 269-342-0090 • FAX 269-385-2999 R.S. Controls 269-375-2525 • FAX 269-375-2568 Flomatic 800-833-2040 • FAX 518-761-9798
UPPER PENINSULA Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Flomatic 800-833-2040 • FAX 518-761-9798 Flomatic 800-833-2040 • FAX 518-761-9798
MINNESOTA Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Flomatic 800-833-2040 • FAX 518-761-9798
MISSISSIPPI AH Deveney 225-892-8444 • FAX 888-329-2431 AH Deveney 225-892-8444 • FAX 888-329-2431 AH Deveney 225-892-8444 • FAX 888-329-2431
MISSOURI -EAST Flomatic 800-833-2040 • FAX 518-761-9798 Flomatic 800-833-2040 • FAX 518-761-9798 Flo-Systems 618-667-7890 • FAX 618-667-7976
-WEST Schnase Sales 402-462-5889 • FAX 402-462-5969 Schnase Sales 402-462-5889 • FAX 402-462-5969 Mc Intire Management 816-588-8700 • FAX 816-746-8264
MONTANA Pacific NW Sales 503-698-1025 • FAX 503-698-2351 Pacific NW Sales 503-698-1025 • FAX 503-698-2351 Pacific NW Sales 503-698-1025 • FAX 503-698-2351
NEBRASKA Schnase Sales 402-462-5889 • FAX 402-462-5969 Schnase Sales 402-462-5889 • FAX 402-462-5969 Mc Intire Management 816-588-8700 • FAX 816-746-8264
NEVADA Desert Pacific 623-322-7902 • FAX 623-322-7903 Desert Pacific 623-322-7902 • FAX 623-322-7903 Desert Pacific 623-322-7902 • FAX 623-322-7903
NEW HAMPSHIRE Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484
NEW JERSEY NH Yates 800-878-8181 • FAX 888-667-9201 NH Yates 800-878-8181 • FAX 888-667-9201 NH Yates 800-878-8181 • FAX 888-667-9201
NEW MEXICO Maple Sales 303-371-1800 • FAX 303-371-1808 Maple Sales 303-371-1800 • FAX 303-371-1808 Maple Sales 303-371-1800 • FAX 303-371-1808
NEW YORK -UPSTATE Group One 585-655-2339 • FAX 585-655-2558 Group One 585-655-2339 • FAX 585-655-2558 Group One 585-655-2339 • FAX 585-655-2558
-NYC Flomatic 800-833-2040 • FAX 518-761-9798 Continuous Sales 516-575-6800 • FAX 516-349-8411 Continuous Sales 516-575-6800 • FAX 516-349-8411
NORTH CAROLINA Preferred Sources 704-504-3111 • FAX 704-504-3499 Preferred Sources 704-504-3111 • FAX 704-504-3499 Preferred Sources 704-504-3111 • FAX 704-504-3499
NORTH DAKOTA Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Flomatic 800-833-2040 • FAX 518-761-9798
OHIO Wynn Enterprises 814-847-2386 • FAX 814-847-2393 SVF Sales 216-741-7000 • FAX 216-741-7003 Wynn Enterprises 814-847-2386 • FAX 814-847-2393
OKLAHOMA DJC Sales 972-790-0160 • FAX 972-790-9210 Mc Intire Management 816-588-8700 • FAX 816-746-8264 Mc Intire Management 816-588-8700 • FAX 816-746-8264
OREGON Pacific NW Sales 503-698-1025 • FAX 503-698-2351 Pacific NW Sales 503-698-1025 • FAX 503-698-2351 Pacific NW Sales 503-698-1025 • FAX 503-698-2351
PENNSYLVANIA -EAST NH Yates 800-878-8181 • FAX 888-667-9201 NH Yates 800-878-8181 • FAX 888-667-9201 NH Yates 800-878-8181 • FAX 888-667-9201
-WEST Wynn Enterprises 814-847-2386 • FAX 814-847-2393 SVF Sales 216-741-7000 • FAX 216-741-7003 Wynn Enterprises 814-847-2386 • FAX 814-847-2393
RHODE ISLAND Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484
SOUTH CAROLINA Preferred Sources 704-504-3111 • FAX 704-504-3499 Preferred Sources 704-504-3111 • FAX 704-504-3499 Preferred Sources 704-504-3111 • FAX 704-504-3499
SOUTH DAKOTA Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Flomatic 800-833-2040 • FAX 518-761-9798
