You are on page 1of 42

TP48200A

V100R001
Product Description


Issue 01
Date 2011-03-21
HUAWEI TECHNOLOGIES CO., LTD.

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
i

Copyright Huawei Technologies Co., Ltd. 2011. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.







Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com


TP48200A
Product Description About This Document

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
ii

About This Document
Purpose
This document describes the TP48200A in terms of the positioning, features, architecture,
application scenarios, operation and maintenance, technical specifications, installation, and
maintenance.
Intended Audience
This document is intended for:
Marketing engineers
Network planning engineers
System engineers
Site engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description

Alerts you to a high risk hazard that could, if not avoided,
result in serious injury or death.

Alerts you to a medium or low risk hazard that could, if not
avoided, result in moderate or minor injury.

Alerts you to a potentially hazardous situation that could, if not
avoided, result in equipment damage, data loss, performance
deterioration, or unanticipated results.

Provides a tip that may help you solve a problem or save time.

Provides additional information to emphasize or supplement
important points in the main text.

TP48200A
Product Description About This Document

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
iii

Change History
Changes between document issues are cumulative. The latest document issue contains all the
changes made in earlier issues.
Issue 01 (2011-03-21)
This issue is used for first office application (FOA).

TP48200A
Product Description Contents

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
iv

Contents
About This Document ....................................................................................................................... ii
1 Overview .......................................................................................................................................... 1
1.1 Name ................................................................................................................................................................ 1
1.2 Introduction ...................................................................................................................................................... 1
1.3 Positioning ....................................................................................................................................................... 2
1.4 Benefits ............................................................................................................................................................ 2
2 System Configuration ..................................................................................................................... 4
2.1 Overview .......................................................................................................................................................... 4
2.1.1 Physical Structure ................................................................................................................................... 4
2.1.2 System Composition ............................................................................................................................... 6
2.2 Cabinet ............................................................................................................................................................. 6
2.2.1 Appearance .............................................................................................................................................. 6
2.2.2 Components ............................................................................................................................................ 7
2.2.3 Features ................................................................................................................................................... 9
2.3 Temperature Control System ............................................................................................................................ 9
2.3.1 Overview ................................................................................................................................................. 9
2.3.2 Direct-Cooling Unit .............................................................................................................................. 11
2.3.3 Fan Frame ............................................................................................................................................. 12
2.3.4 Heater (Optional) .................................................................................................................................. 13
2.4 PSU ................................................................................................................................................................ 13
2.4.1 Appearance ............................................................................................................................................ 13
2.4.2 Panel...................................................................................................................................................... 14
2.4.3 Technical Specifications ........................................................................................................................ 15
2.4.4 Protection Mechanisms ......................................................................................................................... 15
2.4.5 Features ................................................................................................................................................. 16
2.5 Monitoring Unit ............................................................................................................................................. 16
2.5.1 Appearance ............................................................................................................................................ 16
2.5.2 Components .......................................................................................................................................... 17
2.5.3 Features ................................................................................................................................................. 17
2.5.4 PMU ...................................................................................................................................................... 18
2.5.5 UIM 02A ............................................................................................................................................... 21
2.5.6 Network Diagrams ................................................................................................................................ 22
TP48200A
Product Description Contents

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
v

2.6 PDU ................................................................................................................................................................ 23
2.6.1 DC PDU ................................................................................................................................................ 23
2.6.2 AC PDU ................................................................................................................................................ 24
2.6.3 Power Distribution Principles ............................................................................................................... 25
2.7 Storage Battery (Optional) ............................................................................................................................. 25
2.8 Lamp .............................................................................................................................................................. 26
3 Standards and Technical Specifications ...................................................................................... 28
3.1 Structural Specifications................................................................................................................................. 28
3.2 Environmental Specifications......................................................................................................................... 29
3.3 Temperature Control Specifications ............................................................................................................... 29
3.4 Acoustic Noise ............................................................................................................................................... 29
3.5 Safety Compliance ......................................................................................................................................... 30
3.6 EMC Compliance ........................................................................................................................................... 30
3.7 Reliability Specifications ............................................................................................................................... 30
3.8 Surge Protection ............................................................................................................................................. 30
3.9 Electrical Specifications ................................................................................................................................. 31
3.9.1 AC Electrical Specifications ................................................................................................................. 31
3.9.2 DC Electrical Specifications ................................................................................................................. 32
4 Design Standards ........................................................................................................................... 33
A Acronyms and Abbreviations ...................................................................................................... 34

