FMC Technologies is the only supplier worldwide who can provide all the required state-of-the-art technology components from its own product line. The basic system module includes the entire measuring section from the supply line inlet connection to the control valve exit or, optionally, at the top or bottom loading arm.
FMC Technologies is the only supplier worldwide who can provide all the required state-of-the-art technology components from its own product line. The basic system module includes the entire measuring section from the supply line inlet connection to the control valve exit or, optionally, at the top or bottom loading arm.
FMC Technologies is the only supplier worldwide who can provide all the required state-of-the-art technology components from its own product line. The basic system module includes the entire measuring section from the supply line inlet connection to the control valve exit or, optionally, at the top or bottom loading arm.
And keep you ahead. SALES BULLETIN MEASUREMENT SOLUTIONS BENEFITS Skid mounted modular design with minimal footprint Support of up to 6 loading arms per module array Typical operating ranges from 250 L/min to 2,500 L/min Designed for bottom, top and swing arm loading applications Advanced support for additional blending streams Cost savings through factory assembly and easy to install standardized modular design Options for individual congurations Full factory ow and functionality testing providing fault-free start up Comes with all approvals and certicates ISO certied production LOADING SYSTEMS FOR THE MARKETING OF REFINED PETROLEUM PRODUCTS FMC Technologies loading system modules are based on the experience and quality of the Smith Meter brand. The Smith Meter system modules have been designed to fulll internal and logistical requirements as well as the regulations for the International and the European market: Pressure Equipment Directive 97/23/EC (PED) Directive 94/9/EC for Equipment and Protective Systems (ATEX) intended for use in potentially explosive atmospheres National Weights & Measures directives such as the European Measurement Instrumentation Directive 2004/22/EC (MID) 2 One-Stop Solutions from FMC Technologies Smith Meter is the only supplier worldwide who can provide all the required state-of-the-art technology components from its own product line. The basic system module includes the entire measuring section from the supply line inlet connection to the air purger systems required by Weights & Measures regulations and ends at the control valve exit or, optionally, at the top or bottom loading arm. ALL LOADING SYSTEMS COMPRISED OF: A perfect design on the basis of Smith Meter components as well as production processes that are entirely controlled, from the rst concept to the on-schedule turnkey delivery to the customer. Complete functional tests on typical operating conditions conducted at our in-house liquid testing facilities where the results can be validated by German Weights & Measures authorities. Consultancy and outstanding customer service through FMC Technologies global network. The technological spectrum coupled with reliable services makes FMC Technologies the preferred business partner for customers and end-users around the world. CORE COMPONENTS FROM FMC TECHNOLOGIES APS-25 Air Purger / Strainer The air release is equipped with a controlled oat valve and a strainer. PRIME 4 Volume Flow meter This measurement element is a high-precision positive displace- ment owmeter which contains an integrated pulse output. 210 Digital Flow Control Valve This hydraulic valve is equipped with solenoid valves and is digitally controlled by the load controller, precisely adjusting to every ow rate necessary. PT100 Temperature Sensor This precise temperature measurement interfaces with a cost- efcient directly connected 4-wire-resistance technology. microLoad.net or AccuLoad III.net Preset Controller These load and blending controllers control, store and document the entire loading procedure. They communicate via various interfaces, e.g. an Ethernet interface. By means of this interface, it is possible to connect to virtually any PC. License-free PC software is also provided. Card Reader The hazardous area approved card readers and approved cards are non-contact, proximity devices and permit a secure identication of users, vehicles or customers. Standard Stainless Steel Standard Frame Stainless Steel frames are entirely maintenance-free providing long service life. Design construction allows trouble-free transportation with forklifts. L-Dens 427F Ex Density Sensor The L-Dens 427F Ex Density Sensor combines high accuracy in a compact design. Continuous measurement of density, concentration and API gravity optimizes production processes and ensures a consistently high quality product. AccuPlus Additive Injection System Density Sensor AccuPlus provides inherent accuracy and precision associated with rened product marking and petroleum enhancements. With its exible options and modular construction, initial installation costs and the overall footprint are reduced. 3 The Components of a Loading/Unloading Skid 210 Digital Flow Control Valve Inline Installation Kit with Density Sensor L-Dens 427F Ex (optional) PT100 Temperature Sensor AccuLoad III.net or microLoad.net Preset Computer AccuPlus Additive Injection System Proximity Card Reader XP (optional) APS-25 Air Purger Bluetooth (optional) PRIME 4 Flow meter Air Relief and Float Sensor Diferential Pressure Gauge to Monitor Basket Cleanliness (optional) Line Pressure Gauge (Pressure Sensor 4-20 mA - optional) Junction Boxes AC and DC Key Switch for Weight + Measures Stainless Steel Frame, partially used as Conduit Fork Lift Lead Drain and Calibration Inlet Height = 2150 mm/84 3/4" Width = 950 mm/37 1/2" Depth = 970 mm/38 1/4" To provide cost savings, the systems are pre-assembled, functionality tested and ready for installation. After consultation it is possible to enhance our optimal congured base system modules with individual options without any problems. Additional systems, such as AccuPlus additive and marker injection system, prover take-of ports or special blending operation are available upon request. www.fmctechnologies.com/measurementsolutions 2013 FMC Technologies. All rights reserved. SBSM007A6E Issue/Rev. 0.2 (3/13) FMC Technologies Measurement Solutions, Inc. 500 North Sam Houston Parkway West, Suite 100 Houston, Texas 77067 USA P:+1 281.260.2190 Germany Operation Smith Meter GmbH Regentstrasse 1 25474 Ellerbek, Germany P:+49 4101.304.0 We put you rst. And keep you ahead. Example of a combination of 4 modules for one loading bay (see P&ID schematic below). Skid 4 Skid 3 Skid 2 Skid 1 Drain 1 1/2" NPT APS 4" Vent 3/4" NPT MTR 4" Outlet 4" FCV 4" TT 3 FQI 2 F 1 P P Drain 1 1/2" Inlet 4" 4" P P FCV 4" TT 3 FQI 2 F 1 4" Outlet 4" 4" P P FCV 4" TT 3 FQI 2 F 1 4" Outlet 4" 4" P P FCV 4" TT 3 FQI 2 F 1 4" Outlet 4" FEJCSRA 5 AL III Q Drain 1 1/2" NPT APS Vent 3/4" NPT Drain 1 1/2" NPT APS Vent 3/4" NPT Drain 1 1/2" NPT APS Vent 3/4" NPT MTR MTR MTR Inlet 4" Inlet 4" Inlet 4" Drain 1 1/2" Drain 1 1/2" Drain 1 1/2" LOADING SKID P&ID SCHEMATIC EXAMPLE
International Thermodynamic Tables of the Fluid State, Argon, 1971: Division of Physical Chemistry, Commission on Thermodynamics and Thermochemistry, Thermodynamic Tables Project