TENNESSEE Preferred Sources 704-504-3111 • FAX 704-504-3499 Preferred Sources 704-504-3111 • FAX 704-504-3499 Preferred Sources 704-504-3111 • FAX 704-504-3499
TEXAS DJC Sales 972-790-0160 • FAX 972-790-9210 DJC Sales 972-790-0160 • FAX 972-790-9210 TLP Solutions 817-481-8774
UTAH Intermountain Landscape 801-455-3369 • FAX 801-606-2853 Intermountain Landscape 801-455-3369 • FAX 801-606-2853 Intermountain Landscape 801-455-3369 • FAX 801-606-2853
VERMONT Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484 Harmon & Co 207-998-8100 • FAX 207-998-2484
VIRGINIA CADCO 804-739-9894 • FAX 804-739-6313 CADCO 804-739-9894 • FAX 804-739-6313 CADCO 804-739-9894 • FAX 804-739-6313
WASHINGTON Pacific NW Sales 503-698-1025 • FAX 503-698-2351 Pacific NW Sales 503-698-1025 • FAX 503-698-2351 Pacific NW Sales 503-698-1025 • FAX 503-698-2351
WEST VIRGINIA Wynn Enterprises 814-847-2386 • FAX 814-847-2393• FAX SVF Sales 216-741-7000 • FAX 216-741-7003 Wynn Enterprises 814-847-2386 • FAX 814-847-2393
WISCONSIN Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Rep Rite Burk 651-686-0181 • FAX 651-686-0803 Flomatic 800-833-2040 • FAX 518-761-9798
WYOMING Maples Sales 303-371-1800 • FAX 303-371-1808 Maples Sales 303-371-1800 • FAX 303-371-1808 Maples Sales 303-371-1800 • FAX 303-371-1808
CONDITIONS OF SALE
2. TECH SUPPORT 800-833-2040 Ext. 4 Our engineers are on stand-by for application/product support.
3. SALES & MARKETING 518-761-9797 Ext. 3 Use this line & ext. 3 to reach the sales & marketing group.
4. FAX ORDERS 800-314-3155 The fastest and easiest way is to fax us orders and inquiries.
518-761-9798
5. PHONE 518-761-9797 If you are out of the country or can’t get through, try this line.
6. WEB SITE www.flomatic.com This page will help you get the latest information on Flomatic.
7. E-MAIL ORDERS flomatic@flomatic.com This is a quick and easy way to send us a message and communicate with us.
8. U.S. Mail 15 Pruyn’s Island Drive Put it in an envelope and lick a stamp, it’s that easy.
Glens Falls, NY 12801-4424
Flomatic Conditions of Sale return authorization approval number, any ENVIRO-CHECK® OR ENVIRO FOOT VALVE
TERMS OF SALE covered by this warranty that is found to be defective within five years from the
PRICE time of sale. This warranty will be void if the product has been modified in
Prices at date of shipment will apply. Prices are subject to change without notice. any way by the purchaser, or is subjected to unreasonable use. These limited
ACCEPTANCE warranties extend to the original purchase from Flomatic only; they do not extend
Orders are accepted subject to approval of credit. Delivery is subject to strikes, to any other purchaser or transferee.
accidents, or other causes beyond our control. EXCLUSION OF WARRANTIES
ERRORS, SHORTAGES, ETC. Flomatic makes no warranties, expressed or implied, with respect to its valves,
All claims for errors, shortages, etc. must be made within 10 days of delivery. other than the expressed limited warranties described herein. The implied war-
CANCELLATIONS OF ORDERS ranties of merchantability and fitness for a particular purpose are hereby dis-
Orders for standard catalog products may be cancelled only if notice is received claimed by Flomatic . There are no warranties that extend beyond the description
prior to the date of shipment. on the face hereof.