TP48200A
Product Description 1 Overview

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
1

1 Overview
1.1 Name
Figure 1-1 shows the definition of the product name TP48200A.
Figure 1-1 Definition of each part in the product name


1.2 Introduction
The TP48200A is an integrated outdoor backup alternating currenttodirect current
(AC-to-DC) power system that employs 48 V, 50 A power supply units (PSUs). Physically,
the TP48200A is a cabinet that houses the air filter, fan, PSU, monitoring unit, sensor, power
distribution unit (PDU), and lamp. It may also contain the heater, Simple Network
Management Protocol (SNMP) daughter board, and storage batteries. The available space for
installing customer equipment is 20 U (889 mm [35 in.]) (with only one layer of storage
batteries) high by 19 inches (483 mm) wide.
The TP48200A is used in Class B environments and applicable to various outdoor scenarios.

Class B environments refer to:
TP48200A
Product Description 1 Overview

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
2

Rooms in which the humidity and temperature are uncontrollable
General outdoor environments where simple sun-shading measures are taken (such as under a
canopy)
Environments where humidity reaches 100% occasionally
1.3 Positioning
The TP48200A, AC power supply, automatic transfer switch (ATS), alternating current
distribution box (ACDB), storage batteries, and related devices constitute a site power
solution. Figure 1-2 shows the positioning of the TP48200A in the typical site power solution.
Figure 1-2 TP48200A in the typical site power solution


1.4 Benefits
The TP48200A supplies stable power to 48 V DC communications equipment and provides a
maximum current of 200 A. Storage batteries in the TP48200A provide backup power for
loads. The TP48200A features easy installation, intelligent hibernation, remote monitoring,
and a wide range of AC input voltage.
Easy Installation
The power monitoring unit (PMU) and PSU are hot-swappable. This facilitates the system
installation, saves maintenance time, and reduces the operational expenditure (OPEX).
Intelligent Hibernation
To improve efficiency, the TP48200A can put one or more PSUs in hibernation based on the
actaul power usage.
High Efficiency
The TP48200A uses PSUs with a 96% efficiency record.
TP48200A
Product Description 1 Overview

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
3

Remote Monitoring
OPEX is reduced when the TP48200A performs comprehensive self-management and battery
management functions by connecting to the element management system (EMS) in in-band or
out-of-band mode.
In in-band mode, the PMU communicates with the PSUs over the RS485 serial port and
with Huawei base stations over the RS232 or RS485 serial port.
In out-of-band mode, the PMU communicates with the EMS by using an SNMP
daughter board and a fast Ethernet (FE) port over the transport network.
Wide Range of AC Input Voltage
The AC input voltage of the TP48200A ranges from 90 V AC to 290 V AC phase voltage.
High-Level Regulatory Design
The TP48200A complies with Conformite Europeenne (CE) standards, the power distribution
components comply with CE standards, and the PSU complies with underwriters laboratory
(UL), CE, and Technical Watch-Over Association (TUV) standards.
Low Noise
The noise specifications comply with ETS 300 753 Class 4.1 (rural environment).
High Protection Level
The cabinet protection level is IP55.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
4

2 System Configuration
2.1 Overview
2.1.1 Physical Structure
Figure 2-1 shows the TP48200A.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
5

Figure 2-1 TP48200A

(1) Door (2) Base (3) Storage batteries
(4) Space for customer equipment (5) ACDB (6) DCDB
(7) PSU (8) Monitoring unit (9) Fan assembly
(10) Air filter (11) Heater (12) Cable outlet modules
(13) Lamp

TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
6

2.1.2 System Composition
Figure 2-2 shows the system composition of the TP48200A.
Figure 2-2 System composition of the TP48200A


2.2 Cabinet
2.2.1 Appearance
The TP48200A cabinet is made of double-shell aluminum. Dimensions (H x W x D) of the
TP48200A cabinet (excluding the base) are 1725 mm x 700 mm x 700 mm (67.91 in. x 27.56
in. x 27.56 in.). Dimensions (H x W x D) of the base are 200 mm x 700 mm x 650 mm (7.87
in. x 27.56 in. x 25.59 in.).
Figure 2-3 shows the TP48200A cabinet.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
7

Figure 2-3 TP48200A cabinet


Table 2-1 Cabinet height distribution
For... The Height Is...
Customer equipment 20 U (889 mm [35.00 in.]) (with only one layer of storage
batteries)
Storage batteries 6 U (266.7 mm [10.50 in.])
Embedded power system 8 U (355.6 mm [14.00 in.])
Fan assembly 2 U (88.9 mm [3.50 in.])

2.2.2 Components
Cable Outlet Module
A cable outlet module allows cables to route out of the TP48200A cabinet. Sufficient cable
outlets are reserved for capacity expansion. To conveniently access cables, you are advised to
place the cable outlet module on the front side at the bottom of the cabinet.
Figure 2-4 shows a cable outlet module.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
8

Figure 2-4 Cable outlet module


Figure 2-5 Cable outlet distribution


Battery Shelf
The cabinet can be equipped with battery shelves including a baffle plate. The number of
shelves depends on types of the cabinet and other equipment inside.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
9

Figure 2-6 Battery shelf


2.2.3 Features
The cabinet has the following features:
The protection level of the cabinet is IP55.
The cabinet applies to Class B environments.
Configured with the fan assembly, the cabinet has a standard heat dissipation maximum
heat dissipation capability of 1700 W.
The cabinet can be installed on the ground and maintained from the front.
2.3 Temperature Control System
2.3.1 Overview
The temperature control system of the TP48200A is composed of a direct-cooling unit and a
heater if required. The temperature control system accelerates the air ventilation and reduces
the temperature inside the cabinet by using fans and other ventilation devices. The optional
heater, keeps the internal cabinet at an optimal operating temperature.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
10

Figure 2-7 Temperature control system


Figure 2-8 Fan speed line chart


Table 2-2 Technical specifications of the temperature control system
Item Specifications
Operating temperature Without storage batteries 40C to +50C (40F to +122F)
With storage batteries 40C to +40C (40F to +104F)
Cooling capacity Maximum power: 1700 W
Acoustic noise ETS 300 753 Class 4.1 (rural environment)

TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
11

2.3.2 Direct-Cooling Unit
The direct-cooling unit consists of an air-exhaust device, an air-intake device, an air filter, and
a fan assembly. The direct-cooling unit extends the area for exchanging air inside and outside
the cabinet, speeds up air circulation, and reduces the operating temperature in the cabinet.
Air-exhaust device
The air-exhaust device is mounted in the upper part on the interior of the cabinet door, as
shown in Figure 2-9.
Air-intake device
The air-intake device as shown in Figure 2-9.
Figure 2-9 Air-exhaust device and air-intake device


Air filter
The air filter prevents most dust particles from entering the cabinet.
The TP48200A uses either an F6 or a G4 air filter. Figure 2-10 shows an F6 air filter.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
12

Figure 2-10 F6 air filter


2.3.3 Fan Assembly
The fan assembly houses two centrifugal fans. The fans direct air into the cabinet through the
lower part of the door and out of the cabinet through the upper.
shows the fan assembly. Figure 2-12 shows a centrifugal fan.
Figure 2-11 Fan assembly


Figure 2-12 Centrifugal fan


TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
13

Table 2-3 Technical specifications of the fan
Item Specifications
Rated voltage 48 V DC
Rated power 34 W

2.3.4 Heater (Optional)
The TP48200A uses the HAU02A-01 as the heater. The heater ensures that the temperature
inside the cabinet stays above 10C (14F). It starts working when the temperature inside
drops below 5C (23F), and stops when the temperature reaches 15C (59F).
Figure 2-13 shows the heater.
Figure 2-13 Heater


The maximum power of one heater is 500 W when supplied with 220 V AC power.