RETURNS WARNING-NOT DESIGNED, INTENDED OR PERMITTED IN NUCLEAR
Merchandise in new and saleable condition may be returned within one year after FACILITY APPLICATIONS. FLOMATIC VALVES ARE NOT DESIGNED
purchase on a freight prepaid basis for credit upon return authorization approval OR ENGINEERED FOR USE IN ANY NUCLEAR FACILITY OR IN
number, subject to inspection and acceptance at our plant. A 25% restocking CONJUNCTION WITH ANY NUCLEAR FACILITY OR SUPPORT FACILITY.
charge and original freight allowance, if any, will be deducted from the credit. USE OF ANY OF FLOMATIC’S PRODUCTS IN ANY SUCH APPLICATION
Special order products are nonreturnable, or at manufacturer’s option. IS A MISUSE OF THESE PRODUCTS AND VOIDS ALL WARRANTIES
MINIMUM NET ORDER TERMS FREIGHT CONTAINED HEREIN, EXPRESSED AND IMPLIED, OF MERCHANTABILITY
$75.00 1% ten days, net 30 F.O.B Factory AND FITNESS FOR PARTICULAR PURPOSE.
WARRANTIES EXCLUSION OF INCIDENTAL
LIMITED ONE-YEAR WARRANTY (Complete Product Line) AND CONSEQUENTIAL DAMAGES
800.833.2040
Flomatic Corporation warrants that its products are free from defects in materials In no event shall Flomatic be liable for incidental or consequential damages,
and workmanship. Flomatic will replace any valve covered by this warranty that is including but without limitation, damages of personal injuries resulting from the
found to be defective within one year, unless otherwise stated below, from the time negligence of Flomatic, which may arise from the manufacture, sale, purchase and
of sale. This warranty will be void if the product has been modified in any way by /or use of Flomatic valves. It being intended that purchaser’s exclusive remedy is
the purchaser, or is subjected to unreasonable use. limited to replacement of defective products. Some states do not allow the exclusion
LIMITED THREE-YEAR WARRANTY (Backflow Valves) or limitation of incidental or consequential damages, or limitation on how long an
Flomatic Corporation warrants that its BACKFLOW PREVENTERS are free from implied warranty lasts, so that the above limitations may not apply to you. Contact
defects in materials and workmanship. Flomatic will replace or repair any BACK- your distributor or Flomatic at address shown if you have any questions about the
FLOW PREVENTER: , covered by this warranty that is found to be defective within coverage of this warranty or service under this warranty. This warranty gives you
three years from time of sale. This warranty will be void if the product has been specific legal rights, and you may have other rights which vary from state to state.
modified in any way by the purchaser, or is subjected to unreasonable use.
LIMITED 5-YEAR WARRANTY (Enviro-Check® and Enviro Foot Valves) NOTE: Flomatic reserves the right the change and/or alter valve
Flomatic warrants that its ENVIRO-CHECK® AND FOOT VALVES, in all sizes up to 4”, products without prior notice. Consult factory for valve specifications.
are free from defects in materials and workmanship. Flomatic will replace, upon
Manufacturing
Plant in Upstate
New York
Flomatic can accept no responsibility for possible errors in catalogues, brochures and other printed material. Flomatic reserves the right to alter its products without notice. This
also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies.
Distribution By:
e-mail: flomatic@flomatic.com
Ward valve patent #4,757,974 and #4,849,041
© 2012 Flomatic Corporation #YPRICE12 12M