If the average temperature in the coldest month of the year is below 10C (14F), a heater is required.
2.4 PSU
2.4.1 Appearance
The PSU converts the AC input power into stable 48 V DC power. The TP48200A can be
configured with two, three, or four PSUs.
Figure 2-14 shows the PSU.
Figure 2-14 PSU

TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
14


2.4.2 Panel
The PSU panel provides the power light emitting diode (LED), protection LED, and fault
LED. Figure 2-15 shows the PSU panel.
Figure 2-15 PSU panel

(1) Power LED (2) Protection LED (3) Fault LED

Table 2-4 LED description
LED Color Normal
Status
Abnormal
Status
Exception Causes
Power
LED
Green Steady
on
Off

The mains supply fails due to no AC
input, AC input overvoltage, or AC
input undervoltage.

The PSU has no power output.
Protecti
on LED
Yellow Off Steady on

Overtemperature shutdown occurs
when the environment temperature
exceeds 65C (149F).

The PSU hibernates.
In this case, only the protection LED is
on.
Fault
LED
Red Off Steady on The PSU has no power output due to
output overvoltage shutdown, fan
failure, overtemperature shutdown, or
PSU failure. If the unavailable power
output is caused by a mains supply
failure due to AC input absence, AC
input overvoltage, or AC input
undervoltage, the fault LED does not
illuminate, either.

TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
15

2.4.3 Technical Specifications
Table 2-5 lists the technical specifications of the PSU.
Table 2-5 Technical specifications of the PSU
Item Specifications
Model PSU4850A
Weight 2.8 kg (6.17 lb)
Height x Width x Depth 88.9 x 103.0 x 243.0 mm (3.50 in. x 4.06 in. x 9.57 in.)
Environmental
Specifications
Operating
temperature
40C to +75C (40F to +167F)
When the temperature is between 55C (131F) and 75C
(167F), the PSU power derates.
Operating
humidity
5%95% (non-condensing)
Transportation
temperature
40C to +75C (40F to +167F)
Storage
temperature
40C to +75C (40F to +167F)
Storage
humidity
5%95%
Altitude < 4,000 m (13,123.2 ft)
If the altitude is between 3000 m (9842.4 ft) and 4000 m
(13,123.2 ft), the temperature derates by 1C (33.8F) for
each additional 200 m (656.2 ft).
Cooling With built-in fan
AC input Operating
voltage
85300 V AC
Operating
frequency
4566 Hz (rated frequency: 50 Hz and 60 Hz)
Power factor 0.99 (50% load or more)
DC output Output voltage 43.258.0 V DC (default voltage: 53.5 V DC)
Output power

Rated power: 2900 W (input voltage: 176300 V AC)

Rated power: 1200 W (input voltage: 85175 V AC)
Efficiency 96% (30%~100% load; and the highest efficiency point
can be reach 96.8%)

2.4.4 Protection Mechanisms
The TP48200A supports the following protection mechanisms:
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
16

Input overvoltage protection
Input undervoltage protection
Input overcurrent protection
Output overvoltage protection
Output short circuit protection
Output current limiting protection
Overtemperature protection
2.4.5 Features
The PSU provides the following features:
High power density
Stable operation
Intelligent hibernation
Hot swappable
2.5 Monitoring Unit
2.5.1 Appearance
The monitoring unit is 1 U (44.45 mm [1.75 in.]) high, and can be installed in a 19-inch rack.
Figure 2-16 shows the monitoring unit and Table 2-6 lists its structural specifications.
Figure 2-16 Monitoring unit


Table 2-6 Structural specifications of the monitoring unit
Item Specifications
Dimensions (H x W x
D)
43.6 mm x 442 mm x 226.4 mm (1.72 in. x 17.40 in. x 8.91 in.)
Installation scenario Standard 19-inch rack
Maintenance mode From the front

TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
17

2.5.2 Components
Table 2-7 describes the main components of the monitoring unit, including the PMU, user
interface module 02A (UIM 02A), and signal transfer board.
Table 2-7 Component description
Component Description
Signal transfer board The signal transfer board is installed at the back of the subrack, and
is used to connect the PMU and UIM 02A. It provides two 96-pin
connectors to connect the UIM 02A and a board if required for
function extension. A 125-pin connector is also provided to connect
the PMU.
PMU The PMU, which is hot-swappable and serves as the major
processing unit, performs the monitoring function. The PMU
connects to the signal transfer board through a 125-pin connector.
The PMU manages lower level equipment such as the temperature
control unit and outdoor battery cabinet.
UIM 02A The UIM 02A, which is also hot-swappable, provides various ports
such as the humidity and temperature detection port, Boolean value
input port, dry contact output.

2.5.3 Features
The monitoring module provides the following features:
Supports power management and intelligent battery management.
Support Energy saving management of PSUs.
Supports battery charge at night.
Supports automatic and manual battery control.
Records not less than 300 historical logs.
Supports the FE communication mode.
Supports nine dry contact outputs.
Supports seven digital inputs.
Supports abundant sensor ports.
Supports electronic label management.
Supports power failure monitoring.
Supports SNMP (V1/V2c/V3) protocol
Supports the Web function.
Supports current limitation for the generator at startup.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
18

2.5.4 PMU
Appearance
The PMU provides a RUN LED (green), an ALM LED (red), a liquid crystal display (LCD)
that displays the operating parameters, operating status, alarm status, configured parameters,
and controlling parameters of the DC power, AC power, PSUs and storage batteries. These
parameters are collected by the PMU. You can set parameters and control the TP48200A by
pressing the four buttons as shown in Figure 2-17.
Figure 2-17 PMU 02B

(1) RUN LED (2) ALM LED (3) LCD
(4) Buttons (5) COM port (6) RS485/RS232 port

Table 2-8 LEDs description
LED Color Status Description
RUN LED Green Blinking at 0.5 Hz The PMU communicates with the host
properly.
Blinking at 4 Hz The PMU fails to communicate with the host.
ALM
LED
Red Steady on A critical alarm is raised.
Off No critical alarm is raised.

Table 2-9 Button description
Button Description
or Allows you to view menu items and set the value of a menu item.
Cancel Returns to the previous menu without saving the settings of the current
menu item.
Enter Enters the main menu from the standby screen, enters a submenu from the
main menu, or saves the settings of a submenu item.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
19

Button Description
NOTE
After a menu is displayed, the standby screen is displayed if no button is pressed within 5 minutes.
After a menu is displayed, the LCD screen becomes dark if no button is pressed within 8 minutes.
On the standby screen, the LCD contrast can be decreased by pressing and Enter simultaneously or
be increased by pressing and Enter simultaneously.

Structural Specifications
Table 2-10 lists the structural specifications of the PMU.
Table 2-10 Structural specifications of the PMU
Item Specifications
Weight 2 kg (4.41 lb)
Dimensions (H x W x D) 40.8 mm x 100 mm x 205.3 mm (1.61 in. x 3.94 in. x 8.08 in.)

Functions
Table 2-11 Function description
Item Monitoring Parameter
Battery management High-temperature disconnection
Boost charging management
Float charging management
Discharging test
Temperature compensation
Capacity detection and reporting
Battery string and capacity configuration
Display of the installation date and maintenance date
Status detection and alerting
Current limitation for the generator at startup
Remote measure AC input voltage
Load current
Battery string current
DC busbar voltage
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
20

Item Monitoring Parameter
Battery temperature
Ambient humidity
Ambient temperature
Remote control Rectifier power-on and power-off
Battery boost and float charging
Voltage adjustment for the power supply unit (PSU)
Current limitation for the PSU
Battery connection and disconnection
Current limitation for the generator at startup
Control the lamp in the cabinet
Nine dry contact outputs
Remote signaling Mains absence
Mains overvoltage
Mains undervoltage
DC overvoltage
DC undervoltage
Load fuse blown
Overcurrent charging
Battery disconnection
Over high ambient temperature
Over low ambient temperature
Over high ambient humidity
Over low ambient humidity
Over high battery temperature
Over low battery temperature
Faulty PSU
Protected PSU
Reporting the PSU output current
Reporting alarms in the case of battery loop
disconnection
Door status switch
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
21

Item Monitoring Parameter
Water detector
Smoke detector
SPD fault detection
Displaying manufacturing information
Seven digital detector

2.5.5 UIM 02A
The UIM 02A panel provides sensor detection ports, Boolean value input ports, dry contact
outputs, and communications ports.
Figure 2-18 UIM 02A panel


Table 2-12 Port description
Port Type Silkscreen Description
Sensor port
TEM_BAT
Used by the battery temperature
sensor.
GATE Used by the door status sensor.
SMOKE Used by the smoke detector.
WATER Used by the water detector.
Analog value input port AIN Used for detecting the battery status.
Boolean value port DIN1 Used for inputting Boolean value 1.
DIN2 Used for inputting Boolean value 2.
DIN3 Used for inputting Boolean value 3.
DIN4 Used for inputting Boolean value 4.
DIN5 Used for inputting Boolean value 5.
DIN6 Used for inputting Boolean value 6.
DIN7 Used for inputting Boolean value 7.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
22

Port Type Silkscreen Description
Dry contact output port
ALM1 Used for reporting smoke alarms.
ALM2
Used for reporting door broken
alarms.
ALM3
Used for reporting PSU faults and
PSU communication faults.
ALM4
Used for reporting load fuse blown
alarms and battery fuse blown
alarms.
ALM5
Used for reporting over high battery
temperature alarms and over high
ambient temperature alarms.
ALM6 Used for reporting TCU alarms.
ALM7
Used for reporting mains failure
alarms.
ALM8
Used for controlling the head lamp
in the cabinet.
ALM9 Used for reporting SPD fault alarms.
Power electronic
manufacturing information
PELU Used for displaying electronic
manufacturing information about the
power system.


You can configure dry contacts as required.
2.5.6 Network Diagrams
Figure 2-19 shows the network diagram for remote control in in-band mode. Figure 2-20
shows the network diagram for remote control in out-of-band mode.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
23

Figure 2-19 Remote control in in-band mode


Figure 2-20 Remote control in out-of-band mode


2.6 PDU
PDUs are classified into the DC PDU and AC PDU. The DC PDU distributes DC power to
the TP48200A, while the AC PDU distributes AC power.
2.6.1 DC PDU
Figure 2-21 shows the DC PDU.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
24

Figure 2-21 DC PDU


Table 2-13 Circuit breaker distribution
For... There Are...
Battery low voltage
disconnection

Two 50 A/2P circuit breakers

Six 20 A circuit breakers

Five 10 A circuit breakers

One 3 A circuit breaker (for the lamp)
Battery Two 125 A circuit breakers

2.6.2 AC PDU
Figure 2-22 shows the AC PDU.
Figure 2-22 AC PDU


TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
25

Table 2-14 Circuit breaker distribution
For... There Are...
AC input

One 50 A/1P circuit breaker

Two 32 A/1P circuit breakers
Heater One 10 A/1P circuit breaker
Maintenance socket One 10 A maintenance socket with two holes (differential
protection of 30 mA)

2.6.3 Power Distribution Principles
Figure 2-23 shows the power distribution principles.
Figure 2-23 Power distribution principles


2.7 Storage Battery (Optional)
Storage batteries store electrical energy and power loads when the D.G. and mains supply no
power or insufficient power.
The TP48200A can be configured with four 92 Ah valve-regulated lead-acid batteries (VRLA
batteries) for power backup.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
26

Figure 2-24 VRLA batteries


Table 2-15 Technical specifications of storage batteries
Item Specifications
Weight 28 kg (61.7 lb)
Dimensions (H x W x D) 264 mm x 105 mm x 395 mm (14.4 in. x 4.13 in. x 15.6 in.)
Capacity 92 Ah
Rated voltage 12 V

NOTE

Storage batteries are not transported along with the cabinet and are configured based on the
site requirements.
2.8 Lamp
Appearance
Figure 2-25 shows the lamp.
TP48200A
Product Description 2 System Configuration

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
27

Figure 2-25 Lamp


Technical Specifications
Table 2-16 lists the technical specifications of the lamp.
Table 2-16 Technical specifications of the lamp
Item Specifications
Rated voltage 48 V DC
Rated power 1 W
Luminance 300 cd/m
2

Color of the emitted light White
Certificate UL

TP48200A
Product Description 3 Standards and Technical Specifications

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
28

3 Standards and Technical Specifications
3.1 Structural Specifications
Table 3-1 lists the structural specifications of the TP48200A cabinet.
Table 3-1 Structural specifications
Item Specifications
Dimensions of the cabinet (H x W x D,
excluding the base)
1725 mm x 700 mm x 700 mm (67.91 in. x
27.56 in. x 27.56 in.)
Dimensions of the base (H x W x D) 200 mm x 700 mm x 650 mm (7.87 in. x
27.56 in. x 25.60 in.)
Structure Double-shell aluminum cabinet
Cabinet color Light gray RAL 7035 white
Number of modules 2 to 4
Weight (excluding the PSU and storage
batteries)
150 kg (330.75 lb)
Cabling mode Routed into and out of the bottom of the
cabinet
Protection level IP55
Height for customer equipment 20 U (889 mm [35.00 in.]) (with only one
layer of storage batteries)

TP48200A
Product Description 3 Standards and Technical Specifications

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
29

3.2 Environmental Specifications
Table 3-2 shows the environmental specifications of the TP48200A.
Table 3-2 Environmental specifications
Parameter Specification
Operating temperature The ambient temperature (including solar radiation) ranges
from 40C (40F) to +50C (+122.0F).
Operating humidity 5%95% (non-condensing)
Transportation temperature 40C to +70C (40F to +158F)
Storage temperature 40C to +70C (40F to +158F)
Altitude 04000 m (013,123.2 ft)

3.3 Temperature Control Specifications
Table 3-3 lists the temperature control specifications.
Table 3-3 Temperature control specifications
Item Specifications
Cooling mode Direct-cooling
Cooling capacity 1700 W (maximum)
Acoustic noise ETS 300 753 Class 4.1 (rural environment)
Rated fan voltage 48 V DC
Rated fan power 68 W (two fans)
Rated heater voltage 220 V AC
Rated heating capability 500 W

3.4 Acoustic Noise
The TP48200A complies with ETS 300 753 Class 4.1 (rural environment).
TP48200A
Product Description 3 Standards and Technical Specifications

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
30

3.5 Safety Compliance
The TP48200A complies with IEC60950-1:2005 or EN60950-1:2006, IEC60950-22:2005 or
EN60950-22:2006, GB4943, and CE.
3.6 EMC Compliance
Table 3-4 EMC compliance
EMC Parameters Standard
EMI CE EN300386
RE EN300386
Harmonic EN61000-3-12
Fluctuation and flicker EN61000-3-11
EMS ESD IEC61000-4-2
EFT EN61000-4-4
Surge EN61000-4-5
RS EN61000-4-3
CS EN61000-4-6
DIP EN61000-4-11

3.7 Reliability Specifications
At 30C (86F), the mean time between failures (MTBF) of the TP48200A is 200,000 hours.
3.8 Surge Protection
Table 3-5 Surge protection specifications
Item Specification
(Optional) Surge protection for AC
input

Level C surge protection

Standard surge discharge current: 20 kA, 8/20 s

Maximum surge discharge current: 40 kA, 8/20 s
(Optional) Surge protection for DC
output

Differential mode: 10 kA, 8/20 s

Common mode: 20 kA, 8/20 s
TP48200A
Product Description 3 Standards and Technical Specifications

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
31

Item Specification
Surge protection for signal ports For the cables outside the cabinet:

Differential mode: 3 kA, 8/20 s

Common mode: 5 kA, 8/20 s
For the cables inside the cabinet:

Differential mode: 0.5 kA, 8/20 s

Common mode: 1 kA, 8/20 s

3.9 Electrical Specifications
3.9.1 AC Electrical Specifications
Table 3-6 AC electrical specifications
Item Specifications
AC input Input voltage

90 V AC to 290 V AC single-phase
voltage [176 V AC to 290 V AC
(corresponding to the rated output power
of the PSU)] [90 V AC to 175 V AC
(corresponding to the derated output
power of the PSU)]

Rate input phase voltage: 220 V AC
Input frequency 4565 Hz (50 Hz by default)
Power factor 0.99 (rated load)
Input cable

Three-phase, five-wire (L1, L2, L3, N,
and PE)

Single-phase, three-wire (L, N, and PE)
Maximum input current 37 A (three-phase, five-wire)
92 A (single-phase, three-wire)
Protection Overvoltage protection 300 V AC
Overvoltage recovery 290 V AC
Undervoltage protection 85 V AC
Undervoltage recovery 90 V AC
Input overcurrent
protection
The AC input circuit breaker provides
protection against overcurrent.
AC power
distribution
AC input

One 50 A/1P circuit breaker

Two 32 A/1P circuit breakers
TP48200A
Product Description 3 Standards and Technical Specifications

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
32

Item Specifications
AC output

One 10 A maintenance socket with two
holes

One 10 A/1P circuit breaker (for the
heater)

3.9.2 DC Electrical Specifications
Table 3-7 DC electrical specifications
Item Specifications
DC output Output voltage range 43.257.6 V DC
Rated output voltage 53.5 V DC
Maximum output power 11,600 W (for single-phase input voltage
from 176 V AC to 290 V AC)
4800 W (for single-phase input voltage
from 90 V AC to 175 V AC)
Efficiency 95% (50%100% load)
Protection Overvoltage protection The TP48200A raises an alarm when the
output voltage exceeds the DC overvoltage
alarm threshold (a value within the range of
58.5 V to 60.5 V by default). If there is
output overvoltage, the PSUs are locked
automatically.
Overtemperature
protection
The TP48200A recovers automatically
when the ambient temperature drops below
65C (149F).
DC power
distribution
Load shutdown Two 50 A/2P circuit breakers
Six 20 A circuit breakers
Five 10 A circuit breakers
One 3 A circuit breaker (for the lamp)
Battery Two125 A circuit breakers
TP48200A
Product Description 4 Design Standards

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
33

4 Design Standards
The TP48200A complies with ETS 300 119 and CE.
Table 4-1 lists the TP48200A components and design standards compliance.
Table 4-1 Design standards compliance for components
Component Certificate and Standard
PSU UL, TUV, and CE
PDUs CE

TP48200A
Product Description A Acronyms and Abbreviations

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
34

A Acronyms and Abbreviations
A
AC alternating current
ACDB alternating current distribution box
ATS automatic transfer switch

C
CE Conformite Europeenne
CS Conducted Susceptibility

D
D.G. diesel generator
DC direct current
DIP

E
EFT electrical fast transient
EMC electromagnetic compatibility
EMI electromagnetic interference
EMS element management system
ESD electrostatic discharge
EN European Standard
ETS European Telecommunication Standards

F
TP48200A
Product Description A Acronyms and Abbreviations

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
35

FE fast Ethernet
FOA first office application

I
IEC International Electrotechnical Commission
IP International Protection

L
LCD liquid crystal display
LED light emitting diode

M
MTBF mean time between failures

O
OPEX operational expenditure

P
PDU power distribution unit
PE protective earth
PMU power monitoring unit
PSU power supply unit

R
RE radio emission
RoHS restriction of the use of certain hazardous substances

S
SNMP Simple Network Management Protocol
SPD surge protection device

T
TCU temperature control unit
TP48200A
Product Description A Acronyms and Abbreviations

Issue 01 (2011-03-21) Huawei Proprietary and Confidential
Copyright Huawei Technologies Co., Ltd
36

TUV Technical Watch-Over Association

U
UIM user interface module
UL underwriters laboratory

V
VRLA valve-regulated lead-acid

You might also like